From ed23db32271997e03ea59d31839a40470a1c434b Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Mon, 5 Oct 2009 01:27:14 -0300 Subject: [media] xc4000: get rid of hard-coded 8MHz firmware config Remove a hack I had put in to force the firmware to be 8MHz, now setting the firmware properly based on the target standard. Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/xc4000.c | 91 ++++++++++++++++++++---------------- 1 file changed, 51 insertions(+), 40 deletions(-) (limited to 'drivers/media/common') diff --git a/drivers/media/common/tuners/xc4000.c b/drivers/media/common/tuners/xc4000.c index b3b33d2..1263bfe 100644 --- a/drivers/media/common/tuners/xc4000.c +++ b/drivers/media/common/tuners/xc4000.c @@ -174,25 +174,29 @@ struct XC_TV_STANDARD { }; /* Tuner standards */ -#define MN_NTSC_PAL_BTSC 0 -#define MN_NTSC_PAL_A2 1 -#define MN_NTSC_PAL_EIAJ 2 -#define MN_NTSC_PAL_Mono 3 -#define BG_PAL_A2 4 -#define BG_PAL_NICAM 5 -#define BG_PAL_MONO 6 -#define I_PAL_NICAM 7 -#define I_PAL_NICAM_MONO 8 -#define DK_PAL_A2 9 -#define DK_PAL_NICAM 10 -#define DK_PAL_MONO 11 -#define DK_SECAM_A2DK1 12 -#define DK_SECAM_A2LDK3 13 -#define DK_SECAM_A2MONO 14 -#define L_SECAM_NICAM 15 -#define LC_SECAM_NICAM 16 -#define FM_Radio_INPUT2 21 -#define FM_Radio_INPUT1 22 +#define XC4000_MN_NTSC_PAL_BTSC 0 +#define XC4000_MN_NTSC_PAL_A2 1 +#define XC4000_MN_NTSC_PAL_EIAJ 2 +#define XC4000_MN_NTSC_PAL_Mono 3 +#define XC4000_BG_PAL_A2 4 +#define XC4000_BG_PAL_NICAM 5 +#define XC4000_BG_PAL_MONO 6 +#define XC4000_I_PAL_NICAM 7 +#define XC4000_I_PAL_NICAM_MONO 8 +#define XC4000_DK_PAL_A2 9 +#define XC4000_DK_PAL_NICAM 10 +#define XC4000_DK_PAL_MONO 11 +#define XC4000_DK_SECAM_A2DK1 12 +#define XC4000_DK_SECAM_A2LDK3 13 +#define XC4000_DK_SECAM_A2MONO 14 +#define XC4000_L_SECAM_NICAM 15 +#define XC4000_LC_SECAM_NICAM 16 +#define XC4000_DTV6 17 +#define XC4000_DTV8 18 +#define XC4000_DTV7_8 19 +#define XC4000_DTV7 20 +#define XC4000_FM_Radio_INPUT2 21 +#define XC4000_FM_Radio_INPUT1 22 /* WAS : static struct XC_TV_STANDARD XC4000_Standard[MAX_TV_STANDARD] = { @@ -1205,15 +1209,11 @@ static int xc4000_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) { struct xc4000_priv *priv = fe->tuner_priv; + unsigned int type; int ret; dprintk(1, "%s() frequency=%d (Hz)\n", __func__, params->frequency); - /* FIXME: setup proper parameters */ - if (check_firmware(fe, DTV8, 0, priv->if_khz) != XC_RESULT_SUCCESS) { - return -EREMOTEIO; - } - if (fe->ops.info.type == FE_ATSC) { dprintk(1, "%s() ATSC\n", __func__); switch (params->u.vsb.modulation) { @@ -1223,7 +1223,8 @@ static int xc4000_set_params(struct dvb_frontend *fe, priv->rf_mode = XC_RF_MODE_AIR; priv->freq_hz = params->frequency - 1750000; priv->bandwidth = BANDWIDTH_6_MHZ; - priv->video_standard = DTV6; + priv->video_standard = XC4000_DTV6; + type = DTV6; break; case QAM_64: case QAM_256: @@ -1232,7 +1233,8 @@ static int xc4000_set_params(struct dvb_frontend *fe, priv->rf_mode = XC_RF_MODE_CABLE; priv->freq_hz = params->frequency - 1750000; priv->bandwidth = BANDWIDTH_6_MHZ; - priv->video_standard = DTV6; + priv->video_standard = XC4000_DTV6; + type = DTV6; break; default: return -EINVAL; @@ -1242,16 +1244,19 @@ static int xc4000_set_params(struct dvb_frontend *fe, switch (params->u.ofdm.bandwidth) { case BANDWIDTH_6_MHZ: priv->bandwidth = BANDWIDTH_6_MHZ; - priv->video_standard = DTV6; + priv->video_standard = XC4000_DTV6; priv->freq_hz = params->frequency - 1750000; + type = DTV6; break; case BANDWIDTH_7_MHZ: printk(KERN_ERR "xc4000 bandwidth 7MHz not supported\n"); + type = DTV7; return -EINVAL; case BANDWIDTH_8_MHZ: priv->bandwidth = BANDWIDTH_8_MHZ; - priv->video_standard = DTV8; + priv->video_standard = XC4000_DTV8; priv->freq_hz = params->frequency - 2750000; + type = DTV8; break; default: printk(KERN_ERR "xc4000 bandwidth not set!\n"); @@ -1266,6 +1271,11 @@ static int xc4000_set_params(struct dvb_frontend *fe, dprintk(1, "%s() frequency=%d (compensated)\n", __func__, priv->freq_hz); + /* Make sure the correct firmware type is loaded */ + if (check_firmware(fe, type, 0, priv->if_khz) != XC_RESULT_SUCCESS) { + return -EREMOTEIO; + } + ret = xc_SetSignalSource(priv, priv->rf_mode); if (ret != XC_RESULT_SUCCESS) { printk(KERN_ERR @@ -1325,11 +1335,6 @@ static int xc4000_set_analog_params(struct dvb_frontend *fe, dprintk(1, "%s() frequency=%d (in units of 62.5khz)\n", __func__, params->frequency); - /* FIXME: setup proper parameters */ - if (check_firmware(fe, DTV8, 0, priv->if_khz) != XC_RESULT_SUCCESS) { - return -EREMOTEIO; - } - /* Fix me: it could be air. */ priv->rf_mode = params->mode; if (params->mode > XC_RF_MODE_CABLE) @@ -1343,45 +1348,51 @@ static int xc4000_set_analog_params(struct dvb_frontend *fe, */ if (params->std & V4L2_STD_MN) { /* default to BTSC audio standard */ - priv->video_standard = MN_NTSC_PAL_BTSC; + priv->video_standard = XC4000_MN_NTSC_PAL_BTSC; goto tune_channel; } if (params->std & V4L2_STD_PAL_BG) { /* default to NICAM audio standard */ - priv->video_standard = BG_PAL_NICAM; + priv->video_standard = XC4000_BG_PAL_NICAM; goto tune_channel; } if (params->std & V4L2_STD_PAL_I) { /* default to NICAM audio standard */ - priv->video_standard = I_PAL_NICAM; + priv->video_standard = XC4000_I_PAL_NICAM; goto tune_channel; } if (params->std & V4L2_STD_PAL_DK) { /* default to NICAM audio standard */ - priv->video_standard = DK_PAL_NICAM; + priv->video_standard = XC4000_DK_PAL_NICAM; goto tune_channel; } if (params->std & V4L2_STD_SECAM_DK) { /* default to A2 DK1 audio standard */ - priv->video_standard = DK_SECAM_A2DK1; + priv->video_standard = XC4000_DK_SECAM_A2DK1; goto tune_channel; } if (params->std & V4L2_STD_SECAM_L) { - priv->video_standard = L_SECAM_NICAM; + priv->video_standard = XC4000_L_SECAM_NICAM; goto tune_channel; } if (params->std & V4L2_STD_SECAM_LC) { - priv->video_standard = LC_SECAM_NICAM; + priv->video_standard = XC4000_LC_SECAM_NICAM; goto tune_channel; } tune_channel: + + /* FIXME - firmware type not being set properly */ + if (check_firmware(fe, DTV8, 0, priv->if_khz) != XC_RESULT_SUCCESS) { + return -EREMOTEIO; + } + ret = xc_SetSignalSource(priv, priv->rf_mode); if (ret != XC_RESULT_SUCCESS) { printk(KERN_ERR -- cgit v1.1