aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel
Commit message (Collapse)AuthorAgeFilesLines
...
* ixgbe: Use watchdog check in favor of BPF for detecting latched timestampJacob Keller2013-01-233-87/+51
| | | | | | | | | | | | | | | | | | | | | | | This patch removes ixgbe_ptp_match, and the corresponding packet filtering from ixgbe driver. This code was previously causing some issues within the hotpath of the driver. However the code also provided a check against possible frozen Rx timestamp due to dropped packets when the Rx ring is full. This patch provides a replacement solution based on the watchdog. To this end, whenever a packet consumes the Rx timestamp it stores the jiffy value in the rx_ring structure. Watchdog updates its own jiffy timer whenever there is no valid timestamp in the registers. If watchdog detects a valid timestamp in the registers, (meaning that no Rx packet has consumed it yet) it will check which time is most recent, the last time in the watchdog, or any time in the rx_rings. If the most recent "event" was more than 5seconds ago, it will flush the Rx timestamp and print a warning message to the syslog. Reported-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Update ptp_overflow check comment and jiffiesJacob Keller2013-01-231-7/+7
| | | | | | | | | | This patch fixes the comment on ptp_overflow_check to match up with what is currently used as the parameters. Also change the jiffies check to use time_is_after_jiffies macro. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: add missing supported filters to get_ts_infoJacob Keller2013-01-231-0/+8
| | | | | | | | | | | | | | This patch updates the filters for ethtool's get_ts_info to return support for all filters which can be supported by upscaling to ptp_v2_event. The intent behind this change is due to reasoning that we do in fact support the filters. (hwtstamp_ioctl returns success after setting the filter to the upscaled version). In this way we can remain consistent over which filters are supported via the get_ts_info ioctl and which filters are in practice actually supported. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: ethtool ixgbe_diag_test cleanupJacob Keller2013-01-231-12/+26
| | | | | | | | | | | | | | | | This patch cleans up the ethtool diagnostics test by ensuring that the tests work properly regardless of what state the adapter was in. The SRIOV VF check is done at the beginning, forgoing the link test. The if_running -> dev_close is moved before the link test, as well as a call to enable the Tx laser. This ensures that the link test will return valid results even when adapter was previously down. Also, a call to disable the Tx laser is added if the device was down before the start. This ensures consistent behavior of the Tx laser before and after the diagnostic checks. The end result is consistent behavior regardless of device state. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* igb: Copyright string update to year 2013Akeem G. Abodunrin2013-01-1920-21/+22
| | | | | | | | | | This patch updates Copyright year to 2013 v2: Changed Copyright year on Makefile Signed-off-by: Akeem G. Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* igb: Replace rmb in Tx cleanup with read_barrier_dependsAlexander Duyck2013-01-191-1/+1
| | | | | | | | | | The rmb in the Tx cleanup path is a much stronger barrier than we really need. All that is really needed is a read_barrier_depends since the location of the EOP descriptor is dependent on the eop_desc value. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbevf: Fix statistics corruptionGreg Rose2013-01-191-1/+6
| | | | | | | | | | | | | | When the physical function (PF) is reset for any reason the statistics collection in ixgbevf_update_stats needs to wait to update until after the reset synchronization ensures that the PF driver is up and running and is finished with its own reset. Go ahead and clear the link flag to indicate this when the control message from the PF is received. The reset synchronization and recovery in the watchdog task will eventually set the link flag up when the PF has resumed. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbevf: Fix link up messagesGreg Rose2013-01-191-4/+5
| | | | | | | | Use dev_info to log link up/down messages. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbevf: Synch out of tree and in tree mailbox interrupt handlersGreg Rose2013-01-191-2/+25
| | | | | | | | | | | The out of tree driver and the in kernel driver should use the same interrupt handling logic for mailbox interrupts. The difference in the handlers was causing dissimilar behavior between the two drivers complicating debug and trouble shooting. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Improve performance and reduce size of ixgbe_tx_mapAlexander Duyck2013-01-191-23/+19
| | | | | | | | | | | | | This change is meant to both improve the performance and reduce the size of ixgbe_tx_map. To do this I have expanded the work done in the main loop by pushing first into tx_buffer. This allows us to pull in the dma_mapping_error check, the tx_buffer value assignment, and the initial DMA value assignment to the Tx descriptor. The net result is that the function reduces in size by a little over a 100 bytes and is about 1% or 2% faster. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Update ixgbe Tx flags to improve code efficiencyAlexander Duyck2013-01-193-53/+57
| | | | | | | | | | | | | | | | | | | | | | | This change is meant to improve the efficiency of the Tx flags in ixgbe by aligning them with the values that will later be written into either the cmd_type or olinfo. By doing this we are able to reduce most of these functions to either just a simple shift followed by an or in the case of cmd_type, or an and followed by an or in the case of olinfo. To do this I also needed to change the logic and/or drop some flags. I dropped the IXGBE_TX_FLAGS_FSO and it was replaced by IXGBE_TX_FLAGS_TSO since the only place it was ever checked was in conjunction with IXGBE_TX_FLAGS_TSO. I replaced IXGBE_TX_FLAGS_TXSW with IXGBE_TX_FLAGS_CC, this way we have a clear point for what the flag is meant to do. Finally the IXGBE_TX_FLAGS_NO_IFCS was dropped since were are already carrying the data for that flag in the skb. Instead we can just check the bitflag in the skb. In order to avoid type conversion errors I also adjusted the locations where we were switching between CPU and little endian. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Always use context 0, even for FCoE and TSOAlexander Duyck2013-01-192-12/+2
| | | | | | | | | | We were spending cycles separating the FCoE and TSO contexts even though we always overwriting the context anyway. Instead of doing that we can just use context 0 for all descriptors. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Make TSO check for CHECKSUM_PARTIAL to avoid skb_is_gso checkAlexander Duyck2013-01-191-0/+3
| | | | | | | | | | | This change is meant to reduce the overhead for workloads that are not using either TSO or checksum offloads. Most of the time the compiler should jump ahead after failing this check to the VLAN check since in the ixgbe_tx_csum call we start with that check as well. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: SR-IOV: dynamic IEEE DCBx default priority changesJohn Fastabend2013-01-193-10/+47
| | | | | | | | | | | | | | | IEEE DCBx has a mechanism to change the default user priority. In the normal case the OS can handle this via cgroups, iptables, socket, options etc. With SR-IOV and direct assigned VF devices the default priority needs to be set by the PF device so the inserted VLAN tag is correct. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* igb: Use in-kernel PTP_EV_PORT #defineMatthew Vick2013-01-181-3/+3
| | | | | | | | | | | Rather than use an extra #define for something that already exists, use the kernel #define for the PTP port. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Acked-by: Jacob Keller <Jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* igb: Free any held skb that should have been timestamped on removeMatthew Vick2013-01-181-0/+4
| | | | | | | | | | | | To prevent a race condition where an skb has been saved to return the Tx timestamp later and the driver is removed, add a check to determine if we have an skb stored and, if so, free it. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Acked-by: Jacob Keller <Jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* igb: Add mechanism for detecting latched hardware Rx timestampMatthew Vick2013-01-184-0/+51
| | | | | | | | | | | | | | | | | | | | | | | | Add a check against possible Rx timestamp freezing in the hardware via watchdog mechanism. This situation can occur when an Rx timestamp has been latched, but the packet has been dropped because the Rx ring is full. Whenever a packet comes in that should be timestamped, the Rx timestamp gets latched into the hardware registers and we will store the jiffy value in the rx_ring. The watchdog will keep track of his own jiffy timer whenever there is no valid timestamp in the registers. If the watchdog detects a valid timestamp in the registers, meaning that no Rx packet has consumed it yet, it will check which time is most recent: the last time in the watchdog or any time in the rx_rings. If the most recent "event" was more than 5 seconds ago, it will flush the Rx timestamp and print a warning message to the syslog. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jacob Keller <Jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* igb: Add timeout for PTP Tx work itemMatthew Vick2013-01-184-0/+14
| | | | | | | | | | | | | | When transmitting a packet that must return a Tx timestamp, a work item gets scheduled to poll for the Tx timestamp being completed in hardware. Add a timeout on this work item of 15 seconds from when the driver gets the skb, after which it will stop polling. Report via stats and system log if this occurs. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Acked-by: Jacob Keller <Jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* igb: Add support for SW timestampingMatthew Vick2013-01-182-0/+11
| | | | | | | | | | | Enable SW timestamping for situations where the user may prefer it over HW timestamping or there may not be HW timestamping. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Acked-by: Jacob Keller <Jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* igb: Enable hwmon data output for thermal sensors via I2C.Carolyn Wyborny2013-01-188-7/+469
| | | | | | | | | Some of our adapters have internal sensors that report thermal data. This patch enables reporting of that data via sysfs. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* igb: Add support functions to access thermal data.Carolyn Wyborny2013-01-184-1/+42
| | | | | | | | | | Some of our devices have internal sensors for reporting thermal data. This patch creates the interface to the sensors for exporting via sysfs. Subsequent patch will actually export the data. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* igb: Add i2c interface to igb.Carolyn Wyborny2013-01-188-1/+301
| | | | | | | | | | Some of our adapters have sensors on them accessible via i2c and a private interface. This patch implements the kernel interface for i2c to those sensors. Subsequent patches will provide functions to export that data. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* igb: Enable SR-IOV configuration via PCI sysfs interfaceGreg Rose2013-01-181-101/+219
| | | | | | | | | | Implement callback in the driver for the new PCI bus driver interface that allows the user to enable/disable SR-IOV virtual functions in a device via the sysfs interface. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* e1000e: add support for hardware timestamping on some devicesBruce Allan2013-01-187-8/+462
| | | | | | | | | | | | On 82574, 82583, 82579, I217 and I218 add support for hardware time stamping of all or no Rx packets and Tx packets which have the SKBTX_HW_TSTAMP flag set. Update the .get_ts_info ethtool operation to report the supported time stamping modes, and enable and disable hardware time stamping with the SIOCSHWTSTAMP ioctl. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* e1000e: Use standard #defines for PCIe Capability ASPM fieldsBjorn Helgaas2013-01-181-2/+9
| | | | | | | | | | | | | | | | Use the standard #defines for PCIe Capability ASPM fields. Previously we used PCIE_LINK_STATE_L0S and PCIE_LINK_STATE_L1 directly, but these are defined for the Linux ASPM interfaces, e.g., pci_disable_link_state(), and only coincidentally match the actual register bits. PCIE_LINK_STATE_CLKPM, also part of that interface, does not match the register bit. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: e1000-devel@lists.sourceforge.net Acked-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* e1000e: add ethtool .get_eee/.set_eeeBruce Allan2013-01-185-23/+167
| | | | | | | | | Add the ability to query and set Energy Efficient Ethernet parameters via ethtool for applicable devices. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* e1000e: merge multiple conditional statements into oneBruce Allan2013-01-161-6/+5
| | | | | | | | Cleanup a set of conditional tests. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* e1000e: cleanup code duplicationBruce Allan2013-01-161-5/+1
| | | | | | | | | The removed code block is duplicated in e1000e_write_itr() so use that instead. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* e1000e: cleanup magic numberBruce Allan2013-01-161-2/+2
| | | | | | Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* e1000e: cleanup unnecessary line wrapBruce Allan2013-01-161-2/+1
| | | | | | Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* e1000e: cleanup unusual comment placementBruce Allan2013-01-161-1/+1
| | | | | | Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* e1000e: cleanup redundant statistics counterBruce Allan2013-01-161-1/+0
| | | | | | | | rx_long_byte_count can be removed since it is duplicated in rx_bytes Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* e1000e: resolve checkpatch PREFER_PR_LEVEL warningBruce Allan2013-01-161-5/+3
| | | | | | | | | | | | | WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... v2 - remove unnecessary "e1000e:" prefix as pointed out by Joe Perches since that produces a redundant "e1000e:" in the log message Cc: Joe Perches <joe@perches.com> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* e1000e: add missing bailout on errorBruce Allan2013-01-151-0/+2
| | | | | | | | ...discovered during code inspection. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* e1000e: unexpected "Reset adapter" message when cable pulledBruce Allan2013-01-152-20/+21
| | | | | | | | | | | | | | | | | When there is heavy traffic and the cable is pulled, the driver must reset the adapter to flush the Tx queue in hardware. This causes the reset path to be scheduled and logs the message "Reset adapter" which could be mis- interpreted as an error by the user. Change how the reset path is invoked for this scenario by using the same method done in an existing work-around for 80003es2lan (i.e. set a flag and if the flag is set in the reset code do not log the "Reset adapter" message since the reset is expected). Re-name the FLAG_RX_RESTART_NOW to FLAG_RESTART_NOW since it is used for resets in both the Rx and Tx specific code. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* e1000e: fix enabling of EEE on 82579 and I217Bruce Allan2013-01-151-29/+65
| | | | | | | | | | | | | | | | | | Energy Efficient Ethernet on 82579 and I217 should only be enabled if not disabled by the user, if the link is full duplex and the link partner has similar EEE capabilities (stored in different EMI registers on the two different parts). After enabling EEE, read the IEEE MMD register 3.1 (which is also stored in different EMI registers on the two different parts) to clear the count of received Tx/Rx LPI indications. Also, rename I217_EEE_100_SUPPORTED to I82579_EEE_100_SUPPORTED to indicate the bit is valid starting with I82579 (released before I217). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* e1000e: 82577: workaround for link drop issueBruce Allan2013-01-151-1/+7
| | | | | | | | | | When connected to certain switches, the 82577 PHY might drop link unexpectedly. Work around the issue by setting the Mean Square Error higher than the hardware default. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* e1000e: helper functions for accessing EMI registersBruce Allan2013-01-151-19/+65
| | | | | | | | | | | The Extended Management Interface (EMI) registers are accessed by first writing the EMI register offset to the EMI_ADDR regiter and then either reading or writing the data to/from the EMI_DATA register. Add helper functions for performing these steps and convert existing EMI register accesses accordingly. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* e1000e: Invalid Image CSUM bit changed for I217Bruce Allan2013-01-152-8/+25
| | | | | | | | | On I217, the bit that indicates an invalid EEPROM (NVM) image checksum has changed from previous ICH/PCH LOMs. When validating the EEPROM checksum, check the appropriate bit on different devices. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* e1000e: Acquire/release semaphore when writing each EEPROM pageBruce Allan2013-01-151-11/+11
| | | | | | | | | | | | | When data blocks are written to the EEPROM, the HW/SW/FW semaphore must be held for the duration. With large data blocks on 80003es2lan, 82571 and 82572, this can take too long and cause the firmware to take ownership of the semaphore and consequently ownership of writes to the EEPROM. Instead, acquire and release the semaphore for each page of the block written. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* e1000e: SerDes autoneg flow controlBruce Allan2013-01-153-3/+132
| | | | | | | | | | | | Enables flow control to be set in SerDes autoneg mode. This is what is done for copper, but relies on a different set of register/bit checks since this is all done within the Mac registers. Remove inapplicable comment in defines.h Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* remove init of dev->perm_addr in driversJiri Pirko2013-01-088-17/+7
| | | | | | | | perm_addr is initialized correctly in register_netdevice() so to init it in drivers is no longer needed. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net: remove orphaned references to micro channelPaul Gortmaker2013-01-061-1/+1
| | | | | | | | | | | We threw away the microchannel support, but the removal wasn't completely trivial since there was namespace overlap with the machine check support, and hence some orphaned dependencies survived the deletion. This attempts to sweep those up and send them to the bit-bucket. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: remove unnecessary NET_ADDR_RANDOM "bitclean"Jiri Pirko2013-01-031-1/+0
| | | | | | | | NET_ADDR_SET is set in dev_set_mac_address() no need to alter dev->addr_assign_type value in drivers. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'for-linus' of ↵Linus Torvalds2012-12-131-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial branch from Jiri Kosina: "Usual stuff -- comment/printk typo fixes, documentation updates, dead code elimination." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) HOWTO: fix double words typo x86 mtrr: fix comment typo in mtrr_bp_init propagate name change to comments in kernel source doc: Update the name of profiling based on sysfs treewide: Fix typos in various drivers treewide: Fix typos in various Kconfig wireless: mwifiex: Fix typo in wireless/mwifiex driver messages: i2o: Fix typo in messages/i2o scripts/kernel-doc: check that non-void fcts describe their return value Kernel-doc: Convention: Use a "Return" section to describe return values radeon: Fix typo and copy/paste error in comments doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c various: Fix spelling of "asynchronous" in comments. Fix misspellings of "whether" in comments. eisa: Fix spelling of "asynchronous". various: Fix spelling of "registered" in comments. doc: fix quite a few typos within Documentation target: iscsi: fix comment typos in target/iscsi drivers treewide: fix typo of "suport" in various comments and Kconfig treewide: fix typo of "suppport" in various comments ...
| * treewide: fix typo of "suppport" in various commentsMasanari Iida2012-11-191-1/+1
| | | | | | | | | | Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | drivers/net: fix up function prototypes after __dev* removalsGreg Kroah-Hartman2012-12-079-18/+11
| | | | | | | | | | | | | | | | | | | | | | | | The __dev* removal patches for the network drivers ended up messing up the function prototypes for a bunch of drivers. This patch fixes all of them back up to be properly aligned. Bonus is that this almost removes 100 lines of code, always a nice surprise. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | igb: Update igb version to 4.1.2Carolyn Wyborny2012-12-061-2/+2
| | | | | | | | | | | | Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | igb: release already assigned MSI-X interrupts if setup failsStefan Assmann2012-12-061-6/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During MSI-X setup the system might run out of vectors. If this happens the already assigned vectors for this NIC should be freed before trying the disable MSI-X. Failing to do so results in the following oops. kernel BUG at drivers/pci/msi.c:341! [...] Call Trace: [<ffffffff8128f39d>] pci_disable_msix+0x3d/0x60 [<ffffffffa037d1ce>] igb_reset_interrupt_capability+0x27/0x5c [igb] [<ffffffffa037d229>] igb_clear_interrupt_scheme+0x26/0x2d [igb] [<ffffffffa0384268>] igb_request_irq+0x73/0x297 [igb] [<ffffffffa0384554>] __igb_open+0xc8/0x223 [igb] [<ffffffffa0384815>] igb_open+0x13/0x15 [igb] [<ffffffff8144592f>] __dev_open+0xbf/0x120 [<ffffffff81443e51>] __dev_change_flags+0xa1/0x180 [<ffffffff81445828>] dev_change_flags+0x28/0x70 [<ffffffff814af537>] devinet_ioctl+0x5b7/0x620 [<ffffffff814b01c8>] inet_ioctl+0x88/0xa0 [<ffffffff8142e8a0>] sock_do_ioctl+0x30/0x70 [<ffffffff8142ecf2>] sock_ioctl+0x72/0x270 [<ffffffff8118062c>] do_vfs_ioctl+0x8c/0x340 [<ffffffff81180981>] sys_ioctl+0xa1/0xb0 [<ffffffff815161a9>] system_call_fastpath+0x16/0x1b Code: 48 89 df e8 1f 40 ed ff 4d 39 e6 49 8b 45 10 75 b6 48 83 c4 18 5b 41 5c 41 5d 41 5e 41 5f c9 c3 48 8b 7b 20 e8 3e 91 db ff eb ae <0f> 0b eb fe 0f 1f 84 00 00 00 00 00 55 48 89 e5 0f 1f 44 00 00 RIP [<ffffffff8128e144>] free_msi_irqs+0x124/0x130 RSP <ffff880037503bd8> Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | igb: remove duplicate code for fallback interrupt initializationStefan Assmann2012-12-061-15/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | Given a small change to igb_init_interrupt_scheme() the function fits igb_request_irq() for MSI/legacy interrupts initialization as well, instead of duplicating most of its code there. Also adding a missing igb_configure() to igb_request_irq() for MSI fallback to work properly. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.1 at 2025-01-29 05:59:25 +0000