diff options
Diffstat (limited to 'arch/arm')
69 files changed, 496 insertions, 495 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 13b7394..1cacda4 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1183,9 +1183,9 @@ config ARM_NR_BANKS default 8 config IWMMXT - bool "Enable iWMMXt support" + bool "Enable iWMMXt support" if !CPU_PJ4 depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 - default y if PXA27x || PXA3xx || ARCH_MMP + default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 help Enable support for iWMMXt context switching at run time if running on a CPU that supports it. @@ -1439,6 +1439,16 @@ config ARM_ERRATA_775420 to deadlock. This workaround puts DSB before executing ISB if an abort may occur on cache maintenance. +config ARM_ERRATA_798181 + bool "ARM errata: TLBI/DSB failure on Cortex-A15" + depends on CPU_V7 && SMP + help + On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not + adequately shooting down all use of the old entries. This + option enables the Linux kernel workaround for this erratum + which sends an IPI to the CPUs that are running the same ASID + as the one being invalidated. + endmenu source "arch/arm/common/Kconfig" diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index dd0c57d..3234875 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -54,7 +54,7 @@ }; mvsdio@d00d4000 { - pinctrl-0 = <&sdio_pins2>; + pinctrl-0 = <&sdio_pins3>; pinctrl-names = "default"; status = "okay"; /* diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 8188d13..a195deb 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -59,6 +59,12 @@ "mpp50", "mpp51", "mpp52"; marvell,function = "sd0"; }; + + sdio_pins3: sdio-pins3 { + marvell,pins = "mpp48", "mpp49", "mpp50", + "mpp51", "mpp52", "mpp53"; + marvell,function = "sd0"; + }; }; gpio0: gpio@d0018100 { diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 9de9309..aaa63d0 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -191,8 +191,8 @@ prcmu: prcmu@80157000 { compatible = "stericsson,db8500-prcmu"; - reg = <0x80157000 0x1000>; - reg-names = "prcmu"; + reg = <0x80157000 0x1000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>; + reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm"; interrupts = <0 47 0x4>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts index bd83b8f..c3573be 100644 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -77,6 +77,7 @@ }; nand@3000000 { + chip-delay = <40>; status = "okay"; partition@0 { diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi index 8aad00f..f7bec3b 100644 --- a/arch/arm/boot/dts/orion5x.dtsi +++ b/arch/arm/boot/dts/orion5x.dtsi @@ -13,6 +13,9 @@ compatible = "marvell,orion5x"; interrupt-parent = <&intc>; + aliases { + gpio0 = &gpio0; + }; intc: interrupt-controller { compatible = "marvell,orion-intc", "marvell,intc"; interrupt-controller; @@ -32,7 +35,9 @@ #gpio-cells = <2>; gpio-controller; reg = <0x10100 0x40>; - ngpio = <32>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; interrupts = <6>, <7>, <8>, <9>; }; @@ -91,7 +96,7 @@ reg = <0x90000 0x10000>, <0xf2200000 0x800>; reg-names = "regs", "sram"; - interrupts = <22>; + interrupts = <28>; status = "okay"; }; }; diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index bd07864..33903ca 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -93,6 +93,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384 CONFIG_SENSORS_LIS3LV02D=m CONFIG_SENSORS_TSL2550=m CONFIG_SENSORS_LIS3_I2C=m +CONFIG_BMP085_I2C=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y diff --git a/arch/arm/include/asm/delay.h b/arch/arm/include/asm/delay.h index 720799f..dff714d 100644 --- a/arch/arm/include/asm/delay.h +++ b/arch/arm/include/asm/delay.h @@ -24,7 +24,7 @@ extern struct arm_delay_ops { void (*delay)(unsigned long); void (*const_udelay)(unsigned long); void (*udelay)(unsigned long); - bool const_clock; + unsigned long ticks_per_jiffy; } arm_delay_ops; #define __delay(n) arm_delay_ops.delay(n) diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h index 8c5e828..91b99ab 100644 --- a/arch/arm/include/asm/highmem.h +++ b/arch/arm/include/asm/highmem.h @@ -41,6 +41,13 @@ extern void kunmap_high(struct page *page); #endif #endif +/* + * Needed to be able to broadcast the TLB invalidation for kmap. + */ +#ifdef CONFIG_ARM_ERRATA_798181 +#undef ARCH_NEEDS_KMAP_HIGH_GET +#endif + #ifdef ARCH_NEEDS_KMAP_HIGH_GET extern void *kmap_high_get(struct page *page); #else diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h index 863a661..a7b85e0 100644 --- a/arch/arm/include/asm/mmu_context.h +++ b/arch/arm/include/asm/mmu_context.h @@ -27,6 +27,8 @@ void __check_vmalloc_seq(struct mm_struct *mm); void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk); #define init_new_context(tsk,mm) ({ atomic64_set(&mm->context.id, 0); 0; }) +DECLARE_PER_CPU(atomic64_t, active_asids); + #else /* !CONFIG_CPU_HAS_ASID */ #ifdef CONFIG_MMU diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index 4db8c88..9e9c041 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -450,6 +450,21 @@ static inline void local_flush_bp_all(void) isb(); } +#ifdef CONFIG_ARM_ERRATA_798181 +static inline void dummy_flush_tlb_a15_erratum(void) +{ + /* + * Dummy TLBIMVAIS. Using the unmapped address 0 and ASID 0. + */ + asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (0)); + dsb(); +} +#else +static inline void dummy_flush_tlb_a15_erratum(void) +{ +} +#endif + /* * flush_pmd_entry * diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 3248cde..fefd7f9 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -276,7 +276,13 @@ ENDPROC(ftrace_graph_caller_old) */ .macro mcount_enter +/* + * This pad compensates for the push {lr} at the call site. Note that we are + * unable to unwind through a function which does not otherwise save its lr. + */ + UNWIND(.pad #4) stmdb sp!, {r0-r3, lr} + UNWIND(.save {r0-r3, lr}) .endm .macro mcount_get_lr reg @@ -289,6 +295,7 @@ ENDPROC(ftrace_graph_caller_old) .endm ENTRY(__gnu_mcount_nc) +UNWIND(.fnstart) #ifdef CONFIG_DYNAMIC_FTRACE mov ip, lr ldmia sp!, {lr} @@ -296,17 +303,22 @@ ENTRY(__gnu_mcount_nc) #else __mcount #endif +UNWIND(.fnend) ENDPROC(__gnu_mcount_nc) #ifdef CONFIG_DYNAMIC_FTRACE ENTRY(ftrace_caller) +UNWIND(.fnstart) __ftrace_caller +UNWIND(.fnend) ENDPROC(ftrace_caller) #endif #ifdef CONFIG_FUNCTION_GRAPH_TRACER ENTRY(ftrace_graph_caller) +UNWIND(.fnstart) __ftrace_graph_caller +UNWIND(.fnend) ENDPROC(ftrace_graph_caller) #endif diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index e0eb9a1..8bac553 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -267,7 +267,7 @@ __create_page_tables: addne r6, r6, #1 << SECTION_SHIFT strne r6, [r3] -#if defined(CONFIG_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8) +#if defined(CONFIG_ARM_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8) sub r4, r4, #4 @ Fixup page table pointer @ for 64-bit descriptors #endif diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 96093b7..5dc1aa6 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -966,7 +966,7 @@ static void reset_ctrl_regs(void *unused) } if (err) { - pr_warning("CPU %d debug is powered down!\n", cpu); + pr_warn_once("CPU %d debug is powered down!\n", cpu); cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu)); return; } @@ -987,7 +987,7 @@ clear_vcr: isb(); if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) { - pr_warning("CPU %d failed to disable vector catch\n", cpu); + pr_warn_once("CPU %d failed to disable vector catch\n", cpu); return; } @@ -1007,7 +1007,7 @@ clear_vcr: } if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) { - pr_warning("CPU %d failed to clear debug register pairs\n", cpu); + pr_warn_once("CPU %d failed to clear debug register pairs\n", cpu); return; } diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 3f6cbb2..d343a6c 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -353,6 +353,23 @@ void __init early_print(const char *str, ...) printk("%s", buf); } +static void __init cpuid_init_hwcaps(void) +{ + unsigned int divide_instrs; + + if (cpu_architecture() < CPU_ARCH_ARMv7) + return; + + divide_instrs = (read_cpuid_ext(CPUID_EXT_ISAR0) & 0x0f000000) >> 24; + + switch (divide_instrs) { + case 2: + elf_hwcap |= HWCAP_IDIVA; + case 1: + elf_hwcap |= HWCAP_IDIVT; + } +} + static void __init feat_v6_fixup(void) { int id = read_cpuid_id(); @@ -483,8 +500,11 @@ static void __init setup_processor(void) snprintf(elf_platform, ELF_PLATFORM_SIZE, "%s%c", list->elf_name, ENDIANNESS); elf_hwcap = list->elf_hwcap; + + cpuid_init_hwcaps(); + #ifndef CONFIG_ARM_THUMB - elf_hwcap &= ~HWCAP_THUMB; + elf_hwcap &= ~(HWCAP_THUMB | HWCAP_IDIVT); #endif feat_v6_fixup(); @@ -524,7 +544,7 @@ int __init arm_add_memory(phys_addr_t start, phys_addr_t size) size -= start & ~PAGE_MASK; bank->start = PAGE_ALIGN(start); -#ifndef CONFIG_LPAE +#ifndef CONFIG_ARM_LPAE if (bank->start + size < bank->start) { printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in " "32-bit physical address space\n", (long long)start); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 79078ed..1f2cccc 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -673,9 +673,6 @@ static int cpufreq_callback(struct notifier_block *nb, if (freq->flags & CPUFREQ_CONST_LOOPS) return NOTIFY_OK; - if (arm_delay_ops.const_clock) - return NOTIFY_OK; - if (!per_cpu(l_p_j_ref, cpu)) { per_cpu(l_p_j_ref, cpu) = per_cpu(cpu_data, cpu).loops_per_jiffy; diff --git a/arch/arm/kernel/smp_tlb.c b/arch/arm/kernel/smp_tlb.c index bd03005..e82e1d2 100644 --- a/arch/arm/kernel/smp_tlb.c +++ b/arch/arm/kernel/smp_tlb.c @@ -12,6 +12,7 @@ #include <asm/smp_plat.h> #include <asm/tlbflush.h> +#include <asm/mmu_context.h> /**********************************************************************/ @@ -69,12 +70,72 @@ static inline void ipi_flush_bp_all(void *ignored) local_flush_bp_all(); } +#ifdef CONFIG_ARM_ERRATA_798181 +static int erratum_a15_798181(void) +{ + unsigned int midr = read_cpuid_id(); + + /* Cortex-A15 r0p0..r3p2 affected */ + if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2) + return 0; + return 1; +} +#else +static int erratum_a15_798181(void) +{ + return 0; +} +#endif + +static void ipi_flush_tlb_a15_erratum(void *arg) +{ + dmb(); +} + +static void broadcast_tlb_a15_erratum(void) +{ + if (!erratum_a15_798181()) + return; + + dummy_flush_tlb_a15_erratum(); + smp_call_function_many(cpu_online_mask, ipi_flush_tlb_a15_erratum, + NULL, 1); +} + +static void broadcast_tlb_mm_a15_erratum(struct mm_struct *mm) +{ + int cpu; + cpumask_t mask = { CPU_BITS_NONE }; + + if (!erratum_a15_798181()) + return; + + dummy_flush_tlb_a15_erratum(); + for_each_online_cpu(cpu) { + if (cpu == smp_processor_id()) + continue; + /* + * We only need to send an IPI if the other CPUs are running + * the same ASID as the one being invalidated. There is no + * need for locking around the active_asids check since the + * switch_mm() function has at least one dmb() (as required by + * this workaround) in case a context switch happens on + * another CPU after the condition below. + */ + if (atomic64_read(&mm->context.id) == + atomic64_read(&per_cpu(active_asids, cpu))) + cpumask_set_cpu(cpu, &mask); + } + smp_call_function_many(&mask, ipi_flush_tlb_a15_erratum, NULL, 1); +} + void flush_tlb_all(void) { if (tlb_ops_need_broadcast()) on_each_cpu(ipi_flush_tlb_all, NULL, 1); else local_flush_tlb_all(); + broadcast_tlb_a15_erratum(); } void flush_tlb_mm(struct mm_struct *mm) @@ -83,6 +144,7 @@ void flush_tlb_mm(struct mm_struct *mm) on_each_cpu_mask(mm_cpumask(mm), ipi_flush_tlb_mm, mm, 1); else local_flush_tlb_mm(mm); + broadcast_tlb_mm_a15_erratum(mm); } void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) @@ -95,6 +157,7 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) &ta, 1); } else local_flush_tlb_page(vma, uaddr); + broadcast_tlb_mm_a15_erratum(vma->vm_mm); } void flush_tlb_kernel_page(unsigned long kaddr) @@ -105,6 +168,7 @@ void flush_tlb_kernel_page(unsigned long kaddr) on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1); } else local_flush_tlb_kernel_page(kaddr); + broadcast_tlb_a15_erratum(); } void flush_tlb_range(struct vm_area_struct *vma, @@ -119,6 +183,7 @@ void flush_tlb_range(struct vm_area_struct *vma, &ta, 1); } else local_flush_tlb_range(vma, start, end); + broadcast_tlb_mm_a15_erratum(vma->vm_mm); } void flush_tlb_kernel_range(unsigned long start, unsigned long end) @@ -130,6 +195,7 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end) on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1); } else local_flush_tlb_kernel_range(start, end); + broadcast_tlb_a15_erratum(); } void flush_bp_all(void) diff --git a/arch/arm/kvm/vgic.c b/arch/arm/kvm/vgic.c index c9a1731..0e4cfe1 100644 --- a/arch/arm/kvm/vgic.c +++ b/arch/arm/kvm/vgic.c @@ -883,8 +883,7 @@ static bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 sgi_source_id, int irq) lr, irq, vgic_cpu->vgic_lr[lr]); BUG_ON(!test_bit(lr, vgic_cpu->lr_used)); vgic_cpu->vgic_lr[lr] |= GICH_LR_PENDING_BIT; - - goto out; + return true; } /* Try to use another LR for this interrupt */ @@ -898,7 +897,6 @@ static bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 sgi_source_id, int irq) vgic_cpu->vgic_irq_lr_map[irq] = lr; set_bit(lr, vgic_cpu->lr_used); -out: if (!vgic_irq_is_edge(vcpu, irq)) vgic_cpu->vgic_lr[lr] |= GICH_LR_EOI; @@ -1018,21 +1016,6 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu) kvm_debug("MISR = %08x\n", vgic_cpu->vgic_misr); - /* - * We do not need to take the distributor lock here, since the only - * action we perform is clearing the irq_active_bit for an EOIed - * level interrupt. There is a potential race with - * the queuing of an interrupt in __kvm_vgic_flush_hwstate(), where we - * check if the interrupt is already active. Two possibilities: - * - * - The queuing is occurring on the same vcpu: cannot happen, - * as we're already in the context of this vcpu, and - * executing the handler - * - The interrupt has been migrated to another vcpu, and we - * ignore this interrupt for this run. Big deal. It is still - * pending though, and will get considered when this vcpu - * exits. - */ if (vgic_cpu->vgic_misr & GICH_MISR_EOI) { /* * Some level interrupts have been EOIed. Clear their @@ -1054,6 +1037,13 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu) } else { vgic_cpu_irq_clear(vcpu, irq); } + + /* + * Despite being EOIed, the LR may not have + * been marked as empty. + */ + set_bit(lr, (unsigned long *)vgic_cpu->vgic_elrsr); + vgic_cpu->vgic_lr[lr] &= ~GICH_LR_ACTIVE_BIT; } } @@ -1064,9 +1054,8 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu) } /* - * Sync back the VGIC state after a guest run. We do not really touch - * the distributor here (the irq_pending_on_cpu bit is safe to set), - * so there is no need for taking its lock. + * Sync back the VGIC state after a guest run. The distributor lock is + * needed so we don't get preempted in the middle of the state processing. */ static void __kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu) { @@ -1112,10 +1101,14 @@ void kvm_vgic_flush_hwstate(struct kvm_vcpu *vcpu) void kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu) { + struct vgic_dist *dist = &vcpu->kvm->arch.vgic; + if (!irqchip_in_kernel(vcpu->kvm)) return; + spin_lock(&dist->lock); __kvm_vgic_sync_hwstate(vcpu); + spin_unlock(&dist->lock); } int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu) diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c index 6b93f6a..64dbfa5 100644 --- a/arch/arm/lib/delay.c +++ b/arch/arm/lib/delay.c @@ -58,7 +58,7 @@ static void __timer_delay(unsigned long cycles) static void __timer_const_udelay(unsigned long xloops) { unsigned long long loops = xloops; - loops *= loops_per_jiffy; + loops *= arm_delay_ops.ticks_per_jiffy; __timer_delay(loops >> UDELAY_SHIFT); } @@ -73,11 +73,13 @@ void __init register_current_timer_delay(const struct delay_timer *timer) pr_info("Switching to timer-based delay loop\n"); delay_timer = timer; lpj_fine = timer->freq / HZ; - loops_per_jiffy = lpj_fine; + + /* cpufreq may scale loops_per_jiffy, so keep a private copy */ + arm_delay_ops.ticks_per_jiffy = lpj_fine; arm_delay_ops.delay = __timer_delay; arm_delay_ops.const_udelay = __timer_const_udelay; arm_delay_ops.udelay = __timer_udelay; - arm_delay_ops.const_clock = true; + delay_calibrated = true; } else { pr_info("Ignoring duplicate/late registration of read_current_timer delay\n"); diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c index e698f26..52e4bb5 100644 --- a/arch/arm/mach-cns3xxx/core.c +++ b/arch/arm/mach-cns3xxx/core.c @@ -22,19 +22,9 @@ static struct map_desc cns3xxx_io_desc[] __initdata = { { - .virtual = CNS3XXX_TC11MP_TWD_BASE_VIRT, - .pfn = __phys_to_pfn(CNS3XXX_TC11MP_TWD_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT, - .pfn = __phys_to_pfn(CNS3XXX_TC11MP_GIC_CPU_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT, - .pfn = __phys_to_pfn(CNS3XXX_TC11MP_GIC_DIST_BASE), - .length = SZ_4K, + .virtual = CNS3XXX_TC11MP_SCU_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_TC11MP_SCU_BASE), + .length = SZ_8K, .type = MT_DEVICE, }, { .virtual = CNS3XXX_TIMER1_2_3_BASE_VIRT, diff --git a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h index 191c8e5..b1021aa 100644 --- a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h +++ b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h @@ -94,10 +94,10 @@ #define RTC_INTR_STS_OFFSET 0x34 #define CNS3XXX_MISC_BASE 0x76000000 /* Misc Control */ -#define CNS3XXX_MISC_BASE_VIRT 0xFFF07000 /* Misc Control */ +#define CNS3XXX_MISC_BASE_VIRT 0xFB000000 /* Misc Control */ #define CNS3XXX_PM_BASE 0x77000000 /* Power Management Control */ -#define CNS3XXX_PM_BASE_VIRT 0xFFF08000 +#define CNS3XXX_PM_BASE_VIRT 0xFB001000 #define PM_CLK_GATE_OFFSET 0x00 #define PM_SOFT_RST_OFFSET 0x04 @@ -109,7 +109,7 @@ #define PM_PLL_HM_PD_OFFSET 0x1C #define CNS3XXX_UART0_BASE 0x78000000 /* UART 0 */ -#define CNS3XXX_UART0_BASE_VIRT 0xFFF09000 +#define CNS3XXX_UART0_BASE_VIRT 0xFB002000 #define CNS3XXX_UART1_BASE 0x78400000 /* UART 1 */ #define CNS3XXX_UART1_BASE_VIRT 0xFFF0A000 @@ -130,7 +130,7 @@ #define CNS3XXX_I2S_BASE_VIRT 0xFFF10000 #define CNS3XXX_TIMER1_2_3_BASE 0x7C800000 /* Timer */ -#define CNS3XXX_TIMER1_2_3_BASE_VIRT 0xFFF10800 +#define CNS3XXX_TIMER1_2_3_BASE_VIRT 0xFB003000 #define TIMER1_COUNTER_OFFSET 0x00 #define TIMER1_AUTO_RELOAD_OFFSET 0x04 @@ -227,16 +227,16 @@ * Testchip peripheral and fpga gic regions */ #define CNS3XXX_TC11MP_SCU_BASE 0x90000000 /* IRQ, Test chip */ -#define CNS3XXX_TC11MP_SCU_BASE_VIRT 0xFF000000 +#define CNS3XXX_TC11MP_SCU_BASE_VIRT 0xFB004000 #define CNS3XXX_TC11MP_GIC_CPU_BASE 0x90000100 /* Test chip interrupt controller CPU interface */ -#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT 0xFF000100 +#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x100) #define CNS3XXX_TC11MP_TWD_BASE 0x90000600 -#define CNS3XXX_TC11MP_TWD_BASE_VIRT 0xFF000600 +#define CNS3XXX_TC11MP_TWD_BASE_VIRT (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x600) #define CNS3XXX_TC11MP_GIC_DIST_BASE 0x90001000 /* Test chip interrupt controller distributor */ -#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT 0xFF001000 +#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x1000) #define CNS3XXX_TC11MP_L220_BASE 0x92002000 /* L220 registers */ #define CNS3XXX_TC11MP_L220_BASE_VIRT 0xFF002000 diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h index d2afb4d..b5cc77d 100644 --- a/arch/arm/mach-ep93xx/include/mach/uncompress.h +++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h @@ -47,9 +47,13 @@ static void __raw_writel(unsigned int value, unsigned int ptr) static inline void putc(int c) { - /* Transmit fifo not full? */ - while (__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF) - ; + int i; + + for (i = 0; i < 10000; i++) { + /* Transmit fifo not full? */ + if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF)) + break; + } __raw_writeb(c, PHYS_UART_DATA); } diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 5a800bf..5bf4a97 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -110,6 +110,8 @@ void tzic_handle_irq(struct pt_regs *); extern void imx_enable_cpu(int cpu, bool enable); extern void imx_set_cpu_jump(int cpu, void *jump_addr); +extern u32 imx_get_cpu_arg(int cpu); +extern void imx_set_cpu_arg(int cpu, u32 arg); extern void v7_cpu_resume(void); extern u32 *pl310_get_save_ptr(void); #ifdef CONFIG_SMP diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 7bc5fe1..361a253 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -46,11 +46,23 @@ static inline void cpu_enter_lowpower(void) void imx_cpu_die(unsigned int cpu) { cpu_enter_lowpower(); + /* + * We use the cpu jumping argument register to sync with + * imx_cpu_kill() which is running on cpu0 and waiting for + * the register being cleared to kill the cpu. + */ + imx_set_cpu_arg(cpu, ~0); cpu_do_idle(); } int imx_cpu_kill(unsigned int cpu) { + unsigned long timeout = jiffies + msecs_to_jiffies(50); + + while (imx_get_cpu_arg(cpu) == 0) + if (time_after(jiffies, timeout)) + return 0; imx_enable_cpu(cpu, false); + imx_set_cpu_arg(cpu, 0); return 1; } diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c index e15f155..09a742f 100644 --- a/arch/arm/mach-imx/src.c +++ b/arch/arm/mach-imx/src.c @@ -43,6 +43,18 @@ void imx_set_cpu_jump(int cpu, void *jump_addr) src_base + SRC_GPR1 + cpu * 8); } +u32 imx_get_cpu_arg(int cpu) +{ + cpu = cpu_logical_map(cpu); + return readl_relaxed(src_base + SRC_GPR1 + cpu * 8 + 4); +} + +void imx_set_cpu_arg(int cpu, u32 arg) +{ + cpu = cpu_logical_map(cpu); + writel_relaxed(arg, src_base + SRC_GPR1 + cpu * 8 + 4); +} + void imx_src_prepare_restart(void) { u32 val; diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c index 1c6e736..08dd739 100644 --- a/arch/arm/mach-kirkwood/guruplug-setup.c +++ b/arch/arm/mach-kirkwood/guruplug-setup.c @@ -53,6 +53,8 @@ static struct mv_sata_platform_data guruplug_sata_data = { static struct mvsdio_platform_data guruplug_mvsdio_data = { /* unfortunately the CD signal has not been connected */ + .gpio_card_detect = -1, + .gpio_write_protect = -1, }; static struct gpio_led guruplug_led_pins[] = { diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c index 8ddd69f..6a6eb54 100644 --- a/arch/arm/mach-kirkwood/openrd-setup.c +++ b/arch/arm/mach-kirkwood/openrd-setup.c @@ -55,6 +55,7 @@ static struct mv_sata_platform_data openrd_sata_data = { static struct mvsdio_platform_data openrd_mvsdio_data = { .gpio_card_detect = 29, /* MPP29 used as SD card detect */ + .gpio_write_protect = -1, }; static unsigned int openrd_mpp_config[] __initdata = { diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c index c7d93b4..d242231 100644 --- a/arch/arm/mach-kirkwood/rd88f6281-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c @@ -69,6 +69,7 @@ static struct mv_sata_platform_data rd88f6281_sata_data = { static struct mvsdio_platform_data rd88f6281_mvsdio_data = { .gpio_card_detect = 28, + .gpio_write_protect = -1, }; static unsigned int rd88f6281_mpp_config[] __initdata = { diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index 2969027..f9fd77e 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -62,7 +62,10 @@ static int msm_timer_set_next_event(unsigned long cycles, { u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE); - writel_relaxed(0, event_base + TIMER_CLEAR); + ctrl &= ~TIMER_ENABLE_EN; + writel_relaxed(ctrl, event_base + TIMER_ENABLE); + + writel_relaxed(ctrl, event_base + TIMER_CLEAR); writel_relaxed(cycles, event_base + TIMER_MATCH_VAL); writel_relaxed(ctrl | TIMER_ENABLE_EN, event_base + TIMER_ENABLE); return 0; diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index da93bcb..c3be068 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -5,6 +5,6 @@ AFLAGS_coherency_ll.o := -Wa,-march=armv7-a obj-y += system-controller.o obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o -obj-$(CONFIG_ARCH_MVEBU) += addr-map.o coherency.o coherency_ll.o pmsu.o irq-armada-370-xp.o +obj-$(CONFIG_ARCH_MVEBU) += addr-map.o coherency.o coherency_ll.o pmsu.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c index a5ea616d..433e8c5 100644 --- a/arch/arm/mach-mvebu/armada-370-xp.c +++ b/arch/arm/mach-mvebu/armada-370-xp.c @@ -19,6 +19,8 @@ #include <linux/time-armada-370-xp.h> #include <linux/clk/mvebu.h> #include <linux/dma-mapping.h> +#include <linux/irqchip.h> +#include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> @@ -54,6 +56,10 @@ void __init armada_370_xp_init_early(void) * to make sure such the allocations won't fail. */ init_dma_coherent_pool_size(SZ_1M); + +#ifdef CONFIG_CACHE_L2X0 + l2x0_of_init(0, ~0UL); +#endif } static void __init armada_370_xp_dt_init(void) @@ -72,8 +78,7 @@ DT_MACHINE_START(ARMADA_XP_DT, "Marvell Armada 370/XP (Device Tree)") .init_machine = armada_370_xp_dt_init, .map_io = armada_370_xp_map_io, .init_early = armada_370_xp_init_early, - .init_irq = armada_370_xp_init_irq, - .handle_irq = armada_370_xp_handle_irq, + .init_irq = irqchip_init, .init_time = armada_370_xp_timer_and_clk_init, .restart = mvebu_restart, .dt_compat = armada_370_xp_dt_compat, diff --git a/arch/arm/mach-mvebu/irq-armada-370-xp.c b/arch/arm/mach-mvebu/irq-armada-370-xp.c deleted file mode 100644 index 274ff58..0000000 --- a/arch/arm/mach-mvebu/irq-armada-370-xp.c +++ /dev/null @@ -1,296 +0,0 @@ -/* - * Marvell Armada 370 and Armada XP SoC IRQ handling - * - * Copyright (C) 2012 Marvell - * - * Lior Amsalem <alior@marvell.com> - * Gregory CLEMENT <gregory.clement@free-electrons.com> - * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * Ben Dooks <ben.dooks@codethink.co.uk> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/irqdomain.h> -#include <asm/mach/arch.h> -#include <asm/exception.h> -#include <asm/smp_plat.h> -#include <asm/hardware/cache-l2x0.h> - -/* Interrupt Controller Registers Map */ -#define ARMADA_370_XP_INT_SET_MASK_OFFS (0x48) -#define ARMADA_370_XP_INT_CLEAR_MASK_OFFS (0x4C) - -#define ARMADA_370_XP_INT_CONTROL (0x00) -#define ARMADA_370_XP_INT_SET_ENABLE_OFFS (0x30) -#define ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS (0x34) -#define ARMADA_370_XP_INT_SOURCE_CTL(irq) (0x100 + irq*4) - -#define ARMADA_370_XP_CPU_INTACK_OFFS (0x44) - -#define ARMADA_370_XP_SW_TRIG_INT_OFFS (0x4) -#define ARMADA_370_XP_IN_DRBEL_MSK_OFFS (0xc) -#define ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS (0x8) - -#define ARMADA_370_XP_MAX_PER_CPU_IRQS (28) - -#define ACTIVE_DOORBELLS (8) - -static DEFINE_RAW_SPINLOCK(irq_controller_lock); - -static void __iomem *per_cpu_int_base; -static void __iomem *main_int_base; -static struct irq_domain *armada_370_xp_mpic_domain; - -/* - * In SMP mode: - * For shared global interrupts, mask/unmask global enable bit - * For CPU interrtups, mask/unmask the calling CPU's bit - */ -static void armada_370_xp_irq_mask(struct irq_data *d) -{ -#ifdef CONFIG_SMP - irq_hw_number_t hwirq = irqd_to_hwirq(d); - - if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS) - writel(hwirq, main_int_base + - ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS); - else - writel(hwirq, per_cpu_int_base + - ARMADA_370_XP_INT_SET_MASK_OFFS); -#else - writel(irqd_to_hwirq(d), - per_cpu_int_base + ARMADA_370_XP_INT_SET_MASK_OFFS); -#endif -} - -static void armada_370_xp_irq_unmask(struct irq_data *d) -{ -#ifdef CONFIG_SMP - irq_hw_number_t hwirq = irqd_to_hwirq(d); - - if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS) - writel(hwirq, main_int_base + - ARMADA_370_XP_INT_SET_ENABLE_OFFS); - else - writel(hwirq, per_cpu_int_base + - ARMADA_370_XP_INT_CLEAR_MASK_OFFS); -#else - writel(irqd_to_hwirq(d), - per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS); -#endif -} - -#ifdef CONFIG_SMP -static int armada_xp_set_affinity(struct irq_data *d, - const struct cpumask *mask_val, bool force) -{ - unsigned long reg; - unsigned long new_mask = 0; - unsigned long online_mask = 0; - unsigned long count = 0; - irq_hw_number_t hwirq = irqd_to_hwirq(d); - int cpu; - - for_each_cpu(cpu, mask_val) { - new_mask |= 1 << cpu_logical_map(cpu); - count++; - } - - /* - * Forbid mutlicore interrupt affinity - * This is required since the MPIC HW doesn't limit - * several CPUs from acknowledging the same interrupt. - */ - if (count > 1) - return -EINVAL; - - for_each_cpu(cpu, cpu_online_mask) - online_mask |= 1 << cpu_logical_map(cpu); - - raw_spin_lock(&irq_controller_lock); - - reg = readl(main_int_base + ARMADA_370_XP_INT_SOURCE_CTL(hwirq)); - reg = (reg & (~online_mask)) | new_mask; - writel(reg, main_int_base + ARMADA_370_XP_INT_SOURCE_CTL(hwirq)); - - raw_spin_unlock(&irq_controller_lock); - - return 0; -} -#endif - -static struct irq_chip armada_370_xp_irq_chip = { - .name = "armada_370_xp_irq", - .irq_mask = armada_370_xp_irq_mask, - .irq_mask_ack = armada_370_xp_irq_mask, - .irq_unmask = armada_370_xp_irq_unmask, -#ifdef CONFIG_SMP - .irq_set_affinity = armada_xp_set_affinity, -#endif -}; - -static int armada_370_xp_mpic_irq_map(struct irq_domain *h, - unsigned int virq, irq_hw_number_t hw) -{ - armada_370_xp_irq_mask(irq_get_irq_data(virq)); - writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS); - irq_set_status_flags(virq, IRQ_LEVEL); - - if (hw < ARMADA_370_XP_MAX_PER_CPU_IRQS) { - irq_set_percpu_devid(virq); - irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip, - handle_percpu_devid_irq); - - } else { - irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip, - handle_level_irq); - } - set_irq_flags(virq, IRQF_VALID | IRQF_PROBE); - - return 0; -} - -#ifdef CONFIG_SMP -void armada_mpic_send_doorbell(const struct cpumask *mask, unsigned int irq) -{ - int cpu; - unsigned long map = 0; - - /* Convert our logical CPU mask into a physical one. */ - for_each_cpu(cpu, mask) - map |= 1 << cpu_logical_map(cpu); - - /* - * Ensure that stores to Normal memory are visible to the - * other CPUs before issuing the IPI. - */ - dsb(); - - /* submit softirq */ - writel((map << 8) | irq, main_int_base + - ARMADA_370_XP_SW_TRIG_INT_OFFS); -} - -void armada_xp_mpic_smp_cpu_init(void) -{ - /* Clear pending IPIs */ - writel(0, per_cpu_int_base + ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS); - - /* Enable first 8 IPIs */ - writel((1 << ACTIVE_DOORBELLS) - 1, per_cpu_int_base + - ARMADA_370_XP_IN_DRBEL_MSK_OFFS); - - /* Unmask IPI interrupt */ - writel(0, per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS); -} -#endif /* CONFIG_SMP */ - -static struct irq_domain_ops armada_370_xp_mpic_irq_ops = { - .map = armada_370_xp_mpic_irq_map, - .xlate = irq_domain_xlate_onecell, -}; - -static int __init armada_370_xp_mpic_of_init(struct device_node *node, - struct device_node *parent) -{ - u32 control; - - main_int_base = of_iomap(node, 0); - per_cpu_int_base = of_iomap(node, 1); - - BUG_ON(!main_int_base); - BUG_ON(!per_cpu_int_base); - - control = readl(main_int_base + ARMADA_370_XP_INT_CONTROL); - - armada_370_xp_mpic_domain = - irq_domain_add_linear(node, (control >> 2) & 0x3ff, - &armada_370_xp_mpic_irq_ops, NULL); - - if (!armada_370_xp_mpic_domain) - panic("Unable to add Armada_370_Xp MPIC irq domain (DT)\n"); - - irq_set_default_host(armada_370_xp_mpic_domain); - -#ifdef CONFIG_SMP - armada_xp_mpic_smp_cpu_init(); - - /* - * Set the default affinity from all CPUs to the boot cpu. - * This is required since the MPIC doesn't limit several CPUs - * from acknowledging the same interrupt. - */ - cpumask_clear(irq_default_affinity); - cpumask_set_cpu(smp_processor_id(), irq_default_affinity); - -#endif - - return 0; -} - -asmlinkage void __exception_irq_entry armada_370_xp_handle_irq(struct pt_regs - *regs) -{ - u32 irqstat, irqnr; - - do { - irqstat = readl_relaxed(per_cpu_int_base + - ARMADA_370_XP_CPU_INTACK_OFFS); - irqnr = irqstat & 0x3FF; - - if (irqnr > 1022) - break; - - if (irqnr > 0) { - irqnr = irq_find_mapping(armada_370_xp_mpic_domain, - irqnr); - handle_IRQ(irqnr, regs); - continue; - } -#ifdef CONFIG_SMP - /* IPI Handling */ - if (irqnr == 0) { - u32 ipimask, ipinr; - - ipimask = readl_relaxed(per_cpu_int_base + - ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS) - & 0xFF; - - writel(0x0, per_cpu_int_base + - ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS); - - /* Handle all pending doorbells */ - for (ipinr = 0; ipinr < ACTIVE_DOORBELLS; ipinr++) { - if (ipimask & (0x1 << ipinr)) - handle_IPI(ipinr, regs); - } - continue; - } -#endif - - } while (1); -} - -static const struct of_device_id mpic_of_match[] __initconst = { - {.compatible = "marvell,mpic", .data = armada_370_xp_mpic_of_init}, - {}, -}; - -void __init armada_370_xp_init_irq(void) -{ - of_irq_init(mpic_of_match); -#ifdef CONFIG_CACHE_L2X0 - l2x0_of_init(0, ~0UL); -#endif -} diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 903da8e..cdd05f2 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -55,12 +55,6 @@ config MACH_OMAP_H3 TI OMAP 1710 H3 board support. Say Y here if you have such a board. -config MACH_OMAP_HTCWIZARD - bool "HTC Wizard" - depends on ARCH_OMAP850 - help - HTC Wizard smartphone support (AKA QTEK 9100, ...) - config MACH_HERALD bool "HTC Herald" depends on ARCH_OMAP850 diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index cb7c6ae..6c4f766 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -543,15 +543,6 @@ static struct clk usb_dc_ck = { /* Direct from ULPD, no parent */ .rate = 48000000, .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = USB_REQ_EN_SHIFT, -}; - -static struct clk usb_dc_ck7xx = { - .name = "usb_dc_ck", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 48000000, - .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), .enable_bit = SOFT_USB_OTG_DPLL_REQ_SHIFT, }; @@ -727,8 +718,7 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310), CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310), CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX), - CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX), - CLK(NULL, "usb_dc_ck", &usb_dc_ck7xx, CK_7XX), + CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX | CK_7XX), CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310), CLK(NULL, "mclk", &mclk_16xx, CK_16XX), CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310), diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h index 753cd5c..45e5ac7 100644 --- a/arch/arm/mach-omap1/include/mach/usb.h +++ b/arch/arm/mach-omap1/include/mach/usb.h @@ -2,7 +2,7 @@ * FIXME correct answer depends on hmc_mode, * as does (on omap1) any nonzero value for config->otg port number */ -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) #define is_usb0_device(config) 1 #else #define is_usb0_device(config) 0 diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index 1a1db59..4118db5 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -123,7 +123,7 @@ omap_otg_init(struct omap_usb_config *config) syscon = omap_readl(OTG_SYSCON_1); syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN; -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) if (config->otg || config->register_dev) { struct platform_device *udc_device = config->udc_device; int status; @@ -169,7 +169,7 @@ omap_otg_init(struct omap_usb_config *config) void omap_otg_init(struct omap_usb_config *config) {} #endif -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) static struct resource udc_resources[] = { /* order is significant! */ @@ -600,7 +600,7 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config) while (!(omap_readw(ULPD_DPLL_CTRL) & DPLL_LOCK)) cpu_relax(); -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) if (config->register_dev) { int status; diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 8111cd9..b9c0ed3 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -408,7 +408,7 @@ config OMAP3_SDRC_AC_TIMING config OMAP4_ERRATA_I688 bool "OMAP4 errata: Async Bridge Corruption" - depends on ARCH_OMAP4 && !ARCH_MULTIPLATFORM + depends on (ARCH_OMAP4 || SOC_OMAP5) && !ARCH_MULTIPLATFORM select ARCH_HAS_BARRIERS help If a data is stalled inside asynchronous bridge because of back diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index b068b7f..62bb352 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -229,7 +229,6 @@ obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o -obj-$(CONFIG_MACH_ENCORE) += board-omap3encore.o obj-$(CONFIG_MACH_OVERO) += board-overo.o obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o @@ -255,8 +254,6 @@ obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o -obj-$(CONFIG_MACH_PCM049) += board-omap4pcm049.o - obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index e551aae..244d8a5 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -135,7 +135,7 @@ static struct omap_dss_board_info sdp2430_dss_data = { .default_device = &sdp2430_lcd_device, }; -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) static struct omap_smc91x_platform_data board_smc91x_data = { .cs = 5, diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 35f3ad0..00d7290 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -291,6 +291,10 @@ static struct platform_device sdp4430_leds_pwm = { }, }; +/* Dummy regulator for pwm-backlight driver */ +static struct regulator_consumer_supply backlight_supply = + REGULATOR_SUPPLY("enable", "pwm-backlight"); + static struct platform_pwm_backlight_data sdp4430_backlight_data = { .max_brightness = 127, .dft_brightness = 127, @@ -718,6 +722,8 @@ static void __init omap_4430sdp_init(void) omap4_i2c_init(); omap_sfh7741prox_init(); + regulator_register_always_on(0, "backlight-enable", + &backlight_supply, 1, 0); platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); omap_serial_init(); omap_sdrc_init(NULL, NULL); diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 0c1bdd7..69c0acf 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -246,7 +246,7 @@ static u32 is_gpmc_muxed(void) return 0; } -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) static struct omap_smc91x_platform_data board_smc91x_data = { .cs = 1, diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 3a077df..1a88467 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -547,12 +547,16 @@ static struct regulator_consumer_supply rx51_vio_supplies[] = { REGULATOR_SUPPLY("DVDD", "2-0019"), /* Si4713 IO supply */ REGULATOR_SUPPLY("vio", "2-0063"), + /* lis3lv02d */ + REGULATOR_SUPPLY("Vdd_IO", "3-001d"), }; static struct regulator_consumer_supply rx51_vaux1_consumers[] = { REGULATOR_SUPPLY("vdds_sdi", "omapdss"), /* Si4713 supply */ REGULATOR_SUPPLY("vdd", "2-0063"), + /* lis3lv02d */ + REGULATOR_SUPPLY("Vdd", "3-001d"), }; static struct regulator_init_data rx51_vaux1 = { diff --git a/arch/arm/mach-omap2/cclock33xx_data.c b/arch/arm/mach-omap2/cclock33xx_data.c index 476b820..7f091c8 100644 --- a/arch/arm/mach-omap2/cclock33xx_data.c +++ b/arch/arm/mach-omap2/cclock33xx_data.c @@ -958,6 +958,14 @@ int __init am33xx_clk_init(void) clk_set_parent(&timer3_fck, &sys_clkin_ck); clk_set_parent(&timer6_fck, &sys_clkin_ck); + /* + * The On-Chip 32K RC Osc clock is not an accurate clock-source as per + * the design/spec, so as a result, for example, timer which supposed + * to get expired @60Sec, but will expire somewhere ~@40Sec, which is + * not expected by any use-case, so change WDT1 clock source to PRCM + * 32KHz clock. + */ + clk_set_parent(&wdt1_fck, &clkdiv32k_ick); return 0; } diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c index 3d58f33..0c6834a 100644 --- a/arch/arm/mach-omap2/cclock44xx_data.c +++ b/arch/arm/mach-omap2/cclock44xx_data.c @@ -52,6 +52,13 @@ */ #define OMAP4_DPLL_ABE_DEFFREQ 98304000 +/* + * OMAP4 USB DPLL default frequency. In OMAP4430 TRM version V, section + * "3.6.3.9.5 DPLL_USB Preferred Settings" shows that the preferred + * locked frequency for the USB DPLL is 960MHz. + */ +#define OMAP4_DPLL_USB_DEFFREQ 960000000 + /* Root clocks */ DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0); @@ -1011,6 +1018,10 @@ DEFINE_CLK_OMAP_MUX(hsmmc2_fclk, "l3_init_clkdm", hsmmc1_fclk_sel, OMAP4430_CM_L3INIT_MMC2_CLKCTRL, OMAP4430_CLKSEL_MASK, hsmmc1_fclk_parents, func_dmic_abe_gfclk_ops); +DEFINE_CLK_GATE(ocp2scp_usb_phy_phy_48m, "func_48m_fclk", &func_48m_fclk, 0x0, + OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, + OMAP4430_OPTFCLKEN_PHY_48M_SHIFT, 0x0, NULL); + DEFINE_CLK_GATE(sha2md5_fck, "l3_div_ck", &l3_div_ck, 0x0, OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL, OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); @@ -1538,6 +1549,7 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "per_mcbsp4_gfclk", &per_mcbsp4_gfclk, CK_443X), CLK(NULL, "hsmmc1_fclk", &hsmmc1_fclk, CK_443X), CLK(NULL, "hsmmc2_fclk", &hsmmc2_fclk, CK_443X), + CLK(NULL, "ocp2scp_usb_phy_phy_48m", &ocp2scp_usb_phy_phy_48m, CK_443X), CLK(NULL, "sha2md5_fck", &sha2md5_fck, CK_443X), CLK(NULL, "slimbus1_fclk_1", &slimbus1_fclk_1, CK_443X), CLK(NULL, "slimbus1_fclk_0", &slimbus1_fclk_0, CK_443X), @@ -1705,5 +1717,13 @@ int __init omap4xxx_clk_init(void) if (rc) pr_err("%s: failed to configure ABE DPLL!\n", __func__); + /* + * Lock USB DPLL on OMAP4 devices so that the L3INIT power + * domain can transition to retention state when not in use. + */ + rc = clk_set_rate(&dpll_usb_ck, OMAP4_DPLL_USB_DEFFREQ); + if (rc) + pr_err("%s: failed to configure USB DPLL!\n", __func__); + return 0; } diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 40f4a03..d6ba13e 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -293,5 +293,8 @@ extern void omap_reserve(void); struct omap_hwmod; extern int omap_dss_reset(struct omap_hwmod *); +/* SoC specific clock initializer */ +extern int (*omap_clk_init)(void); + #endif /* __ASSEMBLER__ */ #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */ diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index 3aed4b0..3a0296c 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -307,10 +307,10 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel) _omap3_noncore_dpll_bypass(clk); /* - * Set jitter correction. No jitter correction for OMAP4 and 3630 - * since freqsel field is no longer present + * Set jitter correction. Jitter correction applicable for OMAP343X + * only since freqsel field is no longer present on other devices. */ - if (!soc_is_am33xx() && !cpu_is_omap44xx() && !cpu_is_omap3630()) { + if (cpu_is_omap343x()) { v = __raw_readl(dd->control_reg); v &= ~dd->freqsel_mask; v |= freqsel << __ffs(dd->freqsel_mask); @@ -480,29 +480,30 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, if (!dd) return -EINVAL; - __clk_prepare(dd->clk_bypass); - clk_enable(dd->clk_bypass); - __clk_prepare(dd->clk_ref); - clk_enable(dd->clk_ref); - if (__clk_get_rate(dd->clk_bypass) == rate && (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) { pr_debug("%s: %s: set rate: entering bypass.\n", __func__, __clk_get_name(hw->clk)); + __clk_prepare(dd->clk_bypass); + clk_enable(dd->clk_bypass); ret = _omap3_noncore_dpll_bypass(clk); if (!ret) new_parent = dd->clk_bypass; + clk_disable(dd->clk_bypass); + __clk_unprepare(dd->clk_bypass); } else { + __clk_prepare(dd->clk_ref); + clk_enable(dd->clk_ref); + if (dd->last_rounded_rate != rate) rate = __clk_round_rate(hw->clk, rate); if (dd->last_rounded_rate == 0) return -EINVAL; - /* No freqsel on AM335x, OMAP4 and OMAP3630 */ - if (!soc_is_am33xx() && !cpu_is_omap44xx() && - !cpu_is_omap3630()) { + /* Freqsel is available only on OMAP343X devices */ + if (cpu_is_omap343x()) { freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n); WARN_ON(!freqsel); @@ -514,6 +515,8 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, ret = omap3_noncore_dpll_program(clk, freqsel); if (!ret) new_parent = dd->clk_ref; + clk_disable(dd->clk_ref); + __clk_unprepare(dd->clk_ref); } /* * FIXME - this is all wrong. common code handles reparenting and @@ -525,11 +528,6 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, if (!ret) __clk_reparent(hw->clk, new_parent); - clk_disable(dd->clk_ref); - __clk_unprepare(dd->clk_ref); - clk_disable(dd->clk_bypass); - __clk_unprepare(dd->clk_bypass); - return 0; } diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c index b155500..b8208b4 100644 --- a/arch/arm/mach-omap2/dsp.c +++ b/arch/arm/mach-omap2/dsp.c @@ -26,7 +26,7 @@ #include "control.h" #include "cm2xxx_3xxx.h" #include "prm2xxx_3xxx.h" -#ifdef CONFIG_BRIDGE_DVFS +#ifdef CONFIG_TIDSPBRIDGE_DVFS #include "omap-pm.h" #endif @@ -35,7 +35,7 @@ static struct platform_device *omap_dsp_pdev; static struct omap_dsp_platform_data omap_dsp_pdata __initdata = { -#ifdef CONFIG_BRIDGE_DVFS +#ifdef CONFIG_TIDSPBRIDGE_DVFS .dsp_set_min_opp = omap_pm_dsp_set_min_opp, .dsp_get_opp = omap_pm_dsp_get_opp, .cpu_set_freq = omap_pm_cpu_set_freq, diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 8a68f1e..ff0bc9e 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -529,22 +529,28 @@ void __init omap5xxx_check_revision(void) case 0xb942: switch (rev) { case 0: - default: omap_revision = OMAP5430_REV_ES1_0; + break; + case 1: + default: + omap_revision = OMAP5430_REV_ES2_0; } break; case 0xb998: switch (rev) { case 0: - default: omap_revision = OMAP5432_REV_ES1_0; + break; + case 1: + default: + omap_revision = OMAP5432_REV_ES2_0; } break; default: /* Unknown default to latest silicon rev as default*/ - omap_revision = OMAP5430_REV_ES1_0; + omap_revision = OMAP5430_REV_ES2_0; } pr_info("OMAP%04x ES%d.0\n", diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 2c3fdd6..e210fa8 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -55,6 +55,12 @@ #include "prm44xx.h" /* + * omap_clk_init: points to a function that does the SoC-specific + * clock initializations + */ +int (*omap_clk_init)(void); + +/* * The machine specific code may provide the extra mapping besides the * default mapping provided here. */ @@ -271,6 +277,14 @@ static struct map_desc omap54xx_io_desc[] __initdata = { .length = L4_PER_54XX_SIZE, .type = MT_DEVICE, }, +#ifdef CONFIG_OMAP4_ERRATA_I688 + { + .virtual = OMAP4_SRAM_VA, + .pfn = __phys_to_pfn(OMAP4_SRAM_PA), + .length = PAGE_SIZE, + .type = MT_MEMORY_SO, + }, +#endif }; #endif @@ -323,6 +337,7 @@ void __init omap4_map_io(void) void __init omap5_map_io(void) { iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc)); + omap_barriers_init(); } #endif /* @@ -397,7 +412,7 @@ void __init omap2420_init_early(void) omap242x_clockdomains_init(); omap2420_hwmod_init(); omap_hwmod_init_postsetup(); - omap2420_clk_init(); + omap_clk_init = omap2420_clk_init; } void __init omap2420_init_late(void) @@ -427,7 +442,7 @@ void __init omap2430_init_early(void) omap243x_clockdomains_init(); omap2430_hwmod_init(); omap_hwmod_init_postsetup(); - omap2430_clk_init(); + omap_clk_init = omap2430_clk_init; } void __init omap2430_init_late(void) @@ -462,7 +477,7 @@ void __init omap3_init_early(void) omap3xxx_clockdomains_init(); omap3xxx_hwmod_init(); omap_hwmod_init_postsetup(); - omap3xxx_clk_init(); + omap_clk_init = omap3xxx_clk_init; } void __init omap3430_init_early(void) @@ -500,7 +515,7 @@ void __init ti81xx_init_early(void) omap3xxx_clockdomains_init(); omap3xxx_hwmod_init(); omap_hwmod_init_postsetup(); - omap3xxx_clk_init(); + omap_clk_init = omap3xxx_clk_init; } void __init omap3_init_late(void) @@ -568,7 +583,7 @@ void __init am33xx_init_early(void) am33xx_clockdomains_init(); am33xx_hwmod_init(); omap_hwmod_init_postsetup(); - am33xx_clk_init(); + omap_clk_init = am33xx_clk_init; } #endif @@ -593,7 +608,7 @@ void __init omap4430_init_early(void) omap44xx_clockdomains_init(); omap44xx_hwmod_init(); omap_hwmod_init_postsetup(); - omap4xxx_clk_init(); + omap_clk_init = omap4xxx_clk_init; } void __init omap4430_init_late(void) diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 708bb11..2aeb928 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -240,15 +240,21 @@ void __iomem *omap4_get_sar_ram_base(void) */ static int __init omap4_sar_ram_init(void) { + unsigned long sar_base; + /* * To avoid code running on other OMAPs in * multi-omap builds */ - if (!cpu_is_omap44xx()) + if (cpu_is_omap44xx()) + sar_base = OMAP44XX_SAR_RAM_BASE; + else if (soc_is_omap54xx()) + sar_base = OMAP54XX_SAR_RAM_BASE; + else return -ENOMEM; /* Static mapping, never released */ - sar_ram_base = ioremap(OMAP44XX_SAR_RAM_BASE, SZ_16K); + sar_ram_base = ioremap(sar_base, SZ_16K); if (WARN_ON(!sar_ram_base)) return -ENOMEM; diff --git a/arch/arm/mach-omap2/omap4-sar-layout.h b/arch/arm/mach-omap2/omap4-sar-layout.h index e170fe8..9374175 100644 --- a/arch/arm/mach-omap2/omap4-sar-layout.h +++ b/arch/arm/mach-omap2/omap4-sar-layout.h @@ -48,13 +48,13 @@ #define SAR_BACKUP_STATUS_WAKEUPGEN 0x10 /* WakeUpGen save restore offset from OMAP54XX_SAR_RAM_BASE */ -#define OMAP5_WAKEUPGENENB_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x8d4) -#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x8e8) -#define OMAP5_WAKEUPGENENB_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0x8fc) -#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0x910) -#define OMAP5_AUXCOREBOOT0_OFFSET (SAR_BANK3_OFFSET + 0x924) -#define OMAP5_AUXCOREBOOT1_OFFSET (SAR_BANK3_OFFSET + 0x928) -#define OMAP5_AMBA_IF_MODE_OFFSET (SAR_BANK3_OFFSET + 0x92c) +#define OMAP5_WAKEUPGENENB_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x9dc) +#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x9f0) +#define OMAP5_WAKEUPGENENB_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0xa04) +#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0xa18) +#define OMAP5_AUXCOREBOOT0_OFFSET (SAR_BANK3_OFFSET + 0xa2c) +#define OMAP5_AUXCOREBOOT1_OFFSET (SAR_BANK3_OFFSET + 0x930) +#define OMAP5_AMBA_IF_MODE_OFFSET (SAR_BANK3_OFFSET + 0xa34) #define OMAP5_SAR_BACKUP_STATUS_OFFSET (SAR_BANK3_OFFSET + 0x800) #endif diff --git a/arch/arm/mach-omap2/omap54xx.h b/arch/arm/mach-omap2/omap54xx.h index a2582bb..a086ba1 100644 --- a/arch/arm/mach-omap2/omap54xx.h +++ b/arch/arm/mach-omap2/omap54xx.h @@ -28,5 +28,6 @@ #define OMAP54XX_PRCM_MPU_BASE 0x48243000 #define OMAP54XX_SCM_BASE 0x4a002000 #define OMAP54XX_CTRL_BASE 0x4a002800 +#define OMAP54XX_SAR_RAM_BASE 0x4ae26000 #endif /* __ASM_SOC_OMAP555554XX_H */ diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index c2c798c..5f33c2d 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -610,8 +610,6 @@ static int _enable_wakeup(struct omap_hwmod *oh, u32 *v) /* XXX test pwrdm_get_wken for this hwmod's subsystem */ - oh->_int_flags |= _HWMOD_WAKEUP_ENABLED; - return 0; } @@ -645,8 +643,6 @@ static int _disable_wakeup(struct omap_hwmod *oh, u32 *v) /* XXX test pwrdm_get_wken for this hwmod's subsystem */ - oh->_int_flags &= ~_HWMOD_WAKEUP_ENABLED; - return 0; } @@ -1368,7 +1364,9 @@ static void _enable_sysc(struct omap_hwmod *oh) } if (sf & SYSC_HAS_MIDLEMODE) { - if (oh->flags & HWMOD_SWSUP_MSTANDBY) { + if (oh->flags & HWMOD_FORCE_MSTANDBY) { + idlemode = HWMOD_IDLEMODE_FORCE; + } else if (oh->flags & HWMOD_SWSUP_MSTANDBY) { idlemode = HWMOD_IDLEMODE_NO; } else { if (sf & SYSC_HAS_ENAWAKEUP) @@ -1440,7 +1438,8 @@ static void _idle_sysc(struct omap_hwmod *oh) } if (sf & SYSC_HAS_MIDLEMODE) { - if (oh->flags & HWMOD_SWSUP_MSTANDBY) { + if ((oh->flags & HWMOD_SWSUP_MSTANDBY) || + (oh->flags & HWMOD_FORCE_MSTANDBY)) { idlemode = HWMOD_IDLEMODE_FORCE; } else { if (sf & SYSC_HAS_ENAWAKEUP) diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index d43d9b6..fe59629 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -427,8 +427,8 @@ struct omap_hwmod_omap4_prcm { * * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out * of idle, rather than relying on module smart-idle - * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out - * of standby, rather than relying on module smart-standby + * HWMOD_SWSUP_MSTANDBY: omap_hwmod code should manually bring module in and + * out of standby, rather than relying on module smart-standby * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for * SDRAM controller, etc. XXX probably belongs outside the main hwmod file * XXX Should be HWMOD_SETUP_NO_RESET @@ -459,6 +459,10 @@ struct omap_hwmod_omap4_prcm { * correctly, or this is being abused to deal with some PM latency * issues -- but we're currently suffering from a shortage of * folks who are able to track these issues down properly. + * HWMOD_FORCE_MSTANDBY: Always keep MIDLEMODE bits cleared so that device + * is kept in force-standby mode. Failing to do so causes PM problems + * with musb on OMAP3630 at least. Note that musb has a dedicated register + * to control MSTANDBY signal when MIDLEMODE is set to force-standby. */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -471,21 +475,20 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_16BIT_REG (1 << 8) #define HWMOD_EXT_OPT_MAIN_CLK (1 << 9) #define HWMOD_BLOCK_WFI (1 << 10) +#define HWMOD_FORCE_MSTANDBY (1 << 11) /* * omap_hwmod._int_flags definitions * These are for internal use only and are managed by the omap_hwmod code. * * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module - * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached * _HWMOD_SKIP_ENABLE: set if hwmod enabled during init (HWMOD_INIT_NO_IDLE) - * causes the first call to _enable() to only update the pinmux */ #define _HWMOD_NO_MPU_PORT (1 << 0) -#define _HWMOD_WAKEUP_ENABLED (1 << 1) -#define _HWMOD_SYSCONFIG_LOADED (1 << 2) -#define _HWMOD_SKIP_ENABLE (1 << 3) +#define _HWMOD_SYSCONFIG_LOADED (1 << 1) +#define _HWMOD_SKIP_ENABLE (1 << 2) /* * omap_hwmod._state definitions diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 26eee4a..31bea1c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -28,6 +28,7 @@ #include "prm-regbits-33xx.h" #include "i2c.h" #include "mmc.h" +#include "wd_timer.h" /* * IP blocks @@ -2087,8 +2088,21 @@ static struct omap_hwmod am33xx_uart6_hwmod = { }; /* 'wd_timer' class */ +static struct omap_hwmod_class_sysconfig wdt_sysc = { + .rev_offs = 0x0, + .sysc_offs = 0x10, + .syss_offs = 0x14, + .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + static struct omap_hwmod_class am33xx_wd_timer_hwmod_class = { .name = "wd_timer", + .sysc = &wdt_sysc, + .pre_shutdown = &omap2_wd_timer_disable, }; /* @@ -2099,6 +2113,7 @@ static struct omap_hwmod am33xx_wd_timer1_hwmod = { .name = "wd_timer2", .class = &am33xx_wd_timer_hwmod_class, .clkdm_name = "l4_wkup_clkdm", + .flags = HWMOD_SWSUP_SIDLE, .main_clk = "wdt1_fck", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index ac7e03e..5112d04 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1707,9 +1707,14 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = { * Erratum ID: i479 idle_req / idle_ack mechanism potentially * broken when autoidle is enabled * workaround is to disable the autoidle bit at module level. + * + * Enabling the device in any other MIDLEMODE setting but force-idle + * causes core_pwrdm not enter idle states at least on OMAP3630. + * Note that musb has OTG_FORCESTDBY register that controls MSTANDBY + * signal when MIDLEMODE is set to force-idle. */ .flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE - | HWMOD_SWSUP_MSTANDBY, + | HWMOD_FORCE_MSTANDBY, }; /* usb_otg_hs */ diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 0e47d2e..9e05765 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2714,6 +2714,10 @@ static struct omap_ocp2scp_dev ocp2scp_dev_attr[] = { { } }; +static struct omap_hwmod_opt_clk ocp2scp_usb_phy_opt_clks[] = { + { .role = "48mhz", .clk = "ocp2scp_usb_phy_phy_48m" }, +}; + /* ocp2scp_usb_phy */ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = { .name = "ocp2scp_usb_phy", @@ -2728,6 +2732,8 @@ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = { }, }, .dev_attr = ocp2scp_dev_attr, + .opt_clks = ocp2scp_usb_phy_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(ocp2scp_usb_phy_opt_clks), }; /* diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 8e61d80..89cad4a 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -52,7 +52,6 @@ enum { #define ALREADYACTIVE_SWITCH 0 #define FORCEWAKEUP_SWITCH 1 #define LOWPOWERSTATE_SWITCH 2 -#define ERROR_SWITCH 3 /* pwrdm_list contains all registered struct powerdomains */ static LIST_HEAD(pwrdm_list); @@ -233,10 +232,7 @@ static u8 _pwrdm_save_clkdm_state_and_activate(struct powerdomain *pwrdm, { u8 sleep_switch; - if (curr_pwrst < 0) { - WARN_ON(1); - sleep_switch = ERROR_SWITCH; - } else if (curr_pwrst < PWRDM_POWER_ON) { + if (curr_pwrst < PWRDM_POWER_ON) { if (curr_pwrst > pwrst && pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE && arch_pwrdm->pwrdm_set_lowpwrstchange) { @@ -1091,7 +1087,8 @@ int pwrdm_post_transition(struct powerdomain *pwrdm) */ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst) { - u8 curr_pwrst, next_pwrst, sleep_switch; + u8 next_pwrst, sleep_switch; + int curr_pwrst; int ret = 0; bool hwsup = false; @@ -1107,16 +1104,17 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst) pwrdm_lock(pwrdm); curr_pwrst = pwrdm_read_pwrst(pwrdm); + if (curr_pwrst < 0) { + ret = -EINVAL; + goto osps_out; + } + next_pwrst = pwrdm_read_next_pwrst(pwrdm); if (curr_pwrst == pwrst && next_pwrst == pwrst) goto osps_out; sleep_switch = _pwrdm_save_clkdm_state_and_activate(pwrdm, curr_pwrst, pwrst, &hwsup); - if (sleep_switch == ERROR_SWITCH) { - ret = -EINVAL; - goto osps_out; - } ret = pwrdm_set_next_pwrst(pwrdm, pwrst); if (ret) diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index d35f98a..415c7e0 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -81,13 +81,13 @@ static struct prm_reset_src_map omap44xx_prm_reset_src_map[] = { /* Read a register in a CM/PRM instance in the PRM module */ u32 omap4_prm_read_inst_reg(s16 inst, u16 reg) { - return __raw_readl(OMAP44XX_PRM_REGADDR(inst, reg)); + return __raw_readl(prm_base + inst + reg); } /* Write into a register in a CM/PRM instance in the PRM module */ void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 reg) { - __raw_writel(val, OMAP44XX_PRM_REGADDR(inst, reg)); + __raw_writel(val, prm_base + inst + reg); } /* Read-modify-write a register in a PRM module. Caller must lock */ @@ -650,7 +650,7 @@ static struct prm_ll_data omap44xx_prm_ll_data = { int __init omap44xx_prm_init(void) { - if (!cpu_is_omap44xx()) + if (!cpu_is_omap44xx() && !soc_is_omap54xx()) return 0; return prm_register(&omap44xx_prm_ll_data); diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index c62116b..18fdeeb 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -413,7 +413,9 @@ IS_OMAP_TYPE(3430, 0x3430) #define OMAP54XX_CLASS 0x54000054 #define OMAP5430_REV_ES1_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8)) +#define OMAP5430_REV_ES2_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x20 << 8)) #define OMAP5432_REV_ES1_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8)) +#define OMAP5432_REV_ES2_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x20 << 8)) void omap2xxx_check_revision(void); void omap3xxx_check_revision(void); diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 2bdd4cf..d00d89c 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -62,6 +62,7 @@ #define OMAP2_MPU_SOURCE "sys_ck" #define OMAP3_MPU_SOURCE OMAP2_MPU_SOURCE #define OMAP4_MPU_SOURCE "sys_clkin_ck" +#define OMAP5_MPU_SOURCE "sys_clkin" #define OMAP2_32K_SOURCE "func_32k_ck" #define OMAP3_32K_SOURCE "omap_32k_fck" #define OMAP4_32K_SOURCE "sys_32k_ck" @@ -487,7 +488,7 @@ static void __init realtime_counter_init(void) pr_err("%s: ioremap failed\n", __func__); return; } - sys_clk = clk_get(NULL, "sys_clkin_ck"); + sys_clk = clk_get(NULL, OMAP5_MPU_SOURCE); if (IS_ERR(sys_clk)) { pr_err("%s: failed to get system clock handle\n", __func__); iounmap(base); @@ -547,6 +548,8 @@ static inline void __init realtime_counter_init(void) clksrc_nr, clksrc_src) \ void __init omap##name##_gptimer_timer_init(void) \ { \ + if (omap_clk_init) \ + omap_clk_init(); \ omap_dmtimer_init(); \ omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src); \ @@ -556,6 +559,8 @@ void __init omap##name##_gptimer_timer_init(void) \ clksrc_nr, clksrc_src) \ void __init omap##name##_sync32k_timer_init(void) \ { \ + if (omap_clk_init) \ + omap_clk_init(); \ omap_dmtimer_init(); \ omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ /* Enable the use of clocksource="gp_timer" kernel parameter */ \ @@ -616,7 +621,7 @@ void __init omap4_local_timer_init(void) #ifdef CONFIG_SOC_OMAP5 OMAP_SYS_32K_TIMER_INIT(5, 1, OMAP4_32K_SOURCE, "ti,timer-alwon", - 2, OMAP4_MPU_SOURCE); + 2, OMAP5_MPU_SOURCE); void __init omap5_realtime_timer_init(void) { int err; diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 051b62c..7f2cb6c 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -81,7 +81,6 @@ static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = { #endif struct mmci_platform_data mop500_sdi0_data = { - .ios_handler = mop500_sdi0_ios_handler, .ocr_mask = MMC_VDD_29_30, .f_max = 50000000, .capabilities = MMC_CAP_4_BIT_DATA | diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index b034578..87d2d7b 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/platform_device.h> +#include <linux/clk.h> #include <linux/io.h> #include <linux/i2c.h> #include <linux/platform_data/i2c-nomadik.h> @@ -439,6 +440,15 @@ static void mop500_prox_deactivate(struct device *dev) regulator_put(prox_regulator); } +void mop500_snowball_ethernet_clock_enable(void) +{ + struct clk *clk; + + clk = clk_get_sys("fsmc", NULL); + if (!IS_ERR(clk)) + clk_prepare_enable(clk); +} + static struct cryp_platform_data u8500_cryp1_platform_data = { .mem_to_engine = { .dir = STEDMA40_MEM_TO_PERIPH, @@ -683,6 +693,8 @@ static void __init snowball_init_machine(void) mop500_audio_init(parent); mop500_uart_init(parent); + mop500_snowball_ethernet_clock_enable(); + /* This board has full regulator constraints */ regulator_has_full_constraints(); } diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index eaa605f..d38951b 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -104,6 +104,7 @@ void __init mop500_pinmaps_init(void); void __init snowball_pinmaps_init(void); void __init hrefv60_pinmaps_init(void); void mop500_audio_init(struct device *parent); +void mop500_snowball_ethernet_clock_enable(void); int __init mop500_uib_init(void); void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info, diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 19235cf..f1a5818 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -312,9 +312,10 @@ static void __init u8500_init_machine(void) /* Pinmaps must be in place before devices register */ if (of_machine_is_compatible("st-ericsson,mop500")) mop500_pinmaps_init(); - else if (of_machine_is_compatible("calaosystems,snowball-a9500")) + else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { snowball_pinmaps_init(); - else if (of_machine_is_compatible("st-ericsson,hrefv60+")) + mop500_snowball_ethernet_clock_enable(); + } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) hrefv60_pinmaps_init(); else if (of_machine_is_compatible("st-ericsson,ccu9540")) {} /* TODO: Add pinmaps for ccu9540 board. */ diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index c2f3739..c465fac 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -299,7 +299,7 @@ static void l2x0_unlock(u32 cache_id) int lockregs; int i; - switch (cache_id) { + switch (cache_id & L2X0_CACHE_ID_PART_MASK) { case L2X0_CACHE_ID_PART_L310: lockregs = 8; break; @@ -333,15 +333,14 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) if (cache_id_part_number_from_dt) cache_id = cache_id_part_number_from_dt; else - cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID) - & L2X0_CACHE_ID_PART_MASK; + cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID); aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); aux &= aux_mask; aux |= aux_val; /* Determine the number of ways */ - switch (cache_id) { + switch (cache_id & L2X0_CACHE_ID_PART_MASK) { case L2X0_CACHE_ID_PART_L310: if (aux & (1 << 16)) ways = 16; @@ -725,7 +724,6 @@ static const struct l2x0_of_data pl310_data = { .flush_all = l2x0_flush_all, .inv_all = l2x0_inv_all, .disable = l2x0_disable, - .set_debug = pl310_set_debug, }, }; @@ -814,9 +812,8 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask) data->save(); of_init = true; - l2x0_init(l2x0_base, aux_val, aux_mask); - memcpy(&outer_cache, &data->outer_cache, sizeof(outer_cache)); + l2x0_init(l2x0_base, aux_val, aux_mask); return 0; } diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index a5a4b2bc..2ac3737 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -48,7 +48,7 @@ static DEFINE_RAW_SPINLOCK(cpu_asid_lock); static atomic64_t asid_generation = ATOMIC64_INIT(ASID_FIRST_VERSION); static DECLARE_BITMAP(asid_map, NUM_USER_ASIDS); -static DEFINE_PER_CPU(atomic64_t, active_asids); +DEFINE_PER_CPU(atomic64_t, active_asids); static DEFINE_PER_CPU(u64, reserved_asids); static cpumask_t tlb_flush_pending; @@ -215,6 +215,7 @@ void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk) if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending)) { local_flush_bp_all(); local_flush_tlb_all(); + dummy_flush_tlb_a15_erratum(); } atomic64_set(&per_cpu(active_asids, cpu), asid); diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index e95a996..7897894 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -598,39 +598,60 @@ static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr, } while (pte++, addr += PAGE_SIZE, addr != end); } -static void __init alloc_init_section(pud_t *pud, unsigned long addr, - unsigned long end, phys_addr_t phys, - const struct mem_type *type) +static void __init map_init_section(pmd_t *pmd, unsigned long addr, + unsigned long end, phys_addr_t phys, + const struct mem_type *type) { - pmd_t *pmd = pmd_offset(pud, addr); - +#ifndef CONFIG_ARM_LPAE /* - * Try a section mapping - end, addr and phys must all be aligned - * to a section boundary. Note that PMDs refer to the individual - * L1 entries, whereas PGDs refer to a group of L1 entries making - * up one logical pointer to an L2 table. + * In classic MMU format, puds and pmds are folded in to + * the pgds. pmd_offset gives the PGD entry. PGDs refer to a + * group of L1 entries making up one logical pointer to + * an L2 table (2MB), where as PMDs refer to the individual + * L1 entries (1MB). Hence increment to get the correct + * offset for odd 1MB sections. + * (See arch/arm/include/asm/pgtable-2level.h) */ - if (type->prot_sect && ((addr | end | phys) & ~SECTION_MASK) == 0) { - pmd_t *p = pmd; - -#ifndef CONFIG_ARM_LPAE - if (addr & SECTION_SIZE) - pmd++; + if (addr & SECTION_SIZE) + pmd++; #endif + do { + *pmd = __pmd(phys | type->prot_sect); + phys += SECTION_SIZE; + } while (pmd++, addr += SECTION_SIZE, addr != end); - do { - *pmd = __pmd(phys | type->prot_sect); - phys += SECTION_SIZE; - } while (pmd++, addr += SECTION_SIZE, addr != end); + flush_pmd_entry(pmd); +} - flush_pmd_entry(p); - } else { +static void __init alloc_init_pmd(pud_t *pud, unsigned long addr, + unsigned long end, phys_addr_t phys, + const struct mem_type *type) +{ + pmd_t *pmd = pmd_offset(pud, addr); + unsigned long next; + + do { /* - * No need to loop; pte's aren't interested in the - * individual L1 entries. + * With LPAE, we must loop over to map + * all the pmds for the given range. */ - alloc_init_pte(pmd, addr, end, __phys_to_pfn(phys), type); - } + next = pmd_addr_end(addr, end); + + /* + * Try a section mapping - addr, next and phys must all be + * aligned to a section boundary. + */ + if (type->prot_sect && + ((addr | next | phys) & ~SECTION_MASK) == 0) { + map_init_section(pmd, addr, next, phys, type); + } else { + alloc_init_pte(pmd, addr, next, + __phys_to_pfn(phys), type); + } + + phys += next - addr; + + } while (pmd++, addr = next, addr != end); } static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr, @@ -641,7 +662,7 @@ static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr, do { next = pud_addr_end(addr, end); - alloc_init_section(pud, addr, next, phys, type); + alloc_init_pmd(pud, addr, next, phys, type); phys += next - addr; } while (pud++, addr = next, addr != end); } diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 3a3c015..f584d3f 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -420,7 +420,7 @@ __v7_pj4b_proc_info: __v7_ca7mp_proc_info: .long 0x410fc070 .long 0xff0ffff0 - __v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV + __v7_proc __v7_ca7mp_setup .size __v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info /* @@ -430,10 +430,25 @@ __v7_ca7mp_proc_info: __v7_ca15mp_proc_info: .long 0x410fc0f0 .long 0xff0ffff0 - __v7_proc __v7_ca15mp_setup, hwcaps = HWCAP_IDIV + __v7_proc __v7_ca15mp_setup .size __v7_ca15mp_proc_info, . - __v7_ca15mp_proc_info /* + * Qualcomm Inc. Krait processors. + */ + .type __krait_proc_info, #object +__krait_proc_info: + .long 0x510f0400 @ Required ID value + .long 0xff0ffc00 @ Mask for ID + /* + * Some Krait processors don't indicate support for SDIV and UDIV + * instructions in the ARM instruction set, even though they actually + * do support them. + */ + __v7_proc __v7_setup, hwcaps = HWCAP_IDIV + .size __krait_proc_info, . - __krait_proc_info + + /* * Match any ARMv7 processor core. */ .type __v7_proc_info, #object |