aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/w1
Commit message (Collapse)AuthorAgeFilesLines
* drivers/w1/slaves/w1_ds2408.c: add magic sequence to disable P0 test modeJean-Francois Dagenais2013-07-031-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | Power-up timing The DS2408 is sensitive to the power-on slew rate and can inadvertently power up with a test mode feature enabled. When this occurs, the P0 port does not respond to the Channel Access Write command. For most reliable operation, it is recommended to disable the test mode after every power-on reset using the Disable Test Mode sequence shown below. The 64-bit ROM code must be transmitted in the same bit sequence as with the Match ROM command, i.e., least significant bit first. This precaution is recommended in parasite power mode (VCC pin connected to GND) as well as with VCC power. Disable Test Mode: RST,PD,96h,<64-bit DS2408 ROM Code>,3Ch,RST,PD [akpm@linux-foundation.org: don't use kerenldoc token to introduce a non-kerneldoc comment, tweak whitespace] Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* w1: add family based automatic module loadingAlexander Stein2013-06-0312-0/+18
| | | | | | | | | This patch allows the 1-wire bus to autoload the corresponding module for each slave being attached. This works similar to bluetooth protocols. Signed-off-by: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 3.10-rc3 into char-misc-nextGreg Kroah-Hartman2013-05-271-5/+0
|\ | | | | | | | | | | We want the changes in here. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * drivers/w1/masters: don't check resource with devm_ioremap_resourceWolfram Sang2013-05-181-5/+0
| | | | | | | | | | | | | | devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | w1-gpio: Let device core handle pinctrlFabio Estevam2013-05-211-6/+0
|/ | | | | | | | | Since commit ab78029 (drivers/pinctrl: grab default handles from device core) we can rely on device core for handling pinctrl, so remove devm_pinctrl_get_select_default() from the driver. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds2013-05-091-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull removal of GENERIC_GPIO from Grant Likely: "GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it is possible to do so which has been causing confusion and breakage. This branch does the work to completely eliminate GENERIC_GPIO." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: gpio: update gpio Chinese documentation Remove GENERIC_GPIO config option Convert selectors of GENERIC_GPIO to GPIOLIB blackfin: force use of gpiolib m68k: coldfire: use gpiolib mips: pnx833x: remove requirement for GENERIC_GPIO openrisc: default GENERIC_GPIO to false avr32: default GENERIC_GPIO to false xtensa: remove explicit selection of GENERIC_GPIO sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB powerpc: remove redundant GENERIC_GPIO selection unicore32: default GENERIC_GPIO to false unicore32: remove unneeded select GENERIC_GPIO arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB arm: remove redundant GENERIC_GPIO selection mips: alchemy: require gpiolib mips: txx9: change GENERIC_GPIO to GPIOLIB mips: loongson: use GPIO driver on CONFIG_GPIOLIB mips: remove redundant GENERIC_GPIO select
| * Convert selectors of GENERIC_GPIO to GPIOLIBAlexandre Courbot2013-04-161-1/+1
| | | | | | | | | | | | | | | | | | GENERIC_GPIO is now equivalent to GPIOLIB and features that depended on GENERIC_GPIO can now depend on GPIOLIB to allow removal of this option. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
* | drivers/w1/slaves/w1_ds2760.c: fix the error handling in w1_ds2760_add_slave()Wei Yongjun2013-04-301-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Use platform_device_put() instead of platform_device_unregister() if platform_device_add() fail, and platform_device_del() should be used in the error handling case after platform_device_add() success. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Greg KH <greg@kroah.com> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | drivers/w1/slaves/w1_ds2781.c: fix the error handling in w1_ds2781_add_slave()Wei Yongjun2013-04-301-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Use platform_device_put() instead of platform_device_unregister() if platform_device_add() fail, and platform_device_del() should be used in the error handling case after platform_device_add() success. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Greg KH <greg@kroah.com> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | drivers/w1/slaves/w1_ds2780.c: fix the error handling in w1_ds2780_add_slave()Wei Yongjun2013-04-301-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Use platform_device_put() instead of platform_device_unregister() if platform_device_add() fail, and platform_device_del() should be used in the error handling case after platform_device_add() success. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Greg KH <greg@kroah.com> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | drivers/w1/slaves/w1_bq27000.c: fix the error handling in w1_bq27000_add_slave()Wei Yongjun2013-04-301-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Use platform_device_put() instead of platform_device_unregister() if platform_device_add() fails, and also add the return value check of platform_device_add_data(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Greg KH <greg@kroah.com> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge tag 'arizona-extcon-asoc' of ↵Greg Kroah-Hartman2013-03-262-3/+6
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc into char-misc-next Mark writes: ASoC/extcon: arizona: Fix interaction between HPDET and headphone outputs This patch series covers both ASoC and extcon subsystems and fixes an interaction between the HPDET function and the headphone outputs - we really shouldn't run HPDET while the headphone is active. The first patch is a refactoring to make the extcon side easier.
| * w1: fix oops when w1_search is called from netlink connectorMarcin Jurkowski2013-03-121-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Sat, Mar 02, 2013 at 10:45:10AM +0100, Sven Geggus wrote: > This is the bad commit I found doing git bisect: > 04f482faf50535229a5a5c8d629cf963899f857c is the first bad commit > commit 04f482faf50535229a5a5c8d629cf963899f857c > Author: Patrick McHardy <kaber@trash.net> > Date: Mon Mar 28 08:39:36 2011 +0000 Good job. I was too lazy to bisect for bad commit;) Reading the code I found problematic kthread_should_stop call from netlink connector which causes the oops. After applying a patch, I've been testing owfs+w1 setup for nearly two days and it seems to work very reliable (no hangs, no memleaks etc). More detailed description and possible fix is given below: Function w1_search can be called from either kthread or netlink callback. While the former works fine, the latter causes oops due to kthread_should_stop invocation. This patch adds a check if w1_search is serving netlink command, skipping kthread_should_stop invocation if so. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Josh Boyer <jwboyer@gmail.com> Tested-by: Sven Geggus <lists@fuchsschwanzdomain.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> # 3.0+
| * w1-gpio: fix unused variable warningJohan Hovold2013-03-121-0/+2
| | | | | | | | | | | | | | | | | | Commit 8a1861d997 ("w1-gpio: Simplify & get rid of defines") removed the compile guards from the device-tree id table, thereby generating a warning when building without device-tree support. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * w1-gpio: remove erroneous __exit and __exit_p()Johan Hovold2013-03-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Commit 8a1861d997 ("w1-gpio: Simplify & get rid of defines") changed (apparently unknowingly) the driver to a hotpluggable platform-device driver but did not not update the section markers for probe and remove (to __devinit/exit, which have since been removed). A later commit fixed the section mismatch for probe, but left remove marked with __exit. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> # 3.8 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | w1: ds2408: use ARRAY_SIZE instead of hard-coded numberJean-Francois Dagenais2013-03-151-4/+3
| | | | | | | | | | | | Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | w1: ds2408: make value read-back check a Kconfig optionJean-Francois Dagenais2013-03-152-6/+22
| | | | | | | | | | | | | | | | | | De-activating this reading back will effectively half the time required for a write to the output register. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | w1: mxc_w1: Convert to devm_ioremap_resource()Fabio Estevam2013-03-121-3/+3
|/ | | | | | | | | According to Documentation/driver-model/devres.txt: devm_request_and_ioremap() : obsoleted by devm_ioremap_resource() Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'late-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2013-02-281-1/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM SoC i.MX DT changes from Olof Johansson: "This branch contains of devicetree changes for the Freescale i.MX platform. The base patch of the branch changes the format of the dts files to a slightly different format that makes it easier to do derivative board definitions, but it also introduces a lot of churn in the process since every line of the file is touched. On top of that are a handful of the regular changes; enabling more boards as DT-based instead of legacy board files (mx25pdk), enabling another driver for devicetree and thus adding bindings (onewire), etc. I'm not happy about the churn, and will likely not take it for other platforms in the future." * tag 'late-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) ARM: dts: add dtsi for imx6q and imx6dl ARM: dts: rename imx6q.dtsi to imx6qdl.dtsi ARM: dts: i.MX6: Add regulator delay support ARM: dts: Add device tree entry for onewire master on i.MX53 ARM: i.MX53: Add clocks for i.mx53 onewire master. W1: Add device tree support to MXC onewire master. ARM: imx: enable imx6q-cpufreq support ARM: dts: Add apf51 basic support ARM i.MX6: change mxs usbphy clock usage ARM: dts: imx6q: Remove silicon version from SDMA firmware ARM i.MX53: dts: add oftree for MBa53 baseboard ARM i.MX53: add dts for the TQ tqma53 module ARM: dts: imx53: pinctrl update ARM i.MX51 babbage: Add keypad support ARM: dts: imx: Add imx51 KPP entry ARM: dts: imx25-karo-tx25: Put status entry in the end ARM: mx25pdk: Add device tree support ARM: dts: imx: use nodes label in board dts ARM: dts: add missing imx dtb targets ARM: boot: dts: Add an entry for imx27-pdk.dtb ...
| * W1: Add device tree support to MXC onewire master.Martin Fuzzey2013-02-101-1/+8
| | | | | | | | | | | | | | Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | w1: add support for DS2413 Dual Channel Addressable SwitchMariusz Bialonczyk2013-02-274-5/+189
| | | | | | | | | | | | | | | | | | | | Also fixes some whitespace inconsistency in Kconfig and w1_family.h when DS2408 chip support was added. Signed-off-by: Mariusz Bialonczyk <manio@skyboo.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge tag 'char-misc-3.9-rc1' of ↵Linus Torvalds2013-02-215-100/+90
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver patches from Greg Kroah-Hartman: "Here's the big char/misc driver patches for 3.9-rc1. Nothing major here, just lots of different driver updates (mei, hyperv, ipack, extcon, vmci, etc.). All of these have been in the linux-next tree for a while." * tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (209 commits) w1: w1_therm: Add force-pullup option for "broken" sensors w1: ds2482: Added 1-Wire pull-up support to the driver vme: add missing put_device() after device_register() fails extcon: max8997: Use workqueue to check cable state after completing boot of platform extcon: max8997: Set default UART/USB path on probe extcon: max8997: Consolidate duplicate code for checking ADC/CHG cable type extcon: max8997: Set default of ADC debounce time during initialization extcon: max8997: Remove duplicate code related to set H/W line path extcon: max8997: Move defined constant to header file extcon: max77693: Make max77693_extcon_cable static extcon: max8997: Remove unreachable code extcon: max8997: Make max8997_extcon_cable static extcon: max77693: Remove unnecessary goto statement to improve readability extcon: max77693: Convert to devm_input_allocate_device() extcon: gpio: Rename filename of extcon-gpio.c according to kernel naming style CREDITS: update email and address of Harald Hoyer extcon: arizona: Use MICDET for final microphone identification extcon: arizona: Always take the first HPDET reading as the final one extcon: arizona: Clear _trig_sts bits after jack detection extcon: arizona: Don't HPDET magic when headphones are enabled ...
| * | w1: w1_therm: Add force-pullup option for "broken" sensorsMichael Arndt2013-02-181-1/+10
| | | | | | | | | | | | | | | | | | Signed-off-by: Michael Arndt <michael@scriptkiller.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | w1: ds2482: Added 1-Wire pull-up support to the driverMichael Arndt2013-02-181-6/+45
| | | | | | | | | | | | | | | | | | Signed-off-by: Michael Arndt <michael@scriptkiller.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | w1-gpio: fix section mismatchHauke Mehrtens2013-01-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes the following section mismatch: WARNING: drivers/w1/masters/w1-gpio.o(.data+0x188): Section mismatch in reference from the variable w1_gpio_driver to the function .init.text:w1_gpio_probe() The variable w1_gpio_driver references the function __init w1_gpio_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | w1_therm: Retries: remove old code add CRCDavid Stevenson2013-01-151-19/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | w1_therm includes some obsolete code to detect bad_roms, this is no longer relevant. The retry code is only used for this bad_rom test, however there is a CRC check that detects a bad read, but does not trigger a retry. This patch removes all the bad_rom code and uses the CRC check to trigger retries. Signed-off-by: David Stevenson <david@avoncliff.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | drivers/w1/masters/mxc_w1.c: use devm_ functionsJulia Lawall2013-01-151-39/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The various devm_ functions allocate memory that is released when a driver detaches. This patch uses these functions for data that is allocated in the probe function of a platform device and is only freed in the remove function. At the same time, this fixes two faults. First, mdev, the result of kzalloc, was never freed. Second, on failure of ioremap, 0 was returned. This has been replaced by -EBUSY, which was the failure value for the call to request_mem_region, with which the call to ioremap has been combined. The warning message on failure of ioremap is dropped, because devm_request_and_ioremap already gives such messages on failure. Finally, the initial call to platform_get_resource is moved closer to the call to devm_request_and_ioremap, which takes care of checking whether its result is NULL, implying that a test on the result of this call to platform_get_resource is not needed. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | drivers/w1/masters/ds1wm.c: use devm_ functionsJulia Lawall2013-01-151-34/+18
| |/ | | | | | | | | | | | | | | | | | | | | The various devm_ functions allocate memory that is released when a driver detaches. This patch uses these functions for data that is allocated in the probe function of a platform device and is only freed in the remove function. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | w1: Convert to devm_ioremap_resource()Thierry Reding2013-01-221-5/+3
|/ | | | | | | | | | | | Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Drivers: w1: remove last __devexit_p() instanceGreg Kroah-Hartman2013-01-031-1/+1
| | | | | | | | | | | This slipped in through the merging of different trees. Remove __devexit_p() use in the mxc_w1 driver. Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ARM: OMAP: Fix drivers to depend on omap for internal devicesTony Lindgren2012-12-161-0/+1
| | | | | | | | | | | | | These devices are not available on other architectures, so let's limit them to omap. If the driver subsystem maintainers want to build test system wide changes without building for each target, it's easy to carry a test patch that just strips out the depends entries from Kconfig files. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* w1-gpio: Simplify & get rid of definesPantelis Antoniou2012-11-261-32/+26
| | | | | | | | | | | | There's no reason to have the OF defines; it complicates the driver. There's also no need for the funky platform_driver_probe. Add a few warnings in case there's a failure; helps us find out what went wrong. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1-gpio: Pinctrl-fyPantelis Antoniou2012-11-261-0/+7
| | | | | | | | | Enable pinctrl for w1-gpio. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: remove CONFIG_HOTPLUG ifdefsBill Pemberton2012-11-211-7/+0
| | | | | | | | | Remove conditional code based on CONFIG_HOTPLUG being false. It's always on now in preparation of it going away as an option. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: remove use of __devexitBill Pemberton2012-11-213-5/+5
| | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: remove use of __devinitBill Pemberton2012-11-213-5/+5
| | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: remove use of __devexit_pBill Pemberton2012-11-212-2/+2
| | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: mxc_w1: Fix commentFabio Estevam2012-11-211-1/+1
| | | | | | | | | We are dealing with mxc_w1 registers. While at it use dev_err() instead. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: mxc_w1: Convert to platform driverFabio Estevam2012-11-211-14/+2
| | | | | | | Using module_platform_driver() makes the code smaller and cleaner. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: mxc_w1: Adapt the clock name to the new clock frameworkFabio Estevam2012-11-211-3/+3
| | | | | | | | | | | | | | | | | | | | | | With the new i.mx clock framework the mxc_w1 clock is registered as: clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0"); So we do not need to pass "owire" string and can use NULL instead. While at it, also fix the clock error handling code. Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> ----- Changes since v2: - Add Ack's Changes since v1: - Fix clock error handling drivers/w1/masters/mxc_w1.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1/ds2482: use module_i2c_driver to simplify the codeWei Yongjun2012-10-241-12/+1
| | | | | | | | | | | | Use the module_i2c_driver() macro to make the code smaller and a bit simpler. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drivers/w1/masters: remove CONFIG_EXPERIMENTALKees Cook2012-10-241-1/+1
| | | | | | | | | | | | | This config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it. CC: Andrew Morton <akpm@linux-foundation.org> CC: Paul Walmsley <paul@pwsan.com> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'char-misc-3.6' of ↵Linus Torvalds2012-10-013-47/+77
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver merge from Greg Kroah-Hartman: "Here is the "big" char/misc driver tree update for the 3.7-rc1 merge window. Nothing major, just a number of driver updates and fixes, all of which have been in the linux-next releases for a while now either in my tree, or in Andrew's (the lis3l driver changes came from his tree last week). Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'char-misc-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (52 commits) drivers/misc/lis3lv02d/lis3lv02d_i2c.c: add lis3lv02d device tree init drivers/misc/lis3lv02d/lis3lv02d_spi.c: add lis3lv02d device tree init drivers/misc/lis3lv02d: remove lis3lv02d driver DT init drivers/misc/lis3lv02d/lis3lv02d_spi.c: add DT matching table passthru code drivers/misc/lis3lv02d: add generic DT matching code lis3lv02d: fix some comments specific to lis331dlh driver MISC: hpilo, remove pci_disable_device pcmcia: synclink_cs: fix potential tty NULL dereference drivers/char/mmtimer.c: Remove useless kfree drivers/char: removes unnecessary semicolon char/misc: remove CONFIG_EXPERIMENTAL dependencies mei: don't print buffer as a string mei: struct mei_message_data doesn't have to be packed mei: add error messages for open count errors misc: use module_spi_driver tifm: use module_pci_driver misc/at25, dt: Improve at25 SPI eeprom device tree bindings. mei: add lynx point pci device ids mei: fix max number of open handles mei: rename struct pci_dev *mei_device to mei_pdev ...
| * Merge v3.6-rc3 into 'char-misc-next'Greg Kroah-Hartman2012-08-273-47/+77
| |\ | | | | | | | | | | | | | | | | | | This resolves a conflict in: drivers/misc/mei/interrupt.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * onewire: w1-gpio: add ext_pullup_enable pin in platform dataDaniel Mack2012-08-161-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the process of porting boards to devicetree implemenation, we should keep information about external circuitry where they belong - the individual drivers. This patch adds a way to specify a GPIO to drive the (optional) external pull-up logic, rather than using a function pointer for that. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Acked-by: Ville Syrjälä <syrjala@sci.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * onewire: w1-gpio: add DT bindingsDaniel Mack2012-08-161-1/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add DT bindings to the w1-gpio driver, along with some documentation on how to use them. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Acked-by: Ville Syrjälä <syrjala@sci.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * w1: omap-hdq: drop ARCH dependencyFelipe Balbi2012-08-162-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let the driver compile everywhere while also removing unnecessary headers. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * w1: omap-hdq: remove unnecessary returnFelipe Balbi2012-08-161-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | trivial patch, no functional changes. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * w1: omap-hdq: convert to devm_* functionsFelipe Balbi2012-08-161-23/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | this lets us remove a bit of boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * w1: omap-hdq: convert to module_platform_driverFelipe Balbi2012-08-161-13/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | trivial patch, no functional changes. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.1 at 2024-12-27 04:36:17 +0000