aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/host')
-rw-r--r--drivers/mmc/host/Kconfig20
-rw-r--r--drivers/mmc/host/dw_mmc-pltfm.c7
-rw-r--r--drivers/mmc/host/mmci.c306
-rw-r--r--drivers/mmc/host/mmci.h3
-rw-r--r--drivers/mmc/host/mxs-mmc.c6
-rw-r--r--drivers/mmc/host/rtsx_pci_sdmmc.c30
-rw-r--r--drivers/mmc/host/sdhci-s3c.c7
7 files changed, 206 insertions, 173 deletions
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 3004127..3be8b94 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -69,7 +69,7 @@ config MMC_SDHCI_PCI
If unsure, say N.
config MMC_RICOH_MMC
- bool "Ricoh MMC Controller Disabler (EXPERIMENTAL)"
+ bool "Ricoh MMC Controller Disabler"
depends on MMC_SDHCI_PCI
help
This adds a pci quirk to disable Ricoh MMC Controller. This
@@ -186,9 +186,6 @@ config MMC_SDHCI_S3C
often referrered to as the HSMMC block in some of the Samsung S3C
range of SoC.
- Note, due to the problems with DMA, the DMA support is only
- available with CONFIG_EXPERIMENTAL is selected.
-
If you have a controller with this interface, say Y or M here.
If unsure, say N.
@@ -233,7 +230,7 @@ config MMC_SDHCI_SPEAR
config MMC_SDHCI_S3C_DMA
bool "DMA support on S3C SDHCI"
- depends on MMC_SDHCI_S3C && EXPERIMENTAL
+ depends on MMC_SDHCI_S3C
help
Enable DMA support on the Samsung S3C SDHCI glue. The DMA
has proved to be problematic if the controller encounters
@@ -330,8 +327,8 @@ config MMC_MXS
If unsure, say N.
config MMC_TIFM_SD
- tristate "TI Flash Media MMC/SD Interface support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && PCI
+ tristate "TI Flash Media MMC/SD Interface support"
+ depends on PCI
select TIFM_CORE
help
Say Y here if you want to be able to access MMC/SD cards with
@@ -410,8 +407,7 @@ config MMC_S3C_PIO
the S3C MCI driver.
config MMC_S3C_DMA
- bool "Use DMA transfers only (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ bool "Use DMA transfers only"
help
Use DMA to transfer data between memory and the hardare.
@@ -420,7 +416,7 @@ config MMC_S3C_DMA
option is useful.
config MMC_S3C_PIODMA
- bool "Support for both PIO and DMA (EXPERIMENTAL)"
+ bool "Support for both PIO and DMA"
help
Compile both the PIO and DMA transfer routines into the
driver and let the platform select at run-time which one
@@ -431,8 +427,8 @@ config MMC_S3C_PIODMA
endchoice
config MMC_SDRICOH_CS
- tristate "MMC/SD driver for Ricoh Bay1Controllers (EXPERIMENTAL)"
- depends on EXPERIMENTAL && PCI && PCMCIA
+ tristate "MMC/SD driver for Ricoh Bay1Controllers"
+ depends on PCI && PCMCIA
help
Say Y here if your Notebook reports a Ricoh Bay1Controller PCMCIA
card whenever you insert a MMC or SD card into the card slot.
diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
index 5e1fb1d..41c27b7 100644
--- a/drivers/mmc/host/dw_mmc-pltfm.c
+++ b/drivers/mmc/host/dw_mmc-pltfm.c
@@ -10,6 +10,7 @@
* (at your option) any later version.
*/
+#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/io.h>
@@ -46,9 +47,9 @@ int dw_mci_pltfm_register(struct platform_device *pdev,
host->dev = &pdev->dev;
host->irq_flags = 0;
host->pdata = pdev->dev.platform_data;
- host->regs = devm_request_and_ioremap(&pdev->dev, regs);
- if (!host->regs)
- return -ENOMEM;
+ host->regs = devm_ioremap_resource(&pdev->dev, regs);
+ if (IS_ERR(host->regs))
+ return PTR_ERR(host->regs);
if (drv_data && drv_data->init) {
ret = drv_data->init(host);
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 1507723..372e921 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -20,6 +20,7 @@
#include <linux/err.h>
#include <linux/highmem.h>
#include <linux/log2.h>
+#include <linux/mmc/pm.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <linux/amba/bus.h>
@@ -59,6 +60,7 @@ static unsigned int fmax = 515633;
* @blksz_datactrl16: true if Block size is at b16..b30 position in datactrl register
* @pwrreg_powerup: power up value for MMCIPOWER register
* @signal_direction: input/out direction of bus signals can be indicated
+ * @pwrreg_clkgate: MMCIPOWER register must be used to gate the clock
*/
struct variant_data {
unsigned int clkreg;
@@ -71,6 +73,7 @@ struct variant_data {
bool blksz_datactrl16;
u32 pwrreg_powerup;
bool signal_direction;
+ bool pwrreg_clkgate;
};
static struct variant_data variant_arm = {
@@ -87,6 +90,14 @@ static struct variant_data variant_arm_extended_fifo = {
.pwrreg_powerup = MCI_PWR_UP,
};
+static struct variant_data variant_arm_extended_fifo_hwfc = {
+ .fifosize = 128 * 4,
+ .fifohalfsize = 64 * 4,
+ .clkreg_enable = MCI_ARM_HWFCEN,
+ .datalength_bits = 16,
+ .pwrreg_powerup = MCI_PWR_UP,
+};
+
static struct variant_data variant_u300 = {
.fifosize = 16 * 4,
.fifohalfsize = 8 * 4,
@@ -95,6 +106,7 @@ static struct variant_data variant_u300 = {
.sdio = true,
.pwrreg_powerup = MCI_PWR_ON,
.signal_direction = true,
+ .pwrreg_clkgate = true,
};
static struct variant_data variant_nomadik = {
@@ -106,6 +118,7 @@ static struct variant_data variant_nomadik = {
.st_clkdiv = true,
.pwrreg_powerup = MCI_PWR_ON,
.signal_direction = true,
+ .pwrreg_clkgate = true,
};
static struct variant_data variant_ux500 = {
@@ -118,6 +131,7 @@ static struct variant_data variant_ux500 = {
.st_clkdiv = true,
.pwrreg_powerup = MCI_PWR_ON,
.signal_direction = true,
+ .pwrreg_clkgate = true,
};
static struct variant_data variant_ux500v2 = {
@@ -131,9 +145,28 @@ static struct variant_data variant_ux500v2 = {
.blksz_datactrl16 = true,
.pwrreg_powerup = MCI_PWR_ON,
.signal_direction = true,
+ .pwrreg_clkgate = true,
};
/*
+ * Validate mmc prerequisites
+ */
+static int mmci_validate_data(struct mmci_host *host,
+ struct mmc_data *data)
+{
+ if (!data)
+ return 0;
+
+ if (!is_power_of_2(data->blksz)) {
+ dev_err(mmc_dev(host->mmc),
+ "unsupported block size (%d bytes)\n", data->blksz);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
* This must be called with host->lock held
*/
static void mmci_write_clkreg(struct mmci_host *host, u32 clk)
@@ -202,6 +235,9 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_8)
clk |= MCI_ST_8BIT_BUS;
+ if (host->mmc->ios.timing == MMC_TIMING_UHS_DDR50)
+ clk |= MCI_ST_UX500_NEG_EDGE;
+
mmci_write_clkreg(host, clk);
}
@@ -352,10 +388,33 @@ static inline void mmci_dma_release(struct mmci_host *host)
host->dma_rx_channel = host->dma_tx_channel = NULL;
}
+static void mmci_dma_data_error(struct mmci_host *host)
+{
+ dev_err(mmc_dev(host->mmc), "error during DMA transfer!\n");
+ dmaengine_terminate_all(host->dma_current);
+ host->dma_current = NULL;
+ host->dma_desc_current = NULL;
+ host->data->host_cookie = 0;
+}
+
static void mmci_dma_unmap(struct mmci_host *host, struct mmc_data *data)
{
- struct dma_chan *chan = host->dma_current;
+ struct dma_chan *chan;
enum dma_data_direction dir;
+
+ if (data->flags & MMC_DATA_READ) {
+ dir = DMA_FROM_DEVICE;
+ chan = host->dma_rx_channel;
+ } else {
+ dir = DMA_TO_DEVICE;
+ chan = host->dma_tx_channel;
+ }
+
+ dma_unmap_sg(chan->device->dev, data->sg, data->sg_len, dir);
+}
+
+static void mmci_dma_finalize(struct mmci_host *host, struct mmc_data *data)
+{
u32 status;
int i;
@@ -374,19 +433,13 @@ static void mmci_dma_unmap(struct mmci_host *host, struct mmc_data *data)
* contiguous buffers. On TX, we'll get a FIFO underrun error.
*/
if (status & MCI_RXDATAAVLBLMASK) {
- dmaengine_terminate_all(chan);
+ mmci_dma_data_error(host);
if (!data->error)
data->error = -EIO;
}
- if (data->flags & MMC_DATA_WRITE) {
- dir = DMA_TO_DEVICE;
- } else {
- dir = DMA_FROM_DEVICE;
- }
-
if (!data->host_cookie)
- dma_unmap_sg(chan->device->dev, data->sg, data->sg_len, dir);
+ mmci_dma_unmap(host, data);
/*
* Use of DMA with scatter-gather is impossible.
@@ -396,16 +449,15 @@ static void mmci_dma_unmap(struct mmci_host *host, struct mmc_data *data)
dev_err(mmc_dev(host->mmc), "buggy DMA detected. Taking evasive action.\n");
mmci_dma_release(host);
}
-}
-static void mmci_dma_data_error(struct mmci_host *host)
-{
- dev_err(mmc_dev(host->mmc), "error during DMA transfer!\n");
- dmaengine_terminate_all(host->dma_current);
+ host->dma_current = NULL;
+ host->dma_desc_current = NULL;
}
-static int mmci_dma_prep_data(struct mmci_host *host, struct mmc_data *data,
- struct mmci_host_next *next)
+/* prepares DMA channel and DMA descriptor, returns non-zero on failure */
+static int __mmci_dma_prep_data(struct mmci_host *host, struct mmc_data *data,
+ struct dma_chan **dma_chan,
+ struct dma_async_tx_descriptor **dma_desc)
{
struct variant_data *variant = host->variant;
struct dma_slave_config conf = {
@@ -423,16 +475,6 @@ static int mmci_dma_prep_data(struct mmci_host *host, struct mmc_data *data,
enum dma_data_direction buffer_dirn;
int nr_sg;
- /* Check if next job is already prepared */
- if (data->host_cookie && !next &&
- host->dma_current && host->dma_desc_current)
- return 0;
-
- if (!next) {
- host->dma_current = NULL;
- host->dma_desc_current = NULL;
- }
-
if (data->flags & MMC_DATA_READ) {
conf.direction = DMA_DEV_TO_MEM;
buffer_dirn = DMA_FROM_DEVICE;
@@ -462,29 +504,41 @@ static int mmci_dma_prep_data(struct mmci_host *host, struct mmc_data *data,
if (!desc)
goto unmap_exit;
- if (next) {
- next->dma_chan = chan;
- next->dma_desc = desc;
- } else {
- host->dma_current = chan;
- host->dma_desc_current = desc;
- }
+ *dma_chan = chan;
+ *dma_desc = desc;
return 0;
unmap_exit:
- if (!next)
- dmaengine_terminate_all(chan);
dma_unmap_sg(device->dev, data->sg, data->sg_len, buffer_dirn);
return -ENOMEM;
}
+static inline int mmci_dma_prep_data(struct mmci_host *host,
+ struct mmc_data *data)
+{
+ /* Check if next job is already prepared. */
+ if (host->dma_current && host->dma_desc_current)
+ return 0;
+
+ /* No job were prepared thus do it now. */
+ return __mmci_dma_prep_data(host, data, &host->dma_current,
+ &host->dma_desc_current);
+}
+
+static inline int mmci_dma_prep_next(struct mmci_host *host,
+ struct mmc_data *data)
+{
+ struct mmci_host_next *nd = &host->next_data;
+ return __mmci_dma_prep_data(host, data, &nd->dma_chan, &nd->dma_desc);
+}
+
static int mmci_dma_start_data(struct mmci_host *host, unsigned int datactrl)
{
int ret;
struct mmc_data *data = host->data;
- ret = mmci_dma_prep_data(host, host->data, NULL);
+ ret = mmci_dma_prep_data(host, host->data);
if (ret)
return ret;
@@ -514,19 +568,11 @@ static void mmci_get_next_data(struct mmci_host *host, struct mmc_data *data)
{
struct mmci_host_next *next = &host->next_data;
- if (data->host_cookie && data->host_cookie != next->cookie) {
- pr_warning("[%s] invalid cookie: data->host_cookie %d"
- " host->next_data.cookie %d\n",
- __func__, data->host_cookie, host->next_data.cookie);
- data->host_cookie = 0;
- }
-
- if (!data->host_cookie)
- return;
+ WARN_ON(data->host_cookie && data->host_cookie != next->cookie);
+ WARN_ON(!data->host_cookie && (next->dma_desc || next->dma_chan));
host->dma_desc_current = next->dma_desc;
host->dma_current = next->dma_chan;
-
next->dma_desc = NULL;
next->dma_chan = NULL;
}
@@ -541,19 +587,13 @@ static void mmci_pre_request(struct mmc_host *mmc, struct mmc_request *mrq,
if (!data)
return;
- if (data->host_cookie) {
- data->host_cookie = 0;
+ BUG_ON(data->host_cookie);
+
+ if (mmci_validate_data(host, data))
return;
- }
- /* if config for dma */
- if (((data->flags & MMC_DATA_WRITE) && host->dma_tx_channel) ||
- ((data->flags & MMC_DATA_READ) && host->dma_rx_channel)) {
- if (mmci_dma_prep_data(host, data, nd))
- data->host_cookie = 0;
- else
- data->host_cookie = ++nd->cookie < 0 ? 1 : nd->cookie;
- }
+ if (!mmci_dma_prep_next(host, data))
+ data->host_cookie = ++nd->cookie < 0 ? 1 : nd->cookie;
}
static void mmci_post_request(struct mmc_host *mmc, struct mmc_request *mrq,
@@ -561,29 +601,23 @@ static void mmci_post_request(struct mmc_host *mmc, struct mmc_request *mrq,
{
struct mmci_host *host = mmc_priv(mmc);
struct mmc_data *data = mrq->data;
- struct dma_chan *chan;
- enum dma_data_direction dir;
- if (!data)
+ if (!data || !data->host_cookie)
return;
- if (data->flags & MMC_DATA_READ) {
- dir = DMA_FROM_DEVICE;
- chan = host->dma_rx_channel;
- } else {
- dir = DMA_TO_DEVICE;
- chan = host->dma_tx_channel;
- }
+ mmci_dma_unmap(host, data);
+ if (err) {
+ struct mmci_host_next *next = &host->next_data;
+ struct dma_chan *chan;
+ if (data->flags & MMC_DATA_READ)
+ chan = host->dma_rx_channel;
+ else
+ chan = host->dma_tx_channel;
+ dmaengine_terminate_all(chan);
- /* if config for dma */
- if (chan) {
- if (err)
- dmaengine_terminate_all(chan);
- if (data->host_cookie)
- dma_unmap_sg(mmc_dev(host->mmc), data->sg,
- data->sg_len, dir);
- mrq->data->host_cookie = 0;
+ next->dma_desc = NULL;
+ next->dma_chan = NULL;
}
}
@@ -604,6 +638,11 @@ static inline void mmci_dma_unmap(struct mmci_host *host, struct mmc_data *data)
{
}
+static inline void mmci_dma_finalize(struct mmci_host *host,
+ struct mmc_data *data)
+{
+}
+
static inline void mmci_dma_data_error(struct mmci_host *host)
{
}
@@ -680,6 +719,9 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
mmci_write_clkreg(host, clk);
}
+ if (host->mmc->ios.timing == MMC_TIMING_UHS_DDR50)
+ datactrl |= MCI_ST_DPSM_DDRMODE;
+
/*
* Attempt to use DMA operation mode, if this
* should fail, fall back to PIO mode
@@ -751,8 +793,10 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
u32 remain, success;
/* Terminate the DMA transfer */
- if (dma_inprogress(host))
+ if (dma_inprogress(host)) {
mmci_dma_data_error(host);
+ mmci_dma_unmap(host, data);
+ }
/*
* Calculate how far we are into the transfer. Note that
@@ -791,7 +835,7 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
if (status & MCI_DATAEND || data->error) {
if (dma_inprogress(host))
- mmci_dma_unmap(host, data);
+ mmci_dma_finalize(host, data);
mmci_stop_data(host);
if (!data->error)
@@ -828,8 +872,10 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
if (!cmd->data || cmd->error) {
if (host->data) {
/* Terminate the DMA transfer */
- if (dma_inprogress(host))
+ if (dma_inprogress(host)) {
mmci_dma_data_error(host);
+ mmci_dma_unmap(host, host->data);
+ }
mmci_stop_data(host);
}
mmci_request_end(host, cmd->mrq);
@@ -1055,10 +1101,8 @@ static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
WARN_ON(host->mrq != NULL);
- if (mrq->data && !is_power_of_2(mrq->data->blksz)) {
- dev_err(mmc_dev(mmc), "unsupported block size (%d bytes)\n",
- mrq->data->blksz);
- mrq->cmd->error = -EINVAL;
+ mrq->cmd->error = mmci_validate_data(host, mrq->data);
+ if (mrq->cmd->error) {
mmc_request_done(mmc, mrq);
return;
}
@@ -1086,7 +1130,6 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
struct variant_data *variant = host->variant;
u32 pwr = 0;
unsigned long flags;
- int ret;
pm_runtime_get_sync(mmc_dev(mmc));
@@ -1096,23 +1139,13 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
switch (ios->power_mode) {
case MMC_POWER_OFF:
- if (host->vcc)
- ret = mmc_regulator_set_ocr(mmc, host->vcc, 0);
+ if (!IS_ERR(mmc->supply.vmmc))
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
break;
case MMC_POWER_UP:
- if (host->vcc) {
- ret = mmc_regulator_set_ocr(mmc, host->vcc, ios->vdd);
- if (ret) {
- dev_err(mmc_dev(mmc), "unable to set OCR\n");
- /*
- * The .set_ios() function in the mmc_host_ops
- * struct return void, and failing to set the
- * power should be rare so we print an error
- * and return here.
- */
- goto out;
- }
- }
+ if (!IS_ERR(mmc->supply.vmmc))
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
+
/*
* The ST Micro variant doesn't have the PL180s MCI_PWR_UP
* and instead uses MCI_PWR_ON so apply whatever value is
@@ -1154,6 +1187,13 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
}
}
+ /*
+ * If clock = 0 and the variant requires the MMCIPOWER to be used for
+ * gating the clock, the MCI_PWR_ON bit is cleared.
+ */
+ if (!ios->clock && variant->pwrreg_clkgate)
+ pwr &= ~MCI_PWR_ON;
+
spin_lock_irqsave(&host->lock, flags);
mmci_set_clkreg(host, ios->clock);
@@ -1161,7 +1201,6 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
spin_unlock_irqrestore(&host->lock, flags);
- out:
pm_runtime_mark_last_busy(mmc_dev(mmc));
pm_runtime_put_autosuspend(mmc_dev(mmc));
}
@@ -1384,32 +1423,19 @@ static int mmci_probe(struct amba_device *dev,
} else
dev_warn(&dev->dev, "could not get default pinstate\n");
-#ifdef CONFIG_REGULATOR
- /* If we're using the regulator framework, try to fetch a regulator */
- host->vcc = regulator_get(&dev->dev, "vmmc");
- if (IS_ERR(host->vcc))
- host->vcc = NULL;
- else {
- int mask = mmc_regulator_get_ocrmask(host->vcc);
-
- if (mask < 0)
- dev_err(&dev->dev, "error getting OCR mask (%d)\n",
- mask);
- else {
- host->mmc->ocr_avail = (u32) mask;
- if (plat->ocr_mask)
- dev_warn(&dev->dev,
- "Provided ocr_mask/setpower will not be used "
- "(using regulator instead)\n");
- }
- }
-#endif
- /* Fall back to platform data if no regulator is found */
- if (host->vcc == NULL)
+ /* Get regulators and the supported OCR mask */
+ mmc_regulator_get_supply(mmc);
+ if (!mmc->ocr_avail)
mmc->ocr_avail = plat->ocr_mask;
+ else if (plat->ocr_mask)
+ dev_warn(mmc_dev(mmc), "Platform OCR mask is ignored\n");
+
mmc->caps = plat->capabilities;
mmc->caps2 = plat->capabilities2;
+ /* We support these PM capabilities. */
+ mmc->pm_caps = MMC_PM_KEEP_POWER;
+
/*
* We can do SGIO
*/
@@ -1585,10 +1611,6 @@ static int mmci_remove(struct amba_device *dev)
clk_disable_unprepare(host->clk);
clk_put(host->clk);
- if (host->vcc)
- mmc_regulator_set_ocr(mmc, host->vcc, 0);
- regulator_put(host->vcc);
-
mmc_free_host(mmc);
amba_release_regions(dev);
@@ -1636,8 +1658,37 @@ static int mmci_resume(struct device *dev)
}
#endif
+#ifdef CONFIG_PM_RUNTIME
+static int mmci_runtime_suspend(struct device *dev)
+{
+ struct amba_device *adev = to_amba_device(dev);
+ struct mmc_host *mmc = amba_get_drvdata(adev);
+
+ if (mmc) {
+ struct mmci_host *host = mmc_priv(mmc);
+ clk_disable_unprepare(host->clk);
+ }
+
+ return 0;
+}
+
+static int mmci_runtime_resume(struct device *dev)
+{
+ struct amba_device *adev = to_amba_device(dev);
+ struct mmc_host *mmc = amba_get_drvdata(adev);
+
+ if (mmc) {
+ struct mmci_host *host = mmc_priv(mmc);
+ clk_prepare_enable(host->clk);
+ }
+
+ return 0;
+}
+#endif
+
static const struct dev_pm_ops mmci_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(mmci_suspend, mmci_resume)
+ SET_RUNTIME_PM_OPS(mmci_runtime_suspend, mmci_runtime_resume, NULL)
};
static struct amba_id mmci_ids[] = {
@@ -1652,6 +1703,11 @@ static struct amba_id mmci_ids[] = {
.data = &variant_arm_extended_fifo,
},
{
+ .id = 0x02041180,
+ .mask = 0xff0fffff,
+ .data = &variant_arm_extended_fifo_hwfc,
+ },
+ {
.id = 0x00041181,
.mask = 0x000fffff,
.data = &variant_arm,
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index d34d8c0..1f33ad5 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -28,6 +28,8 @@
#define MCI_ST_UX500_NEG_EDGE (1 << 13)
#define MCI_ST_UX500_HWFCEN (1 << 14)
#define MCI_ST_UX500_CLK_INV (1 << 15)
+/* Modified PL180 on Versatile Express platform */
+#define MCI_ARM_HWFCEN (1 << 12)
#define MMCIARGUMENT 0x008
#define MMCICOMMAND 0x00c
@@ -193,7 +195,6 @@ struct mmci_host {
/* pio stuff */
struct sg_mapping_iter sg_miter;
unsigned int size;
- struct regulator *vcc;
/* pinctrl handles */
struct pinctrl *pinctrl;
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index 206fe49..5b66555 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -614,9 +614,9 @@ static int mxs_mmc_probe(struct platform_device *pdev)
host = mmc_priv(mmc);
ssp = &host->ssp;
ssp->dev = &pdev->dev;
- ssp->base = devm_request_and_ioremap(&pdev->dev, iores);
- if (!ssp->base) {
- ret = -EADDRNOTAVAIL;
+ ssp->base = devm_ioremap_resource(&pdev->dev, iores);
+ if (IS_ERR(ssp->base)) {
+ ret = PTR_ERR(ssp->base);
goto out_mmc_free;
}
diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
index 571915d..f74b5ad 100644
--- a/drivers/mmc/host/rtsx_pci_sdmmc.c
+++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
@@ -1060,26 +1060,6 @@ static int sd_wait_voltage_stable_2(struct realtek_pci_sdmmc *host)
return 0;
}
-static int sd_change_bank_voltage(struct realtek_pci_sdmmc *host, u8 voltage)
-{
- struct rtsx_pcr *pcr = host->pcr;
- int err;
-
- if (voltage == SD_IO_3V3) {
- err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24);
- if (err < 0)
- return err;
- } else if (voltage == SD_IO_1V8) {
- err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C40 | 0x24);
- if (err < 0)
- return err;
- } else {
- return -EINVAL;
- }
-
- return 0;
-}
-
static int sdmmc_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct realtek_pci_sdmmc *host = mmc_priv(mmc);
@@ -1098,11 +1078,11 @@ static int sdmmc_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
rtsx_pci_start_run(pcr);
if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330)
- voltage = SD_IO_3V3;
+ voltage = OUTPUT_3V3;
else
- voltage = SD_IO_1V8;
+ voltage = OUTPUT_1V8;
- if (voltage == SD_IO_1V8) {
+ if (voltage == OUTPUT_1V8) {
err = rtsx_pci_write_register(pcr,
SD30_DRIVE_SEL, 0x07, DRIVER_TYPE_B);
if (err < 0)
@@ -1113,11 +1093,11 @@ static int sdmmc_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
goto out;
}
- err = sd_change_bank_voltage(host, voltage);
+ err = rtsx_pci_switch_output_voltage(pcr, voltage);
if (err < 0)
goto out;
- if (voltage == SD_IO_1V8) {
+ if (voltage == OUTPUT_1V8) {
err = sd_wait_voltage_stable_2(host);
if (err < 0)
goto out;
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 82a8de1..a0c6214 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -651,10 +651,9 @@ static int sdhci_s3c_probe(struct platform_device *pdev)
#endif
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- host->ioaddr = devm_request_and_ioremap(&pdev->dev, res);
- if (!host->ioaddr) {
- dev_err(dev, "failed to map registers\n");
- ret = -ENXIO;
+ host->ioaddr = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(host->ioaddr)) {
+ ret = PTR_ERR(host->ioaddr);
goto err_req_regs;
}
generated by cgit v1.1 at 2024-12-27 18:31:13 +0000