From 087e35ad71aac1daab0fcd21b61da15ffe7aaec5 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Thu, 19 Sep 2013 18:09:55 +0530 Subject: regulator: wm8350: correct the max_uV of LDO As per datasheet, voltage range for LDOs are as follows: 0000 = 0.9V ...(50mV steps) 01111 = 1.65V 10000 = 1.8V ... (100mV stepns) 11111 = 3.3V So, there is no selector for 1.65V to 1.8V. Correcting the range for max_uV for selector between 0 to 15. Signed-off-by: Laxman Dewangan Signed-off-by: Mark Brown --- drivers/regulator/wm8350-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/regulator') diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c index 835b5f0..61ca929 100644 --- a/drivers/regulator/wm8350-regulator.c +++ b/drivers/regulator/wm8350-regulator.c @@ -543,7 +543,7 @@ static int wm8350_dcdc_set_suspend_mode(struct regulator_dev *rdev, } static const struct regulator_linear_range wm8350_ldo_ranges[] = { - { .min_uV = 900000, .max_uV = 1750000, .min_sel = 0, .max_sel = 15, + { .min_uV = 900000, .max_uV = 1650000, .min_sel = 0, .max_sel = 15, .uV_step = 50000 }, { .min_uV = 1800000, .max_uV = 3300000, .min_sel = 16, .max_sel = 31, .uV_step = 100000 }, -- cgit v1.1