diff options
Diffstat (limited to 'sound')
-rw-r--r-- | sound/atmel/ac97c.c | 2 | ||||
-rw-r--r-- | sound/pci/asihpi/hpi6205.c | 22 | ||||
-rw-r--r-- | sound/soc/au1x/psc-i2s.c | 2 | ||||
-rw-r--r-- | sound/soc/codecs/Kconfig | 4 | ||||
-rw-r--r-- | sound/soc/codecs/wm8727.c | 2 | ||||
-rw-r--r-- | sound/soc/codecs/wm8776.c | 1 | ||||
-rw-r--r-- | sound/soc/codecs/wm8988.c | 1 | ||||
-rw-r--r-- | sound/soc/davinci/davinci-mcasp.c | 2 | ||||
-rw-r--r-- | sound/soc/fsl/mpc5200_dma.h | 2 | ||||
-rw-r--r-- | sound/soc/pxa/spitz.c | 36 | ||||
-rw-r--r-- | sound/soc/sh/fsi.c | 27 | ||||
-rw-r--r-- | sound/spi/at73c213.c | 1 | ||||
-rw-r--r-- | sound/usb/clock.c | 12 | ||||
-rw-r--r-- | sound/usb/endpoint.c | 1 | ||||
-rw-r--r-- | sound/usb/format.c | 104 | ||||
-rw-r--r-- | sound/usb/helper.h | 4 | ||||
-rw-r--r-- | sound/usb/mixer.c | 32 |
17 files changed, 153 insertions, 102 deletions
diff --git a/sound/atmel/ac97c.c b/sound/atmel/ac97c.c index 428121a..10c3a87 100644 --- a/sound/atmel/ac97c.c +++ b/sound/atmel/ac97c.c @@ -657,7 +657,7 @@ static irqreturn_t atmel_ac97c_interrupt(int irq, void *dev) if (sr & AC97C_SR_CAEVT) { struct snd_pcm_runtime *runtime; int offset, next_period, block_size; - dev_info(&chip->pdev->dev, "channel A event%s%s%s%s%s%s\n", + dev_dbg(&chip->pdev->dev, "channel A event%s%s%s%s%s%s\n", casr & AC97C_CSR_OVRUN ? " OVRUN" : "", casr & AC97C_CSR_RXRDY ? " RXRDY" : "", casr & AC97C_CSR_UNRUN ? " UNRUN" : "", diff --git a/sound/pci/asihpi/hpi6205.c b/sound/pci/asihpi/hpi6205.c index e89991e..3b44134 100644 --- a/sound/pci/asihpi/hpi6205.c +++ b/sound/pci/asihpi/hpi6205.c @@ -941,11 +941,11 @@ static void outstream_host_buffer_free(struct hpi_adapter_obj *pao, } -static long outstream_get_space_available(struct hpi_hostbuffer_status +static u32 outstream_get_space_available(struct hpi_hostbuffer_status *status) { - return status->size_in_bytes - ((long)(status->host_index) - - (long)(status->dSP_index)); + return status->size_in_bytes - (status->host_index - + status->dSP_index); } static void outstream_write(struct hpi_adapter_obj *pao, @@ -954,7 +954,7 @@ static void outstream_write(struct hpi_adapter_obj *pao, struct hpi_hw_obj *phw = pao->priv; struct bus_master_interface *interface = phw->p_interface_buffer; struct hpi_hostbuffer_status *status; - long space_available; + u32 space_available; if (!phw->outstream_host_buffer_size[phm->obj_index]) { /* there is no BBM buffer, write via message */ @@ -1007,7 +1007,7 @@ static void outstream_write(struct hpi_adapter_obj *pao, } space_available = outstream_get_space_available(status); - if (space_available < (long)phm->u.d.u.data.data_size) { + if (space_available < phm->u.d.u.data.data_size) { phr->error = HPI_ERROR_INVALID_DATASIZE; return; } @@ -1018,7 +1018,7 @@ static void outstream_write(struct hpi_adapter_obj *pao, && hpios_locked_mem_valid(&phw->outstream_host_buffers[phm-> obj_index])) { u8 *p_bbm_data; - long l_first_write; + u32 l_first_write; u8 *p_app_data = (u8 *)phm->u.d.u.data.pb_data; if (hpios_locked_mem_get_virt_addr(&phw-> @@ -1248,9 +1248,9 @@ static void instream_start(struct hpi_adapter_obj *pao, hw_message(pao, phm, phr); } -static long instream_get_bytes_available(struct hpi_hostbuffer_status *status) +static u32 instream_get_bytes_available(struct hpi_hostbuffer_status *status) { - return (long)(status->dSP_index) - (long)(status->host_index); + return status->dSP_index - status->host_index; } static void instream_read(struct hpi_adapter_obj *pao, @@ -1259,9 +1259,9 @@ static void instream_read(struct hpi_adapter_obj *pao, struct hpi_hw_obj *phw = pao->priv; struct bus_master_interface *interface = phw->p_interface_buffer; struct hpi_hostbuffer_status *status; - long data_available; + u32 data_available; u8 *p_bbm_data; - long l_first_read; + u32 l_first_read; u8 *p_app_data = (u8 *)phm->u.d.u.data.pb_data; if (!phw->instream_host_buffer_size[phm->obj_index]) { @@ -1272,7 +1272,7 @@ static void instream_read(struct hpi_adapter_obj *pao, status = &interface->instream_host_buffer_status[phm->obj_index]; data_available = instream_get_bytes_available(status); - if (data_available < (long)phm->u.d.u.data.data_size) { + if (data_available < phm->u.d.u.data.data_size) { phr->error = HPI_ERROR_INVALID_DATASIZE; return; } diff --git a/sound/soc/au1x/psc-i2s.c b/sound/soc/au1x/psc-i2s.c index 495be6e..24454c9 100644 --- a/sound/soc/au1x/psc-i2s.c +++ b/sound/soc/au1x/psc-i2s.c @@ -300,7 +300,7 @@ struct snd_soc_dai au1xpsc_i2s_dai = { }; EXPORT_SYMBOL(au1xpsc_i2s_dai); -static int __init au1xpsc_i2s_drvprobe(struct platform_device *pdev) +static int __devinit au1xpsc_i2s_drvprobe(struct platform_device *pdev) { struct resource *r; unsigned long sel; diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 31ac553..5da30eb 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -83,8 +83,8 @@ config SND_SOC_ALL_CODECS config SND_SOC_WM_HUBS tristate - default y if SND_SOC_WM8993=y - default m if SND_SOC_WM8993=m + default y if SND_SOC_WM8993=y || SND_SOC_WM8994=y + default m if SND_SOC_WM8993=m || SND_SOC_WM8994=m config SND_SOC_AC97_CODEC tristate diff --git a/sound/soc/codecs/wm8727.c b/sound/soc/codecs/wm8727.c index 1072621..9d1df26 100644 --- a/sound/soc/codecs/wm8727.c +++ b/sound/soc/codecs/wm8727.c @@ -127,6 +127,8 @@ static __devinit int wm8727_platform_probe(struct platform_device *pdev) goto err_codec; } + return 0; + err_codec: snd_soc_unregister_codec(codec); err: diff --git a/sound/soc/codecs/wm8776.c b/sound/soc/codecs/wm8776.c index 7e4a627..4e212ed 100644 --- a/sound/soc/codecs/wm8776.c +++ b/sound/soc/codecs/wm8776.c @@ -94,7 +94,6 @@ SOC_DAPM_SINGLE("Bypass Switch", WM8776_OUTMUX, 2, 1, 0), static const struct snd_soc_dapm_widget wm8776_dapm_widgets[] = { SND_SOC_DAPM_INPUT("AUX"), -SND_SOC_DAPM_INPUT("AUX"), SND_SOC_DAPM_INPUT("AIN1"), SND_SOC_DAPM_INPUT("AIN2"), diff --git a/sound/soc/codecs/wm8988.c b/sound/soc/codecs/wm8988.c index 0417dae..19ad590 100644 --- a/sound/soc/codecs/wm8988.c +++ b/sound/soc/codecs/wm8988.c @@ -885,7 +885,6 @@ static int wm8988_register(struct wm8988_priv *wm8988, ret = snd_soc_register_dai(&wm8988_dai); if (ret != 0) { dev_err(codec->dev, "Failed to register DAI: %d\n", ret); - snd_soc_unregister_codec(codec); goto err_codec; } diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c index 79f0f4a..d395509 100644 --- a/sound/soc/davinci/davinci-mcasp.c +++ b/sound/soc/davinci/davinci-mcasp.c @@ -612,7 +612,6 @@ static void davinci_hw_common_param(struct davinci_audio_dev *dev, int stream) NUMDMA_MASK); mcasp_mod_bits(dev->base + DAVINCI_MCASP_WFIFOCTL, ((dev->txnumevt * tx_ser) << 8), NUMEVT_MASK); - mcasp_set_bits(dev->base + DAVINCI_MCASP_WFIFOCTL, FIFO_ENABLE); } if (dev->rxnumevt && stream == SNDRV_PCM_STREAM_CAPTURE) { @@ -623,7 +622,6 @@ static void davinci_hw_common_param(struct davinci_audio_dev *dev, int stream) NUMDMA_MASK); mcasp_mod_bits(dev->base + DAVINCI_MCASP_RFIFOCTL, ((dev->rxnumevt * rx_ser) << 8), NUMEVT_MASK); - mcasp_set_bits(dev->base + DAVINCI_MCASP_RFIFOCTL, FIFO_ENABLE); } } diff --git a/sound/soc/fsl/mpc5200_dma.h b/sound/soc/fsl/mpc5200_dma.h index 22208b3..e1ec6d9 100644 --- a/sound/soc/fsl/mpc5200_dma.h +++ b/sound/soc/fsl/mpc5200_dma.h @@ -73,7 +73,7 @@ struct psc_dma { }; /* Utility for retrieving psc_dma_stream structure from a substream */ -inline struct psc_dma_stream * +static inline struct psc_dma_stream * to_psc_dma_stream(struct snd_pcm_substream *substream, struct psc_dma *psc_dma) { if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c index 1941a35..d256f5f 100644 --- a/sound/soc/pxa/spitz.c +++ b/sound/soc/pxa/spitz.c @@ -328,38 +328,6 @@ static struct snd_soc_device spitz_snd_devdata = { .codec_dev = &soc_codec_dev_wm8750, }; -/* - * FIXME: This is a temporary bodge to avoid cross-tree merge issues. - * New drivers should register the wm8750 I2C device in the machine - * setup code (under arch/arm for ARM systems). - */ -static int wm8750_i2c_register(void) -{ - struct i2c_board_info info; - struct i2c_adapter *adapter; - struct i2c_client *client; - - memset(&info, 0, sizeof(struct i2c_board_info)); - info.addr = 0x1b; - strlcpy(info.type, "wm8750", I2C_NAME_SIZE); - - adapter = i2c_get_adapter(0); - if (!adapter) { - printk(KERN_ERR "can't get i2c adapter 0\n"); - return -ENODEV; - } - - client = i2c_new_device(adapter, &info); - i2c_put_adapter(adapter); - if (!client) { - printk(KERN_ERR "can't add i2c device at 0x%x\n", - (unsigned int)info.addr); - return -ENODEV; - } - - return 0; -} - static struct platform_device *spitz_snd_device; static int __init spitz_init(void) @@ -369,10 +337,6 @@ static int __init spitz_init(void) if (!(machine_is_spitz() || machine_is_borzoi() || machine_is_akita())) return -ENODEV; - ret = wm8750_i2c_setup(); - if (ret != 0) - return ret; - spitz_snd_device = platform_device_alloc("soc-audio", -1); if (!spitz_snd_device) return -ENOMEM; diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c index 3396a0d..ec4acac 100644 --- a/sound/soc/sh/fsi.c +++ b/sound/soc/sh/fsi.c @@ -683,20 +683,15 @@ static int fsi_dai_startup(struct snd_pcm_substream *substream, /* clock inversion (CKG2) */ data = 0; - switch (SH_FSI_INVERSION_MASK & flags) { - case SH_FSI_LRM_INV: - data = 1 << 12; - break; - case SH_FSI_BRM_INV: - data = 1 << 8; - break; - case SH_FSI_LRS_INV: - data = 1 << 4; - break; - case SH_FSI_BRS_INV: - data = 1 << 0; - break; - } + if (SH_FSI_LRM_INV & flags) + data |= 1 << 12; + if (SH_FSI_BRM_INV & flags) + data |= 1 << 8; + if (SH_FSI_LRS_INV & flags) + data |= 1 << 4; + if (SH_FSI_BRS_INV & flags) + data |= 1 << 0; + fsi_reg_write(fsi, CKG2, data); /* do fmt, di fmt */ @@ -726,15 +721,15 @@ static int fsi_dai_startup(struct snd_pcm_substream *substream, break; case SH_FSI_FMT_TDM: msg = "TDM"; - data = CR_FMT(CR_TDM) | (fsi->chan - 1); fsi->chan = is_play ? SH_FSI_GET_CH_O(flags) : SH_FSI_GET_CH_I(flags); + data = CR_FMT(CR_TDM) | (fsi->chan - 1); break; case SH_FSI_FMT_TDM_DELAY: msg = "TDM Delay"; - data = CR_FMT(CR_TDM_D) | (fsi->chan - 1); fsi->chan = is_play ? SH_FSI_GET_CH_O(flags) : SH_FSI_GET_CH_I(flags); + data = CR_FMT(CR_TDM_D) | (fsi->chan - 1); break; default: dev_err(dai->dev, "unknown format.\n"); diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c index 4c7b051..1bc56b2 100644 --- a/sound/spi/at73c213.c +++ b/sound/spi/at73c213.c @@ -69,7 +69,6 @@ struct snd_at73c213 { int irq; int period; unsigned long bitrate; - struct clk *bitclk; struct ssc_device *ssc; struct spi_device *spi; u8 spi_wbuffer[2]; diff --git a/sound/usb/clock.c b/sound/usb/clock.c index b7aadd6..b585511 100644 --- a/sound/usb/clock.c +++ b/sound/usb/clock.c @@ -103,7 +103,8 @@ static int uac_clock_selector_get_val(struct snd_usb_audio *chip, int selector_i ret = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), UAC2_CS_CUR, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, - UAC2_CX_CLOCK_SELECTOR << 8, selector_id << 8, + UAC2_CX_CLOCK_SELECTOR << 8, + snd_usb_ctrl_intf(chip) | (selector_id << 8), &buf, sizeof(buf), 1000); if (ret < 0) @@ -120,7 +121,8 @@ static bool uac_clock_source_is_valid(struct snd_usb_audio *chip, int source_id) err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR, USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, - UAC2_CS_CONTROL_CLOCK_VALID << 8, source_id << 8, + UAC2_CS_CONTROL_CLOCK_VALID << 8, + snd_usb_ctrl_intf(chip) | (source_id << 8), &data, sizeof(data), 1000); if (err < 0) { @@ -269,7 +271,8 @@ static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface, data[3] = rate >> 24; if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC2_CS_CUR, USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT, - UAC2_CS_CONTROL_SAM_FREQ << 8, clock << 8, + UAC2_CS_CONTROL_SAM_FREQ << 8, + snd_usb_ctrl_intf(chip) | (clock << 8), data, sizeof(data), 1000)) < 0) { snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d (v2)\n", dev->devnum, iface, fmt->altsetting, rate); @@ -278,7 +281,8 @@ static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface, if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR, USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, - UAC2_CS_CONTROL_SAM_FREQ << 8, clock << 8, + UAC2_CS_CONTROL_SAM_FREQ << 8, + snd_usb_ctrl_intf(chip) | (clock << 8), data, sizeof(data), 1000)) < 0) { snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n", dev->devnum, iface, fmt->altsetting); diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c index 9593b91..6f6596c 100644 --- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -427,6 +427,7 @@ int snd_usb_parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no) if (snd_usb_parse_audio_format(chip, fp, format, fmt, stream, alts) < 0) { kfree(fp->rate_table); kfree(fp); + fp = NULL; continue; } diff --git a/sound/usb/format.c b/sound/usb/format.c index 5367cd1..30364ab 100644 --- a/sound/usb/format.c +++ b/sound/usb/format.c @@ -206,6 +206,60 @@ static int parse_audio_format_rates_v1(struct snd_usb_audio *chip, struct audiof } /* + * Helper function to walk the array of sample rate triplets reported by + * the device. The problem is that we need to parse whole array first to + * get to know how many sample rates we have to expect. + * Then fp->rate_table can be allocated and filled. + */ +static int parse_uac2_sample_rate_range(struct audioformat *fp, int nr_triplets, + const unsigned char *data) +{ + int i, nr_rates = 0; + + fp->rates = fp->rate_min = fp->rate_max = 0; + + for (i = 0; i < nr_triplets; i++) { + int min = combine_quad(&data[2 + 12 * i]); + int max = combine_quad(&data[6 + 12 * i]); + int res = combine_quad(&data[10 + 12 * i]); + int rate; + + if ((max < 0) || (min < 0) || (res < 0) || (max < min)) + continue; + + /* + * for ranges with res == 1, we announce a continuous sample + * rate range, and this function should return 0 for no further + * parsing. + */ + if (res == 1) { + fp->rate_min = min; + fp->rate_max = max; + fp->rates = SNDRV_PCM_RATE_CONTINUOUS; + return 0; + } + + for (rate = min; rate <= max; rate += res) { + if (fp->rate_table) + fp->rate_table[nr_rates] = rate; + if (!fp->rate_min || rate < fp->rate_min) + fp->rate_min = rate; + if (!fp->rate_max || rate > fp->rate_max) + fp->rate_max = rate; + fp->rates |= snd_pcm_rate_to_rate_bit(rate); + + nr_rates++; + + /* avoid endless loop */ + if (res == 0) + break; + } + } + + return nr_rates; +} + +/* * parse the format descriptor and stores the possible sample rates * on the audioformat table (audio class v2). */ @@ -215,13 +269,20 @@ static int parse_audio_format_rates_v2(struct snd_usb_audio *chip, { struct usb_device *dev = chip->dev; unsigned char tmp[2], *data; - int i, nr_rates, data_size, ret = 0; + int nr_triplets, data_size, ret = 0; int clock = snd_usb_clock_find_source(chip, chip->ctrl_intf, fp->clock); + if (clock < 0) { + snd_printk(KERN_ERR "%s(): unable to find clock source (clock %d)\n", + __func__, clock); + goto err; + } + /* get the number of sample rates first by only fetching 2 bytes */ ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE, USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, - UAC2_CS_CONTROL_SAM_FREQ << 8, clock << 8, + UAC2_CS_CONTROL_SAM_FREQ << 8, + snd_usb_ctrl_intf(chip) | (clock << 8), tmp, sizeof(tmp), 1000); if (ret < 0) { @@ -230,8 +291,8 @@ static int parse_audio_format_rates_v2(struct snd_usb_audio *chip, goto err; } - nr_rates = (tmp[1] << 8) | tmp[0]; - data_size = 2 + 12 * nr_rates; + nr_triplets = (tmp[1] << 8) | tmp[0]; + data_size = 2 + 12 * nr_triplets; data = kzalloc(data_size, GFP_KERNEL); if (!data) { ret = -ENOMEM; @@ -241,7 +302,8 @@ static int parse_audio_format_rates_v2(struct snd_usb_audio *chip, /* now get the full information */ ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE, USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, - UAC2_CS_CONTROL_SAM_FREQ << 8, clock << 8, + UAC2_CS_CONTROL_SAM_FREQ << 8, + snd_usb_ctrl_intf(chip) | (clock << 8), data, data_size, 1000); if (ret < 0) { @@ -251,26 +313,28 @@ static int parse_audio_format_rates_v2(struct snd_usb_audio *chip, goto err_free; } - fp->rate_table = kmalloc(sizeof(int) * nr_rates, GFP_KERNEL); + /* Call the triplet parser, and make sure fp->rate_table is NULL. + * We just use the return value to know how many sample rates we + * will have to deal with. */ + kfree(fp->rate_table); + fp->rate_table = NULL; + fp->nr_rates = parse_uac2_sample_rate_range(fp, nr_triplets, data); + + if (fp->nr_rates == 0) { + /* SNDRV_PCM_RATE_CONTINUOUS */ + ret = 0; + goto err_free; + } + + fp->rate_table = kmalloc(sizeof(int) * fp->nr_rates, GFP_KERNEL); if (!fp->rate_table) { ret = -ENOMEM; goto err_free; } - fp->nr_rates = 0; - fp->rate_min = fp->rate_max = 0; - - for (i = 0; i < nr_rates; i++) { - int rate = combine_quad(&data[2 + 12 * i]); - - fp->rate_table[fp->nr_rates] = rate; - if (!fp->rate_min || rate < fp->rate_min) - fp->rate_min = rate; - if (!fp->rate_max || rate > fp->rate_max) - fp->rate_max = rate; - fp->rates |= snd_pcm_rate_to_rate_bit(rate); - fp->nr_rates++; - } + /* Call the triplet parser again, but this time, fp->rate_table is + * allocated, so the rates will be stored */ + parse_uac2_sample_rate_range(fp, nr_triplets, data); err_free: kfree(data); diff --git a/sound/usb/helper.h b/sound/usb/helper.h index a6b0e51..09bd943 100644 --- a/sound/usb/helper.h +++ b/sound/usb/helper.h @@ -28,5 +28,9 @@ unsigned char snd_usb_parse_datainterval(struct snd_usb_audio *chip, #define snd_usb_get_speed(dev) ((dev)->speed) #endif +static inline int snd_usb_ctrl_intf(struct snd_usb_audio *chip) +{ + return get_iface_desc(chip->ctrl_intf)->bInterfaceNumber; +} #endif /* __USBAUDIO_HELPER_H */ diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index a060d00..736d134 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -297,20 +297,27 @@ static int get_ctl_value_v1(struct usb_mixer_elem_info *cval, int request, int v static int get_ctl_value_v2(struct usb_mixer_elem_info *cval, int request, int validx, int *value_ret) { - unsigned char buf[14]; /* enough space for one range of 4 bytes */ + unsigned char buf[2 + 3*sizeof(__u16)]; /* enough space for one range */ unsigned char *val; - int ret; + int ret, size; __u8 bRequest; - bRequest = (request == UAC_GET_CUR) ? - UAC2_CS_CUR : UAC2_CS_RANGE; + if (request == UAC_GET_CUR) { + bRequest = UAC2_CS_CUR; + size = sizeof(__u16); + } else { + bRequest = UAC2_CS_RANGE; + size = sizeof(buf); + } + + memset(buf, 0, sizeof(buf)); ret = snd_usb_ctl_msg(cval->mixer->chip->dev, usb_rcvctrlpipe(cval->mixer->chip->dev, 0), bRequest, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, validx, cval->mixer->ctrlif | (cval->id << 8), - buf, sizeof(buf), 1000); + buf, size, 1000); if (ret < 0) { snd_printk(KERN_ERR "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n", @@ -318,6 +325,8 @@ static int get_ctl_value_v2(struct usb_mixer_elem_info *cval, int request, int v return ret; } + /* FIXME: how should we handle multiple triplets here? */ + switch (request) { case UAC_GET_CUR: val = buf; @@ -1098,6 +1107,19 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc, } break; + case USB_ID(0x046d, 0x0809): + case USB_ID(0x046d, 0x0991): + /* Most audio usb devices lie about volume resolution. + * Most Logitech webcams have res = 384. + * Proboly there is some logitech magic behind this number --fishor + */ + if (!strcmp(kctl->id.name, "Mic Capture Volume")) { + snd_printk(KERN_INFO + "set resolution quirk: cval->res = 384\n"); + cval->res = 384; + } + break; + } snd_printdd(KERN_INFO "[%d] FU [%s] ch = %d, val = %d/%d/%d\n", |