aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mmc
Commit message (Collapse)AuthorAgeFilesLines
* drivers/mmc/host/sdhci-s3c.c: use the correct mutex and card detect functionKyungmin Park2010-08-201-3/+3
| | | | | | | | | | | There's some merge problem between sdhic core and sdhci-s3c host. After mutex is changed to spinlock. It needs to use use spin lock functions and use the correct card detection function. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* sdhci: add no hi-speed bit quirk supportKyungmin Park2010-08-202-1/+4
| | | | | | | | | | Some SDHCI controllers like s5pc110 don't have an HISPD bit in the HOSTCTL register. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* s5pc110: SDHCI-s3c support on s5pc110Kyungmin Park2010-08-201-1/+1
| | | | | | | | | s5pc110 (aka s5pv210) uses the same SDHCI IP. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mmc: build fix: mmc_pm_notify is only available with CONFIG_PM=yUwe Kleine-König2010-08-181-0/+2
| | | | | | | | | | | | | | | This fixes a build breakage introduced by commit 4c2ef25fe0b8 ("mmc: fix all hangs related to mmc/sd card insert/removal during suspend/resume") Cc: David Brownell <david-b@pacbell.net> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: linux-mmc@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Maxim Levitsky <maximlevitsky@gmail.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2010-08-141-48/+11
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'next-spi' of git://git.secretlab.ca/git/linux-2.6: spi/amba_pl022: Fix probe and remove hook section annotations. spi/mpc5121: change annotations for probe and remove functions spi/bitbang: reinitialize transfer parameters for every message spi/spi-gpio: add support for controllers without MISO or MOSI pin spi/bitbang: add support for SPI_MASTER_NO_{TX, RX} modes SPI100k: Fix 8-bit and RX-only transfers spi/mmc_spi: mmc_spi adaptations for SPI bus locking API spi/mmc_spi: SPI bus locking API, using mutex Fix trivial conflict in drivers/spi/mpc512x_psc_spi.c due to 'struct of_device' => 'struct platform_device' rename and __init/__exit to __devinit/__devexit fix.
| * Merge commit 'v2.6.35-rc6' into spi/testGrant Likely2010-07-251-0/+20
| |\
| * | spi/mmc_spi: mmc_spi adaptations for SPI bus locking APIErnst Schwab2010-07-031-48/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modification of the mmc_spi driver to use the SPI bus locking API. With this, the mmc_spi driver can be used together with other SPI devices on the same SPI bus. The exclusive access to the SPI bus is now managed in the SPI layer. The counting of chip selects in the probe function is no longer needed. Signed-off-by: Ernst Schwab <eschwab@online.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
* | | Merge branch 'msm-mmc_sdcc' of ↵Linus Torvalds2010-08-133-17/+29
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://codeaurora.org/quic/kernel/dwalker/linux-msm * 'msm-mmc_sdcc' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: mmc: msm_sdcc: Rename config MMC_MSM7X00A to MMC_MSM mmc: msm_sdcc: Compile the driver for msm7x30 mmc: msm: fix up build breakage on !PM
| * | | mmc: msm_sdcc: Rename config MMC_MSM7X00A to MMC_MSMSahitya Tummala2010-08-092-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SD/MMC host controller driver is same for all MSM and QSD platforms. Hence, rename the config to reflect the same. Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
| * | | mmc: msm_sdcc: Compile the driver for msm7x30Sahitya Tummala2010-08-092-13/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The controller base address is referred from platform resource instead of using #defines. This fixes the compilation error when driver is compiled for msm7x30. Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
| * | | mmc: msm: fix up build breakage on !PMDaniel Walker2010-06-231-16/+22
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | with PM disabled I get the following compile error, drivers/built-in.o: In function `msmsdcc_resume': linux-2.6/drivers/mmc/host/msm_sdcc.c:1352: undefined reference to `mmc_resume_host' drivers/built-in.o: In function `msmsdcc_suspend': linux-2.6/drivers/mmc/host/msm_sdcc.c:1330: undefined reference to `mmc_suspend_host' This adds ifdefs around the suspend/resume functions to prevent this. Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
* | | Merge branch 'msm-core' of git://codeaurora.org/quic/kernel/dwalker/linux-msmLinus Torvalds2010-08-122-2/+2
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'msm-core' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: msm: mmc: Add msm prefix to platform data structure msm: trout: Remove extern declaration from source file arm: msm: Fix section mismatch in smd.c. arm: msm: trout add mmc support arm: msm: trout: add trout specific gpio interrupts arm: msm: remove unused #include <linux/version.h>
| * | | msm: mmc: Add msm prefix to platform data structureSahitya Tummala2010-08-092-2/+2
| |/ / | | | | | | | | | | | | | | | | | | | | | Rename mmc_platform_data to msm_mmc_platform_data as it is used only by MSM platform. Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
* | | Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2010-08-122-4/+5
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | * 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: mmc_spi: Fix unterminated of_match_table of/sparc: fix build regression from of_device changes of/device: Replace struct of_device with struct platform_device
| * | | mmc_spi: Fix unterminated of_match_tableAnton Vorontsov2010-08-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 2ffe8c5f323c3b9749bf7bc2375d909d20bdbb15 ("of: refactor of_modalias_node() and remove explicit match table"), introduced an unterminated of_match_table, which may cause kernel to oops. This patch fixes the issue by adding an empty device ID. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * | | of/device: Replace struct of_device with struct platform_deviceGrant Likely2010-08-061-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | of_device is just an alias for platform_device, so remove it entirely. Also replace to_of_device() with to_platform_device() and update comment blocks. This patch was initially generated from the following semantic patch, and then edited by hand to pick up the bits that coccinelle didn't catch. @@ @@ -struct of_device +struct platform_device Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: David S. Miller <davem@davemloft.net>
* | | | mmc_test: fix large memory allocationAdrian Hunter2010-08-121-29/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Fix mmc_test_alloc_mem. - Use nr_free_buffer_pages() instead of sysinfo.totalram to determine total lowmem pages. - Change variables containing memory sizes to unsigned long. - Limit maximum test area size to 128MiB because that is the maximum MMC high capacity erase size (the maxmium SD allocation unit size is just 4MiB) Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | mmc_test: add performance testsAdrian Hunter2010-08-121-2/+791
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mmc_test provides tests aimed at testing SD/MMC hosts. This patch adds performance tests. It is advantageous to have performance tests in a kernel module like mmc_test for the following reasons: - transfer times can be measured very accurately - arbitrarily large transfers are possible - the effect of contiguous vs scattered pages can be determined The new tests are: 23. Best-case read performance 24. Best-case write performance 25. Best-case read performance into scattered pages 26. Best-case write performance from scattered pages 27. Single read performance by transfer size 28. Single write performance by transfer size 29. Single trim performance by transfer size 30. Consecutive read performance by transfer size 31. Consecutive write performance by transfer size 32. Consecutive trim performance by transfer size Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | mmc_block: add support for secure discardAdrian Hunter2010-08-122-3/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Secure discard is implemented by Secure Trim if the discard is unaligned or Secure Erase otherwise. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ben Gardiner <bengardiner@nanometrics.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | omap_hsmmc: add erase capabilityAdrian Hunter2010-08-121-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Disable the data (busy) timeout for erases and set the MMC_CAP_ERASE capability. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ben Gardiner <bengardiner@nanometrics.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | mmc_block: add discard supportAdrian Hunter2010-08-122-3/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable MMC to service discard requests. In the case of SD and MMC cards that do not support trim, discards become erases. In the case of cards (MMC) that only allow erases in multiples of erase group size, round to the nearest completely discarded erase group. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ben Gardiner <bengardiner@nanometrics.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | mmc: add erase, secure erase, trim and secure trim operationsAdrian Hunter2010-08-126-1/+525
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SD/MMC cards tend to support an erase operation. In addition, eMMC v4.4 cards can support secure erase, trim and secure trim operations that are all variants of the basic erase command. SD/MMC device attributes "erase_size" and "preferred_erase_size" have been added. "erase_size" is the minimum size, in bytes, of an erase operation. For MMC, "erase_size" is the erase group size reported by the card. Note that "erase_size" does not apply to trim or secure trim operations where the minimum size is always one 512 byte sector. For SD, "erase_size" is 512 if the card is block-addressed, 0 otherwise. SD/MMC cards can erase an arbitrarily large area up to and including the whole card. When erasing a large area it may be desirable to do it in smaller chunks for three reasons: 1. A single erase command will make all other I/O on the card wait. This is not a problem if the whole card is being erased, but erasing one partition will make I/O for another partition on the same card wait for the duration of the erase - which could be a several minutes. 2. To be able to inform the user of erase progress. 3. The erase timeout becomes too large to be very useful. Because the erase timeout contains a margin which is multiplied by the size of the erase area, the value can end up being several minutes for large areas. "erase_size" is not the most efficient unit to erase (especially for SD where it is just one sector), hence "preferred_erase_size" provides a good chunk size for erasing large areas. For MMC, "preferred_erase_size" is the high-capacity erase size if a card specifies one, otherwise it is based on the capacity of the card. For SD, "preferred_erase_size" is the allocation unit size specified by the card. "preferred_erase_size" is in bytes. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ben Gardiner <bengardiner@nanometrics.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | mmc: add ricoh e822 pci idPablo Castillo2010-08-111-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Pablo Castillo <CyberCastle@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Tested-by: Gregg Lebovitz <gregg@lebovitz.net> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | sdhci: add auto CMD12 support for eSDHC driverJerry Huang2010-08-113-2/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add auto CMD12 command support for eSDHC driver. This is needed by P4080 and P1022 for block read/write. Manual asynchronous CMD12 abort operation causes protocol violations on these silicons. Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | sdhci: add regulator supportMarek Szyprowski2010-08-112-1/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for regulator API to sdhci core driver. Regulators can be used to disable power in suspended state to reduce dissipated energy. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | sdhci-s3c: add support for new card detection methodsMarek Szyprowski2010-08-112-0/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some Samsung SoCs not all SDHCI controllers have card detect (CD) line. For some embedded designs it is not even needed, because ususally the device (like SDIO flash memory or wifi controller) is permanently wired to the controller. There are also systems which have a card detect line connected to some of the external interrupt lines or the presence of the card depends on some other actions (like enabling a power regulator). This patch adds support for all these cases. The following card detection methods are possible: 1. internal sdhci host card detect line 2. external event 3. external gpio interrupt 4. no card detect line, controller will poll for the card 5. no card detect line, card is permanently wired to the controller (once detected host won't poll it any more) By default, all existing code would use method #1, what is compatible with the previous version of the driver. In case of external event, two callbacks must be provided in platdata: ext_cd_init and ext_cd_cleanup. Both of them get a callback to a function that notifies the s3c-sdhci host contoller as their argument. That callback function should be called from the even dispatcher to let host notice the card insertion/removal. In case of external gpio interrupt, a gpio pin number must be provided in platdata (ext_cd_gpio parameter), as well as the information about the polarity of that gpio pin (ext_cd_gpio_invert). By default (ext_cd_gpio_invert == 0) gpio value 0 means 'card has been removed', but this can be changed to 'card has been removed' when ext_cd_gpio_invert == 1. This patch adds all required changes to sdhci-s3c driver. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | sdhci-s3c: enable SDHCI_QUIRK_NO_HISPD_BIT quirkMarek Szyprowski2010-08-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables SDHCI_QUIRK_NO_HISPD_BIT on Samsung SDHCI driver. This solves detection problems with some external SD cards. This change has been tested on S5PC100 and S5PC110. It has no inpact on driver speed. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | sdhci-s3c: add support for the non standard minimal clock valueMarek Szyprowski2010-08-112-2/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | S3C SDHCI host controller can change the source for generating mmc clock. By default host bus clock is used, what causes some problems on machines with 133MHz bus, because the SDHCI divider cannot be as high get proper clock value for identification mode. This is not a problem for the controller, because it can generate lower frequencies from other clock sources. This patch changes sdhci driver to use get_min_clock() call if it has been provided. This fixes the flood of the following warnings on Samsung S5PV210 SoCs: mmc0: Minimum clock frequency too high for identification mode Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | sdhci-s3c: add SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK quirkHyuk Lee2010-08-111-7/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Samsung's SDMMC hosts the timeout clock is derivied from the SD Clock which is set dynamically. So checked SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK quirk and removed 'sdhci_s3c_get_timeout_clk' callback which doesn't need any more. Signed-off-by: Hyuk Lee <hyuk1.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | omap hsmmc: fix processing of all dma interrupts as block completionVenkatraman S2010-08-111-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If other informative interrupts are enabled for the DMA channel used by hsmmc, those are incorrectly treated as block completion. This patch lets only the block completion interrupt to be processed. Signed-off-by: Venkatraman S <svenkatr@ti.com> Acked-by: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | drivers/mmc/host/msm-sdcc: remove dead config optionsChristian Dietrich2010-08-112-29/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_MMC_MSM7X00A_RESUME_IN_WQ and CONFIG_MMC_EMBEDDED_SDIO don't exist in Kconfig and is never defined anywhere else, therefore removing all references for it from the source code. Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de> Acked-by: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@codeaurora.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | omap_hsmmc: add init_card pass-through callbackGrazvydas Ignotas2010-08-111-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This will allow us to set up special cards in machine drivers just after they are detected by MMC core. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Bob Copeland <me@bobcopeland.com> Cc: Kalle Valo <kvalo@adurom.com> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Kishore Kadiyala <kishore.kadiyala@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | sdio: allow non-standard SDIO cardsGrazvydas Ignotas2010-08-111-6/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are some chips (like TI WL12xx series) that can be interfaced over SDIO but don't support the SDIO specification, meaning that they are missing CIA (Common I/O Area) with all it's registers. Current Linux SDIO implementation relies on those registers to identify and configure the card, so non-standard cards can not function and cause lots of warnings from the core when it reads invalid data from non-existent registers. After this patch, init_card() host callback can now set new quirk MMC_QUIRK_NONSTD_SDIO, which means that SDIO core should not try to access any standard SDIO registers and rely on init_card() to fill all SDIO structures instead. As those cards are usually embedded chips, all the required information can be obtained from machine board files by the host driver when it's called through init_card() callback. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Bob Copeland <me@bobcopeland.com> Cc: Kalle Valo <kvalo@adurom.com> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Kishore Kadiyala <kishore.kadiyala@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | sdhci-pltfm: add support for CNS3xxx SoC devicesAnton Vorontsov2010-08-115-0/+114
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's nothing special, just SoC-specific ops and quirks. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Cc: Ben Dooks <ben@simtec.co.uk> Cc: Richard R?jfors <richard.rojfors@pelagicore.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | sdhci-pltfm: reorganize Makefile entries to support SoC devicesAnton Vorontsov2010-08-111-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to build system limitations, intermediate and final objects can't have the same names. And as we're going to start building SoC-specific objects, let's rename the module to sdhci-platform, into which we'll link sdhci-pltfm and SoC-specifc objects. There should be no issue in renaming as the driver uses modalias mechanism. This is exactly the same approach as in sdhci-of driver. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Cc: Ben Dooks <ben@simtec.co.uk> Cc: Richard R?jfors <richard.rojfors@pelagicore.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | sdhci-pltfm: switch to module device table matchingAnton Vorontsov2010-08-112-1/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sometimes want to place SoC-specific parts alongside with the generic driver, and to do so, we have to switch the driver over to the module device table matching. Note that drivers/mmc/host/sdhci-pltfm.h is so far empty, but it'll hold SoC-specific driver data handlers soon. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Cc: Ben Dooks <ben@simtec.co.uk> Cc: Richard R?jfors <richard.rojfors@pelagicore.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | mmc: omap: fix for bus width which improves SD card's peformance.Kishore Kadiyala2010-08-111-2/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch improves low speeds for SD cards. OMAP-MMC controller's can support maximum bus width of '8'. when bus width is mentioned as "8" in controller data,the SD stack will check whether bus width is "4" and if not it will set bus width to "1" and there by degrading performance. This patch fixes the issue and improves the performance of SD cards. Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Madhusudhan Chikkature <madhu.cr@ti.com> Tested-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Matt Fleming <matt@console-pimps.org> Cc: Tony Lindgren <tony@atomide.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | mmc: only set blockaddressed for > 2GiB cardsHanumath Prasad2010-08-111-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A non-zero value of SEC_COUNT does not indicate that the card is sector addressed. According to the MMC specification, cards with a density greater than 2GiB are sector addressed. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Hanumath Prasad <hanumath.prasad@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | sdhci: don't assign mmc->caps at SDHCI directlyKyungmin Park2010-08-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some host controllers can set mmc->caps before sdhci_add_host(). Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | sdhci: 8-bit data transfer width supportKyungmin Park2010-08-112-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some host controllers such as s5pc110 support the WIDE8 feature. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | sdhci: remove useless set_clock() checkKyungmin Park2010-08-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When using QUIRK_NONSTANDARD_CLOCK, it checks the set_clock() function which is not used actually. So delete it. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | mmc: make sdhci work with ricoh mmc controllerMaxim Levitsky2010-08-113-1/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current way of disabling it is not well tested by vendor and has all kinds of bugs that show up on resume from ram/disk. A very good example is a dead SDHCI controller. Old way of disabling is still supported by continuing to use CONFIG_MMC_RICOH_MMC. Based on 'http://list.drzeus.cx/pipermail/sdhci-devel/2007-December/002085.html' Therefore most of the credit for this goes to Andrew de Quincey Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Philip Langdale <philipl@overt.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | mmc: fix all hangs related to mmc/sd card insert/removal during suspend/resumeMaxim Levitsky2010-08-112-26/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If you don't use CONFIG_MMC_UNSAFE_RESUME, as soon as you attempt to suspend, the card will be removed, therefore this patch doesn't change the behavior of this option. However the removal will be done by pm notifier, which runs while userspace is still not frozen and thus can freely use del_gendisk, without the risk of deadlock which would happen otherwise. Card detect workqueue is now disabled while userspace is frozen, Therefore if you do use CONFIG_MMC_UNSAFE_RESUME, and remove the card during suspend, the removal will be detected as soon as userspace is unfrozen, again at the moment it is safe to call del_gendisk. Tested with and without CONFIG_MMC_UNSAFE_RESUME with suspend and hibernate. [akpm@linux-foundation.org: clean up function prototype] [akpm@linux-foundation.org: fix CONFIG_PM-n linkage, small cleanups] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Cc: David Brownell <david-b@pacbell.net> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | mmc: implement SD-combo (IO+mem) supportMichal Miroslaw2010-08-113-23/+133
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Michal Miroslaw <mirq-linux@rere.qmqm.pl> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Chris Ball <cjb@laptop.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | mmc: split mmc_sd_init_card()Michal Miroslaw2010-08-113-119/+186
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This series adds support for SD combo cards to MMC/SD driver stack. SD combo consists of SD memory and SDIO parts in one package. Since the parts have a separate SD command sets, after initialization, they can be treated as independent cards on one bus. Changes are divided into two patches. First is just moving initialization code around so that SD memory part init can be called from SDIO init. Second patch is a proper change enabling SD memory along SDIO. I tried to move as much no-op changes to the first patch so that it's easier to follow the required changes to initialization flow for SDIO cards. This is based on Simplified SDIO spec v.2.00. The init sequence is slightly modified to follow current SD memory init implementation. Command sequences, assuming SD memory and SDIO indeed ignore unknown commands, are the same as before for both parts. This patch: Prepare for SD-combo (IO+mem) support by splitting SD memory card init and related functions. Signed-off-by: Michal Miroslaw <mirq-linux@rere.qmqm.pl> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Chris Ball <cjb@laptop.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | mmc: recognize CSD structureKyungmin Park2010-08-111-7/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The eMMC spec 4.4 and 4.3 + additional feature chips has CSD structure version 3 and version 3 have to check the CSD_STRUCTURE byte in the EXT_CSD register. Also fix EXT_CSD revision message. [akpm@linux-foundation.org: fix comment, per Chris Ball] Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Chris Ball <cjb@laptop.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | Merge branch 'for-2.6.36' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2010-08-102-2/+7
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits) block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n xen-blkfront: fix missing out label blkdev: fix blkdev_issue_zeroout return value block: update request stacking methods to support discards block: fix missing export of blk_types.h writeback: fix bad _bh spinlock nesting drbd: revert "delay probes", feature is being re-implemented differently drbd: Initialize all members of sync_conf to their defaults [Bugz 315] drbd: Disable delay probes for the upcomming release writeback: cleanup bdi_register writeback: add new tracepoints writeback: remove unnecessary init_timer call writeback: optimize periodic bdi thread wakeups writeback: prevent unnecessary bdi threads wakeups writeback: move bdi threads exiting logic to the forker thread writeback: restructure bdi forker loop a little writeback: move last_active to bdi writeback: do not remove bdi from bdi_list writeback: simplify bdi code a little writeback: do not lose wake-ups in bdi threads ... Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and drivers/scsi/scsi_error.c as per Jens.
| * | | | block: push down BKL into .open and .releaseArnd Bergmann2010-08-071-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The open and release block_device_operations are currently called with the BKL held. In order to change that, we must first make sure that all drivers that currently rely on this have no regressions. This blindly pushes the BKL into all .open and .release operations for all block drivers to prepare for the next step. The drivers can subsequently replace the BKL with their own locks or remove it completely when it can be shown that it is not needed. The functions blkdev_get and blkdev_put are the only remaining users of the big kernel lock in the block layer, besides a few uses in the ioctl code, none of which need to serialize with blkdev_{get,put}. Most of these two functions is also under the protection of bdev->bd_mutex, including the actual calls to ->open and ->release, and the common code does not access any global data structures that need the BKL. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
| * | | | block: remove q->prepare_flush_fn completelyFUJITA Tomonori2010-08-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This removes q->prepare_flush_fn completely (changes the blk_queue_ordered API). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
| * | | | block: remove wrappers for request type/flagsChristoph Hellwig2010-08-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove all the trivial wrappers for the cmd_type and cmd_flags fields in struct requests. This allows much easier grepping for different request types instead of unwinding through macros. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
generated by cgit v1.1 at 2024-12-28 10:47:24 +0000