diff options
Diffstat (limited to 'arch/arm')
113 files changed, 2967 insertions, 2077 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2c3bdce..318c1f9 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -49,7 +49,6 @@ config ARM select HAVE_REGS_AND_STACK_ACCESS_API select HAVE_SYSCALL_TRACEPOINTS select HAVE_UID16 - select VIRT_TO_BUS select KTIME_SCALAR select PERF_USE_VMALLOC select RTC_LIB @@ -474,12 +473,14 @@ config ARCH_MXS select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select CLKSRC_MMIO + select CLKSRC_OF select COMMON_CLK select GENERIC_CLOCKEVENTS select HAVE_CLK_PREPARE select MULTI_IRQ_HANDLER select PINCTRL select SPARSE_IRQ + select STMP_DEVICE select USE_OF help Support for Freescale MXS-based family of processors @@ -674,6 +675,7 @@ config ARCH_TEGRA select HAVE_CLK select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 + select SOC_BUS select SPARSE_IRQ select USE_OF help @@ -743,6 +745,7 @@ config ARCH_RPC select NEED_MACH_IO_H select NEED_MACH_MEMORY_H select NO_IOPORT + select VIRT_TO_BUS help On the Acorn Risc-PC, Linux can support the internal IDE disk and CD-ROM interface, serial and parallel port, and the floppy drive. @@ -878,6 +881,7 @@ config ARCH_SHARK select ISA_DMA select NEED_MACH_MEMORY_H select PCI + select VIRT_TO_BUS select ZONE_DMA help Support for the StrongARM based Digital DNARD machine, also known @@ -1005,12 +1009,12 @@ config ARCH_MULTI_V4_V5 bool config ARCH_MULTI_V6 - bool "ARMv6 based platforms (ARM11, Scorpion, ...)" + bool "ARMv6 based platforms (ARM11)" select ARCH_MULTI_V6_V7 select CPU_V6 config ARCH_MULTI_V7 - bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)" + bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)" default y select ARCH_MULTI_V6_V7 select ARCH_VEXPRESS @@ -1461,10 +1465,6 @@ config ISA_DMA bool select ISA_DMA_API -config ARCH_NO_VIRT_TO_BUS - def_bool y - depends on !ARCH_RPC && !ARCH_NETWINDER && !ARCH_SHARK - # Select ISA DMA interface config ISA_DMA_API bool @@ -1596,6 +1596,7 @@ config HAVE_ARM_ARCH_TIMER config HAVE_ARM_TWD bool depends on SMP + select CLKSRC_OF if OF help This options enables support for the ARM timer and watchdog unit diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index ecfcdba..9b31f43 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -495,6 +495,7 @@ config DEBUG_IMX_UART_PORT DEBUG_IMX53_UART || \ DEBUG_IMX6Q_UART default 1 + depends on ARCH_MXC help Choose UART port on which kernel low-level debug messages should be output. diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index aa98e64..a98c0d5 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -238,8 +238,32 @@ nand { pinctrl_nand: nand-0 { atmel,pins = - <3 4 0x0 0x1 /* PD5 gpio RDY pin pull_up */ - 3 5 0x0 0x1>; /* PD4 gpio enable pin pull_up */ + <3 0 0x1 0x0 /* PD0 periph A Read Enable */ + 3 1 0x1 0x0 /* PD1 periph A Write Enable */ + 3 2 0x1 0x0 /* PD2 periph A Address Latch Enable */ + 3 3 0x1 0x0 /* PD3 periph A Command Latch Enable */ + 3 4 0x0 0x1 /* PD4 gpio Chip Enable pin pull_up */ + 3 5 0x0 0x1 /* PD5 gpio RDY/BUSY pin pull_up */ + 3 6 0x1 0x0 /* PD6 periph A Data bit 0 */ + 3 7 0x1 0x0 /* PD7 periph A Data bit 1 */ + 3 8 0x1 0x0 /* PD8 periph A Data bit 2 */ + 3 9 0x1 0x0 /* PD9 periph A Data bit 3 */ + 3 10 0x1 0x0 /* PD10 periph A Data bit 4 */ + 3 11 0x1 0x0 /* PD11 periph A Data bit 5 */ + 3 12 0x1 0x0 /* PD12 periph A Data bit 6 */ + 3 13 0x1 0x0>; /* PD13 periph A Data bit 7 */ + }; + + pinctrl_nand_16bits: nand_16bits-0 { + atmel,pins = + <3 14 0x1 0x0 /* PD14 periph A Data bit 8 */ + 3 15 0x1 0x0 /* PD15 periph A Data bit 9 */ + 3 16 0x1 0x0 /* PD16 periph A Data bit 10 */ + 3 17 0x1 0x0 /* PD17 periph A Data bit 11 */ + 3 18 0x1 0x0 /* PD18 periph A Data bit 12 */ + 3 19 0x1 0x0 /* PD19 periph A Data bit 13 */ + 3 20 0x1 0x0 /* PD20 periph A Data bit 14 */ + 3 21 0x1 0x0>; /* PD21 periph A Data bit 15 */ }; }; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index e1347fc..1a62bcf 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -275,18 +275,27 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x12680000 0x1000>; interrupts = <0 35 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; pdma1: pdma@12690000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x12690000 0x1000>; interrupts = <0 36 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; mdma1: mdma@12850000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x12850000 0x1000>; interrupts = <0 34 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; }; }; }; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 5f3562a..9a99755 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -142,12 +142,18 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x120000 0x1000>; interrupts = <0 34 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; pdma1: pdma@121B0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x121000 0x1000>; interrupts = <0 35 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; }; diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index 035c13f..da0588a 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -59,8 +59,33 @@ lcdif@80030000 { pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a>; - panel-enable-gpios = <&gpio1 18 0>; + lcd-supply = <®_lcd_3v3>; + display = <&display>; status = "okay"; + + display: display { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9200000>; + hactive = <480>; + vactive = <272>; + hback-porch = <15>; + hfront-porch = <8>; + vback-porch = <12>; + vfront-porch = <4>; + hsync-len = <1>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; }; }; @@ -95,6 +120,15 @@ regulator-max-microvolt = <3300000>; gpio = <&gpio1 29 0>; }; + + reg_lcd_3v3: lcd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "lcd-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 18 0>; + enable-active-high; + }; }; backlight { diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index e7484e4..d107c4a 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -29,6 +29,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; bus-width = <4>; + broken-cd; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 56afcf4..73fd7d0 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -49,9 +49,15 @@ reg = <0x80000000 0x2000>; }; - dma-apbh@80004000 { + dma_apbh: dma-apbh@80004000 { compatible = "fsl,imx23-dma-apbh"; reg = <0x80004000 0x2000>; + interrupts = <0 14 20 0 + 13 13 13 13>; + interrupt-names = "empty", "ssp0", "ssp1", "empty", + "gpmi0", "gpmi1", "gpmi2", "gpmi3"; + #dma-cells = <1>; + dma-channels = <8>; clocks = <&clks 15>; }; @@ -70,6 +76,8 @@ interrupt-names = "gpmi-dma", "bch"; clocks = <&clks 34>; clock-names = "gpmi_io"; + dmas = <&dma_apbh 4>; + dma-names = "rx-tx"; fsl,gpmi-dma-channel = <4>; status = "disabled"; }; @@ -78,6 +86,8 @@ reg = <0x80010000 0x2000>; interrupts = <15 14>; clocks = <&clks 33>; + dmas = <&dma_apbh 1>; + dma-names = "rx-tx"; fsl,ssp-dma-channel = <1>; status = "disabled"; }; @@ -295,6 +305,7 @@ }; digctl@8001c000 { + compatible = "fsl,imx23-digctl"; reg = <0x8001c000 2000>; status = "disabled"; }; @@ -304,9 +315,19 @@ status = "disabled"; }; - dma-apbx@80024000 { + dma_apbx: dma-apbx@80024000 { compatible = "fsl,imx23-dma-apbx"; reg = <0x80024000 0x2000>; + interrupts = <7 5 9 26 + 19 0 25 23 + 60 58 9 0 + 0 0 0 0>; + interrupt-names = "audio-adc", "audio-dac", "spdif-tx", "i2c", + "saif0", "empty", "auart0-rx", "auart0-tx", + "auart1-rx", "auart1-tx", "saif1", "empty", + "empty", "empty", "empty", "empty"; + #dma-cells = <1>; + dma-channels = <16>; clocks = <&clks 16>; }; @@ -321,6 +342,7 @@ }; ocotp@8002c000 { + compatible = "fsl,ocotp"; reg = <0x8002c000 0x2000>; status = "disabled"; }; @@ -342,6 +364,8 @@ reg = <0x80034000 0x2000>; interrupts = <2 20>; clocks = <&clks 33>; + dmas = <&dma_apbh 2>; + dma-names = "rx-tx"; fsl,ssp-dma-channel = <2>; status = "disabled"; }; @@ -360,13 +384,15 @@ ranges; clks: clkctrl@80040000 { - compatible = "fsl,imx23-clkctrl"; + compatible = "fsl,imx23-clkctrl", "fsl,clkctrl"; reg = <0x80040000 0x2000>; #clock-cells = <1>; }; saif0: saif@80042000 { reg = <0x80042000 0x2000>; + dmas = <&dma_apbx 4>; + dma-names = "rx-tx"; status = "disabled"; }; @@ -377,16 +403,22 @@ saif1: saif@80046000 { reg = <0x80046000 0x2000>; + dmas = <&dma_apbx 10>; + dma-names = "rx-tx"; status = "disabled"; }; audio-out@80048000 { reg = <0x80048000 0x2000>; + dmas = <&dma_apbx 1>; + dma-names = "tx"; status = "disabled"; }; audio-in@8004c000 { reg = <0x8004c000 0x2000>; + dmas = <&dma_apbx 0>; + dma-names = "rx"; status = "disabled"; }; @@ -399,11 +431,15 @@ spdif@80054000 { reg = <0x80054000 2000>; + dmas = <&dma_apbx 2>; + dma-names = "tx"; status = "disabled"; }; i2c@80058000 { reg = <0x80058000 0x2000>; + dmas = <&dma_apbx 3>; + dma-names = "rx-tx"; status = "disabled"; }; @@ -426,6 +462,7 @@ compatible = "fsl,imx23-timrot", "fsl,timrot"; reg = <0x80068000 0x2000>; interrupts = <28 29 30 31>; + clocks = <&clks 28>; }; auart0: serial@8006c000 { @@ -433,6 +470,8 @@ reg = <0x8006c000 0x2000>; interrupts = <24 25 23>; clocks = <&clks 32>; + dmas = <&dma_apbx 6>, <&dma_apbx 7>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -441,6 +480,8 @@ reg = <0x8006e000 0x2000>; interrupts = <59 60 58>; clocks = <&clks 32>; + dmas = <&dma_apbx 8>, <&dma_apbx 9>; + dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts index 6d8865b..3d905d1 100644 --- a/arch/arm/boot/dts/imx28-apf28dev.dts +++ b/arch/arm/boot/dts/imx28-apf28dev.dts @@ -72,7 +72,32 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_16bit_pins_a &lcdif_pins_apf28dev>; + display = <&display>; status = "okay"; + + display: display { + bits-per-pixel = <16>; + bus-width = <16>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33000033>; + hactive = <800>; + vactive = <480>; + hback-porch = <96>; + hfront-porch = <96>; + vback-porch = <20>; + vfront-porch = <21>; + hsync-len = <64>; + vsync-len = <4>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts index 5171667..43bf3c7 100644 --- a/arch/arm/boot/dts/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -94,7 +94,32 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_apx4>; + display = <&display>; status = "okay"; + + display: display { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <30000000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hfront-porch = <40>; + vback-porch = <32>; + vfront-porch = <13>; + hsync-len = <48>; + vsync-len = <3>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index a0d3e9f..063e620 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -30,7 +30,6 @@ reg = <0>; fsl,pinmux-ids = < 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ - 0x1153 /* MX28_PAD_LCD_D22__GPIO_1_21 */ 0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */ 0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */ 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */ @@ -120,13 +119,48 @@ fsl,voltage = <1>; fsl,pull-up = <0>; }; + + w1_gpio_pins: w1-gpio@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <0>; /* 0 will enable the keeper */ + }; }; lcdif@80030000 { pinctrl-names = "default"; pinctrl-0 = <&lcdif_18bit_pins_cfa10049 &lcdif_pins_cfa10049>; + display = <&display>; status = "okay"; + + display: display { + bits-per-pixel = <32>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9216000>; + hactive = <320>; + vactive = <480>; + hback-porch = <2>; + hfront-porch = <2>; + vback-porch = <2>; + vfront-porch = <2>; + hsync-len = <15>; + vsync-len = <15>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; }; }; @@ -183,6 +217,11 @@ usbphy1: usbphy@8007e000 { status = "okay"; }; + + lradc@80050000 { + status = "okay"; + fsl,lradc-touchscreen-wires = <4>; + }; }; }; @@ -304,5 +343,14 @@ pwms = <&pwm 3 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; + + }; + + onewire@0 { + compatible = "w1-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&w1_gpio_pins>; + status = "okay"; + gpios = <&gpio1 21 0>; }; }; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 2da316e..3637bf3 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -123,8 +123,33 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_evk>; - panel-enable-gpios = <&gpio3 30 0>; + lcd-supply = <®_lcd_3v3>; + display = <&display>; status = "okay"; + + display: display { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33500000>; + hactive = <800>; + vactive = <480>; + hback-porch = <89>; + hfront-porch = <164>; + vback-porch = <23>; + vfront-porch = <10>; + hsync-len = <10>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; }; can0: can@80032000 { @@ -285,6 +310,15 @@ gpio = <&gpio3 8 0>; enable-active-high; }; + + reg_lcd_3v3: lcd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "lcd-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 30 0>; + enable-active-high; + }; }; sound { diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index 6ce3d17..5f0ba99 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -119,7 +119,32 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_m28>; + display = <&display>; status = "okay"; + + display: display { + bits-per-pixel = <16>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33260000>; + hactive = <800>; + vactive = <480>; + hback-porch = <0>; + hfront-porch = <256>; + vback-porch = <0>; + vfront-porch = <45>; + hsync-len = <1>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; }; can0: can@80032000 { @@ -221,6 +246,8 @@ phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; + clocks = <&clks 57>, <&clks 57>; + clock-names = "ipg", "ahb"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 7ba4966..600f7cb 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -61,12 +61,24 @@ hsadc@80002000 { reg = <0x80002000 0x2000>; interrupts = <13 87>; + dmas = <&dma_apbh 12>; + dma-names = "rx"; status = "disabled"; }; - dma-apbh@80004000 { + dma_apbh: dma-apbh@80004000 { compatible = "fsl,imx28-dma-apbh"; reg = <0x80004000 0x2000>; + interrupts = <82 83 84 85 + 88 88 88 88 + 88 88 88 88 + 87 86 0 0>; + interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3", + "gpmi0", "gmpi1", "gpmi2", "gmpi3", + "gpmi4", "gmpi5", "gpmi6", "gmpi7", + "hsadc", "lcdif", "empty", "empty"; + #dma-cells = <1>; + dma-channels = <16>; clocks = <&clks 25>; }; @@ -86,6 +98,8 @@ interrupt-names = "gpmi-dma", "bch"; clocks = <&clks 50>; clock-names = "gpmi_io"; + dmas = <&dma_apbh 4>; + dma-names = "rx-tx"; fsl,gpmi-dma-channel = <4>; status = "disabled"; }; @@ -96,6 +110,8 @@ reg = <0x80010000 0x2000>; interrupts = <96 82>; clocks = <&clks 46>; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; fsl,ssp-dma-channel = <0>; status = "disabled"; }; @@ -106,6 +122,8 @@ reg = <0x80012000 0x2000>; interrupts = <97 83>; clocks = <&clks 47>; + dmas = <&dma_apbh 1>; + dma-names = "rx-tx"; fsl,ssp-dma-channel = <1>; status = "disabled"; }; @@ -116,6 +134,8 @@ reg = <0x80014000 0x2000>; interrupts = <98 84>; clocks = <&clks 48>; + dmas = <&dma_apbh 2>; + dma-names = "rx-tx"; fsl,ssp-dma-channel = <2>; status = "disabled"; }; @@ -126,6 +146,8 @@ reg = <0x80016000 0x2000>; interrupts = <99 85>; clocks = <&clks 49>; + dmas = <&dma_apbh 3>; + dma-names = "rx-tx"; fsl,ssp-dma-channel = <3>; status = "disabled"; }; @@ -647,6 +669,7 @@ }; digctl@8001c000 { + compatible = "fsl,imx28-digctl"; reg = <0x8001c000 0x2000>; interrupts = <89>; status = "disabled"; @@ -657,9 +680,19 @@ status = "disabled"; }; - dma-apbx@80024000 { + dma_apbx: dma-apbx@80024000 { compatible = "fsl,imx28-dma-apbx"; reg = <0x80024000 0x2000>; + interrupts = <78 79 66 0 + 80 81 68 69 + 70 71 72 73 + 74 75 76 77>; + interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty", + "saif0", "saif1", "i2c0", "i2c1", + "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx", + "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx"; + #dma-cells = <1>; + dma-channels = <16>; clocks = <&clks 26>; }; @@ -676,6 +709,7 @@ }; ocotp@8002c000 { + compatible = "fsl,ocotp"; reg = <0x8002c000 0x2000>; status = "disabled"; }; @@ -690,6 +724,8 @@ reg = <0x80030000 0x2000>; interrupts = <38 86>; clocks = <&clks 55>; + dmas = <&dma_apbh 13>; + dma-names = "rx"; status = "disabled"; }; @@ -755,7 +791,7 @@ ranges; clks: clkctrl@80040000 { - compatible = "fsl,imx28-clkctrl"; + compatible = "fsl,imx28-clkctrl", "fsl,clkctrl"; reg = <0x80040000 0x2000>; #clock-cells = <1>; }; @@ -765,6 +801,8 @@ reg = <0x80042000 0x2000>; interrupts = <59 80>; clocks = <&clks 53>; + dmas = <&dma_apbx 4>; + dma-names = "rx-tx"; fsl,saif-dma-channel = <4>; status = "disabled"; }; @@ -779,6 +817,8 @@ reg = <0x80046000 0x2000>; interrupts = <58 81>; clocks = <&clks 54>; + dmas = <&dma_apbx 5>; + dma-names = "rx-tx"; fsl,saif-dma-channel = <5>; status = "disabled"; }; @@ -794,6 +834,8 @@ spdif@80054000 { reg = <0x80054000 0x2000>; interrupts = <45 66>; + dmas = <&dma_apbx 2>; + dma-names = "tx"; status = "disabled"; }; @@ -810,6 +852,8 @@ reg = <0x80058000 0x2000>; interrupts = <111 68>; clock-frequency = <100000>; + dmas = <&dma_apbx 6>; + dma-names = "rx-tx"; fsl,i2c-dma-channel = <6>; status = "disabled"; }; @@ -821,6 +865,8 @@ reg = <0x8005a000 0x2000>; interrupts = <110 69>; clock-frequency = <100000>; + dmas = <&dma_apbx 7>; + dma-names = "rx-tx"; fsl,i2c-dma-channel = <7>; status = "disabled"; }; @@ -838,12 +884,15 @@ compatible = "fsl,imx28-timrot", "fsl,timrot"; reg = <0x80068000 0x2000>; interrupts = <48 49 50 51>; + clocks = <&clks 26>; }; auart0: serial@8006a000 { compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006a000 0x2000>; interrupts = <112 70 71>; + dmas = <&dma_apbx 8>, <&dma_apbx 9>; + dma-names = "rx", "tx"; fsl,auart-dma-channel = <8 9>; clocks = <&clks 45>; status = "disabled"; @@ -853,6 +902,8 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006c000 0x2000>; interrupts = <113 72 73>; + dmas = <&dma_apbx 10>, <&dma_apbx 11>; + dma-names = "rx", "tx"; clocks = <&clks 45>; status = "disabled"; }; @@ -861,6 +912,8 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006e000 0x2000>; interrupts = <114 74 75>; + dmas = <&dma_apbx 12>, <&dma_apbx 13>; + dma-names = "rx", "tx"; clocks = <&clks 45>; status = "disabled"; }; @@ -869,6 +922,8 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x80070000 0x2000>; interrupts = <115 76 77>; + dmas = <&dma_apbx 14>, <&dma_apbx 15>; + dma-names = "rx", "tx"; clocks = <&clks 45>; status = "disabled"; }; @@ -877,6 +932,8 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x80072000 0x2000>; interrupts = <116 78 79>; + dmas = <&dma_apbx 0>, <&dma_apbx 1>; + dma-names = "rx", "tx"; clocks = <&clks 45>; status = "disabled"; }; @@ -940,8 +997,8 @@ compatible = "fsl,imx28-fec"; reg = <0x800f0000 0x4000>; interrupts = <101>; - clocks = <&clks 57>, <&clks 57>; - clock-names = "ipg", "ahb"; + clocks = <&clks 57>, <&clks 57>, <&clks 64>; + clock-names = "ipg", "ahb", "enet_out"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 06ec460..59e970f 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -65,9 +65,13 @@ interrupt-parent = <&intc>; ranges; - dma-apbh@00110000 { + dma_apbh: dma-apbh@00110000 { compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; reg = <0x00110000 0x2000>; + interrupts = <0 13 0x04>, <0 13 0x04>, <0 13 0x04>, <0 13 0x04>; + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; + #dma-cells = <1>; + dma-channels = <4>; clocks = <&clks 106>; }; @@ -83,6 +87,8 @@ <&clks 150>, <&clks 149>; clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch"; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; fsl,gpmi-dma-channel = <0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index a30aca6..72c1f27 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -10,12 +10,915 @@ reg = <0x80000000 0x40000000>; }; + pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + clk1_out_pw4 { + nvidia,pins = "clk1_out_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + dap1_din_pn1 { + nvidia,pins = "dap1_din_pn1"; + nvidia,function = "i2s0"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + dap1_dout_pn2 { + nvidia,pins = "dap1_dout_pn2", + "dap1_fs_pn0", + "dap1_sclk_pn3"; + nvidia,function = "i2s0"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + dap2_din_pa4 { + nvidia,pins = "dap2_din_pa4"; + nvidia,function = "i2s1"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + dap2_dout_pa5 { + nvidia,pins = "dap2_dout_pa5", + "dap2_fs_pa2", + "dap2_sclk_pa3"; + nvidia,function = "i2s1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + dap4_din_pp5 { + nvidia,pins = "dap4_din_pp5", + "dap4_dout_pp6", + "dap4_fs_pp4", + "dap4_sclk_pp7"; + nvidia,function = "i2s3"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + dvfs_pwm_px0 { + nvidia,pins = "dvfs_pwm_px0", + "dvfs_clk_px2"; + nvidia,function = "cldvfs"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0", + "ulpi_data0_po1", + "ulpi_data1_po2", + "ulpi_data2_po3", + "ulpi_data3_po4", + "ulpi_data4_po5", + "ulpi_data5_po6", + "ulpi_data6_po7", + "ulpi_data7_po0"; + nvidia,function = "ulpi"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + ulpi_dir_py1 { + nvidia,pins = "ulpi_dir_py1", + "ulpi_nxt_py2"; + nvidia,function = "ulpi"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + ulpi_stp_py3 { + nvidia,pins = "ulpi_stp_py3"; + nvidia,function = "ulpi"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + nvidia,lock = <0>; + nvidia,open-drain = <0>; + }; + cam_mclk_pcc0 { + nvidia,pins = "cam_mclk_pcc0", + "pbb0"; + nvidia,function = "vi_alt3"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + nvidia,lock = <0>; + }; + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5", + "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + nvidia,lock = <0>; + nvidia,open-drain = <0>; + }; + gmi_a16_pj7 { + nvidia,pins = "gmi_a16_pj7"; + nvidia,function = "uartd"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + gmi_a17_pb0 { + nvidia,pins = "gmi_a17_pb0", + "gmi_a18_pb1"; + nvidia,function = "uartd"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + gmi_a19_pk7 { + nvidia,pins = "gmi_a19_pk7"; + nvidia,function = "uartd"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + gmi_ad5_pg5 { + nvidia,pins = "gmi_ad5_pg5", + "gmi_cs6_n_pi3", + "gmi_wr_n_pi0"; + nvidia,function = "spi4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + gmi_ad6_pg6 { + nvidia,pins = "gmi_ad6_pg6", + "gmi_ad7_pg7"; + nvidia,function = "spi4"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + gmi_ad12_ph4 { + nvidia,pins = "gmi_ad12_ph4"; + nvidia,function = "rsvd4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + gmi_ad9_ph1 { + nvidia,pins = "gmi_ad9_ph1"; + nvidia,function = "pwm1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + gmi_cs1_n_pj2 { + nvidia,pins = "gmi_cs1_n_pj2", + "gmi_oe_n_pi1"; + nvidia,function = "soc"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + clk2_out_pw5 { + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "extperiph2"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + sdmmc1_wp_n_pv3 { + nvidia,pins = "sdmmc1_wp_n_pv3"; + nvidia,function = "spi4"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4", + "kb_col4_pq4", + "sdmmc3_clk_lb_out_pee4", + "sdmmc3_clk_lb_in_pee5"; + nvidia,function = "sdmmc3"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + sdmmc4_cmd_pt7 { + nvidia,pins = "sdmmc4_cmd_pt7", + "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + clk_32k_out_pa0 { + nvidia,pins = "clk_32k_out_pa0"; + nvidia,function = "blink"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + kb_col0_pq0 { + nvidia,pins = "kb_col0_pq0", + "kb_col1_pq1", + "kb_col2_pq2", + "kb_row0_pr0", + "kb_row1_pr1", + "kb_row2_pr2"; + nvidia,function = "kbc"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + dap3_din_pp1 { + nvidia,pins = "dap3_din_pp1", + "dap3_sclk_pp3"; + nvidia,function = "displayb"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <0>; + }; + pv0 { + nvidia,pins = "pv0"; + nvidia,function = "rsvd4"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <0>; + }; + kb_row7_pr7 { + nvidia,pins = "kb_row7_pr7"; + nvidia,function = "rsvd2"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + kb_row10_ps2 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "uarta"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + kb_row9_ps1 { + nvidia,pins = "kb_row9_ps1"; + nvidia,function = "uarta"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + nvidia,lock = <0>; + nvidia,open-drain = <0>; + }; + sys_clk_req_pz5 { + nvidia,pins = "sys_clk_req_pz5"; + nvidia,function = "sysclk"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + core_pwr_req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "pwron"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + cpu_pwr_req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "cpu"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + pwr_int_n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + reset_out_n { + nvidia,pins = "reset_out_n"; + nvidia,function = "reset_out_n"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + clk3_out_pee0 { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + gen1_i2c_scl_pc4 { + nvidia,pins = "gen1_i2c_scl_pc4", + "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + nvidia,lock = <0>; + nvidia,open-drain = <0>; + }; + uart2_cts_n_pj5 { + nvidia,pins = "uart2_cts_n_pj5"; + nvidia,function = "uartb"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + uart2_rts_n_pj6 { + nvidia,pins = "uart2_rts_n_pj6"; + nvidia,function = "uartb"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + uart2_rxd_pc3 { + nvidia,pins = "uart2_rxd_pc3"; + nvidia,function = "irda"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + uart2_txd_pc2 { + nvidia,pins = "uart2_txd_pc2"; + nvidia,function = "irda"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + uart3_cts_n_pa1 { + nvidia,pins = "uart3_cts_n_pa1", + "uart3_rxd_pw7"; + nvidia,function = "uartc"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + uart3_rts_n_pc0 { + nvidia,pins = "uart3_rts_n_pc0", + "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + owr { + nvidia,pins = "owr"; + nvidia,function = "owr"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + hdmi_cec_pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + nvidia,lock = <0>; + nvidia,open-drain = <0>; + }; + ddc_scl_pv4 { + nvidia,pins = "ddc_scl_pv4", + "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + nvidia,lock = <0>; + nvidia,rcv-sel = <1>; + }; + spdif_in_pk6 { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "usb"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + nvidia,lock = <0>; + }; + usb_vbus_en0_pn4 { + nvidia,pins = "usb_vbus_en0_pn4"; + nvidia,function = "usb"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + nvidia,lock = <0>; + nvidia,open-drain = <1>; + }; + gpio_x6_aud_px6 { + nvidia,pins = "gpio_x6_aud_px6"; + nvidia,function = "spi6"; + nvidia,pull = <2>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + gpio_x4_aud_px4 { + nvidia,pins = "gpio_x4_aud_px4", + "gpio_x7_aud_px7"; + nvidia,function = "rsvd1"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + gpio_x5_aud_px5 { + nvidia,pins = "gpio_x5_aud_px5"; + nvidia,function = "rsvd1"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + gpio_w2_aud_pw2 { + nvidia,pins = "gpio_w2_aud_pw2"; + nvidia,function = "rsvd2"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + gpio_w3_aud_pw3 { + nvidia,pins = "gpio_w3_aud_pw3"; + nvidia,function = "spi6"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + gpio_x1_aud_px1 { + nvidia,pins = "gpio_x1_aud_px1"; + nvidia,function = "rsvd4"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + gpio_x3_aud_px3 { + nvidia,pins = "gpio_x3_aud_px3"; + nvidia,function = "rsvd4"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + dap3_fs_pp0 { + nvidia,pins = "dap3_fs_pp0"; + nvidia,function = "i2s2"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + dap3_dout_pp2 { + nvidia,pins = "dap3_dout_pp2"; + nvidia,function = "i2s2"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + pv1 { + nvidia,pins = "pv1"; + nvidia,function = "rsvd1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + pbb3 { + nvidia,pins = "pbb3", + "pbb5", + "pbb6", + "pbb7"; + nvidia,function = "rsvd4"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + pcc1 { + nvidia,pins = "pcc1", + "pcc2"; + nvidia,function = "rsvd4"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + gmi_ad0_pg0 { + nvidia,pins = "gmi_ad0_pg0", + "gmi_ad1_pg1"; + nvidia,function = "gmi"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + gmi_ad10_ph2 { + nvidia,pins = "gmi_ad10_ph2", + "gmi_ad11_ph3", + "gmi_ad13_ph5", + "gmi_ad8_ph0", + "gmi_clk_pk1"; + nvidia,function = "gmi"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + gmi_ad2_pg2 { + nvidia,pins = "gmi_ad2_pg2", + "gmi_ad3_pg3"; + nvidia,function = "gmi"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + gmi_adv_n_pk0 { + nvidia,pins = "gmi_adv_n_pk0", + "gmi_cs0_n_pj0", + "gmi_cs2_n_pk3", + "gmi_cs4_n_pk2", + "gmi_cs7_n_pi6", + "gmi_dqs_p_pj3", + "gmi_iordy_pi5", + "gmi_wp_n_pc7"; + nvidia,function = "gmi"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + gmi_cs3_n_pk4 { + nvidia,pins = "gmi_cs3_n_pk4"; + nvidia,function = "gmi"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + clk2_req_pcc5 { + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "rsvd4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + kb_col3_pq3 { + nvidia,pins = "kb_col3_pq3", + "kb_col6_pq6", + "kb_col7_pq7"; + nvidia,function = "kbc"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + kb_col5_pq5 { + nvidia,pins = "kb_col5_pq5"; + nvidia,function = "kbc"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + kb_row3_pr3 { + nvidia,pins = "kb_row3_pr3", + "kb_row4_pr4", + "kb_row6_pr6", + "kb_row8_ps0"; + nvidia,function = "kbc"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + clk3_req_pee1 { + nvidia,pins = "clk3_req_pee1"; + nvidia,function = "rsvd4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + pu4 { + nvidia,pins = "pu4"; + nvidia,function = "displayb"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + pu5 { + nvidia,pins = "pu5", + "pu6"; + nvidia,function = "displayb"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + hdmi_int_pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "rsvd1"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + clk1_req_pee2 { + nvidia,pins = "clk1_req_pee2", + "usb_vbus_en1_pn5"; + nvidia,function = "rsvd4"; + nvidia,pull = <1>; + nvidia,tristate = <1>; + nvidia,enable-input = <0>; + }; + + drive_sdio1 { + nvidia,pins = "drive_sdio1"; + nvidia,high-speed-mode = <1>; + nvidia,schmitt = <0>; + nvidia,low-power-mode = <3>; + nvidia,pull-down-strength = <36>; + nvidia,pull-up-strength = <20>; + nvidia,slew-rate-rising = <2>; + nvidia,slew-rate-falling = <2>; + }; + drive_sdio3 { + nvidia,pins = "drive_sdio3"; + nvidia,high-speed-mode = <1>; + nvidia,schmitt = <0>; + nvidia,low-power-mode = <3>; + nvidia,pull-down-strength = <22>; + nvidia,pull-up-strength = <36>; + nvidia,slew-rate-rising = <0>; + nvidia,slew-rate-falling = <0>; + }; + drive_gma { + nvidia,pins = "drive_gma"; + nvidia,high-speed-mode = <1>; + nvidia,schmitt = <0>; + nvidia,low-power-mode = <3>; + nvidia,pull-down-strength = <2>; + nvidia,pull-up-strength = <1>; + nvidia,slew-rate-rising = <0>; + nvidia,slew-rate-falling = <0>; + nvidia,drive-type = <1>; + }; + }; + }; + serial@70006300 { status = "okay"; - clock-frequency = <408000000>; + }; + + i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + + battery: smart-battery { + compatible = "ti,bq20z45", "sbs,sbs-battery"; + reg = <0xb>; + battery-name = "battery"; + sbs,i2c-retry-count = <2>; + sbs,poll-retry-count = <100>; + }; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + tps51632 { + compatible = "ti,tps51632"; + reg = <0x43>; + regulator-name = "vdd-cpu"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1520000>; + regulator-boot-on; + regulator-always-on; + }; + + tps65090 { + compatible = "ti,tps65090"; + reg = <0x48>; + interrupt-parent = <&gpio>; + interrupts = <72 0x04>; /* gpio PJ0 */ + + vsys1-supply = <&vdd_ac_bat_reg>; + vsys2-supply = <&vdd_ac_bat_reg>; + vsys3-supply = <&vdd_ac_bat_reg>; + infet1-supply = <&vdd_ac_bat_reg>; + infet2-supply = <&vdd_ac_bat_reg>; + infet3-supply = <&tps65090_dcdc2_reg>; + infet4-supply = <&tps65090_dcdc2_reg>; + infet5-supply = <&tps65090_dcdc2_reg>; + infet6-supply = <&tps65090_dcdc2_reg>; + infet7-supply = <&tps65090_dcdc2_reg>; + vsys-l1-supply = <&vdd_ac_bat_reg>; + vsys-l2-supply = <&vdd_ac_bat_reg>; + + regulators { + tps65090_dcdc1_reg: dcdc1 { + regulator-name = "vdd-sys-5v0"; + regulator-always-on; + regulator-boot-on; + }; + + tps65090_dcdc2_reg: dcdc2 { + regulator-name = "vdd-sys-3v3"; + regulator-always-on; + regulator-boot-on; + }; + + dcdc3 { + regulator-name = "vdd-ao"; + regulator-always-on; + regulator-boot-on; + }; + + fet1 { + regulator-name = "vdd-lcd-bl"; + }; + + fet3 { + regulator-name = "vdd-modem-3v3"; + }; + + fet4 { + regulator-name = "avdd-lcd"; + }; + + fet5 { + regulator-name = "vdd-lvds"; + }; + + fet6 { + regulator-name = "vdd-sd-slot"; + regulator-always-on; + regulator-boot-on; + }; + + fet7 { + regulator-name = "vdd-com-3v3"; + }; + + ldo1 { + regulator-name = "vdd-sby-5v0"; + regulator-always-on; + regulator-boot-on; + }; + + ldo2 { + regulator-name = "vdd-sby-3v3"; + regulator-always-on; + regulator-boot-on; + }; + }; + }; }; pmc { nvidia,invert-interrupt; }; + + sdhci@78000400 { + cd-gpios = <&gpio 170 1>; /* gpio PV2 */ + bus-width = <4>; + status = "okay"; + }; + + sdhci@78000600 { + bus-width = <8>; + status = "okay"; + non-removable; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_ac_bat_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd_ac_bat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + dvdd_ts_reg: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "dvdd_ts"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + gpio = <&gpio 61 0>; /* GPIO PH5 */ + }; + + lcd_bl_en_reg: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "lcd_bl_en"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 58 0>; /* GPIO PH2 */ + }; + + usb1_vbus_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 108 0>; /* GPIO PN4 */ + gpio-open-drain; + vin-supply = <&tps65090_dcdc1_reg>; + }; + + usb3_vbus_reg: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "usb2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 86 0>; /* GPIO PK6 */ + gpio-open-drain; + vin-supply = <&tps65090_dcdc1_reg>; + }; + + vdd_hdmi_reg: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "vdd_hdmi_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 81 0>; /* GPIO PK1 */ + vin-supply = <&tps65090_dcdc1_reg>; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra114-pluto.dts b/arch/arm/boot/dts/tegra114-pluto.dts index 9bea8f5..6bbc8ef 100644 --- a/arch/arm/boot/dts/tegra114-pluto.dts +++ b/arch/arm/boot/dts/tegra114-pluto.dts @@ -12,10 +12,22 @@ serial@70006300 { status = "okay"; - clock-frequency = <408000000>; }; pmc { nvidia,invert-interrupt; }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 1dfaf28..629415f 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -4,6 +4,13 @@ compatible = "nvidia,tegra114"; interrupt-parent = <&gic>; + aliases { + serial0 = &uarta; + serial1 = &uartb; + serial2 = &uartc; + serial3 = &uartd; + }; + gic: interrupt-controller { compatible = "arm,cortex-a15-gic"; #interrupt-cells = <3>; @@ -24,14 +31,53 @@ 0 42 0x04 0 121 0x04 0 122 0x04>; + clocks = <&tegra_car 5>; }; tegra_car: clock { - compatible = "nvidia,tegra114-car, nvidia,tegra30-car"; + compatible = "nvidia,tegra114-car"; reg = <0x60006000 0x1000>; #clock-cells = <1>; }; + apbdma: dma { + compatible = "nvidia,tegra114-apbdma"; + reg = <0x6000a000 0x1400>; + interrupts = <0 104 0x04 + 0 105 0x04 + 0 106 0x04 + 0 107 0x04 + 0 108 0x04 + 0 109 0x04 + 0 110 0x04 + 0 111 0x04 + 0 112 0x04 + 0 113 0x04 + 0 114 0x04 + 0 115 0x04 + 0 116 0x04 + 0 117 0x04 + 0 118 0x04 + 0 119 0x04 + 0 128 0x04 + 0 129 0x04 + 0 130 0x04 + 0 131 0x04 + 0 132 0x04 + 0 133 0x04 + 0 134 0x04 + 0 135 0x04 + 0 136 0x04 + 0 137 0x04 + 0 138 0x04 + 0 139 0x04 + 0 140 0x04 + 0 141 0x04 + 0 142 0x04 + 0 143 0x04>; + clocks = <&tegra_car 34>; + }; + ahb: ahb { compatible = "nvidia,tegra114-ahb", "nvidia,tegra30-ahb"; reg = <0x6000c004 0x14c>; @@ -60,35 +106,186 @@ 0x70003000 0x40c>; /* Mux registers */ }; - serial@70006000 { + /* + * There are two serial driver i.e. 8250 based simple serial + * driver and APB DMA based serial driver for higher baudrate + * and performace. To enable the 8250 based driver, the compatible + * is "nvidia,tegra114-uart", "nvidia,tegra20-uart" and to enable + * the APB DMA based serial driver, the comptible is + * "nvidia,tegra114-hsuart", "nvidia,tegra30-hsuart". + */ + uarta: serial@70006000 { compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart"; reg = <0x70006000 0x40>; reg-shift = <2>; interrupts = <0 36 0x04>; + nvidia,dma-request-selector = <&apbdma 8>; status = "disabled"; + clocks = <&tegra_car 6>; }; - serial@70006040 { + uartb: serial@70006040 { compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart"; reg = <0x70006040 0x40>; reg-shift = <2>; interrupts = <0 37 0x04>; + nvidia,dma-request-selector = <&apbdma 9>; status = "disabled"; + clocks = <&tegra_car 192>; }; - serial@70006200 { + uartc: serial@70006200 { compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart"; reg = <0x70006200 0x100>; reg-shift = <2>; interrupts = <0 46 0x04>; + nvidia,dma-request-selector = <&apbdma 10>; status = "disabled"; + clocks = <&tegra_car 55>; }; - serial@70006300 { + uartd: serial@70006300 { compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart"; reg = <0x70006300 0x100>; reg-shift = <2>; interrupts = <0 90 0x04>; + nvidia,dma-request-selector = <&apbdma 19>; + status = "disabled"; + clocks = <&tegra_car 65>; + }; + + pwm: pwm { + compatible = "nvidia,tegra114-pwm", "nvidia,tegra20-pwm"; + reg = <0x7000a000 0x100>; + #pwm-cells = <2>; + clocks = <&tegra_car 17>; + status = "disabled"; + }; + + i2c@7000c000 { + compatible = "nvidia,tegra114-i2c"; + reg = <0x7000c000 0x100>; + interrupts = <0 38 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 12>; + clock-names = "div-clk"; + status = "disabled"; + }; + + i2c@7000c400 { + compatible = "nvidia,tegra114-i2c"; + reg = <0x7000c400 0x100>; + interrupts = <0 84 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 54>; + clock-names = "div-clk"; + status = "disabled"; + }; + + i2c@7000c500 { + compatible = "nvidia,tegra114-i2c"; + reg = <0x7000c500 0x100>; + interrupts = <0 92 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 67>; + clock-names = "div-clk"; + status = "disabled"; + }; + + i2c@7000c700 { + compatible = "nvidia,tegra114-i2c"; + reg = <0x7000c700 0x100>; + interrupts = <0 120 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 103>; + clock-names = "div-clk"; + status = "disabled"; + }; + + i2c@7000d000 { + compatible = "nvidia,tegra114-i2c"; + reg = <0x7000d000 0x100>; + interrupts = <0 53 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 47>; + clock-names = "div-clk"; + status = "disabled"; + }; + + spi@7000d400 { + compatible = "nvidia,tegra114-spi"; + reg = <0x7000d400 0x200>; + interrupts = <0 59 0x04>; + nvidia,dma-request-selector = <&apbdma 15>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 41>; + clock-names = "spi"; + status = "disabled"; + }; + + spi@7000d600 { + compatible = "nvidia,tegra114-spi"; + reg = <0x7000d600 0x200>; + interrupts = <0 82 0x04>; + nvidia,dma-request-selector = <&apbdma 16>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 44>; + clock-names = "spi"; + status = "disabled"; + }; + + spi@7000d800 { + compatible = "nvidia,tegra114-spi"; + reg = <0x7000d800 0x200>; + interrupts = <0 83 0x04>; + nvidia,dma-request-selector = <&apbdma 17>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 46>; + clock-names = "spi"; + status = "disabled"; + }; + + spi@7000da00 { + compatible = "nvidia,tegra114-spi"; + reg = <0x7000da00 0x200>; + interrupts = <0 93 0x04>; + nvidia,dma-request-selector = <&apbdma 18>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 68>; + clock-names = "spi"; + status = "disabled"; + }; + + spi@7000dc00 { + compatible = "nvidia,tegra114-spi"; + reg = <0x7000dc00 0x200>; + interrupts = <0 94 0x04>; + nvidia,dma-request-selector = <&apbdma 27>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 104>; + clock-names = "spi"; + status = "disabled"; + }; + + spi@7000de00 { + compatible = "nvidia,tegra114-spi"; + reg = <0x7000de00 0x200>; + interrupts = <0 79 0x04>; + nvidia,dma-request-selector = <&apbdma 28>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 105>; + clock-names = "spi"; status = "disabled"; }; @@ -96,11 +293,22 @@ compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; interrupts = <0 2 0x04>; + clocks = <&tegra_car 4>; + }; + + kbc { + compatible = "nvidia,tegra114-kbc"; + reg = <0x7000e200 0x100>; + interrupts = <0 85 0x04>; + clocks = <&tegra_car 36>; + status = "disabled"; }; pmc { - compatible = "nvidia,tegra114-pmc", "nvidia,tegra30-pmc"; + compatible = "nvidia,tegra114-pmc"; reg = <0x7000e400 0x400>; + clocks = <&tegra_car 261>, <&clk32k_in>; + clock-names = "pclk", "clk32k_in"; }; iommu { @@ -114,6 +322,38 @@ nvidia,ahb = <&ahb>; }; + sdhci@78000000 { + compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; + reg = <0x78000000 0x200>; + interrupts = <0 14 0x04>; + clocks = <&tegra_car 14>; + status = "disable"; + }; + + sdhci@78000200 { + compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; + reg = <0x78000200 0x200>; + interrupts = <0 15 0x04>; + clocks = <&tegra_car 9>; + status = "disable"; + }; + + sdhci@78000400 { + compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; + reg = <0x78000400 0x200>; + interrupts = <0 19 0x04>; + clocks = <&tegra_car 69>; + status = "disable"; + }; + + sdhci@78000600 { + compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; + reg = <0x78000600 0x200>; + interrupts = <0 31 0x04>; + clocks = <&tegra_car 15>; + status = "disable"; + }; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi index 4441620..a573b94 100644 --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi @@ -361,6 +361,15 @@ }; }; + pmc { + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <5000>; + nvidia,cpu-pwr-off-time = <5000>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <3875>; + nvidia,sys-clock-req-active-high; + }; + memory-controller@7000f400 { emc-table@83250 { reg = <83250>; @@ -444,7 +453,20 @@ }; sdhci@c8000600 { - cd-gpios = <&gpio 23 0>; /* gpio PC7 */ + cd-gpios = <&gpio 23 1>; /* gpio PC7 */ + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; sound { @@ -460,6 +482,9 @@ "Mic", "MIC1"; nvidia,ac97-controller = <&ac97>; + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; regulators { diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index 61d027f..e7d5de4 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -416,6 +416,12 @@ pmc { nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <5000>; + nvidia,cpu-pwr-off-time = <5000>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <3875>; + nvidia,sys-clock-req-active-high; }; usb@c5000000 { @@ -437,7 +443,7 @@ sdhci@c8000200 { status = "okay"; - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 155 0>; /* gpio PT3 */ bus-width = <4>; @@ -445,12 +451,36 @@ sdhci@c8000600 { status = "okay"; - cd-gpios = <&gpio 58 0>; /* gpio PH2 */ + cd-gpios = <&gpio 58 1>; /* gpio PH2 */ wp-gpios = <&gpio 59 0>; /* gpio PH3 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ bus-width = <8>; }; + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio 170 1>; /* gpio PV2, active low */ + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + }; + kbc { status = "okay"; nvidia,debounce-delay-ms = <2>; @@ -656,5 +686,8 @@ nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */ nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */ + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts index a2d6d65..ace2343 100644 --- a/arch/arm/boot/dts/tegra20-medcom-wide.dts +++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts @@ -6,6 +6,10 @@ model = "Avionic Design Medcom-Wide board"; compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20"; + pwm { + status = "okay"; + }; + i2c@7000c000 { wm8903: wm8903@1a { compatible = "wlf,wm8903"; @@ -54,5 +58,8 @@ nvidia,spkr-en-gpios = <&wm8903 2 0>; nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index 54d6fce..e3e0c99 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -415,6 +415,12 @@ pmc { nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <0>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <0>; + nvidia,sys-clock-req-active-high; }; usb@c5000000 { @@ -436,7 +442,7 @@ sdhci@c8000000 { status = "okay"; - cd-gpios = <&gpio 173 0>; /* gpio PV5 */ + cd-gpios = <&gpio 173 1>; /* gpio PV5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 169 0>; /* gpio PV1 */ bus-width = <4>; @@ -445,6 +451,20 @@ sdhci@c8000600 { status = "okay"; bus-width = <8>; + non-removable; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; gpio-keys { @@ -501,5 +521,8 @@ nvidia,audio-codec = <&alc5632>; nvidia,i2s-controller = <&tegra_i2s1>; nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts index 2894800..1a17cc3 100644 --- a/arch/arm/boot/dts/tegra20-plutux.dts +++ b/arch/arm/boot/dts/tegra20-plutux.dts @@ -52,5 +52,8 @@ nvidia,spkr-en-gpios = <&wm8903 2 0>; nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 37b3a57..cee4c34 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -517,6 +517,12 @@ pmc { nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <5000>; + nvidia,cpu-pwr-off-time = <5000>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <3875>; + nvidia,sys-clock-req-active-high; }; memory-controller@7000f400 { @@ -580,11 +586,12 @@ status = "okay"; power-gpios = <&gpio 86 0>; /* gpio PK6 */ bus-width = <4>; + keep-power-in-suspend; }; sdhci@c8000400 { status = "okay"; - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ bus-width = <4>; @@ -593,6 +600,20 @@ sdhci@c8000600 { status = "okay"; bus-width = <8>; + non-removable; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; gpio-keys { @@ -808,5 +829,8 @@ nvidia,spkr-en-gpios = <&wm8903 2 0>; nvidia,hp-det-gpios = <&gpio 185 0>; /* gpio PX1 */ + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index 4766aba..50b3ec1 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -458,6 +458,12 @@ pmc { nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <5000>; + nvidia,cpu-pwr-off-time = <5000>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <3875>; + nvidia,sys-clock-req-active-high; }; usb@c5008000 { @@ -465,12 +471,25 @@ }; sdhci@c8000600 { - cd-gpios = <&gpio 58 0>; /* gpio PH2 */ + cd-gpios = <&gpio 58 1>; /* gpio PH2 */ wp-gpios = <&gpio 59 0>; /* gpio PH3 */ bus-width = <4>; status = "okay"; }; + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + regulators { compatible = "simple-bus"; diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts index 402b210..742f0b3 100644 --- a/arch/arm/boot/dts/tegra20-tec.dts +++ b/arch/arm/boot/dts/tegra20-tec.dts @@ -52,5 +52,8 @@ nvidia,spkr-en-gpios = <&wm8903 2 0>; nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 5d79e4f..9cc78a1 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -300,6 +300,15 @@ }; }; + pmc { + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <5000>; + nvidia,cpu-pwr-off-time = <5000>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <3875>; + nvidia,sys-clock-req-active-high; + }; + usb@c5000000 { status = "okay"; nvidia,vbus-gpio = <&gpio 170 0>; /* gpio PV2 */ @@ -325,11 +334,35 @@ sdhci@c8000600 { status = "okay"; - cd-gpios = <&gpio 121 0>; /* gpio PP1 */ + cd-gpios = <&gpio 121 1>; /* gpio PP1 */ wp-gpios = <&gpio 122 0>; /* gpio PP2 */ bus-width = <4>; }; + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio 190 1>; /* gpio PX6, active low */ + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + }; + poweroff { compatible = "gpio-poweroff"; gpios = <&gpio 191 1>; /* gpio PX7, active low */ @@ -363,5 +396,8 @@ compatible = "nvidia,tegra-audio-trimslice"; nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&codec>; + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index 425c890..dd38f1f 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -493,6 +493,12 @@ pmc { nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <100>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <458>; + nvidia,sys-clock-req-active-high; }; usb@c5000000 { @@ -516,11 +522,12 @@ status = "okay"; power-gpios = <&gpio 86 0>; /* gpio PK6 */ bus-width = <4>; + keep-power-in-suspend; }; sdhci@c8000400 { status = "okay"; - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ bus-width = <4>; @@ -529,6 +536,31 @@ sdhci@c8000600 { status = "okay"; bus-width = <8>; + non-removable; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio 170 1>; /* gpio PV2, active low */ + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; }; regulators { @@ -607,5 +639,8 @@ nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ nvidia,int-mic-en-gpios = <&gpio 184 0>; /* gpio PX0 */ nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */ + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index ea57c0f..d2567f8 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -496,6 +496,14 @@ pmc { nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <1000>; + nvidia,core-pwr-good-time = <0 3845>; + nvidia,core-pwr-off-time = <93727>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + nvidia,combined-power-req; }; usb@c5000000 { @@ -510,6 +518,7 @@ sdhci@c8000400 { status = "okay"; + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 173 0>; /* gpio PV5 */ bus-width = <8>; }; @@ -517,6 +526,20 @@ sdhci@c8000600 { status = "okay"; bus-width = <8>; + non-removable; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; kbc { @@ -525,6 +548,7 @@ nvidia,repeat-delay-ms = <160>; nvidia,kbc-row-pins = <0 1 2>; nvidia,kbc-col-pins = <16 17>; + nvidia,wakeup-source; linux,keymap = <0x00000074 /* KEY_POWER */ 0x01000066 /* KEY_HOME */ 0x0101009E /* KEY_BACK */ @@ -559,5 +583,8 @@ nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&codec>; + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 48d00a0..56a9110 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -145,6 +145,7 @@ 0 1 0x04 0 41 0x04 0 42 0x04>; + clocks = <&tegra_car 5>; }; tegra_car: clock { @@ -208,7 +209,7 @@ compatible = "nvidia,tegra20-das"; reg = <0x70000c00 0x80>; }; - + tegra_ac97: ac97 { compatible = "nvidia,tegra20-ac97"; reg = <0x70002000 0x200>; @@ -298,12 +299,14 @@ reg = <0x7000a000 0x100>; #pwm-cells = <2>; clocks = <&tegra_car 17>; + status = "disabled"; }; rtc { compatible = "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; interrupts = <0 2 0x04>; + clocks = <&tegra_car 4>; }; i2c@7000c000 { @@ -385,7 +388,7 @@ spi@7000d800 { compatible = "nvidia,tegra20-slink"; - reg = <0x7000d480 0x200>; + reg = <0x7000d800 0x200>; interrupts = <0 83 0x04>; nvidia,dma-request-selector = <&apbdma 17>; #address-cells = <1>; @@ -416,6 +419,8 @@ pmc { compatible = "nvidia,tegra20-pmc"; reg = <0x7000e400 0x400>; + clocks = <&tegra_car 110>, <&clk32k_in>; + clock-names = "pclk", "clk32k_in"; }; memory-controller@7000f000 { @@ -438,31 +443,6 @@ #size-cells = <0>; }; - phy1: usb-phy@c5000400 { - compatible = "nvidia,tegra20-usb-phy"; - reg = <0xc5000400 0x3c00>; - phy_type = "utmi"; - nvidia,has-legacy-mode; - clocks = <&tegra_car 22>, <&tegra_car 127>; - clock-names = "phy", "pll_u"; - }; - - phy2: usb-phy@c5004400 { - compatible = "nvidia,tegra20-usb-phy"; - reg = <0xc5004400 0x3c00>; - phy_type = "ulpi"; - clocks = <&tegra_car 94>, <&tegra_car 127>; - clock-names = "phy", "pll_u"; - }; - - phy3: usb-phy@c5008400 { - compatible = "nvidia,tegra20-usb-phy"; - reg = <0xc5008400 0x3C00>; - phy_type = "utmi"; - clocks = <&tegra_car 22>, <&tegra_car 127>; - clock-names = "phy", "pll_u"; - }; - usb@c5000000 { compatible = "nvidia,tegra20-ehci", "usb-ehci"; reg = <0xc5000000 0x4000>; @@ -475,6 +455,15 @@ status = "disabled"; }; + phy1: usb-phy@c5000400 { + compatible = "nvidia,tegra20-usb-phy"; + reg = <0xc5000400 0x3c00>; + phy_type = "utmi"; + nvidia,has-legacy-mode; + clocks = <&tegra_car 22>, <&tegra_car 127>; + clock-names = "phy", "pll_u"; + }; + usb@c5004000 { compatible = "nvidia,tegra20-ehci", "usb-ehci"; reg = <0xc5004000 0x4000>; @@ -485,6 +474,14 @@ status = "disabled"; }; + phy2: usb-phy@c5004400 { + compatible = "nvidia,tegra20-usb-phy"; + reg = <0xc5004400 0x3c00>; + phy_type = "ulpi"; + clocks = <&tegra_car 93>, <&tegra_car 127>; + clock-names = "phy", "pll_u"; + }; + usb@c5008000 { compatible = "nvidia,tegra20-ehci", "usb-ehci"; reg = <0xc5008000 0x4000>; @@ -495,6 +492,14 @@ status = "disabled"; }; + phy3: usb-phy@c5008400 { + compatible = "nvidia,tegra20-usb-phy"; + reg = <0xc5008400 0x3c00>; + phy_type = "utmi"; + clocks = <&tegra_car 22>, <&tegra_car 127>; + clock-names = "phy", "pll_u"; + }; + sdhci@c8000000 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000000 0x200>; diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index 8ff2ff2..b732f7c 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -253,11 +253,18 @@ pmc { status = "okay"; nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <200>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <0>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; }; sdhci@78000000 { status = "okay"; - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 155 0>; /* gpio PT3 */ power-gpios = <&gpio 31 0>; /* gpio PD7 */ bus-width = <4>; @@ -266,6 +273,20 @@ sdhci@78000600 { status = "okay"; bus-width = <8>; + non-removable; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; regulators { diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts index adc88aa..e392bd2 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a02.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts @@ -88,6 +88,7 @@ status = "okay"; power-gpios = <&gpio 28 0>; /* gpio PD4 */ bus-width = <4>; + keep-power-in-suspend; }; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts index 08163e1..d0db6c7 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts @@ -100,5 +100,6 @@ status = "okay"; power-gpios = <&gpio 27 0>; /* gpio PD3 */ bus-width = <4>; + keep-power-in-suspend; }; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 1749927..01b4c26 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -307,11 +307,18 @@ pmc { status = "okay"; nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <200>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <0>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; }; sdhci@78000000 { status = "okay"; - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 155 0>; /* gpio PT3 */ power-gpios = <&gpio 31 0>; /* gpio PD7 */ bus-width = <4>; @@ -320,6 +327,20 @@ sdhci@78000600 { status = "okay"; bus-width = <8>; + non-removable; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; regulators { @@ -496,5 +517,8 @@ nvidia,spkr-en-gpios = <&wm8903 2 0>; nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + + clocks = <&tegra_car 184>, <&tegra_car 185>, <&tegra_car 120>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 9d87a3f..15ded60 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -148,6 +148,7 @@ 0 42 0x04 0 121 0x04 0 122 0x04>; + clocks = <&tegra_car 5>; }; tegra_car: clock { @@ -285,12 +286,14 @@ reg = <0x7000a000 0x100>; #pwm-cells = <2>; clocks = <&tegra_car 17>; + status = "disabled"; }; rtc { compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; interrupts = <0 2 0x04>; + clocks = <&tegra_car 4>; }; i2c@7000c000 { @@ -372,7 +375,7 @@ spi@7000d800 { compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; - reg = <0x7000d480 0x200>; + reg = <0x7000d800 0x200>; interrupts = <0 83 0x04>; nvidia,dma-request-selector = <&apbdma 17>; #address-cells = <1>; @@ -423,8 +426,10 @@ }; pmc { - compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc"; + compatible = "nvidia,tegra30-pmc"; reg = <0x7000e400 0x400>; + clocks = <&tegra_car 218>, <&clk32k_in>; + clock-names = "pclk", "clk32k_in"; }; memory-controller { diff --git a/arch/arm/include/asm/smp_twd.h b/arch/arm/include/asm/smp_twd.h index 0f01f46..7b2899c 100644 --- a/arch/arm/include/asm/smp_twd.h +++ b/arch/arm/include/asm/smp_twd.h @@ -34,12 +34,4 @@ struct twd_local_timer name __initdata = { \ int twd_local_timer_register(struct twd_local_timer *); -#ifdef CONFIG_HAVE_ARM_TWD -void twd_local_timer_of_register(void); -#else -static inline void twd_local_timer_of_register(void) -{ -} -#endif - #endif diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 31644f1..79078ed 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -480,7 +480,7 @@ static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt) evt->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_DUMMY; - evt->rating = 400; + evt->rating = 100; evt->mult = 1; evt->set_mode = broadcast_timer_set_mode; diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 3f25650..90525d9 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -362,25 +362,13 @@ int __init twd_local_timer_register(struct twd_local_timer *tlt) } #ifdef CONFIG_OF -const static struct of_device_id twd_of_match[] __initconst = { - { .compatible = "arm,cortex-a9-twd-timer", }, - { .compatible = "arm,cortex-a5-twd-timer", }, - { .compatible = "arm,arm11mp-twd-timer", }, - { }, -}; - -void __init twd_local_timer_of_register(void) +static void __init twd_local_timer_of_register(struct device_node *np) { - struct device_node *np; int err; if (!is_smp() || !setup_max_cpus) return; - np = of_find_matching_node(NULL, twd_of_match); - if (!np) - return; - twd_ppi = irq_of_parse_and_map(np, 0); if (!twd_ppi) { err = -EINVAL; @@ -398,4 +386,7 @@ void __init twd_local_timer_of_register(void) out: WARN(err, "twd_local_timer_of_register failed (%d)\n", err); } +CLOCKSOURCE_OF_DECLARE(arm_twd_a9, "arm,cortex-a9-twd-timer", twd_local_timer_of_register); +CLOCKSOURCE_OF_DECLARE(arm_twd_a5, "arm,cortex-a5-twd-timer", twd_local_timer_of_register); +CLOCKSOURCE_OF_DECLARE(arm_twd_11mp, "arm,arm11mp-twd-timer", twd_local_timer_of_register); #endif diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S index d912e73..94b0650 100644 --- a/arch/arm/lib/memset.S +++ b/arch/arm/lib/memset.S @@ -14,31 +14,15 @@ .text .align 5 - .word 0 - -1: subs r2, r2, #4 @ 1 do we have enough - blt 5f @ 1 bytes to align with? - cmp r3, #2 @ 1 - strltb r1, [ip], #1 @ 1 - strleb r1, [ip], #1 @ 1 - strb r1, [ip], #1 @ 1 - add r2, r2, r3 @ 1 (r2 = r2 - (4 - r3)) -/* - * The pointer is now aligned and the length is adjusted. Try doing the - * memset again. - */ ENTRY(memset) -/* - * Preserve the contents of r0 for the return value. - */ - mov ip, r0 - ands r3, ip, #3 @ 1 unaligned? - bne 1b @ 1 + ands r3, r0, #3 @ 1 unaligned? + mov ip, r0 @ preserve r0 as return value + bne 6f @ 1 /* * we know that the pointer in ip is aligned to a word boundary. */ - orr r1, r1, r1, lsl #8 +1: orr r1, r1, r1, lsl #8 orr r1, r1, r1, lsl #16 mov r3, r1 cmp r2, #16 @@ -127,4 +111,13 @@ ENTRY(memset) tst r2, #1 strneb r1, [ip], #1 mov pc, lr + +6: subs r2, r2, #4 @ 1 do we have enough + blt 5b @ 1 bytes to align with? + cmp r3, #2 @ 1 + strltb r1, [ip], #1 @ 1 + strleb r1, [ip], #1 @ 1 + strb r1, [ip], #1 @ 1 + add r2, r2, r3 @ 1 (r2 = r2 - (4 - r3)) + b 1b ENDPROC(memset) diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h index eed465a..5fc2377 100644 --- a/arch/arm/mach-at91/include/mach/gpio.h +++ b/arch/arm/mach-at91/include/mach/gpio.h @@ -209,6 +209,14 @@ extern int at91_get_gpio_value(unsigned pin); extern void at91_gpio_suspend(void); extern void at91_gpio_resume(void); +#ifdef CONFIG_PINCTRL_AT91 +extern void at91_pinctrl_gpio_suspend(void); +extern void at91_pinctrl_gpio_resume(void); +#else +static inline void at91_pinctrl_gpio_suspend(void) {} +static inline void at91_pinctrl_gpio_resume(void) {} +#endif + #endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index 8e21026..e0ca591 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -92,23 +92,21 @@ static int at91_aic_set_wake(struct irq_data *d, unsigned value) void at91_irq_suspend(void) { - int i = 0, bit; + int bit = -1; if (has_aic5()) { /* disable enabled irqs */ - while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) { + while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) { at91_aic_write(AT91_AIC5_SSR, bit & AT91_AIC5_INTSEL_MSK); at91_aic_write(AT91_AIC5_IDCR, 1); - i = bit; } /* enable wakeup irqs */ - i = 0; - while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) { + bit = -1; + while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) { at91_aic_write(AT91_AIC5_SSR, bit & AT91_AIC5_INTSEL_MSK); at91_aic_write(AT91_AIC5_IECR, 1); - i = bit; } } else { at91_aic_write(AT91_AIC_IDCR, *backups); @@ -118,23 +116,21 @@ void at91_irq_suspend(void) void at91_irq_resume(void) { - int i = 0, bit; + int bit = -1; if (has_aic5()) { /* disable wakeup irqs */ - while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) { + while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) { at91_aic_write(AT91_AIC5_SSR, bit & AT91_AIC5_INTSEL_MSK); at91_aic_write(AT91_AIC5_IDCR, 1); - i = bit; } /* enable irqs disabled for suspend */ - i = 0; - while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) { + bit = -1; + while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) { at91_aic_write(AT91_AIC5_SSR, bit & AT91_AIC5_INTSEL_MSK); at91_aic_write(AT91_AIC5_IECR, 1); - i = bit; } } else { at91_aic_write(AT91_AIC_IDCR, *wakeups); diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index adb6db8..73f1f25 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -201,7 +201,10 @@ extern u32 at91_slow_clock_sz; static int at91_pm_enter(suspend_state_t state) { - at91_gpio_suspend(); + if (of_have_populated_dt()) + at91_pinctrl_gpio_suspend(); + else + at91_gpio_suspend(); at91_irq_suspend(); pr_debug("AT91: PM - wake mask %08x, pm state %d\n", @@ -286,7 +289,10 @@ static int at91_pm_enter(suspend_state_t state) error: target_state = PM_SUSPEND_ON; at91_irq_resume(); - at91_gpio_resume(); + if (of_have_populated_dt()) + at91_pinctrl_gpio_resume(); + else + at91_gpio_resume(); return 0; } diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c index a685e97..45b7c71 100644 --- a/arch/arm/mach-davinci/dma.c +++ b/arch/arm/mach-davinci/dma.c @@ -743,6 +743,9 @@ EXPORT_SYMBOL(edma_free_channel); */ int edma_alloc_slot(unsigned ctlr, int slot) { + if (!edma_cc[ctlr]) + return -EINVAL; + if (slot >= 0) slot = EDMA_CHAN_SLOT(slot); diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig index abda5a1..0f2111a 100644 --- a/arch/arm/mach-footbridge/Kconfig +++ b/arch/arm/mach-footbridge/Kconfig @@ -67,6 +67,7 @@ config ARCH_NETWINDER select ISA select ISA_DMA select PCI + select VIRT_TO_BUS help Say Y here if you intend to run this kernel on the Rebel.COM NetWinder. Information about this machine can be found at: diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index a4f9f50..76c1170 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -32,7 +32,6 @@ #include <asm/cacheflush.h> #include <asm/cputype.h> #include <asm/smp_plat.h> -#include <asm/smp_twd.h> #include <asm/hardware/arm_timer.h> #include <asm/hardware/timer-sp.h> #include <asm/hardware/cache-l2x0.h> @@ -119,10 +118,10 @@ static void __init highbank_timer_init(void) sp804_clocksource_and_sched_clock_init(timer_base + 0x20, "timer1"); sp804_clockevents_init(timer_base, irq, "timer0"); - twd_local_timer_of_register(); - arch_timer_of_register(); arch_timer_sched_clock_init(); + + clocksource_of_init(); } static void highbank_power_off(void) diff --git a/arch/arm/mach-imx/clk-busy.c b/arch/arm/mach-imx/clk-busy.c index 1ab91b5..85b728c 100644 --- a/arch/arm/mach-imx/clk-busy.c +++ b/arch/arm/mach-imx/clk-busy.c @@ -169,7 +169,7 @@ struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift, busy->mux.reg = reg; busy->mux.shift = shift; - busy->mux.width = width; + busy->mux.mask = BIT(width) - 1; busy->mux.lock = &imx_ccm_lock; busy->mux_ops = &clk_mux_ops; diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index 74e3a34..e13a8fa 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -264,6 +264,7 @@ int __init mx35_clocks_init(void) clk_prepare_enable(clk[gpio3_gate]); clk_prepare_enable(clk[iim_gate]); clk_prepare_enable(clk[emi_gate]); + clk_prepare_enable(clk[max_gate]); /* * SCC is needed to boot via mmc after a watchdog reset. The clock code diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/imx25-dt.c index 03b65e5..8234839 100644 --- a/arch/arm/mach-imx/imx25-dt.c +++ b/arch/arm/mach-imx/imx25-dt.c @@ -27,6 +27,11 @@ static const char * const imx25_dt_board_compat[] __initconst = { NULL }; +static void __init imx25_timer_init(void) +{ + mx25_clocks_init_dt(); +} + DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)") .map_io = mx25_map_io, .init_early = imx25_init_early, diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 9ffd103..b59ddcb 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -12,6 +12,7 @@ #include <linux/clk.h> #include <linux/clkdev.h> +#include <linux/clocksource.h> #include <linux/cpu.h> #include <linux/delay.h> #include <linux/export.h> @@ -28,11 +29,9 @@ #include <linux/regmap.h> #include <linux/micrel_phy.h> #include <linux/mfd/syscon.h> -#include <asm/smp_twd.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/mach/time.h> #include <asm/system_misc.h> #include "common.h" @@ -292,7 +291,7 @@ static void __init imx6q_init_irq(void) static void __init imx6q_timer_init(void) { mx6q_clocks_init(); - twd_local_timer_of_register(); + clocksource_of_init(); imx_print_silicon_rev("i.MX6Q", imx6q_revision()); } diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index d1e2d59..f62b68d 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -9,6 +9,7 @@ */ #include <linux/init.h> +#include <linux/platform_device.h> #include <linux/gpio.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index 3d3c8a9..80db726 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -1,6 +1,2 @@ -# Common support -obj-y := icoll.o ocotp.o system.o timer.o mm.o - obj-$(CONFIG_PM) += pm.o - obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o diff --git a/arch/arm/mach-mxs/icoll.c b/arch/arm/mach-mxs/icoll.c deleted file mode 100644 index e26eeba..0000000 --- a/arch/arm/mach-mxs/icoll.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/irqdomain.h> -#include <linux/io.h> -#include <linux/of.h> -#include <linux/of_irq.h> -#include <asm/exception.h> -#include <mach/mxs.h> -#include <mach/common.h> - -#define HW_ICOLL_VECTOR 0x0000 -#define HW_ICOLL_LEVELACK 0x0010 -#define HW_ICOLL_CTRL 0x0020 -#define HW_ICOLL_STAT_OFFSET 0x0070 -#define HW_ICOLL_INTERRUPTn_SET(n) (0x0124 + (n) * 0x10) -#define HW_ICOLL_INTERRUPTn_CLR(n) (0x0128 + (n) * 0x10) -#define BM_ICOLL_INTERRUPTn_ENABLE 0x00000004 -#define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 0x1 - -#define ICOLL_NUM_IRQS 128 - -static void __iomem *icoll_base = MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR); -static struct irq_domain *icoll_domain; - -static void icoll_ack_irq(struct irq_data *d) -{ - /* - * The Interrupt Collector is able to prioritize irqs. - * Currently only level 0 is used. So acking can use - * BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 unconditionally. - */ - __raw_writel(BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0, - icoll_base + HW_ICOLL_LEVELACK); -} - -static void icoll_mask_irq(struct irq_data *d) -{ - __raw_writel(BM_ICOLL_INTERRUPTn_ENABLE, - icoll_base + HW_ICOLL_INTERRUPTn_CLR(d->hwirq)); -} - -static void icoll_unmask_irq(struct irq_data *d) -{ - __raw_writel(BM_ICOLL_INTERRUPTn_ENABLE, - icoll_base + HW_ICOLL_INTERRUPTn_SET(d->hwirq)); -} - -static struct irq_chip mxs_icoll_chip = { - .irq_ack = icoll_ack_irq, - .irq_mask = icoll_mask_irq, - .irq_unmask = icoll_unmask_irq, -}; - -asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs) -{ - u32 irqnr; - - do { - irqnr = __raw_readl(icoll_base + HW_ICOLL_STAT_OFFSET); - if (irqnr != 0x7f) { - __raw_writel(irqnr, icoll_base + HW_ICOLL_VECTOR); - irqnr = irq_find_mapping(icoll_domain, irqnr); - handle_IRQ(irqnr, regs); - continue; - } - break; - } while (1); -} - -static int icoll_irq_domain_map(struct irq_domain *d, unsigned int virq, - irq_hw_number_t hw) -{ - irq_set_chip_and_handler(virq, &mxs_icoll_chip, handle_level_irq); - set_irq_flags(virq, IRQF_VALID); - - return 0; -} - -static struct irq_domain_ops icoll_irq_domain_ops = { - .map = icoll_irq_domain_map, - .xlate = irq_domain_xlate_onecell, -}; - -static void __init icoll_of_init(struct device_node *np, - struct device_node *interrupt_parent) -{ - /* - * Interrupt Collector reset, which initializes the priority - * for each irq to level 0. - */ - mxs_reset_block(icoll_base + HW_ICOLL_CTRL); - - icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS, - &icoll_irq_domain_ops, NULL); - WARN_ON(!icoll_domain); -} - -static const struct of_device_id icoll_of_match[] __initconst = { - {.compatible = "fsl,icoll", .data = icoll_of_init}, - { /* sentinel */ } -}; - -void __init icoll_init_irq(void) -{ - of_irq_init(icoll_of_match); -} diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h deleted file mode 100644 index be5a9c9..0000000 --- a/arch/arm/mach-mxs/include/mach/common.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_MXS_COMMON_H__ -#define __MACH_MXS_COMMON_H__ - -extern const u32 *mxs_get_ocotp(void); -extern int mxs_reset_block(void __iomem *); -extern void mxs_timer_init(void); -extern void mxs_restart(char, const char *); -extern int mxs_saif_clkmux_select(unsigned int clkmux); - -extern int mx23_clocks_init(void); -extern void mx23_map_io(void); - -extern int mx28_clocks_init(void); -extern void mx28_map_io(void); - -extern void icoll_init_irq(void); -extern void icoll_handle_irq(struct pt_regs *); - -#endif /* __MACH_MXS_COMMON_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/debug-macro.S b/arch/arm/mach-mxs/include/mach/debug-macro.S index 90c6b78..d869515 100644 --- a/arch/arm/mach-mxs/include/mach/debug-macro.S +++ b/arch/arm/mach-mxs/include/mach/debug-macro.S @@ -11,16 +11,13 @@ * */ -#include <mach/mx23.h> -#include <mach/mx28.h> - #ifdef CONFIG_DEBUG_IMX23_UART -#define UART_PADDR MX23_DUART_BASE_ADDR +#define UART_PADDR 0x80070000 #elif defined (CONFIG_DEBUG_IMX28_UART) -#define UART_PADDR MX28_DUART_BASE_ADDR +#define UART_PADDR 0x80074000 #endif -#define UART_VADDR MXS_IO_ADDRESS(UART_PADDR) +#define UART_VADDR 0xfe100000 .macro addruart, rp, rv, tmp ldr \rp, =UART_PADDR @ physical diff --git a/arch/arm/mach-mxs/include/mach/digctl.h b/arch/arm/mach-mxs/include/mach/digctl.h deleted file mode 100644 index 1796406..0000000 --- a/arch/arm/mach-mxs/include/mach/digctl.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_DIGCTL_H__ -#define __MACH_DIGCTL_H__ - -/* MXS DIGCTL SAIF CLKMUX */ -#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT 0x0 -#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT 0x1 -#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0 0x2 -#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1 0x3 - -#define HW_DIGCTL_CTRL 0x0 -#define BP_DIGCTL_CTRL_SAIF_CLKMUX 10 -#define BM_DIGCTL_CTRL_SAIF_CLKMUX (0x3 << 10) -#define HW_DIGCTL_CHIPID 0x310 -#endif diff --git a/arch/arm/mach-mxs/include/mach/hardware.h b/arch/arm/mach-mxs/include/mach/hardware.h deleted file mode 100644 index 4c0e8a6..0000000 --- a/arch/arm/mach-mxs/include/mach/hardware.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __MACH_MXS_HARDWARE_H__ -#define __MACH_MXS_HARDWARE_H__ - -#endif /* __MACH_MXS_HARDWARE_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/mx23.h b/arch/arm/mach-mxs/include/mach/mx23.h deleted file mode 100644 index 599094b..0000000 --- a/arch/arm/mach-mxs/include/mach/mx23.h +++ /dev/null @@ -1,169 +0,0 @@ -/* - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef __MACH_MX23_H__ -#define __MACH_MX23_H__ - -#include <mach/mxs.h> - -/* - * OCRAM - */ -#define MX23_OCRAM_BASE_ADDR 0x00000000 -#define MX23_OCRAM_SIZE SZ_32K - -/* - * IO - */ -#define MX23_IO_BASE_ADDR 0x80000000 -#define MX23_IO_SIZE SZ_1M - -#define MX23_ICOLL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x000000) -#define MX23_APBH_DMA_BASE_ADDR (MX23_IO_BASE_ADDR + 0x004000) -#define MX23_BCH_BASE_ADDR (MX23_IO_BASE_ADDR + 0x00a000) -#define MX23_GPMI_BASE_ADDR (MX23_IO_BASE_ADDR + 0x00c000) -#define MX23_SSP1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x010000) -#define MX23_PINCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x018000) -#define MX23_DIGCTL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x01c000) -#define MX23_ETM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x020000) -#define MX23_APBX_DMA_BASE_ADDR (MX23_IO_BASE_ADDR + 0x024000) -#define MX23_DCP_BASE_ADDR (MX23_IO_BASE_ADDR + 0x028000) -#define MX23_PXP_BASE_ADDR (MX23_IO_BASE_ADDR + 0x02a000) -#define MX23_OCOTP_BASE_ADDR (MX23_IO_BASE_ADDR + 0x02c000) -#define MX23_AXI_AHB0_BASE_ADDR (MX23_IO_BASE_ADDR + 0x02e000) -#define MX23_LCDIF_BASE_ADDR (MX23_IO_BASE_ADDR + 0x030000) -#define MX23_SSP2_BASE_ADDR (MX23_IO_BASE_ADDR + 0x034000) -#define MX23_TVENC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x038000) -#define MX23_CLKCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x040000) -#define MX23_SAIF0_BASE_ADDR (MX23_IO_BASE_ADDR + 0x042000) -#define MX23_POWER_BASE_ADDR (MX23_IO_BASE_ADDR + 0x044000) -#define MX23_SAIF1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x046000) -#define MX23_AUDIOOUT_BASE_ADDR (MX23_IO_BASE_ADDR + 0x048000) -#define MX23_AUDIOIN_BASE_ADDR (MX23_IO_BASE_ADDR + 0x04c000) -#define MX23_LRADC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x050000) -#define MX23_SPDIF_BASE_ADDR (MX23_IO_BASE_ADDR + 0x054000) -#define MX23_I2C_BASE_ADDR (MX23_IO_BASE_ADDR + 0x058000) -#define MX23_RTC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x05c000) -#define MX23_PWM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x064000) -#define MX23_TIMROT_BASE_ADDR (MX23_IO_BASE_ADDR + 0x068000) -#define MX23_AUART1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x06c000) -#define MX23_AUART2_BASE_ADDR (MX23_IO_BASE_ADDR + 0x06e000) -#define MX23_DUART_BASE_ADDR (MX23_IO_BASE_ADDR + 0x070000) -#define MX23_USBPHY_BASE_ADDR (MX23_IO_BASE_ADDR + 0x07c000) -#define MX23_USBCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x080000) -#define MX23_DRAM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x0e0000) - -#define MX23_IO_P2V(x) MXS_IO_P2V(x) -#define MX23_IO_ADDRESS(x) IOMEM(MX23_IO_P2V(x)) - -/* - * IRQ - */ -#define MX23_INT_DUART 0 -#define MX23_INT_COMMS_RX 1 -#define MX23_INT_COMMS_TX 1 -#define MX23_INT_SSP2_ERROR 2 -#define MX23_INT_VDD5V 3 -#define MX23_INT_HEADPHONE_SHORT 4 -#define MX23_INT_DAC_DMA 5 -#define MX23_INT_DAC_ERROR 6 -#define MX23_INT_ADC_DMA 7 -#define MX23_INT_ADC_ERROR 8 -#define MX23_INT_SPDIF_DMA 9 -#define MX23_INT_SAIF2_DMA 9 -#define MX23_INT_SPDIF_ERROR 10 -#define MX23_INT_SAIF1_IRQ 10 -#define MX23_INT_SAIF2_IRQ 10 -#define MX23_INT_USB_CTRL 11 -#define MX23_INT_USB_WAKEUP 12 -#define MX23_INT_GPMI_DMA 13 -#define MX23_INT_SSP1_DMA 14 -#define MX23_INT_SSP1_ERROR 15 -#define MX23_INT_GPIO0 16 -#define MX23_INT_GPIO1 17 -#define MX23_INT_GPIO2 18 -#define MX23_INT_SAIF1_DMA 19 -#define MX23_INT_SSP2_DMA 20 -#define MX23_INT_ECC8_IRQ 21 -#define MX23_INT_RTC_ALARM 22 -#define MX23_INT_AUART1_TX_DMA 23 -#define MX23_INT_AUART1 24 -#define MX23_INT_AUART1_RX_DMA 25 -#define MX23_INT_I2C_DMA 26 -#define MX23_INT_I2C_ERROR 27 -#define MX23_INT_TIMER0 28 -#define MX23_INT_TIMER1 29 -#define MX23_INT_TIMER2 30 -#define MX23_INT_TIMER3 31 -#define MX23_INT_BATT_BRNOUT 32 -#define MX23_INT_VDDD_BRNOUT 33 -#define MX23_INT_VDDIO_BRNOUT 34 -#define MX23_INT_VDD18_BRNOUT 35 -#define MX23_INT_TOUCH_DETECT 36 -#define MX23_INT_LRADC_CH0 37 -#define MX23_INT_LRADC_CH1 38 -#define MX23_INT_LRADC_CH2 39 -#define MX23_INT_LRADC_CH3 40 -#define MX23_INT_LRADC_CH4 41 -#define MX23_INT_LRADC_CH5 42 -#define MX23_INT_LRADC_CH6 43 -#define MX23_INT_LRADC_CH7 44 -#define MX23_INT_LCDIF_DMA 45 -#define MX23_INT_LCDIF_ERROR 46 -#define MX23_INT_DIGCTL_DEBUG_TRAP 47 -#define MX23_INT_RTC_1MSEC 48 -#define MX23_INT_DRI_DMA 49 -#define MX23_INT_DRI_ATTENTION 50 -#define MX23_INT_GPMI_ATTENTION 51 -#define MX23_INT_IR 52 -#define MX23_INT_DCP_VMI 53 -#define MX23_INT_DCP 54 -#define MX23_INT_BCH 56 -#define MX23_INT_PXP 57 -#define MX23_INT_AUART2_TX_DMA 58 -#define MX23_INT_AUART2 59 -#define MX23_INT_AUART2_RX_DMA 60 -#define MX23_INT_VDAC_DETECT 61 -#define MX23_INT_VDD5V_DROOP 64 -#define MX23_INT_DCDC4P2_BO 65 - -/* - * APBH DMA - */ -#define MX23_DMA_SSP1 1 -#define MX23_DMA_SSP2 2 -#define MX23_DMA_GPMI0 4 -#define MX23_DMA_GPMI1 5 -#define MX23_DMA_GPMI2 6 -#define MX23_DMA_GPMI3 7 - -/* - * APBX DMA - */ -#define MX23_DMA_ADC 0 -#define MX23_DMA_DAC 1 -#define MX23_DMA_SPDIF 2 -#define MX23_DMA_I2C 3 -#define MX23_DMA_SAIF0 4 -#define MX23_DMA_UART0_RX 6 -#define MX23_DMA_UART0_TX 7 -#define MX23_DMA_UART1_RX 8 -#define MX23_DMA_UART1_TX 9 -#define MX23_DMA_SAIF1 10 - -#endif /* __MACH_MX23_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/mx28.h b/arch/arm/mach-mxs/include/mach/mx28.h deleted file mode 100644 index 30c7990..0000000 --- a/arch/arm/mach-mxs/include/mach/mx28.h +++ /dev/null @@ -1,225 +0,0 @@ -/* - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef __MACH_MX28_H__ -#define __MACH_MX28_H__ - -#include <mach/mxs.h> - -/* - * OCRAM - */ -#define MX28_OCRAM_BASE_ADDR 0x00000000 -#define MX28_OCRAM_SIZE SZ_128K - -/* - * IO - */ -#define MX28_IO_BASE_ADDR 0x80000000 -#define MX28_IO_SIZE SZ_1M - -#define MX28_ICOLL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x000000) -#define MX28_HSADC_BASE_ADDR (MX28_IO_BASE_ADDR + 0x002000) -#define MX28_APBH_DMA_BASE_ADDR (MX28_IO_BASE_ADDR + 0x004000) -#define MX28_PERFMON_BASE_ADDR (MX28_IO_BASE_ADDR + 0x006000) -#define MX28_BCH_BASE_ADDR (MX28_IO_BASE_ADDR + 0x00a000) -#define MX28_GPMI_BASE_ADDR (MX28_IO_BASE_ADDR + 0x00c000) -#define MX28_SSP0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x010000) -#define MX28_SSP1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x012000) -#define MX28_SSP2_BASE_ADDR (MX28_IO_BASE_ADDR + 0x014000) -#define MX28_SSP3_BASE_ADDR (MX28_IO_BASE_ADDR + 0x016000) -#define MX28_PINCTRL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x018000) -#define MX28_DIGCTL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x01c000) -#define MX28_ETM_BASE_ADDR (MX28_IO_BASE_ADDR + 0x022000) -#define MX28_APBX_DMA_BASE_ADDR (MX28_IO_BASE_ADDR + 0x024000) -#define MX28_DCP_BASE_ADDR (MX28_IO_BASE_ADDR + 0x028000) -#define MX28_PXP_BASE_ADDR (MX28_IO_BASE_ADDR + 0x02a000) -#define MX28_OCOTP_BASE_ADDR (MX28_IO_BASE_ADDR + 0x02c000) -#define MX28_AXI_AHB0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x02e000) -#define MX28_LCDIF_BASE_ADDR (MX28_IO_BASE_ADDR + 0x030000) -#define MX28_CAN0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x032000) -#define MX28_CAN1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x034000) -#define MX28_SIMDBG_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c000) -#define MX28_SIMGPMISEL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c200) -#define MX28_SIMSSPSEL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c300) -#define MX28_SIMMEMSEL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c400) -#define MX28_GPIOMON_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c500) -#define MX28_SIMENET_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c700) -#define MX28_ARMJTAG_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c800) -#define MX28_CLKCTRL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x040000) -#define MX28_SAIF0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x042000) -#define MX28_POWER_BASE_ADDR (MX28_IO_BASE_ADDR + 0x044000) -#define MX28_SAIF1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x046000) -#define MX28_LRADC_BASE_ADDR (MX28_IO_BASE_ADDR + 0x050000) -#define MX28_SPDIF_BASE_ADDR (MX28_IO_BASE_ADDR + 0x054000) -#define MX28_RTC_BASE_ADDR (MX28_IO_BASE_ADDR + 0x056000) -#define MX28_I2C0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x058000) -#define MX28_I2C1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x05a000) -#define MX28_PWM_BASE_ADDR (MX28_IO_BASE_ADDR + 0x064000) -#define MX28_TIMROT_BASE_ADDR (MX28_IO_BASE_ADDR + 0x068000) -#define MX28_AUART0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x06a000) -#define MX28_AUART1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x06c000) -#define MX28_AUART2_BASE_ADDR (MX28_IO_BASE_ADDR + 0x06e000) -#define MX28_AUART3_BASE_ADDR (MX28_IO_BASE_ADDR + 0x070000) -#define MX28_AUART4_BASE_ADDR (MX28_IO_BASE_ADDR + 0x072000) -#define MX28_DUART_BASE_ADDR (MX28_IO_BASE_ADDR + 0x074000) -#define MX28_USBPHY0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x07C000) -#define MX28_USBPHY1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x07e000) -#define MX28_USBCTRL0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x080000) -#define MX28_USBCTRL1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x090000) -#define MX28_DFLPT_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0c0000) -#define MX28_DRAM_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0e0000) -#define MX28_ENET_MAC0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0f0000) -#define MX28_ENET_MAC1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0f4000) - -#define MX28_IO_P2V(x) MXS_IO_P2V(x) -#define MX28_IO_ADDRESS(x) IOMEM(MX28_IO_P2V(x)) - -/* - * IRQ - */ -#define MX28_INT_BATT_BRNOUT 0 -#define MX28_INT_VDDD_BRNOUT 1 -#define MX28_INT_VDDIO_BRNOUT 2 -#define MX28_INT_VDDA_BRNOUT 3 -#define MX28_INT_VDD5V_DROOP 4 -#define MX28_INT_DCDC4P2_BRNOUT 5 -#define MX28_INT_VDD5V 6 -#define MX28_INT_CAN0 8 -#define MX28_INT_CAN1 9 -#define MX28_INT_LRADC_TOUCH 10 -#define MX28_INT_HSADC 13 -#define MX28_INT_LRADC_THRESH0 14 -#define MX28_INT_LRADC_THRESH1 15 -#define MX28_INT_LRADC_CH0 16 -#define MX28_INT_LRADC_CH1 17 -#define MX28_INT_LRADC_CH2 18 -#define MX28_INT_LRADC_CH3 19 -#define MX28_INT_LRADC_CH4 20 -#define MX28_INT_LRADC_CH5 21 -#define MX28_INT_LRADC_CH6 22 -#define MX28_INT_LRADC_CH7 23 -#define MX28_INT_LRADC_BUTTON0 24 -#define MX28_INT_LRADC_BUTTON1 25 -#define MX28_INT_PERFMON 27 -#define MX28_INT_RTC_1MSEC 28 -#define MX28_INT_RTC_ALARM 29 -#define MX28_INT_COMMS 31 -#define MX28_INT_EMI_ERR 32 -#define MX28_INT_LCDIF 38 -#define MX28_INT_PXP 39 -#define MX28_INT_BCH 41 -#define MX28_INT_GPMI 42 -#define MX28_INT_SPDIF_ERROR 45 -#define MX28_INT_DUART 47 -#define MX28_INT_TIMER0 48 -#define MX28_INT_TIMER1 49 -#define MX28_INT_TIMER2 50 -#define MX28_INT_TIMER3 51 -#define MX28_INT_DCP_VMI 52 -#define MX28_INT_DCP 53 -#define MX28_INT_DCP_SECURE 54 -#define MX28_INT_SAIF1 58 -#define MX28_INT_SAIF0 59 -#define MX28_INT_SPDIF_DMA 66 -#define MX28_INT_I2C0_DMA 68 -#define MX28_INT_I2C1_DMA 69 -#define MX28_INT_AUART0_RX_DMA 70 -#define MX28_INT_AUART0_TX_DMA 71 -#define MX28_INT_AUART1_RX_DMA 72 -#define MX28_INT_AUART1_TX_DMA 73 -#define MX28_INT_AUART2_RX_DMA 74 -#define MX28_INT_AUART2_TX_DMA 75 -#define MX28_INT_AUART3_RX_DMA 76 -#define MX28_INT_AUART3_TX_DMA 77 -#define MX28_INT_AUART4_RX_DMA 78 -#define MX28_INT_AUART4_TX_DMA 79 -#define MX28_INT_SAIF0_DMA 80 -#define MX28_INT_SAIF1_DMA 81 -#define MX28_INT_SSP0_DMA 82 -#define MX28_INT_SSP1_DMA 83 -#define MX28_INT_SSP2_DMA 84 -#define MX28_INT_SSP3_DMA 85 -#define MX28_INT_LCDIF_DMA 86 -#define MX28_INT_HSADC_DMA 87 -#define MX28_INT_GPMI_DMA 88 -#define MX28_INT_DIGCTL_DEBUG_TRAP 89 -#define MX28_INT_USB1 92 -#define MX28_INT_USB0 93 -#define MX28_INT_USB1_WAKEUP 94 -#define MX28_INT_USB0_WAKEUP 95 -#define MX28_INT_SSP0_ERROR 96 -#define MX28_INT_SSP1_ERROR 97 -#define MX28_INT_SSP2_ERROR 98 -#define MX28_INT_SSP3_ERROR 99 -#define MX28_INT_ENET_SWI 100 -#define MX28_INT_ENET_MAC0 101 -#define MX28_INT_ENET_MAC1 102 -#define MX28_INT_ENET_MAC0_1588 103 -#define MX28_INT_ENET_MAC1_1588 104 -#define MX28_INT_I2C1_ERROR 110 -#define MX28_INT_I2C0_ERROR 111 -#define MX28_INT_AUART0 112 -#define MX28_INT_AUART1 113 -#define MX28_INT_AUART2 114 -#define MX28_INT_AUART3 115 -#define MX28_INT_AUART4 116 -#define MX28_INT_GPIO4 123 -#define MX28_INT_GPIO3 124 -#define MX28_INT_GPIO2 125 -#define MX28_INT_GPIO1 126 -#define MX28_INT_GPIO0 127 - -/* - * APBH DMA - */ -#define MX28_DMA_SSP0 0 -#define MX28_DMA_SSP1 1 -#define MX28_DMA_SSP2 2 -#define MX28_DMA_SSP3 3 -#define MX28_DMA_GPMI0 4 -#define MX28_DMA_GPMI1 5 -#define MX28_DMA_GPMI2 6 -#define MX28_DMA_GPMI3 7 -#define MX28_DMA_GPMI4 8 -#define MX28_DMA_GPMI5 9 -#define MX28_DMA_GPMI6 10 -#define MX28_DMA_GPMI7 11 -#define MX28_DMA_HSADC 12 -#define MX28_DMA_LCDIF 13 - -/* - * APBX DMA - */ -#define MX28_DMA_AUART4_RX 0 -#define MX28_DMA_AUART4_TX 1 -#define MX28_DMA_SPDIF_TX 2 -#define MX28_DMA_SAIF0 4 -#define MX28_DMA_SAIF1 5 -#define MX28_DMA_I2C0 6 -#define MX28_DMA_I2C1 7 -#define MX28_DMA_AUART0_RX 8 -#define MX28_DMA_AUART0_TX 9 -#define MX28_DMA_AUART1_RX 10 -#define MX28_DMA_AUART1_TX 11 -#define MX28_DMA_AUART2_RX 12 -#define MX28_DMA_AUART2_TX 13 -#define MX28_DMA_AUART3_RX 14 -#define MX28_DMA_AUART3_TX 15 - -#endif /* __MACH_MX28_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h deleted file mode 100644 index 7d4fb6d..0000000 --- a/arch/arm/mach-mxs/include/mach/mxs.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef __MACH_MXS_H__ -#define __MACH_MXS_H__ - -#ifndef __ASSEMBLER__ -#include <linux/io.h> -#endif -#include <asm/mach-types.h> -#include <mach/digctl.h> -#include <mach/hardware.h> - -/* - * IO addresses common to MXS-based - */ -#define MXS_IO_BASE_ADDR 0x80000000 -#define MXS_IO_SIZE SZ_1M - -#define MXS_ICOLL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x000000) -#define MXS_APBH_DMA_BASE_ADDR (MXS_IO_BASE_ADDR + 0x004000) -#define MXS_BCH_BASE_ADDR (MXS_IO_BASE_ADDR + 0x00a000) -#define MXS_GPMI_BASE_ADDR (MXS_IO_BASE_ADDR + 0x00c000) -#define MXS_PINCTRL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x018000) -#define MXS_DIGCTL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x01c000) -#define MXS_APBX_DMA_BASE_ADDR (MXS_IO_BASE_ADDR + 0x024000) -#define MXS_DCP_BASE_ADDR (MXS_IO_BASE_ADDR + 0x028000) -#define MXS_PXP_BASE_ADDR (MXS_IO_BASE_ADDR + 0x02a000) -#define MXS_OCOTP_BASE_ADDR (MXS_IO_BASE_ADDR + 0x02c000) -#define MXS_AXI_AHB0_BASE_ADDR (MXS_IO_BASE_ADDR + 0x02e000) -#define MXS_LCDIF_BASE_ADDR (MXS_IO_BASE_ADDR + 0x030000) -#define MXS_CLKCTRL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x040000) -#define MXS_SAIF0_BASE_ADDR (MXS_IO_BASE_ADDR + 0x042000) -#define MXS_POWER_BASE_ADDR (MXS_IO_BASE_ADDR + 0x044000) -#define MXS_SAIF1_BASE_ADDR (MXS_IO_BASE_ADDR + 0x046000) -#define MXS_LRADC_BASE_ADDR (MXS_IO_BASE_ADDR + 0x050000) -#define MXS_SPDIF_BASE_ADDR (MXS_IO_BASE_ADDR + 0x054000) -#define MXS_I2C0_BASE_ADDR (MXS_IO_BASE_ADDR + 0x058000) -#define MXS_PWM_BASE_ADDR (MXS_IO_BASE_ADDR + 0x064000) -#define MXS_TIMROT_BASE_ADDR (MXS_IO_BASE_ADDR + 0x068000) -#define MXS_AUART1_BASE_ADDR (MXS_IO_BASE_ADDR + 0x06c000) -#define MXS_AUART2_BASE_ADDR (MXS_IO_BASE_ADDR + 0x06e000) -#define MXS_DRAM_BASE_ADDR (MXS_IO_BASE_ADDR + 0x0e0000) - -/* - * It maps the whole address space to [0xf4000000, 0xf50fffff]. - * - * OCRAM 0x00000000+0x020000 -> 0xf4000000+0x020000 - * IO 0x80000000+0x100000 -> 0xf5000000+0x100000 - */ -#define MXS_IO_P2V(x) (0xf4000000 + \ - (((x) & 0x80000000) >> 7) + \ - (((x) & 0x000fffff))) - -#define MXS_IO_ADDRESS(x) IOMEM(MXS_IO_P2V(x)) - -#define mxs_map_entry(soc, name, _type) { \ - .virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \ - .pfn = __phys_to_pfn(soc ## _ ## name ## _BASE_ADDR), \ - .length = soc ## _ ## name ## _SIZE, \ - .type = _type, \ -} - -#define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr)) - -#define MXS_SET_ADDR 0x4 -#define MXS_CLR_ADDR 0x8 -#define MXS_TOG_ADDR 0xc - -#ifndef __ASSEMBLER__ -static inline void __mxs_setl(u32 mask, void __iomem *reg) -{ - __raw_writel(mask, reg + MXS_SET_ADDR); -} - -static inline void __mxs_clrl(u32 mask, void __iomem *reg) -{ - __raw_writel(mask, reg + MXS_CLR_ADDR); -} - -static inline void __mxs_togl(u32 mask, void __iomem *reg) -{ - __raw_writel(mask, reg + MXS_TOG_ADDR); -} - -/* - * MXS CPU types - */ -#define MXS_CHIPID (MXS_IO_ADDRESS(MXS_DIGCTL_BASE_ADDR) + HW_DIGCTL_CHIPID) - -static inline int cpu_is_mx23(void) -{ - return ((__raw_readl(MXS_CHIPID) >> 16) == 0x3780); -} - -static inline int cpu_is_mx28(void) -{ - return ((__raw_readl(MXS_CHIPID) >> 16) == 0x2800); -} -#endif - -#endif /* __MACH_MXS_H__ */ diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 3218f1f..f39ab80 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -11,132 +11,52 @@ */ #include <linux/clk.h> +#include <linux/clk/mxs.h> #include <linux/clkdev.h> +#include <linux/clocksource.h> #include <linux/can/platform/flexcan.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/gpio.h> #include <linux/init.h> +#include <linux/irqchip.h> +#include <linux/irqchip/mxs.h> #include <linux/micrel_phy.h> -#include <linux/mxsfb.h> +#include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/phy.h> #include <linux/pinctrl/consumer.h> #include <asm/mach/arch.h> +#include <asm/mach/map.h> #include <asm/mach/time.h> -#include <mach/common.h> -#include <mach/digctl.h> -#include <mach/mxs.h> - -static struct fb_videomode mx23evk_video_modes[] = { - { - .name = "Samsung-LMS430HF02", - .refresh = 60, - .xres = 480, - .yres = 272, - .pixclock = 108096, /* picosecond (9.2 MHz) */ - .left_margin = 15, - .right_margin = 8, - .upper_margin = 12, - .lower_margin = 4, - .hsync_len = 1, - .vsync_len = 1, - .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT | - FB_SYNC_DOTCLK_FAILING_ACT, - }, -}; +#include <asm/system_misc.h> -static struct fb_videomode mx28evk_video_modes[] = { - { - .name = "Seiko-43WVF1G", - .refresh = 60, - .xres = 800, - .yres = 480, - .pixclock = 29851, /* picosecond (33.5 MHz) */ - .left_margin = 89, - .right_margin = 164, - .upper_margin = 23, - .lower_margin = 10, - .hsync_len = 10, - .vsync_len = 10, - .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT | - FB_SYNC_DOTCLK_FAILING_ACT, - }, -}; +/* MXS DIGCTL SAIF CLKMUX */ +#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT 0x0 +#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT 0x1 +#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0 0x2 +#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1 0x3 -static struct fb_videomode m28evk_video_modes[] = { - { - .name = "Ampire AM-800480R2TMQW-T01H", - .refresh = 60, - .xres = 800, - .yres = 480, - .pixclock = 30066, /* picosecond (33.26 MHz) */ - .left_margin = 0, - .right_margin = 256, - .upper_margin = 0, - .lower_margin = 45, - .hsync_len = 1, - .vsync_len = 1, - .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT, - }, -}; +#define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr)) -static struct fb_videomode apx4devkit_video_modes[] = { - { - .name = "HannStar PJ70112A", - .refresh = 60, - .xres = 800, - .yres = 480, - .pixclock = 33333, /* picosecond (30.00 MHz) */ - .left_margin = 88, - .right_margin = 40, - .upper_margin = 32, - .lower_margin = 13, - .hsync_len = 48, - .vsync_len = 3, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT | - FB_SYNC_DATA_ENABLE_HIGH_ACT | - FB_SYNC_DOTCLK_FAILING_ACT, - }, -}; +#define MXS_SET_ADDR 0x4 +#define MXS_CLR_ADDR 0x8 +#define MXS_TOG_ADDR 0xc -static struct fb_videomode apf28dev_video_modes[] = { - { - .name = "LW700", - .refresh = 60, - .xres = 800, - .yres = 480, - .pixclock = 30303, /* picosecond */ - .left_margin = 96, - .right_margin = 96, /* at least 3 & 1 */ - .upper_margin = 0x14, - .lower_margin = 0x15, - .hsync_len = 64, - .vsync_len = 4, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT | - FB_SYNC_DATA_ENABLE_HIGH_ACT | - FB_SYNC_DOTCLK_FAILING_ACT, - }, -}; +static inline void __mxs_setl(u32 mask, void __iomem *reg) +{ + __raw_writel(mask, reg + MXS_SET_ADDR); +} -static struct fb_videomode cfa10049_video_modes[] = { - { - .name = "Himax HX8357-B", - .refresh = 60, - .xres = 320, - .yres = 480, - .pixclock = 108506, /* picosecond (9.216 MHz) */ - .left_margin = 2, - .right_margin = 2, - .upper_margin = 2, - .lower_margin = 2, - .hsync_len = 15, - .vsync_len = 15, - .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT - }, -}; +static inline void __mxs_clrl(u32 mask, void __iomem *reg) +{ + __raw_writel(mask, reg + MXS_CLR_ADDR); +} -static struct mxsfb_platform_data mxsfb_pdata __initdata; +static inline void __mxs_togl(u32 mask, void __iomem *reg) +{ + __raw_writel(mask, reg + MXS_TOG_ADDR); +} /* * MX28EVK_FLEXCAN_SWITCH is shared between both flexcan controllers @@ -168,21 +88,85 @@ static void mx28evk_flexcan1_switch(int enable) static struct flexcan_platform_data flexcan_pdata[2]; static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("fsl,imx23-lcdif", 0x80030000, NULL, &mxsfb_pdata), - OF_DEV_AUXDATA("fsl,imx28-lcdif", 0x80030000, NULL, &mxsfb_pdata), OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80032000, NULL, &flexcan_pdata[0]), OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80034000, NULL, &flexcan_pdata[1]), { /* sentinel */ } }; -static void __init imx23_timer_init(void) -{ - mx23_clocks_init(); -} +#define OCOTP_WORD_OFFSET 0x20 +#define OCOTP_WORD_COUNT 0x20 + +#define BM_OCOTP_CTRL_BUSY (1 << 8) +#define BM_OCOTP_CTRL_ERROR (1 << 9) +#define BM_OCOTP_CTRL_RD_BANK_OPEN (1 << 12) + +static DEFINE_MUTEX(ocotp_mutex); +static u32 ocotp_words[OCOTP_WORD_COUNT]; -static void __init imx28_timer_init(void) +static const u32 *mxs_get_ocotp(void) { - mx28_clocks_init(); + struct device_node *np; + void __iomem *ocotp_base; + int timeout = 0x400; + size_t i; + static int once; + + if (once) + return ocotp_words; + + np = of_find_compatible_node(NULL, NULL, "fsl,ocotp"); + ocotp_base = of_iomap(np, 0); + WARN_ON(!ocotp_base); + + mutex_lock(&ocotp_mutex); + + /* + * clk_enable(hbus_clk) for ocotp can be skipped + * as it must be on when system is running. + */ + + /* try to clear ERROR bit */ + __mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base); + + /* check both BUSY and ERROR cleared */ + while ((__raw_readl(ocotp_base) & + (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout) + cpu_relax(); + + if (unlikely(!timeout)) + goto error_unlock; + + /* open OCOTP banks for read */ + __mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); + + /* approximately wait 32 hclk cycles */ + udelay(1); + + /* poll BUSY bit becoming cleared */ + timeout = 0x400; + while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout) + cpu_relax(); + + if (unlikely(!timeout)) + goto error_unlock; + + for (i = 0; i < OCOTP_WORD_COUNT; i++) + ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET + + i * 0x10); + + /* close banks for power saving */ + __mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); + + once = 1; + + mutex_unlock(&ocotp_mutex); + + return ocotp_words; + +error_unlock: + mutex_unlock(&ocotp_mutex); + pr_err("%s: timeout in reading OCOTP\n", __func__); + return NULL; } enum mac_oui { @@ -253,14 +237,6 @@ static void __init update_fec_mac_prop(enum mac_oui oui) } } -static void __init imx23_evk_init(void) -{ - mxsfb_pdata.mode_list = mx23evk_video_modes; - mxsfb_pdata.mode_count = ARRAY_SIZE(mx23evk_video_modes); - mxsfb_pdata.default_bpp = 32; - mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT; -} - static inline void enable_clk_enet_out(void) { struct clk *clk = clk_get_sys("enet_out", NULL); @@ -271,14 +247,8 @@ static inline void enable_clk_enet_out(void) static void __init imx28_evk_init(void) { - enable_clk_enet_out(); update_fec_mac_prop(OUI_FSL); - mxsfb_pdata.mode_list = mx28evk_video_modes; - mxsfb_pdata.mode_count = ARRAY_SIZE(mx28evk_video_modes); - mxsfb_pdata.default_bpp = 32; - mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT; - mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0); } @@ -291,19 +261,6 @@ static void __init imx28_evk_post_init(void) } } -static void __init m28evk_init(void) -{ - mxsfb_pdata.mode_list = m28evk_video_modes; - mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes); - mxsfb_pdata.default_bpp = 16; - mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT; -} - -static void __init sc_sps1_init(void) -{ - enable_clk_enet_out(); -} - static int apx4devkit_phy_fixup(struct phy_device *phy) { phy->dev_flags |= MICREL_PHY_50MHZ_CLK; @@ -317,11 +274,6 @@ static void __init apx4devkit_init(void) if (IS_BUILTIN(CONFIG_PHYLIB)) phy_register_fixup_for_uid(PHY_ID_KSZ8051, MICREL_PHY_ID_MASK, apx4devkit_phy_fixup); - - mxsfb_pdata.mode_list = apx4devkit_video_modes; - mxsfb_pdata.mode_count = ARRAY_SIZE(apx4devkit_video_modes); - mxsfb_pdata.default_bpp = 32; - mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT; } #define ENET0_MDC__GPIO_4_0 MXS_GPIO_NR(4, 0) @@ -400,49 +352,24 @@ static void __init tx28_post_init(void) static void __init cfa10049_init(void) { - enable_clk_enet_out(); update_fec_mac_prop(OUI_CRYSTALFONTZ); - - mxsfb_pdata.mode_list = cfa10049_video_modes; - mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes); - mxsfb_pdata.default_bpp = 32; - mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT; } static void __init cfa10037_init(void) { - enable_clk_enet_out(); update_fec_mac_prop(OUI_CRYSTALFONTZ); } -static void __init apf28_init(void) -{ - enable_clk_enet_out(); - - mxsfb_pdata.mode_list = apf28dev_video_modes; - mxsfb_pdata.mode_count = ARRAY_SIZE(apf28dev_video_modes); - mxsfb_pdata.default_bpp = 16; - mxsfb_pdata.ld_intf_width = STMLCDIF_16BIT; -} - static void __init mxs_machine_init(void) { if (of_machine_is_compatible("fsl,imx28-evk")) imx28_evk_init(); - else if (of_machine_is_compatible("fsl,imx23-evk")) - imx23_evk_init(); - else if (of_machine_is_compatible("denx,m28evk")) - m28evk_init(); else if (of_machine_is_compatible("bluegiga,apx4devkit")) apx4devkit_init(); else if (of_machine_is_compatible("crystalfontz,cfa10037")) cfa10037_init(); else if (of_machine_is_compatible("crystalfontz,cfa10049")) cfa10049_init(); - else if (of_machine_is_compatible("armadeus,imx28-apf28")) - apf28_init(); - else if (of_machine_is_compatible("schulercontrol,imx28-sps1")) - sc_sps1_init(); of_platform_populate(NULL, of_default_bus_match_table, mxs_auxdata_lookup, NULL); @@ -454,32 +381,62 @@ static void __init mxs_machine_init(void) imx28_evk_post_init(); } -static const char *imx23_dt_compat[] __initdata = { - "fsl,imx23", - NULL, -}; +#define MX23_CLKCTRL_RESET_OFFSET 0x120 +#define MX28_CLKCTRL_RESET_OFFSET 0x1e0 +#define MXS_CLKCTRL_RESET_CHIP (1 << 1) + +/* + * Reset the system. It is called by machine_restart(). + */ +static void mxs_restart(char mode, const char *cmd) +{ + struct device_node *np; + void __iomem *reset_addr; + + np = of_find_compatible_node(NULL, NULL, "fsl,clkctrl"); + reset_addr = of_iomap(np, 0); + if (!reset_addr) + goto soft; + + if (of_device_is_compatible(np, "fsl,imx23-clkctrl")) + reset_addr += MX23_CLKCTRL_RESET_OFFSET; + else + reset_addr += MX28_CLKCTRL_RESET_OFFSET; + + /* reset the chip */ + __mxs_setl(MXS_CLKCTRL_RESET_CHIP, reset_addr); + + pr_err("Failed to assert the chip reset\n"); + + /* Delay to allow the serial port to show the message */ + mdelay(50); + +soft: + /* We'll take a jump through zero as a poor second */ + soft_restart(0); +} -static const char *imx28_dt_compat[] __initdata = { +static void __init mxs_timer_init(void) +{ + if (of_machine_is_compatible("fsl,imx23")) + mx23_clocks_init(); + else + mx28_clocks_init(); + clocksource_of_init(); +} + +static const char *mxs_dt_compat[] __initdata = { "fsl,imx28", + "fsl,imx23", NULL, }; -DT_MACHINE_START(IMX23, "Freescale i.MX23 (Device Tree)") - .map_io = mx23_map_io, - .init_irq = icoll_init_irq, - .handle_irq = icoll_handle_irq, - .init_time = imx23_timer_init, - .init_machine = mxs_machine_init, - .dt_compat = imx23_dt_compat, - .restart = mxs_restart, -MACHINE_END - -DT_MACHINE_START(IMX28, "Freescale i.MX28 (Device Tree)") - .map_io = mx28_map_io, - .init_irq = icoll_init_irq, +DT_MACHINE_START(MXS, "Freescale MXS (Device Tree)") + .map_io = debug_ll_io_init, + .init_irq = irqchip_init, .handle_irq = icoll_handle_irq, - .init_time = imx28_timer_init, + .init_time = mxs_timer_init, .init_machine = mxs_machine_init, - .dt_compat = imx28_dt_compat, + .dt_compat = mxs_dt_compat, .restart = mxs_restart, MACHINE_END diff --git a/arch/arm/mach-mxs/mm.c b/arch/arm/mach-mxs/mm.c deleted file mode 100644 index e63b7d8..0000000 --- a/arch/arm/mach-mxs/mm.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - * - * Create static mapping between physical to virtual memory. - */ - -#include <linux/mm.h> -#include <linux/init.h> - -#include <asm/mach/map.h> - -#include <mach/mx23.h> -#include <mach/mx28.h> -#include <mach/common.h> - -/* - * Define the MX23 memory map. - */ -static struct map_desc mx23_io_desc[] __initdata = { - mxs_map_entry(MX23, OCRAM, MT_DEVICE), - mxs_map_entry(MX23, IO, MT_DEVICE), -}; - -/* - * Define the MX28 memory map. - */ -static struct map_desc mx28_io_desc[] __initdata = { - mxs_map_entry(MX28, OCRAM, MT_DEVICE), - mxs_map_entry(MX28, IO, MT_DEVICE), -}; - -/* - * This function initializes the memory map. It is called during the - * system startup to create static physical to virtual memory mappings - * for the IO modules. - */ -void __init mx23_map_io(void) -{ - iotable_init(mx23_io_desc, ARRAY_SIZE(mx23_io_desc)); -} - -void __init mx28_map_io(void) -{ - iotable_init(mx28_io_desc, ARRAY_SIZE(mx28_io_desc)); -} diff --git a/arch/arm/mach-mxs/ocotp.c b/arch/arm/mach-mxs/ocotp.c deleted file mode 100644 index 1dff467..0000000 --- a/arch/arm/mach-mxs/ocotp.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/mutex.h> - -#include <asm/processor.h> /* for cpu_relax() */ - -#include <mach/mxs.h> -#include <mach/common.h> - -#define OCOTP_WORD_OFFSET 0x20 -#define OCOTP_WORD_COUNT 0x20 - -#define BM_OCOTP_CTRL_BUSY (1 << 8) -#define BM_OCOTP_CTRL_ERROR (1 << 9) -#define BM_OCOTP_CTRL_RD_BANK_OPEN (1 << 12) - -static DEFINE_MUTEX(ocotp_mutex); -static u32 ocotp_words[OCOTP_WORD_COUNT]; - -const u32 *mxs_get_ocotp(void) -{ - void __iomem *ocotp_base = MXS_IO_ADDRESS(MXS_OCOTP_BASE_ADDR); - int timeout = 0x400; - size_t i; - static int once = 0; - - if (once) - return ocotp_words; - - mutex_lock(&ocotp_mutex); - - /* - * clk_enable(hbus_clk) for ocotp can be skipped - * as it must be on when system is running. - */ - - /* try to clear ERROR bit */ - __mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base); - - /* check both BUSY and ERROR cleared */ - while ((__raw_readl(ocotp_base) & - (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout) - cpu_relax(); - - if (unlikely(!timeout)) - goto error_unlock; - - /* open OCOTP banks for read */ - __mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); - - /* approximately wait 32 hclk cycles */ - udelay(1); - - /* poll BUSY bit becoming cleared */ - timeout = 0x400; - while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout) - cpu_relax(); - - if (unlikely(!timeout)) - goto error_unlock; - - for (i = 0; i < OCOTP_WORD_COUNT; i++) - ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET + - i * 0x10); - - /* close banks for power saving */ - __mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); - - once = 1; - - mutex_unlock(&ocotp_mutex); - - return ocotp_words; - -error_unlock: - mutex_unlock(&ocotp_mutex); - pr_err("%s: timeout in reading OCOTP\n", __func__); - return NULL; -} diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c deleted file mode 100644 index 30042e2..0000000 --- a/arch/arm/mach-mxs/system.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright 2006-2007,2010 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/err.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/module.h> - -#include <asm/proc-fns.h> -#include <asm/system_misc.h> - -#include <mach/mxs.h> -#include <mach/common.h> - -#define MX23_CLKCTRL_RESET_OFFSET 0x120 -#define MX28_CLKCTRL_RESET_OFFSET 0x1e0 -#define MXS_CLKCTRL_RESET_CHIP (1 << 1) - -#define MXS_MODULE_CLKGATE (1 << 30) -#define MXS_MODULE_SFTRST (1 << 31) - -static void __iomem *mxs_clkctrl_reset_addr; - -/* - * Reset the system. It is called by machine_restart(). - */ -void mxs_restart(char mode, const char *cmd) -{ - /* reset the chip */ - __mxs_setl(MXS_CLKCTRL_RESET_CHIP, mxs_clkctrl_reset_addr); - - pr_err("Failed to assert the chip reset\n"); - - /* Delay to allow the serial port to show the message */ - mdelay(50); - - /* We'll take a jump through zero as a poor second */ - soft_restart(0); -} - -static int __init mxs_arch_reset_init(void) -{ - struct clk *clk; - - mxs_clkctrl_reset_addr = MXS_IO_ADDRESS(MXS_CLKCTRL_BASE_ADDR) + - (cpu_is_mx23() ? MX23_CLKCTRL_RESET_OFFSET : - MX28_CLKCTRL_RESET_OFFSET); - - clk = clk_get_sys("rtc", NULL); - if (!IS_ERR(clk)) - clk_prepare_enable(clk); - - return 0; -} -core_initcall(mxs_arch_reset_init); - -/* - * Clear the bit and poll it cleared. This is usually called with - * a reset address and mask being either SFTRST(bit 31) or CLKGATE - * (bit 30). - */ -static int clear_poll_bit(void __iomem *addr, u32 mask) -{ - int timeout = 0x400; - - /* clear the bit */ - __mxs_clrl(mask, addr); - - /* - * SFTRST needs 3 GPMI clocks to settle, the reference manual - * recommends to wait 1us. - */ - udelay(1); - - /* poll the bit becoming clear */ - while ((__raw_readl(addr) & mask) && --timeout) - /* nothing */; - - return !timeout; -} - -int mxs_reset_block(void __iomem *reset_addr) -{ - int ret; - int timeout = 0x400; - - /* clear and poll SFTRST */ - ret = clear_poll_bit(reset_addr, MXS_MODULE_SFTRST); - if (unlikely(ret)) - goto error; - - /* clear CLKGATE */ - __mxs_clrl(MXS_MODULE_CLKGATE, reset_addr); - - /* set SFTRST to reset the block */ - __mxs_setl(MXS_MODULE_SFTRST, reset_addr); - udelay(1); - - /* poll CLKGATE becoming set */ - while ((!(__raw_readl(reset_addr) & MXS_MODULE_CLKGATE)) && --timeout) - /* nothing */; - if (unlikely(!timeout)) - goto error; - - /* clear and poll SFTRST */ - ret = clear_poll_bit(reset_addr, MXS_MODULE_SFTRST); - if (unlikely(ret)) - goto error; - - /* clear and poll CLKGATE */ - ret = clear_poll_bit(reset_addr, MXS_MODULE_CLKGATE); - if (unlikely(ret)) - goto error; - - return 0; - -error: - pr_err("%s(%p): module reset timeout\n", __func__, reset_addr); - return -ETIMEDOUT; -} -EXPORT_SYMBOL(mxs_reset_block); diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c deleted file mode 100644 index 4210204..0000000 --- a/arch/arm/mach-mxs/timer.c +++ /dev/null @@ -1,306 +0,0 @@ -/* - * Copyright (C) 2000-2001 Deep Blue Solutions - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com) - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/err.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/clockchips.h> -#include <linux/clk.h> -#include <linux/of.h> -#include <linux/of_irq.h> - -#include <asm/mach/time.h> -#include <asm/sched_clock.h> -#include <mach/mxs.h> -#include <mach/common.h> - -/* - * There are 2 versions of the timrot on Freescale MXS-based SoCs. - * The v1 on MX23 only gets 16 bits counter, while v2 on MX28 - * extends the counter to 32 bits. - * - * The implementation uses two timers, one for clock_event and - * another for clocksource. MX28 uses timrot 0 and 1, while MX23 - * uses 0 and 2. - */ - -#define MX23_TIMROT_VERSION_OFFSET 0x0a0 -#define MX28_TIMROT_VERSION_OFFSET 0x120 -#define BP_TIMROT_MAJOR_VERSION 24 -#define BV_TIMROT_VERSION_1 0x01 -#define BV_TIMROT_VERSION_2 0x02 -#define timrot_is_v1() (timrot_major_version == BV_TIMROT_VERSION_1) - -/* - * There are 4 registers for each timrotv2 instance, and 2 registers - * for each timrotv1. So address step 0x40 in macros below strides - * one instance of timrotv2 while two instances of timrotv1. - * - * As the result, HW_TIMROT_XXXn(1) defines the address of timrot1 - * on MX28 while timrot2 on MX23. - */ -/* common between v1 and v2 */ -#define HW_TIMROT_ROTCTRL 0x00 -#define HW_TIMROT_TIMCTRLn(n) (0x20 + (n) * 0x40) -/* v1 only */ -#define HW_TIMROT_TIMCOUNTn(n) (0x30 + (n) * 0x40) -/* v2 only */ -#define HW_TIMROT_RUNNING_COUNTn(n) (0x30 + (n) * 0x40) -#define HW_TIMROT_FIXED_COUNTn(n) (0x40 + (n) * 0x40) - -#define BM_TIMROT_TIMCTRLn_RELOAD (1 << 6) -#define BM_TIMROT_TIMCTRLn_UPDATE (1 << 7) -#define BM_TIMROT_TIMCTRLn_IRQ_EN (1 << 14) -#define BM_TIMROT_TIMCTRLn_IRQ (1 << 15) -#define BP_TIMROT_TIMCTRLn_SELECT 0 -#define BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL 0x8 -#define BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL 0xb -#define BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS 0xf - -static struct clock_event_device mxs_clockevent_device; -static enum clock_event_mode mxs_clockevent_mode = CLOCK_EVT_MODE_UNUSED; - -static void __iomem *mxs_timrot_base = MXS_IO_ADDRESS(MXS_TIMROT_BASE_ADDR); -static u32 timrot_major_version; - -static inline void timrot_irq_disable(void) -{ - __mxs_clrl(BM_TIMROT_TIMCTRLn_IRQ_EN, - mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); -} - -static inline void timrot_irq_enable(void) -{ - __mxs_setl(BM_TIMROT_TIMCTRLn_IRQ_EN, - mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); -} - -static void timrot_irq_acknowledge(void) -{ - __mxs_clrl(BM_TIMROT_TIMCTRLn_IRQ, - mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); -} - -static cycle_t timrotv1_get_cycles(struct clocksource *cs) -{ - return ~((__raw_readl(mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1)) - & 0xffff0000) >> 16); -} - -static int timrotv1_set_next_event(unsigned long evt, - struct clock_event_device *dev) -{ - /* timrot decrements the count */ - __raw_writel(evt, mxs_timrot_base + HW_TIMROT_TIMCOUNTn(0)); - - return 0; -} - -static int timrotv2_set_next_event(unsigned long evt, - struct clock_event_device *dev) -{ - /* timrot decrements the count */ - __raw_writel(evt, mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(0)); - - return 0; -} - -static irqreturn_t mxs_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = dev_id; - - timrot_irq_acknowledge(); - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction mxs_timer_irq = { - .name = "MXS Timer Tick", - .dev_id = &mxs_clockevent_device, - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = mxs_timer_interrupt, -}; - -#ifdef DEBUG -static const char *clock_event_mode_label[] const = { - [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC", - [CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT", - [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN", - [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED" -}; -#endif /* DEBUG */ - -static void mxs_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - /* Disable interrupt in timer module */ - timrot_irq_disable(); - - if (mode != mxs_clockevent_mode) { - /* Set event time into the furthest future */ - if (timrot_is_v1()) - __raw_writel(0xffff, - mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1)); - else - __raw_writel(0xffffffff, - mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1)); - - /* Clear pending interrupt */ - timrot_irq_acknowledge(); - } - -#ifdef DEBUG - pr_info("%s: changing mode from %s to %s\n", __func__, - clock_event_mode_label[mxs_clockevent_mode], - clock_event_mode_label[mode]); -#endif /* DEBUG */ - - /* Remember timer mode */ - mxs_clockevent_mode = mode; - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - pr_err("%s: Periodic mode is not implemented\n", __func__); - break; - case CLOCK_EVT_MODE_ONESHOT: - timrot_irq_enable(); - break; - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_RESUME: - /* Left event sources disabled, no more interrupts appear */ - break; - } -} - -static struct clock_event_device mxs_clockevent_device = { - .name = "mxs_timrot", - .features = CLOCK_EVT_FEAT_ONESHOT, - .set_mode = mxs_set_mode, - .set_next_event = timrotv2_set_next_event, - .rating = 200, -}; - -static int __init mxs_clockevent_init(struct clk *timer_clk) -{ - if (timrot_is_v1()) - mxs_clockevent_device.set_next_event = timrotv1_set_next_event; - mxs_clockevent_device.cpumask = cpumask_of(0); - clockevents_config_and_register(&mxs_clockevent_device, - clk_get_rate(timer_clk), - timrot_is_v1() ? 0xf : 0x2, - timrot_is_v1() ? 0xfffe : 0xfffffffe); - - return 0; -} - -static struct clocksource clocksource_mxs = { - .name = "mxs_timer", - .rating = 200, - .read = timrotv1_get_cycles, - .mask = CLOCKSOURCE_MASK(16), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static u32 notrace mxs_read_sched_clock_v2(void) -{ - return ~readl_relaxed(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1)); -} - -static int __init mxs_clocksource_init(struct clk *timer_clk) -{ - unsigned int c = clk_get_rate(timer_clk); - - if (timrot_is_v1()) - clocksource_register_hz(&clocksource_mxs, c); - else { - clocksource_mmio_init(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1), - "mxs_timer", c, 200, 32, clocksource_mmio_readl_down); - setup_sched_clock(mxs_read_sched_clock_v2, 32, c); - } - - return 0; -} - -void __init mxs_timer_init(void) -{ - struct device_node *np; - struct clk *timer_clk; - int irq; - - np = of_find_compatible_node(NULL, NULL, "fsl,timrot"); - if (!np) { - pr_err("%s: failed find timrot node\n", __func__); - return; - } - - timer_clk = clk_get_sys("timrot", NULL); - if (IS_ERR(timer_clk)) { - pr_err("%s: failed to get clk\n", __func__); - return; - } - - clk_prepare_enable(timer_clk); - - /* - * Initialize timers to a known state - */ - mxs_reset_block(mxs_timrot_base + HW_TIMROT_ROTCTRL); - - /* get timrot version */ - timrot_major_version = __raw_readl(mxs_timrot_base + - (cpu_is_mx23() ? MX23_TIMROT_VERSION_OFFSET : - MX28_TIMROT_VERSION_OFFSET)); - timrot_major_version >>= BP_TIMROT_MAJOR_VERSION; - - /* one for clock_event */ - __raw_writel((timrot_is_v1() ? - BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL : - BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) | - BM_TIMROT_TIMCTRLn_UPDATE | - BM_TIMROT_TIMCTRLn_IRQ_EN, - mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); - - /* another for clocksource */ - __raw_writel((timrot_is_v1() ? - BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL : - BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) | - BM_TIMROT_TIMCTRLn_RELOAD, - mxs_timrot_base + HW_TIMROT_TIMCTRLn(1)); - - /* set clocksource timer fixed count to the maximum */ - if (timrot_is_v1()) - __raw_writel(0xffff, - mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1)); - else - __raw_writel(0xffffffff, - mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1)); - - /* init and register the timer to the framework */ - mxs_clocksource_init(timer_clk); - mxs_clockevent_init(timer_clk); - - /* Make irqs happen */ - irq = irq_of_parse_and_map(np, 0); - setup_irq(irq, &mxs_timer_irq); -} diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 903da8e..cdd05f2 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -55,12 +55,6 @@ config MACH_OMAP_H3 TI OMAP 1710 H3 board support. Say Y here if you have such a board. -config MACH_OMAP_HTCWIZARD - bool "HTC Wizard" - depends on ARCH_OMAP850 - help - HTC Wizard smartphone support (AKA QTEK 9100, ...) - config MACH_HERALD bool "HTC Herald" depends on ARCH_OMAP850 diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 8111cd9..b9c0ed3 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -408,7 +408,7 @@ config OMAP3_SDRC_AC_TIMING config OMAP4_ERRATA_I688 bool "OMAP4 errata: Async Bridge Corruption" - depends on ARCH_OMAP4 && !ARCH_MULTIPLATFORM + depends on (ARCH_OMAP4 || SOC_OMAP5) && !ARCH_MULTIPLATFORM select ARCH_HAS_BARRIERS help If a data is stalled inside asynchronous bridge because of back diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index a3e0aaa..cb0596b 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -166,7 +166,7 @@ static void __init sdp2430_display_init(void) omap_display_init(&sdp2430_dss_data); } -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) static struct omap_smc91x_platform_data board_smc91x_data = { .cs = 5, diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 812c829..5b4ec51 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -246,7 +246,7 @@ static u32 is_gpmc_muxed(void) return 0; } -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) static struct omap_smc91x_platform_data board_smc91x_data = { .cs = 1, diff --git a/arch/arm/mach-omap2/cclock33xx_data.c b/arch/arm/mach-omap2/cclock33xx_data.c index 476b820..7f091c8 100644 --- a/arch/arm/mach-omap2/cclock33xx_data.c +++ b/arch/arm/mach-omap2/cclock33xx_data.c @@ -958,6 +958,14 @@ int __init am33xx_clk_init(void) clk_set_parent(&timer3_fck, &sys_clkin_ck); clk_set_parent(&timer6_fck, &sys_clkin_ck); + /* + * The On-Chip 32K RC Osc clock is not an accurate clock-source as per + * the design/spec, so as a result, for example, timer which supposed + * to get expired @60Sec, but will expire somewhere ~@40Sec, which is + * not expected by any use-case, so change WDT1 clock source to PRCM + * 32KHz clock. + */ + clk_set_parent(&wdt1_fck, &clkdiv32k_ick); return 0; } diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index 3aed4b0..3a0296c 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -307,10 +307,10 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel) _omap3_noncore_dpll_bypass(clk); /* - * Set jitter correction. No jitter correction for OMAP4 and 3630 - * since freqsel field is no longer present + * Set jitter correction. Jitter correction applicable for OMAP343X + * only since freqsel field is no longer present on other devices. */ - if (!soc_is_am33xx() && !cpu_is_omap44xx() && !cpu_is_omap3630()) { + if (cpu_is_omap343x()) { v = __raw_readl(dd->control_reg); v &= ~dd->freqsel_mask; v |= freqsel << __ffs(dd->freqsel_mask); @@ -480,29 +480,30 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, if (!dd) return -EINVAL; - __clk_prepare(dd->clk_bypass); - clk_enable(dd->clk_bypass); - __clk_prepare(dd->clk_ref); - clk_enable(dd->clk_ref); - if (__clk_get_rate(dd->clk_bypass) == rate && (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) { pr_debug("%s: %s: set rate: entering bypass.\n", __func__, __clk_get_name(hw->clk)); + __clk_prepare(dd->clk_bypass); + clk_enable(dd->clk_bypass); ret = _omap3_noncore_dpll_bypass(clk); if (!ret) new_parent = dd->clk_bypass; + clk_disable(dd->clk_bypass); + __clk_unprepare(dd->clk_bypass); } else { + __clk_prepare(dd->clk_ref); + clk_enable(dd->clk_ref); + if (dd->last_rounded_rate != rate) rate = __clk_round_rate(hw->clk, rate); if (dd->last_rounded_rate == 0) return -EINVAL; - /* No freqsel on AM335x, OMAP4 and OMAP3630 */ - if (!soc_is_am33xx() && !cpu_is_omap44xx() && - !cpu_is_omap3630()) { + /* Freqsel is available only on OMAP343X devices */ + if (cpu_is_omap343x()) { freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n); WARN_ON(!freqsel); @@ -514,6 +515,8 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, ret = omap3_noncore_dpll_program(clk, freqsel); if (!ret) new_parent = dd->clk_ref; + clk_disable(dd->clk_ref); + __clk_unprepare(dd->clk_ref); } /* * FIXME - this is all wrong. common code handles reparenting and @@ -525,11 +528,6 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, if (!ret) __clk_reparent(hw->clk, new_parent); - clk_disable(dd->clk_ref); - __clk_unprepare(dd->clk_ref); - clk_disable(dd->clk_bypass); - __clk_unprepare(dd->clk_bypass); - return 0; } diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c index b155500..b8208b4 100644 --- a/arch/arm/mach-omap2/dsp.c +++ b/arch/arm/mach-omap2/dsp.c @@ -26,7 +26,7 @@ #include "control.h" #include "cm2xxx_3xxx.h" #include "prm2xxx_3xxx.h" -#ifdef CONFIG_BRIDGE_DVFS +#ifdef CONFIG_TIDSPBRIDGE_DVFS #include "omap-pm.h" #endif @@ -35,7 +35,7 @@ static struct platform_device *omap_dsp_pdev; static struct omap_dsp_platform_data omap_dsp_pdata __initdata = { -#ifdef CONFIG_BRIDGE_DVFS +#ifdef CONFIG_TIDSPBRIDGE_DVFS .dsp_set_min_opp = omap_pm_dsp_set_min_opp, .dsp_get_opp = omap_pm_dsp_get_opp, .cpu_set_freq = omap_pm_cpu_set_freq, diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 8a68f1e..ff0bc9e 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -529,22 +529,28 @@ void __init omap5xxx_check_revision(void) case 0xb942: switch (rev) { case 0: - default: omap_revision = OMAP5430_REV_ES1_0; + break; + case 1: + default: + omap_revision = OMAP5430_REV_ES2_0; } break; case 0xb998: switch (rev) { case 0: - default: omap_revision = OMAP5432_REV_ES1_0; + break; + case 1: + default: + omap_revision = OMAP5432_REV_ES2_0; } break; default: /* Unknown default to latest silicon rev as default*/ - omap_revision = OMAP5430_REV_ES1_0; + omap_revision = OMAP5430_REV_ES2_0; } pr_info("OMAP%04x ES%d.0\n", diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 2c3fdd6..2bef5a7 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -271,6 +271,14 @@ static struct map_desc omap54xx_io_desc[] __initdata = { .length = L4_PER_54XX_SIZE, .type = MT_DEVICE, }, +#ifdef CONFIG_OMAP4_ERRATA_I688 + { + .virtual = OMAP4_SRAM_VA, + .pfn = __phys_to_pfn(OMAP4_SRAM_PA), + .length = PAGE_SIZE, + .type = MT_MEMORY_SO, + }, +#endif }; #endif @@ -323,6 +331,7 @@ void __init omap4_map_io(void) void __init omap5_map_io(void) { iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc)); + omap_barriers_init(); } #endif /* diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 708bb11..2aeb928 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -240,15 +240,21 @@ void __iomem *omap4_get_sar_ram_base(void) */ static int __init omap4_sar_ram_init(void) { + unsigned long sar_base; + /* * To avoid code running on other OMAPs in * multi-omap builds */ - if (!cpu_is_omap44xx()) + if (cpu_is_omap44xx()) + sar_base = OMAP44XX_SAR_RAM_BASE; + else if (soc_is_omap54xx()) + sar_base = OMAP54XX_SAR_RAM_BASE; + else return -ENOMEM; /* Static mapping, never released */ - sar_ram_base = ioremap(OMAP44XX_SAR_RAM_BASE, SZ_16K); + sar_ram_base = ioremap(sar_base, SZ_16K); if (WARN_ON(!sar_ram_base)) return -ENOMEM; diff --git a/arch/arm/mach-omap2/omap4-sar-layout.h b/arch/arm/mach-omap2/omap4-sar-layout.h index e170fe8..9374175 100644 --- a/arch/arm/mach-omap2/omap4-sar-layout.h +++ b/arch/arm/mach-omap2/omap4-sar-layout.h @@ -48,13 +48,13 @@ #define SAR_BACKUP_STATUS_WAKEUPGEN 0x10 /* WakeUpGen save restore offset from OMAP54XX_SAR_RAM_BASE */ -#define OMAP5_WAKEUPGENENB_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x8d4) -#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x8e8) -#define OMAP5_WAKEUPGENENB_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0x8fc) -#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0x910) -#define OMAP5_AUXCOREBOOT0_OFFSET (SAR_BANK3_OFFSET + 0x924) -#define OMAP5_AUXCOREBOOT1_OFFSET (SAR_BANK3_OFFSET + 0x928) -#define OMAP5_AMBA_IF_MODE_OFFSET (SAR_BANK3_OFFSET + 0x92c) +#define OMAP5_WAKEUPGENENB_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x9dc) +#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x9f0) +#define OMAP5_WAKEUPGENENB_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0xa04) +#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0xa18) +#define OMAP5_AUXCOREBOOT0_OFFSET (SAR_BANK3_OFFSET + 0xa2c) +#define OMAP5_AUXCOREBOOT1_OFFSET (SAR_BANK3_OFFSET + 0x930) +#define OMAP5_AMBA_IF_MODE_OFFSET (SAR_BANK3_OFFSET + 0xa34) #define OMAP5_SAR_BACKUP_STATUS_OFFSET (SAR_BANK3_OFFSET + 0x800) #endif diff --git a/arch/arm/mach-omap2/omap54xx.h b/arch/arm/mach-omap2/omap54xx.h index a2582bb..a086ba1 100644 --- a/arch/arm/mach-omap2/omap54xx.h +++ b/arch/arm/mach-omap2/omap54xx.h @@ -28,5 +28,6 @@ #define OMAP54XX_PRCM_MPU_BASE 0x48243000 #define OMAP54XX_SCM_BASE 0x4a002000 #define OMAP54XX_CTRL_BASE 0x4a002800 +#define OMAP54XX_SAR_RAM_BASE 0x4ae26000 #endif /* __ASM_SOC_OMAP555554XX_H */ diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index c2c798c..e5cafed 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -610,8 +610,6 @@ static int _enable_wakeup(struct omap_hwmod *oh, u32 *v) /* XXX test pwrdm_get_wken for this hwmod's subsystem */ - oh->_int_flags |= _HWMOD_WAKEUP_ENABLED; - return 0; } @@ -645,8 +643,6 @@ static int _disable_wakeup(struct omap_hwmod *oh, u32 *v) /* XXX test pwrdm_get_wken for this hwmod's subsystem */ - oh->_int_flags &= ~_HWMOD_WAKEUP_ENABLED; - return 0; } diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index d43d9b6..28f4dea 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -477,15 +477,13 @@ struct omap_hwmod_omap4_prcm { * These are for internal use only and are managed by the omap_hwmod code. * * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module - * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached * _HWMOD_SKIP_ENABLE: set if hwmod enabled during init (HWMOD_INIT_NO_IDLE) - * causes the first call to _enable() to only update the pinmux */ #define _HWMOD_NO_MPU_PORT (1 << 0) -#define _HWMOD_WAKEUP_ENABLED (1 << 1) -#define _HWMOD_SYSCONFIG_LOADED (1 << 2) -#define _HWMOD_SKIP_ENABLE (1 << 3) +#define _HWMOD_SYSCONFIG_LOADED (1 << 1) +#define _HWMOD_SKIP_ENABLE (1 << 2) /* * omap_hwmod._state definitions diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 26eee4a..31bea1c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -28,6 +28,7 @@ #include "prm-regbits-33xx.h" #include "i2c.h" #include "mmc.h" +#include "wd_timer.h" /* * IP blocks @@ -2087,8 +2088,21 @@ static struct omap_hwmod am33xx_uart6_hwmod = { }; /* 'wd_timer' class */ +static struct omap_hwmod_class_sysconfig wdt_sysc = { + .rev_offs = 0x0, + .sysc_offs = 0x10, + .syss_offs = 0x14, + .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + static struct omap_hwmod_class am33xx_wd_timer_hwmod_class = { .name = "wd_timer", + .sysc = &wdt_sysc, + .pre_shutdown = &omap2_wd_timer_disable, }; /* @@ -2099,6 +2113,7 @@ static struct omap_hwmod am33xx_wd_timer1_hwmod = { .name = "wd_timer2", .class = &am33xx_wd_timer_hwmod_class, .clkdm_name = "l4_wkup_clkdm", + .flags = HWMOD_SWSUP_SIDLE, .main_clk = "wdt1_fck", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 8e61d80..89cad4a 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -52,7 +52,6 @@ enum { #define ALREADYACTIVE_SWITCH 0 #define FORCEWAKEUP_SWITCH 1 #define LOWPOWERSTATE_SWITCH 2 -#define ERROR_SWITCH 3 /* pwrdm_list contains all registered struct powerdomains */ static LIST_HEAD(pwrdm_list); @@ -233,10 +232,7 @@ static u8 _pwrdm_save_clkdm_state_and_activate(struct powerdomain *pwrdm, { u8 sleep_switch; - if (curr_pwrst < 0) { - WARN_ON(1); - sleep_switch = ERROR_SWITCH; - } else if (curr_pwrst < PWRDM_POWER_ON) { + if (curr_pwrst < PWRDM_POWER_ON) { if (curr_pwrst > pwrst && pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE && arch_pwrdm->pwrdm_set_lowpwrstchange) { @@ -1091,7 +1087,8 @@ int pwrdm_post_transition(struct powerdomain *pwrdm) */ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst) { - u8 curr_pwrst, next_pwrst, sleep_switch; + u8 next_pwrst, sleep_switch; + int curr_pwrst; int ret = 0; bool hwsup = false; @@ -1107,16 +1104,17 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst) pwrdm_lock(pwrdm); curr_pwrst = pwrdm_read_pwrst(pwrdm); + if (curr_pwrst < 0) { + ret = -EINVAL; + goto osps_out; + } + next_pwrst = pwrdm_read_next_pwrst(pwrdm); if (curr_pwrst == pwrst && next_pwrst == pwrst) goto osps_out; sleep_switch = _pwrdm_save_clkdm_state_and_activate(pwrdm, curr_pwrst, pwrst, &hwsup); - if (sleep_switch == ERROR_SWITCH) { - ret = -EINVAL; - goto osps_out; - } ret = pwrdm_set_next_pwrst(pwrdm, pwrst); if (ret) diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index d35f98a..415c7e0 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -81,13 +81,13 @@ static struct prm_reset_src_map omap44xx_prm_reset_src_map[] = { /* Read a register in a CM/PRM instance in the PRM module */ u32 omap4_prm_read_inst_reg(s16 inst, u16 reg) { - return __raw_readl(OMAP44XX_PRM_REGADDR(inst, reg)); + return __raw_readl(prm_base + inst + reg); } /* Write into a register in a CM/PRM instance in the PRM module */ void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 reg) { - __raw_writel(val, OMAP44XX_PRM_REGADDR(inst, reg)); + __raw_writel(val, prm_base + inst + reg); } /* Read-modify-write a register in a PRM module. Caller must lock */ @@ -650,7 +650,7 @@ static struct prm_ll_data omap44xx_prm_ll_data = { int __init omap44xx_prm_init(void) { - if (!cpu_is_omap44xx()) + if (!cpu_is_omap44xx() && !soc_is_omap54xx()) return 0; return prm_register(&omap44xx_prm_ll_data); diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index c62116b..18fdeeb 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -413,7 +413,9 @@ IS_OMAP_TYPE(3430, 0x3430) #define OMAP54XX_CLASS 0x54000054 #define OMAP5430_REV_ES1_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8)) +#define OMAP5430_REV_ES2_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x20 << 8)) #define OMAP5432_REV_ES1_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8)) +#define OMAP5432_REV_ES2_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x20 << 8)) void omap2xxx_check_revision(void); void omap3xxx_check_revision(void); diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 2bdd4cf..32c26e4 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -62,6 +62,7 @@ #define OMAP2_MPU_SOURCE "sys_ck" #define OMAP3_MPU_SOURCE OMAP2_MPU_SOURCE #define OMAP4_MPU_SOURCE "sys_clkin_ck" +#define OMAP5_MPU_SOURCE "sys_clkin" #define OMAP2_32K_SOURCE "func_32k_ck" #define OMAP3_32K_SOURCE "omap_32k_fck" #define OMAP4_32K_SOURCE "sys_32k_ck" @@ -487,7 +488,7 @@ static void __init realtime_counter_init(void) pr_err("%s: ioremap failed\n", __func__); return; } - sys_clk = clk_get(NULL, "sys_clkin_ck"); + sys_clk = clk_get(NULL, OMAP5_MPU_SOURCE); if (IS_ERR(sys_clk)) { pr_err("%s: failed to get system clock handle\n", __func__); iounmap(base); @@ -597,7 +598,7 @@ void __init omap4_local_timer_init(void) int err; if (of_have_populated_dt()) { - twd_local_timer_of_register(); + clocksource_of_init(); return; } @@ -616,7 +617,7 @@ void __init omap4_local_timer_init(void) #ifdef CONFIG_SOC_OMAP5 OMAP_SYS_32K_TIMER_INIT(5, 1, OMAP4_32K_SOURCE, "ti,timer-alwon", - 2, OMAP4_MPU_SOURCE); + 2, OMAP5_MPU_SOURCE); void __init omap5_realtime_timer_init(void) { int err; diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index fcdf52d..f051f53 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -214,11 +214,6 @@ static struct clk clk_pcmcdclk2 = { .name = "pcmcdclk", }; -static struct clk dummy_apb_pclk = { - .name = "apb_pclk", - .id = -1, -}; - static struct clk *clkset_vpllsrc_list[] = { [0] = &clk_fin_vpll, [1] = &clk_sclk_hdmi27m, @@ -305,18 +300,6 @@ static struct clk_ops clk_fout_apll_ops = { static struct clk init_clocks_off[] = { { - .name = "dma", - .devname = "dma-pl330.0", - .parent = &clk_hclk_psys.clk, - .enable = s5pv210_clk_ip0_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "dma", - .devname = "dma-pl330.1", - .parent = &clk_hclk_psys.clk, - .enable = s5pv210_clk_ip0_ctrl, - .ctrlbit = (1 << 4), - }, { .name = "rot", .parent = &clk_hclk_dsys.clk, .enable = s5pv210_clk_ip0_ctrl, @@ -573,6 +556,20 @@ static struct clk clk_hsmmc3 = { .ctrlbit = (1<<19), }; +static struct clk clk_pdma0 = { + .name = "pdma0", + .parent = &clk_hclk_psys.clk, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 3), +}; + +static struct clk clk_pdma1 = { + .name = "pdma1", + .parent = &clk_hclk_psys.clk, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 4), +}; + static struct clk *clkset_uart_list[] = { [6] = &clk_mout_mpll.clk, [7] = &clk_mout_epll.clk, @@ -1075,6 +1072,8 @@ static struct clk *clk_cdev[] = { &clk_hsmmc1, &clk_hsmmc2, &clk_hsmmc3, + &clk_pdma0, + &clk_pdma1, }; /* Clock initialisation code */ @@ -1333,6 +1332,8 @@ static struct clk_lookup s5pv210_clk_lookup[] = { CLKDEV_INIT(NULL, "spi_busclk0", &clk_p), CLKDEV_INIT("s5pv210-spi.0", "spi_busclk1", &clk_sclk_spi0.clk), CLKDEV_INIT("s5pv210-spi.1", "spi_busclk1", &clk_sclk_spi1.clk), + CLKDEV_INIT("dma-pl330.0", "apb_pclk", &clk_pdma0), + CLKDEV_INIT("dma-pl330.1", "apb_pclk", &clk_pdma1), }; void __init s5pv210_register_clocks(void) @@ -1361,6 +1362,5 @@ void __init s5pv210_register_clocks(void) for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++) s3c_disable_clocks(clk_cdev[ptr], 1); - s3c24xx_register_clock(&dummy_apb_pclk); s3c_pwmclk_init(); } diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 3a38f7b..e373de4 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -845,7 +845,7 @@ static struct fimc_source_info goni_camera_sensors[] = { .mux_id = 0, .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | V4L2_MBUS_VSYNC_ACTIVE_LOW, - .bus_type = FIMC_BUS_TYPE_ITU_601, + .fimc_bus_type = FIMC_BUS_TYPE_ITU_601, .board_info = &noon010pc30_board_info, .i2c_bus_num = 0, .clk_frequency = 16000000UL, diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index cdcb799..fec49eb 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -32,6 +32,7 @@ #include <linux/smsc911x.h> #include <linux/spi/spi.h> #include <linux/spi/sh_hspi.h> +#include <linux/mmc/host.h> #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mfd/tmio.h> #include <linux/usb/otg.h> diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear13xx/spear13xx.c index c7d2b4a..25a1019 100644 --- a/arch/arm/mach-spear13xx/spear13xx.c +++ b/arch/arm/mach-spear13xx/spear13xx.c @@ -15,12 +15,12 @@ #include <linux/amba/pl022.h> #include <linux/clk.h> +#include <linux/clocksource.h> #include <linux/dw_dmac.h> #include <linux/err.h> #include <linux/of.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/map.h> -#include <asm/smp_twd.h> #include <mach/dma.h> #include <mach/generic.h> #include <mach/spear.h> @@ -179,5 +179,5 @@ void __init spear13xx_timer_init(void) clk_put(pclk); spear_setup_of_timer(); - twd_local_timer_of_register(); + clocksource_of_init(); } diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index f6b46ae..e40326d 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -10,6 +10,7 @@ obj-y += pm.o obj-y += reset.o obj-y += reset-handler.o obj-y += sleep.o +obj-y += tegra.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_speedo.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o @@ -27,9 +28,7 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o obj-$(CONFIG_TEGRA_PCI) += pcie.o -obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-dt-tegra20.o -obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o -obj-$(CONFIG_ARCH_TEGRA_114_SOC) += board-dt-tegra114.o +obj-$(CONFIG_ARCH_TEGRA_114_SOC) += tegra114_speedo.o ifeq ($(CONFIG_CPU_IDLE),y) obj-$(CONFIG_ARCH_TEGRA_114_SOC) += cpuidle-tegra114.o endif diff --git a/arch/arm/mach-tegra/board-dt-tegra114.c b/arch/arm/mach-tegra/board-dt-tegra114.c deleted file mode 100644 index 085d636..0000000 --- a/arch/arm/mach-tegra/board-dt-tegra114.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * NVIDIA Tegra114 device tree board support - * - * Copyright (C) 2013 NVIDIA Corporation - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/of.h> -#include <linux/of_platform.h> -#include <linux/clocksource.h> - -#include <asm/mach/arch.h> - -#include "board.h" -#include "common.h" - -static void __init tegra114_dt_init(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - -static const char * const tegra114_dt_board_compat[] = { - "nvidia,tegra114", - NULL, -}; - -DT_MACHINE_START(TEGRA114_DT, "NVIDIA Tegra114 (Flattened Device Tree)") - .smp = smp_ops(tegra_smp_ops), - .map_io = tegra_map_common_io, - .init_early = tegra114_init_early, - .init_irq = tegra_dt_init_irq, - .init_time = clocksource_of_init, - .init_machine = tegra114_dt_init, - .init_late = tegra_init_late, - .restart = tegra_assert_system_reset, - .dt_compat = tegra114_dt_board_compat, -MACHINE_END diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c deleted file mode 100644 index bf68567..0000000 --- a/arch/arm/mach-tegra/board-dt-tegra30.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * arch/arm/mach-tegra/board-dt-tegra30.c - * - * NVIDIA Tegra30 device tree board support - * - * Copyright (C) 2011 NVIDIA Corporation - * - * Derived from: - * - * arch/arm/mach-tegra/board-dt-tegra20.c - * - * Copyright (C) 2010 Secret Lab Technologies, Ltd. - * Copyright (C) 2010 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/clocksource.h> -#include <linux/kernel.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_fdt.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> - -#include <asm/mach/arch.h> - -#include "board.h" -#include "common.h" -#include "iomap.h" - -static void __init tegra30_dt_init(void) -{ - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} - -static const char *tegra30_dt_board_compat[] = { - "nvidia,tegra30", - NULL -}; - -DT_MACHINE_START(TEGRA30_DT, "NVIDIA Tegra30 (Flattened Device Tree)") - .smp = smp_ops(tegra_smp_ops), - .map_io = tegra_map_common_io, - .init_early = tegra30_init_early, - .init_irq = tegra_dt_init_irq, - .init_time = clocksource_of_init, - .init_machine = tegra30_dt_init, - .init_late = tegra_init_late, - .restart = tegra_assert_system_reset, - .dt_compat = tegra30_dt_board_compat, -MACHINE_END diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c index 3cdc1bb..d195db0 100644 --- a/arch/arm/mach-tegra/board-harmony-pcie.c +++ b/arch/arm/mach-tegra/board-harmony-pcie.c @@ -62,7 +62,11 @@ int __init harmony_pcie_init(void) goto err_reg; } - regulator_enable(regulator); + err = regulator_enable(regulator); + if (err) { + pr_err("%s: regulator_enable failed: %d\n", __func__, err); + goto err_en; + } err = tegra_pcie_init(true, true); if (err) { @@ -74,6 +78,7 @@ int __init harmony_pcie_init(void) err_pcie: regulator_disable(regulator); +err_en: regulator_put(regulator); err_reg: gpio_free(en_vdd_1v05); diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h index 86851c8..60431de 100644 --- a/arch/arm/mach-tegra/board.h +++ b/arch/arm/mach-tegra/board.h @@ -26,9 +26,7 @@ void tegra_assert_system_reset(char mode, const char *cmd); -void __init tegra20_init_early(void); -void __init tegra30_init_early(void); -void __init tegra114_init_early(void); +void __init tegra_init_early(void); void __init tegra_map_common_io(void); void __init tegra_init_irq(void); void __init tegra_dt_init_irq(void); diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index 5449a3f..eb1f3c8 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -33,6 +33,7 @@ #include "common.h" #include "fuse.h" #include "iomap.h" +#include "irq.h" #include "pmc.h" #include "apbio.h" #include "sleep.h" @@ -61,8 +62,10 @@ u32 tegra_uart_config[4] = { void __init tegra_dt_init_irq(void) { tegra_clocks_init(); + tegra_pmc_init(); tegra_init_irq(); irqchip_init(); + tegra_legacy_irq_syscore_init(); } #endif @@ -94,40 +97,18 @@ static void __init tegra_init_cache(void) } -static void __init tegra_init_early(void) +void __init tegra_init_early(void) { tegra_cpu_reset_handler_init(); tegra_apb_io_init(); tegra_init_fuse(); tegra_init_cache(); - tegra_pmc_init(); tegra_powergate_init(); + tegra_hotplug_init(); } -#ifdef CONFIG_ARCH_TEGRA_2x_SOC -void __init tegra20_init_early(void) -{ - tegra_init_early(); - tegra20_hotplug_init(); -} -#endif - -#ifdef CONFIG_ARCH_TEGRA_3x_SOC -void __init tegra30_init_early(void) -{ - tegra_init_early(); - tegra30_hotplug_init(); -} -#endif - -#ifdef CONFIG_ARCH_TEGRA_114_SOC -void __init tegra114_init_early(void) -{ - tegra_init_early(); -} -#endif - void __init tegra_init_late(void) { + tegra_init_suspend(); tegra_powergate_debugfs_init(); } diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c index 825ced4..8bbbdeb 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra20.c +++ b/arch/arm/mach-tegra/cpuidle-tegra20.c @@ -130,10 +130,6 @@ static bool tegra20_cpu_cluster_power_down(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - struct cpuidle_state *state = &drv->states[index]; - u32 cpu_on_time = state->exit_latency; - u32 cpu_off_time = state->target_residency - state->exit_latency; - while (tegra20_cpu_is_resettable_soon()) cpu_relax(); @@ -142,7 +138,7 @@ static bool tegra20_cpu_cluster_power_down(struct cpuidle_device *dev, clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu); - tegra_idle_lp2_last(cpu_on_time, cpu_off_time); + tegra_idle_lp2_last(); clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu); diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c index 8b50cf4..c0931c8 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra30.c +++ b/arch/arm/mach-tegra/cpuidle-tegra30.c @@ -72,10 +72,6 @@ static bool tegra30_cpu_cluster_power_down(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - struct cpuidle_state *state = &drv->states[index]; - u32 cpu_on_time = state->exit_latency; - u32 cpu_off_time = state->target_residency - state->exit_latency; - /* All CPUs entering LP2 is not working. * Don't let CPU0 enter LP2 when any secondary CPU is online. */ @@ -86,7 +82,7 @@ static bool tegra30_cpu_cluster_power_down(struct cpuidle_device *dev, clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu); - tegra_idle_lp2_last(cpu_on_time, cpu_off_time); + tegra_idle_lp2_last(); clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu); @@ -102,12 +98,8 @@ static bool tegra30_cpu_core_power_down(struct cpuidle_device *dev, smp_wmb(); - save_cpu_arch_register(); - cpu_suspend(0, tegra30_sleep_cpu_secondary_finish); - restore_cpu_arch_register(); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu); return true; diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c index f7db078..e035cd2 100644 --- a/arch/arm/mach-tegra/fuse.c +++ b/arch/arm/mach-tegra/fuse.c @@ -2,6 +2,7 @@ * arch/arm/mach-tegra/fuse.c * * Copyright (C) 2010 Google, Inc. + * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved. * * Author: * Colin Cross <ccross@android.com> @@ -137,6 +138,9 @@ void tegra_init_fuse(void) tegra_fuse_spare_bit = TEGRA30_FUSE_SPARE_BIT; tegra_init_speedo_data = &tegra30_init_speedo_data; break; + case TEGRA114: + tegra_init_speedo_data = &tegra114_init_speedo_data; + break; default: pr_warn("Tegra: unknown chip id %d\n", tegra_chip_id); tegra_fuse_spare_bit = TEGRA20_FUSE_SPARE_BIT; diff --git a/arch/arm/mach-tegra/fuse.h b/arch/arm/mach-tegra/fuse.h index da78434..aacc00d 100644 --- a/arch/arm/mach-tegra/fuse.h +++ b/arch/arm/mach-tegra/fuse.h @@ -1,5 +1,6 @@ /* * Copyright (C) 2010 Google, Inc. + * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved. * * Author: * Colin Cross <ccross@android.com> @@ -66,4 +67,10 @@ void tegra30_init_speedo_data(void); static inline void tegra30_init_speedo_data(void) {} #endif +#ifdef CONFIG_ARCH_TEGRA_114_SOC +void tegra114_init_speedo_data(void); +#else +static inline void tegra114_init_speedo_data(void) {} +#endif + #endif diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S index fd473f2..045c16f 100644 --- a/arch/arm/mach-tegra/headsmp.S +++ b/arch/arm/mach-tegra/headsmp.S @@ -7,8 +7,5 @@ ENTRY(tegra_secondary_startup) bl v7_invalidate_l1 - /* Enable coresight */ - mov32 r0, 0xC5ACCE55 - mcr p14, 0, r0, c7, c12, 6 b secondary_startup ENDPROC(tegra_secondary_startup) diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c index a599f6e..8da9f78 100644 --- a/arch/arm/mach-tegra/hotplug.c +++ b/arch/arm/mach-tegra/hotplug.c @@ -1,8 +1,7 @@ /* - * * Copyright (C) 2002 ARM Ltd. * All Rights Reserved - * Copyright (c) 2010, 2012 NVIDIA Corporation. All rights reserved. + * Copyright (c) 2010, 2012-2013, NVIDIA Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -15,6 +14,7 @@ #include <asm/cacheflush.h> #include <asm/smp_plat.h> +#include "fuse.h" #include "sleep.h" static void (*tegra_hotplug_shutdown)(void); @@ -56,18 +56,13 @@ int tegra_cpu_disable(unsigned int cpu) return cpu == 0 ? -EPERM : 0; } -#ifdef CONFIG_ARCH_TEGRA_2x_SOC -extern void tegra20_hotplug_shutdown(void); -void __init tegra20_hotplug_init(void) +void __init tegra_hotplug_init(void) { - tegra_hotplug_shutdown = tegra20_hotplug_shutdown; -} -#endif + if (!IS_ENABLED(CONFIG_HOTPLUG_CPU)) + return; -#ifdef CONFIG_ARCH_TEGRA_3x_SOC -extern void tegra30_hotplug_shutdown(void); -void __init tegra30_hotplug_init(void) -{ - tegra_hotplug_shutdown = tegra30_hotplug_shutdown; + if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && tegra_chip_id == TEGRA20) + tegra_hotplug_shutdown = tegra20_hotplug_shutdown; + if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) && tegra_chip_id == TEGRA30) + tegra_hotplug_shutdown = tegra30_hotplug_shutdown; } -#endif diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c index 1952e82..0de4eed 100644 --- a/arch/arm/mach-tegra/irq.c +++ b/arch/arm/mach-tegra/irq.c @@ -4,7 +4,7 @@ * Author: * Colin Cross <ccross@android.com> * - * Copyright (C) 2010, NVIDIA Corporation + * Copyright (C) 2010,2013, NVIDIA Corporation * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -23,6 +23,7 @@ #include <linux/io.h> #include <linux/of.h> #include <linux/irqchip/arm-gic.h> +#include <linux/syscore_ops.h> #include "board.h" #include "iomap.h" @@ -43,6 +44,7 @@ #define ICTLR_COP_IEP_CLASS 0x3c #define FIRST_LEGACY_IRQ 32 +#define TEGRA_MAX_NUM_ICTLRS 5 #define SGI_MASK 0xFFFF @@ -56,6 +58,15 @@ static void __iomem *ictlr_reg_base[] = { IO_ADDRESS(TEGRA_QUINARY_ICTLR_BASE), }; +#ifdef CONFIG_PM_SLEEP +static u32 cop_ier[TEGRA_MAX_NUM_ICTLRS]; +static u32 cop_iep[TEGRA_MAX_NUM_ICTLRS]; +static u32 cpu_ier[TEGRA_MAX_NUM_ICTLRS]; +static u32 cpu_iep[TEGRA_MAX_NUM_ICTLRS]; + +static u32 ictlr_wake_mask[TEGRA_MAX_NUM_ICTLRS]; +#endif + bool tegra_pending_sgi(void) { u32 pending_set; @@ -125,6 +136,87 @@ static int tegra_retrigger(struct irq_data *d) return 1; } +#ifdef CONFIG_PM_SLEEP +static int tegra_set_wake(struct irq_data *d, unsigned int enable) +{ + u32 irq = d->irq; + u32 index, mask; + + if (irq < FIRST_LEGACY_IRQ || + irq >= FIRST_LEGACY_IRQ + num_ictlrs * 32) + return -EINVAL; + + index = ((irq - FIRST_LEGACY_IRQ) / 32); + mask = BIT((irq - FIRST_LEGACY_IRQ) % 32); + if (enable) + ictlr_wake_mask[index] |= mask; + else + ictlr_wake_mask[index] &= ~mask; + + return 0; +} + +static int tegra_legacy_irq_suspend(void) +{ + unsigned long flags; + int i; + + local_irq_save(flags); + for (i = 0; i < num_ictlrs; i++) { + void __iomem *ictlr = ictlr_reg_base[i]; + /* Save interrupt state */ + cpu_ier[i] = readl_relaxed(ictlr + ICTLR_CPU_IER); + cpu_iep[i] = readl_relaxed(ictlr + ICTLR_CPU_IEP_CLASS); + cop_ier[i] = readl_relaxed(ictlr + ICTLR_COP_IER); + cop_iep[i] = readl_relaxed(ictlr + ICTLR_COP_IEP_CLASS); + + /* Disable COP interrupts */ + writel_relaxed(~0ul, ictlr + ICTLR_COP_IER_CLR); + + /* Disable CPU interrupts */ + writel_relaxed(~0ul, ictlr + ICTLR_CPU_IER_CLR); + + /* Enable the wakeup sources of ictlr */ + writel_relaxed(ictlr_wake_mask[i], ictlr + ICTLR_CPU_IER_SET); + } + local_irq_restore(flags); + + return 0; +} + +static void tegra_legacy_irq_resume(void) +{ + unsigned long flags; + int i; + + local_irq_save(flags); + for (i = 0; i < num_ictlrs; i++) { + void __iomem *ictlr = ictlr_reg_base[i]; + writel_relaxed(cpu_iep[i], ictlr + ICTLR_CPU_IEP_CLASS); + writel_relaxed(~0ul, ictlr + ICTLR_CPU_IER_CLR); + writel_relaxed(cpu_ier[i], ictlr + ICTLR_CPU_IER_SET); + writel_relaxed(cop_iep[i], ictlr + ICTLR_COP_IEP_CLASS); + writel_relaxed(~0ul, ictlr + ICTLR_COP_IER_CLR); + writel_relaxed(cop_ier[i], ictlr + ICTLR_COP_IER_SET); + } + local_irq_restore(flags); +} + +static struct syscore_ops tegra_legacy_irq_syscore_ops = { + .suspend = tegra_legacy_irq_suspend, + .resume = tegra_legacy_irq_resume, +}; + +int tegra_legacy_irq_syscore_init(void) +{ + register_syscore_ops(&tegra_legacy_irq_syscore_ops); + + return 0; +} +#else +#define tegra_set_wake NULL +#endif + void __init tegra_init_irq(void) { int i; @@ -150,6 +242,8 @@ void __init tegra_init_irq(void) gic_arch_extn.irq_mask = tegra_mask; gic_arch_extn.irq_unmask = tegra_unmask; gic_arch_extn.irq_retrigger = tegra_retrigger; + gic_arch_extn.irq_set_wake = tegra_set_wake; + gic_arch_extn.flags = IRQCHIP_MASK_ON_SUSPEND; /* * Check if there is a devicetree present, since the GIC will be diff --git a/arch/arm/mach-tegra/irq.h b/arch/arm/mach-tegra/irq.h index 5142649..bc05ce5 100644 --- a/arch/arm/mach-tegra/irq.h +++ b/arch/arm/mach-tegra/irq.h @@ -19,4 +19,10 @@ bool tegra_pending_sgi(void); +#ifdef CONFIG_PM_SLEEP +int tegra_legacy_irq_syscore_init(void); +#else +static inline int tegra_legacy_irq_syscore_init(void) { return 0; } +#endif + #endif diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index 2c6b3d5..516aab2 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -26,22 +26,16 @@ #include <asm/smp_scu.h> #include <asm/smp_plat.h> -#include <mach/powergate.h> - #include "fuse.h" #include "flowctrl.h" #include "reset.h" +#include "pmc.h" #include "common.h" #include "iomap.h" -extern void tegra_secondary_startup(void); - static cpumask_t tegra_cpu_init_mask; -#define EVP_CPU_RESET_VECTOR \ - (IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE) + 0x100) - static void __cpuinit tegra_secondary_init(unsigned int cpu) { /* @@ -54,25 +48,43 @@ static void __cpuinit tegra_secondary_init(unsigned int cpu) cpumask_set_cpu(cpu, &tegra_cpu_init_mask); } -static int tegra20_power_up_cpu(unsigned int cpu) + +static int tegra20_boot_secondary(unsigned int cpu, struct task_struct *idle) { - /* Enable the CPU clock. */ - tegra_enable_cpu_clock(cpu); + cpu = cpu_logical_map(cpu); + + /* + * Force the CPU into reset. The CPU must remain in reset when + * the flow controller state is cleared (which will cause the + * flow controller to stop driving reset if the CPU has been + * power-gated via the flow controller). This will have no + * effect on first boot of the CPU since it should already be + * in reset. + */ + tegra_put_cpu_in_reset(cpu); - /* Clear flow controller CSR. */ - flowctrl_write_cpu_csr(cpu, 0); + /* + * Unhalt the CPU. If the flow controller was used to + * power-gate the CPU this will cause the flow controller to + * stop driving reset. The CPU will remain in reset because the + * clock and reset block is now driving reset. + */ + flowctrl_write_cpu_halt(cpu, 0); + tegra_enable_cpu_clock(cpu); + flowctrl_write_cpu_csr(cpu, 0); /* Clear flow controller CSR. */ + tegra_cpu_out_of_reset(cpu); return 0; } -static int tegra30_power_up_cpu(unsigned int cpu) +static int tegra30_boot_secondary(unsigned int cpu, struct task_struct *idle) { - int ret, pwrgateid; + int ret; unsigned long timeout; - pwrgateid = tegra_cpu_powergate_id(cpu); - if (pwrgateid < 0) - return pwrgateid; + cpu = cpu_logical_map(cpu); + tegra_put_cpu_in_reset(cpu); + flowctrl_write_cpu_halt(cpu, 0); /* * The power up sequence of cold boot CPU and warm boot CPU @@ -85,13 +97,13 @@ static int tegra30_power_up_cpu(unsigned int cpu) * the IO clamps. * For cold boot CPU, do not wait. After the cold boot CPU be * booted, it will run to tegra_secondary_init() and set - * tegra_cpu_init_mask which influences what tegra30_power_up_cpu() + * tegra_cpu_init_mask which influences what tegra30_boot_secondary() * next time around. */ if (cpumask_test_cpu(cpu, &tegra_cpu_init_mask)) { timeout = jiffies + msecs_to_jiffies(50); do { - if (!tegra_powergate_is_powered(pwrgateid)) + if (tegra_pmc_cpu_is_powered(cpu)) goto remove_clamps; udelay(10); } while (time_before(jiffies, timeout)); @@ -103,14 +115,14 @@ static int tegra30_power_up_cpu(unsigned int cpu) * be un-gated by un-toggling the power gate register * manually. */ - if (!tegra_powergate_is_powered(pwrgateid)) { - ret = tegra_powergate_power_on(pwrgateid); + if (!tegra_pmc_cpu_is_powered(cpu)) { + ret = tegra_pmc_cpu_power_on(cpu); if (ret) return ret; /* Wait for the power to come up. */ timeout = jiffies + msecs_to_jiffies(100); - while (tegra_powergate_is_powered(pwrgateid)) { + while (tegra_pmc_cpu_is_powered(cpu)) { if (time_after(jiffies, timeout)) return -ETIMEDOUT; udelay(10); @@ -123,57 +135,34 @@ remove_clamps: udelay(10); /* Remove I/O clamps. */ - ret = tegra_powergate_remove_clamping(pwrgateid); - udelay(10); + ret = tegra_pmc_cpu_remove_clamping(cpu); + if (ret) + return ret; - /* Clear flow controller CSR. */ - flowctrl_write_cpu_csr(cpu, 0); + udelay(10); + flowctrl_write_cpu_csr(cpu, 0); /* Clear flow controller CSR. */ + tegra_cpu_out_of_reset(cpu); return 0; } -static int __cpuinit tegra_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int tegra114_boot_secondary(unsigned int cpu, struct task_struct *idle) { - int status; - cpu = cpu_logical_map(cpu); + return tegra_pmc_cpu_power_on(cpu); +} - /* - * Force the CPU into reset. The CPU must remain in reset when the - * flow controller state is cleared (which will cause the flow - * controller to stop driving reset if the CPU has been power-gated - * via the flow controller). This will have no effect on first boot - * of the CPU since it should already be in reset. - */ - tegra_put_cpu_in_reset(cpu); - - /* - * Unhalt the CPU. If the flow controller was used to power-gate the - * CPU this will cause the flow controller to stop driving reset. - * The CPU will remain in reset because the clock and reset block - * is now driving reset. - */ - flowctrl_write_cpu_halt(cpu, 0); - - switch (tegra_chip_id) { - case TEGRA20: - status = tegra20_power_up_cpu(cpu); - break; - case TEGRA30: - status = tegra30_power_up_cpu(cpu); - break; - default: - status = -EINVAL; - break; - } - - if (status) - goto done; - - /* Take the CPU out of reset. */ - tegra_cpu_out_of_reset(cpu); -done: - return status; +static int __cpuinit tegra_boot_secondary(unsigned int cpu, + struct task_struct *idle) +{ + if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && tegra_chip_id == TEGRA20) + return tegra20_boot_secondary(cpu, idle); + if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) && tegra_chip_id == TEGRA30) + return tegra30_boot_secondary(cpu, idle); + if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) && tegra_chip_id == TEGRA114) + return tegra114_boot_secondary(cpu, idle); + + return -EINVAL; } static void __init tegra_smp_prepare_cpus(unsigned int max_cpus) diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index 523604d..84d8742 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -22,7 +22,7 @@ #include <linux/cpumask.h> #include <linux/delay.h> #include <linux/cpu_pm.h> -#include <linux/clk.h> +#include <linux/suspend.h> #include <linux/err.h> #include <linux/clk/tegra.h> @@ -37,67 +37,14 @@ #include "reset.h" #include "flowctrl.h" #include "fuse.h" +#include "pmc.h" #include "sleep.h" - -#define TEGRA_POWER_CPU_PWRREQ_OE (1 << 16) /* CPU pwr req enable */ - -#define PMC_CTRL 0x0 -#define PMC_CPUPWRGOOD_TIMER 0xc8 -#define PMC_CPUPWROFF_TIMER 0xcc +#include "pmc.h" #ifdef CONFIG_PM_SLEEP -static unsigned int g_diag_reg; static DEFINE_SPINLOCK(tegra_lp2_lock); -static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE); -static struct clk *tegra_pclk; void (*tegra_tear_down_cpu)(void); -void save_cpu_arch_register(void) -{ - /* read diagnostic register */ - asm("mrc p15, 0, %0, c15, c0, 1" : "=r"(g_diag_reg) : : "cc"); - return; -} - -void restore_cpu_arch_register(void) -{ - /* write diagnostic register */ - asm("mcr p15, 0, %0, c15, c0, 1" : : "r"(g_diag_reg) : "cc"); - return; -} - -static void set_power_timers(unsigned long us_on, unsigned long us_off) -{ - unsigned long long ticks; - unsigned long long pclk; - unsigned long rate; - static unsigned long tegra_last_pclk; - - if (tegra_pclk == NULL) { - tegra_pclk = clk_get_sys(NULL, "pclk"); - WARN_ON(IS_ERR(tegra_pclk)); - } - - rate = clk_get_rate(tegra_pclk); - - if (WARN_ON_ONCE(rate <= 0)) - pclk = 100000000; - else - pclk = rate; - - if ((rate != tegra_last_pclk)) { - ticks = (us_on * pclk) + 999999ull; - do_div(ticks, 1000000); - writel((unsigned long)ticks, pmc + PMC_CPUPWRGOOD_TIMER); - - ticks = (us_off * pclk) + 999999ull; - do_div(ticks, 1000000); - writel((unsigned long)ticks, pmc + PMC_CPUPWROFF_TIMER); - wmb(); - } - tegra_last_pclk = pclk; -} - /* * restore_cpu_complex * @@ -119,8 +66,6 @@ static void restore_cpu_complex(void) tegra_cpu_clock_resume(); flowctrl_cpu_suspend_exit(cpu); - - restore_cpu_arch_register(); } /* @@ -145,8 +90,6 @@ static void suspend_cpu_complex(void) tegra_cpu_clock_suspend(); flowctrl_cpu_suspend_enter(cpu); - - save_cpu_arch_register(); } void tegra_clear_cpu_in_lp2(int phy_cpu_id) @@ -197,16 +140,9 @@ static int tegra_sleep_cpu(unsigned long v2p) return 0; } -void tegra_idle_lp2_last(u32 cpu_on_time, u32 cpu_off_time) +void tegra_idle_lp2_last(void) { - u32 mode; - - /* Only the last cpu down does the final suspend steps */ - mode = readl(pmc + PMC_CTRL); - mode |= TEGRA_POWER_CPU_PWRREQ_OE; - writel(mode, pmc + PMC_CTRL); - - set_power_timers(cpu_on_time, cpu_off_time); + tegra_pmc_pm_set(TEGRA_SUSPEND_LP2); cpu_cluster_pm_enter(); suspend_cpu_complex(); @@ -216,4 +152,81 @@ void tegra_idle_lp2_last(u32 cpu_on_time, u32 cpu_off_time) restore_cpu_complex(); cpu_cluster_pm_exit(); } + +enum tegra_suspend_mode tegra_pm_validate_suspend_mode( + enum tegra_suspend_mode mode) +{ + /* Tegra114 didn't support any suspending mode yet. */ + if (tegra_chip_id == TEGRA114) + return TEGRA_SUSPEND_NONE; + + /* + * The Tegra devices only support suspending to LP2 currently. + */ + if (mode > TEGRA_SUSPEND_LP2) + return TEGRA_SUSPEND_LP2; + + return mode; +} + +static const char *lp_state[TEGRA_MAX_SUSPEND_MODE] = { + [TEGRA_SUSPEND_NONE] = "none", + [TEGRA_SUSPEND_LP2] = "LP2", + [TEGRA_SUSPEND_LP1] = "LP1", + [TEGRA_SUSPEND_LP0] = "LP0", +}; + +static int __cpuinit tegra_suspend_enter(suspend_state_t state) +{ + enum tegra_suspend_mode mode = tegra_pmc_get_suspend_mode(); + + if (WARN_ON(mode < TEGRA_SUSPEND_NONE || + mode >= TEGRA_MAX_SUSPEND_MODE)) + return -EINVAL; + + pr_info("Entering suspend state %s\n", lp_state[mode]); + + tegra_pmc_pm_set(mode); + + local_fiq_disable(); + + suspend_cpu_complex(); + switch (mode) { + case TEGRA_SUSPEND_LP2: + tegra_set_cpu_in_lp2(0); + break; + default: + break; + } + + cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu); + + switch (mode) { + case TEGRA_SUSPEND_LP2: + tegra_clear_cpu_in_lp2(0); + break; + default: + break; + } + restore_cpu_complex(); + + local_fiq_enable(); + + return 0; +} + +static const struct platform_suspend_ops tegra_suspend_ops = { + .valid = suspend_valid_only_mem, + .enter = tegra_suspend_enter, +}; + +void __init tegra_init_suspend(void) +{ + if (tegra_pmc_get_suspend_mode() == TEGRA_SUSPEND_NONE) + return; + + tegra_pmc_suspend_init(); + + suspend_set_ops(&tegra_suspend_ops); +} #endif diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h index 787335c..9d2d038 100644 --- a/arch/arm/mach-tegra/pm.h +++ b/arch/arm/mach-tegra/pm.h @@ -21,6 +21,8 @@ #ifndef _MACH_TEGRA_PM_H_ #define _MACH_TEGRA_PM_H_ +#include "pmc.h" + extern unsigned long l2x0_saved_regs_addr; void save_cpu_arch_register(void); @@ -29,7 +31,20 @@ void restore_cpu_arch_register(void); void tegra_clear_cpu_in_lp2(int phy_cpu_id); bool tegra_set_cpu_in_lp2(int phy_cpu_id); -void tegra_idle_lp2_last(u32 cpu_on_time, u32 cpu_off_time); +void tegra_idle_lp2_last(void); extern void (*tegra_tear_down_cpu)(void); +#ifdef CONFIG_PM_SLEEP +enum tegra_suspend_mode tegra_pm_validate_suspend_mode( + enum tegra_suspend_mode mode); +void tegra_init_suspend(void); +#else +enum tegra_suspend_mode tegra_pm_validate_suspend_mode( + enum tegra_suspend_mode mode) +{ + return TEGRA_SUSPEND_NONE; +} +static inline void tegra_init_suspend(void) {} +#endif + #endif /* _MACH_TEGRA_PM_H_ */ diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c index d4fdb5f..32360e5 100644 --- a/arch/arm/mach-tegra/pmc.c +++ b/arch/arm/mach-tegra/pmc.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved. + * Copyright (C) 2012,2013 NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -16,59 +16,313 @@ */ #include <linux/kernel.h> +#include <linux/clk.h> #include <linux/io.h> #include <linux/of.h> +#include <linux/of_address.h> -#include "iomap.h" +#include "fuse.h" +#include "pm.h" +#include "pmc.h" +#include "sleep.h" -#define PMC_CTRL 0x0 -#define PMC_CTRL_INTR_LOW (1 << 17) +#define TEGRA_POWER_EFFECT_LP0 (1 << 14) /* LP0 when CPU pwr gated */ +#define TEGRA_POWER_CPU_PWRREQ_POLARITY (1 << 15) /* CPU pwr req polarity */ +#define TEGRA_POWER_CPU_PWRREQ_OE (1 << 16) /* CPU pwr req enable */ + +#define PMC_CTRL 0x0 +#define PMC_CTRL_INTR_LOW (1 << 17) +#define PMC_PWRGATE_TOGGLE 0x30 +#define PMC_PWRGATE_TOGGLE_START (1 << 8) +#define PMC_REMOVE_CLAMPING 0x34 +#define PMC_PWRGATE_STATUS 0x38 + +#define PMC_CPUPWRGOOD_TIMER 0xc8 +#define PMC_CPUPWROFF_TIMER 0xcc + +#define TEGRA_POWERGATE_PCIE 3 +#define TEGRA_POWERGATE_VDEC 4 +#define TEGRA_POWERGATE_CPU1 9 +#define TEGRA_POWERGATE_CPU2 10 +#define TEGRA_POWERGATE_CPU3 11 + +static u8 tegra_cpu_domains[] = { + 0xFF, /* not available for CPU0 */ + TEGRA_POWERGATE_CPU1, + TEGRA_POWERGATE_CPU2, + TEGRA_POWERGATE_CPU3, +}; +static DEFINE_SPINLOCK(tegra_powergate_lock); + +static void __iomem *tegra_pmc_base; +static bool tegra_pmc_invert_interrupt; +static struct clk *tegra_pclk; + +struct pmc_pm_data { + u32 cpu_good_time; /* CPU power good time in uS */ + u32 cpu_off_time; /* CPU power off time in uS */ + u32 core_osc_time; /* Core power good osc time in uS */ + u32 core_pmu_time; /* Core power good pmu time in uS */ + u32 core_off_time; /* Core power off time in uS */ + bool corereq_high; /* Core power request active-high */ + bool sysclkreq_high; /* System clock request active-high */ + bool combined_req; /* Combined pwr req for CPU & Core */ + bool cpu_pwr_good_en; /* CPU power good signal is enabled */ + u32 lp0_vec_phy_addr; /* The phy addr of LP0 warm boot code */ + u32 lp0_vec_size; /* The size of LP0 warm boot code */ + enum tegra_suspend_mode suspend_mode; +}; +static struct pmc_pm_data pmc_pm_data; static inline u32 tegra_pmc_readl(u32 reg) { - return readl(IO_ADDRESS(TEGRA_PMC_BASE + reg)); + return readl(tegra_pmc_base + reg); } static inline void tegra_pmc_writel(u32 val, u32 reg) { - writel(val, IO_ADDRESS(TEGRA_PMC_BASE + reg)); + writel(val, tegra_pmc_base + reg); +} + +static int tegra_pmc_get_cpu_powerdomain_id(int cpuid) +{ + if (cpuid <= 0 || cpuid >= num_possible_cpus()) + return -EINVAL; + return tegra_cpu_domains[cpuid]; +} + +static bool tegra_pmc_powergate_is_powered(int id) +{ + return (tegra_pmc_readl(PMC_PWRGATE_STATUS) >> id) & 1; +} + +static int tegra_pmc_powergate_set(int id, bool new_state) +{ + bool old_state; + unsigned long flags; + + spin_lock_irqsave(&tegra_powergate_lock, flags); + + old_state = tegra_pmc_powergate_is_powered(id); + WARN_ON(old_state == new_state); + + tegra_pmc_writel(PMC_PWRGATE_TOGGLE_START | id, PMC_PWRGATE_TOGGLE); + + spin_unlock_irqrestore(&tegra_powergate_lock, flags); + + return 0; +} + +static int tegra_pmc_powergate_remove_clamping(int id) +{ + u32 mask; + + /* + * Tegra has a bug where PCIE and VDE clamping masks are + * swapped relatively to the partition ids. + */ + if (id == TEGRA_POWERGATE_VDEC) + mask = (1 << TEGRA_POWERGATE_PCIE); + else if (id == TEGRA_POWERGATE_PCIE) + mask = (1 << TEGRA_POWERGATE_VDEC); + else + mask = (1 << id); + + tegra_pmc_writel(mask, PMC_REMOVE_CLAMPING); + + return 0; +} + +bool tegra_pmc_cpu_is_powered(int cpuid) +{ + int id; + + id = tegra_pmc_get_cpu_powerdomain_id(cpuid); + if (id < 0) + return false; + return tegra_pmc_powergate_is_powered(id); } -#ifdef CONFIG_OF +int tegra_pmc_cpu_power_on(int cpuid) +{ + int id; + + id = tegra_pmc_get_cpu_powerdomain_id(cpuid); + if (id < 0) + return id; + return tegra_pmc_powergate_set(id, true); +} + +int tegra_pmc_cpu_remove_clamping(int cpuid) +{ + int id; + + id = tegra_pmc_get_cpu_powerdomain_id(cpuid); + if (id < 0) + return id; + return tegra_pmc_powergate_remove_clamping(id); +} + +#ifdef CONFIG_PM_SLEEP +static void set_power_timers(u32 us_on, u32 us_off, unsigned long rate) +{ + unsigned long long ticks; + unsigned long long pclk; + static unsigned long tegra_last_pclk; + + if (WARN_ON_ONCE(rate <= 0)) + pclk = 100000000; + else + pclk = rate; + + if ((rate != tegra_last_pclk)) { + ticks = (us_on * pclk) + 999999ull; + do_div(ticks, 1000000); + tegra_pmc_writel((unsigned long)ticks, PMC_CPUPWRGOOD_TIMER); + + ticks = (us_off * pclk) + 999999ull; + do_div(ticks, 1000000); + tegra_pmc_writel((unsigned long)ticks, PMC_CPUPWROFF_TIMER); + wmb(); + } + tegra_last_pclk = pclk; +} + +enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void) +{ + return pmc_pm_data.suspend_mode; +} + +void tegra_pmc_pm_set(enum tegra_suspend_mode mode) +{ + u32 reg; + unsigned long rate = 0; + + reg = tegra_pmc_readl(PMC_CTRL); + reg |= TEGRA_POWER_CPU_PWRREQ_OE; + reg &= ~TEGRA_POWER_EFFECT_LP0; + + switch (mode) { + case TEGRA_SUSPEND_LP2: + rate = clk_get_rate(tegra_pclk); + break; + default: + break; + } + + set_power_timers(pmc_pm_data.cpu_good_time, pmc_pm_data.cpu_off_time, + rate); + + tegra_pmc_writel(reg, PMC_CTRL); +} + +void tegra_pmc_suspend_init(void) +{ + u32 reg; + + /* Always enable CPU power request */ + reg = tegra_pmc_readl(PMC_CTRL); + reg |= TEGRA_POWER_CPU_PWRREQ_OE; + tegra_pmc_writel(reg, PMC_CTRL); +} +#endif + static const struct of_device_id matches[] __initconst = { + { .compatible = "nvidia,tegra114-pmc" }, + { .compatible = "nvidia,tegra30-pmc" }, { .compatible = "nvidia,tegra20-pmc" }, { } }; -#endif -void __init tegra_pmc_init(void) +static void tegra_pmc_parse_dt(void) { - /* - * For now, Harmony is the only board that uses the PMC, and it wants - * the signal inverted. Seaboard would too if it used the PMC. - * Hopefully by the time other boards want to use the PMC, everything - * will be device-tree, or they also want it inverted. - */ - bool invert_interrupt = true; - u32 val; + struct device_node *np; + u32 prop; + enum tegra_suspend_mode suspend_mode; + u32 core_good_time[2] = {0, 0}; + u32 lp0_vec[2] = {0, 0}; -#ifdef CONFIG_OF - if (of_have_populated_dt()) { - struct device_node *np; + np = of_find_matching_node(NULL, matches); + BUG_ON(!np); - invert_interrupt = false; + tegra_pmc_base = of_iomap(np, 0); - np = of_find_matching_node(NULL, matches); - if (np) { - if (of_find_property(np, "nvidia,invert-interrupt", - NULL)) - invert_interrupt = true; + tegra_pmc_invert_interrupt = of_property_read_bool(np, + "nvidia,invert-interrupt"); + tegra_pclk = of_clk_get_by_name(np, "pclk"); + WARN_ON(IS_ERR(tegra_pclk)); + + /* Grabbing the power management configurations */ + if (of_property_read_u32(np, "nvidia,suspend-mode", &prop)) { + suspend_mode = TEGRA_SUSPEND_NONE; + } else { + switch (prop) { + case 0: + suspend_mode = TEGRA_SUSPEND_LP0; + break; + case 1: + suspend_mode = TEGRA_SUSPEND_LP1; + break; + case 2: + suspend_mode = TEGRA_SUSPEND_LP2; + break; + default: + suspend_mode = TEGRA_SUSPEND_NONE; + break; } } -#endif + suspend_mode = tegra_pm_validate_suspend_mode(suspend_mode); + + if (of_property_read_u32(np, "nvidia,cpu-pwr-good-time", &prop)) + suspend_mode = TEGRA_SUSPEND_NONE; + pmc_pm_data.cpu_good_time = prop; + + if (of_property_read_u32(np, "nvidia,cpu-pwr-off-time", &prop)) + suspend_mode = TEGRA_SUSPEND_NONE; + pmc_pm_data.cpu_off_time = prop; + + if (of_property_read_u32_array(np, "nvidia,core-pwr-good-time", + core_good_time, ARRAY_SIZE(core_good_time))) + suspend_mode = TEGRA_SUSPEND_NONE; + pmc_pm_data.core_osc_time = core_good_time[0]; + pmc_pm_data.core_pmu_time = core_good_time[1]; + + if (of_property_read_u32(np, "nvidia,core-pwr-off-time", + &prop)) + suspend_mode = TEGRA_SUSPEND_NONE; + pmc_pm_data.core_off_time = prop; + + pmc_pm_data.corereq_high = of_property_read_bool(np, + "nvidia,core-power-req-active-high"); + + pmc_pm_data.sysclkreq_high = of_property_read_bool(np, + "nvidia,sys-clock-req-active-high"); + + pmc_pm_data.combined_req = of_property_read_bool(np, + "nvidia,combined-power-req"); + + pmc_pm_data.cpu_pwr_good_en = of_property_read_bool(np, + "nvidia,cpu-pwr-good-en"); + + if (of_property_read_u32_array(np, "nvidia,lp0-vec", lp0_vec, + ARRAY_SIZE(lp0_vec))) + if (suspend_mode == TEGRA_SUSPEND_LP0) + suspend_mode = TEGRA_SUSPEND_LP1; + + pmc_pm_data.lp0_vec_phy_addr = lp0_vec[0]; + pmc_pm_data.lp0_vec_size = lp0_vec[1]; + + pmc_pm_data.suspend_mode = suspend_mode; +} + +void __init tegra_pmc_init(void) +{ + u32 val; + + tegra_pmc_parse_dt(); val = tegra_pmc_readl(PMC_CTRL); - if (invert_interrupt) + if (tegra_pmc_invert_interrupt) val |= PMC_CTRL_INTR_LOW; else val &= ~PMC_CTRL_INTR_LOW; diff --git a/arch/arm/mach-tegra/pmc.h b/arch/arm/mach-tegra/pmc.h index 8995ee4..e1c2df2 100644 --- a/arch/arm/mach-tegra/pmc.h +++ b/arch/arm/mach-tegra/pmc.h @@ -18,6 +18,24 @@ #ifndef __MACH_TEGRA_PMC_H #define __MACH_TEGRA_PMC_H +enum tegra_suspend_mode { + TEGRA_SUSPEND_NONE = 0, + TEGRA_SUSPEND_LP2, /* CPU voltage off */ + TEGRA_SUSPEND_LP1, /* CPU voltage off, DRAM self-refresh */ + TEGRA_SUSPEND_LP0, /* CPU + core voltage off, DRAM self-refresh */ + TEGRA_MAX_SUSPEND_MODE, +}; + +#ifdef CONFIG_PM_SLEEP +enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void); +void tegra_pmc_pm_set(enum tegra_suspend_mode mode); +void tegra_pmc_suspend_init(void); +#endif + +bool tegra_pmc_cpu_is_powered(int cpuid); +int tegra_pmc_cpu_power_on(int cpuid); +int tegra_pmc_cpu_remove_clamping(int cpuid); + void tegra_pmc_init(void); #endif diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S index 54382ce..1676aba 100644 --- a/arch/arm/mach-tegra/reset-handler.S +++ b/arch/arm/mach-tegra/reset-handler.S @@ -41,9 +41,6 @@ */ ENTRY(tegra_resume) bl v7_invalidate_l1 - /* Enable coresight */ - mov32 r0, 0xC5ACCE55 - mcr p14, 0, r0, c7, c12, 6 cpu_id r0 cmp r0, #0 @ CPU0? @@ -99,6 +96,8 @@ ENTRY(__tegra_cpu_reset_handler_start) * * Register usage within the reset handler: * + * Others: scratch + * R6 = SoC ID << 8 * R7 = CPU present (to the OS) mask * R8 = CPU in LP1 state mask * R9 = CPU in LP2 state mask @@ -114,6 +113,40 @@ ENTRY(__tegra_cpu_reset_handler_start) ENTRY(__tegra_cpu_reset_handler) cpsid aif, 0x13 @ SVC mode, interrupts disabled + + mov32 r6, TEGRA_APB_MISC_BASE + ldr r6, [r6, #APB_MISC_GP_HIDREV] + and r6, r6, #0xff00 +#ifdef CONFIG_ARCH_TEGRA_2x_SOC +t20_check: + cmp r6, #(0x20 << 8) + bne after_t20_check +t20_errata: + # Tegra20 is a Cortex-A9 r1p1 + mrc p15, 0, r0, c1, c0, 0 @ read system control register + orr r0, r0, #1 << 14 @ erratum 716044 + mcr p15, 0, r0, c1, c0, 0 @ write system control register + mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register + orr r0, r0, #1 << 4 @ erratum 742230 + orr r0, r0, #1 << 11 @ erratum 751472 + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register + b after_errata +after_t20_check: +#endif +#ifdef CONFIG_ARCH_TEGRA_3x_SOC +t30_check: + cmp r6, #(0x30 << 8) + bne after_t30_check +t30_errata: + # Tegra30 is a Cortex-A9 r2p9 + mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register + orr r0, r0, #1 << 6 @ erratum 743622 + orr r0, r0, #1 << 11 @ erratum 751472 + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register + b after_errata +after_t30_check: +#endif +after_errata: mrc p15, 0, r10, c0, c0, 5 @ MPIDR and r10, r10, #0x3 @ R10 = CPU number mov r11, #1 @@ -129,16 +162,13 @@ ENTRY(__tegra_cpu_reset_handler) #ifdef CONFIG_ARCH_TEGRA_2x_SOC /* Are we on Tegra20? */ - mov32 r6, TEGRA_APB_MISC_BASE - ldr r0, [r6, #APB_MISC_GP_HIDREV] - and r0, r0, #0xff00 - cmp r0, #(0x20 << 8) + cmp r6, #(0x20 << 8) bne 1f /* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */ - mov32 r6, TEGRA_PMC_BASE + mov32 r5, TEGRA_PMC_BASE mov r0, #0 cmp r10, #0 - strne r0, [r6, #PMC_SCRATCH41] + strne r0, [r5, #PMC_SCRATCH41] 1: #endif diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h index 4ffae54..970ebd5 100644 --- a/arch/arm/mach-tegra/sleep.h +++ b/arch/arm/mach-tegra/sleep.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved. + * Copyright (c) 2010-2013, NVIDIA Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -124,11 +124,11 @@ int tegra_sleep_cpu_finish(unsigned long); void tegra_disable_clean_inv_dcache(void); #ifdef CONFIG_HOTPLUG_CPU -void tegra20_hotplug_init(void); -void tegra30_hotplug_init(void); +void tegra20_hotplug_shutdown(void); +void tegra30_hotplug_shutdown(void); +void tegra_hotplug_init(void); #else -static inline void tegra20_hotplug_init(void) {} -static inline void tegra30_hotplug_init(void) {} +static inline void tegra_hotplug_init(void) {} #endif void tegra20_cpu_shutdown(int cpu); diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/tegra.c index a0edf25..61749e2 100644 --- a/arch/arm/mach-tegra/board-dt-tegra20.c +++ b/arch/arm/mach-tegra/tegra.c @@ -1,6 +1,7 @@ /* - * nVidia Tegra device tree board support + * NVIDIA Tegra SoC device tree board support * + * Copyright (C) 2011, 2013, NVIDIA Corporation * Copyright (C) 2010 Secret Lab Technologies, Ltd. * Copyright (C) 2010 Google, Inc. * @@ -32,7 +33,10 @@ #include <linux/io.h> #include <linux/i2c.h> #include <linux/i2c-tegra.h> +#include <linux/slab.h> +#include <linux/sys_soc.h> #include <linux/usb/tegra_usb_phy.h> +#include <linux/clk/tegra.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -41,6 +45,7 @@ #include "board.h" #include "common.h" +#include "fuse.h" #include "iomap.h" static struct tegra_ehci_platform_data tegra_ehci1_pdata = { @@ -79,12 +84,38 @@ static struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = { static void __init tegra_dt_init(void) { + struct soc_device_attribute *soc_dev_attr; + struct soc_device *soc_dev; + struct device *parent = NULL; + + tegra_clocks_apply_init_table(); + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + goto out; + + soc_dev_attr->family = kasprintf(GFP_KERNEL, "Tegra"); + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%d", tegra_revision); + soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%d", tegra_chip_id); + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR(soc_dev)) { + kfree(soc_dev_attr->family); + kfree(soc_dev_attr->revision); + kfree(soc_dev_attr->soc_id); + kfree(soc_dev_attr); + goto out; + } + + parent = soc_device_to_device(soc_dev); + /* * Finished with the static registrations now; fill in the missing * devices */ +out: of_platform_populate(NULL, of_default_bus_match_table, - tegra20_auxdata_lookup, NULL); + tegra20_auxdata_lookup, parent); } static void __init trimslice_init(void) @@ -111,7 +142,8 @@ static void __init harmony_init(void) static void __init paz00_init(void) { - tegra_paz00_wifikill_init(); + if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC)) + tegra_paz00_wifikill_init(); } static struct { @@ -137,19 +169,21 @@ static void __init tegra_dt_init_late(void) } } -static const char *tegra20_dt_board_compat[] = { +static const char * const tegra_dt_board_compat[] = { + "nvidia,tegra114", + "nvidia,tegra30", "nvidia,tegra20", NULL }; -DT_MACHINE_START(TEGRA_DT, "nVidia Tegra20 (Flattened Device Tree)") +DT_MACHINE_START(TEGRA_DT, "NVIDIA Tegra SoC (Flattened Device Tree)") .map_io = tegra_map_common_io, .smp = smp_ops(tegra_smp_ops), - .init_early = tegra20_init_early, + .init_early = tegra_init_early, .init_irq = tegra_dt_init_irq, .init_time = clocksource_of_init, .init_machine = tegra_dt_init, .init_late = tegra_dt_init_late, .restart = tegra_assert_system_reset, - .dt_compat = tegra20_dt_board_compat, + .dt_compat = tegra_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-tegra/tegra114_speedo.c b/arch/arm/mach-tegra/tegra114_speedo.c new file mode 100644 index 0000000..5218d48 --- /dev/null +++ b/arch/arm/mach-tegra/tegra114_speedo.c @@ -0,0 +1,104 @@ +/* + * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/kernel.h> +#include <linux/bug.h> + +#include "fuse.h" + +#define CORE_PROCESS_CORNERS_NUM 2 +#define CPU_PROCESS_CORNERS_NUM 2 + +enum { + THRESHOLD_INDEX_0, + THRESHOLD_INDEX_1, + THRESHOLD_INDEX_COUNT, +}; + +static const u32 core_process_speedos[][CORE_PROCESS_CORNERS_NUM] = { + {1123, UINT_MAX}, + {0, UINT_MAX}, +}; + +static const u32 cpu_process_speedos[][CPU_PROCESS_CORNERS_NUM] = { + {1695, UINT_MAX}, + {0, UINT_MAX}, +}; + +static void rev_sku_to_speedo_ids(int rev, int sku, int *threshold) +{ + u32 tmp; + + switch (sku) { + case 0x00: + case 0x10: + case 0x05: + case 0x06: + tegra_cpu_speedo_id = 1; + tegra_soc_speedo_id = 0; + *threshold = THRESHOLD_INDEX_0; + break; + + case 0x03: + case 0x04: + tegra_cpu_speedo_id = 2; + tegra_soc_speedo_id = 1; + *threshold = THRESHOLD_INDEX_1; + break; + + default: + pr_err("Tegra114 Unknown SKU %d\n", sku); + tegra_cpu_speedo_id = 0; + tegra_soc_speedo_id = 0; + *threshold = THRESHOLD_INDEX_0; + break; + } + + if (rev == TEGRA_REVISION_A01) { + tmp = tegra_fuse_readl(0x270) << 1; + tmp |= tegra_fuse_readl(0x26c); + if (!tmp) + tegra_cpu_speedo_id = 0; + } +} + +void tegra114_init_speedo_data(void) +{ + u32 cpu_speedo_val; + u32 core_speedo_val; + int threshold; + int i; + + BUILD_BUG_ON(ARRAY_SIZE(cpu_process_speedos) != + THRESHOLD_INDEX_COUNT); + BUILD_BUG_ON(ARRAY_SIZE(core_process_speedos) != + THRESHOLD_INDEX_COUNT); + + rev_sku_to_speedo_ids(tegra_revision, tegra_sku_id, &threshold); + + cpu_speedo_val = tegra_fuse_readl(0x12c) + 1024; + core_speedo_val = tegra_fuse_readl(0x134); + + for (i = 0; i < CPU_PROCESS_CORNERS_NUM; i++) + if (cpu_speedo_val < cpu_process_speedos[threshold][i]) + break; + tegra_cpu_process_id = i; + + for (i = 0; i < CORE_PROCESS_CORNERS_NUM; i++) + if (core_speedo_val < core_process_speedos[threshold][i]) + break; + tegra_core_process_id = i; +} diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c index a6af0b8..d07bbe7 100644 --- a/arch/arm/mach-ux500/timer.c +++ b/arch/arm/mach-ux500/timer.c @@ -7,6 +7,7 @@ #include <linux/io.h> #include <linux/errno.h> #include <linux/clksrc-dbx500-prcmu.h> +#include <linux/clocksource.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/platform_data/clocksource-nomadik-mtu.h> @@ -32,7 +33,7 @@ static void __init ux500_twd_init(void) twd_local_timer = &u8500_twd_local_timer; if (of_have_populated_dt()) - twd_local_timer_of_register(); + clocksource_of_init(); else { err = twd_local_timer_register(twd_local_timer); if (err) diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 915683c..d0ad789 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -5,6 +5,7 @@ #include <linux/amba/bus.h> #include <linux/amba/mmci.h> #include <linux/io.h> +#include <linux/clocksource.h> #include <linux/smp.h> #include <linux/init.h> #include <linux/irqchip.h> @@ -25,7 +26,6 @@ #include <asm/arch_timer.h> #include <asm/mach-types.h> #include <asm/sizes.h> -#include <asm/smp_twd.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> @@ -435,6 +435,7 @@ static void __init v2m_dt_timer_init(void) vexpress_clk_of_init(); + clocksource_of_init(); do { node = of_find_compatible_node(node, NULL, "arm,sp804"); } while (node && vexpress_get_site_by_node(node) != VEXPRESS_SITE_MB); @@ -445,8 +446,7 @@ static void __init v2m_dt_timer_init(void) irq_of_parse_and_map(node, 0)); } - if (arch_timer_of_register() != 0) - twd_local_timer_of_register(); + arch_timer_of_register(); if (arch_timer_sched_clock_init() != 0) versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index 6828ef6..a0bd8a7 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -576,7 +576,7 @@ load_ind: /* x = ((*(frame + k)) & 0xf) << 2; */ ctx->seen |= SEEN_X | SEEN_DATA | SEEN_CALL; /* the interpreter should deal with the negative K */ - if (k < 0) + if ((int)k < 0) return -1; /* offset in r1: we might have to take the slow path */ emit_mov_i(r_off, k, ctx); |