diff options
-rw-r--r-- | arch/powerpc/boot/dts/mgcoge.dts | 47 | ||||
-rw-r--r-- | arch/powerpc/configs/mgcoge_defconfig | 9 | ||||
-rw-r--r-- | arch/powerpc/platforms/82xx/Makefile | 2 | ||||
-rw-r--r-- | arch/powerpc/platforms/82xx/km82xx.c (renamed from arch/powerpc/platforms/82xx/mgcoge.c) | 62 |
4 files changed, 72 insertions, 48 deletions
diff --git a/arch/powerpc/boot/dts/mgcoge.dts b/arch/powerpc/boot/dts/mgcoge.dts index 0ce9664..1360d2f 100644 --- a/arch/powerpc/boot/dts/mgcoge.dts +++ b/arch/powerpc/boot/dts/mgcoge.dts @@ -13,7 +13,7 @@ /dts-v1/; / { model = "MGCOGE"; - compatible = "keymile,mgcoge"; + compatible = "keymile,km82xx"; #address-cells = <1>; #size-cells = <1>; @@ -48,8 +48,10 @@ reg = <0xf0010100 0x40>; ranges = <0 0 0xfe000000 0x00400000 - 5 0 0x50000000 0x20000000 - >; /* Filled in by U-Boot */ + 1 0 0x30000000 0x00010000 + 2 0 0x40000000 0x00010000 + 5 0 0x50000000 0x04000000 + >; flash@0,0 { compatible = "cfi-flash"; @@ -60,36 +62,32 @@ device-width = <1>; partition@0 { label = "u-boot"; - reg = <0 0x40000>; + reg = <0x00000 0xC0000>; }; - partition@40000 { + partition@1 { label = "env"; - reg = <0x40000 0x20000>; + reg = <0xC0000 0x20000>; }; - partition@60000 { - label = "kernel"; - reg = <0x60000 0x220000>; + partition@2 { + label = "envred"; + reg = <0xE0000 0x20000>; }; - partition@280000 { - label = "dtb"; - reg = <0x280000 0x20000>; + partition@3 { + label = "free"; + reg = <0x100000 0x300000>; }; }; flash@5,0 { compatible = "cfi-flash"; - reg = <5 0x0 0x2000000>; + reg = <5 0x00000000 0x02000000 + 5 0x02000000 0x02000000>; #address-cells = <1>; #size-cells = <1>; bank-width = <2>; - device-width = <2>; - partition@0 { - label = "ramdisk"; - reg = <0 0x7a0000>; - }; - partition@7a0000 { - label = "user"; - reg = <0x7a0000 0x1860000>; + partition@app { /* 64 MBytes */ + label = "ubi0"; + reg = <0x00000000 0x04000000>; }; }; }; @@ -217,6 +215,13 @@ }; }; + cpm2_pio_c: gpio-controller@10d40 { + #gpio-cells = <2>; + compatible = "fsl,cpm2-pario-bank"; + reg = <0x10d40 0x14>; + gpio-controller; + }; + PIC: interrupt-controller@10c00 { #interrupt-cells = <2>; interrupt-controller; diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig index 39518e9..6cb588a 100644 --- a/arch/powerpc/configs/mgcoge_defconfig +++ b/arch/powerpc/configs/mgcoge_defconfig @@ -1,4 +1,5 @@ CONFIG_SYSVIPC=y +CONFIG_SPARSE_IRQ=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -10,7 +11,6 @@ CONFIG_SLAB=y CONFIG_PPC_82xx=y CONFIG_MGCOGE=y CONFIG_BINFMT_MISC=y -CONFIG_SPARSE_IRQ=y # CONFIG_SECCOMP is not set CONFIG_NET=y CONFIG_PACKET=y @@ -30,7 +30,6 @@ CONFIG_MTD=y CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_OF_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLKDEVS=y CONFIG_MTD_CFI=y @@ -43,7 +42,6 @@ CONFIG_MTD_PHYSMAP_OF=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y CONFIG_FIXED_PHY=y @@ -67,7 +65,6 @@ CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y CONFIG_AUTOFS4_FS=y CONFIG_PROC_KCORE=y CONFIG_TMPFS=y @@ -88,13 +85,9 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_BDI_SWITCH=y -CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_PCBC=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set diff --git a/arch/powerpc/platforms/82xx/Makefile b/arch/powerpc/platforms/82xx/Makefile index d982793..455fe21 100644 --- a/arch/powerpc/platforms/82xx/Makefile +++ b/arch/powerpc/platforms/82xx/Makefile @@ -6,4 +6,4 @@ obj-$(CONFIG_CPM2) += pq2.o obj-$(CONFIG_PQ2_ADS_PCI_PIC) += pq2ads-pci-pic.o obj-$(CONFIG_PQ2FADS) += pq2fads.o obj-$(CONFIG_EP8248E) += ep8248e.o -obj-$(CONFIG_MGCOGE) += mgcoge.o +obj-$(CONFIG_MGCOGE) += km82xx.o diff --git a/arch/powerpc/platforms/82xx/mgcoge.c b/arch/powerpc/platforms/82xx/km82xx.c index 7a5de9e..428c5e0 100644 --- a/arch/powerpc/platforms/82xx/mgcoge.c +++ b/arch/powerpc/platforms/82xx/km82xx.c @@ -1,6 +1,6 @@ /* - * Keymile mgcoge support - * Copyright 2008 DENX Software Engineering GmbH + * Keymile km82xx support + * Copyright 2008-2011 DENX Software Engineering GmbH * Author: Heiko Schocher <hs@denx.de> * * based on code from: @@ -31,9 +31,10 @@ #include "pq2.h" -static void __init mgcoge_pic_init(void) +static void __init km82xx_pic_init(void) { - struct device_node *np = of_find_compatible_node(NULL, NULL, "fsl,pq2-pic"); + struct device_node *np = of_find_compatible_node(NULL, NULL, + "fsl,pq2-pic"); if (!np) { printk(KERN_ERR "PIC init: can not find cpm-pic node\n"); return; @@ -47,12 +48,18 @@ struct cpm_pin { int port, pin, flags; }; -static __initdata struct cpm_pin mgcoge_pins[] = { +static __initdata struct cpm_pin km82xx_pins[] = { /* SMC2 */ {0, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, {0, 9, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + /* SCC1 */ + {2, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {2, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + /* SCC4 */ {2, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, {2, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, @@ -107,30 +114,49 @@ static __initdata struct cpm_pin mgcoge_pins[] = { {3, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN}, {3, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN}, #endif + + /* USB */ + {0, 10, CPM_PIN_OUTPUT | CPM_PIN_GPIO}, /* FULL_SPEED */ + {0, 11, CPM_PIN_OUTPUT | CPM_PIN_GPIO}, /*/SLAVE */ + {2, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* RXN */ + {2, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* RXP */ + {2, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, /* /OE */ + {2, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* RXCLK */ + {3, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, /* TXP */ + {3, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, /* TXN */ + {3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* RXD */ }; static void __init init_ioports(void) { int i; - for (i = 0; i < ARRAY_SIZE(mgcoge_pins); i++) { - const struct cpm_pin *pin = &mgcoge_pins[i]; + for (i = 0; i < ARRAY_SIZE(km82xx_pins); i++) { + const struct cpm_pin *pin = &km82xx_pins[i]; cpm2_set_pin(pin->port, pin->pin, pin->flags); } cpm2_smc_clk_setup(CPM_CLK_SMC2, CPM_BRG8); + cpm2_clk_setup(CPM_CLK_SCC1, CPM_CLK11, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_SCC1, CPM_CLK11, CPM_CLK_TX); + cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK5, CPM_CLK_RTX); cpm2_clk_setup(CPM_CLK_SCC4, CPM_CLK7, CPM_CLK_RX); cpm2_clk_setup(CPM_CLK_SCC4, CPM_CLK8, CPM_CLK_TX); cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_RX); cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK9, CPM_CLK_TX); cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX); cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX); + + /* Force USB FULL SPEED bit to '1' */ + setbits32(&cpm2_immr->im_ioport.iop_pdata, 1 << (31 - 10)); + /* clear USB_SLAVE */ + clrbits32(&cpm2_immr->im_ioport.iop_pdata, 1 << (31 - 11)); } -static void __init mgcoge_setup_arch(void) +static void __init km82xx_setup_arch(void) { if (ppc_md.progress) - ppc_md.progress("mgcoge_setup_arch()", 0); + ppc_md.progress("km82xx_setup_arch()", 0); cpm2_reset(); @@ -142,7 +168,7 @@ static void __init mgcoge_setup_arch(void) init_ioports(); if (ppc_md.progress) - ppc_md.progress("mgcoge_setup_arch(), finish", 0); + ppc_md.progress("km82xx_setup_arch(), finish", 0); } static __initdata struct of_device_id of_bus_ids[] = { @@ -156,23 +182,23 @@ static int __init declare_of_platform_devices(void) return 0; } -machine_device_initcall(mgcoge, declare_of_platform_devices); +machine_device_initcall(km82xx, declare_of_platform_devices); /* * Called very early, device-tree isn't unflattened */ -static int __init mgcoge_probe(void) +static int __init km82xx_probe(void) { unsigned long root = of_get_flat_dt_root(); - return of_flat_dt_is_compatible(root, "keymile,mgcoge"); + return of_flat_dt_is_compatible(root, "keymile,km82xx"); } -define_machine(mgcoge) +define_machine(km82xx) { - .name = "Keymile MGCOGE", - .probe = mgcoge_probe, - .setup_arch = mgcoge_setup_arch, - .init_IRQ = mgcoge_pic_init, + .name = "Keymile km82xx", + .probe = km82xx_probe, + .setup_arch = km82xx_setup_arch, + .init_IRQ = km82xx_pic_init, .get_irq = cpm2_get_irq, .calibrate_decr = generic_calibrate_decr, .restart = pq2_restart, |