aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/ata
Commit message (Collapse)AuthorAgeFilesLines
* libata-sff: remove harmful BUG_ON from ata_bmdma_qc_issueMark Lord2010-08-251-4/+0
| | | | | | | | | | | | | Remove harmful BUG_ON() from ata_bmdma_qc_issue(), as it casts too wide of a net and breaks sata_mv. It also crashes the kernel while doing the BUG_ON(). There's already a WARN_ON_ONCE() further down to catch the case of POLLING for a BMDMA operation. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Cc: stable@kernel.org
* sata_mv: fix broken DSM/TRIM support (v2)Mark Lord2010-08-251-7/+37
| | | | | | | | | | | | | | | | | Fix DSM/TRIM commands in sata_mv (v2). These need to be issued using old-school "BM DMA", rather than via the EDMA host queue. Since the chips don't have proper BM DMA status, we need to be more careful with setting the ATA_DMA_INTR bit, since DSM/TRIM often has a long delay between "DMA complete" and "command complete". GEN_I chips don't have BM DMA, so no TRIM for them. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Cc: stable@kernel.org
* libata: be less of a drama queen on empty data commandsTejun Heo2010-08-251-4/+7
| | | | | | | | | | ata_qc_issue() BUG_ON()s on data commands w/o data, which may be submitted via SG_IO. Be less of a drama queen and just trigger WARN_ON_ONCE() and fail the command with AC_ERR_SYSTEM. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Stefan Hübner <stefan.huebner@stud.tu-ilmenau.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* [libata] sata_dwc_460ex: signdness bugDan Carpenter2010-08-251-1/+1
| | | | | | | | dma_dwc_xfer_setup() returns an int and "dma_chan" needs to be signed for the error handling to work. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* ahci: add HFLAG_YES_FBS and apply it to 88SE9128Tejun Heo2010-08-253-2/+26
| | | | | | | | 88SE9128 can do FBS and sets it in HOST_CAP but forgets to set FBSCP in PORT_CMD. Implement AHCI_HFLAG_YES_FBS and apply it to 88SE9128. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: remove no longer needed pata_winbond driverBartlomiej Zolnierkiewicz2010-08-254-285/+14
| | | | | | | | | | | | Winbond W83759A controller is fully supported by pata_legacy driver so remove no longer needed pata_winbond driver. Leave PATA_WINBOND_VLB config option for compatibility reasons and teach pata_legacy to preserve the old behavior of pata_winbond driver. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* pata_cmd64x: revert commit d62f5576Tejun Heo2010-08-251-6/+0
| | | | | | | | | | | | | | | Commit d62f5576 (pata_cmd64x: fix handling of address setup timings) incorrectly called ata_timing_compute() on UDMA mode on 0 @UT leading to devide by zero fault. Revert it until better fix is available. This is reported in bko#16607 by Milan Kocian who also root caused it. https://bugzilla.kernel.org/show_bug.cgi?id=16607 Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-root-caused-by: Milan Kocian <milan.kocian@wq.cz> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* ata: update for of_device to platform_device replacementStephen Rothwell2010-08-161-2/+2
| | | | | Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* Merge branch 'linus' into releaseLen Brown2010-08-1521-219/+3074
|\ | | | | | | | | | | | | Conflicts: drivers/acpi/debug.c Signed-off-by: Len Brown <len.brown@intel.com>
| * Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2010-08-123-10/+10
| |\ | | | | | | | | | | | | | | | | | | * 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: mmc_spi: Fix unterminated of_match_table of/sparc: fix build regression from of_device changes of/device: Replace struct of_device with struct platform_device
| | * of/device: Replace struct of_device with struct platform_deviceGrant Likely2010-08-063-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | of_device is just an alias for platform_device, so remove it entirely. Also replace to_of_device() with to_platform_device() and update comment blocks. This patch was initially generated from the following semantic patch, and then edited by hand to pick up the bits that coccinelle didn't catch. @@ @@ -struct of_device +struct platform_device Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: David S. Miller <davem@davemloft.net>
| * | Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2010-08-113-0/+424
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (226 commits) ARM: 6323/1: cam60: don't use __init for cam60_spi_{flash_platform_data,partitions} ARM: 6324/1: cam60: move cam60_spi_devices to .init.data ARM: 6322/1: imx/pca100: Fix name of spi platform data ARM: 6321/1: fix syntax error in main Kconfig file ARM: 6297/1: move U300 timer to dynamic clock lookup ARM: 6296/1: clock U300 intcon and timer properly ARM: 6295/1: fix U300 apb_pclk split ARM: 6306/1: fix inverted MMC card detect in U300 ARM: 6299/1: errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID ARM: 6294/1: etm: do a dummy read from OSSRR during initialization ARM: 6292/1: coresight: add ETM management registers ARM: 6288/1: ftrace: document mcount formats ARM: 6287/1: ftrace: clean up mcount assembly indentation ARM: 6286/1: fix Thumb-2 decompressor broken by "Auto calculate ZRELADDR" ARM: 6281/1: video/imxfb.c: allow usage without BACKLIGHT_CLASS_DEVICE ARM: 6280/1: imx: Fix build failure when including <mach/gpio.h> without <linux/spinlock.h> ARM: S5PV210: Fix on missing s3c-sdhci card detection method for hsmmc3 ARM: S5P: Fix on missing S5P_DEV_FIMC in plat-s5p/Kconfig ARM: S5PV210: Override FIMC driver name on Aquila board ARM: S5PC100: enable FIMC on SMDKC100 ... Fix up conflicts in arch/arm/mach-{s5pc100,s5pv210}/cpu.c due to different subsystem 'setname' calls, and trivial port types in include/linux/serial_core.h
| | * \ Merge branches 'master' and 'devel' into for-linusRussell King2010-08-103-0/+424
| | |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/Kconfig arch/arm/mm/Kconfig
| | | * \ Merge branch 'devel' of ↵Russell King2010-08-063-0/+424
| | | |\ \ | | | | |/ | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel-stable Conflicts: arch/arm/mach-pxa/palmt5.c arch/arm/mach-pxa/palmtreo.c
| | | | * [ARM] pata_pxa: DMA-capable PATA driverMarek Vasut2010-06-183-0/+424
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a driver for a harddrive attached to PXA address and data bus. Unlike pata_platform, this driver allows usage of PXA DMA controller, making the transmission speed 3x higher. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
| * | | | docbook: fix fatal error from libataRandy Dunlap2010-08-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'make htmldocs' has a fatal error when processing libata.xml, as seen below. The string "Example patterns:" (or any string with "example.*:" in it AFAIK) causes some part of the doc generation tool chain to try to produce an <informalexample> block without a beginning <para>, but there is an ending </para> generated, which throws things out of kilter. I don't even know where (what program) this is happening in. I searched in docproc and xmlto and in some XML stylesheets without finding anything. If anyone can give me pointers about this, please do. Until this is fixed, let's just spell "Example" as "Sample" and match up the double quotation marks while there. Documentation/DocBook/libata.xml:6575: parser error : Opening and ending tag mismatch: programlisting line 6573 and para </para><para> ^ Documentation/DocBook/libata.xml:6580: parser error : Opening and ending tag mismatch: para line 6575 and programlisting </programlisting></informalexample> ^ unable to parse Documentation/DocBook/libata.xml make[2]: *** [Documentation/DocBook/libata.html] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | | | Merge branch 'for-2.6.36' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2010-08-101-2/+2
| |\ \ \ \ | | |/ / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits) block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n xen-blkfront: fix missing out label blkdev: fix blkdev_issue_zeroout return value block: update request stacking methods to support discards block: fix missing export of blk_types.h writeback: fix bad _bh spinlock nesting drbd: revert "delay probes", feature is being re-implemented differently drbd: Initialize all members of sync_conf to their defaults [Bugz 315] drbd: Disable delay probes for the upcomming release writeback: cleanup bdi_register writeback: add new tracepoints writeback: remove unnecessary init_timer call writeback: optimize periodic bdi thread wakeups writeback: prevent unnecessary bdi threads wakeups writeback: move bdi threads exiting logic to the forker thread writeback: restructure bdi forker loop a little writeback: move last_active to bdi writeback: do not remove bdi from bdi_list writeback: simplify bdi code a little writeback: do not lose wake-ups in bdi threads ... Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and drivers/scsi/scsi_error.c as per Jens.
| | * | | block: unify flags for struct bio and struct requestChristoph Hellwig2010-08-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the current bio flags and reuse the request flags for the bio, too. This allows to more easily trace the type of I/O from the filesystem down to the block driver. There were two flags in the bio that were missing in the requests: BIO_RW_UNPLUG and BIO_RW_AHEAD. Also I've renamed two request flags that had a superflous RW in them. Note that the flags are in bio.h despite having the REQ_ name - as blkdev.h includes bio.h that is the only way to go for now. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
| | * | | block: remove wrappers for request type/flagsChristoph Hellwig2010-08-071-1/+1
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove all the trivial wrappers for the cmd_type and cmd_flags fields in struct requests. This allows much easier grepping for different request types instead of unwinding through macros. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
| * | | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds2010-08-075-30/+14
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (55 commits) workqueue: mark init_workqueues() as early_initcall() workqueue: explain for_each_*cwq_cpu() iterators fscache: fix build on !CONFIG_SYSCTL slow-work: kill it gfs2: use workqueue instead of slow-work drm: use workqueue instead of slow-work cifs: use workqueue instead of slow-work fscache: drop references to slow-work fscache: convert operation to use workqueue instead of slow-work fscache: convert object to use workqueue instead of slow-work workqueue: fix how cpu number is stored in work->data workqueue: fix mayday_mask handling on UP workqueue: fix build problem on !CONFIG_SMP workqueue: fix locking in retry path of maybe_create_worker() async: use workqueue for worker pool workqueue: remove WQ_SINGLE_CPU and use WQ_UNBOUND instead workqueue: implement unbound workqueue workqueue: prepare for WQ_UNBOUND implementation libata: take advantage of cmwq and remove concurrency limitations workqueue: fix worker management invocation without pending works ... Fixed up conflicts in fs/cifs/* as per Tejun. Other trivial conflicts in include/linux/workqueue.h, kernel/trace/Kconfig and kernel/workqueue.c
| | * | | libata: take advantage of cmwq and remove concurrency limitationsTejun Heo2010-07-025-30/+14
| | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | libata has two concurrency related limitations. a. ata_wq which is used for polling PIO has single thread per CPU. If there are multiple devices doing polling PIO on the same CPU, they can't be executed simultaneously. b. ata_aux_wq which is used for SCSI probing has single thread. In cases where SCSI probing is stalled for extended period of time which is possible for ATAPI devices, this will stall all probing. #a is solved by increasing maximum concurrency of ata_wq. Please note that polling PIO might be used under allocation path and thus needs to be served by a separate wq with a rescuer. #b is solved by using the default wq instead and achieving exclusion via per-port mutex. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Jeff Garzik <jgarzik@pobox.com>
| * | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds2010-08-061-19/+19
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: avoid buffer overflow in pcmcia_setup_isa_irq pcmcia: do not request windows if you don't need to pcmcia: insert PCMCIA device resources into resource tree pcmcia: export resource information to sysfs pcmcia: use struct resource for PCMCIA devices, part 2 pcmcia: remove memreq_t pcmcia: move local definitions out of include/pcmcia/cs.h pcmcia: do not use io_req_t when calling pcmcia_request_io() pcmcia: do not use io_req_t after call to pcmcia_request_io() pcmcia: use struct resource for PCMCIA devices pcmcia: clean up cs.h pcmcia: use pcmica_{read,write}_config_byte pcmcia: remove cs_types.h pcmcia: remove unused flag, simplify headers pcmcia: remove obsolete CS_EVENT_ definitions pcmcia: split up central event handler pcmcia: simplify event callback pcmcia: remove obsolete ioctl Conflicts in: - drivers/staging/comedi/drivers/* - drivers/staging/wlags49_h2/wl_cs.c due to dev_info_t and whitespace changes
| | * | | pcmcia: do not use io_req_t when calling pcmcia_request_io()Dominik Brodowski2010-08-031-14/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of io_req_t, drivers are now requested to fill out struct pcmcia_device *p_dev->resource[0,1] for up to two ioport ranges. After a call to pcmcia_request_io(), the ports found there are reserved, after calling pcmcia_request_configuration(), they may be used. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Michael Buesch <mb@bu3sch.de> Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/) Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| | * | | pcmcia: do not use io_req_t after call to pcmcia_request_io()Dominik Brodowski2010-08-031-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After pcmcia_request_io(), do not make use of the values stored in io_req_t, but instead use those found in struct pcmcia_device->resource[]. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/) Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| | * | | pcmcia: remove cs_types.hDominik Brodowski2010-07-301-1/+0
| | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove cs_types.h which is no longer needed: Most definitions aren't used at all, a few can be made away with, and two remaining definitions (typedefs, unfortunatley) may be moved to more specific places. CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/) Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * | | sata_fsl,mv,nv: prepare for NCQ command completion updateTejun Heo2010-08-013-51/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make the following changes to prepare for NCQ command completion update. Changes made by this patch don't cause any functional difference. * sata_fsl_host_intr(): rename the local variable qc_active to done_mask as that's what it is. * mv_process_crpb_response(): restructure if clause for easier update. * nv_adma_interrupt(): drop unnecessary error variable. * nv_swncq_sdbfis(): drop unnecessary nr_done and return 0 on success. Typo fix. * nv_swncq_dmafis(): drop unused return value and return void. * nv_swncq_host_interrupt(): drop unnecessary return value handling. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ashish Kalra <ashish.kalra@freescale.com> Cc: Saeed Bishara <saeed@marvell.com> Cc: Mark Lord <liml@rtr.ca> Cc: Robert Hancock <hancockr@shaw.ca> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * | | ata: Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used)Peter Huewe2010-08-011-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and .subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the PCI_VDEVICE macro, and thus improves readability. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * | | ata_piix: fix locking around SIDPR accessTejun Heo2010-08-011-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SIDPR window registers are shared across ports and as each access is done in two steps, accesses to different ports under EH may race. This primarily is caused by incorrect host locking in EH context and should be fixed by defining locking requirements for each EH operation which can be used during EH and enforcing them but for now work around the problem by adding a dedicated SIDPR lock and grabbing it for each SIDPR access. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Mark Knecht <markknecht@gmail.com> Reported-by: Paul Check <paul@thechecks.ca> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * | | [libata] update blacklist for new hyphenated pattern ranges (v2)Mark Lord2010-08-011-10/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Take further advantage of the new glob_match() function to reduce the blacklist size, this time making use of "character ranges" in the patterns. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * | | libata: allow hyphenated pattern rangesMark Lord2010-08-011-4/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable use of hyphenated pattern ranges in glob_match(), similar to how shell globbing works, and how developers might expect things to work. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * | | ata_generic: drop hard coded DMA force logic for CENATEKTejun Heo2010-08-011-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 1529c69adc (ata_generic: implement ATA_GEN_* flags and force enable DMA on MBP 7,1) implemented ATA_GEN_FORCE_DMA for forcing DMA mode and applied it to CENATEK but forgot to remove the original hard coded logic. This is removal of redundant logic and doesn't affect correctness. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * | | [libata] ahci: Fix warning: comparison between 'enum <anonymous>' and 'enum ↵Justin P. Mattock2010-08-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | <anonymous>' The below patch casts ATA_MAX_QUEUE to int because GCC will give a warning message about the two different enum blocks: CC drivers/ata/ahci.o drivers/ata/ahci.c: In function 'ahci_init_one': drivers/ata/ahci.c:1045:2: warning: comparison between 'enum <anonymous>' and 'enum <anonymous>' Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * | | [libata] add ATA_CMD_DSM to ata_get_cmd_descriptFUJITA Tomonori2010-08-011-0/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * | | [libata] Add Samsung PATA controller driver, pata_samsung_cfAbhilash Kesavan2010-08-013-0/+693
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds support for the Samsung PATA controller. This driver is based on the Libata subsystem and references the earlier patches sent for IDE subsystem. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Acked-by: Sergei Shtylyov <sshtylyov@mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * | | [libata] Add 460EX on-chip SATA driver, sata_dwc_460exRupjyoti Sarmah2010-08-013-0/+1766
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables the on-chip DWC SATA controller of the AppliedMicro processor 460EX. Signed-off-by: Rupjyoti Sarmah <rsarmah@appliedmicro.com> Signed-off-by: Mark Miesfeld <mmiesfeld@appliedmicro.com> Signed-off-by: Prodyut Hazarika <phazarika@appliedmicro.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * | | libata: reduce blacklist size even more (v2)Mark Lord2010-08-011-10/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Take further advantage of the new glob_match() function to reduce the blacklist size. There are even more savings possible, but how far do we want to go with this? Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * | | libata: reduce blacklist size (v2)Mark Lord2010-08-011-54/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Take advantage of the new glob_match() function to reduce the blacklist size somewhat. There are further savings possible, but these are the most obvious biggies. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * | | libata: glob_match for ata_device_blacklist (v2)Mark Lord2010-08-011-21/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace rudimentry pattern matching with more capable shell-style globbing. This will enable shrinking ata_device_blacklist[] table in subsequent patches, and helps with future editions to the table, such as matching only the end of a firmware revision string etc.. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * | | ahci_platform: Remove unneeded ahci_driver.probe assignmentAnton Vorontsov2010-08-011-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver is using platform_driver_probe() during initialization, so ahci_driver.probe hook is never used. But it causes the following (harmless, luckily) section mismatch: WARNING: vmlinux.o(.data+0x2fb20): Section mismatch in reference from the variable ahci_driver to the function .init.text:ahci_probe() This patch removes the ahci_driver.probe assignment, thus fixes the warning. p.s. Note that there's another patch[1] from Rene Bolldorf that tried to solve the same issue by __refdata annotation. __refdata says that this reference is actually OK, but in fact it is not OK, because dereferencing .probe() will cause problems. So the proper fix is to remove the assignment. [1] http://kerneltrap.org/mailarchive/linux-kernel/2010/3/18/4549547 Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * | | ahci_platform: Provide for vendor specific initJassi Brar2010-08-011-10/+15
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some AHCI implementations may use Vendor Specific HBA[A0h, FFh] and/or Port[70h, 7Fh] registers to 'prepare' for initialization. For that, the platform needs memory mapped address of AHCI registers. This patch adds the 'mmio' argument and reorders the call to platform init function. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* | | gcc-4.6: ACPI: fix unused but set variables in ACPIAndi Kleen2010-08-151-6/+0
|/ / | | | | | | | | | | | | | | | | Some minor improvements in error handling, but overall it was mostly dead code. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
* | ata_generic: implement ATA_GEN_* flags and force enable DMA on MBP 7,1Tejun Heo2010-07-011-7/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IDE mode of MCP89 on MBP 7,1 doesn't set DMA enable bits in the BMDMA status register. Make the following changes to work around the problem. * Instead of using hard coded 1 in id->driver_data as class code match, use ATA_GEN_CLASS_MATCH and carry the matched id in host->private_data. * Instead of matching PCI_VENDOR_ID_CENATEK, use ATA_GEN_FORCE_DMA flag in id instead. * Add ATA_GEN_FORCE_DMA to the id entry of MBP 7,1. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Peer Chen <pchen@nvidia.com> Cc: stable@kernel.org Reported-by: Anders Østhus <grapz666@gmail.com> Reported-by: Andreas Graf <andreas_graf@csgraf.de> Reported-by: Benoit Gschwind <gschwind@gnu-log.net> Reported-by: Damien Cassou <damien.cassou@gmail.com> Reported-by: tixetsal@juno.com Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* | ahci,ata_generic: let ata_generic handle new MBP w/ MCP89Tejun Heo2010-07-012-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For yet unknown reason, MCP89 on MBP 7,1 doesn't work w/ ahci under linux but the controller doesn't require explicit mode setting and works fine with ata_generic. Make ahci ignore the controller on MBP 7,1 and let ata_generic take it for now. Reported in bko#15923. https://bugzilla.kernel.org/show_bug.cgi?id=15923 NVIDIA is investigating why ahci mode doesn't work. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Peer Chen <pchen@nvidia.com> Cc: stable@kernel.org Reported-by: Anders Østhus <grapz666@gmail.com> Reported-by: Andreas Graf <andreas_graf@csgraf.de> Reported-by: Benoit Gschwind <gschwind@gnu-log.net> Reported-by: Damien Cassou <damien.cassou@gmail.com> Reported-by: tixetsal@juno.com Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* | libahci: Fix bug in storing EM messagesHarry Zhang2010-07-011-2/+3
|/ | | | | | | | | In function ahci_store_em_buffer(), if the input (signed char*) buffer contains negative data, the constructed 32-bit long message data may be wrong. Signed-off-by: Harry Zhang <harry.zhang@amd.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_sil24: Use memory barriers before issuing commandsCatalin Marinas2010-06-101-0/+10
| | | | | | | | | | | | The data in the cmd_block buffers may reach the main memory after the writel() to the device ports. This patch introduces two calls to wmb() to ensure the relative ordering. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Colin Tuckley <colin.tuckley@arm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_sil24: memset() overflowDan Carpenter2010-06-101-1/+1
| | | | | | | | | | | | | cb->atapi.cdb is an array of 16 u8 elements. The call too memset() would set the first part of the sge array to zero as well. It's not a packed struct. This one has been around for five years. I found it with Smatch. I think the reason no one has seen it before is because we normally call sil24_fill_sg() and that overwrites sge with proper information? Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* ahci: redo stopping DMA engines on empty portsTejun Heo2010-06-071-18/+3
| | | | | | | | | | | | | | | Commit 96d60303fd (ahci: Turn off DMA engines when there's no device) implemented stopping DMA engines on empty ports but it used single sampling of status registers to determine device presence which led to disabling of DMA engines on occupied ports. Do it after all EH actions are complete using device presence state determined by EH. This avoids spurious disabling of DMA engines and simplifies the code. Signed-off-by: Tejun Heo <tj@kernel.org> Tested-by: Marc Dionne <marc.c.dionne@gmail.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_sil24: fix kernel panic on ARM caused by unaligned access in sata_sil24Colin Tuckley2010-06-071-6/+6
| | | | | | | | | | | | The sata_sil24 driver has six 16-bit registers that are initialised with 32-bit writes. This cause a kernel panic on ARM due to the unaligned accesses which result. This patch changes the accesses to the correct 16-bit ones. Signed-off-by: Colin Tuckley <colin.tuckley@arm.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_via: explain the magic fixTejun Heo2010-06-071-2/+16
| | | | | | | | | Add Joseph Chan's explanation of the problem and workaround to the VT6421 magic fix. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Joseph Chan <JosephChan@via.com.tw> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* Merge branch 'upstream-linus' of ↵Linus Torvalds2010-06-035-8/+48
|\ | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: implement on-demand HPA unlocking libata: use the enlarged capacity after late HPA unlock SCSI: implement sd_unlock_native_capacity() libata-sff: trivial corrections to Kconfig help text sata_nv: don't diddle with nIEN on mcp55 sata_via: magic vt6421 fix for transmission problems w/ WD drives
generated by cgit v1.1 at 2024-12-27 22:03:40 +0000