diff options
Diffstat (limited to 'Documentation/fb')
| -rw-r--r-- | Documentation/fb/fbcon.txt | 180 | ||||
| -rw-r--r-- | Documentation/fb/imacfb.txt | 31 |
2 files changed, 207 insertions, 4 deletions
diff --git a/Documentation/fb/fbcon.txt b/Documentation/fb/fbcon.txt index 08dce0f..f373df1 100644 --- a/Documentation/fb/fbcon.txt +++ b/Documentation/fb/fbcon.txt @@ -135,10 +135,10 @@ C. Boot options The angle can be changed anytime afterwards by 'echoing' the same numbers to any one of the 2 attributes found in - /sys/class/graphics/fb{x} + /sys/class/graphics/fbcon - con_rotate - rotate the display of the active console - con_rotate_all - rotate the display of all consoles + rotate - rotate the display of the active console + rotate_all - rotate the display of all consoles Console rotation will only become available if Console Rotation Support is compiled in your kernel. @@ -148,5 +148,177 @@ C. Boot options Actually, the underlying fb driver is totally ignorant of console rotation. ---- +C. Attaching, Detaching and Unloading + +Before going on on how to attach, detach and unload the framebuffer console, an +illustration of the dependencies may help. + +The console layer, as with most subsystems, needs a driver that interfaces with +the hardware. Thus, in a VGA console: + +console ---> VGA driver ---> hardware. + +Assuming the VGA driver can be unloaded, one must first unbind the VGA driver +from the console layer before unloading the driver. The VGA driver cannot be +unloaded if it is still bound to the console layer. (See +Documentation/console/console.txt for more information). + +This is more complicated in the case of the the framebuffer console (fbcon), +because fbcon is an intermediate layer between the console and the drivers: + +console ---> fbcon ---> fbdev drivers ---> hardware + +The fbdev drivers cannot be unloaded if it's bound to fbcon, and fbcon cannot +be unloaded if it's bound to the console layer. + +So to unload the fbdev drivers, one must first unbind fbcon from the console, +then unbind the fbdev drivers from fbcon. Fortunately, unbinding fbcon from +the console layer will automatically unbind framebuffer drivers from +fbcon. Thus, there is no need to explicitly unbind the fbdev drivers from +fbcon. + +So, how do we unbind fbcon from the console? Part of the answer is in +Documentation/console/console.txt. To summarize: + +Echo a value to the bind file that represents the framebuffer console +driver. So assuming vtcon1 represents fbcon, then: + +echo 1 > sys/class/vtconsole/vtcon1/bind - attach framebuffer console to + console layer +echo 0 > sys/class/vtconsole/vtcon1/bind - detach framebuffer console from + console layer + +If fbcon is detached from the console layer, your boot console driver (which is +usually VGA text mode) will take over. A few drivers (rivafb and i810fb) will +restore VGA text mode for you. With the rest, before detaching fbcon, you +must take a few additional steps to make sure that your VGA text mode is +restored properly. The following is one of the several methods that you can do: + +1. Download or install vbetool. This utility is included with most + distributions nowadays, and is usually part of the suspend/resume tool. + +2. In your kernel configuration, ensure that CONFIG_FRAMEBUFFER_CONSOLE is set + to 'y' or 'm'. Enable one or more of your favorite framebuffer drivers. + +3. Boot into text mode and as root run: + + vbetool vbestate save > <vga state file> + + The above command saves the register contents of your graphics + hardware to <vga state file>. You need to do this step only once as + the state file can be reused. + +4. If fbcon is compiled as a module, load fbcon by doing: + + modprobe fbcon + +5. Now to detach fbcon: + + vbetool vbestate restore < <vga state file> && \ + echo 0 > /sys/class/vtconsole/vtcon1/bind + +6. That's it, you're back to VGA mode. And if you compiled fbcon as a module, + you can unload it by 'rmmod fbcon' + +7. To reattach fbcon: + + echo 1 > /sys/class/vtconsole/vtcon1/bind + +8. Once fbcon is unbound, all drivers registered to the system will also +become unbound. This means that fbcon and individual framebuffer drivers +can be unloaded or reloaded at will. Reloading the drivers or fbcon will +automatically bind the console, fbcon and the drivers together. Unloading +all the drivers without unloading fbcon will make it impossible for the +console to bind fbcon. + +Notes for vesafb users: +======================= + +Unfortunately, if your bootline includes a vga=xxx parameter that sets the +hardware in graphics mode, such as when loading vesafb, vgacon will not load. +Instead, vgacon will replace the default boot console with dummycon, and you +won't get any display after detaching fbcon. Your machine is still alive, so +you can reattach vesafb. However, to reattach vesafb, you need to do one of +the following: + +Variation 1: + + a. Before detaching fbcon, do + + vbetool vbemode save > <vesa state file> # do once for each vesafb mode, + # the file can be reused + + b. Detach fbcon as in step 5. + + c. Attach fbcon + + vbetool vbestate restore < <vesa state file> && \ + echo 1 > /sys/class/vtconsole/vtcon1/bind + +Variation 2: + + a. Before detaching fbcon, do: + echo <ID> > /sys/class/tty/console/bind + + + vbetool vbemode get + + b. Take note of the mode number + + b. Detach fbcon as in step 5. + + c. Attach fbcon: + + vbetool vbemode set <mode number> && \ + echo 1 > /sys/class/vtconsole/vtcon1/bind + +Samples: +======== + +Here are 2 sample bash scripts that you can use to bind or unbind the +framebuffer console driver if you are in an X86 box: + +--------------------------------------------------------------------------- +#!/bin/bash +# Unbind fbcon + +# Change this to where your actual vgastate file is located +# Or Use VGASTATE=$1 to indicate the state file at runtime +VGASTATE=/tmp/vgastate + +# path to vbetool +VBETOOL=/usr/local/bin + + +for (( i = 0; i < 16; i++)) +do + if test -x /sys/class/vtconsole/vtcon$i; then + if [ `cat /sys/class/vtconsole/vtcon$i/name | grep -c "frame buffer"` \ + = 1 ]; then + if test -x $VBETOOL/vbetool; then + echo Unbinding vtcon$i + $VBETOOL/vbetool vbestate restore < $VGASTATE + echo 0 > /sys/class/vtconsole/vtcon$i/bind + fi + fi + fi +done + +--------------------------------------------------------------------------- +#!/bin/bash +# Bind fbcon + +for (( i = 0; i < 16; i++)) +do + if test -x /sys/class/vtconsole/vtcon$i; then + if [ `cat /sys/class/vtconsole/vtcon$i/name | grep -c "frame buffer"` \ + = 1 ]; then + echo Unbinding vtcon$i + echo 1 > /sys/class/vtconsole/vtcon$i/bind + fi + fi +done +--------------------------------------------------------------------------- + +-- Antonino Daplas <adaplas@pol.net> diff --git a/Documentation/fb/imacfb.txt b/Documentation/fb/imacfb.txt new file mode 100644 index 0000000..7590285 --- /dev/null +++ b/Documentation/fb/imacfb.txt @@ -0,0 +1,31 @@ + +What is imacfb? +=============== + +This is a generic EFI platform driver for Intel based Apple computers. +Imacfb is only for EFI booted Intel Macs. + +Supported Hardware +================== + +iMac 17"/20" +Macbook +Macbook Pro 15"/17" +MacMini + +How to use it? +============== + +Imacfb does not have any kind of autodetection of your machine. +You have to add the fillowing kernel parameters in your elilo.conf: + Macbook : + video=imacfb:macbook + MacMini : + video=imacfb:mini + Macbook Pro 15", iMac 17" : + video=imacfb:i17 + Macbook Pro 17", iMac 20" : + video=imacfb:i20 + +-- +Edgar Hucek <gimli@dark-green.com> |