From aea686b47c0cf97e0c6941799b523b6df87fc234 Mon Sep 17 00:00:00 2001 From: Vipin Kumar Date: Wed, 14 Mar 2012 11:47:10 +0530 Subject: mtd: nand/fsmc: Read only 512 + 13 bytes for 8bit NAND devices The ECC logic of FSMC works on 512 bytes data + 13 bytes ECC to generate error indices of up to 8 incorrect bits. The FSMC driver reads 14 instead of 13 oob bytes to accommodate for 16 bit device as well. Unfortunately, the internal ecc state machine gets corrupted for 8 bit devices reading 512 + 14 bytes of data resulting in error indices not getting reported. Fix this by reading 14 bytes only for 16 bit devices Signed-off-by: Vipin Kumar Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/fsmc_nand.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/mtd/nand') diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c index 902ba0d..bd42339 100644 --- a/drivers/mtd/nand/fsmc_nand.c +++ b/drivers/mtd/nand/fsmc_nand.c @@ -549,7 +549,9 @@ static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, * to read at least 13 bytes even in case of 16 bit NAND * devices */ - len = roundup(len, 2); + if (chip->options & NAND_BUSWIDTH_16) + len = roundup(len, 2); + chip->cmdfunc(mtd, NAND_CMD_READOOB, off, page); chip->read_buf(mtd, oob + j, len); j += len; -- cgit v1.1