From b53cc0fadef59583a9056c973e639852bed47e73 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Tue, 31 Jul 2012 18:29:08 +0400 Subject: serial: Change Kconfig entry for CLPS711X-target This trivial patch adds a short description for SERIAL_CLPS711X Kconfig entry, removes excess dependence on the ARM-platform (this is done globally for the platform), allows the driver to be compiled by default and removes unnecessary description about GRUB and LILO, because these bootloaders do not supported this platform. Signed-off-by: Alexander Shiyan Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 070b442..4720b4b 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -160,10 +160,12 @@ config SERIAL_KS8695_CONSOLE config SERIAL_CLPS711X tristate "CLPS711X serial port support" - depends on ARM && ARCH_CLPS711X + depends on ARCH_CLPS711X select SERIAL_CORE + default y help - ::: To be written ::: + This enables the driver for the on-chip UARTs of the Cirrus + Logic EP711x/EP721x/EP731x processors. config SERIAL_CLPS711X_CONSOLE bool "Support for console on CLPS711X serial port" @@ -173,9 +175,7 @@ config SERIAL_CLPS711X_CONSOLE Even if you say Y here, the currently visible virtual console (/dev/tty0) will still be used as the system console by default, but you can alter that using a kernel command line option such as - "console=ttyCL1". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) + "console=ttyCL1". config SERIAL_SAMSUNG tristate "Samsung SoC serial support" -- cgit v1.1 From 7d9739cd6b03575bc88c6ce3c60853dbc50a6ae2 Mon Sep 17 00:00:00 2001 From: Fengguang Wu Date: Tue, 7 Aug 2012 13:12:47 +0800 Subject: serial: ifx6x60: fix paging fault on spi_register_driver [ 117.240866] BUG: unable to handle kernel paging request at 815b627c [ 117.240866] IP: [<813fe94b>] spi_register_driver+0xb/0x50 ... [ 117.240866] Call Trace: [ 117.240866] [<817de977>] ifx_spi_init+0xbe/0xf0 The root cause is, spi_register_driver() is trying to write into the passed *const* struct spi_driver. Signed-off-by: Fengguang Wu Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/ifx6x60.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index 144cd39..3ad079f 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -1331,7 +1331,7 @@ static const struct spi_device_id ifx_id_table[] = { MODULE_DEVICE_TABLE(spi, ifx_id_table); /* spi operations */ -static const struct spi_driver ifx_spi_driver = { +static struct spi_driver ifx_spi_driver = { .driver = { .name = DRVNAME, .pm = &ifx_spi_pm, -- cgit v1.1 From 00592021010ad86d3b26bac7034034f6af145a2c Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Wed, 8 Aug 2012 10:37:59 +0800 Subject: serial: mxs-auart: fix the wrong RTS hardware flow control Without checking if the auart supports the hardware flow control or not, the old mxs_auart_set_mctrl() asserted the RTS pin blindly. This will causes the auart receives wrong data in the following case: The far-end has already started the write operation, and wait for the auart asserts the RTS pin. Then the auart starts the read operation, but mxs_auart_set_mctrl() may be called before we set the RTSCTS in the mxs_auart_settermios(). So the RTS pin is asserted in a wrong situation, and we get the wrong data in the end. This bug has been catched when I connect the mx23(DTE) to the mx53(DCE). This patch also replaces the AUART_CTRL2_RTS with AUART_CTRL2_RTSEN. We should use the real the hardware flow control, not the software-controled hardware flow control. Signed-off-by: Huang Shijie Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/mxs-auart.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 2e341b8..3a667ee 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -73,6 +73,7 @@ #define AUART_CTRL0_CLKGATE (1 << 30) #define AUART_CTRL2_CTSEN (1 << 15) +#define AUART_CTRL2_RTSEN (1 << 14) #define AUART_CTRL2_RTS (1 << 11) #define AUART_CTRL2_RXE (1 << 9) #define AUART_CTRL2_TXE (1 << 8) @@ -259,9 +260,12 @@ static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl) u32 ctrl = readl(u->membase + AUART_CTRL2); - ctrl &= ~AUART_CTRL2_RTS; - if (mctrl & TIOCM_RTS) - ctrl |= AUART_CTRL2_RTS; + ctrl &= ~AUART_CTRL2_RTSEN; + if (mctrl & TIOCM_RTS) { + if (u->state->port.flags & ASYNC_CTS_FLOW) + ctrl |= AUART_CTRL2_RTSEN; + } + s->ctrl = mctrl; writel(ctrl, u->membase + AUART_CTRL2); } @@ -359,9 +363,9 @@ static void mxs_auart_settermios(struct uart_port *u, /* figure out the hardware flow control settings */ if (cflag & CRTSCTS) - ctrl2 |= AUART_CTRL2_CTSEN; + ctrl2 |= AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN; else - ctrl2 &= ~AUART_CTRL2_CTSEN; + ctrl2 &= ~(AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN); /* set baud rate */ baud = uart_get_baud_rate(u, termios, old, 0, u->uartclk); -- cgit v1.1 From 38f8eefccf3a23c4058a570fa2938a4f553cf8e0 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Sun, 12 Aug 2012 07:16:43 -0500 Subject: pmac_zilog,kdb: Fix console poll hook to return instead of loop kdb <-> kgdb transitioning does not work properly with this UART driver because the get character routine loops indefinitely as opposed to returning NO_POLL_CHAR per the expectation of the KDB I/O driver API. The symptom is a kernel hang when trying to switch debug modes. Cc: Alan Cox Signed-off-by: Jason Wessel Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pmac_zilog.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c index 654755a..333c8d0 100644 --- a/drivers/tty/serial/pmac_zilog.c +++ b/drivers/tty/serial/pmac_zilog.c @@ -1348,10 +1348,16 @@ static int pmz_verify_port(struct uart_port *port, struct serial_struct *ser) static int pmz_poll_get_char(struct uart_port *port) { struct uart_pmac_port *uap = (struct uart_pmac_port *)port; + int tries = 2; - while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) - udelay(5); - return read_zsdata(uap); + while (tries) { + if ((read_zsreg(uap, R0) & Rx_CH_AV) != 0) + return read_zsdata(uap); + if (tries--) + udelay(5); + } + + return NO_POLL_CHAR; } static void pmz_poll_put_char(struct uart_port *port, unsigned char c) -- cgit v1.1