aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/misc
Commit message (Collapse)AuthorAgeFilesLines
* USB: yurex.c: remove dbg() usageGreg Kroah-Hartman2012-05-011-5/+9
| | | | | | | | | dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Tomoki Sekiyama <tomoki.sekiyama@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: uss720.c: remove dbg() usageGreg Kroah-Hartman2012-05-011-15/+19
| | | | | | | | dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: usblcd.c: remove dbg() usageGreg Kroah-Hartman2012-05-011-2/+2
| | | | | | | | | | | | dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Zack Parsons <k3bacon@gmail.com> CC: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: rio500.c: remove dbg() usageGreg Kroah-Hartman2012-05-011-16/+21
| | | | | | | | | dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Cesar Miquel <miquel@df.uba.ar> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: idmouse.c: remove dbg() usageGreg Kroah-Hartman2012-05-011-1/+2
| | | | | | | | | | | dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: appledisplay.c: remove dbg() usageGreg Kroah-Hartman2012-05-011-6/+6
| | | | | | | | | | | | dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Andrew Morton <akpm@linux-foundation.org> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Mike Frysinger <vapier@gentoo.org> CC: Arun Sharma <asharma@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: usbtest: two super speed fixes for usbtestPaul Zimmerman2012-05-011-5/+12
| | | | | | | | | | | | | bMaxPacketSize0 field for super speed is a power of 2, not a count. The size itself is always 512. Max packet size for a super speed bulk endpoint is 1024, so allocate the urb size in halt_simple() accordingly. Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 3.4-rc4 into usb-next.Greg Kroah-Hartman2012-04-2210-155/+139
|\ | | | | | | | | | | | | | | | | This resolves the conflict in: drivers/usb/host/ehci-fsl.c And picks up loads of xhci bugfixes to make it easier for others to test with. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: yurex.c: remove err() usageGreg Kroah-Hartman2012-04-201-17/+23
| | | | | | | | | | | | | | | | err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: uss720.c: remove err() usageGreg Kroah-Hartman2012-04-201-6/+9
| | | | | | | | | | | | | | | | err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: usblcd.c: remove err() usageGreg Kroah-Hartman2012-04-201-8/+12
| | | | | | | | | | | | | | | | | | | | | | | | err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Zack Parsons <k3bacon@gmail.com> CC: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: rio500.c: remove err() usageGreg Kroah-Hartman2012-04-201-9/+19
| | | | | | | | | | | | | | | | | | err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Cesar Miquel <miquel@df.uba.ar> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: legousbtower.c: remove err() usageGreg Kroah-Hartman2012-04-201-20/+25
| | | | | | | | | | | | | | | | | | err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Juergen Stuber <starblue@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: ldusb.c: remove err() usageGreg Kroah-Hartman2012-04-201-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Michael Hund <mhund@ld-didactic.de> CC: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: iowarrior.c: remove err() usageGreg Kroah-Hartman2012-04-201-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Rusty Russell <rusty@rustcorp.com.au> CC: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> CC: Mauro Carvalho Chehab <mchehab@redhat.com> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: idmouse.c: remove err() usageGreg Kroah-Hartman2012-04-201-3/+3
| | | | | | | | | | | | | | | | | | | | | | err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: emi62.c: remove err() usageGreg Kroah-Hartman2012-04-201-43/+19
| | | | | | | | | | | | | | | | | | | | | | err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Paul Gortmaker <paul.gortmaker@windriver.com> CC: Andrew Morton <akpm@linux-foundation.org> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: emi26.c: remove err() usageGreg Kroah-Hartman2012-04-201-41/+18
| | | | | | | | | | | | | | | | | | | | | | err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Paul Gortmaker <paul.gortmaker@windriver.com> CC: Andrew Morton <akpm@linux-foundation.org> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: yurex: Fix missing URB_NO_TRANSFER_DMA_MAP flag in urbTomoki Sekiyama2012-04-181-1/+1
| | | | | | | | | | | | | | | | | | | | Current probing code is setting URB_NO_TRANSFER_DMA_MAP flag into a wrong urb structure, and this causes BUG_ON with some USB host implementations. This patch fixes the issue. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: yurex: Remove allocation of coherent buffer for setup-packet bufferTomoki Sekiyama2012-04-181-6/+2
| | | | | | | | | | | | | | | | | | | | Removes allocation of coherent buffer for the control-request setup-packet buffer from the yurex driver. Using coherent buffers for setup-packet is obsolete and does not work with some USB host implementations. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | drivers/usb/misc/usbtest.c: add kfreesJulia Lawall2012-04-181-0/+2
| | | | | | | | | | | | | | | | Free the two previously allocated buffers before exiting the function in an error case. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: usbtest: avoid integer overflow in alloc_sglist()Xi Wang2012-04-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | A large `nents' from userspace could overflow the allocation size, leading to memory corruption. | alloc_sglist() | usbtest_ioctl() Use kmalloc_array() to avoid the overflow. Signed-off-by: Xi Wang <xi.wang@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: usbtest: avoid integer overflow in test_ctrl_queue()Xi Wang2012-04-171-2/+3
|/ | | | | | | | | | | | | | Avoid overflowing context.count = param->sglen * param->iterations, where both `sglen' and `iterations' are from userspace. | test_ctrl_queue() | usbtest_ioctl() Keep -EOPNOTSUPP for error code. Signed-off-by: Xi Wang <xi.wang@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: usbsevseg: fix max lengthHarrison Metzger2012-01-241-1/+1
| | | | | | | | | | | This changes the max length for the usb seven segment delcom device to 8 from 6. Delcom has both 6 and 8 variants and having 8 works fine with devices which are only 6. Signed-off-by: Harrison Metzger <harrisonmetz@gmail.com> Signed-off-by: Stuart Pook <stuart@acm.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* drivers/usb/misc/emi26.c & emi62.c: fix warningsAndrew Morton2012-01-242-6/+0
| | | | | | | | | | | | drivers/usb/misc/emi26.c:40: warning: 'emi26_init' declared 'static' but never defined drivers/usb/misc/emi26.c:41: warning: 'emi26_exit' declared 'static' but never defined drivers/usb/misc/emi62.c:49: warning: 'emi62_init' declared 'static' but never defined drivers/usb/misc/emi62.c:50: warning: 'emi62_exit' declared 'static' but never defined Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* module_param: make bool parameters really bool (drivers & misc)Rusty Russell2012-01-132-2/+2
| | | | | | | | | | | | module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* Merge branch 'for-linus' of ↵Linus Torvalds2012-01-101-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (68 commits) hid-input/battery: add FEATURE quirk hid-input/battery: remove battery_val hid-input/battery: power-supply type really *is* a battery hid-input/battery: make the battery setup common for INPUTs and FEATUREs hid-input/battery: deal with both FEATURE and INPUT report batteries hid-input/battery: add quirks for battery hid-input/battery: remove apparently redundant kmalloc hid-input: add support for HID devices reporting Battery Strength HID: hid-multitouch: add support 9 new Xiroku devices HID: multitouch: add support for 3M 32" HID: multitouch: add support of Atmel multitouch panels HID: usbhid: defer LED setting to a workqueue HID: usbhid: hid-core: submit queued urbs before suspend HID: usbhid: remove LED_ON HID: emsff: use symbolic name instead of hardcoded PID constant HID: Enable HID_QUIRK_MULTI_INPUT for Trio Linker Plus II HID: Kconfig: fix syntax HID: introduce proper dependency of HID_BATTERY on POWER_SUPPLY HID: multitouch: support PixArt optical touch screen HID: make parser more verbose about parsing errors by default ... Fix up rename/delete conflict in drivers/hid/hid-hyperv.c (removed in staging, moved in this branch) and similarly for the rules for same file in drivers/staging/hv/{Kconfig,Makefile}.
| * HID/usbled: add support for Dream Cheeky DL100B Mailbox Friends AlertDan Delaney2011-11-201-0/+2
| | | | | | | | | | | | | | | | Adding support for Dream Cheeky DL1800B Friend Alert device. Signed-off-by: Dan Delaney <drdelaney@loclhst.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | Merge branch 'usb-next' of ↵Linus Torvalds2012-01-092-3/+4
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (232 commits) USB: Add USB-ID for Multiplex RC serial adapter to cp210x.c xhci: Clean up 32-bit build warnings. USB: update documentation for usbmon usb: usb-storage doesn't support dynamic id currently, the patch disables the feature to fix an oops drivers/usb/class/cdc-acm.c: clear dangling pointer drivers/usb/dwc3/dwc3-pci.c: introduce missing kfree drivers/usb/host/isp1760-if.c: introduce missing kfree usb: option: add ZD Incorporated HSPA modem usb: ch9: fix up MaxStreams helper USB: usb-skeleton.c: cleanup open_count USB: usb-skeleton.c: fix open/disconnect race xhci: Properly handle COMP_2ND_BW_ERR USB: remove dead code from suspend/resume path USB: add quirk for another camera drivers: usb: wusbcore: Fix dependency for USB_WUSB xhci: Better debugging for critical host errors. xhci: Be less verbose during URB cancellation. xhci: Remove debugging about ring structure allocation. xhci: Remove debugging about toggling cycle bits. xhci: Remove debugging for individual transfers. ...
| * | USB: isight: fix kernel bug when loading firmwareGreg Kroah-Hartman2011-12-091-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We were sending data on the stack when uploading firmware, which causes some machines fits, and is not allowed. Fix this by using the buffer we already had around for this very purpose. Reported-by: Wouter M. Koolen <wmkoolen@cwi.nl> Tested-by: Wouter M. Koolen <wmkoolen@cwi.nl> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: remove BKL commentsDavidlohr Bueso2011-11-261-1/+0
| |/ | | | | | | | | | | | | The BKL is a gonner. Signed-off-by: Davidlohr Bueso <dave@gnu.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | Merge branch 'for-linus2' of ↵Linus Torvalds2012-01-082-2/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits) reiserfs: Properly display mount options in /proc/mounts vfs: prevent remount read-only if pending removes vfs: count unlinked inodes vfs: protect remounting superblock read-only vfs: keep list of mounts for each superblock vfs: switch ->show_options() to struct dentry * vfs: switch ->show_path() to struct dentry * vfs: switch ->show_devname() to struct dentry * vfs: switch ->show_stats to struct dentry * switch security_path_chmod() to struct path * vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb vfs: trim includes a bit switch mnt_namespace ->root to struct mount vfs: take /proc/*/mounts and friends to fs/proc_namespace.c vfs: opencode mntget() mnt_set_mountpoint() vfs: spread struct mount - remaining argument of next_mnt() vfs: move fsnotify junk to struct mount vfs: move mnt_devname vfs: move mnt_list to struct mount vfs: switch pnode.h macros to struct mount * ...
| * | switch device_get_devnode() and ->devnode() to umode_t *Al Viro2012-01-032-2/+2
| |/ | | | | | | | | | | | | both callers of device_get_devnode() are only interested in lower 16bits and nobody tries to return anything wider than 16bit anyway. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | USB: convert drivers/usb/* to use module_usb_driver()Greg Kroah-Hartman2011-11-1816-347/+16
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the drivers in drivers/usb/* to use the module_usb_driver() macro which makes the code smaller and a bit simpler. Added bonus is that it removes some unneeded kernel log messages about drivers loading and/or unloading. Cc: Simon Arlott <cxacru@fire.lp0.eu> Cc: Duncan Sands <duncan.sands@free.fr> Cc: Matthieu CASTET <castet.matthieu@free.fr> Cc: Stanislaw Gruszka <stf_xl@wp.pl> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Oliver Neukum <oliver@neukum.name> Cc: Juergen Stuber <starblue@users.sourceforge.net> Cc: Cesar Miquel <miquel@df.uba.ar> Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Michael Hund <mhund@ld-didactic.de> Cc: Zack Parsons <k3bacon@gmail.com> Cc: Melchior FRANZ <mfranz@aon.at> Cc: Tomoki Sekiyama <tomoki.sekiyama@gmail.com> Cc: Dan Carpenter <error27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: Provide usb_speed_string() functionMichal Nazarewicz2011-09-181-19/+2
| | | | | | | | | | | | | | | | | | | In a few places in the kernel, the code prints a human-readable USB device speed (eg. "high speed"). This involves a switch statement sometimes wrapped around in ({ ... }) block leading to code repetition. To mitigate this issue, this commit introduces usb_speed_string() function, which returns a human-readable name of provided speed. It also changes a few places switch was used to use this new function. This changes a bit the way the speed is printed in few instances at the same time standardising it. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: use usb_endpoint_maxp() instead of le16_to_cpu()Kuninori Morimoto2011-08-238-18/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now ${LINUX}/drivers/usb/* can use usb_endpoint_maxp(desc) to get maximum packet size instead of le16_to_cpu(desc->wMaxPacketSize). This patch fix it up Cc: Armin Fuerst <fuerst@in.tum.de> Cc: Pavel Machek <pavel@ucw.cz> Cc: Johannes Erdfelt <johannes@erdfelt.com> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Oliver Neukum <oliver@neukum.name> Cc: David Kubicek <dave@awk.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Brad Hards <bhards@bigpond.net.au> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Dahlmann <dahlmann.thomas@arcor.de> Cc: David Brownell <david-b@pacbell.net> Cc: David Lopo <dlopo@chipidea.mips.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Xie Xiaobo <X.Xie@freescale.com> Cc: Li Yang <leoli@freescale.com> Cc: Jiang Bo <tanya.jiang@freescale.com> Cc: Yuan-hsin Chen <yhchen@faraday-tech.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Ben Dooks <ben@simtec.co.uk> Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: Herbert Pötzl <herbert@13thfloor.at> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Roman Weissgaerber <weissg@vienna.at> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Tony Olech <tony.olech@elandigitalsystems.com> Cc: Florian Floe Echtler <echtler@fs.tum.de> Cc: Christian Lucht <lucht@codemercs.com> Cc: Juergen Stuber <starblue@sourceforge.net> Cc: Georges Toth <g.toth@e-biz.lu> Cc: Bill Ryder <bryder@sgi.com> Cc: Kuba Ober <kuba@mareimbrium.org> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usbtest: use URB_ZERO_PACKET for BULK-OUT transfersSebastian Andrzej Siewior2011-08-231-1/+3
| | | | | | | | | | | | | | | | Executing | testusb -a -c 1 -t 3 -v 421 -s 2048 does not complete on the gadget side. g_zero enqueues a 4096 bytes long buffer. The host sends 2048bytes which is a multiple of wMaxPacketSize (either 64 or 512 bytes). The host is done with sending data but the gadget waits for more. Since the protocol does not include transfer-length-field sending a terminating zero packet seems the only way out. Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: misc: usblcd: fixed coding style issuesZack Parsons2011-08-221-56/+71
| | | | | | | Fixed multiple coding style issues Signed-off-by: Zack Parsons <k3bacon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: misc: usbled: fixed coding style issuesZack Parsons2011-08-221-11/+14
| | | | | | | Fixed multiple coding style issues Signed-off-by: Zack Parsons <k3bacon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* atomic: use <linux/atomic.h>Arun Sharma2011-07-261-1/+1
| | | | | | | | | | | | | | This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* treewide: Fix recieve/receive typosJoe Perches2011-06-241-14/+14
| | | | | | | Just spelling fixes. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* Merge branch 'usb-next' of ↵Linus Torvalds2011-05-233-17/+169
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (205 commits) USB: EHCI: Remove SPARC_LEON {read,write}_be definitions from ehci.h USB: UHCI: Support big endian GRUSBHC HC sparc: add {read,write}*_be routines USB: UHCI: Add support for big endian descriptors USB: UHCI: Use ACCESS_ONCE rather than using a full compiler barrier USB: UHCI: Add support for big endian mmio usb-storage: Correct adjust_quirks to include latest flags usb/isp1760: Fix possible unlink problems usb/isp1760: Move function isp1760_endpoint_disable() within file. USB: remove remaining usages of hcd->state from usbcore and fix regression usb: musb: ux500: add configuration and build options for ux500 dma usb: musb: ux500: add dma glue layer for ux500 usb: musb: ux500: add dma name for ux500 usb: musb: ux500: add ux500 specific code for gadget side usb: musb: fix compile error usb-storage: fix up the unusual_realtek device list USB: gadget: f_audio: Fix invalid dereference of initdata EHCI: don't rescan interrupt QHs needlessly OHCI: fix regression caused by nVidia shutdown workaround USB: OTG: msm: Free VCCCX regulator even if we can't set the voltage ...
| * usb: fix warning in usbtest module v2Greg Dietsche2011-05-101-3/+3
| | | | | | | | | | | | | | | | On amd64 unsigned is not as wide as pointer and this causes a compiler warning. Switching to unsigned long corrects the problem. Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * USB: ldusb: add several new devicesMichael Hund2011-05-031-10/+42
| | | | | | | | | | | | | | Added several new devices to ldusb and excluded them from the HID driver. Signed-off-by: Michael Hund <mhund@ld-didactic.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * usb/usbtest: fix test10 on superpseedSebastian Andrzej Siewior2011-05-021-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dummy_hcd + g_zero: |./testusb -a -s 1024 -v 1024 -t 10 | usbtest 2-1:3.0: subtest 14 error, status 0 with patch: ./testusb -a -t 10 |unknown speed /proc/bus/usb/001/002 | dummy_udc dummy_udc: disabled ep-a | dummy_udc dummy_udc: disabled ep-b | dummy_udc dummy_udc: enabled ep-a (ep1in-bulk) maxpacket 1024 | dummy_udc dummy_udc: enabled ep-b (ep2out-bulk) maxpacket 1024 | zero gadget: source/sink enabled | usbtest 1-1:3.0: TEST 10: queue 32 control calls, 1000 times | dummy_hcd dummy_hcd: timer fired with no URBs pending? |/proc/bus/usb/001/002 test 10, 0.022370 secs Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * usb/usbtest: print super on super speedSebastian Andrzej Siewior2011-05-021-0/+3
| | | | | | | | | | | | Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * USB: add queued-unlinks test case to usbtest driverAlan Stern2011-04-291-2/+118
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1452b) adds a new test case to the usbtest driver. Test 24 exercises the unlink-from-queue pathways in the host. It queues a user-specified number of bulk-OUT URBs of user-specified size, unlinks the fourth- and second-from-last URBs in the queue, and then waits to see if all the URBs complete in the expected way (except of course that the unlinked URBs might complete normally, if they weren't unlinked soon enough). This new test has confirmed the existence of a bug in the ehci-hcd driver, to be fixed by a separate patch. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * usb: ftdi-elan: Drop __TIME__ usageMichal Marek2011-04-131-2/+1
| | | | | | | | | | | | | | | | | | | | | | The kernel already prints its build timestamp during boot, no need to repeat it in random drivers and produce different object files each time. Cc: Tony Olech <tony.olech@elandigitalsystems.com> Cc: linux-usb@vger.kernel.org Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | treewide: fix a few typos in commentsJustin P. Mattock2011-05-101-1/+1
|/ | | | | | | | | | - kenrel -> kernel - whetehr -> whether - ttt -> tt - sss -> ss Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* Fix common misspellingsLucas De Marchi2011-03-311-1/+1
| | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
generated by cgit v1.1 at 2024-12-28 08:42:43 +0000