From 1fcb57d0f6e1150003d222051aaaf4bc4a9ccc94 Mon Sep 17 00:00:00 2001 From: Keshava Munegowda Date: Mon, 19 Mar 2012 12:12:47 +0530 Subject: ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue It is observed that the echi ports of 3430 sdp board are not working due to the random timing of programming the associated GPIOs of the ULPI PHYs of the EHCI for reset. If the PHYs are reset at during usbhs core driver, host ports will not work because EHCI driver is loaded after the resetting PHYs. The PHYs should be in reset state while initializing the EHCI controller. The code which does the GPIO pins associated with the PHYs are programmed to reset is moved from the USB host core driver to EHCI driver. Signed-off-by: Keshava Munegowda Reviewed-by: Partha Basak Acked-by: Felipe Balbi Tested-by: Igor Grinberg Signed-off-by: Samuel Ortiz --- drivers/mfd/omap-usb-host.c | 44 -------------------------------------------- 1 file changed, 44 deletions(-) (limited to 'drivers/mfd/omap-usb-host.c') diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 95a2e54..c8aae66 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #include @@ -502,19 +501,6 @@ static void omap_usbhs_init(struct device *dev) pm_runtime_get_sync(dev); spin_lock_irqsave(&omap->lock, flags); - if (pdata->ehci_data->phy_reset) { - if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) - gpio_request_one(pdata->ehci_data->reset_gpio_port[0], - GPIOF_OUT_INIT_LOW, "USB1 PHY reset"); - - if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) - gpio_request_one(pdata->ehci_data->reset_gpio_port[1], - GPIOF_OUT_INIT_LOW, "USB2 PHY reset"); - - /* Hold the PHY in RESET for enough time till DIR is high */ - udelay(10); - } - omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION); dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev); @@ -593,39 +579,10 @@ static void omap_usbhs_init(struct device *dev) usbhs_omap_tll_init(dev, OMAP_TLL_CHANNEL_COUNT); } - if (pdata->ehci_data->phy_reset) { - /* Hold the PHY in RESET for enough time till - * PHY is settled and ready - */ - udelay(10); - - if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) - gpio_set_value - (pdata->ehci_data->reset_gpio_port[0], 1); - - if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) - gpio_set_value - (pdata->ehci_data->reset_gpio_port[1], 1); - } - spin_unlock_irqrestore(&omap->lock, flags); pm_runtime_put_sync(dev); } -static void omap_usbhs_deinit(struct device *dev) -{ - struct usbhs_hcd_omap *omap = dev_get_drvdata(dev); - struct usbhs_omap_platform_data *pdata = &omap->platdata; - - if (pdata->ehci_data->phy_reset) { - if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) - gpio_free(pdata->ehci_data->reset_gpio_port[0]); - - if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) - gpio_free(pdata->ehci_data->reset_gpio_port[1]); - } -} - /** * usbhs_omap_probe - initialize TI-based HCDs @@ -860,7 +817,6 @@ static int __devexit usbhs_omap_remove(struct platform_device *pdev) { struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev); - omap_usbhs_deinit(&pdev->dev); iounmap(omap->tll_base); iounmap(omap->uhh_base); clk_put(omap->init_60m_fclk); -- cgit v1.1 From 13176a89e1c4a0011bd9f576730b0338ecb619ff Mon Sep 17 00:00:00 2001 From: Russ Dill Date: Sun, 22 Apr 2012 01:48:18 -0700 Subject: mfd: Fix build breakage in omap-usb-host.c 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' removes the include for linux/gpio.h from omap-usb-host.c. This include indirectly includes plat/cpu.h which is required by omap-usb-host.c. Fix the build breakage by including it directly. Acked-by: Keshava Munegowda Acked-by: Kevin Hilman Tested-by: Arend van Spriel Signed-off-by: Russ Dill Signed-off-by: Samuel Ortiz --- drivers/mfd/omap-usb-host.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/mfd/omap-usb-host.c') diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index c8aae66..7e96bb2 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include -- cgit v1.1