15 files changed, 206 insertions, 57 deletions

diff --git a/include/uapi/linux/cn_proc.h b/include/uapi/linux/cn_proc.h
index 0d7b499..f6c2710 100644
--- a/include/uapi/linux/cn_proc.h
+++ b/include/uapi/linux/cn_proc.h
@@ -56,7 +56,9 @@ struct proc_event {
 		PROC_EVENT_PTRACE = 0x00000100,
 		PROC_EVENT_COMM = 0x00000200,
 		/* "next" should be 0x00000400 */
-		/* "last" is the last process event: exit */
+		/* "last" is the last process event: exit,
+		 * while "next to last" is coredumping event */
+		PROC_EVENT_COREDUMP = 0x40000000,
 		PROC_EVENT_EXIT = 0x80000000
 	} what;
 	__u32 cpu;
@@ -110,11 +112,17 @@ struct proc_event {
 			char           comm[16];
 		} comm;
 
+		struct coredump_proc_event {
+			__kernel_pid_t process_pid;
+			__kernel_pid_t process_tgid;
+		} coredump;
+
 		struct exit_proc_event {
 			__kernel_pid_t process_pid;
 			__kernel_pid_t process_tgid;
 			__u32 exit_code, exit_signal;
 		} exit;
+
 	} event_data;
 };
 
diff --git a/include/uapi/linux/filter.h b/include/uapi/linux/filter.h
index 9cfde69..8eb9cca 100644
--- a/include/uapi/linux/filter.h
+++ b/include/uapi/linux/filter.h
@@ -129,7 +129,8 @@ struct sock_fprog {	/* Required for SO_ATTACH_FILTER. */
 #define SKF_AD_ALU_XOR_X	40
 #define SKF_AD_VLAN_TAG	44
 #define SKF_AD_VLAN_TAG_PRESENT 48
-#define SKF_AD_MAX	52
+#define SKF_AD_PAY_OFFSET	52
+#define SKF_AD_MAX	56
 #define SKF_NET_OFF   (-0x100000)
 #define SKF_LL_OFF    (-0x200000)
 
diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h
index 798032d..ade07f1 100644
--- a/include/uapi/linux/if_ether.h
+++ b/include/uapi/linux/if_ether.h
@@ -94,6 +94,9 @@
 #define ETH_P_EDSA	0xDADA		/* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
 #define ETH_P_AF_IUCV   0xFBFB		/* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */
 
+#define ETH_P_802_3_MIN	0x0600		/* If the value in the ethernet type is less than this value
+					 * then the frame is Ethernet II. Else it is 802.3 */
+
 /*
  *	Non DIX types. Won't clash for 1500 types.
  */
diff --git a/include/uapi/linux/if_packet.h b/include/uapi/linux/if_packet.h
index f9a6037..8136658 100644
--- a/include/uapi/linux/if_packet.h
+++ b/include/uapi/linux/if_packet.h
@@ -55,6 +55,8 @@ struct sockaddr_ll {
 #define PACKET_FANOUT_HASH		0
 #define PACKET_FANOUT_LB		1
 #define PACKET_FANOUT_CPU		2
+#define PACKET_FANOUT_ROLLOVER		3
+#define PACKET_FANOUT_FLAG_ROLLOVER	0x1000
 #define PACKET_FANOUT_FLAG_DEFRAG	0x8000
 
 struct tpacket_stats {
diff --git a/include/uapi/linux/neighbour.h b/include/uapi/linux/neighbour.h
index adb068c..f175212 100644
--- a/include/uapi/linux/neighbour.h
+++ b/include/uapi/linux/neighbour.h
@@ -21,6 +21,9 @@ enum {
 	NDA_CACHEINFO,
 	NDA_PROBES,
 	NDA_VLAN,
+	NDA_PORT,
+	NDA_VNI,
+	NDA_IFINDEX,
 	__NDA_MAX
 };
 
diff --git a/include/uapi/linux/netfilter/xt_NFQUEUE.h b/include/uapi/linux/netfilter/xt_NFQUEUE.h
index 9eafdbb..8bb5fe6 100644
--- a/include/uapi/linux/netfilter/xt_NFQUEUE.h
+++ b/include/uapi/linux/netfilter/xt_NFQUEUE.h
@@ -26,4 +26,13 @@ struct xt_NFQ_info_v2 {
 	__u16 bypass;
 };
 
+struct xt_NFQ_info_v3 {
+	__u16 queuenum;
+	__u16 queues_total;
+	__u16 flags;
+#define NFQ_FLAG_BYPASS		0x01 /* for compatibility with v2 */
+#define NFQ_FLAG_CPU_FANOUT	0x02 /* use current CPU (no hashing) */
+#define NFQ_FLAG_MASK		0x03
+};
+
 #endif /* _XT_NFQ_TARGET_H */
diff --git a/include/uapi/linux/netfilter_ipv6/ip6t_frag.h b/include/uapi/linux/netfilter_ipv6/ip6t_frag.h
index b47f61b..dfd8bc2 100644
--- a/include/uapi/linux/netfilter_ipv6/ip6t_frag.h
+++ b/include/uapi/linux/netfilter_ipv6/ip6t_frag.h
@@ -4,9 +4,9 @@
 #include <linux/types.h>
 
 struct ip6t_frag {
-	__u32 ids[2];			/* Security Parameter Index */
+	__u32 ids[2];			/* Identification range */
 	__u32 hdrlen;			/* Header Length */
-	__u8  flags;			/*  */
+	__u8  flags;			/* Flags */
 	__u8  invflags;			/* Inverse flags */
 };
 
diff --git a/include/uapi/linux/netlink.h b/include/uapi/linux/netlink.h
index 78d5b8a..32a354f 100644
--- a/include/uapi/linux/netlink.h
+++ b/include/uapi/linux/netlink.h
@@ -78,7 +78,7 @@ struct nlmsghdr {
 #define NLMSG_ALIGNTO	4U
 #define NLMSG_ALIGN(len) ( ((len)+NLMSG_ALIGNTO-1) & ~(NLMSG_ALIGNTO-1) )
 #define NLMSG_HDRLEN	 ((int) NLMSG_ALIGN(sizeof(struct nlmsghdr)))
-#define NLMSG_LENGTH(len) ((len)+NLMSG_ALIGN(NLMSG_HDRLEN))
+#define NLMSG_LENGTH(len) ((len) + NLMSG_HDRLEN)
 #define NLMSG_SPACE(len) NLMSG_ALIGN(NLMSG_LENGTH(len))
 #define NLMSG_DATA(nlh)  ((void*)(((char*)nlh) + NLMSG_LENGTH(0)))
 #define NLMSG_NEXT(nlh,len)	 ((len) -= NLMSG_ALIGN((nlh)->nlmsg_len), \
diff --git a/include/uapi/linux/netlink_diag.h b/include/uapi/linux/netlink_diag.h
new file mode 100644
index 0000000..88009a3
--- /dev/null
+++ b/include/uapi/linux/netlink_diag.h
@@ -0,0 +1,42 @@
+#ifndef __NETLINK_DIAG_H__
+#define __NETLINK_DIAG_H__
+
+#include <linux/types.h>
+
+struct netlink_diag_req {
+	__u8	sdiag_family;
+	__u8	sdiag_protocol;
+	__u16	pad;
+	__u32	ndiag_ino;
+	__u32	ndiag_show;
+	__u32	ndiag_cookie[2];
+};
+
+struct netlink_diag_msg {
+	__u8	ndiag_family;
+	__u8	ndiag_type;
+	__u8	ndiag_protocol;
+	__u8	ndiag_state;
+
+	__u32	ndiag_portid;
+	__u32	ndiag_dst_portid;
+	__u32	ndiag_dst_group;
+	__u32	ndiag_ino;
+	__u32	ndiag_cookie[2];
+};
+
+enum {
+	NETLINK_DIAG_MEMINFO,
+	NETLINK_DIAG_GROUPS,
+
+	__NETLINK_DIAG_MAX,
+};
+
+#define NETLINK_DIAG_MAX (__NETLINK_DIAG_MAX - 1)
+
+#define NDIAG_PROTO_ALL		((__u8) ~0)
+
+#define NDIAG_SHOW_MEMINFO	0x00000001 /* show memory info of a socket */
+#define NDIAG_SHOW_GROUPS	0x00000002 /* show groups of a netlink socket */
+
+#endif
diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h
index 7969f46..7440bc8 100644
--- a/include/uapi/linux/nfc.h
+++ b/include/uapi/linux/nfc.h
@@ -90,6 +90,8 @@ enum nfc_commands {
 	NFC_CMD_LLC_SET_PARAMS,
 	NFC_CMD_ENABLE_SE,
 	NFC_CMD_DISABLE_SE,
+	NFC_CMD_LLC_SDREQ,
+	NFC_EVENT_LLC_SDRES,
 /* private: internal use only */
 	__NFC_CMD_AFTER_LAST
 };
@@ -140,11 +142,21 @@ enum nfc_attrs {
 	NFC_ATTR_LLC_PARAM_RW,
 	NFC_ATTR_LLC_PARAM_MIUX,
 	NFC_ATTR_SE,
+	NFC_ATTR_LLC_SDP,
 /* private: internal use only */
 	__NFC_ATTR_AFTER_LAST
 };
 #define NFC_ATTR_MAX (__NFC_ATTR_AFTER_LAST - 1)
 
+enum nfc_sdp_attr {
+	NFC_SDP_ATTR_UNSPEC,
+	NFC_SDP_ATTR_URI,
+	NFC_SDP_ATTR_SAP,
+/* private: internal use only */
+	__NFC_SDP_ATTR_AFTER_LAST
+};
+#define NFC_SDP_ATTR_MAX (__NFC_SDP_ATTR_AFTER_LAST - 1)
+
 #define NFC_DEVICE_NAME_MAXSIZE 8
 #define NFC_NFCID1_MAXSIZE 10
 #define NFC_SENSB_RES_MAXSIZE 12
@@ -220,4 +232,8 @@ struct sockaddr_nfc_llcp {
 #define NFC_LLCP_DIRECTION_RX		0x00
 #define NFC_LLCP_DIRECTION_TX		0x01
 
+/* socket option names */
+#define NFC_LLCP_RW   0
+#define NFC_LLCP_MIUX 1
+
 #endif /*__LINUX_NFC_H */
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index c46bb01..79da871 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -36,7 +36,21 @@
  * The station is still assumed to belong to the AP interface it was added
  * to.
  *
- * TODO: need more info?
+ * Station handling varies per interface type and depending on the driver's
+ * capabilities.
+ *
+ * For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS
+ * and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows:
+ *  - a setup station entry is added, not yet authorized, without any rate
+ *    or capability information, this just exists to avoid race conditions
+ *  - when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid
+ *    to add rate and capability information to the station and at the same
+ *    time mark it authorized.
+ *  - %NL80211_TDLS_ENABLE_LINK is then used
+ *  - after this, the only valid operation is to remove it by tearing down
+ *    the TDLS link (%NL80211_TDLS_DISABLE_LINK)
+ *
+ * TODO: need more info for other interface types
  */
 
 /**
@@ -499,9 +513,11 @@
  * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a
  *      beacon or probe response from a compatible mesh peer.  This is only
  *      sent while no station information (sta_info) exists for the new peer
- *      candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH is set.  On
- *      reception of this notification, userspace may decide to create a new
- *      station (@NL80211_CMD_NEW_STATION).  To stop this notification from
+ *      candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH,
+ *      @NL80211_MESH_SETUP_USERSPACE_AMPE, or
+ *      @NL80211_MESH_SETUP_USERSPACE_MPM is set.  On reception of this
+ *      notification, userspace may decide to create a new station
+ *      (@NL80211_CMD_NEW_STATION).  To stop this notification from
  *      reoccurring, the userspace authentication daemon may want to create the
  *      new station with the AUTHENTICATED flag unset and maybe change it later
  *      depending on the authentication result.
@@ -611,6 +627,18 @@
  *	%NL80211_ATTR_RADAR_EVENT is used to inform about the type of the
  *	event.
  *
+ * @NL80211_CMD_GET_PROTOCOL_FEATURES: Get global nl80211 protocol features,
+ *	i.e. features for the nl80211 protocol rather than device features.
+ *	Returns the features in the %NL80211_ATTR_PROTOCOL_FEATURES bitmap.
+ *
+ * @NL80211_CMD_UPDATE_FT_IES: Pass down the most up-to-date Fast Transition
+ *	Information Element to the WLAN driver
+ *
+ * @NL80211_CMD_FT_EVENT: Send a Fast transition event from the WLAN driver
+ *	to the supplicant. This will carry the target AP's MAC address along
+ *	with the relevant Information Elements. This event is used to report
+ *	received FT IEs (MDIE, FTIE, RSN IE, TIE, RICIE).
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -765,6 +793,11 @@ enum nl80211_commands {
 
 	NL80211_CMD_RADAR_DETECT,
 
+	NL80211_CMD_GET_PROTOCOL_FEATURES,
+
+	NL80211_CMD_UPDATE_FT_IES,
+	NL80211_CMD_FT_EVENT,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -884,7 +917,8 @@ enum nl80211_commands {
  *	consisting of a nested array.
  *
  * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
- * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link.
+ * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link
+ *	(see &enum nl80211_plink_action).
  * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
  * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
  * 	info given for %NL80211_CMD_GET_MPATH, nested attribute described at
@@ -1167,10 +1201,10 @@ enum nl80211_commands {
  * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver
  *	allows auth frames in a mesh to be passed to userspace for processing via
  *	the @NL80211_MESH_SETUP_USERSPACE_AUTH flag.
- * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as
- *	defined in &enum nl80211_plink_state. Used when userspace is
- *	driving the peer link management state machine.
- *	@NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled.
+ * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as defined in
+ *	&enum nl80211_plink_state. Used when userspace is driving the peer link
+ *	management state machine.  @NL80211_MESH_SETUP_USERSPACE_AMPE or
+ *	@NL80211_MESH_SETUP_USERSPACE_MPM must be enabled.
  *
  * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy
  *	capabilities, the supported WoWLAN triggers
@@ -1368,6 +1402,18 @@ enum nl80211_commands {
  *	advertised to the driver, e.g., to enable TDLS off channel operations
  *	and PU-APSD.
  *
+ * @NL80211_ATTR_PROTOCOL_FEATURES: global nl80211 feature flags, see
+ *	&enum nl80211_protocol_features, the attribute is a u32.
+ *
+ * @NL80211_ATTR_SPLIT_WIPHY_DUMP: flag attribute, userspace supports
+ *	receiving the data for a single wiphy split across multiple
+ *	messages, given with wiphy dump message
+ *
+ * @NL80211_ATTR_MDID: Mobility Domain Identifier
+ *
+ * @NL80211_ATTR_IE_RIC: Resource Information Container Information
+ *	Element
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -1654,6 +1700,15 @@ enum nl80211_attrs {
 	NL80211_ATTR_STA_CAPABILITY,
 	NL80211_ATTR_STA_EXT_CAPABILITY,
 
+	NL80211_ATTR_PROTOCOL_FEATURES,
+	NL80211_ATTR_SPLIT_WIPHY_DUMP,
+
+	NL80211_ATTR_DISABLE_VHT,
+	NL80211_ATTR_VHT_CAPABILITY_MASK,
+
+	NL80211_ATTR_MDID,
+	NL80211_ATTR_IE_RIC,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -2412,8 +2467,10 @@ enum nl80211_mesh_power_mode {
  * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh
  *	point.
  *
- * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically
- *	open peer links when we detect compatible mesh peers.
+ * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically open
+ *	peer links when we detect compatible mesh peers. Disabled if
+ *	@NL80211_MESH_SETUP_USERSPACE_MPM or @NL80211_MESH_SETUP_USERSPACE_AMPE are
+ *	set.
  *
  * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames
  *	containing a PREQ that an MP can send to a particular destination (path
@@ -2559,6 +2616,9 @@ enum nl80211_meshconf_params {
  *	vendor specific synchronization method or disable it to use the default
  *	neighbor offset synchronization
  *
+ * @NL80211_MESH_SETUP_USERSPACE_MPM: Enable this option if userspace will
+ *	implement an MPM which handles peer allocation and state.
+ *
  * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
  *
  * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
@@ -2571,6 +2631,7 @@ enum nl80211_mesh_setup_params {
 	NL80211_MESH_SETUP_USERSPACE_AUTH,
 	NL80211_MESH_SETUP_USERSPACE_AMPE,
 	NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC,
+	NL80211_MESH_SETUP_USERSPACE_MPM,
 
 	/* keep last */
 	__NL80211_MESH_SETUP_ATTR_AFTER_LAST,
@@ -3307,6 +3368,23 @@ enum nl80211_plink_state {
 	MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1
 };
 
+/**
+ * enum nl80211_plink_action - actions to perform in mesh peers
+ *
+ * @NL80211_PLINK_ACTION_NO_ACTION: perform no action
+ * @NL80211_PLINK_ACTION_OPEN: start mesh peer link establishment
+ * @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer
+ * @NUM_NL80211_PLINK_ACTIONS: number of possible actions
+ */
+enum plink_actions {
+	NL80211_PLINK_ACTION_NO_ACTION,
+	NL80211_PLINK_ACTION_OPEN,
+	NL80211_PLINK_ACTION_BLOCK,
+
+	NUM_NL80211_PLINK_ACTIONS,
+};
+
+
 #define NL80211_KCK_LEN			16
 #define NL80211_KEK_LEN			16
 #define NL80211_REPLAY_CTR_LEN		8
@@ -3456,6 +3534,10 @@ enum nl80211_ap_sme_features {
  *	stations the authenticated/associated bits have to be set in the mask.
  * @NL80211_FEATURE_ADVERTISE_CHAN_LIMITS: cfg80211 advertises channel limits
  *	(HT40, VHT 80/160 MHz) if this flag is set
+ * @NL80211_FEATURE_USERSPACE_MPM: This driver supports a userspace Mesh
+ *	Peering Management entity which may be implemented by registering for
+ *	beacons or NL80211_CMD_NEW_PEER_CANDIDATE events. The mesh beacon is
+ *	still generated by the driver.
  */
 enum nl80211_feature_flags {
 	NL80211_FEATURE_SK_TX_STATUS			= 1 << 0,
@@ -3474,6 +3556,7 @@ enum nl80211_feature_flags {
 	/* bit 13 is reserved */
 	NL80211_FEATURE_ADVERTISE_CHAN_LIMITS		= 1 << 14,
 	NL80211_FEATURE_FULL_AP_CLIENT_STATE		= 1 << 15,
+	NL80211_FEATURE_USERSPACE_MPM			= 1 << 16,
 };
 
 /**
@@ -3587,4 +3670,16 @@ enum nl80211_dfs_state {
 	NL80211_DFS_AVAILABLE,
 };
 
+/**
+ * enum enum nl80211_protocol_features - nl80211 protocol features
+ * @NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP: nl80211 supports splitting
+ *	wiphy dumps (if requested by the application with the attribute
+ *	%NL80211_ATTR_SPLIT_WIPHY_DUMP. Also supported is filtering the
+ *	wiphy dump by %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFINDEX or
+ *	%NL80211_ATTR_WDEV.
+ */
+enum nl80211_protocol_features {
+	NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP =	1 << 0,
+};
+
 #endif /* __LINUX_NL80211_H */
diff --git a/include/uapi/linux/pkt_sched.h b/include/uapi/linux/pkt_sched.h
index 32aef0a..dbd71b0 100644
--- a/include/uapi/linux/pkt_sched.h
+++ b/include/uapi/linux/pkt_sched.h
@@ -348,6 +348,7 @@ enum {
 	TCA_HTB_INIT,
 	TCA_HTB_CTAB,
 	TCA_HTB_RTAB,
+	TCA_HTB_DIRECT_QLEN,
 	__TCA_HTB_MAX,
 };
 
diff --git a/include/uapi/linux/snmp.h b/include/uapi/linux/snmp.h
index b49eab8..e00013a 100644
--- a/include/uapi/linux/snmp.h
+++ b/include/uapi/linux/snmp.h
@@ -202,6 +202,8 @@ enum
 	LINUX_MIB_TCPFORWARDRETRANS,		/* TCPForwardRetrans */
 	LINUX_MIB_TCPSLOWSTARTRETRANS,		/* TCPSlowStartRetrans */
 	LINUX_MIB_TCPTIMEOUTS,			/* TCPTimeouts */
+	LINUX_MIB_TCPLOSSPROBES,		/* TCPLossProbes */
+	LINUX_MIB_TCPLOSSPROBERECOVERY,		/* TCPLossProbeRecovery */
 	LINUX_MIB_TCPRENORECOVERYFAIL,		/* TCPRenoRecoveryFail */
 	LINUX_MIB_TCPSACKRECOVERYFAIL,		/* TCPSackRecoveryFail */
 	LINUX_MIB_TCPSCHEDULERFAILED,		/* TCPSchedulerFailed */
diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h
index 6b1ead0..8d776eb 100644
--- a/include/uapi/linux/tcp.h
+++ b/include/uapi/linux/tcp.h
@@ -102,7 +102,6 @@ enum {
 #define TCP_QUICKACK		12	/* Block/reenable quick acks */
 #define TCP_CONGESTION		13	/* Congestion control algorithm */
 #define TCP_MD5SIG		14	/* TCP MD5 Signature (RFC2385) */
-#define TCP_COOKIE_TRANSACTIONS	15	/* TCP Cookie Transactions */
 #define TCP_THIN_LINEAR_TIMEOUTS 16      /* Use linear timeouts for thin streams*/
 #define TCP_THIN_DUPACK         17      /* Fast retrans. after 1 dupack */
 #define TCP_USER_TIMEOUT	18	/* How long for loss retry before timeout */
@@ -199,29 +198,4 @@ struct tcp_md5sig {
 	__u8	tcpm_key[TCP_MD5SIG_MAXKEYLEN];		/* key (binary) */
 };
 
-/* for TCP_COOKIE_TRANSACTIONS (TCPCT) socket option */
-#define TCP_COOKIE_MIN		 8		/*  64-bits */
-#define TCP_COOKIE_MAX		16		/* 128-bits */
-#define TCP_COOKIE_PAIR_SIZE	(2*TCP_COOKIE_MAX)
-
-/* Flags for both getsockopt and setsockopt */
-#define TCP_COOKIE_IN_ALWAYS	(1 << 0)	/* Discard SYN without cookie */
-#define TCP_COOKIE_OUT_NEVER	(1 << 1)	/* Prohibit outgoing cookies,
-						 * supercedes everything. */
-
-/* Flags for getsockopt */
-#define TCP_S_DATA_IN		(1 << 2)	/* Was data received? */
-#define TCP_S_DATA_OUT		(1 << 3)	/* Was data sent? */
-
-/* TCP_COOKIE_TRANSACTIONS data */
-struct tcp_cookie_transactions {
-	__u16	tcpct_flags;			/* see above */
-	__u8	__tcpct_pad1;			/* zero */
-	__u8	tcpct_cookie_desired;		/* bytes */
-	__u16	tcpct_s_data_desired;		/* bytes of variable data */
-	__u16	tcpct_used;			/* bytes in value */
-	__u8	tcpct_value[TCP_MSS_DEFAULT];
-};
-
-
 #endif /* _UAPI_LINUX_TCP_H */
diff --git a/include/uapi/linux/vm_sockets.h b/include/uapi/linux/vm_sockets.h
index df91301..b4ed5d8 100644
--- a/include/uapi/linux/vm_sockets.h
+++ b/include/uapi/linux/vm_sockets.h
@@ -13,12 +13,10 @@
  * more details.
  */
 
-#ifndef _VM_SOCKETS_H_
-#define _VM_SOCKETS_H_
+#ifndef _UAPI_VM_SOCKETS_H
+#define _UAPI_VM_SOCKETS_H
 
-#if !defined(__KERNEL__)
-#include <sys/socket.h>
-#endif
+#include <linux/socket.h>
 
 /* Option name for STREAM socket buffer size.  Use as the option name in
  * setsockopt(3) or getsockopt(3) to set or get an unsigned long long that
@@ -137,14 +135,13 @@
 #define VM_SOCKETS_VERSION_MINOR(_v) (((_v) & 0x0000FFFF))
 
 /* Address structure for vSockets.   The address family should be set to
- * whatever vmci_sock_get_af_value_fd() returns.  The structure members should
- * all align on their natural boundaries without resorting to compiler packing
- * directives.  The total size of this structure should be exactly the same as
- * that of struct sockaddr.
+ * AF_VSOCK.  The structure members should all align on their natural
+ * boundaries without resorting to compiler packing directives.  The total size
+ * of this structure should be exactly the same as that of struct sockaddr.
  */
 
 struct sockaddr_vm {
-	sa_family_t svm_family;
+	__kernel_sa_family_t svm_family;
 	unsigned short svm_reserved1;
 	unsigned int svm_port;
 	unsigned int svm_cid;
@@ -156,8 +153,4 @@ struct sockaddr_vm {
 
 #define IOCTL_VM_SOCKETS_GET_LOCAL_CID		_IO(7, 0xb9)
 
-#if defined(__KERNEL__)
-int vm_sockets_get_local_cid(void);
-#endif
-
-#endif
+#endif /* _UAPI_VM_SOCKETS_H */