From 87c46b6c3d9c4d7f22bc553945728f5a82e9248a Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 4 May 2013 14:38:59 +0100
Subject: ARM: finally enable IRQ time accounting config
We've had IRQ time accounting for the last six months, except for the
Kconfig symbol. This somehow got missed out of the original patch.
Add this now.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
arch/arm/Kconfig | 1 +
1 file changed, 1 insertion(+)
(limited to 'arch/arm')
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 62079d4..b2d235d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -38,6 +38,7 @@ config ARM
select HAVE_GENERIC_HARDIRQS
select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
select HAVE_IDE if PCI || ISA || PCMCIA
+ select HAVE_IRQ_TIME_ACCOUNTING
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZMA
select HAVE_KERNEL_LZO
--
cgit v1.1
From 756b253167be36ea74980220d606662713431503 Mon Sep 17 00:00:00 2001
From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: Thu, 2 May 2013 19:56:12 +0100
Subject: ARM: 7711/1: dove: fix Dove cpu type from V7 to PJ4
The CPU used in Marvell Dove SoCs is a PJ4 Sheeva core. Using
CONFIG_CPU_PJ4 instead of CONFIG_CPU_V7 will enable iWMMXt
extensions on Dove.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
arch/arm/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'arch/arm')
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b2d235d..7e3e2bf 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -492,7 +492,7 @@ config ARCH_IXP4XX
config ARCH_DOVE
bool "Marvell Dove"
select ARCH_REQUIRE_GPIOLIB
- select CPU_V7
+ select CPU_PJ4
select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_PCI
select PINCTRL
--
cgit v1.1
From c01c5a506b59a8248b7666c779eb4ed689937874 Mon Sep 17 00:00:00 2001
From: Daniel Tang <dt.tangr@gmail.com>
Date: Fri, 3 May 2013 08:13:55 +0100
Subject: ARM: 7712/1: Remove trailing whitespace in arch/arm/Makefile
Clean up some trailing whitespace issues in arch/arm/Makefile.
Signed-off-by: Daniel Tang <dt.tangr@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
arch/arm/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'arch/arm')
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 4737408..1ba358b 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -309,7 +309,7 @@ define archhelp
echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
echo '* xipImage - XIP kernel image, if configured (arch/$(ARCH)/boot/xipImage)'
echo ' uImage - U-Boot wrapped zImage'
- echo ' bootpImage - Combined zImage and initial RAM disk'
+ echo ' bootpImage - Combined zImage and initial RAM disk'
echo ' (supply initrd image via make variable INITRD=<path>)'
echo '* dtbs - Build device tree blobs for enabled boards'
echo ' install - Install uncompressed kernel'
--
cgit v1.1
From 9e01573b5cf8b3188c1f33493d2e73a30e8d25fc Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nicolas.pitre@linaro.org>
Date: Thu, 9 May 2013 19:19:20 +0100
Subject: ARM: 7715/1: MCPM: adapt to GIC changes after upstream merge
Since commit c0114709ed85 ("irqchip: gic: Perform the gic_secondary_init()
call via CPU notifier") it is no longer required nor possible to call
gic_secondary_init() from platform code.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
arch/arm/common/mcpm_platsmp.c | 3 ---
1 file changed, 3 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/common/mcpm_platsmp.c b/arch/arm/common/mcpm_platsmp.c
index 52b88d8..3caed0d 100644
--- a/arch/arm/common/mcpm_platsmp.c
+++ b/arch/arm/common/mcpm_platsmp.c
@@ -15,8 +15,6 @@
#include <linux/smp.h>
#include <linux/spinlock.h>
-#include <linux/irqchip/arm-gic.h>
-
#include <asm/mcpm.h>
#include <asm/smp.h>
#include <asm/smp_plat.h>
@@ -49,7 +47,6 @@ static int __cpuinit mcpm_boot_secondary(unsigned int cpu, struct task_struct *i
static void __cpuinit mcpm_secondary_init(unsigned int cpu)
{
mcpm_cpu_powered_up();
- gic_secondary_init(0);
}
#ifdef CONFIG_HOTPLUG_CPU
--
cgit v1.1
From 72cd7447e72a13ce72d760b42ec295430f77300a Mon Sep 17 00:00:00 2001
From: Philipp Zabel <p.zabel@pengutronix.de>
Date: Wed, 17 Apr 2013 12:05:58 +0200
Subject: ARM i.MX6q: Fix periph_clk2_sel and periph2_clk2_sel clocks
The periph_clk2_sel mux can be set to pll3, osc/pll1_ref_clk, or osc/
pll2_burn_in_clk. The periph2_clk2_sel mux can be set to pll3 or pll2.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/mach-imx/clk-imx6q.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 1512590..ca17171 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -177,7 +177,8 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
static const char *step_sels[] = { "osc", "pll2_pfd2_396m", };
static const char *pll1_sw_sels[] = { "pll1_sys", "step", };
static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", };
-static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", };
+static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", };
+static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", };
static const char *periph_sels[] = { "periph_pre", "periph_clk2", };
static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", };
static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "pll3_pfd1_540m", };
@@ -369,8 +370,8 @@ int __init mx6q_clocks_init(void)
clk[pll1_sw] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels));
clk[periph_pre] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
clk[periph2_pre] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
- clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
- clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
+ clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
+ clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
clk[axi_sel] = imx_clk_mux("axi_sel", base + 0x14, 6, 2, axi_sels, ARRAY_SIZE(axi_sels));
clk[esai_sel] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels));
clk[asrc_sel] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels));
--
cgit v1.1
From 0e574461c4c915a065dd75c894edb653ce99be9c Mon Sep 17 00:00:00 2001
From: Dirk Behme <dirk.behme@gmail.com>
Date: Mon, 22 Apr 2013 08:00:34 +0200
Subject: ARM i.MX6: correct MLB clock configuration
According to the i.MX6 Dual/Quad technical reference manual
(Figure 18-2. Clock Tree - Part 1) the MLB clock is directly
feed by the AXI_CLK_ROOT. This is called 'axi' in our code.
Note that the clock of the MLB IP block on the i.MX6 is completely
independent of the PLL8 (MLB PLL). The MLB PLL isn't responsible
for feeding the MLB IP block with a clock. Instead, it's used
internally by the MLB module to sync the bus clock in case the MLB
6-pin interface is enabled:
MediaLB Control 0 Register, MLB150_MLBC0[5], MLBPEN:
1 MediaLB 6-pin interface enabled. MLB PLL and MLB PHY is enabled in this case.
I.e. the PLL8 MLB PLL has to be handled by the MLB driver and isn't needed
for clocking the MLB module itself.
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
CC: Jiada Wang <Jiada_Wang@mentor.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/mach-imx/clk-imx6q.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index ca17171..f2e1c62 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -499,7 +499,7 @@ int __init mx6q_clocks_init(void)
clk[ldb_di1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14);
clk[ipu2_di1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10);
clk[hsi_tx] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16);
- clk[mlb] = imx_clk_gate2("mlb", "pll8_mlb", base + 0x74, 18);
+ clk[mlb] = imx_clk_gate2("mlb", "axi", base + 0x74, 18);
clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20);
clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22);
clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28);
--
cgit v1.1
From 087bb28329f3ccda4e50cb4cf297542d7e773e20 Mon Sep 17 00:00:00 2001
From: Shawn Guo <shawn.guo@linaro.org>
Date: Tue, 16 Apr 2013 22:11:19 +0800
Subject: ARM: imx: replicate the diagnostic register of boot cpu into
secondary cores
The diagnostic register holds the errata bits. Mostly bootloader
does not bring up secondary cores, so that when errata bits are set
in bootloader, they are set only for boot cpu. But on a SMP
configuration, it should be equally done on every single core.
Set up the diagnostic register for secondary cores by replicating
the register from boot cpu.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
---
arch/arm/mach-imx/headsmp.S | 12 ++++++++++++
arch/arm/mach-imx/platsmp.c | 14 ++++++++++++++
2 files changed, 26 insertions(+)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S
index 67b9c48..627f16f 100644
--- a/arch/arm/mach-imx/headsmp.S
+++ b/arch/arm/mach-imx/headsmp.S
@@ -18,8 +18,20 @@
.section ".text.head", "ax"
#ifdef CONFIG_SMP
+diag_reg_offset:
+ .word g_diag_reg - .
+
+ .macro set_diag_reg
+ adr r0, diag_reg_offset
+ ldr r1, [r0]
+ add r1, r1, r0 @ r1 = physical &g_diag_reg
+ ldr r0, [r1]
+ mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register
+ .endm
+
ENTRY(v7_secondary_startup)
bl v7_invalidate_l1
+ set_diag_reg
b secondary_startup
ENDPROC(v7_secondary_startup)
#endif
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
index 4a69305..c6e1ab5 100644
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -12,6 +12,7 @@
#include <linux/init.h>
#include <linux/smp.h>
+#include <asm/cacheflush.h>
#include <asm/page.h>
#include <asm/smp_scu.h>
#include <asm/mach/map.h>
@@ -21,6 +22,7 @@
#define SCU_STANDBY_ENABLE (1 << 5)
+u32 g_diag_reg;
static void __iomem *scu_base;
static struct map_desc scu_io_desc __initdata = {
@@ -80,6 +82,18 @@ void imx_smp_prepare(void)
static void __init imx_smp_prepare_cpus(unsigned int max_cpus)
{
imx_smp_prepare();
+
+ /*
+ * The diagnostic register holds the errata bits. Mostly bootloader
+ * does not bring up secondary cores, so that when errata bits are set
+ * in bootloader, they are set only for boot cpu. But on a SMP
+ * configuration, it should be equally done on every single core.
+ * Read the register from boot cpu here, and will replicate it into
+ * secondary cores when booting them.
+ */
+ asm("mrc p15, 0, %0, c15, c0, 1" : "=r" (g_diag_reg) : : "cc");
+ __cpuc_flush_dcache_area(&g_diag_reg, sizeof(g_diag_reg));
+ outer_clean_range(__pa(&g_diag_reg), __pa(&g_diag_reg + 1));
}
struct smp_operations imx_smp_ops __initdata = {
--
cgit v1.1
From de78a23d73ba7f1d08f3e1aeaa0a03cb912c62a0 Mon Sep 17 00:00:00 2001
From: Shawn Guo <shawn.guo@linaro.org>
Date: Fri, 3 May 2013 10:55:46 +0800
Subject: ARM: imx: fix typo in gpu3d_shader_sels
There is no clock pll2_pfd9_720m. Instead it should be pll3_pfd0_720m.
Fix the typo in gpu3d_shader_sels.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
---
arch/arm/mach-imx/clk-imx6q.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index f2e1c62..dda9a2b 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -186,7 +186,7 @@ static const char *audio_sels[] = { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd
static const char *gpu_axi_sels[] = { "axi", "ahb", };
static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", };
static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
-static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", };
+static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll3_pfd0_720m", };
static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", };
static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
--
cgit v1.1
From d34c671debe3d327424a9951a5c3a81065d0474d Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Thu, 18 Apr 2013 22:44:29 +0200
Subject: ARM: sunxi: Fix Mini X-plus device tree build
Commit b00adbe0 ("ARM: sunxi: Rename uart nodes to serial") changed the
node names in the DTSI, changes that were not accordingly made to the
Mini X-Plus device tree. This breakage slipped through because it was
not properly declared in the Makefile.
Fix both issues.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/Makefile | 4 +++-
arch/arm/boot/dts/sun4i-a10-mini-xplus.dts | 4 ++--
2 files changed, 5 insertions(+), 3 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b9f7121..f0895c5 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -177,7 +177,9 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
spear320-evb.dtb \
spear320-hmi.dtb
dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
-dtb-$(CONFIG_ARCH_SUNXI) += sun4i-a10-cubieboard.dtb \
+dtb-$(CONFIG_ARCH_SUNXI) += \
+ sun4i-a10-cubieboard.dtb \
+ sun4i-a10-mini-xplus.dtb \
sun4i-a10-hackberry.dtb \
sun5i-a13-olinuxino.dtb
dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
index 4a7c35d..078ed7f 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -22,8 +22,8 @@
bootargs = "earlyprintk console=ttyS0,115200";
};
- soc {
- uart0: uart@01c28000 {
+ soc@01c20000 {
+ uart0: serial@01c28000 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
--
cgit v1.1
From be3cd268d1d1837aaed937c2fc85b3d39d2f1b50 Mon Sep 17 00:00:00 2001
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Tue, 9 Apr 2013 23:26:18 +0200
Subject: ARM: mvebu: do not duplicate the mpic alias
The mpic alias is already defined in the common armada-370-xp.dtsi, so
there's no need to repeat it at the armada-xp.dtsi and armada-370.dtsi
level.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
---
arch/arm/boot/dts/armada-370.dtsi | 2 +-
arch/arm/boot/dts/armada-xp.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index b2c1b5a..0c9130b 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -43,7 +43,7 @@
wt-override;
};
- mpic: interrupt-controller@20000 {
+ interrupt-controller@20000 {
reg = <0x20a00 0x1d0>, <0x21870 0x58>;
};
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index bacab11..5b902f9 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -31,7 +31,7 @@
wt-override;
};
- mpic: interrupt-controller@20000 {
+ interrupt-controller@20000 {
reg = <0x20a00 0x2d0>, <0x21070 0x58>;
};
--
cgit v1.1
From 99e11334dcb846f9b76fb808196c7f47aa83abb3 Mon Sep 17 00:00:00 2001
From: Martin Michlmayr <tbm@cyrius.com>
Date: Sun, 21 Apr 2013 17:14:00 +0100
Subject: Kirkwood: Enable PCIe port 1 on QNAP TS-11x/TS-21x
Enable KW_PCIE1 on QNAP TS-11x/TS-21x devices as newer revisions
(rev 1.3) have a USB 3.0 chip from Etron on PCIe port 1. Thanks
to Marek Vasut for identifying this issue!
Cc: <stable@vger.kernel.org> # v2.6.36.x
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Tested-by: Marek Vasut <marex@denx.de>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
---
arch/arm/mach-kirkwood/ts219-setup.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index 283abff..e1267d6 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -124,7 +124,7 @@ static void __init qnap_ts219_init(void)
static int __init ts219_pci_init(void)
{
if (machine_is_ts219())
- kirkwood_pcie_init(KW_PCIE0);
+ kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
return 0;
}
--
cgit v1.1
From 7c14068f5a08d57d5ea98ef3668218e654617095 Mon Sep 17 00:00:00 2001
From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: Fri, 10 May 2013 22:12:27 +0200
Subject: ARM: plat-orion: add missing ehci include to common.h
Removing orion ehci include from board files will raise a compiler
error because plat/common.h is using an enum provided by orion ehci
but not including the include itself. This just adds the missing include.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
---
arch/arm/plat-orion/include/plat/common.h | 1 +
1 file changed, 1 insertion(+)
(limited to 'arch/arm')
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h
index e06fc5f..d9a24f6 100644
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -10,6 +10,7 @@
#ifndef __PLAT_COMMON_H
#include <linux/mv643xx_eth.h>
+#include <linux/platform_data/usb-ehci-orion.h>
struct dsa_platform_data;
struct mv_sata_platform_data;
--
cgit v1.1
From 1aa3d8d9935dfb459d64f06ccd828b56147fd971 Mon Sep 17 00:00:00 2001
From: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Date: Wed, 8 May 2013 11:59:01 +0000
Subject: xen/arm: initialize pm functions later
If we are running in dom0, we have to wait for the arch specific code to
complete the initialization in order for us to successfully reset the
power_off and pm_restart functions.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
---
arch/arm/xen/enlighten.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
(limited to 'arch/arm')
diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
index d30042e..83d13b0 100644
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -272,12 +272,18 @@ static int __init xen_guest_init(void)
if (!xen_initial_domain())
xenbus_probe(NULL);
+ return 0;
+}
+core_initcall(xen_guest_init);
+
+static int __init xen_pm_init(void)
+{
pm_power_off = xen_power_off;
arm_pm_restart = xen_restart;
return 0;
}
-core_initcall(xen_guest_init);
+subsys_initcall(xen_pm_init);
static irqreturn_t xen_arm_callback(int irq, void *arg)
{
--
cgit v1.1
From d7266d7894b111dee9b081c05944533bc8780eca Mon Sep 17 00:00:00 2001
From: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Date: Wed, 8 May 2013 13:02:38 +0000
Subject: xen/arm: do not handle VCPUOP_register_vcpu_info failures
We expect VCPUOP_register_vcpu_info to succeed, do not try to handle
failures.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
---
arch/arm/xen/enlighten.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
index 83d13b0..3dfa2b5 100644
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -165,13 +165,9 @@ static int __init xen_secondary_init(unsigned int cpu)
info.offset = offset_in_page(vcpup);
err = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_info, cpu, &info);
- if (err) {
- pr_debug("register_vcpu_info failed: err=%d\n", err);
- } else {
- /* This cpu is using the registered vcpu info, even if
- later ones fail to. */
- per_cpu(xen_vcpu, cpu) = vcpup;
- }
+ BUG_ON(err);
+ per_cpu(xen_vcpu, cpu) = vcpup;
+
return 0;
}
--
cgit v1.1
From 3cc8e40e8ff8e232a9dd672da81beabd09f87366 Mon Sep 17 00:00:00 2001
From: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Date: Wed, 8 May 2013 11:59:01 +0000
Subject: xen/arm: rename xen_secondary_init and run it on every online cpu
Rename xen_secondary_init to xen_percpu_init.
Run xen_percpu_init on the each online cpu, reuse the current on_each_cpu call.
Merge xen_percpu_enable_events into xen_percpu_init.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
---
arch/arm/xen/enlighten.c | 15 ++++-----------
1 file changed, 4 insertions(+), 11 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
index 3dfa2b5..13609e0 100644
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -152,11 +152,12 @@ int xen_unmap_domain_mfn_range(struct vm_area_struct *vma,
}
EXPORT_SYMBOL_GPL(xen_unmap_domain_mfn_range);
-static int __init xen_secondary_init(unsigned int cpu)
+static void __init xen_percpu_init(void *unused)
{
struct vcpu_register_vcpu_info info;
struct vcpu_info *vcpup;
int err;
+ int cpu = get_cpu();
pr_info("Xen: initializing cpu%d\n", cpu);
vcpup = per_cpu_ptr(xen_vcpu_info, cpu);
@@ -168,7 +169,7 @@ static int __init xen_secondary_init(unsigned int cpu)
BUG_ON(err);
per_cpu(xen_vcpu, cpu) = vcpup;
- return 0;
+ enable_percpu_irq(xen_events_irq, 0);
}
static void xen_restart(char str, const char *cmd)
@@ -204,7 +205,6 @@ static int __init xen_guest_init(void)
const char *version = NULL;
const char *xen_prefix = "xen,xen-";
struct resource res;
- int i;
node = of_find_compatible_node(NULL, NULL, "xen,xen");
if (!node) {
@@ -261,8 +261,6 @@ static int __init xen_guest_init(void)
sizeof(struct vcpu_info));
if (xen_vcpu_info == NULL)
return -ENOMEM;
- for_each_online_cpu(i)
- xen_secondary_init(i);
gnttab_init();
if (!xen_initial_domain())
@@ -287,11 +285,6 @@ static irqreturn_t xen_arm_callback(int irq, void *arg)
return IRQ_HANDLED;
}
-static __init void xen_percpu_enable_events(void *unused)
-{
- enable_percpu_irq(xen_events_irq, 0);
-}
-
static int __init xen_init_events(void)
{
if (!xen_domain() || xen_events_irq < 0)
@@ -305,7 +298,7 @@ static int __init xen_init_events(void)
return -EINVAL;
}
- on_each_cpu(xen_percpu_enable_events, NULL, 0);
+ on_each_cpu(xen_percpu_init, NULL, 0);
return 0;
}
--
cgit v1.1
From 00ed4a0bd964555fe9276f2299564c384d50ae7d Mon Sep 17 00:00:00 2001
From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Date: Mon, 13 May 2013 12:22:53 -0300
Subject: ARM: mvebu: Add a ranges entry to translate devbus childs
With the latest device tree reorganization which introduced the
'internal-reg' node, now the only region translated is the internal register's.
This makes the description of the hardware incomplete, for it lacks the
Device Bus childs address space.
In order to fix this, it's required to add a 'ranges' entry with a suitable
address space to map Device Bus childs, on a per-board basis.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
---
arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 3 +++
1 file changed, 3 insertions(+)
(limited to 'arch/arm')
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index f14d36c..46b7850 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -27,6 +27,9 @@
};
soc {
+ ranges = <0 0 0xd0000000 0x100000
+ 0xf0000000 0 0xf0000000 0x8000000>;
+
internal-regs {
serial@12000 {
clock-frequency = <250000000>;
--
cgit v1.1
From 6d31727a0b6fe7206725c93508e6d2065f16ff03 Mon Sep 17 00:00:00 2001
From: Andrew Lunn <andrew@lunn.ch>
Date: Mon, 13 May 2013 19:32:14 +0000
Subject: ARM: Orion: Remove redundant init_dma_coherent_pool_size()
The patch:
387870f mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls
makes these calls on Kirkwood and Orion5x redundant. The drivers are
not making atomic requests for coherent memory and hence the default
pool size is now sufficient.
Jason Cooper added mach-mvebu/ hunk, and corrected minor typos in commit
message.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
---
arch/arm/mach-kirkwood/common.c | 6 ------
arch/arm/mach-mvebu/armada-370-xp.c | 7 -------
arch/arm/mach-orion5x/common.c | 7 -------
3 files changed, 20 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index c2cae69..f389228 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -528,12 +528,6 @@ void __init kirkwood_init_early(void)
{
orion_time_set_base(TIMER_VIRT_BASE);
- /*
- * Some Kirkwood devices allocate their coherent buffers from atomic
- * context. Increase size of atomic coherent pool to make sure such
- * the allocations won't fail.
- */
- init_dma_coherent_pool_size(SZ_1M);
mvebu_mbus_init("marvell,kirkwood-mbus",
BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ);
diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
index 42a4cb3..1c48890 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.c
+++ b/arch/arm/mach-mvebu/armada-370-xp.c
@@ -54,13 +54,6 @@ void __init armada_370_xp_init_early(void)
char *mbus_soc_name;
/*
- * Some Armada 370/XP devices allocate their coherent buffers
- * from atomic context. Increase size of atomic coherent pool
- * to make sure such the allocations won't fail.
- */
- init_dma_coherent_pool_size(SZ_1M);
-
- /*
* This initialization will be replaced by a DT-based
* initialization once the mvebu-mbus driver gains DT support.
*/
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index b97fd67..f8a6db9 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -199,13 +199,6 @@ void __init orion5x_init_early(void)
orion_time_set_base(TIMER_VIRT_BASE);
- /*
- * Some Orion5x devices allocate their coherent buffers from atomic
- * context. Increase size of atomic coherent pool to make sure such
- * the allocations won't fail.
- */
- init_dma_coherent_pool_size(SZ_1M);
-
/* Initialize the MBUS driver */
orion5x_pcie_id(&dev, &rev);
if (dev == MV88F5281_DEV_ID)
--
cgit v1.1
From 6eabb3301b1facee669d9938f7c5a0295c21d71d Mon Sep 17 00:00:00 2001
From: Jaccon Bastiaansen <jaccon.bastiaansen@gmail.com>
Date: Mon, 13 May 2013 17:28:27 +0100
Subject: ARM: 7720/1: ARM v6/v7 cmpxchg64 shouldn't clear upper 32 bits of the
old/new value
The implementation of cmpxchg64() for the ARM v6 and v7 architecture
casts parameter 2 and 3 (the old and new 64bit values) to an unsigned
long before calling the atomic_cmpxchg64() function. This clears
the top 32 bits of the old and new values, resulting in the wrong
values being compare-exchanged. Luckily, this only appears to be used
for 64-bit sched_clock, which we don't (yet) have on ARM.
This bug was introduced by commit 3e0f5a15f500 ("ARM: 7404/1: cmpxchg64:
use atomic64 and local64 routines for cmpxchg64").
Cc: <stable@vger.kernel.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jaccon Bastiaansen <jaccon.bastiaansen@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
arch/arm/include/asm/cmpxchg.h | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/include/asm/cmpxchg.h b/arch/arm/include/asm/cmpxchg.h
index 7eb18c1..4f009c1 100644
--- a/arch/arm/include/asm/cmpxchg.h
+++ b/arch/arm/include/asm/cmpxchg.h
@@ -233,15 +233,15 @@ static inline unsigned long __cmpxchg_local(volatile void *ptr,
((__typeof__(*(ptr)))atomic64_cmpxchg(container_of((ptr), \
atomic64_t, \
counter), \
- (unsigned long)(o), \
- (unsigned long)(n)))
+ (unsigned long long)(o), \
+ (unsigned long long)(n)))
#define cmpxchg64_local(ptr, o, n) \
((__typeof__(*(ptr)))local64_cmpxchg(container_of((ptr), \
local64_t, \
a), \
- (unsigned long)(o), \
- (unsigned long)(n)))
+ (unsigned long long)(o), \
+ (unsigned long long)(n)))
#endif /* __LINUX_ARM_ARCH__ >= 6 */
--
cgit v1.1
From 3210c05327e2b44b3bf96bab550d72cdb18b64e4 Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Wed, 8 May 2013 14:29:01 +0100
Subject: ARM: ux500: Remove duplicated assignment of ab8500_platdata
Since: "05ec260 mfd: db8500-prcmu: update resource passing", the AB8500's
platform data 'ab8500_platdata' is passed directly as an attribute to
'db8500_prcmu_pdata', so there's no requirement to assign it a second
time. In fact, it's only due to an ordering issue that the entire
'db8500_prcmu_pdata' data structure isn't completely over-written by the
assignment in u8500_init_devices().
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/mach-ux500/board-mop500.c | 6 +++---
arch/arm/mach-ux500/cpu-db8500.c | 4 +---
arch/arm/mach-ux500/setup.h | 2 +-
3 files changed, 5 insertions(+), 7 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 3cd555a..78389de 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -623,7 +623,7 @@ static void __init mop500_init_machine(void)
sdi0_reg_info.gpios[0].gpio = GPIO_SDMMC_1V8_3V_SEL;
mop500_pinmaps_init();
- parent = u8500_init_devices(&ab8500_platdata);
+ parent = u8500_init_devices();
for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
mop500_platform_devs[i]->dev.parent = parent;
@@ -660,7 +660,7 @@ static void __init snowball_init_machine(void)
sdi0_reg_info.gpios[0].gpio = SNOWBALL_SDMMC_1V8_3V_GPIO;
snowball_pinmaps_init();
- parent = u8500_init_devices(&ab8500_platdata);
+ parent = u8500_init_devices();
for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++)
snowball_platform_devs[i]->dev.parent = parent;
@@ -698,7 +698,7 @@ static void __init hrefv60_init_machine(void)
sdi0_reg_info.gpios[0].gpio = HREFV60_SDMMC_1V8_3V_GPIO;
hrefv60_pinmaps_init();
- parent = u8500_init_devices(&ab8500_platdata);
+ parent = u8500_init_devices();
for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
mop500_platform_devs[i]->dev.parent = parent;
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index e90b5ab..8894327 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -206,7 +206,7 @@ static struct device * __init db8500_soc_device_init(void)
/*
* This function is called from the board init
*/
-struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500)
+struct device * __init u8500_init_devices(void)
{
struct device *parent;
int i;
@@ -220,8 +220,6 @@ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500)
for (i = 0; i < ARRAY_SIZE(platform_devs); i++)
platform_devs[i]->dev.parent = parent;
- db8500_prcmu_device.dev.platform_data = ab8500;
-
platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
return parent;
diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h
index bddce2b..cad3ca8 100644
--- a/arch/arm/mach-ux500/setup.h
+++ b/arch/arm/mach-ux500/setup.h
@@ -18,7 +18,7 @@
void __init ux500_map_io(void);
extern void __init u8500_map_io(void);
-extern struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500);
+extern struct device * __init u8500_init_devices(void);
extern void __init ux500_init_irq(void);
extern void __init ux500_init_late(void);
--
cgit v1.1
From ea63a11027103372f56bd2d9ee3c525be6edc9c1 Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Wed, 8 May 2013 14:29:05 +0100
Subject: ARM: ux500: Fix incorrect DEBUG UART virtual addresses
A recent move to rid header files which were hindering multiplatform
support forced address allocations out of the headers and into the
files which were using them. We also lost some useful macros such as
IO_ADDRESS(), so physical -> virtual addressing has been carried out
manually in this case. Unfortunately the incorrect value was converted.
This patch rectifies the error and ensures earlyprintk works again.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/include/debug/ux500.S | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/include/debug/ux500.S b/arch/arm/include/debug/ux500.S
index 2848857..fbd24be 100644
--- a/arch/arm/include/debug/ux500.S
+++ b/arch/arm/include/debug/ux500.S
@@ -24,9 +24,9 @@
#define U8500_UART0_PHYS_BASE (0x80120000)
#define U8500_UART1_PHYS_BASE (0x80121000)
#define U8500_UART2_PHYS_BASE (0x80007000)
-#define U8500_UART0_VIRT_BASE (0xa8120000)
-#define U8500_UART1_VIRT_BASE (0xa8121000)
-#define U8500_UART2_VIRT_BASE (0xa8007000)
+#define U8500_UART0_VIRT_BASE (0xf8120000)
+#define U8500_UART1_VIRT_BASE (0xf8121000)
+#define U8500_UART2_VIRT_BASE (0xf8007000)
#define __UX500_PHYS_UART(n) U8500_UART##n##_PHYS_BASE
#define __UX500_VIRT_UART(n) U8500_UART##n##_VIRT_BASE
#endif
--
cgit v1.1
From 7d2b64f9832d7cb971141703219b3dc495bb9332 Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Wed, 8 May 2013 14:29:06 +0100
Subject: ARM: ux500: Provide device enumeration number suffix for SMSC911x
First Ethernet device has a ".0" appended onto the device name.
Since on a non-DT boot the ethernet will be named "smsc911x.0"
and since the clocks are not converted to device tree these
names need to be matched when providing the name from
auxdata.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[edited commit message]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/mach-ux500/cpu-db8500.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 8894327..46cca52 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -276,7 +276,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
&db8500_prcmu_pdata),
- OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x", NULL),
+ OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x.0", NULL),
/* Requires device name bindings. */
OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE,
"pinctrl-db8500", NULL),
--
cgit v1.1
From 9349d00fc3ff2b110dc07d9f5d06abfeac300c19 Mon Sep 17 00:00:00 2001
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Tue, 7 May 2013 22:06:57 +0200
Subject: ARM: at91/trivial: fix model name for SAM9X25-EK
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: stable <stable@vger.kernel.org> # 3.8+
---
arch/arm/boot/dts/at91sam9x25ek.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'arch/arm')
diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts
index 3b40d11..315250b 100644
--- a/arch/arm/boot/dts/at91sam9x25ek.dts
+++ b/arch/arm/boot/dts/at91sam9x25ek.dts
@@ -11,7 +11,7 @@
/include/ "at91sam9x5ek.dtsi"
/ {
- model = "Atmel AT91SAM9G25-EK";
+ model = "Atmel AT91SAM9X25-EK";
compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
ahb {
--
cgit v1.1
From 5ade7e4214b43e9b934202d892e3d7c131617908 Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Tue, 14 May 2013 15:14:49 +0200
Subject: ARM: at91/trivial: typo in GEM compatible string
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
arch/arm/boot/dts/sama5d3.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'arch/arm')
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 2e643ea..5fce96b 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -156,7 +156,7 @@
};
macb0: ethernet@f0028000 {
- compatible = "cnds,pc302-gem", "cdns,gem";
+ compatible = "cdns,pc302-gem", "cdns,gem";
reg = <0xf0028000 0x100>;
interrupts = <34 4 3>;
pinctrl-names = "default";
--
cgit v1.1
From 3f81127293284da449942a0144b9747c5db1e523 Mon Sep 17 00:00:00 2001
From: Ludovic Desroches <ludovic.desroches@atmel.com>
Date: Wed, 24 Apr 2013 15:56:48 +0200
Subject: ARM: at91: dts: request only spi cs-gpios used on sama5d3x cpu module
Instead of requesting all available spi cs-gpios, request only the ones used on
the board, in our case on the cpu module.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
arch/arm/boot/dts/sama5d3.dtsi | 10 ----------
arch/arm/boot/dts/sama5d3xcm.dtsi | 4 ++++
2 files changed, 4 insertions(+), 10 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 5fce96b..5000e0d 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -75,11 +75,6 @@
compatible = "atmel,at91sam9x5-spi";
reg = <0xf0004000 0x100>;
interrupts = <24 4 3>;
- cs-gpios = <&pioD 13 0
- &pioD 14 0 /* conflicts with SCK0 and CANRX0 */
- &pioD 15 0 /* conflicts with CTS0 and CANTX0 */
- &pioD 16 0 /* conflicts with RTS0 and PWMFI3 */
- >;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
status = "disabled";
@@ -203,11 +198,6 @@
compatible = "atmel,at91sam9x5-spi";
reg = <0xf8008000 0x100>;
interrupts = <25 4 3>;
- cs-gpios = <&pioC 25 0
- &pioC 26 0 /* conflitcs with TWD1 and ISI_D11 */
- &pioC 27 0 /* conflitcs with TWCK1 and ISI_D10 */
- &pioC 28 0 /* conflitcs with PWMFI0 and ISI_D9 */
- >;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
status = "disabled";
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi
index 1f8ed40..b336e77 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -32,6 +32,10 @@
ahb {
apb {
+ spi0: spi@f0004000 {
+ cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
+ };
+
macb0: ethernet@f0028000 {
phy-mode = "rgmii";
};
--
cgit v1.1
From 19a280a61b520febab0f2fde94f4bd50250377b2 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Sun, 12 May 2013 15:06:51 +0200
Subject: ARM: sunxi: select ARCH_REQUIRE_GPIOLIB
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
CONFIG_ARCH_SUNXI currently doesn't enable a gpiolib, which causes build
problems when building a kernel with only the sunxi platform enabled.
Select ARCH_REQUIRE_GPIOLIB to solve this.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Emilio López <emilio@elopez.com.ar>
---
arch/arm/mach-sunxi/Kconfig | 1 +
1 file changed, 1 insertion(+)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index d259c78..5b045e3 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -1,5 +1,6 @@
config ARCH_SUNXI
bool "Allwinner A1X SOCs" if ARCH_MULTI_V7
+ select ARCH_REQUIRE_GPIOLIB
select CLKSRC_MMIO
select CLKSRC_OF
select COMMON_CLK
--
cgit v1.1
From b7a8ca5173ef9aa55fa039d7c216426ff0b25a12 Mon Sep 17 00:00:00 2001
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Wed, 15 May 2013 12:12:33 +0200
Subject: ARM: at91: rm9200 fix time support
since commit 838a2ae80a6ab52139fb1bf0a93ea8c5eff94488
Author: Shawn Guo <shawn.guo@linaro.org>
Date: Sat Jan 12 11:50:05 2013 +0000
ARM: use clockevents_config_and_register() where possible
The timer is wrongly configured and result in a nice crash
so revert it on rm9200 timer.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: stable <stable@vger.kernel.org> # 3.8+
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
arch/arm/mach-at91/at91rm9200_time.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index 2acdff4..180b302 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -174,6 +174,7 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
static struct clock_event_device clkevt = {
.name = "at91_tick",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32,
.rating = 150,
.set_next_event = clkevt32k_next_event,
.set_mode = clkevt32k_mode,
@@ -264,9 +265,11 @@ void __init at91rm9200_timer_init(void)
at91_st_write(AT91_ST_RTMR, 1);
/* Setup timer clockevent, with minimum of two ticks (important!!) */
+ clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift);
+ clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt);
+ clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1;
clkevt.cpumask = cpumask_of(0);
- clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK,
- 2, AT91_ST_ALMV);
+ clockevents_register_device(&clkevt);
/* register clocksource */
clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);
--
cgit v1.1
From 74ba4ec7a2036f9dbe5fcc85c7c737222005507f Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar>
Date: Wed, 15 May 2013 09:36:41 -0300
Subject: ARM: ux500: select REGULATOR
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
MACH_MOP500 selects REGULATOR_FIXED_VOLTAGE but not REGULATOR. This
patch makes it select the latter too.
Seen as:
warning: (MACH_DOVE_DT && ARCH_KIRKWOOD_DT && MACH_AMS_DELTA &&
MACH_MOP500 && TPS6105X) selects REGULATOR_FIXED_VOLTAGE which has
unmet direct dependencies (REGULATOR)
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/mach-ux500/Kconfig | 1 +
1 file changed, 1 insertion(+)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 6a4387e..b19b072 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -51,6 +51,7 @@ config MACH_MOP500
bool "U8500 Development platform, MOP500 versions"
select I2C
select I2C_NOMADIK
+ select REGULATOR
select REGULATOR_FIXED_VOLTAGE
select SOC_BUS
select UX500_SOC_DB8500
--
cgit v1.1
From 98f541c6e390d48643047e0924da8ccc10bb1598 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Wed, 1 May 2013 12:13:54 -0400
Subject: USB: remove remaining instances of USB_SUSPEND
Commit 84ebc10294a3d7be4c66f51070b7aedbaa24de9b (USB: remove
CONFIG_USB_SUSPEND option) failed to remove all of the usages of
USB_SUSPEND throughout the kernel. This patch (as1677) removes the
remaining instances of that symbol.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/configs/omap1_defconfig | 1 -
arch/arm/configs/omap2plus_defconfig | 1 -
2 files changed, 2 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index 7e0ebb6..9940f7b 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -199,7 +199,6 @@ CONFIG_USB_PHY=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_SUSPEND=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index c1ef64b..435d69b 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -204,7 +204,6 @@ CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_SUSPEND=y
CONFIG_USB_MON=y
CONFIG_USB_WDM=y
CONFIG_USB_STORAGE=y
--
cgit v1.1
From 304e71e0ad4125c29a0731491b75c3b83530d616 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Tue, 14 May 2013 20:28:15 -0700
Subject: ARM: dts: Fix musb interrupt for device tree booting
Commit ad871c10 (ARM: dts: OMAP: Add usb_otg and glue data to
OMAP3+ boards) added support for MUSB on omap3 for device tree,
but added the interrupts the wrong way probably as they were
copied from the omap4.dtsi file. On omap3 we have TI specific
interrupt controller, not GIC.
Fix this by specifying the interrupt following the TI INTC
binding.
Without this fix MUSB won't work as it is trying to use
irq0 instead of irq92.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/omap3.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'arch/arm')
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 82a404d..99ba6e1 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -516,7 +516,7 @@
usb_otg_hs: usb_otg_hs@480ab000 {
compatible = "ti,omap3-musb";
reg = <0x480ab000 0x1000>;
- interrupts = <0 92 0x4>, <0 93 0x4>;
+ interrupts = <92>, <93>;
interrupt-names = "mc", "dma";
ti,hwmods = "usb_otg_hs";
multipoint = <1>;
--
cgit v1.1
From 0f497039276fa2ca2ca324236848bb15c8c775dc Mon Sep 17 00:00:00 2001
From: jean-philippe francois <jp.francois@cynove.com>
Date: Thu, 16 May 2013 11:25:07 -0700
Subject: ARM: OMAP: fix __init section mismatch for _enable_preprogram
_enable_preprogram is marked as __init, but is called from _enable
which is not. Without this patch, the board oopses after init. Tested
on custom hardware and on beagle board xM. Otherwise we can get:
Unable to handle kernel paging request at virtual address 000b0012
pgd = cf968000
*pgd=8fb06831, *pte=00000000, *ppte=00000000
PREEMPT ARM
Modules linked in:
CPU: 0 Not tainted (3.9.0 #2)
PC is at _enable_preprogram+0x1c/0x24
LR is at omap_hwmod_enable+0x34/0x60
psr: 80000093
sp : cf95de08 ip : 00002de5 fp : bec33d4c
r10: 00000000 r9 : 00000002 r8 : b6dd2c78
r7 : 00000004 r6 : 00000000 r5 : a0000013 r4 : cf95c000
r3 : 00000000 r2 : b6dd2c7c r1 : 00000000 r0 : 000b0012
Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user
Control: 10c5387d Table: 8f968019 DAC: 00000015
Process otpcmd (pid: 607, stack limit = 0xcf95c230)
Stack: (0xcf95de08 to 0xcf95e000)
de00: 00000001 cf91f840 00000000 c001d6fc 00000002 cf91f840
de20: cf8f7e10 c001de54 cf8f7e10 c001de78 c001de68 c01d5e80 00000000 cf8f7e10
de40: cf8f7e10 c01d5f28 cf8f7e10 c0530d30 00000000 c01d6f28 00000000 c0088664
de60: b6ea1000 cfb05284 cf95c000 00000001 cf95c000 60000013 00000001 cf95dee4
de80: cf870050 c01d7308 cf870010 cf870050 00000001 c0278b14 c0526f28 00000000
dea0: cf870050 ffff8e18 00000001 cf95dee4 00000000 c0274f7c cf870050 00000001
dec0: cf95dee4 cf1d8484 000000e0 c0276464 00000008 cf9c0000 00000007 c0276980
dee0: cf9c0000 00000064 00000008 cf1d8404 cf1d8400 c01cc05c 0000270a cf1d8504
df00: 00000023 cf1d8484 00000007 c01cc670 00000bdd 00000001 00000000 cf449e60
df20: cf1dde70 cf1d8400 bec33d18 cf1d8504 c0246f00 00000003 cf95c000 00000000
df40: bec33d4c c01cd078 00000003 cf1d8504 00000081 c01cbcb8 bec33d18 00000003
df60: bec33d18 c00a9034 00002000 c00a9c68 cf92fe00 00000003 c0246f00 cf92fe00
df80: 00000000 c00a9cb0 00000003 00000000 00008e70 00000000 b6f17000 00000036
dfa0: c000e484 c000e300 00008e70 00000000 00000003 c0246f00 bec33d18 bec33d18
dfc0: 00008e70 00000000 b6f17000 00000036 00000000 00000000 b6f6d000 bec33d4c
dfe0: b6ea1bd0 bec33d0c 00008c9c b6ea1bdc 60000010 00000003 00000000 00000000
(_omap_device_enable_hwmods+0x20/0x34)
(omap_device_enable+0x3c/0x50)
(_od_runtime_resume+0x10/0x1c)
(__rpm_callback+0x54/0x98)
(rpm_callback+0x64/0x7c)
(rpm_resume+0x434/0x554)
(__pm_runtime_resume+0x48/0x74)
(omap_i2c_xfer+0x28/0xe8)
(__i2c_transfer+0x3c/0x78)
(i2c_transfer+0x6c/0xc0)
(i2c_master_send+0x38/0x48)
(sha204p_send_command+0x60/0x9c)
(sha204c_send_and_receive+0x5c/0x1e0)
(sha204m_read+0x94/0xa0)
(otp_do_read+0x50/0xa4)
(vfs_ioctl+0x24/0x40)
(do_vfs_ioctl+0x1b0/0x1c0)
(sys_ioctl+0x38/0x54)
(ret_fast_syscall+0x0/0x30)
Code: e1a08002 ea000009 e598003c e592c05c (e7904003)
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Philippe Fran=C3=A7ois <jp.francois@cynove.com>
Acked-by: Kevin Hilman <khilman@linaro.org>
[tony@atomide.com: updated description with oops]
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/omap_hwmod.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index d25a95f..e328988 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -2065,7 +2065,7 @@ static int _omap4_get_context_lost(struct omap_hwmod *oh)
* do so is present in the hwmod data, then call it and pass along the
* return value; otherwise, return 0.
*/
-static int __init _enable_preprogram(struct omap_hwmod *oh)
+static int _enable_preprogram(struct omap_hwmod *oh)
{
if (!oh->class->enable_preprogram)
return 0;
--
cgit v1.1
From a8b09c52a66e801d87704cfebf57958b1991ab86 Mon Sep 17 00:00:00 2001
From: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Date: Thu, 16 May 2013 11:25:07 -0700
Subject: ARM: OMAP: fix error return code in omap1_system_dma_init()
Fix to return -ENOMEM in the d->chan alloc error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap1/dma.c | 1 +
1 file changed, 1 insertion(+)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index 68ab858..a94b3a7 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -345,6 +345,7 @@ static int __init omap1_system_dma_init(void)
dev_err(&pdev->dev,
"%s: Memory allocation failed for d->chan!\n",
__func__);
+ ret = -ENOMEM;
goto exit_release_d;
}
--
cgit v1.1
From a545ec160afea245939290e7f616f68de906a85c Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Thu, 16 May 2013 11:25:07 -0700
Subject: ARM: OMAP2+: Add missing CONFIG_ARCH_MULTI_V6=y to
omap2plus_defconfig
omap2plus_defconfig is missing CONFIG_ARCH_MULTI_V6. This results in
undefined instruction traps in u-boot (and boot failures) on OMAP2xxx
SoCs, which are ARM11-based. Fix by setting CONFIG_ARCH_MULTI_V6.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/configs/omap2plus_defconfig | 1 +
1 file changed, 1 insertion(+)
(limited to 'arch/arm')
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index c1ef64b..f590902 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -20,6 +20,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MULTI_V6=y
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_OMAP_RESET_CLOCKS=y
CONFIG_OMAP_MUX_DEBUG=y
--
cgit v1.1
From c6c003af0b91bb8722dbf2a8683cd40532e12079 Mon Sep 17 00:00:00 2001
From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Date: Fri, 17 May 2013 08:09:57 -0300
Subject: ARM: mvebu: Fix ranges entry on XP GP board
With the latest device tree reorganization which introduced the
'internal-reg' node, now the only region translated is the internal register's.
This makes the description of the hardware incomplete, for it lacks the
Device Bus childs address space.
In order to fix this, it's required to add a 'ranges' entry with a suitable
address space to map Device Bus childs, on a per-board basis.
This patch fixes the ranges property on the Armada XP GP board.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
---
arch/arm/boot/dts/armada-xp-gp.dts | 3 +++
1 file changed, 3 insertions(+)
(limited to 'arch/arm')
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 26ad06f..3ee63d1 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -39,6 +39,9 @@
};
soc {
+ ranges = <0 0 0xd0000000 0x100000
+ 0xf0000000 0 0xf0000000 0x1000000>;
+
internal-regs {
serial@12000 {
clock-frequency = <250000000>;
--
cgit v1.1
From a6d25f4c951b8b28f2eaec6f891ff834622532f2 Mon Sep 17 00:00:00 2001
From: Vaibhav Hiremath <hvaibhav@ti.com>
Date: Wed, 27 Mar 2013 15:34:26 +0530
Subject: ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock
It is required to enable respective clock-domain before
enabling any clock/module inside that clock-domain.
During common-clock migration, .clkdm_name field got missed
for "clkdiv32k_ick" clock, which leaves "clk_24mhz_clkdm"
unused; so it will be disabled even if childs of this clock-domain
is enabled, which keeps child modules in idle mode.
This fixes the kernel crash observed on AM335xEVM-SK platform,
where clkdiv32_ick clock is being used as a gpio debounce clock
and since clkdiv32k_ick is in idle mode it leads to below crash -
Crash Log:
==========
[ 2.598347] Unhandled fault: external abort on non-linefetch (0x1028) at
0xfa1ac150
[ 2.606434] Internal error: : 1028 [#1] SMP ARM
[ 2.611207] Modules linked in:
[ 2.614449] CPU: 0 Not tainted (3.8.4-01382-g1f449cd-dirty #4)
[ 2.620973] PC is at _set_gpio_debounce+0x60/0x104
[ 2.626025] LR is at clk_enable+0x30/0x3c
Cc: stable@vger.kernel.org # v3.9
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/cclock33xx_data.c | 26 +++++++++++++++++++++++---
1 file changed, 23 insertions(+), 3 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-omap2/cclock33xx_data.c b/arch/arm/mach-omap2/cclock33xx_data.c
index 6ebc780..af3544c 100644
--- a/arch/arm/mach-omap2/cclock33xx_data.c
+++ b/arch/arm/mach-omap2/cclock33xx_data.c
@@ -454,9 +454,29 @@ DEFINE_CLK_GATE(cefuse_fck, "sys_clkin_ck", &sys_clkin_ck, 0x0,
*/
DEFINE_CLK_FIXED_FACTOR(clkdiv32k_ck, "clk_24mhz", &clk_24mhz, 0x0, 1, 732);
-DEFINE_CLK_GATE(clkdiv32k_ick, "clkdiv32k_ck", &clkdiv32k_ck, 0x0,
- AM33XX_CM_PER_CLKDIV32K_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT,
- 0x0, NULL);
+static struct clk clkdiv32k_ick;
+
+static const char *clkdiv32k_ick_parent_names[] = {
+ "clkdiv32k_ck",
+};
+
+static const struct clk_ops clkdiv32k_ick_ops = {
+ .enable = &omap2_dflt_clk_enable,
+ .disable = &omap2_dflt_clk_disable,
+ .is_enabled = &omap2_dflt_clk_is_enabled,
+ .init = &omap2_init_clk_clkdm,
+};
+
+static struct clk_hw_omap clkdiv32k_ick_hw = {
+ .hw = {
+ .clk = &clkdiv32k_ick,
+ },
+ .enable_reg = AM33XX_CM_PER_CLKDIV32K_CLKCTRL,
+ .enable_bit = AM33XX_MODULEMODE_SWCTRL_SHIFT,
+ .clkdm_name = "clk_24mhz_clkdm",
+};
+
+DEFINE_STRUCT_CLK(clkdiv32k_ick, clkdiv32k_ick_parent_names, clkdiv32k_ick_ops);
/* "usbotg_fck" is an additional clock and not really a modulemode */
DEFINE_CLK_GATE(usbotg_fck, "dpll_per_ck", &dpll_per_ck, 0x0,
--
cgit v1.1
From d7fc0dde96248c0d90e02bc95dc5c003ece84982 Mon Sep 17 00:00:00 2001
From: Wolfram Sang <wsa@the-dreams.de>
Date: Sun, 12 May 2013 15:19:55 +0200
Subject: arch/arm/mach-tegra: don't check resource with devm_ioremap_resource
devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Stephen Warren <swarren@nvidia.com>
---
arch/arm/mach-tegra/tegra2_emc.c | 5 -----
1 file changed, 5 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-tegra/tegra2_emc.c b/arch/arm/mach-tegra/tegra2_emc.c
index 9e8bdfa..31e69a0 100644
--- a/arch/arm/mach-tegra/tegra2_emc.c
+++ b/arch/arm/mach-tegra/tegra2_emc.c
@@ -307,11 +307,6 @@ static int tegra_emc_probe(struct platform_device *pdev)
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "missing register base\n");
- return -ENOMEM;
- }
-
emc_regbase = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(emc_regbase))
return PTR_ERR(emc_regbase);
--
cgit v1.1
From c818b58e63f1d9fe1c070f0e578ef5168de35312 Mon Sep 17 00:00:00 2001
From: Wolfram Sang <wsa@the-dreams.de>
Date: Sun, 12 May 2013 15:19:55 +0200
Subject: arch/arm/plat-samsung: don't check resource with
devm_ioremap_resource
devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
---
arch/arm/plat-samsung/adc.c | 5 -----
1 file changed, 5 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c
index ca07cb1..79690f2 100644
--- a/arch/arm/plat-samsung/adc.c
+++ b/arch/arm/plat-samsung/adc.c
@@ -381,11 +381,6 @@ static int s3c_adc_probe(struct platform_device *pdev)
}
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!regs) {
- dev_err(dev, "failed to find registers\n");
- return -ENXIO;
- }
-
adc->regs = devm_ioremap_resource(dev, regs);
if (IS_ERR(adc->regs))
return PTR_ERR(adc->regs);
--
cgit v1.1
From c689cbac25b4fce2f3d7de2e4dd6678caeebdcb8 Mon Sep 17 00:00:00 2001
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
Date: Fri, 17 May 2013 14:25:03 +0200
Subject: ARM: mvebu: select ARCH_REQUIRE_GPIOLIB for mvebu platform
Initially ARCH_REQUIRE_GPIOLIB was part of Thomas Petazzoni series
when he introduced the gpiolib support for mvebu:
93a59cf arm: mvebu: use GPIO support now that a driver is available
This commit was written to be applied for the ARCH_MVEBU which was
located in arch/arm/KConfig and was merged in 3.7.
In the same time Rob Herring moved the ARCH_MVEBU block to
arch/arm/mach-mvebu/Kconfig with this commit and also merged in 3.7:
387798b ARM: initial multiplatform support
Unfortunately the ARCH_REQUIRE_GPIOLIB have been lost during this
migration. This was not noticed until the v3.10-rc1, because mvebu as
part of ARCH_MULTIPLATFORM was always selected with ARCH_VEXPRESS, and
this architect selected ARCH_REQUIRE_GPIOLIB.
Since the following commit from Arnd: "883a106 ARM: default machine
descriptor for multiplatform", ARCH_VEXPRESS was then no more selected
by default with ARCH_MVEBU and it made appeared the lack of
ARCH_REQUIRE_GPIOLIB for mvebu. This commit added back the selection
of ARCH_REQUIRE_GPIOLIB for ARCH_MVEBU.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
---
arch/arm/mach-mvebu/Kconfig | 1 +
1 file changed, 1 insertion(+)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index e11acbb..80a8bca 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -15,6 +15,7 @@ config ARCH_MVEBU
select MVEBU_CLK_GATING
select MVEBU_MBUS
select ZONE_DMA if ARM_LPAE
+ select ARCH_REQUIRE_GPIOLIB
if ARCH_MVEBU
--
cgit v1.1
From 8eed481e6fe2c28c2a579ada0c8ba5cbad45bf2c Mon Sep 17 00:00:00 2001
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Thu, 16 May 2013 17:55:16 +0200
Subject: arm: mvebu: fix the 'ranges' property to handle PCIe
Since 82a682676 ('ARM: dts: mvebu: Convert all the mvebu files to use
the range property') all the device nodes of Armada 370/XP are under a
common 'ranges' property that translates the device register addresses
into their absolute address, thanks to the base address of the
internal register space.
However, beyond just the register areas, there are also PCIe I/O and
memory regions, whose addresses should be properly translated. This
patch fixes the Armada 370 and XP ranges property to take PCIe into
account properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
---
arch/arm/boot/dts/armada-370-xp.dtsi | 3 ++-
arch/arm/boot/dts/armada-370.dtsi | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 272bbc6..550eb77 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -33,7 +33,8 @@
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&mpic>;
- ranges = <0 0 0xd0000000 0x100000>;
+ ranges = <0 0 0xd0000000 0x0100000 /* internal registers */
+ 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */>;
internal-regs {
compatible = "simple-bus";
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 0c9130b..a1a8703 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -29,7 +29,8 @@
};
soc {
- ranges = <0 0xd0000000 0x100000>;
+ ranges = <0 0xd0000000 0x0100000 /* internal registers */
+ 0xe0000000 0xe0000000 0x8100000 /* PCIe */>;
internal-regs {
system-controller@18200 {
compatible = "marvell,armada-370-xp-system-controller";
--
cgit v1.1
From 35513171eed4d7245e81d926d311e74f3dca06f3 Mon Sep 17 00:00:00 2001
From: Rajendra Nayak <rnayak@ti.com>
Date: Wed, 15 May 2013 20:18:37 +0530
Subject: ARM: OMAP2+: hwmod: Fix sidle programming in
_enable_sysc()/_idle_sysc()
_enable_sysc() and _idle_sysc() handle the midle mode programming correctly
and program HWMOD_IDLEMODE_SMART or HWMOD_IDLEMODE_SMART_WKUP respectively
for supported IPs (The ones which support hardware controlled midle modes)
However the same programming logic is missing when it comes to sidle mode
programming. Here they seem to just set HWMOD_IDLEMODE_SMART (Again for the
ones which support hardware controlled sidle modes)
This problem was hidden due to the fact that a call to _enable_wakeup()
in those same functions would overwrite the idlemodes and program them
correctly (to HWMOD_IDLEMODE_SMART_WKUP in the supported cases)
So fix the sidlemode handling correctly in these functions and handle the
_enable_wakeup() for SIDLEMODE supported IPs same as the way its handled
for MIDLEMODE supported ones.
Tested-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Tested-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org> # OMAP4/Panda
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/omap_hwmod.c | 42 ++++++++++++++++++++++++----------------
1 file changed, 25 insertions(+), 17 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index d25a95f..c28552b 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1356,13 +1356,26 @@ static void _enable_sysc(struct omap_hwmod *oh)
clkdm = _get_clkdm(oh);
if (sf & SYSC_HAS_SIDLEMODE) {
+ if (oh->flags & HWMOD_SWSUP_SIDLE) {
+ idlemode = HWMOD_IDLEMODE_NO;
+ } else {
+ if (sf & SYSC_HAS_ENAWAKEUP)
+ _enable_wakeup(oh, &v);
+ if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
+ idlemode = HWMOD_IDLEMODE_SMART_WKUP;
+ else
+ idlemode = HWMOD_IDLEMODE_SMART;
+ }
+
+ /*
+ * This is special handling for some IPs like
+ * 32k sync timer. Force them to idle!
+ */
clkdm_act = (clkdm && clkdm->flags & CLKDM_ACTIVE_WITH_MPU);
if (clkdm_act && !(oh->class->sysc->idlemodes &
(SIDLE_SMART | SIDLE_SMART_WKUP)))
idlemode = HWMOD_IDLEMODE_FORCE;
- else
- idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
- HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
+
_set_slave_idlemode(oh, idlemode, &v);
}
@@ -1391,10 +1404,6 @@ static void _enable_sysc(struct omap_hwmod *oh)
(sf & SYSC_HAS_CLOCKACTIVITY))
_set_clockactivity(oh, oh->class->sysc->clockact, &v);
- /* If slave is in SMARTIDLE, also enable wakeup */
- if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE))
- _enable_wakeup(oh, &v);
-
_write_sysconfig(v, oh);
/*
@@ -1430,13 +1439,16 @@ static void _idle_sysc(struct omap_hwmod *oh)
sf = oh->class->sysc->sysc_flags;
if (sf & SYSC_HAS_SIDLEMODE) {
- /* XXX What about HWMOD_IDLEMODE_SMART_WKUP? */
- if (oh->flags & HWMOD_SWSUP_SIDLE ||
- !(oh->class->sysc->idlemodes &
- (SIDLE_SMART | SIDLE_SMART_WKUP)))
+ if (oh->flags & HWMOD_SWSUP_SIDLE) {
idlemode = HWMOD_IDLEMODE_FORCE;
- else
- idlemode = HWMOD_IDLEMODE_SMART;
+ } else {
+ if (sf & SYSC_HAS_ENAWAKEUP)
+ _enable_wakeup(oh, &v);
+ if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
+ idlemode = HWMOD_IDLEMODE_SMART_WKUP;
+ else
+ idlemode = HWMOD_IDLEMODE_SMART;
+ }
_set_slave_idlemode(oh, idlemode, &v);
}
@@ -1455,10 +1467,6 @@ static void _idle_sysc(struct omap_hwmod *oh)
_set_master_standbymode(oh, idlemode, &v);
}
- /* If slave is in SMARTIDLE, also enable wakeup */
- if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE))
- _enable_wakeup(oh, &v);
-
_write_sysconfig(v, oh);
}
--
cgit v1.1
From ca43ea345de96dc214be790b6cebedbdfe110b63 Mon Sep 17 00:00:00 2001
From: Rajendra Nayak <rnayak@ti.com>
Date: Wed, 15 May 2013 20:18:38 +0530
Subject: ARM: OMAP2+: hwmod: Add a new flag to handle SIDLE in SWSUP only in
active
Some IPs (like UART) need the sidle mode to be controlled in SW only
while they are active. Once they go inactive, they need the IP to be
put back in HW control so they are also wakeup capable.
The flag HWMOD_SWSUP_SIDLE takes care of IPs which need the sidle
mode to be *always* controlled in SWSUP. We now have a need to control
IPs sidle mode in SWSUP only while its active.
So define a new flag 'HWMOD_SWSUP_SIDLE_ACT' to help the framework
know about these new IP requirements.
Tested-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Tested-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org> # OMAP4/Panda
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/omap_hwmod.c | 3 ++-
arch/arm/mach-omap2/omap_hwmod.h | 4 ++++
2 files changed, 6 insertions(+), 1 deletion(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index c28552b..5739429 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1356,7 +1356,8 @@ static void _enable_sysc(struct omap_hwmod *oh)
clkdm = _get_clkdm(oh);
if (sf & SYSC_HAS_SIDLEMODE) {
- if (oh->flags & HWMOD_SWSUP_SIDLE) {
+ if (oh->flags & HWMOD_SWSUP_SIDLE ||
+ oh->flags & HWMOD_SWSUP_SIDLE_ACT) {
idlemode = HWMOD_IDLEMODE_NO;
} else {
if (sf & SYSC_HAS_ENAWAKEUP)
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index fe59629..8498774 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -463,6 +463,9 @@ struct omap_hwmod_omap4_prcm {
* is kept in force-standby mode. Failing to do so causes PM problems
* with musb on OMAP3630 at least. Note that musb has a dedicated register
* to control MSTANDBY signal when MIDLEMODE is set to force-standby.
+ * HWMOD_SWSUP_SIDLE_ACT: omap_hwmod code should manually bring the module
+ * out of idle, but rely on smart-idle to the put it back in idle,
+ * so the wakeups are still functional (Only known case for now is UART)
*/
#define HWMOD_SWSUP_SIDLE (1 << 0)
#define HWMOD_SWSUP_MSTANDBY (1 << 1)
@@ -476,6 +479,7 @@ struct omap_hwmod_omap4_prcm {
#define HWMOD_EXT_OPT_MAIN_CLK (1 << 9)
#define HWMOD_BLOCK_WFI (1 << 10)
#define HWMOD_FORCE_MSTANDBY (1 << 11)
+#define HWMOD_SWSUP_SIDLE_ACT (1 << 12)
/*
* omap_hwmod._int_flags definitions
--
cgit v1.1
From 66dde54e978a310c57a40023ff39835fa5ccd7a3 Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Wed, 15 May 2013 20:18:39 +0530
Subject: ARM: OMAP2+: hwmod-data: UART IP needs software control to manage
sidle modes
OMAP UART IP needs software control for slave idle modes based on functional
state of the IP. i.e The IP slave idle settings should be set to 'noidle' when
being used and then put back to 'smart_idle' when unused. Currently this is
handled by the driver with function pointers implemented in platform code.
This however breaks in case of device tree because of missing idle handling
APIs.
Previous patches in this series added a flag HWMOD_SWSUP_SIDLE_ACTIVE which
takes care of the mentioned requirement. Hence add the flag for all UART IPs
to take advantage of feature supported by framework.
Subsequent patches removes the slave idle handling from driver code.
Tested-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Tested-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org> # OMAP4/Panda
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 3 +++
arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 6 ++++++
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 4 ++++
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 6 +++++-
4 files changed, 18 insertions(+), 1 deletion(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index c8c64b3..d05fc7b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -512,6 +512,7 @@ struct omap_hwmod omap2xxx_uart1_hwmod = {
.mpu_irqs = omap2_uart1_mpu_irqs,
.sdma_reqs = omap2_uart1_sdma_reqs,
.main_clk = "uart1_fck",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
@@ -531,6 +532,7 @@ struct omap_hwmod omap2xxx_uart2_hwmod = {
.mpu_irqs = omap2_uart2_mpu_irqs,
.sdma_reqs = omap2_uart2_sdma_reqs,
.main_clk = "uart2_fck",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
@@ -550,6 +552,7 @@ struct omap_hwmod omap2xxx_uart3_hwmod = {
.mpu_irqs = omap2_uart3_mpu_irqs,
.sdma_reqs = omap2_uart3_sdma_reqs,
.main_clk = "uart3_fck",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 01d8f32..075f7cc 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -1995,6 +1995,7 @@ static struct omap_hwmod am33xx_uart1_hwmod = {
.name = "uart1",
.class = &uart_class,
.clkdm_name = "l4_wkup_clkdm",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = am33xx_uart1_irqs,
.sdma_reqs = uart1_edma_reqs,
.main_clk = "dpll_per_m2_div4_wkupdm_ck",
@@ -2015,6 +2016,7 @@ static struct omap_hwmod am33xx_uart2_hwmod = {
.name = "uart2",
.class = &uart_class,
.clkdm_name = "l4ls_clkdm",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = am33xx_uart2_irqs,
.sdma_reqs = uart1_edma_reqs,
.main_clk = "dpll_per_m2_div4_ck",
@@ -2042,6 +2044,7 @@ static struct omap_hwmod am33xx_uart3_hwmod = {
.name = "uart3",
.class = &uart_class,
.clkdm_name = "l4ls_clkdm",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = am33xx_uart3_irqs,
.sdma_reqs = uart3_edma_reqs,
.main_clk = "dpll_per_m2_div4_ck",
@@ -2062,6 +2065,7 @@ static struct omap_hwmod am33xx_uart4_hwmod = {
.name = "uart4",
.class = &uart_class,
.clkdm_name = "l4ls_clkdm",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = am33xx_uart4_irqs,
.sdma_reqs = uart1_edma_reqs,
.main_clk = "dpll_per_m2_div4_ck",
@@ -2082,6 +2086,7 @@ static struct omap_hwmod am33xx_uart5_hwmod = {
.name = "uart5",
.class = &uart_class,
.clkdm_name = "l4ls_clkdm",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = am33xx_uart5_irqs,
.sdma_reqs = uart1_edma_reqs,
.main_clk = "dpll_per_m2_div4_ck",
@@ -2102,6 +2107,7 @@ static struct omap_hwmod am33xx_uart6_hwmod = {
.name = "uart6",
.class = &uart_class,
.clkdm_name = "l4ls_clkdm",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = am33xx_uart6_irqs,
.sdma_reqs = uart1_edma_reqs,
.main_clk = "dpll_per_m2_div4_ck",
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 4083606..31c7126 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -490,6 +490,7 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = {
.mpu_irqs = omap2_uart1_mpu_irqs,
.sdma_reqs = omap2_uart1_sdma_reqs,
.main_clk = "uart1_fck",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
@@ -508,6 +509,7 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = {
.mpu_irqs = omap2_uart2_mpu_irqs,
.sdma_reqs = omap2_uart2_sdma_reqs,
.main_clk = "uart2_fck",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
@@ -526,6 +528,7 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = {
.mpu_irqs = omap2_uart3_mpu_irqs,
.sdma_reqs = omap2_uart3_sdma_reqs,
.main_clk = "uart3_fck",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
.omap2 = {
.module_offs = OMAP3430_PER_MOD,
@@ -555,6 +558,7 @@ static struct omap_hwmod omap36xx_uart4_hwmod = {
.mpu_irqs = uart4_mpu_irqs,
.sdma_reqs = uart4_sdma_reqs,
.main_clk = "uart4_fck",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
.omap2 = {
.module_offs = OMAP3430_PER_MOD,
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index eaba9dc..848b6dc 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -3434,6 +3434,7 @@ static struct omap_hwmod omap44xx_uart1_hwmod = {
.name = "uart1",
.class = &omap44xx_uart_hwmod_class,
.clkdm_name = "l4_per_clkdm",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = omap44xx_uart1_irqs,
.sdma_reqs = omap44xx_uart1_sdma_reqs,
.main_clk = "func_48m_fclk",
@@ -3462,6 +3463,7 @@ static struct omap_hwmod omap44xx_uart2_hwmod = {
.name = "uart2",
.class = &omap44xx_uart_hwmod_class,
.clkdm_name = "l4_per_clkdm",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = omap44xx_uart2_irqs,
.sdma_reqs = omap44xx_uart2_sdma_reqs,
.main_clk = "func_48m_fclk",
@@ -3490,7 +3492,8 @@ static struct omap_hwmod omap44xx_uart3_hwmod = {
.name = "uart3",
.class = &omap44xx_uart_hwmod_class,
.clkdm_name = "l4_per_clkdm",
- .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+ .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET |
+ HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = omap44xx_uart3_irqs,
.sdma_reqs = omap44xx_uart3_sdma_reqs,
.main_clk = "func_48m_fclk",
@@ -3519,6 +3522,7 @@ static struct omap_hwmod omap44xx_uart4_hwmod = {
.name = "uart4",
.class = &omap44xx_uart_hwmod_class,
.clkdm_name = "l4_per_clkdm",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = omap44xx_uart4_irqs,
.sdma_reqs = omap44xx_uart4_sdma_reqs,
.main_clk = "func_48m_fclk",
--
cgit v1.1
From e59cd225c0ad280122cb69e04cd66699557875a4 Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Wed, 15 May 2013 20:18:40 +0530
Subject: ARM: OMAP2+: serial: Remove the un-used slave idle hooks
UART IP idle handling now taken care by runtime pm backend(hwmod) indirectly
and OMAP serial driver is also cleaned up accordingly.
So remove the un-used slave idle platforms hooks now.
Tested-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Tested-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Rajendra nayak <rnayak@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org> # OMAP4/Panda
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/serial.c | 31 -------------------------------
1 file changed, 31 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 8396b5b..f660156 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -95,38 +95,9 @@ static void omap_uart_enable_wakeup(struct device *dev, bool enable)
omap_hwmod_disable_wakeup(od->hwmods[0]);
}
-/*
- * Errata i291: [UART]:Cannot Acknowledge Idle Requests
- * in Smartidle Mode When Configured for DMA Operations.
- * WA: configure uart in force idle mode.
- */
-static void omap_uart_set_noidle(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct omap_device *od = to_omap_device(pdev);
-
- omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO);
-}
-
-static void omap_uart_set_smartidle(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct omap_device *od = to_omap_device(pdev);
- u8 idlemode;
-
- if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP)
- idlemode = HWMOD_IDLEMODE_SMART_WKUP;
- else
- idlemode = HWMOD_IDLEMODE_SMART;
-
- omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode);
-}
-
#else
static void omap_uart_enable_wakeup(struct device *dev, bool enable)
{}
-static void omap_uart_set_noidle(struct device *dev) {}
-static void omap_uart_set_smartidle(struct device *dev) {}
#endif /* CONFIG_PM */
#ifdef CONFIG_OMAP_MUX
@@ -299,8 +270,6 @@ void __init omap_serial_init_port(struct omap_board_data *bdata,
omap_up.uartclk = OMAP24XX_BASE_BAUD * 16;
omap_up.flags = UPF_BOOT_AUTOCONF;
omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count;
- omap_up.set_forceidle = omap_uart_set_smartidle;
- omap_up.set_noidle = omap_uart_set_noidle;
omap_up.enable_wakeup = omap_uart_enable_wakeup;
omap_up.dma_rx_buf_size = info->dma_rx_buf_size;
omap_up.dma_rx_timeout = info->dma_rx_timeout;
--
cgit v1.1
From 3260c76055afc6c9396e5ad9f9e599505ea8891f Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Wed, 15 May 2013 20:18:42 +0530
Subject: ARM: OMAP2+: hwmod: Remove sysc slave idle and auto idle apis
With the OMAP serial driver sysc cleanup patches in this series, we can
now remove the hwmod external apis for sysc fiddling.
While at this, also remove unused sysc auto idle api from hwmod code.
Tested-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Tested-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Rajendra nayak <rnayak@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org> # OMAP4/Panda
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/omap_hwmod.c | 68 ----------------------------------------
arch/arm/mach-omap2/omap_hwmod.h | 3 --
2 files changed, 71 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 5739429..0393142 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -2255,42 +2255,6 @@ static int _idle(struct omap_hwmod *oh)
}
/**
- * omap_hwmod_set_ocp_autoidle - set the hwmod's OCP autoidle bit
- * @oh: struct omap_hwmod *
- * @autoidle: desired AUTOIDLE bitfield value (0 or 1)
- *
- * Sets the IP block's OCP autoidle bit in hardware, and updates our
- * local copy. Intended to be used by drivers that require
- * direct manipulation of the AUTOIDLE bits.
- * Returns -EINVAL if @oh is null or is not in the ENABLED state, or passes
- * along the return value from _set_module_autoidle().
- *
- * Any users of this function should be scrutinized carefully.
- */
-int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle)
-{
- u32 v;
- int retval = 0;
- unsigned long flags;
-
- if (!oh || oh->_state != _HWMOD_STATE_ENABLED)
- return -EINVAL;
-
- spin_lock_irqsave(&oh->_lock, flags);
-
- v = oh->_sysc_cache;
-
- retval = _set_module_autoidle(oh, autoidle, &v);
-
- if (!retval)
- _write_sysconfig(v, oh);
-
- spin_unlock_irqrestore(&oh->_lock, flags);
-
- return retval;
-}
-
-/**
* _shutdown - shutdown an omap_hwmod
* @oh: struct omap_hwmod *
*
@@ -3189,38 +3153,6 @@ error:
}
/**
- * omap_hwmod_set_slave_idlemode - set the hwmod's OCP slave idlemode
- * @oh: struct omap_hwmod *
- * @idlemode: SIDLEMODE field bits (shifted to bit 0)
- *
- * Sets the IP block's OCP slave idlemode in hardware, and updates our
- * local copy. Intended to be used by drivers that have some erratum
- * that requires direct manipulation of the SIDLEMODE bits. Returns
- * -EINVAL if @oh is null, or passes along the return value from
- * _set_slave_idlemode().
- *
- * XXX Does this function have any current users? If not, we should
- * remove it; it is better to let the rest of the hwmod code handle this.
- * Any users of this function should be scrutinized carefully.
- */
-int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode)
-{
- u32 v;
- int retval = 0;
-
- if (!oh)
- return -EINVAL;
-
- v = oh->_sysc_cache;
-
- retval = _set_slave_idlemode(oh, idlemode, &v);
- if (!retval)
- _write_sysconfig(v, oh);
-
- return retval;
-}
-
-/**
* omap_hwmod_lookup - look up a registered omap_hwmod by name
* @name: name of the omap_hwmod to look up
*
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index 8498774..0c898f5 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -645,9 +645,6 @@ int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name);
int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
-int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode);
-int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle);
-
int omap_hwmod_reset(struct omap_hwmod *oh);
void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
--
cgit v1.1
From 7ec892ef5f1bd707e2d5ab128069cb6af75c7f07 Mon Sep 17 00:00:00 2001
From: Vivek Gautam <gautam.vivek@samsung.com>
Date: Wed, 10 Apr 2013 19:30:38 +0900
Subject: ARM: dts: Enabling samsung-usb2phy driver for exynos5250
Adding usbphy node for Exynos5250 along with the
necessary device data to be parsed.
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/boot/dts/exynos5250.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
(limited to 'arch/arm')
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 98dfc3e..0673524 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -497,6 +497,21 @@
clock-names = "usbhost";
};
+ usbphy@12130000 {
+ compatible = "samsung,exynos5250-usb2phy";
+ reg = <0x12130000 0x100>;
+ clocks = <&clock 1>, <&clock 285>;
+ clock-names = "ext_xtal", "usbhost";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usbphy-sys {
+ reg = <0x10040704 0x8>,
+ <0x10050230 0x4>;
+ };
+ };
+
amba {
#address-cells = <1>;
#size-cells = <1>;
--
cgit v1.1
From 2b8b2797142c7951e635c6eec5d1705ee9bc45c5 Mon Sep 17 00:00:00 2001
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
Date: Sun, 19 May 2013 22:12:43 +0200
Subject: ARM: plat-orion: Fix num_resources and id for ge10 and ge11
When platform data were moved from arch/arm/mach-mv78xx0/common.c to
arch/arm/plat-orion/common.c with the commit "7e3819d ARM: orion:
Consolidate ethernet platform data", there were few typo made on
gigabit Ethernet interface ge10 and ge11. This commit writes back
their initial value, which allows to use this interfaces again.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Cc: <stable@vger.kernel.org> # v3.0.x
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
---
arch/arm/plat-orion/common.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 251f827..c019b7a 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -383,7 +383,7 @@ static struct resource orion_ge10_shared_resources[] = {
static struct platform_device orion_ge10_shared = {
.name = MV643XX_ETH_SHARED_NAME,
- .id = 1,
+ .id = 2,
.dev = {
.platform_data = &orion_ge10_shared_data,
},
@@ -398,8 +398,8 @@ static struct resource orion_ge10_resources[] = {
static struct platform_device orion_ge10 = {
.name = MV643XX_ETH_NAME,
- .id = 1,
- .num_resources = 2,
+ .id = 2,
+ .num_resources = 1,
.resource = orion_ge10_resources,
.dev = {
.coherent_dma_mask = DMA_BIT_MASK(32),
@@ -432,7 +432,7 @@ static struct resource orion_ge11_shared_resources[] = {
static struct platform_device orion_ge11_shared = {
.name = MV643XX_ETH_SHARED_NAME,
- .id = 1,
+ .id = 3,
.dev = {
.platform_data = &orion_ge11_shared_data,
},
@@ -447,8 +447,8 @@ static struct resource orion_ge11_resources[] = {
static struct platform_device orion_ge11 = {
.name = MV643XX_ETH_NAME,
- .id = 1,
- .num_resources = 2,
+ .id = 3,
+ .num_resources = 1,
.resource = orion_ge11_resources,
.dev = {
.coherent_dma_mask = DMA_BIT_MASK(32),
--
cgit v1.1
From 489e138eec96f529c5e8d4cd3ea45882ecdbf5ca Mon Sep 17 00:00:00 2001
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
Date: Mon, 20 May 2013 16:13:27 +0200
Subject: ARM: dts: mvebu: Fix wrong the address reg value for the L2-cache
node
During the conversion to the internal-regs' subnode, the L2-cache node
haven not been converted (due to a wrong choice made by myself during
the resolution of the merge conflict when I rebased the commit). This
leads to wrong address for L2 cache which prevent it to be used on
Armada 370. This commit fix the address reg of the e L2-cache node.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
---
arch/arm/boot/dts/armada-370.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'arch/arm')
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index a1a8703..aee2b18 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -39,7 +39,7 @@
L2: l2-cache {
compatible = "marvell,aurora-outer-cache";
- reg = <0xd0008000 0x1000>;
+ reg = <0x08000 0x1000>;
cache-id-part = <0x100>;
wt-override;
};
--
cgit v1.1
From 9f8466c6e09e62a1d047f2e57d90cd42e46b35c1 Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Date: Fri, 17 May 2013 08:44:17 +0100
Subject: ARM: vt8500: Add missing NULL terminator in dt_compat
When I tried booting a stih415 Dual core A9 with multi_v7_defconfig, it
failed to boot. The issues seems to be changing by enabling or disabling
VT8550 platform. Having a quick look at dt_compat list, it seems to miss
a NULL terminator, which means of_flat_dt_match will compat check will
cross the boundary of dt_compat and fault at some point , which is what
was happening in my case.
Without this patch if we try to boot multi_v7_defconfig you might notice
that some of the platforms might fault if they fall after vt8500 in
machine-desc list. Other platforms which fall before vt8500 in mdesc list
will not fault.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Acked-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Olof Johansson <olof@lixom.net>
---
arch/arm/mach-vt8500/vt8500.c | 1 +
1 file changed, 1 insertion(+)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c
index 1dd281e..f5c33df 100644
--- a/arch/arm/mach-vt8500/vt8500.c
+++ b/arch/arm/mach-vt8500/vt8500.c
@@ -173,6 +173,7 @@ static const char * const vt8500_dt_compat[] = {
"wm,wm8505",
"wm,wm8750",
"wm,wm8850",
+ NULL
};
DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)")
--
cgit v1.1
From b98da4db297bad34a5577df36ff4cb2a8fc90923 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Sun, 19 May 2013 00:47:39 +0200
Subject: ARM: nomadik: fix IRQ assignment for SMC ethernet
The assignment of IRQ for the SMC91x ethernet adapter had two
problems making it non-working:
- It was not put into the ethernet device node. Let's do this
by using the board-specific overlay, so we can make other
overlays on other Nomadik boards.
- The IRQ number was actually completely wrong, this was the
number for NHK8815, not S8815.
After this ethernet starts working on the USB S8815.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
---
arch/arm/boot/dts/ste-nomadik-s8815.dts | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts
index b28fbf3..6f82d93 100644
--- a/arch/arm/boot/dts/ste-nomadik-s8815.dts
+++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts
@@ -14,13 +14,19 @@
bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk";
};
+ /* This is where the interrupt is routed on the S8815 board */
+ external-bus@34000000 {
+ ethernet@300 {
+ interrupt-parent = <&gpio3>;
+ interrupts = <8 0x1>;
+ };
+ };
+
/* Custom board node with GPIO pins to active etc */
usb-s8815 {
/* The S8815 is using this very GPIO pin for the SMSC91x IRQs */
ethernet-gpio {
- gpios = <&gpio3 19 0x1>;
- interrupts = <19 0x1>;
- interrupt-parent = <&gpio3>;
+ gpios = <&gpio3 8 0x1>;
};
/* This will bias the MMC/SD card detect line */
mmcsd-gpio {
--
cgit v1.1
From 8d9849b05154ff6f19f538c2d094ea0f32981bb0 Mon Sep 17 00:00:00 2001
From: Alexandre Courbot <gnurou@gmail.com>
Date: Mon, 20 May 2013 13:07:19 -0600
Subject: ARM: tegra: defconfig fixes
The AK8975 Kconfig option was renamed during the 3.10 merge window.
Adjust tegra_defconfig to enable the new name, so it's not missing
useful features.
Tegra DRM support used to be enabled in the default Tegra configuration,
but it now depends on CONFIG_TEGRA_HOST1X which is disabled by default.
Enable CONFIG_TEGRA_HOST1X so that DRM support is compiled in again.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
[swarren, squashed Alex's and my changes together]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
---
arch/arm/configs/tegra_defconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
(limited to 'arch/arm')
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index a5f0485..f7ba3161 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -153,6 +153,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_DRM=y
+CONFIG_TEGRA_HOST1X=y
CONFIG_DRM_TEGRA=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
@@ -202,7 +203,7 @@ CONFIG_TEGRA20_APB_DMA=y
CONFIG_STAGING=y
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
-CONFIG_SENSORS_AK8975=y
+CONFIG_AK8975=y
CONFIG_MFD_NVEC=y
CONFIG_KEYBOARD_NVEC=y
CONFIG_SERIO_NVEC_PS2=y
--
cgit v1.1
From aa033810461ee56abbef6cef10aabd6b97f5caee Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Mon, 20 May 2013 17:57:16 -0700
Subject: ARM: smp: Drop RCU_NONIDLE usage in cpu_die()
Before f7b861b7a6d9 ("arm: Use generic idle loop") ARM would kill the
CPU within the rcu idle section. Now that the rcu_idle_enter()/exit()
pair have been pushed lower down in the idle loop this is no longer true
and so using RCU_NONIDLE here is no longer necessary and also harmful
because RCU is not actually idle at this point.
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
arch/arm/kernel/smp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'arch/arm')
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 47ab905..550d63c 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -251,7 +251,7 @@ void __ref cpu_die(void)
* this returns, power and/or clocks can be removed at any point
* from this CPU and its cache by platform_cpu_kill().
*/
- RCU_NONIDLE(complete(&cpu_died));
+ complete(&cpu_died);
/*
* Ensure that the cache lines associated with that completion are
--
cgit v1.1
From 5f10428e4a6d99cc019270c51ad5a33fb38addeb Mon Sep 17 00:00:00 2001
From: Simon Horman <horms+renesas@verge.net.au>
Date: Thu, 16 May 2013 12:14:59 +0900
Subject: ARM: shmobile: marzen: Use error values in usb_power_*
This patch updates the marzen board code as if USB PHY isn't enabled
they phy will have a value set by ERR_PTR() rather than be NULL.
Without this patch a NULL pointer dereference and kernel panic
occurs on initialisation of USB on marzen.
This resolves a regression introduced in 3.10-rc1 by
b7fa5c2aec5be083eb2719b405089703608e9bc6
("usb: phy: return -ENXIO when PHY layer isn't enabled").
Tested-by: Nguyen Hong Ky <nh-ky@jinso.co.jp>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/mach-shmobile/board-marzen.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index 9105285..b9594e9 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -212,8 +212,8 @@ static struct platform_device *marzen_devices[] __initdata = {
static struct usb_phy *phy;
static int usb_power_on(struct platform_device *pdev)
{
- if (!phy)
- return -EIO;
+ if (IS_ERR(phy))
+ return PTR_ERR(phy);
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
@@ -225,7 +225,7 @@ static int usb_power_on(struct platform_device *pdev)
static void usb_power_off(struct platform_device *pdev)
{
- if (!phy)
+ if (IS_ERR(phy))
return;
usb_phy_shutdown(phy);
--
cgit v1.1
From 934fc24df10abfd5aff533d0d044a17669d77d79 Mon Sep 17 00:00:00 2001
From: Ard Biesheuvel <ard.biesheuvel@gmail.com>
Date: Wed, 15 May 2013 10:46:30 +0100
Subject: ARM: 7723/1: crypto: sha1-armv4-large.S: fix SP handling
Make the SHA1 asm code ABI conformant by making sure all stack
accesses occur above the stack pointer.
Origin:
http://git.openssl.org/gitweb/?p=openssl.git;a=commit;h=1a9d60d2
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
arch/arm/crypto/sha1-armv4-large.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'arch/arm')
diff --git a/arch/arm/crypto/sha1-armv4-large.S b/arch/arm/crypto/sha1-armv4-large.S
index 92c6eed..99207c4 100644
--- a/arch/arm/crypto/sha1-armv4-large.S
+++ b/arch/arm/crypto/sha1-armv4-large.S
@@ -195,6 +195,7 @@ ENTRY(sha1_block_data_order)
add r3,r3,r10 @ E+=F_00_19(B,C,D)
cmp r14,sp
bne .L_00_15 @ [((11+4)*5+2)*3]
+ sub sp,sp,#25*4
#if __ARM_ARCH__<7
ldrb r10,[r1,#2]
ldrb r9,[r1,#3]
@@ -290,7 +291,6 @@ ENTRY(sha1_block_data_order)
add r3,r3,r10 @ E+=F_00_19(B,C,D)
ldr r8,.LK_20_39 @ [+15+16*4]
- sub sp,sp,#25*4
cmn sp,#0 @ [+3], clear carry to denote 20_39
.L_20_39_or_60_79:
ldr r9,[r14,#15*4]
--
cgit v1.1
From 4ca46c5e1f38e32c90247686e9e17dae213ecbdb Mon Sep 17 00:00:00 2001
From: Steven Capper <steve.capper@linaro.org>
Date: Thu, 16 May 2013 17:16:11 +0100
Subject: ARM: 7727/1: remove the .vm_mm value from gate_vma
If one reads /proc/$PID/smaps, the mmap_sem belonging to the
address space of the task being examined is locked for reading.
All the pages of the vmas belonging to the task's address space
are then walked with this lock held.
If a gate_vma is present in the architecture, it too is examined
by the fs/proc/task_mmu.c code. As gate_vma doesn't belong to the
address space of the task though, its pages are not walked.
A recent cleanup (commit f6604efe) of the gate_vma initialisation
code set the vm_mm value to &init_mm. Unfortunately a non-NULL
vm_mm value in the gate_vma will cause the task_mmu code to attempt
to walk the pages of the gate_vma (with no mmap-sem lock held). If
one enables Transparent Huge Page support and vm debugging, this
will then cause OOPses as pmd_trans_huge_lock is called without
mmap_sem being locked.
This patch removes the .vm_mm value from gate_vma, restoring the
original behaviour of the task_mmu code.
Signed-off-by: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
arch/arm/kernel/process.c | 1 -
1 file changed, 1 deletion(-)
(limited to 'arch/arm')
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index f219703..282de48 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -411,7 +411,6 @@ static struct vm_area_struct gate_vma = {
.vm_start = 0xffff0000,
.vm_end = 0xffff0000 + PAGE_SIZE,
.vm_flags = VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYEXEC,
- .vm_mm = &init_mm,
};
static int __init gate_vma_init(void)
--
cgit v1.1
From f27d6e172367a424ecf9d373062a820338671277 Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Thu, 16 May 2013 19:38:51 +0100
Subject: ARM: 7729/1: vfp: ensure VFP_arch is non-zero when VFP is not
supported
Commit d3f79584a8b5 ("ARM: cleanup undefined instruction entry code")
improved the register scheduling when handling undefined instructions.
A side effect of this is that r5 is now used as a temporary, whilst the
VFP probing code relies on r5 containing a non-zero value when VFP is
not supported.
This patch fixes the VFP detection code so that we don't rely on the
contents of r5. Without this patch, Linux dies loudly on CPUs without
VFP support.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
arch/arm/vfp/entry.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'arch/arm')
diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S
index 323ce1a..46e1749 100644
--- a/arch/arm/vfp/entry.S
+++ b/arch/arm/vfp/entry.S
@@ -60,7 +60,7 @@ ENTRY(vfp_testing_entry)
str r11, [r10, #TI_PREEMPT]
#endif
ldr r0, VFP_arch_address
- str r5, [r0] @ known non-zero value
+ str r0, [r0] @ set to non-zero value
mov pc, r9 @ we have handled the fault
ENDPROC(vfp_testing_entry)
--
cgit v1.1
From cc9a3e99949af4bcaf9027fc57f824b595a5fcac Mon Sep 17 00:00:00 2001
From: Jiada Wang <jiada_wang@mentor.com>
Date: Mon, 20 May 2013 21:51:51 +0900
Subject: ARM i.MX6q: fix for ldb_di_sels
As pll5_video_div has been introduced to represent the clock
generated from post-divider for video.
Instead of pll5_video, pll5_video_div should be proper root clock
for ldb_di_sel.
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/mach-imx/clk-imx6q.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index dda9a2b..ba2de54 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -188,7 +188,7 @@ static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m"
static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll3_pfd0_720m", };
static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
-static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", };
+static const char *ldb_di_sels[] = { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", };
static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
static const char *ipu1_di0_sels[] = { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
static const char *ipu1_di1_sels[] = { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
--
cgit v1.1
From 37523dc5ec2fead0eb5235fd9334f0419013a1f2 Mon Sep 17 00:00:00 2001
From: Jonas Andersson <jonas@microbit.se>
Date: Thu, 23 May 2013 13:38:05 +0200
Subject: ARM: dts: imx: fix clocks for cspi
The CSPI controller has only one clock, but the driver spi-imx.c needs
clock "per" to calculate bitrate divisor.
Signed-off-by: Jonas Andersson <jonas@microbit.se>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/boot/dts/imx25.dtsi | 12 ++++++------
arch/arm/boot/dts/imx27.dtsi | 6 +++---
arch/arm/boot/dts/imx51.dtsi | 2 +-
arch/arm/boot/dts/imx53.dtsi | 2 +-
4 files changed, 11 insertions(+), 11 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index d2550e0..7011539 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -141,8 +141,8 @@
#size-cells = <0>;
compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
reg = <0x43fa4000 0x4000>;
- clocks = <&clks 62>;
- clock-names = "ipg";
+ clocks = <&clks 62>, <&clks 62>;
+ clock-names = "ipg", "per";
interrupts = <14>;
status = "disabled";
};
@@ -182,8 +182,8 @@
compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
reg = <0x50004000 0x4000>;
interrupts = <0>;
- clocks = <&clks 80>;
- clock-names = "ipg";
+ clocks = <&clks 80>, <&clks 80>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -210,8 +210,8 @@
#size-cells = <0>;
compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
reg = <0x50010000 0x4000>;
- clocks = <&clks 79>;
- clock-names = "ipg";
+ clocks = <&clks 79>, <&clks 79>;
+ clock-names = "ipg", "per";
interrupts = <13>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index ff4bd48..75bd113 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -131,7 +131,7 @@
compatible = "fsl,imx27-cspi";
reg = <0x1000e000 0x1000>;
interrupts = <16>;
- clocks = <&clks 53>, <&clks 0>;
+ clocks = <&clks 53>, <&clks 53>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -142,7 +142,7 @@
compatible = "fsl,imx27-cspi";
reg = <0x1000f000 0x1000>;
interrupts = <15>;
- clocks = <&clks 52>, <&clks 0>;
+ clocks = <&clks 52>, <&clks 52>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -223,7 +223,7 @@
compatible = "fsl,imx27-cspi";
reg = <0x10017000 0x1000>;
interrupts = <6>;
- clocks = <&clks 51>, <&clks 0>;
+ clocks = <&clks 51>, <&clks 51>;
clock-names = "ipg", "per";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 21bb786..53fdde6 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -631,7 +631,7 @@
compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
reg = <0x83fc0000 0x4000>;
interrupts = <38>;
- clocks = <&clks 55>, <&clks 0>;
+ clocks = <&clks 55>, <&clks 55>;
clock-names = "ipg", "per";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 845982e..eb83aa0 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -714,7 +714,7 @@
compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
reg = <0x63fc0000 0x4000>;
interrupts = <38>;
- clocks = <&clks 55>, <&clks 0>;
+ clocks = <&clks 55>, <&clks 55>;
clock-names = "ipg", "per";
status = "disabled";
};
--
cgit v1.1
From 029efddab6967f755c21f47b0bc456f1a546805f Mon Sep 17 00:00:00 2001
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Fri, 24 May 2013 00:59:16 +0200
Subject: ARM: at91: at91sam9n12: move external irq declatation to DT
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
arch/arm/boot/dts/at91sam9n12.dtsi | 1 +
arch/arm/mach-at91/at91sam9n12.c | 6 ------
2 files changed, 1 insertion(+), 6 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 3de8e6d..8d25f88 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -57,6 +57,7 @@
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
reg = <0xfffff000 0x200>;
+ atmel,external-irqs = <31>;
};
ramc0: ramc@ffffe800 {
diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c
index 13cdbcd..c7d670d 100644
--- a/arch/arm/mach-at91/at91sam9n12.c
+++ b/arch/arm/mach-at91/at91sam9n12.c
@@ -223,13 +223,7 @@ static void __init at91sam9n12_map_io(void)
at91_init_sram(0, AT91SAM9N12_SRAM_BASE, AT91SAM9N12_SRAM_SIZE);
}
-void __init at91sam9n12_initialize(void)
-{
- at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0);
-}
-
AT91_SOC_START(at91sam9n12)
.map_io = at91sam9n12_map_io,
.register_clocks = at91sam9n12_register_clocks,
- .init = at91sam9n12_initialize,
AT91_SOC_END
--
cgit v1.1
From f6d35d67d0a5c159f767a20f4fcc1d295a7314b1 Mon Sep 17 00:00:00 2001
From: Boris BREZILLON <b.brezillon@overkiz.com>
Date: Thu, 23 May 2013 18:01:21 +0200
Subject: ARM: at91/dt: fix macb pinctrl_macb_rmii_mii_alt definition
The PA24 pin is wrongly assigned to peripheral B.
In the current config there is 2 ETX3 pins (PA11 and PA24) and
no ETXER pin (PA22).
Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: stable <stable@vger.kernel.org> # 3.8+
---
arch/arm/boot/dts/at91sam9260.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'arch/arm')
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 70b5ccb..84c4bef 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -264,7 +264,7 @@
atmel,pins =
<0 10 0x2 0x0 /* PA10 periph B */
0 11 0x2 0x0 /* PA11 periph B */
- 0 24 0x2 0x0 /* PA24 periph B */
+ 0 22 0x2 0x0 /* PA22 periph B */
0 25 0x2 0x0 /* PA25 periph B */
0 26 0x2 0x0 /* PA26 periph B */
0 27 0x2 0x0 /* PA27 periph B */
--
cgit v1.1
From 144ea15e4fefbee14a7dcb05c7cd0822fda3ebf6 Mon Sep 17 00:00:00 2001
From: Josh Wu <josh.wu@atmel.com>
Date: Thu, 23 May 2013 10:18:48 +0000
Subject: ARM: at91/sama5: fix incorrect PMC pcr div definition
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
arch/arm/mach-at91/include/mach/at91_pmc.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index 31df120..2bd7f51 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -179,9 +179,9 @@ extern void __iomem *at91_pmc_base;
#define AT91_PMC_PCR_CMD (0x1 << 12) /* Command (read=0, write=1) */
#define AT91_PMC_PCR_DIV(n) ((n) << 16) /* Divisor Value */
#define AT91_PMC_PCR_DIV0 0x0 /* Peripheral clock is MCK */
-#define AT91_PMC_PCR_DIV2 0x2 /* Peripheral clock is MCK/2 */
-#define AT91_PMC_PCR_DIV4 0x4 /* Peripheral clock is MCK/4 */
-#define AT91_PMC_PCR_DIV8 0x8 /* Peripheral clock is MCK/8 */
+#define AT91_PMC_PCR_DIV2 0x1 /* Peripheral clock is MCK/2 */
+#define AT91_PMC_PCR_DIV4 0x2 /* Peripheral clock is MCK/4 */
+#define AT91_PMC_PCR_DIV8 0x3 /* Peripheral clock is MCK/8 */
#define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */
#endif
--
cgit v1.1
From 68a433f18c0574b50c5952978ca95b0db7347174 Mon Sep 17 00:00:00 2001
From: Tomasz Figa <t.figa@samsung.com>
Date: Sat, 25 May 2013 06:27:29 +0900
Subject: ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC
This patch extends exynos_init_time() function to handle Exynos4210
rev0 SoC, which differs in availability of system timers and needs
different clocksource initialization.
This makes it possible to use exynos_init_time() function as init_time
callback for all Exynos-based boards, including Universal_C210, which
originally had to use samsung_timer_init().
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-exynos/Kconfig | 3 ++-
arch/arm/mach-exynos/common.c | 30 +++++++++++++++++++++++++++++-
arch/arm/mach-exynos/common.h | 2 ++
arch/arm/mach-exynos/mach-universal_c210.c | 5 ++---
4 files changed, 35 insertions(+), 5 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index d19edff..ff18fc2 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -250,6 +250,7 @@ config MACH_ARMLEX4210
config MACH_UNIVERSAL_C210
bool "Mobile UNIVERSAL_C210 Board"
select CLKSRC_MMIO
+ select CLKSRC_SAMSUNG_PWM
select CPU_EXYNOS4210
select EXYNOS4_SETUP_FIMC
select EXYNOS4_SETUP_FIMD0
@@ -281,7 +282,6 @@ config MACH_UNIVERSAL_C210
select S5P_DEV_TV
select S5P_GPIO_INT
select S5P_SETUP_MIPIPHY
- select SAMSUNG_HRT
help
Machine support for Samsung Mobile Universal S5PC210 Reference
Board.
@@ -410,6 +410,7 @@ config MACH_EXYNOS4_DT
depends on ARCH_EXYNOS4
select ARM_AMBA
select CLKSRC_OF
+ select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210
select CPU_EXYNOS4210
select KEYBOARD_SAMSUNG if INPUT_KEYBOARD
select PINCTRL
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 745e304..a2d2012 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -10,12 +10,14 @@
*/
#include <linux/kernel.h>
+#include <linux/bitops.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqchip.h>
#include <linux/io.h>
#include <linux/device.h>
#include <linux/gpio.h>
+#include <clocksource/samsung_pwm.h>
#include <linux/sched.h>
#include <linux/serial_core.h>
#include <linux/of.h>
@@ -302,6 +304,13 @@ static struct map_desc exynos5440_iodesc0[] __initdata = {
},
};
+static struct samsung_pwm_variant exynos4_pwm_variant = {
+ .bits = 32,
+ .div_base = 0,
+ .has_tint_cstat = true,
+ .tclk_mask = 0,
+};
+
void exynos4_restart(char mode, const char *cmd)
{
__raw_writel(0x1, S5P_SWRESET);
@@ -442,8 +451,20 @@ static void __init exynos5440_map_io(void)
iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0));
}
+void __init exynos_set_timer_source(u8 channels)
+{
+ exynos4_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+ exynos4_pwm_variant.output_mask &= ~channels;
+}
+
void __init exynos_init_time(void)
{
+ unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+ EXYNOS4_IRQ_TIMER0_VIC, EXYNOS4_IRQ_TIMER1_VIC,
+ EXYNOS4_IRQ_TIMER2_VIC, EXYNOS4_IRQ_TIMER3_VIC,
+ EXYNOS4_IRQ_TIMER4_VIC,
+ };
+
if (of_have_populated_dt()) {
#ifdef CONFIG_OF
of_clk_init(NULL);
@@ -455,7 +476,14 @@ void __init exynos_init_time(void)
exynos4_clk_init(NULL, !soc_is_exynos4210(), S5P_VA_CMU, readl(S5P_VA_CHIPID + 8) & 1);
exynos4_clk_register_fixed_ext(xxti_f, xusbxti_f);
#endif
- mct_init(S5P_VA_SYSTIMER, EXYNOS4_IRQ_MCT_G0, EXYNOS4_IRQ_MCT_L0, EXYNOS4_IRQ_MCT_L1);
+#ifdef CONFIG_CLKSRC_SAMSUNG_PWM
+ if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
+ samsung_pwm_clocksource_init(S3C_VA_TIMER,
+ timer_irqs, &exynos4_pwm_variant);
+ else
+#endif
+ mct_init(S5P_VA_SYSTIMER, EXYNOS4_IRQ_MCT_G0,
+ EXYNOS4_IRQ_MCT_L0, EXYNOS4_IRQ_MCT_L1);
}
}
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 60dd35c..11fc1e2 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -32,6 +32,8 @@ void exynos4_clk_register_fixed_ext(unsigned long, unsigned long);
void exynos_firmware_init(void);
+void exynos_set_timer_source(u8 channels);
+
#ifdef CONFIG_PM_GENERIC_DOMAINS
int exynos_pm_late_initcall(void);
#else
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 327d50d..74ddb2b 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -41,7 +41,6 @@
#include <plat/mfc.h>
#include <plat/sdhci.h>
#include <plat/fimc-core.h>
-#include <plat/samsung-time.h>
#include <plat/camport.h>
#include <mach/map.h>
@@ -1094,7 +1093,7 @@ static void __init universal_map_io(void)
{
exynos_init_io(NULL, 0);
s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM2, SAMSUNG_PWM4);
+ exynos_set_timer_source(BIT(2) | BIT(4));
xxti_f = 0;
xusbxti_f = 24000000;
}
@@ -1154,7 +1153,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
.map_io = universal_map_io,
.init_machine = universal_machine_init,
.init_late = exynos_init_late,
- .init_time = samsung_timer_init,
+ .init_time = exynos_init_time,
.reserve = &universal_reserve,
.restart = exynos4_restart,
MACHINE_END
--
cgit v1.1
From 1ba830c9997214a7fbe4d91cf238793764620e3b Mon Sep 17 00:00:00 2001
From: Jungseok Lee <jays.lee@samsung.com>
Date: Sat, 25 May 2013 06:33:03 +0900
Subject: ARM: EXYNOS: fix software reset logic for EXYNOS5440 SOC
This patch fixes software reset logic. Software reset applies only to
powered-on domains in SOC because software reset to all domains causes
reboot failure.
Signed-off-by: Jungseok Lee <jays.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-exynos/common.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index a2d2012..027c9e7 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -326,9 +326,16 @@ void exynos5_restart(char mode, const char *cmd)
val = 0x1;
addr = EXYNOS_SWRESET;
} else if (of_machine_is_compatible("samsung,exynos5440")) {
+ u32 status;
np = of_find_compatible_node(NULL, NULL, "samsung,exynos5440-clock");
+
+ addr = of_iomap(np, 0) + 0xbc;
+ status = __raw_readl(addr);
+
addr = of_iomap(np, 0) + 0xcc;
- val = (0xfff << 20) | (0x1 << 16);
+ val = __raw_readl(addr);
+
+ val = (val & 0xffff0000) | (status & 0xffff);
} else {
pr_err("%s: cannot support non-DT\n", __func__);
return;
--
cgit v1.1
From 15f504f0c2038b9a0f1569c9ce34def61f0c65be Mon Sep 17 00:00:00 2001
From: Tomasz Figa <t.figa@samsung.com>
Date: Sat, 25 May 2013 06:49:43 +0900
Subject: ARM: SAMSUNG: Add names to fimd0 IRQ resources
Since commit 1977e6d8 (drm/exynos: change the method for getting the
interrupt) the Exynos DRM FIMD driver requires IRQ resources to be
named. This patch fixes probe failure in non-DT cases by adding
appropriate resource names to fimd0 platform device.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/plat-samsung/devs.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 30c2fe2..0f9c3f4 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -311,9 +311,9 @@ struct platform_device s5p_device_jpeg = {
#ifdef CONFIG_S5P_DEV_FIMD0
static struct resource s5p_fimd0_resource[] = {
[0] = DEFINE_RES_MEM(S5P_PA_FIMD0, SZ_32K),
- [1] = DEFINE_RES_IRQ(IRQ_FIMD0_VSYNC),
- [2] = DEFINE_RES_IRQ(IRQ_FIMD0_FIFO),
- [3] = DEFINE_RES_IRQ(IRQ_FIMD0_SYSTEM),
+ [1] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_VSYNC, "vsync"),
+ [2] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_FIFO, "fifo"),
+ [3] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_SYSTEM, "lcd_sys"),
};
struct platform_device s5p_device_fimd0 = {
--
cgit v1.1
From 2c06897e4597b1cd68ef29e4145917a751c2b4cd Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Thu, 16 May 2013 12:15:35 +0100
Subject: ARM: ux500: Only configure wake-up reasons on ux500 based platforms
Multiplatform calls all enabled platforms' initcalls. In the
ux500_idle_init() initcall we call into the DBx500-PRCMU which in turn
executes some ux500 specific register reads/writes. When running on
some !ux500 platforms this ends up causing a kernel Oops. This patch
ensures the PRCMU call is only invoked when running on ux500 based
platforms.
Reported-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/mach-ux500/cpuidle.c | 4 ++++
1 file changed, 4 insertions(+)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-ux500/cpuidle.c b/arch/arm/mach-ux500/cpuidle.c
index 317a2be..a45dd09 100644
--- a/arch/arm/mach-ux500/cpuidle.c
+++ b/arch/arm/mach-ux500/cpuidle.c
@@ -21,6 +21,7 @@
#include <asm/proc-fns.h>
#include "db8500-regs.h"
+#include "id.h"
static atomic_t master = ATOMIC_INIT(0);
static DEFINE_SPINLOCK(master_lock);
@@ -114,6 +115,9 @@ static struct cpuidle_driver ux500_idle_driver = {
int __init ux500_idle_init(void)
{
+ if (!(cpu_is_u8500_family() || cpu_is_ux540_family()))
+ return -ENODEV;
+
/* Configure wake up reasons */
prcmu_enable_wakeups(PRCMU_WAKEUP(ARM) | PRCMU_WAKEUP(RTC) |
PRCMU_WAKEUP(ABB));
--
cgit v1.1
From 67b7c75e1a42f8288450203cd80a26b11dab8582 Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Fri, 24 May 2013 12:22:19 +0100
Subject: ARM: ux500: Provide supplies for AUX1, AUX2 and AUX3
This patch fixes a bug introduced in the v3.10 merge window.
The AB8500 External Regulator driver has recently landed upstream,
which registers each of the 3 external regulators located on the
AB8500. If these regulators are marked as 'always on', there is a
potential for power-loss. If they're not and are seemingly unused
the Regulator subsystem will attempt to disable them to save power.
This causes an issue for AUX1, AUX2 and AUX3 as they obtain their
power from EXT3. So we're specifying that here to prevent EXT3 from
being powered down.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/mach-ux500/board-mop500-regulators.c | 3 +++
1 file changed, 3 insertions(+)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
index 33c353b..d6b7c85 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -374,6 +374,7 @@ static struct ab8500_regulator_reg_init ab8500_reg_init[] = {
static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
/* supplies to the display/camera */
[AB8500_LDO_AUX1] = {
+ .supply_regulator = "ab8500-ext-supply3",
.constraints = {
.name = "V-DISPLAY",
.min_uV = 2800000,
@@ -387,6 +388,7 @@ static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
},
/* supplies to the on-board eMMC */
[AB8500_LDO_AUX2] = {
+ .supply_regulator = "ab8500-ext-supply3",
.constraints = {
.name = "V-eMMC1",
.min_uV = 1100000,
@@ -402,6 +404,7 @@ static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
},
/* supply for VAUX3, supplies to SDcard slots */
[AB8500_LDO_AUX3] = {
+ .supply_regulator = "ab8500-ext-supply3",
.constraints = {
.name = "V-MMC-SD",
.min_uV = 1100000,
--
cgit v1.1
From b134dc3feaa5136b376c7d2658bbe156bea19e63 Mon Sep 17 00:00:00 2001
From: Tomasz Figa <t.figa@samsung.com>
Date: Fri, 17 May 2013 18:24:28 +0200
Subject: ARM: EXYNOS: Fix EINT wake-up mask configuration when pinctrl is used
On DT-enabled systems pinctrl-exynos driver is responsible for handling
of wake-up EINT interrupts. This patch adjusts wake-up mask
configuration code to take wake-up mask value from pinctrl-exynos driver
on DT-enabled systems.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/mach-exynos/include/mach/pm-core.h | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-exynos/include/mach/pm-core.h b/arch/arm/mach-exynos/include/mach/pm-core.h
index 7dbbfec..296090e 100644
--- a/arch/arm/mach-exynos/include/mach/pm-core.h
+++ b/arch/arm/mach-exynos/include/mach/pm-core.h
@@ -18,8 +18,15 @@
#ifndef __ASM_ARCH_PM_CORE_H
#define __ASM_ARCH_PM_CORE_H __FILE__
+#include <linux/of.h>
#include <mach/regs-pmu.h>
+#ifdef CONFIG_PINCTRL_EXYNOS
+extern u32 exynos_get_eint_wake_mask(void);
+#else
+static inline u32 exynos_get_eint_wake_mask(void) { return 0xffffffff; }
+#endif
+
static inline void s3c_pm_debug_init_uart(void)
{
/* nothing here yet */
@@ -27,7 +34,12 @@ static inline void s3c_pm_debug_init_uart(void)
static inline void s3c_pm_arch_prepare_irqs(void)
{
- __raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK);
+ u32 eintmask = s3c_irqwake_eintmask;
+
+ if (of_have_populated_dt())
+ eintmask = exynos_get_eint_wake_mask();
+
+ __raw_writel(eintmask, S5P_EINT_WAKEUP_MASK);
__raw_writel(s3c_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK);
}
--
cgit v1.1
From e89b4058096569c999fa599370162022a5a2b3d2 Mon Sep 17 00:00:00 2001
From: Andrew Lunn <andrew@lunn.ch>
Date: Tue, 21 May 2013 19:41:48 +0200
Subject: ARM: Kirkwood: TS219: Fix crash by double PCIe instantiation
When creating the DT based boards-ts219.c the none DT ts219-setup.c
was used as a template. This includes a lateinit() call to initialize
the PCIe bus. The code makes use of machine_is_ts219() which is never
true on DT, so a FIXME was added and the code left as is. This was
unproblematic until b73690c8f8b5d: "ARM: Kirkwood: Support basic
hotplug for PCI-E" which changes the way the PCIe bus is
initialized. The non-DT ts219-setup.c now crashes during boot. The
lateinit() call in the DT boards-ts219.c is being called,
machine_is_ts219() is true and so the PCIe is initialized a second
time.
This patch removes the useless, and now clearly dangerous, code from
boards-ts219.c, making ts219-setup.c work again.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Cc: <stable@vger.kernel.org> # v3.9.x
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
---
arch/arm/mach-kirkwood/board-ts219.c | 10 ----------
1 file changed, 10 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c
index acb0187..4695d5f 100644
--- a/arch/arm/mach-kirkwood/board-ts219.c
+++ b/arch/arm/mach-kirkwood/board-ts219.c
@@ -41,13 +41,3 @@ void __init qnap_dt_ts219_init(void)
pm_power_off = qnap_tsx1x_power_off;
}
-
-/* FIXME: Will not work with DT. Maybe use MPP40_GPIO? */
-static int __init ts219_pci_init(void)
-{
- if (machine_is_ts219())
- kirkwood_pcie_init(KW_PCIE0);
-
- return 0;
-}
-subsys_initcall(ts219_pci_init);
--
cgit v1.1
From b60b61d41220c8d34e2c62a748bc78bc5d40585e Mon Sep 17 00:00:00 2001
From: Nadav Haklai <nadavh@marvell.com>
Date: Thu, 23 May 2013 10:54:02 +0200
Subject: ARM: mvebu: Fix bug in coherency fabric low level init function
When adding CPU to the SMP group and enabling the coherency on this
CPU we must protect the register access.
The previous implementation claims to be atomic but doesn't provide
any protection against parallel access to the coherency fabric control
and configuration registers.
This patch fixes this by using the ldrex and strex mechanism.
This method should be used in all accesses to those registers.
[gregory.clement@free-electrons.com: fixed the commit's topic]
Signed-off-by: Nadav Haklai <nadavh@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
---
arch/arm/mach-mvebu/coherency_ll.S | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S
index 53e8391..5476669 100644
--- a/arch/arm/mach-mvebu/coherency_ll.S
+++ b/arch/arm/mach-mvebu/coherency_ll.S
@@ -32,15 +32,21 @@ ENTRY(ll_set_cpu_coherent)
/* Add CPU to SMP group - Atomic */
add r3, r0, #ARMADA_XP_CFB_CTL_REG_OFFSET
- ldr r2, [r3]
+1:
+ ldrex r2, [r3]
orr r2, r2, r1
- str r2, [r3]
+ strex r0, r2, [r3]
+ cmp r0, #0
+ bne 1b
/* Enable coherency on CPU - Atomic */
- add r3, r0, #ARMADA_XP_CFB_CFG_REG_OFFSET
- ldr r2, [r3]
+ add r3, r3, #ARMADA_XP_CFB_CFG_REG_OFFSET
+1:
+ ldrex r2, [r3]
orr r2, r2, r1
- str r2, [r3]
+ strex r0, r2, [r3]
+ cmp r0, #0
+ bne 1b
dsb
--
cgit v1.1
From da9d0fbf5e9aa47492a19588bd0efd18d6d172e0 Mon Sep 17 00:00:00 2001
From: Olof Johansson <olof@lixom.net>
Date: Thu, 9 May 2013 13:58:19 -0700
Subject: ARM: exynos: defconfig update
This turns on a number of configs that are useful on the Chromebook, but also
good to have on in general:
* USB host and MMC drivers(!)
* I2C GPIO arbitration driver
* CYAPA trackpad driver
* simplefb
* CROS EC and keyboard drivers
* S5M8767 driver
* MAX77686 drivers
* MAX8997 driver
* DEVTMPFS + mount
* DM_CRYPT (as module)
* CRYPTOLOOP
* HIGHMEM
* PRINTK timestamps
This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel
uart to uart 3 (which is only used to show the "uncompressing kernel"
message at boot, it seems).
Signed-off-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Tushar Behera <tushar.behera@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/configs/exynos_defconfig | 54 +++++++++++++++++++++++++++++++++------
1 file changed, 46 insertions(+), 8 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index e40b435..227abf9 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -1,4 +1,4 @@
-CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BLK_DEV_INITRD=y
@@ -7,17 +7,18 @@ CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
-CONFIG_EFI_PARTITION=y
CONFIG_ARCH_EXYNOS=y
-CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_S3C_LOWLEVEL_UART_PORT=3
CONFIG_S3C24XX_PWM=y
CONFIG_ARCH_EXYNOS5=y
CONFIG_MACH_EXYNOS4_DT=y
-CONFIG_MACH_EXYNOS5_DT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_PREEMPT=y
CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
@@ -30,35 +31,58 @@ CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_RFKILL_REGULATOR=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_CRYPT=m
CONFIG_NETDEVICES=y
CONFIG_SMSC911X=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
+CONFIG_KEYBOARD_CROS_EC=y
+# CONFIG_MOUSE_PS2 is not set
+CONFIG_MOUSE_CYAPA=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_HW_RANDOM=y
+CONFIG_TCG_TPM=y
+CONFIG_TCG_TIS_I2C_INFINEON=y
CONFIG_I2C=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_ARB_GPIO_CHALLENGE=y
+CONFIG_I2C_S3C2410=y
+CONFIG_DEBUG_GPIO=y
# CONFIG_HWMON is not set
+CONFIG_MFD_CROS_EC=y
+CONFIG_MFD_CROS_EC_I2C=y
+CONFIG_MFD_MAX77686=y
+CONFIG_MFD_MAX8997=y
+CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_TPS65090=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_MAX8997=y
+CONFIG_REGULATOR_MAX77686=y
+CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_TPS65090=y
CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_SIMPLE=y
CONFIG_EXYNOS_VIDEO=y
CONFIG_EXYNOS_MIPI_DSI=y
CONFIG_EXYNOS_DP=y
@@ -67,6 +91,20 @@ CONFIG_FONTS=y
CONFIG_FONT_7x14=y
CONFIG_LOGO=y
CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_S5P=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_PHY=y
+CONFIG_SAMSUNG_USB2PHY=y
+CONFIG_SAMSUNG_USB3PHY=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_S3C=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_IDMAC=y
+CONFIG_MMC_DW_EXYNOS=y
+CONFIG_COMMON_CLK_MAX77686=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
@@ -79,6 +117,7 @@ CONFIG_ROMFS_FS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
@@ -87,6 +126,5 @@ CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
+CONFIG_CRYPTO_SHA256=y
CONFIG_CRC_CCITT=y
--
cgit v1.1
From 2d403f7b198163d14a37ab79de33e27e390bb3b1 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Thu, 30 May 2013 12:44:47 -0700
Subject: ARM: OMAP3: Fix iva2_pwrdm settings for 3703
Commit a819c4f1 (ARM: OMAP3: PM: Only access IVA if one exists)
changed PM to not access IVA registers on omaps that don't have
them. Turns out we still need to idle iva2 as otherwise
iva2_pwrdm will stay on and block deeper idle states.
It seems that the only part of the reset that may not be needed
is the setting of the iva2 boot mode to idle. But as that register
seems to be there and is harmless if no iva2 is on the SoC, it's
probably safest to do the complete reset.
Acked-by: Mark A. Greer <mgreer@animalcreek.com>
Acked-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/pm34xx.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index c018593..5a2d803 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -546,8 +546,10 @@ static void __init prcm_setup_regs(void)
/* Clear any pending PRCM interrupts */
omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
- if (omap3_has_iva())
- omap3_iva_idle();
+ /*
+ * We need to idle iva2_pwrdm even on am3703 with no iva2.
+ */
+ omap3_iva_idle();
omap3_d2d_idle();
}
--
cgit v1.1
From 13731d862cf5219216533a3b0de052cee4cc5038 Mon Sep 17 00:00:00 2001
From: Jongsung Kim <neidhard.kim@lge.com>
Date: Wed, 29 May 2013 22:07:39 -0600
Subject: ARM: bcm2835: override the HW UART periphid
Stephen Warren reported the recent commit 78506f2 (add support for
extended FIFO-size of PL011-r1p5) breaks the serial port on the
BCM2835 ARM SoC.
A UART compatible with the ARM PL011-r1p5 should have 32-deep FIFOs.
The BCM2835 UART just looks like an ARM PL011-r1p5, but has 16-deep
FIFOs just like PL011-r1p4 or earlier revisions. As a workaround for
this compatibility issue, this patch overrides the HW UART periphid
register values with the actually compatible UART periphid 0x00241011
(r1p3 or r1p4).
Reported-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Jongsung Kim <neidhard.kim@lge.com>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
---
arch/arm/boot/dts/bcm2835.dtsi | 1 +
1 file changed, 1 insertion(+)
(limited to 'arch/arm')
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index f0052dc..1e12aef 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -44,6 +44,7 @@
reg = <0x7e201000 0x1000>;
interrupts = <2 25>;
clock-frequency = <3000000>;
+ arm,primecell-periphid = <0x00241011>;
};
gpio: gpio {
--
cgit v1.1
From a08b9bc586a7810cdebbc316d5cbaed56a2a04a9 Mon Sep 17 00:00:00 2001
From: Anson Huang <b20788@freescale.com>
Date: Fri, 31 May 2013 17:01:54 -0400
Subject: ARM: imx: clk-imx6q: AXI clock select index is incorrect
The AXI clock mux should be as below:
00: periph;
01: pll2_pfd2_396m;
10: periph;
11: pll3_pfd1_540m;
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/mach-imx/clk-imx6q.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index ba2de54..4e3148c 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -181,7 +181,7 @@ static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy",
static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", };
static const char *periph_sels[] = { "periph_pre", "periph_clk2", };
static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", };
-static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "pll3_pfd1_540m", };
+static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", };
static const char *audio_sels[] = { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
static const char *gpu_axi_sels[] = { "axi", "ahb", };
static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", };
--
cgit v1.1
From e8180dcaa8470ceca21109f143876fdcd9fe050a Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@linaro.org>
Date: Thu, 9 May 2013 00:28:06 +0200
Subject: ARM: KVM: prevent NULL pointer dereferences with KVM VCPU ioctl
Some ARM KVM VCPU ioctls require the vCPU to be properly initialized
with the KVM_ARM_VCPU_INIT ioctl before being used with further
requests. KVM_RUN checks whether this initialization has been
done, but other ioctls do not.
Namely KVM_GET_REG_LIST will dereference an array with index -1
without initialization and thus leads to a kernel oops.
Fix this by adding checks before executing the ioctl handlers.
[ Removed superflous comment from static function - Christoffer ]
Changes from v1:
* moved check into a static function with a meaningful name
Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
---
arch/arm/kvm/arm.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
index 37d216d..ef1703b 100644
--- a/arch/arm/kvm/arm.c
+++ b/arch/arm/kvm/arm.c
@@ -492,6 +492,11 @@ static void vcpu_pause(struct kvm_vcpu *vcpu)
wait_event_interruptible(*wq, !vcpu->arch.pause);
}
+static int kvm_vcpu_initialized(struct kvm_vcpu *vcpu)
+{
+ return vcpu->arch.target >= 0;
+}
+
/**
* kvm_arch_vcpu_ioctl_run - the main VCPU run function to execute guest code
* @vcpu: The VCPU pointer
@@ -508,8 +513,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
int ret;
sigset_t sigsaved;
- /* Make sure they initialize the vcpu with KVM_ARM_VCPU_INIT */
- if (unlikely(vcpu->arch.target < 0))
+ if (unlikely(!kvm_vcpu_initialized(vcpu)))
return -ENOEXEC;
ret = kvm_vcpu_first_run_init(vcpu);
@@ -710,6 +714,10 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
case KVM_SET_ONE_REG:
case KVM_GET_ONE_REG: {
struct kvm_one_reg reg;
+
+ if (unlikely(!kvm_vcpu_initialized(vcpu)))
+ return -ENOEXEC;
+
if (copy_from_user(®, argp, sizeof(reg)))
return -EFAULT;
if (ioctl == KVM_SET_ONE_REG)
@@ -722,6 +730,9 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
struct kvm_reg_list reg_list;
unsigned n;
+ if (unlikely(!kvm_vcpu_initialized(vcpu)))
+ return -ENOEXEC;
+
if (copy_from_user(®_list, user_list, sizeof(reg_list)))
return -EFAULT;
n = reg_list.n;
--
cgit v1.1
From d4cb9df5d1f79950b34e78ec5d1b1b59d6e9c7b7 Mon Sep 17 00:00:00 2001
From: Marc Zyngier <marc.zyngier@arm.com>
Date: Tue, 14 May 2013 12:11:34 +0100
Subject: ARM: KVM: be more thorough when invalidating TLBs
The KVM/ARM MMU code doesn't take care of invalidating TLBs before
freeing a {pte,pmd} table. This could cause problems if the page
is reallocated and then speculated into by another CPU.
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
---
arch/arm/kvm/mmu.c | 41 ++++++++++++++++++++++++++---------------
1 file changed, 26 insertions(+), 15 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c
index 9657065..84ba67b 100644
--- a/arch/arm/kvm/mmu.c
+++ b/arch/arm/kvm/mmu.c
@@ -43,7 +43,14 @@ static phys_addr_t hyp_idmap_vector;
static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
{
- kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, kvm, ipa);
+ /*
+ * This function also gets called when dealing with HYP page
+ * tables. As HYP doesn't have an associated struct kvm (and
+ * the HYP page tables are fairly static), we don't do
+ * anything there.
+ */
+ if (kvm)
+ kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, kvm, ipa);
}
static int mmu_topup_memory_cache(struct kvm_mmu_memory_cache *cache,
@@ -78,18 +85,20 @@ static void *mmu_memory_cache_alloc(struct kvm_mmu_memory_cache *mc)
return p;
}
-static void clear_pud_entry(pud_t *pud)
+static void clear_pud_entry(struct kvm *kvm, pud_t *pud, phys_addr_t addr)
{
pmd_t *pmd_table = pmd_offset(pud, 0);
pud_clear(pud);
+ kvm_tlb_flush_vmid_ipa(kvm, addr);
pmd_free(NULL, pmd_table);
put_page(virt_to_page(pud));
}
-static void clear_pmd_entry(pmd_t *pmd)
+static void clear_pmd_entry(struct kvm *kvm, pmd_t *pmd, phys_addr_t addr)
{
pte_t *pte_table = pte_offset_kernel(pmd, 0);
pmd_clear(pmd);
+ kvm_tlb_flush_vmid_ipa(kvm, addr);
pte_free_kernel(NULL, pte_table);
put_page(virt_to_page(pmd));
}
@@ -100,11 +109,12 @@ static bool pmd_empty(pmd_t *pmd)
return page_count(pmd_page) == 1;
}
-static void clear_pte_entry(pte_t *pte)
+static void clear_pte_entry(struct kvm *kvm, pte_t *pte, phys_addr_t addr)
{
if (pte_present(*pte)) {
kvm_set_pte(pte, __pte(0));
put_page(virt_to_page(pte));
+ kvm_tlb_flush_vmid_ipa(kvm, addr);
}
}
@@ -114,7 +124,8 @@ static bool pte_empty(pte_t *pte)
return page_count(pte_page) == 1;
}
-static void unmap_range(pgd_t *pgdp, unsigned long long start, u64 size)
+static void unmap_range(struct kvm *kvm, pgd_t *pgdp,
+ unsigned long long start, u64 size)
{
pgd_t *pgd;
pud_t *pud;
@@ -138,15 +149,15 @@ static void unmap_range(pgd_t *pgdp, unsigned long long start, u64 size)
}
pte = pte_offset_kernel(pmd, addr);
- clear_pte_entry(pte);
+ clear_pte_entry(kvm, pte, addr);
range = PAGE_SIZE;
/* If we emptied the pte, walk back up the ladder */
if (pte_empty(pte)) {
- clear_pmd_entry(pmd);
+ clear_pmd_entry(kvm, pmd, addr);
range = PMD_SIZE;
if (pmd_empty(pmd)) {
- clear_pud_entry(pud);
+ clear_pud_entry(kvm, pud, addr);
range = PUD_SIZE;
}
}
@@ -165,14 +176,14 @@ void free_boot_hyp_pgd(void)
mutex_lock(&kvm_hyp_pgd_mutex);
if (boot_hyp_pgd) {
- unmap_range(boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE);
- unmap_range(boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE);
+ unmap_range(NULL, boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE);
+ unmap_range(NULL, boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE);
kfree(boot_hyp_pgd);
boot_hyp_pgd = NULL;
}
if (hyp_pgd)
- unmap_range(hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE);
+ unmap_range(NULL, hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE);
kfree(init_bounce_page);
init_bounce_page = NULL;
@@ -200,9 +211,10 @@ void free_hyp_pgds(void)
if (hyp_pgd) {
for (addr = PAGE_OFFSET; virt_addr_valid(addr); addr += PGDIR_SIZE)
- unmap_range(hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE);
+ unmap_range(NULL, hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE);
for (addr = VMALLOC_START; is_vmalloc_addr((void*)addr); addr += PGDIR_SIZE)
- unmap_range(hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE);
+ unmap_range(NULL, hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE);
+
kfree(hyp_pgd);
hyp_pgd = NULL;
}
@@ -393,7 +405,7 @@ int kvm_alloc_stage2_pgd(struct kvm *kvm)
*/
static void unmap_stage2_range(struct kvm *kvm, phys_addr_t start, u64 size)
{
- unmap_range(kvm->arch.pgd, start, size);
+ unmap_range(kvm, kvm->arch.pgd, start, size);
}
/**
@@ -675,7 +687,6 @@ static void handle_hva_to_gpa(struct kvm *kvm,
static void kvm_unmap_hva_handler(struct kvm *kvm, gpa_t gpa, void *data)
{
unmap_stage2_range(kvm, gpa, PAGE_SIZE);
- kvm_tlb_flush_vmid_ipa(kvm, gpa);
}
int kvm_unmap_hva(struct kvm *kvm, unsigned long hva)
--
cgit v1.1
From 768dc16397fb18c9de209cbcb84d890b8279faa7 Mon Sep 17 00:00:00 2001
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Tue, 28 May 2013 17:17:45 +0200
Subject: arm: omap2: fix AM33xx hwmod infos for UART2
The UART2 hwmod structure is pointing to the EDMA channels of UART1,
which doesn't look right. This patch fixes this by making the UART2
hwmod structure to a new structure that lists the EDMA channels to be
used by the UART2.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Vaibhav Hiremath <hvaibhav@ti.com>
[paul@pwsan.com: updated to apply]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 075f7cc..69337af 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -2007,6 +2007,13 @@ static struct omap_hwmod am33xx_uart1_hwmod = {
},
};
+/* uart2 */
+static struct omap_hwmod_dma_info uart2_edma_reqs[] = {
+ { .name = "tx", .dma_req = 28, },
+ { .name = "rx", .dma_req = 29, },
+ { .dma_req = -1 }
+};
+
static struct omap_hwmod_irq_info am33xx_uart2_irqs[] = {
{ .irq = 73 + OMAP_INTC_START, },
{ .irq = -1 },
@@ -2018,7 +2025,7 @@ static struct omap_hwmod am33xx_uart2_hwmod = {
.clkdm_name = "l4ls_clkdm",
.flags = HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = am33xx_uart2_irqs,
- .sdma_reqs = uart1_edma_reqs,
+ .sdma_reqs = uart2_edma_reqs,
.main_clk = "dpll_per_m2_div4_ck",
.prcm = {
.omap4 = {
--
cgit v1.1
From 00dddcaa51f997cdc6dbae3303a31024e29a0fc0 Mon Sep 17 00:00:00 2001
From: Lars Poeschel <poeschel@lemonage.de>
Date: Tue, 28 May 2013 10:24:57 +0200
Subject: ARM: dts: AM33xx: Fix properties on gpmc node
The gpmc driver is actually looking for "gpmc,num-cs" and
"gpmc,num-waitpins" properties in DT. The binding doc also states
this.
Correct the properties in the dts to provide the right values for the
gpmc driver.
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
---
arch/arm/boot/dts/am33xx.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 1460d9b..8e1248f 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -409,8 +409,8 @@
ti,hwmods = "gpmc";
reg = <0x50000000 0x2000>;
interrupts = <100>;
- num-cs = <7>;
- num-waitpins = <2>;
+ gpmc,num-cs = <7>;
+ gpmc,num-waitpins = <2>;
#address-cells = <2>;
#size-cells = <1>;
status = "disabled";
--
cgit v1.1
From 1e68f43b7dcf0e5eee10baeb3cbe4e1ca59db9fd Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@linaro.org>
Date: Fri, 24 May 2013 17:24:21 -0700
Subject: ARM: dts: omap4-panda|sdp: Fix mux for twl6030 IRQ pin and msecure
line
Earlier commits ensured proper muxing of pins related to proper
TWL6030 behavior: see commit 265a2bc8 (ARM: OMAP3: TWL4030: ensure
sys_nirq1 is mux'd and wakeup enabled) and commit 1ef43369 (ARM:
OMAP4: TWL: mux sys_drm_msecure as output for PMIC).
However these only fixed legacy boot and not DT boot. For DT boot,
the default mux values need to be set properly in DT.
Special thanks to Nishanth Menon for the review and catching some
major flaws in earlier versions.
Tested on OMAP4430/Panda and OMAP4460/Panda-ES.
Cc: Nishanth Menon <nm@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Acked-by: Grygorii Strashko <grygorii.strashko@ti.com>
[benoit.cousson@linaro.org: Slightly change the subject to align
board name with file name]
Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
---
arch/arm/boot/dts/omap4-panda-common.dtsi | 20 ++++++++++++++++++++
arch/arm/boot/dts/omap4-sdp.dts | 20 ++++++++++++++++++++
2 files changed, 40 insertions(+)
(limited to 'arch/arm')
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 03bd60d..eeb734e 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -56,9 +56,23 @@
};
};
+&omap4_pmx_wkup {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &twl6030_wkup_pins
+ >;
+
+ twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
+ pinctrl-single,pins = <
+ 0x14 0x2 /* fref_clk0_out.sys_drm_msecure OUTPUT | MODE2 */
+ >;
+ };
+};
+
&omap4_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
+ &twl6030_pins
&twl6040_pins
&mcpdm_pins
&mcbsp1_pins
@@ -66,6 +80,12 @@
&tpd12s015_pins
>;
+ twl6030_pins: pinmux_twl6030_pins {
+ pinctrl-single,pins = <
+ 0x15e 0x4118 /* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */
+ >;
+ };
+
twl6040_pins: pinmux_twl6040_pins {
pinctrl-single,pins = <
0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index a35d9cd..98505a2 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -142,9 +142,23 @@
};
};
+&omap4_pmx_wkup {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &twl6030_wkup_pins
+ >;
+
+ twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
+ pinctrl-single,pins = <
+ 0x14 0x2 /* fref_clk0_out.sys_drm_msecure OUTPUT | MODE2 */
+ >;
+ };
+};
+
&omap4_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
+ &twl6030_pins
&twl6040_pins
&mcpdm_pins
&dmic_pins
@@ -179,6 +193,12 @@
>;
};
+ twl6030_pins: pinmux_twl6030_pins {
+ pinctrl-single,pins = <
+ 0x15e 0x4118 /* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */
+ >;
+ };
+
twl6040_pins: pinmux_twl6040_pins {
pinctrl-single,pins = <
0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */
--
cgit v1.1
From 8341613afbc8d65bca8c81158edfb49f36b7ad92 Mon Sep 17 00:00:00 2001
From: Suman Anna <s-anna@ti.com>
Date: Wed, 17 Apr 2013 18:23:15 -0500
Subject: ARM: dts: OMAP5: Fix missing PWM capability to timer nodes
OMAP5 has 6 timers (GPTimers 5, 6, 8 to 11) that are capable of PWM.
The PWM capability property is missing from the node definitions of
couple of timers.
Add ti,timer-pwm attribute for timer 5, 6, 8 and 11.
Signed-off-by: Suman Anna <s-anna@ti.com>
[benoit.cousson@linaro.org: Update changelog and subject to highlight
the fix]
Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
---
arch/arm/boot/dts/omap5.dtsi | 3 +++
1 file changed, 3 insertions(+)
(limited to 'arch/arm')
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 3dd7ff8..635cae2 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -538,6 +538,7 @@
interrupts = <0 41 0x4>;
ti,hwmods = "timer5";
ti,timer-dsp;
+ ti,timer-pwm;
};
timer6: timer@4013a000 {
@@ -574,6 +575,7 @@
reg = <0x4803e000 0x80>;
interrupts = <0 45 0x4>;
ti,hwmods = "timer9";
+ ti,timer-pwm;
};
timer10: timer@48086000 {
@@ -581,6 +583,7 @@
reg = <0x48086000 0x80>;
interrupts = <0 46 0x4>;
ti,hwmods = "timer10";
+ ti,timer-pwm;
};
timer11: timer@48088000 {
--
cgit v1.1
From 5600a8485603b240790005b9b58de4c4f6ada69d Mon Sep 17 00:00:00 2001
From: Simon Horman <horms+renesas@verge.net.au>
Date: Wed, 22 May 2013 19:47:05 +0900
Subject: ARM: shmobile: sh73a0: Update CMT clockevent rating to 80
Update the CMT clockevent rating from 125 to 80.
This resolves a boot-failure regression for kzm9g-reference in v3.10-rc1
introduced by f7db706b132f11c79ae1d74b2382e0926cf31644 ("ARM: 7674/1: smp:
Avoid dummy clockevent being preferred over real").
The patch noted above reduces the rating of dummy clockevent from 400 to 100.
This patch reduces the rating of CMT so that it is once again less than that
of the dummy clockevent.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/mach-shmobile/setup-sh73a0.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index fdf3894..9696f36 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -252,7 +252,7 @@ static struct sh_timer_config cmt10_platform_data = {
.name = "CMT10",
.channel_offset = 0x10,
.timer_bit = 0,
- .clockevent_rating = 125,
+ .clockevent_rating = 80,
.clocksource_rating = 125,
};
--
cgit v1.1
From 275236797916924103e133e3d7a7ea777c951273 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nicolas.pitre@linaro.org>
Date: Wed, 29 May 2013 16:57:30 +0100
Subject: ARM: 7737/1: fix kernel decompressor compilation error with
CONFIG_DEBUG_SEMIHOSTING
Selecting this option produces:
AS arch/arm/boot/compressed/debug.o
arch/arm/boot/compressed/debug.S:4:33: fatal error: mach/debug-macro.S: No such file or directory
compilation terminated.
make[3]: *** [arch/arm/boot/compressed/debug.o] Error 1
The semihosting support cannot be modelled into a senduart macro as
it requires memory space for argument passing. So the
CONFIG_DEBUG_LL_INCLUDE may not have any sensible value and the include
directive should be omitted.
While at it, let's add proper semihosting output support to the
decompressor.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
arch/arm/boot/compressed/debug.S | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
(limited to 'arch/arm')
diff --git a/arch/arm/boot/compressed/debug.S b/arch/arm/boot/compressed/debug.S
index 6e8382d..5392ee6 100644
--- a/arch/arm/boot/compressed/debug.S
+++ b/arch/arm/boot/compressed/debug.S
@@ -1,6 +1,8 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
+#ifndef CONFIG_DEBUG_SEMIHOSTING
+
#include CONFIG_DEBUG_LL_INCLUDE
ENTRY(putc)
@@ -10,3 +12,29 @@ ENTRY(putc)
busyuart r3, r1
mov pc, lr
ENDPROC(putc)
+
+#else
+
+ENTRY(putc)
+ adr r1, 1f
+ ldmia r1, {r2, r3}
+ add r2, r2, r1
+ ldr r1, [r2, r3]
+ strb r0, [r1]
+ mov r0, #0x03 @ SYS_WRITEC
+ ARM( svc #0x123456 )
+ THUMB( svc #0xab )
+ mov pc, lr
+ .align 2
+1: .word _GLOBAL_OFFSET_TABLE_ - .
+ .word semi_writec_buf(GOT)
+ENDPROC(putc)
+
+ .bss
+ .global semi_writec_buf
+ .type semi_writec_buf, %object
+semi_writec_buf:
+ .space 4
+ .size semi_writec_buf, 4
+
+#endif
--
cgit v1.1
From 92bdd3f5eba299b33c2f4407977d6fa2e2a6a0da Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Fri, 31 May 2013 22:49:22 +0100
Subject: ARM: 7742/1: topology: export cpu_topology
The cpu_topology symbol is required by any driver using the topology
interfaces, which leads to a couple of build errors:
ERROR: "cpu_topology" [drivers/net/ethernet/sfc/sfc.ko] undefined!
ERROR: "cpu_topology" [drivers/cpufreq/arm_big_little.ko] undefined!
ERROR: "cpu_topology" [drivers/block/mtip32xx/mtip32xx.ko] undefined!
The obvious solution is to export this symbol.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: stable@vger.kernel.org
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
arch/arm/kernel/topology.c | 2 ++
1 file changed, 2 insertions(+)
(limited to 'arch/arm')
diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c
index f10316b..c5a5954 100644
--- a/arch/arm/kernel/topology.c
+++ b/arch/arm/kernel/topology.c
@@ -13,6 +13,7 @@
#include <linux/cpu.h>
#include <linux/cpumask.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/percpu.h>
#include <linux/node.h>
@@ -200,6 +201,7 @@ static inline void update_cpu_power(unsigned int cpuid, unsigned int mpidr) {}
* cpu topology table
*/
struct cputopo_arm cpu_topology[NR_CPUS];
+EXPORT_SYMBOL_GPL(cpu_topology);
const struct cpumask *cpu_coregroup_mask(int cpu)
{
--
cgit v1.1
From da94a829305f1c217cfdf6771cb1faca0917e3b9 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Fri, 31 May 2013 22:50:47 +0100
Subject: ARM: 7743/1: compressed/head.S: work around new binutils warning
In August 2012, Matthew Gretton-Dann checked a change into binutils
labelled "Error on obsolete & warn on deprecated registers", apparently as
part of ARMv8 support. Apparently, this was supposed to emit the message
"Warning: This coprocessor register access is deprecated in ARMv8" when
using certain mcr/mrc instructions and building for ARMv8. Unfortunately,
the message that is actually emitted appears to be '(null)', which is
less helpful in comparison.
Even more unfortunately, this is biting us on every single kernel
build with a new gas, because arch/arm/boot/compressed/head.S and some
other files in that directory are built with -march=all since kernel
commit 80cec14a8 "[ARM] Add -march=all to assembly file build in
arch/arm/boot/compressed" back in v2.6.28.
This patch reverts Russell's nice solution and instead marks the head.S
file to be built for armv7-a, which fortunately lets us build all
instructions in that file without warnings even on the broken binutils.
Without this patch, building anything results in:
arch/arm/boot/compressed/head.S: Assembler messages:
arch/arm/boot/compressed/head.S:565: Warning: (null)
arch/arm/boot/compressed/head.S:676: Warning: (null)
arch/arm/boot/compressed/head.S:698: Warning: (null)
arch/arm/boot/compressed/head.S:722: Warning: (null)
arch/arm/boot/compressed/head.S:726: Warning: (null)
arch/arm/boot/compressed/head.S:957: Warning: (null)
arch/arm/boot/compressed/head.S:996: Warning: (null)
arch/arm/boot/compressed/head.S:997: Warning: (null)
arch/arm/boot/compressed/head.S:1027: Warning: (null)
arch/arm/boot/compressed/head.S:1035: Warning: (null)
arch/arm/boot/compressed/head.S:1046: Warning: (null)
arch/arm/boot/compressed/head.S:1060: Warning: (null)
arch/arm/boot/compressed/head.S:1092: Warning: (null)
arch/arm/boot/compressed/head.S:1094: Warning: (null)
arch/arm/boot/compressed/head.S:1095: Warning: (null)
arch/arm/boot/compressed/head.S:1102: Warning: (null)
arch/arm/boot/compressed/head.S:1134: Warning: (null)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org
Cc: Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
arch/arm/boot/compressed/Makefile | 2 +-
arch/arm/boot/compressed/head-sa1100.S | 1 +
arch/arm/boot/compressed/head-shark.S | 1 +
arch/arm/boot/compressed/head.S | 1 +
4 files changed, 4 insertions(+), 1 deletion(-)
(limited to 'arch/arm')
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 3580d57..79e9bdb 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -124,7 +124,7 @@ KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
endif
ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj)
-asflags-y := -Wa,-march=all -DZIMAGE
+asflags-y := -DZIMAGE
# Supply kernel BSS size to the decompressor via a linker symbol.
KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \
diff --git a/arch/arm/boot/compressed/head-sa1100.S b/arch/arm/boot/compressed/head-sa1100.S
index 6179d94..3115e31 100644
--- a/arch/arm/boot/compressed/head-sa1100.S
+++ b/arch/arm/boot/compressed/head-sa1100.S
@@ -11,6 +11,7 @@
#include <asm/mach-types.h>
.section ".start", "ax"
+ .arch armv4
__SA1100_start:
diff --git a/arch/arm/boot/compressed/head-shark.S b/arch/arm/boot/compressed/head-shark.S
index 089c560..92b5689 100644
--- a/arch/arm/boot/compressed/head-shark.S
+++ b/arch/arm/boot/compressed/head-shark.S
@@ -18,6 +18,7 @@
.section ".start", "ax"
+ .arch armv4
b __beginning
__ofw_data: .long 0 @ the number of memory blocks
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index fe4d9c3..6938559 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -11,6 +11,7 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
+ .arch armv7-a
/*
* Debugging stuff
*
--
cgit v1.1
From ced2a3b84965f1be8b6a142d6029faf241f109af Mon Sep 17 00:00:00 2001
From: Marc C <marc.ceeeee@gmail.com>
Date: Wed, 5 Jun 2013 22:02:23 +0100
Subject: ARM: 7750/1: update legacy CPU ID in decompressor cache support jump
table
The previous mask values for the legacy ARM CPU IDs were conflicting
with the CPU ID assignments for late-generation CPUs (like the
Qualcomm MSM/QSD or Broadcom Brahma-15 processors). This change
corrects the legacy ARM CPU ID value so that the jump table can
fall-through to the appropriate cache maintenance / MMU functions.
Signed-off-by: Marc C <marc.ceeeee@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
arch/arm/boot/compressed/head.S | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 6938559..032a8d9 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -806,8 +806,8 @@ call_cache_fn: adr r12, proc_types
.align 2
.type proc_types,#object
proc_types:
- .word 0x00000000 @ old ARM ID
- .word 0x0000f000
+ .word 0x41000000 @ old ARM ID
+ .word 0xff00f000
mov pc, lr
THUMB( nop )
mov pc, lr
--
cgit v1.1
From 509eb76ebf9771abc9fe51859382df2571f11447 Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Wed, 5 Jun 2013 11:20:33 +0100
Subject: ARM: 7747/1: pcpu: ensure __my_cpu_offset cannot be re-ordered across
barrier()
__my_cpu_offset is non-volatile, since we want its value to be cached
when we access several per-cpu variables in a row with preemption
disabled. This means that we rely on preempt_{en,dis}able to hazard
with the operation via the barrier() macro, so that we can't end up
migrating CPUs without reloading the per-cpu offset.
Unfortunately, GCC doesn't treat a "memory" clobber on a non-volatile
asm block as a side-effect, and will happily re-order it before other
memory clobbers (including those in prempt_disable()) and cache the
value. This has been observed to break the cmpxchg logic in the slub
allocator, leading to livelock in kmem_cache_alloc in mainline kernels.
This patch adds a dummy memory input operand to __my_cpu_offset,
forcing it to be ordered with respect to the barrier() macro.
Cc: <stable@vger.kernel.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
arch/arm/include/asm/percpu.h | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/include/asm/percpu.h b/arch/arm/include/asm/percpu.h
index 968c0a1..209e650 100644
--- a/arch/arm/include/asm/percpu.h
+++ b/arch/arm/include/asm/percpu.h
@@ -30,8 +30,15 @@ static inline void set_my_cpu_offset(unsigned long off)
static inline unsigned long __my_cpu_offset(void)
{
unsigned long off;
- /* Read TPIDRPRW */
- asm("mrc p15, 0, %0, c13, c0, 4" : "=r" (off) : : "memory");
+ register unsigned long *sp asm ("sp");
+
+ /*
+ * Read TPIDRPRW.
+ * We want to allow caching the value, so avoid using volatile and
+ * instead use a fake stack read to hazard against barrier().
+ */
+ asm("mrc p15, 0, %0, c13, c0, 4" : "=r" (off) : "Q" (*sp));
+
return off;
}
#define __my_cpu_offset __my_cpu_offset()
--
cgit v1.1
From 29eb77825cc7da8d45b642de2de3d423dc8a363f Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <peterz@infradead.org>
Date: Wed, 5 Jun 2013 12:26:50 +0200
Subject: arch, mm: Remove tlb_fast_mode()
Since the introduction of preemptible mmu_gather TLB fast mode has been
broken. TLB fast mode relies on there being absolutely no concurrency;
it frees pages first and invalidates TLBs later.
However now we can get concurrency and stuff goes *bang*.
This patch removes all tlb_fast_mode() code; it was found the better
option vs trying to patch the hole by entangling tlb invalidation with
the scheduler.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tony Luck <tony.luck@intel.com>
Reported-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
arch/arm/include/asm/tlb.h | 27 ++++-----------------------
1 file changed, 4 insertions(+), 23 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
index 99a1951..bdf2b84 100644
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -33,18 +33,6 @@
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
-/*
- * We need to delay page freeing for SMP as other CPUs can access pages
- * which have been removed but not yet had their TLB entries invalidated.
- * Also, as ARMv7 speculative prefetch can drag new entries into the TLB,
- * we need to apply this same delaying tactic to ensure correct operation.
- */
-#if defined(CONFIG_SMP) || defined(CONFIG_CPU_32v7)
-#define tlb_fast_mode(tlb) 0
-#else
-#define tlb_fast_mode(tlb) 1
-#endif
-
#define MMU_GATHER_BUNDLE 8
/*
@@ -112,12 +100,10 @@ static inline void __tlb_alloc_page(struct mmu_gather *tlb)
static inline void tlb_flush_mmu(struct mmu_gather *tlb)
{
tlb_flush(tlb);
- if (!tlb_fast_mode(tlb)) {
- free_pages_and_swap_cache(tlb->pages, tlb->nr);
- tlb->nr = 0;
- if (tlb->pages == tlb->local)
- __tlb_alloc_page(tlb);
- }
+ free_pages_and_swap_cache(tlb->pages, tlb->nr);
+ tlb->nr = 0;
+ if (tlb->pages == tlb->local)
+ __tlb_alloc_page(tlb);
}
static inline void
@@ -178,11 +164,6 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
static inline int __tlb_remove_page(struct mmu_gather *tlb, struct page *page)
{
- if (tlb_fast_mode(tlb)) {
- free_page_and_swap_cache(page);
- return 1; /* avoid calling tlb_flush_mmu */
- }
-
tlb->pages[tlb->nr++] = page;
VM_BUG_ON(tlb->nr > tlb->max);
return tlb->max - tlb->nr;
--
cgit v1.1
From a93d8a1cea0899982993e9a93404c6f78b123697 Mon Sep 17 00:00:00 2001
From: Jean-Philippe Francois <jp.francois@cynove.com>
Date: Thu, 6 Jun 2013 08:48:07 -0600
Subject: ARM: omap3: clock: fix wrong container_of in clock36xx.c
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
omap36xx_pwrdn_clk_enable_with_hsdiv_restore expects the parent hw of
the clock to be a clk_hw_omap. However, looking at cclock3xxx_data.c,
all concerned clock have parent defined as clk_divider. Fix the
function to use clk_divider. Tested with 3.9 on dm3730.
Signed-off-by: Jean-Philippe François <jp.francois@cynove.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/clock36xx.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-omap2/clock36xx.c b/arch/arm/mach-omap2/clock36xx.c
index 8f3bf4e..bbd6a3f 100644
--- a/arch/arm/mach-omap2/clock36xx.c
+++ b/arch/arm/mach-omap2/clock36xx.c
@@ -20,11 +20,12 @@
#include <linux/kernel.h>
#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/io.h>
#include "clock.h"
#include "clock36xx.h"
-
+#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw)
/**
* omap36xx_pwrdn_clk_enable_with_hsdiv_restore - enable clocks suffering
@@ -39,29 +40,28 @@
*/
int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *clk)
{
- struct clk_hw_omap *parent;
+ struct clk_divider *parent;
struct clk_hw *parent_hw;
- u32 dummy_v, orig_v, clksel_shift;
+ u32 dummy_v, orig_v;
int ret;
/* Clear PWRDN bit of HSDIVIDER */
ret = omap2_dflt_clk_enable(clk);
parent_hw = __clk_get_hw(__clk_get_parent(clk->clk));
- parent = to_clk_hw_omap(parent_hw);
+ parent = to_clk_divider(parent_hw);
/* Restore the dividers */
if (!ret) {
- clksel_shift = __ffs(parent->clksel_mask);
- orig_v = __raw_readl(parent->clksel_reg);
+ orig_v = __raw_readl(parent->reg);
dummy_v = orig_v;
/* Write any other value different from the Read value */
- dummy_v ^= (1 << clksel_shift);
- __raw_writel(dummy_v, parent->clksel_reg);
+ dummy_v ^= (1 << parent->shift);
+ __raw_writel(dummy_v, parent->reg);
/* Write the original divider */
- __raw_writel(orig_v, parent->clksel_reg);
+ __raw_writel(orig_v, parent->reg);
}
return ret;
--
cgit v1.1
From 4089fe95bfed295c8ad38251d5fe02b6b0ba684c Mon Sep 17 00:00:00 2001
From: Nicolas Schichan <nschichan@freebox.fr>
Date: Thu, 6 Jun 2013 19:00:46 +0200
Subject: ARM: Kirkwood: handle mv88f6282 cpu in __kirkwood_variant().
MPP_F6281_MASK would be previously be returned when on mv88f6282,
which would disallow some valid MPP configurations.
Commit 830f8b91 (arm: plat-orion: fix printing of "MPP config
unavailable on this hardware") made this problem visible as an invalid
MPP configuration is now correctly detected and not applied.
Signed-off-by: Nicolas Schichan <nschichan@freebox.fr>
Cc: <stable@vger.kernel.org> # v3.9.x
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
---
arch/arm/mach-kirkwood/mpp.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
index 827cde4..e96fd71 100644
--- a/arch/arm/mach-kirkwood/mpp.c
+++ b/arch/arm/mach-kirkwood/mpp.c
@@ -22,9 +22,10 @@ static unsigned int __init kirkwood_variant(void)
kirkwood_pcie_id(&dev, &rev);
- if ((dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0) ||
- (dev == MV88F6282_DEV_ID))
+ if (dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0)
return MPP_F6281_MASK;
+ if (dev == MV88F6282_DEV_ID)
+ return MPP_F6282_MASK;
if (dev == MV88F6192_DEV_ID && rev >= MV88F6192_REV_A0)
return MPP_F6192_MASK;
if (dev == MV88F6180_DEV_ID)
--
cgit v1.1
From 5f1f3d5088316f827591764aa6a5e7161eb514bd Mon Sep 17 00:00:00 2001
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Thu, 6 Jun 2013 11:21:23 +0200
Subject: arm: mvebu: armada-xp-{gp,openblocks-ax3-4}: specify PCIe range
The ranges DT entry needed by the PCIe controller is defined at the
SoC .dtsi level. However, some boards have a NOR flash, and to support
it, they need to override the SoC-level ranges property to add an
additional range. Since PCIe and NOR support came separately, some
boards were not properly changed to include the PCIe range in their
ranges property at the .dts level.
This commit fixes those platforms.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
---
arch/arm/boot/dts/armada-xp-gp.dts | 5 +++--
arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 5 +++--
2 files changed, 6 insertions(+), 4 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 3ee63d1..76db557 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -39,8 +39,9 @@
};
soc {
- ranges = <0 0 0xd0000000 0x100000
- 0xf0000000 0 0xf0000000 0x1000000>;
+ ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */
+ 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */
+ 0xf0000000 0 0xf0000000 0x1000000 /* Device Bus, NOR 16MiB */>;
internal-regs {
serial@12000 {
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index 46b7850..fdea75c 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -27,8 +27,9 @@
};
soc {
- ranges = <0 0 0xd0000000 0x100000
- 0xf0000000 0 0xf0000000 0x8000000>;
+ ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */
+ 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */
+ 0xf0000000 0 0xf0000000 0x8000000 /* Device Bus, NOR 128MiB */>;
internal-regs {
serial@12000 {
--
cgit v1.1
From 437d8ac510b90610da814ae25a7b79aaf3b4910f Mon Sep 17 00:00:00 2001
From: Tushar Behera <tushar.behera@linaro.org>
Date: Tue, 4 Jun 2013 09:49:10 +0530
Subject: ARM: EXYNOS: uncompress - print debug messages if DEBUG_LL is defined
Printing low-level debug messages make an assumption that the specified
UART port has been preconfigured by the bootloader. Incorrectly
specified UART port results in system getting stalled while printing the
message "Uncompressing Linux... done, booting the kernel"
This UART port number is specified through S3C_LOWLEVEL_UART_PORT. Since
the UART port might different for different board, it is not possible to
specify it correctly for every board that use a common defconfig file.
Calling this print subroutine only when DEBUG_LL fixes the problem. By
disabling DEBUG_LL in default config file, we would be able to boot
multiple boards with different default UART ports.
With this current approach, we miss the print "Uncompressing Linux...
done, booting the kernel." when DEBUG_LL is not defined.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
---
arch/arm/plat-samsung/include/plat/uncompress.h | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
(limited to 'arch/arm')
diff --git a/arch/arm/plat-samsung/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h
index 438b248..02b66d7 100644
--- a/arch/arm/plat-samsung/include/plat/uncompress.h
+++ b/arch/arm/plat-samsung/include/plat/uncompress.h
@@ -66,6 +66,9 @@ uart_rd(unsigned int reg)
static void putc(int ch)
{
+ if (!config_enabled(CONFIG_DEBUG_LL))
+ return;
+
if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
int level;
@@ -118,7 +121,12 @@ static void arch_decomp_error(const char *x)
#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO
static inline void arch_enable_uart_fifo(void)
{
- u32 fifocon = uart_rd(S3C2410_UFCON);
+ u32 fifocon;
+
+ if (!config_enabled(CONFIG_DEBUG_LL))
+ return;
+
+ fifocon = uart_rd(S3C2410_UFCON);
if (!(fifocon & S3C2410_UFCON_FIFOMODE)) {
fifocon |= S3C2410_UFCON_RESETBOTH;
--
cgit v1.1
From 9c1fcdccc7ce5611ec1edf45dbbe51b10e333bd3 Mon Sep 17 00:00:00 2001
From: Doug Anderson <dianders@chromium.org>
Date: Wed, 5 Jun 2013 13:56:33 -0700
Subject: ARM: exynos: add debug_ll_io_init() call in exynos_init_io()
If the early MMU mapping of the UART happens to get booted out of the
TLB between the start of paging_init() and when we finally re-add the
UART at the very end of s3c_init_cpu(), we'll get a hang at bootup if
we've got early_printk enabled. Avoid this hang by calling
debug_ll_io_init() early.
Without this patch, you can reliably reproduce a hang when early
printk is enabled by adding flush_tlb_all() at the start of
exynos_init_io(). After this patch the hang goes away.
Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
---
arch/arm/mach-exynos/common.c | 2 ++
1 file changed, 2 insertions(+)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 027c9e7..f7e504b 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -386,6 +386,8 @@ int __init exynos_fdt_map_chipid(unsigned long node, const char *uname,
void __init exynos_init_io(struct map_desc *mach_desc, int size)
{
+ debug_ll_io_init();
+
#ifdef CONFIG_OF
if (initial_boot_params)
of_scan_flat_dt(exynos_fdt_map_chipid, NULL);
--
cgit v1.1
From 7e5955db458b2d349a8180242afebc78a13ed023 Mon Sep 17 00:00:00 2001
From: Haojian Zhuang <haojian.zhuang@linaro.org>
Date: Fri, 7 Jun 2013 11:17:07 +0800
Subject: ARM: prima2: fix incorrect panic usage
In prima2, some functions of checking DT is registered in initcall
level. If it doesn't match the compatible name of sirf, kernel
will panic. It blocks the usage of multiplatform on other verndor.
The error message is in below.
Knic - not syncing: unable to find compatible pwrc node in dtb
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0-rc3-00006-gd7f26ea-dirty #86
[<c0013adc>] (unwind_backtrace+0x0/0xf8) from [<c0011430>] (show_stack+0x10/0x1)
[<c0011430>] (show_stack+0x10/0x14) from [<c026f724>] (panic+0x90/0x1e8)
[<c026f724>] (panic+0x90/0x1e8) from [<c03267fc>] (sirfsoc_of_pwrc_init+0x24/0x)
[<c03267fc>] (sirfsoc_of_pwrc_init+0x24/0x58) from [<c0320864>] (do_one_initcal)
[<c0320864>] (do_one_initcall+0x90/0x150) from [<c0320a20>] (kernel_init_freeab)
[<c0320a20>] (kernel_init_freeable+0xfc/0x1c4) from [<c026b9e8>] (kernel_init+0)
[<c026b9e8>] (kernel_init+0x8/0xe4) from [<c000e158>] (ret_from_fork+0x14/0x3c)
Signen-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
---
arch/arm/mach-prima2/pm.c | 6 ++++--
arch/arm/mach-prima2/rstc.c | 6 ++++--
2 files changed, 8 insertions(+), 4 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c
index 9936c18..8f595c0 100644
--- a/arch/arm/mach-prima2/pm.c
+++ b/arch/arm/mach-prima2/pm.c
@@ -101,8 +101,10 @@ static int __init sirfsoc_of_pwrc_init(void)
struct device_node *np;
np = of_find_matching_node(NULL, pwrc_ids);
- if (!np)
- panic("unable to find compatible pwrc node in dtb\n");
+ if (!np) {
+ pr_err("unable to find compatible sirf pwrc node in dtb\n");
+ return -ENOENT;
+ }
/*
* pwrc behind rtciobrg is not located in memory space
diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c
index 435019c..d5e0cbc 100644
--- a/arch/arm/mach-prima2/rstc.c
+++ b/arch/arm/mach-prima2/rstc.c
@@ -28,8 +28,10 @@ static int __init sirfsoc_of_rstc_init(void)
struct device_node *np;
np = of_find_matching_node(NULL, rstc_ids);
- if (!np)
- panic("unable to find compatible rstc node in dtb\n");
+ if (!np) {
+ pr_err("unable to find compatible sirf rstc node in dtb\n");
+ return -ENOENT;
+ }
sirfsoc_rstc_base = of_iomap(np, 0);
if (!sirfsoc_rstc_base)
--
cgit v1.1
From cd3fc1b9a34e535a8acbead7461475fbc43bdd49 Mon Sep 17 00:00:00 2001
From: Tomasz Figa <t.figa@samsung.com>
Date: Fri, 17 May 2013 18:24:29 +0200
Subject: ARM: SAMSUNG: pm: Adjust for pinctrl- and DT-enabled platforms
This patch makes legacy code on suspend/resume path being executed
conditionally, on non-DT platforms only, to fix suspend/resume of
DT-enabled systems, for which the code is inappropriate.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[olof: add #include <linux/of.h>]
Signed-off-by: Olof Johansson <olof@lixom.net>
---
arch/arm/plat-samsung/pm.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
(limited to 'arch/arm')
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index 53210ec..bd7124c 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -16,6 +16,7 @@
#include <linux/suspend.h>
#include <linux/errno.h>
#include <linux/delay.h>
+#include <linux/of.h>
#include <linux/serial_core.h>
#include <linux/io.h>
@@ -261,7 +262,8 @@ static int s3c_pm_enter(suspend_state_t state)
* require a full power-cycle)
*/
- if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
+ if (!of_have_populated_dt() &&
+ !any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
!any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
printk(KERN_ERR "%s: No wake-up sources!\n", __func__);
printk(KERN_ERR "%s: Aborting sleep\n", __func__);
@@ -270,8 +272,11 @@ static int s3c_pm_enter(suspend_state_t state)
/* save all necessary core registers not covered by the drivers */
- samsung_pm_save_gpios();
- samsung_pm_saved_gpios();
+ if (!of_have_populated_dt()) {
+ samsung_pm_save_gpios();
+ samsung_pm_saved_gpios();
+ }
+
s3c_pm_save_uarts();
s3c_pm_save_core();
@@ -310,8 +315,11 @@ static int s3c_pm_enter(suspend_state_t state)
s3c_pm_restore_core();
s3c_pm_restore_uarts();
- samsung_pm_restore_gpios();
- s3c_pm_restored_gpios();
+
+ if (!of_have_populated_dt()) {
+ samsung_pm_restore_gpios();
+ s3c_pm_restored_gpios();
+ }
s3c_pm_debug_init();
--
cgit v1.1