From 123877b80ed62c3b897c53357b622574c023b642 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Thu, 8 Dec 2011 15:52:00 -0800 Subject: iwlwifi: do not set the sequence control bit is not needed Check the IEEE80211_TX_CTL_ASSIGN_SEQ flag from mac80211, then decide how to set the TX_CMD_FLG_SEQ_CTL_MSK bit. Setting the wrong bit in BAR frame whill make the firmware to increment the sequence number which is incorrect and cause unknown behavior. CC: stable@vger.kernel.org #3.0+ Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn-tx.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c index 35a6b71..df1540c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c @@ -91,7 +91,10 @@ static void iwlagn_tx_cmd_build_basic(struct iwl_priv *priv, tx_cmd->tid_tspec = qc[0] & 0xf; tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK; } else { - tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; + if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) + tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; + else + tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK; } iwlagn_tx_cmd_protection(priv, info, fc, &tx_flags); -- cgit v1.1 From f8c141c3e915e3a040d4c1badde28e23f8cbe255 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 9 Dec 2011 09:35:39 +0300 Subject: nfc: signedness bug in __nci_request() wait_for_completion_interruptible_timeout() returns -ERESTARTSYS if interrupted so completion_rc needs to be signed. The current code probably returns -ETIMEDOUT if we hit this situation, but after this patch is applied it will return -ERESTARTSYS. Signed-off-by: Dan Carpenter Signed-off-by: John W. Linville --- net/nfc/nci/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/nfc/nci/core.c b/net/nfc/nci/core.c index 4047e29..25dae3f 100644 --- a/net/nfc/nci/core.c +++ b/net/nfc/nci/core.c @@ -68,7 +68,7 @@ static int __nci_request(struct nci_dev *ndev, __u32 timeout) { int rc = 0; - unsigned long completion_rc; + long completion_rc; ndev->req_status = NCI_REQ_PEND; -- cgit v1.1 From 10636bc2d60942254bda149827b922c41f4cb4af Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Sat, 10 Dec 2011 18:59:43 +0530 Subject: ath9k: fix max phy rate at rate control init The stations always chooses 1Mbps for all trasmitting frames, whenever the AP is configured to lock the supported rates. As the max phy rate is always set with the 4th from highest phy rate, this assumption might be wrong if we have less than that. Fix that. Cc: stable@kernel.org Cc: Paul Stewart Reported-by: Ajay Gummalla Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/rc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index 8448281..cc5703b 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -1270,7 +1270,9 @@ static void ath_rc_init(struct ath_softc *sc, ath_rc_priv->max_valid_rate = k; ath_rc_sort_validrates(rate_table, ath_rc_priv); - ath_rc_priv->rate_max_phy = ath_rc_priv->valid_rate_index[k-4]; + ath_rc_priv->rate_max_phy = (k > 4) ? + ath_rc_priv->valid_rate_index[k-4] : + ath_rc_priv->valid_rate_index[k-1]; ath_rc_priv->rate_table = rate_table; ath_dbg(common, ATH_DBG_CONFIG, -- cgit v1.1 From 51e708c1049e721b9c5c48d026bc97ca8497d39a Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Tue, 13 Dec 2011 20:43:16 -0800 Subject: mwifiex: avoid double list_del in command cancel path Command cancel path cancels the current command and moves it to free command queue. While doing that it deletes the command entry from the pending list. This is not correct as the entry has been already deleted from the pending list at 'mwifiex_exec_next_cmd'. Fixing it. Also making sure the stale command pointer is cleaned and unaccessible for later use. Signed-off-by: Yogesh Ashok Powar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cmdevt.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c index ac27815..6e0a3ea 100644 --- a/drivers/net/wireless/mwifiex/cmdevt.c +++ b/drivers/net/wireless/mwifiex/cmdevt.c @@ -939,7 +939,6 @@ mwifiex_cancel_pending_ioctl(struct mwifiex_adapter *adapter) { struct cmd_ctrl_node *cmd_node = NULL, *tmp_node = NULL; unsigned long cmd_flags; - unsigned long cmd_pending_q_flags; unsigned long scan_pending_q_flags; uint16_t cancel_scan_cmd = false; @@ -949,12 +948,9 @@ mwifiex_cancel_pending_ioctl(struct mwifiex_adapter *adapter) cmd_node = adapter->curr_cmd; cmd_node->wait_q_enabled = false; cmd_node->cmd_flag |= CMD_F_CANCELED; - spin_lock_irqsave(&adapter->cmd_pending_q_lock, - cmd_pending_q_flags); - list_del(&cmd_node->list); - spin_unlock_irqrestore(&adapter->cmd_pending_q_lock, - cmd_pending_q_flags); mwifiex_insert_cmd_to_free_q(adapter, cmd_node); + mwifiex_complete_cmd(adapter, adapter->curr_cmd); + adapter->curr_cmd = NULL; spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, cmd_flags); } @@ -981,7 +977,6 @@ mwifiex_cancel_pending_ioctl(struct mwifiex_adapter *adapter) spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, cmd_flags); } adapter->cmd_wait_q.status = -1; - mwifiex_complete_cmd(adapter, adapter->curr_cmd); } /* -- cgit v1.1 From 81670a491849127cd5f86defd2cd03cef1b08d07 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 14 Dec 2011 08:22:35 -0800 Subject: iwlwifi: tx_sync only on PAN context Ted reported that he couldn't connect to some APs and bisected it to the tx_sync implementation. Disable it for the BSS context to fix this issue. Reported-by: Ted Ts'o Signed-off-by: Johannes Berg Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index bacc06c..e0e9a3d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2850,6 +2850,9 @@ static int iwlagn_mac_tx_sync(struct ieee80211_hw *hw, int ret; u8 sta_id; + if (ctx->ctxid != IWL_RXON_CTX_PAN) + return 0; + IWL_DEBUG_MAC80211(priv, "enter\n"); mutex_lock(&priv->shrd->mutex); @@ -2898,6 +2901,9 @@ static void iwlagn_mac_finish_tx_sync(struct ieee80211_hw *hw, struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; struct iwl_rxon_context *ctx = vif_priv->ctx; + if (ctx->ctxid != IWL_RXON_CTX_PAN) + return; + IWL_DEBUG_MAC80211(priv, "enter\n"); mutex_lock(&priv->shrd->mutex); -- cgit v1.1 From 78feb35b8161acd95c33a703ed6ab6f554d29387 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Wed, 14 Dec 2011 08:22:36 -0800 Subject: iwlwifi: allow to switch to HT40 if not associated My previous patch 34a5b4b6af104cf18eb50748509528b9bdbc4036 iwlwifi: do not re-configure HT40 after associated Fix the case of HT40 after association on specified AP, but it break the association for some APs and cause not able to establish connection. We need to address HT40 before and after addociation. CC: stable@vger.kernel.org #3.0+ Reported-by: Andrej Gelenberg Signed-off-by: Wey-Yi Guy Tested-by: Andrej Gelenberg Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn-rxon.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c index a7a6def..5c7c17c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c @@ -606,8 +606,8 @@ int iwlagn_mac_config(struct ieee80211_hw *hw, u32 changed) if (ctx->ht.enabled) { /* if HT40 is used, it should not change * after associated except channel switch */ - if (iwl_is_associated_ctx(ctx) && - !ctx->ht.is_40mhz) + if (!ctx->ht.is_40mhz || + !iwl_is_associated_ctx(ctx)) iwlagn_config_ht40(conf, ctx); } else ctx->ht.is_40mhz = false; -- cgit v1.1