diff options
Diffstat (limited to 'arch/arm/mach-mxs/timer.c')
| -rw-r--r-- | arch/arm/mach-mxs/timer.c | 296 |
1 files changed, 296 insertions, 0 deletions
diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c new file mode 100644 index 0000000..13647f3 --- /dev/null +++ b/arch/arm/mach-mxs/timer.c @@ -0,0 +1,296 @@ +/* + * Copyright (C) 2000-2001 Deep Blue Solutions + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com) + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/clockchips.h> +#include <linux/clk.h> + +#include <asm/mach/time.h> +#include <mach/mxs.h> +#include <mach/common.h> + +/* + * There are 2 versions of the timrot on Freescale MXS-based SoCs. + * The v1 on MX23 only gets 16 bits counter, while v2 on MX28 + * extends the counter to 32 bits. + * + * The implementation uses two timers, one for clock_event and + * another for clocksource. MX28 uses timrot 0 and 1, while MX23 + * uses 0 and 2. + */ + +#define MX23_TIMROT_VERSION_OFFSET 0x0a0 +#define MX28_TIMROT_VERSION_OFFSET 0x120 +#define BP_TIMROT_MAJOR_VERSION 24 +#define BV_TIMROT_VERSION_1 0x01 +#define BV_TIMROT_VERSION_2 0x02 +#define timrot_is_v1() (timrot_major_version == BV_TIMROT_VERSION_1) + +/* + * There are 4 registers for each timrotv2 instance, and 2 registers + * for each timrotv1. So address step 0x40 in macros below strides + * one instance of timrotv2 while two instances of timrotv1. + * + * As the result, HW_TIMROT_XXXn(1) defines the address of timrot1 + * on MX28 while timrot2 on MX23. + */ +/* common between v1 and v2 */ +#define HW_TIMROT_ROTCTRL 0x00 +#define HW_TIMROT_TIMCTRLn(n) (0x20 + (n) * 0x40) +/* v1 only */ +#define HW_TIMROT_TIMCOUNTn(n) (0x30 + (n) * 0x40) +/* v2 only */ +#define HW_TIMROT_RUNNING_COUNTn(n) (0x30 + (n) * 0x40) +#define HW_TIMROT_FIXED_COUNTn(n) (0x40 + (n) * 0x40) + +#define BM_TIMROT_TIMCTRLn_RELOAD (1 << 6) +#define BM_TIMROT_TIMCTRLn_UPDATE (1 << 7) +#define BM_TIMROT_TIMCTRLn_IRQ_EN (1 << 14) +#define BM_TIMROT_TIMCTRLn_IRQ (1 << 15) +#define BP_TIMROT_TIMCTRLn_SELECT 0 +#define BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL 0x8 +#define BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL 0xb + +static struct clock_event_device mxs_clockevent_device; +static enum clock_event_mode mxs_clockevent_mode = CLOCK_EVT_MODE_UNUSED; + +static void __iomem *mxs_timrot_base = MXS_IO_ADDRESS(MXS_TIMROT_BASE_ADDR); +static u32 timrot_major_version; + +static inline void timrot_irq_disable(void) +{ + __mxs_clrl(BM_TIMROT_TIMCTRLn_IRQ_EN, + mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); +} + +static inline void timrot_irq_enable(void) +{ + __mxs_setl(BM_TIMROT_TIMCTRLn_IRQ_EN, + mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); +} + +static void timrot_irq_acknowledge(void) +{ + __mxs_clrl(BM_TIMROT_TIMCTRLn_IRQ, + mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); +} + +static cycle_t timrotv1_get_cycles(struct clocksource *cs) +{ + return ~((__raw_readl(mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1)) + & 0xffff0000) >> 16); +} + +static cycle_t timrotv2_get_cycles(struct clocksource *cs) +{ + return ~__raw_readl(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1)); +} + +static int timrotv1_set_next_event(unsigned long evt, + struct clock_event_device *dev) +{ + /* timrot decrements the count */ + __raw_writel(evt, mxs_timrot_base + HW_TIMROT_TIMCOUNTn(0)); + + return 0; +} + +static int timrotv2_set_next_event(unsigned long evt, + struct clock_event_device *dev) +{ + /* timrot decrements the count */ + __raw_writel(evt, mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(0)); + + return 0; +} + +static irqreturn_t mxs_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + + timrot_irq_acknowledge(); + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction mxs_timer_irq = { + .name = "MXS Timer Tick", + .dev_id = &mxs_clockevent_device, + .flags = IRQF_TIMER | IRQF_IRQPOLL, + .handler = mxs_timer_interrupt, +}; + +#ifdef DEBUG +static const char *clock_event_mode_label[] const = { + [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC", + [CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT", + [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN", + [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED" +}; +#endif /* DEBUG */ + +static void mxs_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + /* Disable interrupt in timer module */ + timrot_irq_disable(); + + if (mode != mxs_clockevent_mode) { + /* Set event time into the furthest future */ + if (timrot_is_v1()) + __raw_writel(0xffff, + mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1)); + else + __raw_writel(0xffffffff, + mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1)); + + /* Clear pending interrupt */ + timrot_irq_acknowledge(); + } + +#ifdef DEBUG + pr_info("%s: changing mode from %s to %s\n", __func__, + clock_event_mode_label[mxs_clockevent_mode], + clock_event_mode_label[mode]); +#endif /* DEBUG */ + + /* Remember timer mode */ + mxs_clockevent_mode = mode; + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + pr_err("%s: Periodic mode is not implemented\n", __func__); + break; + case CLOCK_EVT_MODE_ONESHOT: + timrot_irq_enable(); + break; + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_RESUME: + /* Left event sources disabled, no more interrupts appear */ + break; + } +} + +static struct clock_event_device mxs_clockevent_device = { + .name = "mxs_timrot", + .features = CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .set_mode = mxs_set_mode, + .set_next_event = timrotv2_set_next_event, + .rating = 200, +}; + +static int __init mxs_clockevent_init(struct clk *timer_clk) +{ + unsigned int c = clk_get_rate(timer_clk); + + mxs_clockevent_device.mult = + div_sc(c, NSEC_PER_SEC, mxs_clockevent_device.shift); + mxs_clockevent_device.cpumask = cpumask_of(0); + if (timrot_is_v1()) { + mxs_clockevent_device.set_next_event = timrotv1_set_next_event; + mxs_clockevent_device.max_delta_ns = + clockevent_delta2ns(0xfffe, &mxs_clockevent_device); + mxs_clockevent_device.min_delta_ns = + clockevent_delta2ns(0xf, &mxs_clockevent_device); + } else { + mxs_clockevent_device.max_delta_ns = + clockevent_delta2ns(0xfffffffe, &mxs_clockevent_device); + mxs_clockevent_device.min_delta_ns = + clockevent_delta2ns(0xf, &mxs_clockevent_device); + } + + clockevents_register_device(&mxs_clockevent_device); + + return 0; +} + +static struct clocksource clocksource_mxs = { + .name = "mxs_timer", + .rating = 200, + .read = timrotv2_get_cycles, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static int __init mxs_clocksource_init(struct clk *timer_clk) +{ + unsigned int c = clk_get_rate(timer_clk); + + if (timrot_is_v1()) { + clocksource_mxs.read = timrotv1_get_cycles; + clocksource_mxs.mask = CLOCKSOURCE_MASK(16); + } + + clocksource_register_hz(&clocksource_mxs, c); + + return 0; +} + +void __init mxs_timer_init(struct clk *timer_clk, int irq) +{ + clk_enable(timer_clk); + + /* + * Initialize timers to a known state + */ + mxs_reset_block(mxs_timrot_base + HW_TIMROT_ROTCTRL); + + /* get timrot version */ + timrot_major_version = __raw_readl(mxs_timrot_base + + (cpu_is_mx23() ? MX23_TIMROT_VERSION_OFFSET : + MX28_TIMROT_VERSION_OFFSET)); + timrot_major_version >>= BP_TIMROT_MAJOR_VERSION; + + /* one for clock_event */ + __raw_writel((timrot_is_v1() ? + BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL : + BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL) | + BM_TIMROT_TIMCTRLn_UPDATE | + BM_TIMROT_TIMCTRLn_IRQ_EN, + mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); + + /* another for clocksource */ + __raw_writel((timrot_is_v1() ? + BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL : + BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL) | + BM_TIMROT_TIMCTRLn_RELOAD, + mxs_timrot_base + HW_TIMROT_TIMCTRLn(1)); + + /* set clocksource timer fixed count to the maximum */ + if (timrot_is_v1()) + __raw_writel(0xffff, + mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1)); + else + __raw_writel(0xffffffff, + mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1)); + + /* init and register the timer to the framework */ + mxs_clocksource_init(timer_clk); + mxs_clockevent_init(timer_clk); + + /* Make irqs happen */ + setup_irq(irq, &mxs_timer_irq); +} |