diff options
Diffstat (limited to 'arch/arm/mach-s5pv210')
| -rw-r--r-- | arch/arm/mach-s5pv210/Kconfig | 37 | ||||
| -rw-r--r-- | arch/arm/mach-s5pv210/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/mach-s5pv210/cpu.c | 15 | ||||
| -rw-r--r-- | arch/arm/mach-s5pv210/gpiolib.c | 14 | ||||
| -rw-r--r-- | arch/arm/mach-s5pv210/include/mach/irqs.h | 8 | ||||
| -rw-r--r-- | arch/arm/mach-s5pv210/include/mach/map.h | 9 | ||||
| -rw-r--r-- | arch/arm/mach-s5pv210/include/mach/pm-core.h | 43 | ||||
| -rw-r--r-- | arch/arm/mach-s5pv210/include/mach/regs-clock.h | 7 | ||||
| -rw-r--r-- | arch/arm/mach-s5pv210/include/mach/regs-gpio.h | 7 | ||||
| -rw-r--r-- | arch/arm/mach-s5pv210/include/mach/regs-sys.h | 19 | ||||
| -rw-r--r-- | arch/arm/mach-s5pv210/mach-goni.c | 226 | ||||
| -rw-r--r-- | arch/arm/mach-s5pv210/mach-smdkc110.c | 3 | ||||
| -rw-r--r-- | arch/arm/mach-s5pv210/mach-smdkv210.c | 3 | ||||
| -rw-r--r-- | arch/arm/mach-s5pv210/mach-torbreck.c | 131 | ||||
| -rw-r--r-- | arch/arm/mach-s5pv210/pm.c | 166 | ||||
| -rw-r--r-- | arch/arm/mach-s5pv210/sleep.S | 170 |
16 files changed, 837 insertions, 23 deletions
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 5315fec..862f239 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -11,9 +11,9 @@ if ARCH_S5PV210 config CPU_S5PV210 bool - select PLAT_S5P select S3C_PL330_DMA select S5P_EXT_INT + select S5PV210_PM if PM help Enable S5PV210 CPU support @@ -58,7 +58,6 @@ menu "S5PC110 Machines" config MACH_AQUILA bool "Aquila" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE select S3C_DEV_FB select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 @@ -75,7 +74,7 @@ config MACH_AQUILA config MACH_GONI bool "GONI" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE + select S5P_GPIO_INT select S3C_DEV_FB select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 @@ -83,8 +82,15 @@ config MACH_GONI select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 + select S3C_DEV_I2C1 + select S3C_DEV_I2C2 + select S3C_DEV_USB_HSOTG select S5P_DEV_ONENAND + select SAMSUNG_DEV_KEYPAD select S5PV210_SETUP_FB_24BPP + select S5PV210_SETUP_I2C1 + select S5PV210_SETUP_I2C2 + select S5PV210_SETUP_KEYPAD select S5PV210_SETUP_SDHCI help Machine support for Samsung GONI board @@ -93,7 +99,6 @@ config MACH_GONI config MACH_SMDKC110 bool "SMDKC110" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE select S3C_DEV_I2C1 select S3C_DEV_I2C2 select S3C_DEV_RTC @@ -113,7 +118,6 @@ menu "S5PV210 Machines" config MACH_SMDKV210 bool "SMDKV210" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 @@ -134,6 +138,29 @@ config MACH_SMDKV210 help Machine support for Samsung SMDKV210 +config MACH_TORBRECK + bool "Torbreck" + select CPU_S5PV210 + select ARCH_SPARSEMEM_ENABLE + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 + select S3C_DEV_HSMMC3 + select S3C_DEV_I2C1 + select S3C_DEV_I2C2 + select S3C_DEV_RTC + select S3C_DEV_WDT + select S5PV210_SETUP_I2C1 + select S5PV210_SETUP_I2C2 + select S5PV210_SETUP_SDHCI + help + Machine support for aESOP Torbreck + endmenu +config S5PV210_PM + bool + help + Power Management code common to S5PV210 + endif diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index 7045489..157754f 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -14,6 +14,7 @@ obj- := obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o dma.o gpiolib.o obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o +obj-$(CONFIG_S5PV210_PM) += pm.o sleep.o # machine support @@ -21,6 +22,7 @@ obj-$(CONFIG_MACH_AQUILA) += mach-aquila.o obj-$(CONFIG_MACH_SMDKV210) += mach-smdkv210.o obj-$(CONFIG_MACH_SMDKC110) += mach-smdkc110.o obj-$(CONFIG_MACH_GONI) += mach-goni.o +obj-$(CONFIG_MACH_TORBRECK) += mach-torbreck.o # device support diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c index 2f16bfc..8eb480e 100644 --- a/arch/arm/mach-s5pv210/cpu.c +++ b/arch/arm/mach-s5pv210/cpu.c @@ -85,6 +85,21 @@ static struct map_desc s5pv210_iodesc[] __initdata = { .pfn = __phys_to_pfn(S5PV210_PA_SROMC), .length = SZ_4K, .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_DMC0, + .pfn = __phys_to_pfn(S5PV210_PA_DMC0), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_DMC1, + .pfn = __phys_to_pfn(S5PV210_PA_DMC1), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_USB_HSPHY, + .pfn =__phys_to_pfn(S5PV210_PA_HSPHY), + .length = SZ_4K, + .type = MT_DEVICE, } }; diff --git a/arch/arm/mach-s5pv210/gpiolib.c b/arch/arm/mach-s5pv210/gpiolib.c index 0d45911..ab673ef 100644 --- a/arch/arm/mach-s5pv210/gpiolib.c +++ b/arch/arm/mach-s5pv210/gpiolib.c @@ -150,6 +150,7 @@ static struct s3c_gpio_chip s5pv210_gpio_4bit[] = { .label = "GPG3", }, }, { + .config = &gpio_cfg_noint, .chip = { .base = S5PV210_GPI(0), .ngpio = S5PV210_GPIO_I_NR, @@ -223,34 +224,42 @@ static struct s3c_gpio_chip s5pv210_gpio_4bit[] = { }, { .base = (S5P_VA_GPIO + 0xC00), .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(0), .chip = { .base = S5PV210_GPH0(0), .ngpio = S5PV210_GPIO_H0_NR, .label = "GPH0", + .to_irq = samsung_gpiolib_to_irq, }, }, { .base = (S5P_VA_GPIO + 0xC20), .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(8), .chip = { .base = S5PV210_GPH1(0), .ngpio = S5PV210_GPIO_H1_NR, .label = "GPH1", + .to_irq = samsung_gpiolib_to_irq, }, }, { .base = (S5P_VA_GPIO + 0xC40), .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(16), .chip = { .base = S5PV210_GPH2(0), .ngpio = S5PV210_GPIO_H2_NR, .label = "GPH2", + .to_irq = samsung_gpiolib_to_irq, }, }, { .base = (S5P_VA_GPIO + 0xC60), .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(24), .chip = { .base = S5PV210_GPH3(0), .ngpio = S5PV210_GPIO_H3_NR, .label = "GPH3", + .to_irq = samsung_gpiolib_to_irq, }, }, }; @@ -259,11 +268,14 @@ static __init int s5pv210_gpiolib_init(void) { struct s3c_gpio_chip *chip = s5pv210_gpio_4bit; int nr_chips = ARRAY_SIZE(s5pv210_gpio_4bit); + int gpioint_group = 0; int i = 0; for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) + if (chip->config == NULL) { chip->config = &gpio_cfg; + chip->group = gpioint_group++; + } if (chip->base == NULL) chip->base = S5PV210_BANK_BASE(i); } diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h index e1c020e..bb7f277 100644 --- a/arch/arm/mach-s5pv210/include/mach/irqs.h +++ b/arch/arm/mach-s5pv210/include/mach/irqs.h @@ -109,7 +109,7 @@ #define IRQ_IPC S5P_IRQ_VIC3(0) #define IRQ_HOSTIF S5P_IRQ_VIC3(1) -#define IRQ_MMC3 S5P_IRQ_VIC3(2) +#define IRQ_HSMMC3 S5P_IRQ_VIC3(2) #define IRQ_CEC S5P_IRQ_VIC3(3) #define IRQ_TSI S5P_IRQ_VIC3(4) #define IRQ_MDNIE0 S5P_IRQ_VIC3(5) @@ -121,8 +121,12 @@ #define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) #define S5P_EINT_BASE2 (IRQ_VIC_END + 1) +/* GPIO interrupt */ +#define S5P_GPIOINT_BASE (IRQ_EINT(31) + 1) +#define S5P_GPIOINT_GROUP_MAXNR 22 + /* Set the default NR_IRQS */ -#define NR_IRQS (IRQ_EINT(31) + 1) +#define NR_IRQS (IRQ_EINT(31) + S5P_GPIOINT_COUNT + 1) /* Compatibility */ #define IRQ_LCD_FIFO IRQ_LCD0 diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h index bd9afd5..0e24ba1 100644 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -57,6 +57,8 @@ #define S5P_SZ_UART SZ_256 +#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) + #define S5PV210_PA_SROMC (0xE8000000) #define S5PV210_PA_CFCON (0xE8200000) @@ -73,6 +75,9 @@ #define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000)) +#define S5PV210_PA_HSOTG (0xEC000000) +#define S5PV210_PA_HSPHY (0xEC100000) + #define S5PV210_PA_VIC0 (0xF2000000) #define S5PV210_PA_VIC1 (0xF2100000) #define S5PV210_PA_VIC2 (0xF2200000) @@ -96,6 +101,9 @@ #define S5PV210_PA_ADC (0xE1700000) +#define S5PV210_PA_DMC0 (0xF0000000) +#define S5PV210_PA_DMC1 (0xF1400000) + /* compatibiltiy defines. */ #define S3C_PA_UART S5PV210_PA_UART #define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0) @@ -108,6 +116,7 @@ #define S3C_PA_FB S5PV210_PA_FB #define S3C_PA_RTC S5PV210_PA_RTC #define S3C_PA_WDT S5PV210_PA_WATCHDOG +#define S3C_PA_USB_HSOTG S5PV210_PA_HSOTG #define S5P_PA_FIMC0 S5PV210_PA_FIMC0 #define S5P_PA_FIMC1 S5PV210_PA_FIMC1 #define S5P_PA_FIMC2 S5PV210_PA_FIMC2 diff --git a/arch/arm/mach-s5pv210/include/mach/pm-core.h b/arch/arm/mach-s5pv210/include/mach/pm-core.h new file mode 100644 index 0000000..e8d394f --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/pm-core.h @@ -0,0 +1,43 @@ +/* linux/arch/arm/mach-s5pv210/include/mach/pm-core.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Based on arch/arm/mach-s3c2410/include/mach/pm-core.h, + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S5PV210 - PM core support for arch/arm/plat-s5p/pm.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +static inline void s3c_pm_debug_init_uart(void) +{ + /* nothing here yet */ +} + +static inline void s3c_pm_arch_prepare_irqs(void) +{ + __raw_writel(s3c_irqwake_intmask, S5P_WAKEUP_MASK); + __raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK); +} + +static inline void s3c_pm_arch_stop_clocks(void) +{ + /* nothing here yet */ +} + +static inline void s3c_pm_arch_show_resume_irqs(void) +{ + /* nothing here yet */ +} + +static inline void s3c_pm_arch_update_uart(void __iomem *regs, + struct pm_uart_save *save) +{ + /* nothing here yet */ +} diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h index 499aef7..929fd3a 100644 --- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h +++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h @@ -95,7 +95,7 @@ /* Registers related to power management */ #define S5P_PWR_CFG S5P_CLKREG(0xC000) #define S5P_EINT_WAKEUP_MASK S5P_CLKREG(0xC004) -#define S5P_WAKEUP_MASK S5P_CLKREG(0xC008) +#define S5P_WAKEUP_MASK S5P_CLKREG(0xC008) #define S5P_PWR_MODE S5P_CLKREG(0xC00C) #define S5P_NORMAL_CFG S5P_CLKREG(0xC010) #define S5P_IDLE_CFG S5P_CLKREG(0xC020) @@ -159,8 +159,11 @@ #define S5P_SLEEP_CFG_USBOSC_EN (1 << 1) /* OTHERS Resgister */ +#define S5P_OTHERS_RET_IO (1 << 31) +#define S5P_OTHERS_RET_CF (1 << 30) +#define S5P_OTHERS_RET_MMC (1 << 29) +#define S5P_OTHERS_RET_UART (1 << 28) #define S5P_OTHERS_USB_SIG_MASK (1 << 16) -#define S5P_OTHERS_MIPI_DPHY_EN (1 << 28) /* MIPI */ #define S5P_MIPI_DPHY_EN (3) diff --git a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h index 49e029b..de0c899 100644 --- a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h +++ b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h @@ -31,13 +31,6 @@ #define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7)) -/* values for S5P_EXTINT0 */ -#define S5P_EXTINT_LOWLEV (0x00) -#define S5P_EXTINT_HILEV (0x01) -#define S5P_EXTINT_FALLEDGE (0x02) -#define S5P_EXTINT_RISEEDGE (0x03) -#define S5P_EXTINT_BOTHEDGE (0x04) - #define EINT_MODE S3C_GPIO_SFN(0xf) #define EINT_GPIO_0(x) S5PV210_GPH0(x) diff --git a/arch/arm/mach-s5pv210/include/mach/regs-sys.h b/arch/arm/mach-s5pv210/include/mach/regs-sys.h new file mode 100644 index 0000000..26691d3 --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/regs-sys.h @@ -0,0 +1,19 @@ +/* arch/arm/mach-s5pv210/include/mach/regs-sys.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV210 - System registers definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S5PV210_USB_PHY_CON (S3C_VA_SYS + 0xE80C) +#define S5PV210_USB_PHY0_EN (1 << 0) +#define S5PV210_USB_PHY1_EN (1 << 1) + +/* compatibility defines for s3c-hsotg driver */ +#define S3C64XX_OTHERS S5PV210_USB_PHY_CON +#define S3C64XX_OTHERS_USBMASK S5PV210_USB_PHY0_EN diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index fdc5cca..1bae3f1 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -15,7 +15,12 @@ #include <linux/fb.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> +#include <linux/i2c/qt602240_ts.h> #include <linux/mfd/max8998.h> +#include <linux/regulator/fixed.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi_gpio.h> +#include <linux/lcd.h> #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/gpio.h> @@ -35,7 +40,10 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <plat/fb.h> +#include <plat/iic.h> +#include <plat/keypad.h> #include <plat/sdhci.h> +#include <plat/clock.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -87,13 +95,12 @@ static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = { /* Frame Buffer */ static struct s3c_fb_pd_win goni_fb_win0 = { .win_mode = { - .pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*55), .left_margin = 16, .right_margin = 16, - .upper_margin = 3, + .upper_margin = 2, .lower_margin = 28, .hsync_len = 2, - .vsync_len = 2, + .vsync_len = 1, .xres = 480, .yres = 800, .refresh = 55, @@ -111,9 +118,160 @@ static struct s3c_fb_platdata goni_lcd_pdata __initdata = { .setup_gpio = s5pv210_fb_gpio_setup_24bpp, }; +static int lcd_power_on(struct lcd_device *ld, int enable) +{ + return 1; +} + +static int reset_lcd(struct lcd_device *ld) +{ + static unsigned int first = 1; + int reset_gpio = -1; + + reset_gpio = S5PV210_MP05(5); + + if (first) { + gpio_request(reset_gpio, "MLCD_RST"); + first = 0; + } + + gpio_direction_output(reset_gpio, 1); + return 1; +} + +static struct lcd_platform_data goni_lcd_platform_data = { + .reset = reset_lcd, + .power_on = lcd_power_on, + .lcd_enabled = 0, + .reset_delay = 120, /* 120ms */ + .power_on_delay = 25, /* 25ms */ + .power_off_delay = 200, /* 200ms */ +}; + +#define LCD_BUS_NUM 3 +static struct spi_board_info spi_board_info[] __initdata = { + { + .modalias = "s6e63m0", + .platform_data = &goni_lcd_platform_data, + .max_speed_hz = 1200000, + .bus_num = LCD_BUS_NUM, + .chip_select = 0, + .mode = SPI_MODE_3, + .controller_data = (void *)S5PV210_MP01(1), /* DISPLAY_CS */ + }, +}; + +static struct spi_gpio_platform_data lcd_spi_gpio_data = { + .sck = S5PV210_MP04(1), /* DISPLAY_CLK */ + .mosi = S5PV210_MP04(3), /* DISPLAY_SI */ + .miso = SPI_GPIO_NO_MISO, + .num_chipselect = 1, +}; + +static struct platform_device goni_spi_gpio = { + .name = "spi_gpio", + .id = LCD_BUS_NUM, + .dev = { + .parent = &s3c_device_fb.dev, + .platform_data = &lcd_spi_gpio_data, + }, +}; + +/* KEYPAD */ +static uint32_t keymap[] __initdata = { + /* KEY(row, col, keycode) */ + KEY(0, 1, KEY_MENU), /* Send */ + KEY(0, 2, KEY_BACK), /* End */ + KEY(1, 1, KEY_CONFIG), /* Half shot */ + KEY(1, 2, KEY_VOLUMEUP), + KEY(2, 1, KEY_CAMERA), /* Full shot */ + KEY(2, 2, KEY_VOLUMEDOWN), +}; + +static struct matrix_keymap_data keymap_data __initdata = { + .keymap = keymap, + .keymap_size = ARRAY_SIZE(keymap), +}; + +static struct samsung_keypad_platdata keypad_data __initdata = { + .keymap_data = &keymap_data, + .rows = 3, + .cols = 3, +}; + +/* Radio */ +static struct i2c_board_info i2c1_devs[] __initdata = { + { + I2C_BOARD_INFO("si470x", 0x10), + }, +}; + +static void __init goni_radio_init(void) +{ + int gpio; + + gpio = S5PV210_GPJ2(4); /* XMSMDATA_4 */ + gpio_request(gpio, "FM_INT"); + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); + i2c1_devs[0].irq = gpio_to_irq(gpio); + + gpio = S5PV210_GPJ2(5); /* XMSMDATA_5 */ + gpio_request(gpio, "FM_RST"); + gpio_direction_output(gpio, 1); +} + +/* TSP */ +static struct qt602240_platform_data qt602240_platform_data = { + .x_line = 17, + .y_line = 11, + .x_size = 800, + .y_size = 480, + .blen = 0x21, + .threshold = 0x28, + .voltage = 2800000, /* 2.8V */ + .orient = QT602240_DIAGONAL, +}; + +static struct s3c2410_platform_i2c i2c2_data __initdata = { + .flags = 0, + .bus_num = 2, + .slave_addr = 0x10, + .frequency = 400 * 1000, + .sda_delay = 100, +}; + +static struct i2c_board_info i2c2_devs[] __initdata = { + { + I2C_BOARD_INFO("qt602240_ts", 0x4a), + .platform_data = &qt602240_platform_data, + }, +}; + +static void __init goni_tsp_init(void) +{ + int gpio; + + gpio = S5PV210_GPJ1(3); /* XMSMADDR_11 */ + gpio_request(gpio, "TSP_LDO_ON"); + gpio_direction_output(gpio, 1); + gpio_export(gpio, 0); + + gpio = S5PV210_GPJ0(5); /* XMSMADDR_5 */ + gpio_request(gpio, "TSP_INT"); + + s5p_register_gpio_interrupt(gpio); + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); + i2c2_devs[0].irq = gpio_to_irq(gpio); +} + /* MAX8998 regulators */ #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) +static struct regulator_consumer_supply goni_ldo5_consumers[] = { + REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"), +}; + static struct regulator_init_data goni_ldo2_data = { .constraints = { .name = "VALIVE_1.1V", @@ -153,6 +311,8 @@ static struct regulator_init_data goni_ldo5_data = { .max_uV = 2800000, .apply_uV = 1, }, + .num_consumer_supplies = ARRAY_SIZE(goni_ldo5_consumers), + .consumer_supplies = goni_ldo5_consumers, }; static struct regulator_init_data goni_ldo6_data = { @@ -444,11 +604,37 @@ static struct s3c_sdhci_platdata goni_hsmmc2_data __initdata = { .ext_cd_gpio_invert = 1, }; +static struct regulator_consumer_supply mmc2_supplies[] = { + REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"), +}; + +static struct regulator_init_data mmc2_fixed_voltage_init_data = { + .constraints = { + .name = "V_TF_2.8V", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(mmc2_supplies), + .consumer_supplies = mmc2_supplies, +}; + +static struct fixed_voltage_config mmc2_fixed_voltage_config = { + .supply_name = "EXT_FLASH_EN", + .microvolts = 2800000, + .gpio = GONI_EXT_FLASH_EN, + .enable_high = true, + .init_data = &mmc2_fixed_voltage_init_data, +}; + +static struct platform_device mmc2_fixed_voltage = { + .name = "reg-fixed-voltage", + .id = 2, + .dev = { + .platform_data = &mmc2_fixed_voltage_config, + }, +}; + static void goni_setup_sdhci(void) { - gpio_request(GONI_EXT_FLASH_EN, "FLASH_EN"); - gpio_direction_output(GONI_EXT_FLASH_EN, 1); - s3c_sdhci0_set_platdata(&goni_hsmmc0_data); s3c_sdhci1_set_platdata(&goni_hsmmc1_data); s3c_sdhci2_set_platdata(&goni_hsmmc2_data); @@ -457,7 +643,9 @@ static void goni_setup_sdhci(void) static struct platform_device *goni_devices[] __initdata = { &s3c_device_fb, &s5p_device_onenand, + &goni_spi_gpio, &goni_i2c_gpio_pmic, + &mmc2_fixed_voltage, &goni_device_gpiokeys, &s5p_device_fimc0, &s5p_device_fimc1, @@ -465,6 +653,10 @@ static struct platform_device *goni_devices[] __initdata = { &s3c_device_hsmmc0, &s3c_device_hsmmc1, &s3c_device_hsmmc2, + &s3c_device_usb_hsotg, + &samsung_device_keypad, + &s3c_device_i2c1, + &s3c_device_i2c2, }; static void __init goni_map_io(void) @@ -476,6 +668,20 @@ static void __init goni_map_io(void) static void __init goni_machine_init(void) { + /* Radio: call before I2C 1 registeration */ + goni_radio_init(); + + /* I2C1 */ + s3c_i2c1_set_platdata(NULL); + i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); + + /* TSP: call before I2C 2 registeration */ + goni_tsp_init(); + + /* I2C2 */ + s3c_i2c2_set_platdata(&i2c2_data); + i2c_register_board_info(2, i2c2_devs, ARRAY_SIZE(i2c2_devs)); + /* PMIC */ goni_pmic_init(); i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs, @@ -486,6 +692,14 @@ static void __init goni_machine_init(void) /* FB */ s3c_fb_set_platdata(&goni_lcd_pdata); + /* SPI */ + spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); + + /* KEYPAD */ + samsung_keypad_set_platdata(&keypad_data); + + clk_xusbxti.rate = 24000000; + platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices)); } diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c index 8211bb8..053b50d 100644 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ b/arch/arm/mach-s5pv210/mach-smdkc110.c @@ -28,6 +28,7 @@ #include <plat/cpu.h> #include <plat/ata.h> #include <plat/iic.h> +#include <plat/pm.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define SMDKC110_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -110,6 +111,8 @@ static void __init smdkc110_map_io(void) static void __init smdkc110_machine_init(void) { + s3c_pm_init(); + s3c_i2c0_set_platdata(NULL); s3c_i2c1_set_platdata(NULL); s3c_i2c2_set_platdata(NULL); diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index fbbc0a3..5a9c79c 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -31,6 +31,7 @@ #include <plat/ata.h> #include <plat/iic.h> #include <plat/keypad.h> +#include <plat/pm.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define SMDKV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -145,6 +146,8 @@ static void __init smdkv210_map_io(void) static void __init smdkv210_machine_init(void) { + s3c_pm_init(); + samsung_keypad_set_platdata(&smdkv210_keypad_data); s3c24xx_ts_set_platdata(&s3c_ts_platform); diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c new file mode 100644 index 0000000..043c938 --- /dev/null +++ b/arch/arm/mach-s5pv210/mach-torbreck.c @@ -0,0 +1,131 @@ +/* linux/arch/arm/mach-s5pv210/mach-torbreck.c + * + * Copyright (c) 2010 aESOP Community + * http://www.aesop.or.kr/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/serial_core.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/setup.h> +#include <asm/mach-types.h> + +#include <mach/map.h> +#include <mach/regs-clock.h> + +#include <plat/regs-serial.h> +#include <plat/s5pv210.h> +#include <plat/devs.h> +#include <plat/cpu.h> +#include <plat/iic.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define TORBRECK_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define TORBRECK_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define TORBRECK_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +static struct s3c2410_uartcfg torbreck_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = TORBRECK_UCON_DEFAULT, + .ulcon = TORBRECK_ULCON_DEFAULT, + .ufcon = TORBRECK_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = TORBRECK_UCON_DEFAULT, + .ulcon = TORBRECK_ULCON_DEFAULT, + .ufcon = TORBRECK_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = TORBRECK_UCON_DEFAULT, + .ulcon = TORBRECK_ULCON_DEFAULT, + .ufcon = TORBRECK_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = TORBRECK_UCON_DEFAULT, + .ulcon = TORBRECK_ULCON_DEFAULT, + .ufcon = TORBRECK_UFCON_DEFAULT, + }, +}; + +static struct platform_device *torbreck_devices[] __initdata = { + &s5pv210_device_iis0, + &s3c_device_cfcon, + &s3c_device_hsmmc0, + &s3c_device_hsmmc1, + &s3c_device_hsmmc2, + &s3c_device_hsmmc3, + &s3c_device_i2c0, + &s3c_device_i2c1, + &s3c_device_i2c2, + &s3c_device_rtc, + &s3c_device_wdt, +}; + +static struct i2c_board_info torbreck_i2c_devs0[] __initdata = { + /* To Be Updated */ +}; + +static struct i2c_board_info torbreck_i2c_devs1[] __initdata = { + /* To Be Updated */ +}; + +static struct i2c_board_info torbreck_i2c_devs2[] __initdata = { + /* To Be Updated */ +}; + +static void __init torbreck_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(torbreck_uartcfgs, ARRAY_SIZE(torbreck_uartcfgs)); +} + +static void __init torbreck_machine_init(void) +{ + s3c_i2c0_set_platdata(NULL); + s3c_i2c1_set_platdata(NULL); + s3c_i2c2_set_platdata(NULL); + i2c_register_board_info(0, torbreck_i2c_devs0, + ARRAY_SIZE(torbreck_i2c_devs0)); + i2c_register_board_info(1, torbreck_i2c_devs1, + ARRAY_SIZE(torbreck_i2c_devs1)); + i2c_register_board_info(2, torbreck_i2c_devs2, + ARRAY_SIZE(torbreck_i2c_devs2)); + + platform_add_devices(torbreck_devices, ARRAY_SIZE(torbreck_devices)); +} + +MACHINE_START(TORBRECK, "TORBRECK") + /* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */ + .boot_params = S5P_PA_SDRAM + 0x100, + .init_irq = s5pv210_init_irq, + .map_io = torbreck_map_io, + .init_machine = torbreck_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c new file mode 100644 index 0000000..549d792 --- /dev/null +++ b/arch/arm/mach-s5pv210/pm.c @@ -0,0 +1,166 @@ +/* linux/arch/arm/mach-s5pv210/pm.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5PV210 - Power Management support + * + * Based on arch/arm/mach-s3c2410/pm.c + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/suspend.h> +#include <linux/io.h> + +#include <plat/cpu.h> +#include <plat/pm.h> +#include <plat/regs-timer.h> + +#include <mach/regs-irq.h> +#include <mach/regs-clock.h> + +static struct sleep_save s5pv210_core_save[] = { + /* Clock source */ + SAVE_ITEM(S5P_CLK_SRC0), + SAVE_ITEM(S5P_CLK_SRC1), + SAVE_ITEM(S5P_CLK_SRC2), + SAVE_ITEM(S5P_CLK_SRC3), + SAVE_ITEM(S5P_CLK_SRC4), + SAVE_ITEM(S5P_CLK_SRC5), + SAVE_ITEM(S5P_CLK_SRC6), + + /* Clock source Mask */ + SAVE_ITEM(S5P_CLK_SRC_MASK0), + SAVE_ITEM(S5P_CLK_SRC_MASK1), + + /* Clock Divider */ + SAVE_ITEM(S5P_CLK_DIV0), + SAVE_ITEM(S5P_CLK_DIV1), + SAVE_ITEM(S5P_CLK_DIV2), + SAVE_ITEM(S5P_CLK_DIV3), + SAVE_ITEM(S5P_CLK_DIV4), + SAVE_ITEM(S5P_CLK_DIV5), + SAVE_ITEM(S5P_CLK_DIV6), + SAVE_ITEM(S5P_CLK_DIV7), + + /* Clock Main Gate */ + SAVE_ITEM(S5P_CLKGATE_MAIN0), + SAVE_ITEM(S5P_CLKGATE_MAIN1), + SAVE_ITEM(S5P_CLKGATE_MAIN2), + + /* Clock source Peri Gate */ + SAVE_ITEM(S5P_CLKGATE_PERI0), + SAVE_ITEM(S5P_CLKGATE_PERI1), + + /* Clock source SCLK Gate */ + SAVE_ITEM(S5P_CLKGATE_SCLK0), + SAVE_ITEM(S5P_CLKGATE_SCLK1), + + /* Clock IP Clock gate */ + SAVE_ITEM(S5P_CLKGATE_IP0), + SAVE_ITEM(S5P_CLKGATE_IP1), + SAVE_ITEM(S5P_CLKGATE_IP2), + SAVE_ITEM(S5P_CLKGATE_IP3), + SAVE_ITEM(S5P_CLKGATE_IP4), + + /* Clock Blcok and Bus gate */ + SAVE_ITEM(S5P_CLKGATE_BLOCK), + SAVE_ITEM(S5P_CLKGATE_BUS0), + + /* Clock ETC */ + SAVE_ITEM(S5P_CLK_OUT), + SAVE_ITEM(S5P_MDNIE_SEL), + + /* PWM Register */ + SAVE_ITEM(S3C2410_TCFG0), + SAVE_ITEM(S3C2410_TCFG1), + SAVE_ITEM(S3C64XX_TINT_CSTAT), + SAVE_ITEM(S3C2410_TCON), + SAVE_ITEM(S3C2410_TCNTB(0)), + SAVE_ITEM(S3C2410_TCMPB(0)), + SAVE_ITEM(S3C2410_TCNTO(0)), +}; + +void s5pv210_cpu_suspend(void) +{ + unsigned long tmp; + + /* issue the standby signal into the pm unit. Note, we + * issue a write-buffer drain just in case */ + + tmp = 0; + + asm("b 1f\n\t" + ".align 5\n\t" + "1:\n\t" + "mcr p15, 0, %0, c7, c10, 5\n\t" + "mcr p15, 0, %0, c7, c10, 4\n\t" + "wfi" : : "r" (tmp)); + + /* we should never get past here */ + panic("sleep resumed to originator?"); +} + +static void s5pv210_pm_prepare(void) +{ + unsigned int tmp; + + /* ensure at least INFORM0 has the resume address */ + __raw_writel(virt_to_phys(s3c_cpu_resume), S5P_INFORM0); + + tmp = __raw_readl(S5P_SLEEP_CFG); + tmp &= ~(S5P_SLEEP_CFG_OSC_EN | S5P_SLEEP_CFG_USBOSC_EN); + __raw_writel(tmp, S5P_SLEEP_CFG); + + /* WFI for SLEEP mode configuration by SYSCON */ + tmp = __raw_readl(S5P_PWR_CFG); + tmp &= S5P_CFG_WFI_CLEAN; + tmp |= S5P_CFG_WFI_SLEEP; + __raw_writel(tmp, S5P_PWR_CFG); + + /* SYSCON interrupt handling disable */ + tmp = __raw_readl(S5P_OTHERS); + tmp |= S5P_OTHER_SYSC_INTOFF; + __raw_writel(tmp, S5P_OTHERS); + + s3c_pm_do_save(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save)); +} + +static int s5pv210_pm_add(struct sys_device *sysdev) +{ + pm_cpu_prep = s5pv210_pm_prepare; + pm_cpu_sleep = s5pv210_cpu_suspend; + + return 0; +} + +static int s5pv210_pm_resume(struct sys_device *dev) +{ + u32 tmp; + + tmp = __raw_readl(S5P_OTHERS); + tmp |= (S5P_OTHERS_RET_IO | S5P_OTHERS_RET_CF |\ + S5P_OTHERS_RET_MMC | S5P_OTHERS_RET_UART); + __raw_writel(tmp , S5P_OTHERS); + + s3c_pm_do_restore_core(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save)); + + return 0; +} + +static struct sysdev_driver s5pv210_pm_driver = { + .add = s5pv210_pm_add, + .resume = s5pv210_pm_resume, +}; + +static __init int s5pv210_pm_drvinit(void) +{ + return sysdev_driver_register(&s5pv210_sysclass, &s5pv210_pm_driver); +} +arch_initcall(s5pv210_pm_drvinit); diff --git a/arch/arm/mach-s5pv210/sleep.S b/arch/arm/mach-s5pv210/sleep.S new file mode 100644 index 0000000..d4d222b --- /dev/null +++ b/arch/arm/mach-s5pv210/sleep.S @@ -0,0 +1,170 @@ +/* linux/arch/arm/plat-s5p/sleep.S + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5PV210 power Manager (Suspend-To-RAM) support + * Based on S3C2410 sleep code by: + * Ben Dooks, (c) 2004 Simtec Electronics + * + * Based on PXA/SA1100 sleep code by: + * Nicolas Pitre, (c) 2002 Monta Vista Software Inc + * Cliff Brake, (c) 2001 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/memory.h> + + .text + + /* s3c_cpu_save + * + * entry: + * r0 = save address (virtual addr of s3c_sleep_save_phys) + */ + +ENTRY(s3c_cpu_save) + + stmfd sp!, { r3 - r12, lr } + + mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID + mrc p15, 0, r5, c3, c0, 0 @ Domain ID + mrc p15, 0, r6, c2, c0, 0 @ Translation Table BASE0 + mrc p15, 0, r7, c2, c0, 1 @ Translation Table BASE1 + mrc p15, 0, r8, c2, c0, 2 @ Translation Table Control + mrc p15, 0, r9, c1, c0, 0 @ Control register + mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register + mrc p15, 0, r11, c1, c0, 2 @ Co-processor access controls + mrc p15, 0, r12, c10, c2, 0 @ Read PRRR + mrc p15, 0, r3, c10, c2, 1 @ READ NMRR + + stmia r0, { r3 - r13 } + + bl s3c_pm_cb_flushcache + + ldr r0, =pm_cpu_sleep + ldr r0, [ r0 ] + mov pc, r0 + +resume_with_mmu: + /* + * After MMU is turned on, restore the previous MMU table. + */ + ldr r9 , =(PAGE_OFFSET - PHYS_OFFSET) + add r4, r4, r9 + str r12, [r4] + + ldmfd sp!, { r3 - r12, pc } + + .ltorg + + .data + + .global s3c_sleep_save_phys +s3c_sleep_save_phys: + .word 0 + + /* sleep magic, to allow the bootloader to check for an valid + * image to resume to. Must be the first word before the + * s3c_cpu_resume entry. + */ + + .word 0x2bedf00d + + /* s3c_cpu_resume + * + * resume code entry for bootloader to call + * + * we must put this code here in the data segment as we have no + * other way of restoring the stack pointer after sleep, and we + * must not write to the code segment (code is read-only) + */ + +ENTRY(s3c_cpu_resume) + mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE + msr cpsr_c, r0 + + mov r1, #0 + mcr p15, 0, r1, c8, c7, 0 @ invalidate TLBs + mcr p15, 0, r1, c7, c5, 0 @ invalidate I Cache + + ldr r0, s3c_sleep_save_phys @ address of restore block + ldmia r0, { r3 - r13 } + + mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID + mcr p15, 0, r5, c3, c0, 0 @ Domain ID + + mcr p15, 0, r8, c2, c0, 2 @ Translation Table Control + mcr p15, 0, r7, c2, c0, 1 @ Translation Table BASE1 + mcr p15, 0, r6, c2, c0, 0 @ Translation Table BASE0 + + mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register + + mov r0, #0 + mcr p15, 0, r0, c8, c7, 0 @ Invalidate I & D TLB + + mov r0, #0 @ restore copro access + mcr p15, 0, r11, c1, c0, 2 @ Co-processor access + mcr p15, 0, r0, c7, c5, 4 + + mcr p15, 0, r12, c10, c2, 0 @ write PRRR + mcr p15, 0, r3, c10, c2, 1 @ write NMRR + + /* + * In Cortex-A8, when MMU is turned on, the pipeline is flushed. + * And there are no valid entries in the MMU table at this point. + * So before turning on the MMU, the MMU entry for the DRAM address + * range is added. After the MMU is turned on, the other entries + * in the MMU table will be restored. + */ + + /* r6 = Translation Table BASE0 */ + mov r4, r6 + mov r4, r4, LSR #14 + mov r4, r4, LSL #14 + + /* Load address for adding to MMU table list */ + ldr r11, =0xE010F000 @ INFORM0 reg. + ldr r10, [r11, #0] + mov r10, r10, LSR #18 + bic r10, r10, #0x3 + orr r4, r4, r10 + + /* Calculate MMU table entry */ + mov r10, r10, LSL #18 + ldr r5, =0x40E + orr r10, r10, r5 + + /* Back up originally data */ + ldr r12, [r4] + + /* Add calculated MMU table entry into MMU table list */ + str r10, [r4] + + ldr r2, =resume_with_mmu + mcr p15, 0, r9, c1, c0, 0 @ turn on MMU, etc + + nop + nop + nop + nop + nop @ second-to-last before mmu + + mov pc, r2 @ go back to virtual address + + .ltorg |