aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel
Commit message (Collapse)AuthorAgeFilesLines
...
* igb: Add macro for size of RETA indirection tableLaura Mihaela Vasilescu2013-08-222-1/+3
| | | | | | | | | | | | | RETA indirection table is used to assign the received data to a CPU in order to maintain an efficient distribution of network receive processing across multiple CPUs. This patch removes the hard-coded value for the size of the indirection table and defines a new macro. Signed-off-by: Laura Mihaela Vasilescu <laura.vasilescu@rosedu.org> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* igb: Fix get_fw_version function for all partsCarolyn Wyborny2013-08-224-44/+93
| | | | | | | | | This patch fixes issues found with older parts and older NVM tools in the display of the version in ethtool. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* igb: Add device support for flashless SKU of i210 deviceCarolyn Wyborny2013-08-224-2/+19
| | | | | | | | | This patch adds the specific device id support for versions of i210 that do not have flash installed. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* igb: Refactor NVM read functions to accommodate devices with no flashCarolyn Wyborny2013-08-224-60/+77
| | | | | | | | | | This patch refactors NVM read functions in order to accommodate i210 devices that do not have a flash. Previously, this was not supported on i210 devices. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* igb: Refactor of init_nvm_paramsCarolyn Wyborny2013-08-225-65/+92
| | | | | | | | | | This patch refactors the init_nvm_params functions for 82575 and adds a new function for the i210/i211 devices in order to configure separately the NVM functionality for the i210/i211 family. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* igb: Update MTU so that it is always at least a standard frame sizeAlexander Duyck2013-08-221-0/+4
| | | | | | | | | | This change makes it so that we limit the lower bound for max_frame_size to the size of a standard Ethernet frame. This allows for feature parity with other Intel based drivers such as ixgbe. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* igb: don't allow SR-IOV without MSI-XMitch A Williams2013-08-221-0/+5
| | | | | | | | | MSI-X interrupts are required for SR-IOV operation. Check to make sure they're enabled before allowing the user to turn on VFs. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* igb: Added rcu_lock to avoid raceAkeem G Abodunrin2013-08-221-1/+4
| | | | | | | | | | This patch adds rcu_lock to avoid possible race condition with igb_update_stats function accessing the rings in free_ q_vector. CC: Eric Dumazet <edumazet@google.com> Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* igb: Read register for latch_on without return valueAkeem G Abodunrin2013-08-223-19/+12
| | | | | | | | | This patch changes register read to "just-read" without returning a value for hardware to accurately latch the register value. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* igb: Reset the link when EEE setting changedAkeem G Abodunrin2013-08-221-1/+3
| | | | | | | | This patch resets the link, if link is up - whenever users enable or disable EEE Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2013-08-034-13/+11
|\ | | | | | | | | | | | | Merge net into net-next to setup some infrastructure Eric Dumazet needs for usbnet changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: rename CONFIG_NET_LL_RX_POLL to CONFIG_NET_RX_BUSY_POLLCong Wang2013-08-012-9/+9
| | | | | | | | | | | | | | | | | | | | Eliezer renames several *ll_poll to *busy_poll, but forgets CONFIG_NET_LL_RX_POLL, so in case of confusion, rename it too. Cc: Eliezer Tamir <eliezer.tamir@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * igb: fix vlan filtering in promisc mode when not in VT modeEmil Tantilov2013-07-281-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a VT mode check to make sure VLAN filters are disabled when in promisc mode and VT is not enabled. The problem with the previous check was that: E1000_MRQC_ENABLE_VMDQ is defined as 0x00000003 but when not in VT mode: mrqc |= E1000_MRQC_ENABLE_RSS_4Q (0x00000002) So the above check will trigger regardless if VT mode is being used or not. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ixgbe: Fix Tx Hang issue with lldpad on 82598EBJacob Keller2013-07-281-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes an issue with the 82598EB device, where lldpad is causing Tx Hangs on the card as soon as it attempts to configure DCB for the device. The adapter will continually Tx hang and reset in a loop. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Stable <stable@vger.kernel.org> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ixgbe: add support for quad-port x520 adapterDon Skidmore2013-07-316-17/+358
| | | | | | | | | | | | | | | | | | This is a x520 based quad-port (4x10Gbps) NIC with a single QSFP+ connector. Changes were required to our identify functions due to different eeprom address which is also included here. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbe: clear semaphore bits on timeoutsEmil Tantilov2013-07-311-24/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes the error code path in ixgbe_acquire_swfw_sync() to deal with cases where acquiring SW semaphore times out. In cases where the SW/FW semaphore bits were set (i.e. due to a crash) the driver will hang on load. With this patch the driver will clear the stuck bits if the semaphore was not acquired in the allotted time. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbe: rename LL_EXTENDED_STATS to use queue instead of qJacob Keller2013-07-311-6/+6
| | | | | | | | | | | | | | | | | | This patch renames the stats introduced by the busy poll feature so that they are more inline with the current statistics naming schemes. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbe: fix lockdep annotation issue for ptp's work itemJacob Keller2013-07-313-12/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a lockdep issue created due to ixgbe_ptp_stop always running cancel_work_sync even if the work item had not been created properly with INIT_WORK. This is caused because ixgbe_ptp_stop did not check to actually ensure PTP was running first. The new implementation introduces a state in the &adapter->state field which is used to indicate that PTP is running. (This replaces the IXGBE_FLAG2_PTP_ENABLED field). This state will use the atomic set_bit, test_bit, and test_and_clear_bit functions. ixgbe_ptp_stop will check to ensure that PTP was enabled, (and if not, it will not attempt to do any cleanup work from ixgbe_ptp_init). This resolves the lockdep annotation warning found by Stephen Hemminger Reported-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbe: call pcie_get_mimimum_link to check if device has enough bandwidthJacob Keller2013-07-311-7/+129
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch uses the new pcie_get_minimum_link function to perform a check to ensure that the adapter is hooked into a slot which is capable of providing the necessary bandwidth. This check supersedes the original method which only checked the current pci device. The new method is capable of determining the minimum speed and link of an entire PCI chain. -v2- * update the error message to include encoding loss CC: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbe: fix SFF data dumps of SFP+ modulesEmil Tantilov2013-07-303-60/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes several issues with the previous implementation of the SFF data dump of SFP+ modules: - removed the __IXGBE_READ_I2C flag - I2C access locking is handled in the HW specific routines - fixed the read loop to read data from ee->offset to ee->len - the reads fail if __IXGBE_IN_SFP_INIT is set in the process - this is needed because on some HW I2C operations can take long time and disrupt the SFP and link detection process Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Reported-by: Ben Hutchings <bhutchings@solarflare.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbe: fix semaphore lock for I2C read/writes on 82598Emil Tantilov2013-07-304-148/+182
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ixgbe_read/write_i2c_phy_82598() does not hold the SWFW_SYNC semaphore for the entire function. Instead the lock is held only during the phy.ops.read/write_reg operations. As result when the function is being called simultaneously the I2C read/writes can be corrupted. The following patch introduces the SWFW_SYNC semaphore for the entire ixgbe_read/write_i2c_phy_82598() function. To accomplish this I had to create 2 separate functions: ixgbe_read_phy_reg_mdi() ixgbe_write_phy_reg_mdi() Those functions are identical to ixgbe_read/write_phy_reg_generic() sans the locking, and can be used in ixgbe_read/write_i2c_phy_82598() with the SWFW_SYNC semaphore being held. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbe: bump version numberDon Skidmore2013-07-301-1/+1
| | | | | | | | | | | | | | | | | | Bump the version number to better match with a similar version of the out of tree driver. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbe: add new media type.Don Skidmore2013-07-304-7/+95
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for a new media type fiber_fixed. This is useful to avoid all the SFP+ hot plug support path on devices who's fix fiber need not worry about such things. This patch is needed for a following patch that adds support for "fiber_fixed" devices. v2: cleaned up logging message based on feedback from David Miller Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbe: fix fc autoneg ethtool reporting.Don Skidmore2013-07-304-16/+40
| | | | | | | | | | | | | | | | | | | | | | | | Originally ixgbe_device_supports_autoneg_fc() was only expected to be called by copper devices. This would lead to false information to be displayed via ethtool. v2: changed ixgbe_device_supports_autoneg_fc() to a bool function, it returns bool. Based on feedback from David Miller Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbe: Use pci_vfs_assigned instead of ixgbe_vfs_are_assignedAlexander Duyck2013-07-301-34/+1
| | | | | | | | | | | | | | | | | | | | This change makes it so that the ixgbe driver uses the generic helper pci_vfs_assigned instead of the ixgbe specific function ixgbe_vfs_are_assigned. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbe: Retain VLAN filtering in promiscuous + VT modeGreg Rose2013-07-302-2/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When using the new bridge FDB interface to allow SR-IOV virtual function network devices to communicate with SW bridged network devices the physical function is placed into promiscuous mode and hardware VLAN filtering is disabled. This defeats the ability to use VLAN tagging to isolate user networks. When the device is in promiscuous mode and VT mode simultaneously ensure that VLAN hardware filtering remains enabled. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | e1000e: fix I217/I218 PHY initialization flowBruce Allan2013-07-281-33/+50
| | | | | | | | | | | | | | | | | | | | The initialization of the PHY on I217/I218, while similar to 82579, must also check to see if the MAC and PHY are in the same mode (PCIe vs. SMBus) otherwise the PHY will be inaccessible by the MAC. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | e1000e: do not resume device from RPM suspend to read PHY status registersBruce Allan2013-07-281-3/+2
| | | | | | | | | | | | | | | | | | | | | | When the device is runtime suspended (e.g. when there is no link), do not wake it from D3 to read the PHY status; just set the values to typical power-on defaults as is done when runtime PM is not enabled and there is no link. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | e1000e: enable support for new device IDsBruce Allan2013-07-283-2/+14
| | | | | | | | | | | | | | | | | | | | | | The device IDs 0x15a0 and 0x15a1 are new SKUs that contain the same MAC as I217 and same PHY as I218. The device IDs 0x15a2 and 0x15a3 are the same as existing I218 SKUs. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | e1000e: ethtool unnecessarily takes device out of RPM suspendBruce Allan2013-07-281-28/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | A previous patch (commit e60b22c5b7 e1000e: fix accessing to suspended device) added .begin and .complete ethtool driver callbacks so that the device was resumed from Runtime Power Management (RPM) suspend state for all ethtool operations. This is overkill for operations which do not need to access any registers in the device. This patch makes it so that the device is taken out of RPM suspend only for those ethtool operations that must access device registers. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | e1000e: Tx hang on I218 when linked at 100Half and slow response at 10MbpsBruce Allan2013-07-282-7/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Tx hang is an unintended consequence of another workaround that is in the EEPROM for an issue with the firmware at 10Mbps when K1 (a power mode of the MAC-PHY interconnect) is enabled. The issue is resolved by setting appropriate Tx re-transmission timeouts in the PHY and associated K1 entry times in the MAC to allow enough transmissions to occur without triggering a Tx hang. A similar change is needed when linked at 10Mbps to improve latency. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | e1000e: low throughput using 4K jumbos on I218Bruce Allan2013-07-281-0/+2
| | | | | | | | | | | | | | | | Alter the packet buffer allocation accordingly. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | e1000e: iAMT connections drop on driver unload when jumbo frames enabledBruce Allan2013-07-281-11/+10
| | | | | | | | | | | | | | | | | | | | | | | | The jumbo frame configuration in the MAC/PHY should be reverted on 82579 and newer parts when the interface is brought down (not just when the MTU is changed back to standard frame size) otherwise iAMT connections (e.g. SoL, IDE-R) will be dropped and cannot be re-acquired until the MTU is changed again. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | e1000e: disable ASPM L1 on 82583Bruce Allan2013-07-281-0/+1
| | | | | | | | | | | | | | | | | | | | The 82583 can disappear off the PCIe bus. This device is a modified 82574 which had the same problem which was fixed by disabling ASPM L1; disabling it on 82583 fixes the issue on this device. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | e1000e: Use marco instead of digit for defining e1000_rx_desc_packet_splitWei Yang2013-07-282-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | In structure e1000_rx_desc_packet_split, the size of wb.upper.length is defined by a digit. This may introduce some problem when the length is changed. This patch use the macro PS_PAGE_BUFFERS for the definition. And move the definition to hw.h. Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | e1000e: Remove duplicate assignment of default rx/tx ring sizeWei Yang2013-07-281-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tx_ring/rx_ring size is assigned in function e1000_alloc_queues(), which is called by e1000_sw_init() in the early stage of e1000_probe(). This patch just remove the duplicate assignment of this default ring size value. Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Reviewed-by: Gavin Shan <shangw@linux.vnet.ibm.com> Reviewed-by: Da Yu Qiu <qiudayu@cn.ibm.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | e1000e: restore call to pci_clear_master()Dean Nelson2013-07-281-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In attempting to resolve a minor merge conflict, commit e5f2ef7ab4690d2e8faa (Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net) accidentally dropped a call to pci_clear_master() that was intended to remain in place. Commit 4e0855dff094b0d56d6b (e1000e: fix pci-device enable-counter balance) replaced a call to pci_disable_device() by one to pci_clear_master(). And then commit 66148babe728f3e00e13 (e1000e: fix runtime power management transitions) deleted a number of lines starting two lines following that call. This patch restores the call to pci_clear_master() in __e1000_shutdown(). v2: added summary lines (enclosed in parens) following commit IDs Signed-off-by: Dean Nelson <dnelson@redhat.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | e100: dump small buffers via %*phAndy Shevchenko2013-07-281-9/+6
|/ | | | | | Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* net: rename ll methods to busy-pollEliezer Tamir2013-07-101-2/+2
| | | | | | | | | | | Rename ndo_ll_poll to ndo_busy_poll. Rename sk_mark_ll to sk_mark_napi_id. Rename skb_mark_ll to skb_mark_napi_id. Correct all useres of these functions. Update comments and defines in include/net/busy_poll.h Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: rename include/net/ll_poll.h to include/net/busy_poll.hEliezer Tamir2013-07-101-1/+1
| | | | | | | Rename the file and correct all the places where it is included. Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2013-07-0928-226/+765
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: "This is a re-do of the net-next pull request for the current merge window. The only difference from the one I made the other day is that this has Eliezer's interface renames and the timeout handling changes made based upon your feedback, as well as a few bug fixes that have trickeled in. Highlights: 1) Low latency device polling, eliminating the cost of interrupt handling and context switches. Allows direct polling of a network device from socket operations, such as recvmsg() and poll(). Currently ixgbe, mlx4, and bnx2x support this feature. Full high level description, performance numbers, and design in commit 0a4db187a999 ("Merge branch 'll_poll'") From Eliezer Tamir. 2) With the routing cache removed, ip_check_mc_rcu() gets exercised more than ever before in the case where we have lots of multicast addresses. Use a hash table instead of a simple linked list, from Eric Dumazet. 3) Add driver for Atheros CQA98xx 802.11ac wireless devices, from Bartosz Markowski, Janusz Dziedzic, Kalle Valo, Marek Kwaczynski, Marek Puzyniak, Michal Kazior, and Sujith Manoharan. 4) Support reporting the TUN device persist flag to userspace, from Pavel Emelyanov. 5) Allow controlling network device VF link state using netlink, from Rony Efraim. 6) Support GRE tunneling in openvswitch, from Pravin B Shelar. 7) Adjust SOCK_MIN_RCVBUF and SOCK_MIN_SNDBUF for modern times, from Daniel Borkmann and Eric Dumazet. 8) Allow controlling of TCP quickack behavior on a per-route basis, from Cong Wang. 9) Several bug fixes and improvements to vxlan from Stephen Hemminger, Pravin B Shelar, and Mike Rapoport. In particular, support receiving on multiple UDP ports. 10) Major cleanups, particular in the area of debugging and cookie lifetime handline, to the SCTP protocol code. From Daniel Borkmann. 11) Allow packets to cross network namespaces when traversing tunnel devices. From Nicolas Dichtel. 12) Allow monitoring netlink traffic via AF_PACKET sockets, in a manner akin to how we monitor real network traffic via ptype_all. From Daniel Borkmann. 13) Several bug fixes and improvements for the new alx device driver, from Johannes Berg. 14) Fix scalability issues in the netem packet scheduler's time queue, by using an rbtree. From Eric Dumazet. 15) Several bug fixes in TCP loss recovery handling, from Yuchung Cheng. 16) Add support for GSO segmentation of MPLS packets, from Simon Horman. 17) Make network notifiers have a real data type for the opaque pointer that's passed into them. Use this to properly handle network device flag changes in arp_netdev_event(). From Jiri Pirko and Timo Teräs. 18) Convert several drivers over to module_pci_driver(), from Peter Huewe. 19) tcp_fixup_rcvbuf() can loop 500 times over loopback, just use a O(1) calculation instead. From Eric Dumazet. 20) Support setting of explicit tunnel peer addresses in ipv6, just like ipv4. From Nicolas Dichtel. 21) Protect x86 BPF JIT against spraying attacks, from Eric Dumazet. 22) Prevent a single high rate flow from overruning an individual cpu during RX packet processing via selective flow shedding. From Willem de Bruijn. 23) Don't use spinlocks in TCP md5 signing fast paths, from Eric Dumazet. 24) Don't just drop GSO packets which are above the TBF scheduler's burst limit, chop them up so they are in-bounds instead. Also from Eric Dumazet. 25) VLAN offloads are missed when configured on top of a bridge, fix from Vlad Yasevich. 26) Support IPV6 in ping sockets. From Lorenzo Colitti. 27) Receive flow steering targets should be updated at poll() time too, from David Majnemer. 28) Fix several corner case regressions in PMTU/redirect handling due to the routing cache removal, from Timo Teräs. 29) We have to be mindful of ipv4 mapped ipv6 sockets in upd_v6_push_pending_frames(). From Hannes Frederic Sowa. 30) Fix L2TP sequence number handling bugs, from James Chapman." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1214 commits) drivers/net: caif: fix wrong rtnl_is_locked() usage drivers/net: enic: release rtnl_lock on error-path vhost-net: fix use-after-free in vhost_net_flush net: mv643xx_eth: do not use port number as platform device id net: sctp: confirm route during forward progress virtio_net: fix race in RX VQ processing virtio: support unlocked queue poll net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bit Documentation: Fix references to defunct linux-net@vger.kernel.org net/fs: change busy poll time accounting net: rename low latency sockets functions to busy poll bridge: fix some kernel warning in multicast timer sfc: Fix memory leak when discarding scattered packets sit: fix tunnel update via netlink dt:net:stmmac: Add dt specific phy reset callback support. dt:net:stmmac: Add support to dwmac version 3.610 and 3.710 dt:net:stmmac: Allocate platform data only if its NULL. net:stmmac: fix memleak in the open method ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available net: ipv6: fix wrong ping_v6_sendmsg return value ...
| * net/trivial: replace numeric with standard PM state macrosYijing Wang2013-06-281-2/+2
| | | | | | | | | | | | | | | | | | Use standard PM state macros PCI_Dx instead of numeric 0/1/2.. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: Move MII out from under NET_CORE and hide itBen Hutchings2013-06-191-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | All drivers that select MII also need to select NET_CORE because MII depends on it. This is a bit ridiculous because NET_CORE is just a menu option that doesn't enable any code by itself. There is also no need for it to be a visible option, since its users all select it. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ixgbe: add extra stats for ndo_ll_pollEliezer Tamir2013-06-103-0/+60
| | | | | | | | | | | | | | | | | | | | Add additional statistics to the ixgbe driver for ndo_ll_poll Defined under LL_EXTENDED_STATS Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ixgbe: add support for ndo_ll_pollEliezer Tamir2013-06-103-8/+177
| | | | | | | | | | | | | | | | | | | | | | | | | | Add the ixgbe driver code implementing ndo_ll_poll. Adds ndo_ll_poll method and locking between it and the napi poll. When receiving a packet we use skb_mark_ll to record the napi it came from. Add each napi to the napi_hash right after netif_napi_add(). Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * IXGBE: Set the SW prio_tc values at initialization to the HW setting.Amir Hanania2013-05-214-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | Set the SW prio_tc values at initialization to the HW setting. Setting the SW prio_tc default values to be the HW setting by reading the rtrup2tc register. For any TC change we need to reset the device. This will remove the need to reset the device at the first time we call ixgbe_dcbnl_ieee_setets. Signed-off-by: Amir Hanania <amir.hanania@intel.com> Tested-by: Jack Morgan<jack.morgan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * igb: Removed unused i2c functionAkeem G. Abodunrin2013-05-211-5/+0
| | | | | | | | | | | | | | | | This patch removes unused i2c function definition. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * igb: Implementation of i210/i211 LED supportAkeem G. Abodunrin2013-05-212-4/+10
| | | | | | | | | | | | | | | | | | This patch fixes LED issues with i210 and i211 devices, due to changes in the device registers. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * igb: Fix possible panic caused by Rx traffic arrival while interface is downCarolyn Wyborny2013-05-211-2/+5
| | | | | | | | | | | | | | | | | | | | This patch reorders disabling napi and irqs during igb_down. This is done to avoid possible panic's found in other Intel drivers when Rx traffic arrives while interface is going down. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * igb: Fix set_ethtool function to call update nvm for entire imageCarolyn Wyborny2013-05-211-4/+2
| | | | | | | | | | | | | | | | | | | | | | This patch fixes a problem where we were only checking to update checksum on first part of nvm image. Newer parts have multiple checksum fields and checksum function will accommodate that as long as we call it in the first place for any changes made. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.1 at 2025-08-18 02:23:28 +0000