/* * atmel_ssc_dai.c -- ALSA SoC ATMEL SSC Audio Layer Platform driver * * Copyright (C) 2005 SAN People * Copyright (C) 2008 Atmel * * Author: Sedji Gaouaou * ATMEL CORP. * * Based on at91-ssc.c by * Frank Mandarino * Based on pxa2xx Platform drivers by * Liam Girdwood * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "atmel-pcm.h" #include "atmel_ssc_dai.h" #define NUM_SSC_DEVICES 3 /* * SSC PDC registers required by the PCM DMA engine. */ static struct atmel_pdc_regs pdc_tx_reg = { .xpr = ATMEL_PDC_TPR, .xcr = ATMEL_PDC_TCR, .xnpr = ATMEL_PDC_TNPR, .xncr = ATMEL_PDC_TNCR, }; static struct atmel_pdc_regs pdc_rx_reg = { .xpr = ATMEL_PDC_RPR, .xcr = ATMEL_PDC_RCR, .xnpr = ATMEL_PDC_RNPR, .xncr = ATMEL_PDC_RNCR, }; /* * SSC & PDC status bits for transmit and receive. */ static struct atmel_ssc_mask ssc_tx_mask = { .ssc_enable = SSC_BIT(CR_TXEN), .ssc_disable = SSC_BIT(CR_TXDIS), .ssc_endx = SSC_BIT(SR_ENDTX), .ssc_endbuf = SSC_BIT(SR_TXBUFE), .pdc_enable = ATMEL_PDC_TXTEN, .pdc_disable = ATMEL_PDC_TXTDIS, }; static struct atmel_ssc_mask ssc_rx_mask = { .ssc_enable = SSC_BIT(CR_RXEN), .ssc_disable = SSC_BIT(CR_RXDIS), .ssc_endx = SSC_BIT(SR_ENDRX), .ssc_endbuf = SSC_BIT(SR_RXBUFF), .pdc_enable = ATMEL_PDC_RXTEN, .pdc_disable = ATMEL_PDC_RXTDIS, }; /* * DMA parameters. */ static struct atmel_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = { {{ .name = "SSC0 PCM out", .pdc = &pdc_tx_reg, .mask = &ssc_tx_mask, }, { .name = "SSC0 PCM in", .pdc = &pdc_rx_reg, .mask = &ssc_rx_mask, } }, {{ .name = "SSC1 PCM out", .pdc = &pdc_tx_reg, .mask = &ssc_tx_mask, }, { .name = "SSC1 PCM in", .pdc = &pdc_rx_reg, .mask = &ssc_rx_mask, } }, {{ .name = "SSC2 PCM out", .pdc = &pdc_tx_reg, .mask = &ssc_tx_mask, }, { .name = "SSC2 PCM in", .pdc = &pdc_rx_reg, .mask = &ssc_rx_mask, } }, }; static struct atmel_ssc_info ssc_info[NUM_SSC_DEVICES] = { { .name = "ssc0", .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock), .dir_mask = SSC_DIR_MASK_UNUSED, .initialized = 0, }, { .name = "ssc1", .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock), .dir_mask = SSC_DIR_MASK_UNUSED, .initialized = 0, }, { .name = "ssc2", .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock), .dir_mask = SSC_DIR_MASK_UNUSED, .initialized = 0, }, }; /* * SSC interrupt handler. Passes PDC interrupts to the DMA * interrupt handler in the PCM driver. */ static irqreturn_t atmel_ssc_interrupt(int irq, void *dev_id) { struct atmel_ssc_info *ssc_p = dev_id; struct atmel_pcm_dma_params *dma_params; u32 ssc_sr; u32 ssc_substream_mask; int i; ssc_sr = (unsigned long)ssc_readl(ssc_p->ssc->regs, SR) & (unsigned long)ssc_readl(ssc_p->ssc->regs, IMR); /* * Loop through the substreams attached to this SSC. If * a DMA-related interrupt occurred on that substream, call * the DMA interrupt handler function, if one has been * registered in the dma_params structure by the PCM driver. */ for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) { dma_params = ssc_p->dma_params[i]; if ((dma_params != NULL) && (dma_params->dma_intr_handler != NULL)) { ssc_substream_mask = (dma_params->mask->ssc_endx | dma_params->mask->ssc_endbuf); if (ssc_sr & ssc_substream_mask) { dma_params->dma_intr_handler(ssc_sr, dma_params-> substream); } } } return IRQ_HANDLED; } /*-------------------------------------------------------------------------*\ * DAI functions \*-------------------------------------------------------------------------*/ /* * Startup. Only that one substream allowed in each direction. */ static int atmel_ssc_startup(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { struct atmel_ssc_info *ssc_p = &ssc_info[dai->id]; int dir_mask; pr_debug("atmel_ssc_startup: SSC_SR=0x%u\n", ssc_readl(ssc_p->ssc->regs, SR)); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) dir_mask = SSC_DIR_MASK_PLAYBACK; else dir_mask = SSC_DIR_MASK_CAPTURE; spin_lock_irq(&ssc_p->lock); if (ssc_p->dir_mask & dir_mask) { spin_unlock_irq(&ssc_p->lock); return -EBUSY; } ssc_p->dir_mask |= dir_mask; spin_unlock_irq(&ssc_p->lock); return 0; } /* * Shutdown. Clear DMA parameters and shutdown the SSC if there * are no other substreams open. */ static void atmel_ssc_shutdown(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { struct atmel_ssc_info *ssc_p = &ssc_info[dai->id]; struct atmel_pcm_dma_params *dma_params; int dir, dir_mask; if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) dir = 0; else dir = 1; dma_params = ssc_p->dma_params[dir]; if (dma_params != NULL) { ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable); pr_debug("atmel_ssc_shutdown: %s disabled SSC_SR=0x%08x\n", (dir ? "receive" : "transmit"), ssc_readl(ssc_p->ssc->regs, SR)); dma_params->ssc = NULL; dma_params->substream = NULL; ssc_p->dma_params[dir] = NULL; } dir_mask = 1 << dir; spin_lock_irq(&ssc_p->lock); ssc_p->dir_mask &= ~dir_mask; if (!ssc_p->dir_mask) { if (ssc_p->initialized) { /* Shutdown the SSC clock. */ pr_debug("atmel_ssc_dau: Stopping clock\n"); clk_disable(ssc_p->ssc->clk); free_irq(ssc_p->ssc->irq, ssc_p); ssc_p->initialized = 0; } /* Reset the SSC */ ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); /* Clear the SSC dividers */ ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0; } spin_unlock_irq(&ssc_p->lock); } /* * Record the DAI format for use in hw_params(). */ static int atmel_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt) { struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; ssc_p->daifmt = fmt; return 0; } /* * Record SSC clock dividers for use in hw_params(). */ static int atmel_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, int div_id, int div) { struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; switch (div_id) { case ATMEL_SSC_CMR_DIV: /* * The same master clock divider is used for both * transmit and receive, so if a value has already * been set, it must match this value. */ if (ssc_p->cmr_div == 0) ssc_p->cmr_div = div; else if (div != ssc_p->cmr_div) return -EBUSY; break; case ATMEL_SSC_TCMR_PERIOD: ssc_p->tcmr_period = div; break; case ATMEL_SSC_RCMR_PERIOD: ssc_p->rcmr_period = div; break; default: return -EINVAL; } return 0; } /* * Configure the SSC. */ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) { struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); int id = dai->id; struct atmel_ssc_info *ssc_p = &ssc_info[id]; struct atmel_pcm_dma_params *dma_params; int dir, channels, bits; u32 tfmr, rfmr, tcmr, rcmr; int start_event; int ret; /* * Currently, there is only one set of dma params for * each direction. If more are added, this code will * have to be changed to select the proper set. */ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) dir = 0; else dir = 1; dma_params = &ssc_dma_params[id][dir]; dma_params->ssc = ssc_p->ssc; dma_params->substream = substream; ssc_p->dma_params[dir] = dma_params; /* * The snd_soc_pcm_stream->dma_data field is only used to communicate * the appropriate DMA parameters to the pcm driver hw_params() * function. It should not be used for other purposes * as it is common to all substreams. */ snd_soc_dai_set_dma_data(rtd->cpu_dai, substream, dma_params); channels = params_channels(params); /* * Determine sample size in bits and the PDC increment. */ switch (params_format(params)) { case SNDRV_PCM_FORMAT_S8: bits = 8; dma_params->pdc_xfer_size = 1; break; case SNDRV_PCM_FORMAT_S16_LE: bits = 16; dma_params->pdc_xfer_size = 2; break; case SNDRV_PCM_FORMAT_S24_LE: bits = 24; dma_params->pdc_xfer_size = 4; break; case SNDRV_PCM_FORMAT_S32_LE: bits = 32; dma_params->pdc_xfer_size = 4; break; default: printk(KERN_WARNING "atmel_ssc_dai: unsupported PCM format"); return -EINVAL; } /* * The SSC only supports up to 16-bit samples in I2S format, due * to the size of the Frame Mode Register FSLEN field. */ if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S && bits > 16) { printk(KERN_WARNING "atmel_ssc_dai: sample size %d " "is too large for I2S\n", bits); return -EINVAL; } /* * Compute SSC register settings. */ switch (ssc_p->daifmt & (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) { case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: /* * I2S format, SSC provides BCLK and LRC clocks. * * The SSC transmit and receive clocks are generated * from the MCK divider, and the BCLK signal * is output on the SSC TK line. */ rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) | SSC_BF(RCMR_STTDLY, START_DELAY) | SSC_BF(RCMR_START, SSC_START_FALLING_RF) | SSC_BF(RCMR_CKI, SSC_CKI_RISING) | SSC_BF(RCMR_CKO, SSC_CKO_NONE) | SSC_BF(RCMR_CKS, SSC_CKS_DIV); rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE) | SSC_BF(RFMR_FSLEN, (bits - 1)) | SSC_BF(RFMR_DATNB, (channels - 1)) | SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_LOOP, 0) | SSC_BF(RFMR_DATLEN, (bits - 1)); tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) | SSC_BF(TCMR_STTDLY, START_DELAY) | SSC_BF(TCMR_START, SSC_START_FALLING_RF) | SSC_BF(TCMR_CKI, SSC_CKI_FALLING) | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) | SSC_BF(TCMR_CKS, SSC_CKS_DIV); tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | SSC_BF(TFMR_FSDEN, 0) | SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE) | SSC_BF(TFMR_FSLEN, (bits - 1)) | SSC_BF(TFMR_DATNB, (channels - 1)) | SSC_BIT(TFMR_MSBF) | SSC_BF(TFMR_DATDEF, 0) | SSC_BF(TFMR_DATLEN, (bits - 1)); break; case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: /* * I2S format, CODEC supplies BCLK and LRC clocks. * * The SSC transmit clock is obtained from the BCLK signal on * on the TK line, and the SSC receive clock is * generated from the transmit clock. * * For single channel data, one sample is transferred * on the falling edge of the LRC clock. * For two channel data, one sample is * transferred on both edges of the LRC clock. */ start_event = ((channels == 1) ? SSC_START_FALLING_RF : SSC_START_EDGE_RF); rcmr = SSC_BF(RCMR_PERIOD, 0) | SSC_BF(RCMR_STTDLY, START_DELAY) | SSC_BF(RCMR_START, start_event) | SSC_BF(RCMR_CKI, SSC_CKI_RISING) | SSC_BF(RCMR_CKO, SSC_CKO_NONE) | SSC_BF(RCMR_CKS, SSC_CKS_CLOCK); rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | SSC_BF(RFMR_FSOS, SSC_FSOS_NONE) | SSC_BF(RFMR_FSLEN, 0) | SSC_BF(RFMR_DATNB, 0) | SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_LOOP, 0) | SSC_BF(RFMR_DATLEN, (bits - 1)); tcmr = SSC_BF(TCMR_PERIOD, 0) | SSC_BF(TCMR_STTDLY, START_DELAY) | SSC_BF(TCMR_START, start_event) | SSC_BF(TCMR_CKI, SSC_CKI_FALLING) | SSC_BF(TCMR_CKO, SSC_CKO_NONE) | SSC_BF(TCMR_CKS, SSC_CKS_PIN); tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | SSC_BF(TFMR_FSDEN, 0) | SSC_BF(TFMR_FSOS, SSC_FSOS_NONE) | SSC_BF(TFMR_FSLEN, 0) | SSC_BF(TFMR_DATNB, 0) | SSC_BIT(TFMR_MSBF) | SSC_BF(TFMR_DATDEF, 0) | SSC_BF(TFMR_DATLEN, (bits - 1)); break; case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: /* * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks. * * The SSC transmit and receive clocks are generated from the * MCK divider, and the BCLK signal is output * on the SSC TK line. */ rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) | SSC_BF(RCMR_STTDLY, 1) | SSC_BF(RCMR_START, SSC_START_RISING_RF) | SSC_BF(RCMR_CKI, SSC_CKI_RISING) | SSC_BF(RCMR_CKO, SSC_CKO_NONE) | SSC_BF(RCMR_CKS, SSC_CKS_DIV); rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE) | SSC_BF(RFMR_FSLEN, 0) | SSC_BF(RFMR_DATNB, (channels - 1)) | SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_LOOP, 0) | SSC_BF(RFMR_DATLEN, (bits - 1)); tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) | SSC_BF(TCMR_STTDLY, 1) | SSC_BF(TCMR_START, SSC_START_RISING_RF) | SSC_BF(TCMR_CKI, SSC_CKI_RISING) | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) | SSC_BF(TCMR_CKS, SSC_CKS_DIV); tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | SSC_BF(TFMR_FSDEN, 0) | SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE) | SSC_BF(TFMR_FSLEN, 0) | SSC_BF(TFMR_DATNB, (channels - 1)) | SSC_BIT(TFMR_MSBF) | SSC_BF(TFMR_DATDEF, 0) | SSC_BF(TFMR_DATLEN, (bits - 1)); break; case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: default: printk(KERN_WARNING "atmel_ssc_dai: unsupported DAI format 0x%x\n", ssc_p->daifmt); return -EINVAL; } pr_debug("atmel_ssc_hw_params: " "RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n", rcmr, rfmr, tcmr, tfmr); if (!ssc_p->initialized) { /* Enable PMC peripheral clock for this SSC */ pr_debug("atmel_ssc_dai: Starting clock\n"); clk_enable(ssc_p->ssc->clk); /* Reset the SSC and its PDC registers */ ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0); ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0); ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0); ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0); ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0); ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0); ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0); ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0); ret = request_irq(ssc_p->ssc->irq, atmel_ssc_interrupt, 0, ssc_p->name, ssc_p); if (ret < 0) { printk(KERN_WARNING "atmel_ssc_dai: request_irq failure\n"); pr_debug("Atmel_ssc_dai: Stoping clock\n"); clk_disable(ssc_p->ssc->clk); return ret; } ssc_p->initialized = 1; } /* set SSC clock mode register */ ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->cmr_div); /* set receive clock mode and format */ ssc_writel(ssc_p->ssc->regs, RCMR, rcmr); ssc_writel(ssc_p->ssc->regs, RFMR, rfmr); /* set transmit clock mode and format */ ssc_writel(ssc_p->ssc->regs, TCMR, tcmr); ssc_writel(ssc_p->ssc->regs, TFMR, tfmr); pr_debug("atmel_ssc_dai,hw_params: SSC initialized\n"); return 0; } static int atmel_ssc_prepare(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { struct atmel_ssc_info *ssc_p = &ssc_info[dai->id]; struct atmel_pcm_dma_params *dma_params; int dir; if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) dir = 0; else dir = 1; dma_params = ssc_p->dma_params[dir]; ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable); pr_debug("%s enabled SSC_SR=0x%08x\n", dir ? "receive" : "transmit", ssc_readl(ssc_p->ssc->regs, SR)); return 0; } #ifdef CONFIG_PM static int atmel_ssc_suspend(struct snd_soc_dai *cpu_dai) { struct atmel_ssc_info *ssc_p; if (!cpu_dai->active) return 0; ssc_p = &ssc_info[cpu_dai->id]; /* Save the status register before disabling transmit and receive */ ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR); ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS)); /* Save the current interrupt mask, then disable unmasked interrupts */ ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR); ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr); ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR); ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR); ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR); ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR); ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR); return 0; } static int atmel_ssc_resume(struct snd_soc_dai *cpu_dai) { struct atmel_ssc_info *ssc_p; u32 cr; if (!cpu_dai->active) return 0; ssc_p = &ssc_info[cpu_dai->id]; /* restore SSC register settings */ ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr); ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr); ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr); ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr); ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr); /* re-enable interrupts */ ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr); /* Re-enable receive and transmit as appropriate */ cr = 0; cr |= (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0; cr |= (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0; ssc_writel(ssc_p->ssc->regs, CR, cr); return 0; } #else /* CONFIG_PM */ # define atmel_ssc_suspend NULL # define atmel_ssc_resume NULL #endif /* CONFIG_PM */ static int atmel_ssc_probe(struct snd_soc_dai *dai) { struct atmel_ssc_info *ssc_p = &ssc_info[dai->id]; snd_soc_dai_set_drvdata(dai, ssc_p); return 0; } #define ATMEL_SSC_RATES (SNDRV_PCM_RATE_8000_96000) #define ATMEL_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) static const struct snd_soc_dai_ops atmel_ssc_dai_ops = { .startup = atmel_ssc_startup, .shutdown = atmel_ssc_shutdown, .prepare = atmel_ssc_prepare, .hw_params = atmel_ssc_hw_params, .set_fmt = atmel_ssc_set_dai_fmt, .set_clkdiv = atmel_ssc_set_dai_clkdiv, }; static struct snd_soc_dai_driver atmel_ssc_dai = { .probe = atmel_ssc_probe, .suspend = atmel_ssc_suspend, .resume = atmel_ssc_resume, .playback = { .channels_min = 1, .channels_max = 2, .rates = ATMEL_SSC_RATES, .formats = ATMEL_SSC_FORMATS,}, .capture = { .channels_min = 1, .channels_max = 2, .rates = ATMEL_SSC_RATES, .formats = ATMEL_SSC_FORMATS,}, .ops = &atmel_ssc_dai_ops, }; static int asoc_ssc_init(struct device *dev) { int ret; ret = snd_soc_register_dai(dev, &atmel_ssc_dai); if (ret) { dev_err(dev, "Could not register DAI: %d\n", ret); goto err; } ret = atmel_pcm_pdc_platform_register(dev); if (ret) { dev_err(dev, "Could not register PCM: %d\n", ret); goto err_unregister_dai; }; return 0; err_unregister_dai: snd_soc_unregister_dai(dev); err: return ret; } static void asoc_ssc_exit(struct device *dev) { atmel_pcm_pdc_platform_unregister(dev); snd_soc_unregister_dai(dev); } /** * atmel_ssc_set_audio - Allocate the specified SSC for audio use. */ int atmel_ssc_set_audio(int ssc_id) { struct ssc_device *ssc; int ret; /* If we can grab the SSC briefly to parent the DAI device off it */ ssc = ssc_request(ssc_id); if (IS_ERR(ssc)) { pr_err("Unable to parent ASoC SSC DAI on SSC: %ld\n", PTR_ERR(ssc)); return PTR_ERR(ssc); } else { ssc_info[ssc_id].ssc = ssc; } ret = asoc_ssc_init(&ssc->pdev->dev); return ret; } EXPORT_SYMBOL_GPL(atmel_ssc_set_audio); void atmel_ssc_put_audio(int ssc_id) { struct ssc_device *ssc = ssc_info[ssc_id].ssc; ssc_free(ssc); asoc_ssc_exit(&ssc->pdev->dev); } EXPORT_SYMBOL_GPL(atmel_ssc_put_audio); /* Module information */ MODULE_AUTHOR("Sedji Gaouaou, sedji.gaouaou@atmel.com, www.atmel.com"); MODULE_DESCRIPTION("ATMEL SSC ASoC Interface"); MODULE_LICENSE("GPL");