aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/block
Commit message (Collapse)AuthorAgeFilesLines
* USB: add reset endpoint operationsDavid Vrabel2009-04-171-11/+9
| | | | | | | | | | | | | | | | | | Wireless USB endpoint state has a sequence number and a current window and not just a single toggle bit. So allow HCDs to provide a endpoint_reset method and call this or clear the software toggles as required (after a clear halt, set configuration etc.). usb_settoggle() and friends are then HCD internal and are moved into core/hcd.h and all device drivers call usb_reset_endpoint() instead. If the device endpoint state has been reset (with a clear halt) but the host endpoint state has not then subsequent data transfers will not complete. The device will only work again after it is reset or disconnected. Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* brd: fix cacheflushingNick Piggin2009-04-151-1/+3
| | | | | | | | | | | brd is missing a flush_dcache_page. On 2nd thoughts, perhaps it is the pagecache's responsibility to flush user virtual aliases (the driver of course should flush kernel virtual mappings)... but anyway, there already exists cache flushing for one direction of transfer, so we should add the other. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* brd: support barriersNick Piggin2009-04-151-0/+1
| | | | | | | | | brd is always ordered (not that it matters, as it is defined not to survive when the system goes down). So tell the block layer it is ordered, which might be of help with testing filesystems. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* Replace all DMA_nBIT_MASK macro with DMA_BIT_MASK(n)Yang Hongyang2009-04-131-1/+1
| | | | | | | | | | | | | | | | This is the second go through of the old DMA_nBIT_MASK macro,and there're not so many of them left,so I put them into one patch.I hope this is the last round. After this the definition of the old DMA_nBIT_MASK macro could be removed. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Greg KH <greg@kroah.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* xsysace: Fix dereferencing of cf_id after hd_driveid removalGrant Likely2009-04-081-6/+6
| | | | | | | | | | | | | | | | Commit 4aaf2fec718f6fbf38668edf733a0ab09a49cab1 (xsysace: make it 'struct hd_driveid'-free) converted the cf_id member of 'struct ace_device' from a 'struct hd_driveid' to a u16 array. However, references to the base of the structure were still using the '&' operator. When the address was used with the ata_id_u32() macro, the compiler used the size of the entire array instead of sizeof(u16) to calculate the offset from the base address. This patch removes the use of the '&' operator from all references of cf_id to fix the bug and remove future confusion. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2009-04-077-10/+1162
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git.kernel.dk/linux-2.6-block: loop: mutex already unlocked in loop_clr_fd() cfq-iosched: don't let idling interfere with plugging block: remove unused REQ_UNPLUG cfq-iosched: kill two unused cfqq flags cfq-iosched: change dispatch logic to deal with single requests at the time mflash: initial support cciss: change to discover first memory BAR cciss: kernel scan thread for MSA2012 cciss: fix residual count for block pc requests block: fix inconsistency in I/O stat accounting code block: elevator quiescing helpers
| * loop: mutex already unlocked in loop_clr_fd()Alexander Beregalov2009-04-071-2/+5
| | | | | | | | | | | | | | | | | | | | | | mount/1865 is trying to release lock (&lo->lo_ctl_mutex) at: but there are no more locks to release! mutex is already unlocked in loop_clr_fd(), we should not try to unlock it in lo_release() again. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| * mflash: initial supportunsik Kim2009-04-073-0/+1023
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver supports mflash IO mode for linux. Mflash is embedded flash drive and mainly targeted mobile and consumer electronic devices. Internally, mflash has nand flash and other hardware logics and supports 2 different operation (ATA, IO) modes. ATA mode doesn't need any new driver and currently works well under standard IDE subsystem. Actually it's one chip SSD. IO mode is ATA-like custom mode for the host that doesn't have IDE interface. Followings are brief descriptions about IO mode. A. IO mode based on ATA protocol and uses some custom command. (read confirm, write confirm) B. IO mode uses SRAM bus interface. C. IO mode supports 4kB boot area, so host can boot from mflash. This driver is quitely similar to a standard ATA driver, but because of following reasons it is currently seperated with ATA layer. 1. ATA layer deals standard ATA protocol. ATA layer have many low- level device specific interface, but data transfer keeps ATA rule. But, mflash IO mode doesn't. 2. Even though currently not used in mflash driver code, mflash has some custom command and modes. (nand fusing, firmware patch, etc) If this feature supported in linux kernel, ATA layer more altered. 3. Currently PATA platform device driver doesn't support interrupt. (I'm not sure) But, mflash uses interrupt (polling mode is just for debug). 4. mflash is somewhat under-develop product. Even though some company already using mflash their own product, I think more time is needed for standardization of custom command and mode. That time (maybe October) I will talk to with ATA people. If they accept integration, I will integrate. Signed-off-by: unsik Kim <donari75@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| * cciss: change to discover first memory BARMike Miller2009-04-071-5/+14
| | | | | | | | | | | | | | | | | | | | | | Add a method for discovering the first memory BAR. All Smart Array controllers to date have always had the the memory BAR as the first BAR. A new controller to be released later this year breaks that model. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| * cciss: kernel scan thread for MSA2012Mike Miller2009-04-073-2/+111
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MSA2012 cannot inform the driver of configuration changes since all management is out of band. This is a departure from any storage we have supported in the past. We need some way to detect changes on the topology so we implement this kernel thread. In some instances there's nothing we can do from the driver (like LUN failure) so just print out a message. In the case where logical volumes are added or deleted we call rebuild_lun_table to refresh the driver's view of the world. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| * cciss: fix residual count for block pc requestsJens Axboe2009-04-071-1/+9
| | | | | | | | | | | | | | We must complete the full request, so store the request count and then set the ->data_len to the residual count from the hardware. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* | dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang2009-04-074-7/+7
| | | | | | | | | | | | | | | | Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)Yang Hongyang2009-04-074-6/+6
|/ | | | | | | | Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/linux-hdreg-h-cleanupLinus Torvalds2009-04-033-28/+27
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/bart/linux-hdreg-h-cleanup: remove <linux/ata.h> include from <linux/hdreg.h> include/linux/hdreg.h: remove unused defines isd200: use ATA_* defines instead of *_STAT and *_ERR ones include/linux/hdreg.h: cover WIN_* and friends with #ifndef/#endif __KERNEL__ aoe: WIN_* -> ATA_CMD_* isd200: WIN_* -> ATA_CMD_* include/linux/hdreg.h: cover struct hd_driveid with #ifndef/#endif __KERNEL__ xsysace: make it 'struct hd_driveid'-free ubd_kern: make it 'struct hd_driveid'-free isd200: make it 'struct hd_driveid'-free
| * include/linux/hdreg.h: remove unused definesBartlomiej Zolnierkiewicz2009-04-011-0/+2
| | | | | | | | | | | | | | | | * Move HD_IRQ define to drivers/block/hd.c (only user). * Remove unused *_STAT, *_ERR, HD_*, CD, IO, REL and TAG_MASK defines. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * aoe: WIN_* -> ATA_CMD_*Bartlomiej Zolnierkiewicz2009-04-011-11/+12
| | | | | | | | | | | | | | | | | | * Use ATA_CMD_* defines instead of WIN_* ones. * Include <linux/ata.h> directly instead of through <linux/hdreg.h>. Cc: Ed L. Cashin <ecashin@coraid.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * xsysace: make it 'struct hd_driveid'-freeBartlomiej Zolnierkiewicz2009-04-011-17/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Change cf_id field in struct ace_device from 'struct hd_driveid *id' to 'u16 *id' and update driver accordingly. * Include <linux/ata.h> directly instead of through <linux/hdreg.h>. While at it: * Use ata_id_u32() macro. There should be no functional changes caused by this patch. Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* | nbd: trivial cleanupsPavel Machek2009-04-021-6/+4
| | | | | | | | | | | | | | | | | | | | | | Trivial cleanups for nbd: only the return -EIO one really changes code, and I've verified all the callers (plus 0 == success, 1 == error convention is really ugly). Signed-off-by: Pavel Machek <pavel@suse.cz> Acked-by: Paul Clements <paul.clements@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | nbd: add locking to nbd_ioctlPavel Machek2009-04-021-35/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The code was written to rely on big kernel lock to protect it from races. It mostly works when interface is not abused. So this uses tx_lock to protect data structures from concurrent use between ioctl and worker threads. Next step will be moving from ioctl to unlocked_ioctl. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: add missing return] Signed-off-by: Pavel Machek <pavel@suse.cz> Acked-by: Paul Clements <paul.clements@steeleye.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | floppy: provide a PNP device table in the module.Scott James Remnant2009-04-021-0/+8
|/ | | | | | | | | | | | | | | | | The missing device table means that the floppy module is not auto-loaded, even when the appropriate PNP device (0700) is found. We don't actually use the table in the module, since the device doesn't have a struct pnp_driver, but it's sufficient to cause an alias in the module that udev/modprobe will use. Signed-off-by: Scott James Remnant <scott@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Philippe De Muyter <phdm@macqel.be> Acked-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* loop: add ioctl to resize a loop deviceJ. R. Okajima2009-04-011-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the ability to 'resize' the loop device on the fly. One practical application is a loop file with XFS filesystem, already mounted: You can easily enlarge the file (append some bytes) and then call ioctl(fd, LOOP_SET_CAPACITY, new); The loop driver will learn about the new size and you can use xfs_growfs later on, which will allow you to use full capacity of the loop file without the need to unmount. Test app: #include <linux/fs.h> #include <linux/loop.h> #include <sys/ioctl.h> #include <sys/stat.h> #include <sys/types.h> #include <assert.h> #include <errno.h> #include <fcntl.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #define _GNU_SOURCE #include <getopt.h> char *me; void usage(FILE *f) { fprintf(f, "%s [options] loop_dev [backend_file]\n" "-s, --set new_size_in_bytes\n" "\twhen backend_file is given, " "it will be expanded too while keeping the original contents\n", me); } struct option opts[] = { { .name = "set", .has_arg = 1, .flag = NULL, .val = 's' }, { .name = "help", .has_arg = 0, .flag = NULL, .val = 'h' } }; void err_size(char *name, __u64 old) { fprintf(stderr, "size must be larger than current %s (%llu)\n", name, old); } int main(int argc, char *argv[]) { int fd, err, c, i, bfd; ssize_t ssz; size_t sz; __u64 old, new, append; char a[BUFSIZ]; struct stat st; FILE *out; char *backend, *dev; err = EINVAL; out = stderr; me = argv[0]; new = 0; while ((c = getopt_long(argc, argv, "s:h", opts, &i)) != -1) { switch (c) { case 's': errno = 0; new = strtoull(optarg, NULL, 0); if (errno) { err = errno; perror(argv[i]); goto out; } break; case 'h': err = 0; out = stdout; goto err; default: perror(argv[i]); goto err; } } if (optind < argc) dev = argv[optind++]; else goto err; fd = open(dev, O_RDONLY); if (fd < 0) { err = errno; perror(dev); goto out; } err = ioctl(fd, BLKGETSIZE64, &old); if (err) { err = errno; perror("ioctl BLKGETSIZE64"); goto out; } if (!new) { printf("%llu\n", old); goto out; } if (new < old) { err = EINVAL; err_size(dev, old); goto out; } if (optind < argc) { backend = argv[optind++]; bfd = open(backend, O_WRONLY|O_APPEND); if (bfd < 0) { err = errno; perror(backend); goto out; } err = fstat(bfd, &st); if (err) { err = errno; perror(backend); goto out; } if (new < st.st_size) { err = EINVAL; err_size(backend, st.st_size); goto out; } append = new - st.st_size; sz = sizeof(a); while (append > 0) { if (append < sz) sz = append; ssz = write(bfd, a, sz); if (ssz != sz) { err = errno; perror(backend); goto out; } append -= sz; } err = fsync(bfd); if (err) { err = errno; perror(backend); goto out; } } err = ioctl(fd, LOOP_SET_CAPACITY, new); if (err) { err = errno; perror("ioctl LOOP_SET_CAPACITY"); } goto out; err: usage(out); out: return err; } Signed-off-by: J. R. Okajima <hooanon05@yahoo.co.jp> Signed-off-by: Tomas Matejicek <tomas@slax.org> Cc: <util-linux-ng@vger.kernel.org> Cc: Karel Zak <kzak@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: <linux-api@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* proc 2/2: remove struct proc_dir_entry::ownerAlexey Dobriyan2009-03-311-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Setting ->owner as done currently (pde->owner = THIS_MODULE) is racy as correctly noted at bug #12454. Someone can lookup entry with NULL ->owner, thus not pinning enything, and release it later resulting in module refcount underflow. We can keep ->owner and supply it at registration time like ->proc_fops and ->data. But this leaves ->owner as easy-manipulative field (just one C assignment) and somebody will forget to unpin previous/pin current module when switching ->owner. ->proc_fops is declared as "const" which should give some thoughts. ->read_proc/->write_proc were just fixed to not require ->owner for protection. rmmod'ed directories will be empty and return "." and ".." -- no harm. And directories with tricky enough readdir and lookup shouldn't be modular. We definitely don't want such modular code. Removing ->owner will also make PDE smaller. So, let's nuke it. Kudos to Jeff Layton for reminding about this, let's say, oversight. http://bugzilla.kernel.org/show_bug.cgi?id=12454 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
* Merge branch 'for-linus' of ↵Linus Torvalds2009-03-264-0/+1252
|\ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: irq_node.handler() should return irqreturn_t m68k: section mismatch fixes: Atari SCSI m68k: section mismatch fixes: DMAsound for Atari MAINTAINERS: Replace dead link to m68k CVS repository by link to new git repository m68k: mac - Add SWIM floppy support m68k: mac - Add a new entry in mac_model to identify the floppy controller type. m68k: Add install target
| * m68k: mac - Add SWIM floppy supportLaurent Vivier2009-03-264-0/+1252
| | | | | | | | | | | | | | | | It allows to read data from a floppy, but not to write to, and to eject the floppy (useful on our Mac without eject button). Signed-off-by: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
* | Merge branch 'for-2.6.30' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2009-03-263-4/+52
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-2.6.30' of git://git.kernel.dk/linux-2.6-block: Get rid of pdflush_operation() in emergency sync and remount btrfs: get rid of current_is_pdflush() in btrfs_btree_balance_dirty Move the default_backing_dev_info out of readahead.c and into backing-dev.c block: Repeated lines in switching-sched.txt bsg: Remove bogus check against request_queue->max_sectors block: WARN in __blk_put_request() for potential bio leak loop: fix circular locking in loop_clr_fd() loop: support barrier writes bsg: add support for tail queuing cpqarray: enable bus mastering block: genhd.h cleanup patch block: add private bio_set for bio integrity allocations block: genhd.h comment needs updating block: get rid of unused blkdev_free_rq() define block: remove various blk_queue_*() setting functions in blk_init_queue_node() cciss: add BUILD_BUG_ON() for catching bad CommandList_struct alignment block: don't create bio_vec slabs of less than the inline number block: cleanup bio_alloc_bioset()
| * | loop: fix circular locking in loop_clr_fd()Nikanth Karthikesan2009-03-261-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With CONFIG_PROVE_LOCKING enabled $ losetup /dev/loop0 file $ losetup -o 32256 /dev/loop1 /dev/loop0 $ losetup -d /dev/loop1 $ losetup -d /dev/loop0 triggers a [ INFO: possible circular locking dependency detected ] I think this warning is a false positive. Open/close on a loop device acquires bd_mutex of the device before acquiring lo_ctl_mutex of the same device. For ioctl(LOOP_CLR_FD) after acquiring lo_ctl_mutex, fput on the backing_file might acquire the bd_mutex of a device, if backing file is a device and this is the last reference to the file being dropped . But it is guaranteed that it is impossible to have a circular list of backing devices.(say loop2->loop1->loop0->loop2 is not possible), which guarantees that this can never deadlock. So this warning should be suppressed. It is very difficult to annotate lockdep not to warn here in the correct way. A simple way to silence lockdep could be to mark the lo_ctl_mutex in ioctl to be a sub class, but this might mask some other real bugs. @@ -1164,7 +1164,7 @@ static int lo_ioctl(struct block_device *bdev, fmode_t mode, struct loop_device *lo = bdev->bd_disk->private_data; int err; - mutex_lock(&lo->lo_ctl_mutex); + mutex_lock_nested(&lo->lo_ctl_mutex, 1); switch (cmd) { case LOOP_SET_FD: err = loop_set_fd(lo, mode, bdev, arg); Or actually marking the bd_mutex after lo_ctl_mutex as a sub class could be a better solution. Luckily it is easy to avoid calling fput on backing file with lo_ctl_mutex held, so no lockdep annotation is required. If you do not like the special handling of the lo_ctl_mutex just for the LOOP_CLR_FD ioctl in lo_ioctl(), the mutex handling could be moved inside each of the individual ioctl handlers and I could send you another patch. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| * | loop: support barrier writesNikanth Karthikesan2009-03-241-2/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Honour barrier requests in the loop back block device driver. In case of barrier bios, flush the backing file once before processing the barrier and once after to guarantee ordering. In case of filesystems that does not support fsync, barrier bios would be failed with -EOPNOTSUPP. Signed-off-by: Nikanth Karthikesan <knikanth@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| * | cpqarray: enable bus masteringDave Jones2009-03-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We've been carrying this patch for the last 3 years in Fedora, long past time we got it upstream... Call pci_set_master to enable bus-mastering if the BIOS hasn't done it already. Signed-off-by: Kyle McMartin <kyle@redhat.com> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| * | cciss: add BUILD_BUG_ON() for catching bad CommandList_struct alignmentJens Axboe2009-03-241-0/+7
| |/ | | | | | | | | | | | | | | | | The hardware requires 64-bit alignment of commands, so add a build bug check for that. The recent commit 8a3173de4ab4cdacc43675dc5c077f9a5bf17f5f didn't change the size of the command, but other additions/changes may and thus break badly at runtime. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* | Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller2009-03-268-15/+900
|\ \ | | | | | | | | | | | | Conflicts: drivers/net/wimax/i2400m/usb-notif.c
| * \ Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds2009-03-261-6/+5
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (97 commits) USB: qcserial: add device id for HP devices USB: isp1760: Add a delay before reading the SKIPMAP registers in isp1760-hcd.c USB: allow malformed LANGID descriptors USB: pxa27x_udc: typo fixes and code cleanups USB: gadget: gadget zero uses new suspend/resume hooks USB: gadget: composite device-level suspend/resume hooks USB: r8a66597-hcd: suspend/resume support USB: more u32 conversion after transfer_buffer_length and actual_length USB: Fix cp2101 USB serial device driver termios functions for console use USB: CP2101 New Device ID USB: ipaq: handle 4 endpoint devices USB: S3C: Move usb-control.h to platform include USB: ohci-hcd: Add ARCH_S3C24XX to the ohci-s3c2410.c glue USB: pedantic: spelling correction in comment for ch9.h USB: host: fix sparse warning: Using plain integer as NULL pointer USB: ohci-s3c2410: fix name of bus clock USB: ohci-s3c2410: remove <mach/hardware.h> include USB: serial: rename cp2101 driver to cp210x USB: CP2101 Reduce Error Logging USB: CP2101 Support AN205 baud rates ...
| | * | usb-storage: prepare for subdriver separationAlan Stern2009-03-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1206) is the first step in converting usb-storage's subdrivers into separate modules. It makes the following large-scale changes: Remove a bunch of unnecessary #ifdef's from usb_usual.h. Not truly necessary, but it does clean things up. Move the USB device-ID table (which is duplicated between libusual and usb-storage) into its own source file, usual-tables.c, and arrange for this to be linked with either libusual or usb-storage according to whether USB_LIBUSUAL is configured. Add to usual-tables.c a new usb_usual_ignore_device() function to detect whether a particular device needs to be managed by a subdriver and not by the standard handlers in usb-storage. Export a whole bunch of functions in usb-storage, renaming some of them because their names don't already begin with "usb_stor_". These functions will be needed by the new subdriver modules. Split usb-storage's probe routine into two functions. The subdrivers will call the probe1 routine, then fill in their transport and protocol settings, and then call the probe2 routine. Take the default cases and error checking out of get_transport() and get_protocol(), which run during probe1, and instead put a check for invalid transport or protocol values into the probe2 function. Add a new probe routine to be used for standard devices, i.e., those that don't need a subdriver. This new routine checks whether the device should be ignored (because it should be handled by ub or by a subdriver), and if not, calls the probe1 and probe2 functions. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * | USB: ub: use USB API functions rather than constantsJulia Lawall2009-03-241-5/+4
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This set of patches introduces calls to the following set of functions: usb_endpoint_dir_in(epd) usb_endpoint_dir_out(epd) usb_endpoint_is_bulk_in(epd) usb_endpoint_is_bulk_out(epd) usb_endpoint_is_int_in(epd) usb_endpoint_is_int_out(epd) usb_endpoint_num(epd) usb_endpoint_type(epd) usb_endpoint_xfer_bulk(epd) usb_endpoint_xfer_control(epd) usb_endpoint_xfer_int(epd) usb_endpoint_xfer_isoc(epd) In some cases, introducing one of these functions is not possible, and it just replaces an explicit integer value by one of the following constants: USB_ENDPOINT_XFER_BULK USB_ENDPOINT_XFER_CONTROL USB_ENDPOINT_XFER_INT USB_ENDPOINT_XFER_ISOC An extract of the semantic patch that makes these changes is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r1@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) == - \(USB_ENDPOINT_XFER_CONTROL\|0\)) + usb_endpoint_xfer_control(epd) @r5@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) == - \(USB_DIR_IN\|0x80\)) + usb_endpoint_dir_in(epd) @inc@ @@ #include <linux/usb.h> @depends on !inc && (r1||r5)@ @@ + #include <linux/usb.h> #include <linux/usb/...> // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | platform: make better use of to_platform_{device,driver}() macrosEric Miao2009-03-241-2/+1
| |/ | | | | | | | | | | | | | | | | This helps the code look more consistent and cleaner. Signed-off-by: Eric Miao <eric.miao@marvell.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * Merge commit 'gcl/merge' into mergeBenjamin Herrenschmidt2009-03-181-0/+22
| |\
| | * Fix Xilinx SystemACE driver to handle empty CF slotGrant Likely2009-03-141-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | The SystemACE driver does not handle an empty CF slot gracefully. An empty CF slot ends up hanging the system. This patch adds a check for the CF state and stops trying to process requests if the slot is empty. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| * | ps3/block: Replace mtd/ps3vram by block/ps3vramGeert Uytterhoeven2009-03-132-0/+866
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert the PS3 Video RAM Storage Driver from an MTD driver to a plain block device driver. The ps3vram driver exposes unused video RAM on the PS3 as a block device suitable for storage or swap. Fast data transfer is achieved using a local cache in system RAM and DMA transfers via the GPU. The new driver is ca. 50% faster for reading, and ca. 10% for writing. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2009-03-091-1/+1
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits) p54: fix race condition in memory management cfg80211: test before subtraction on unsigned iwlwifi: fix error flow in iwl*_pci_probe rt2x00 : more devices to rt73usb.c rt2x00 : more devices to rt2500usb.c bonding: Fix device passed into ->ndo_neigh_setup(). vlan: Fix vlan-in-vlan crashes. net: Fix missing dev->neigh_setup in register_netdevice(). tmspci: fix request_irq race pkt_sched: act_police: Fix a rate estimator test. tg3: Fix 5906 link problems SCTP: change sctp_ctl_sock_init() to try IPv4 if IPv6 fails IPv6: add "disable" module parameter support to ipv6.ko sungem: another error printed one too early aoe: error printed 1 too early net pcmcia: worklimit reaches -1 net: more timeouts that reach -1 net: fix tokenring license dm9601: new vendor/product IDs netlink: invert error code in netlink_set_err() ...
| * | loop: don't increment p->offset with (size_t) -EINVALRoel Kluin2009-03-051-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | Upon a 'transfer error block' size is set to -EINVAL, but this becomes positive since size is unsigned: p->offset still gets incremented. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| * | cciss: remove 30 second initial timeout on controller resetJens Axboe2009-03-051-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 5e4c91c84b194b26cf592779e451f4b5be777cba forgot to remove the initial sleep, get rid of it. Thanks to Randy Dunlap <randy.dunlap@oracle.com> for spotting this error. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| * | Fix kernel NULL pointer dereference in xen-blkfrontKris Shannon2009-03-051-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | When booting Xen Dom0 on a pre-release 3.2.1 hypervisor the system Oopses on a "Unable to handle kernel NULL pointer dereference" in xenwatch. From the backtrace it looks like backend_changed is calling bdget_disk with a NULL pointer. Checking for NULL and returning ENODEV instead allows the kernel to boot.
* | | net: convert usage of packet_type to read_mostlyStephen Hemminger2009-03-101-1/+1
| |/ |/| | | | | | | | | | | | | Protocols that use packet_type can be __read_mostly section for better locality. Elminate any unnecessary initializations of NULL. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | aoe: error printed 1 too earlyRoel Kluin2009-03-041-1/+1
|/ | | | | | | | with while (i-- > 0); i reaches -1 after the loop, so the test below is printed one too early: 0 still means success. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* xen/blkfront: use blk_rq_map_sg to generate ring entriesJens Axboe2009-02-261-15/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | On occasion, the request will apparently have more segments than we fit into the ring. Jens says: > The second problem is that the block layer then appears to create one > too many segments, but from the dump it has rq->nr_phys_segments == > BLKIF_MAX_SEGMENTS_PER_REQUEST. I suspect the latter is due to > xen-blkfront not handling the merging on its own. It should check that > the new page doesn't form part of the previous page. The > rq_for_each_segment() iterates all single bits in the request, not dma > segments. The "easiest" way to do this is to call blk_rq_map_sg() and > then iterate the mapped sg list. That will give you what you are > looking for. > Here's a test patch, compiles but otherwise untested. I spent more > time figuring out how to enable XEN than to code it up, so YMMV! > Probably the sg list wants to be put inside the ring and only > initialized on allocation, then you can get rid of the sg on stack and > sg_init_table() loop call in the function. I'll leave that, and the > testing, to you. [Moved sg array into info structure, and initialize once. -J] Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
* cciss: shorten 30s timeout on controller resetJens Axboe2009-02-261-3/+7
| | | | | | | | | | If reset_devices is set for kexec, then cciss will delay 30 seconds since the old 5i controller _may_ need that long to recover. Replace the long sleep with incremental sleep and tests to reduce the 30 seconds to worst case for 5i, so that other controllers will proceed quickly. Reviewed-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* m68k: atari - Rename "mfp" to "st_mfp"Geert Uytterhoeven2009-02-221-2/+2
| | | | | | | | | | | | | | | | | | | | http://kisskb.ellerman.id.au/kisskb/buildresult/72115/: | net/mac80211/ieee80211_i.h:327: error: syntax error before 'volatile' | net/mac80211/ieee80211_i.h:350: error: syntax error before '}' token | net/mac80211/ieee80211_i.h:455: error: field 'sta' has incomplete type | distcc[19430] ERROR: compile net/mac80211/main.c on sprygo/32 failed This is caused by | # define mfp ((*(volatile struct MFP*)MFP_BAS)) in arch/m68k/include/asm/atarihw.h, which conflicts with the new "mfp" enum in net/mac80211/ieee80211_i.h. Rename "mfp" to "st_mfp", as it's a way too generic name for a global #define. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2009-02-182-1/+216
|\ | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: fix deadlock in blk_abort_queue() for drivers that readd to timeout list block: fix booting from partitioned md array block: revert part of 18ce3751ccd488c78d3827e9f6bf54e6322676fb cciss: PCI power management reset for kexec paride/pg.c: xs(): &&/|| confusion fs/bio: bio_alloc_bioset: pass right object ptr to mempool_free block: fix bad definition of BIO_RW_SYNC bsg: Fix sense buffer bug in SG_IO
| * cciss: PCI power management reset for kexecChip Coldwell2009-02-181-0/+215
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kexec kernel resets the CCISS hardware in three steps: 1. Use PCI power management states to reset the controller in the kexec kernel. 2. Clear the MSI/MSI-X bits in PCI configuration space so that MSI initialization in the kexec kernel doesn't fail. 3. Use the CCISS "No-op" message to determine when the controller firmware has recovered from the PCI PM reset. [akpm@linux-foundation.org: cleanups] Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| * paride/pg.c: xs(): &&/|| confusionRoel Kluin2009-02-181-1/+1
| | | | | | | | | | | | | | | | | | &&/|| confusion Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* | floppy: request and release only the ports we actually usePhilippe De Muyter2009-02-181-27/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The floppy driver requests an I/O port it doesn't need, and sometimes this causes a conflict with a motherboard device reported by PNPBIOS. This patch makes the floppy driver request and release only the ports it actually uses. It also factors out the request/release stuff and the io-ports list so they're all in one place now. The current floppy driver uses only these ports: 0x3f2 (FD_DOR) 0x3f4 (FD_STATUS) 0x3f5 (FD_DATA) 0x3f7 (FD_DCR/FD_DIR) but it requests 0x3f2-0x3f5 and 0x3f7, which includes the unused port 0x3f3. Some BIOSes report 0x3f3 as a motherboard resource. The PNP system driver reserves that, which causes a conflict when the floppy driver requests 0x3f2-0x3f5 later. Philippe reported that this conflict broke the floppy driver between 2.6.11 and 2.6.22. His PNPBIOS reports these devices: $ cat 00:07/id 00:07/resources # motherboard device PNP0c02 state = active io 0x80-0x80 io 0x10-0x1f io 0x22-0x3f io 0x44-0x5f io 0x90-0x9f io 0xa2-0xbf io 0x3f0-0x3f1 io 0x3f3-0x3f3 $ cat 00:03/id 00:03/resources # floppy device PNP0700 state = active io 0x3f4-0x3f5 io 0x3f2-0x3f2 Reference: http://lkml.org/lkml/2009/1/31/162 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Philippe De Muyter <phdm@macqel.be> Reported-by: Philippe De Muyter <phdm@macqel.be> Tested-by: Philippe De Muyter <phdm@macqel.be> Cc: Adam M Belay <abelay@mit.edu> Cc: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.1 at 2024-12-27 21:22:17 +0000