diff options
Diffstat (limited to 'arch/arm/mach-spear3xx/spear3xx.c')
-rw-r--r-- | arch/arm/mach-spear3xx/spear3xx.c | 548 |
1 files changed, 548 insertions, 0 deletions
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c new file mode 100644 index 0000000..e87313a --- /dev/null +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -0,0 +1,548 @@ +/* + * arch/arm/mach-spear3xx/spear3xx.c + * + * SPEAr3XX machines common source file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/types.h> +#include <linux/amba/pl061.h> +#include <linux/ptrace.h> +#include <linux/io.h> +#include <asm/hardware/vic.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <mach/generic.h> +#include <mach/spear.h> + +/* Add spear3xx machines common devices here */ +/* gpio device registeration */ +static struct pl061_platform_data gpio_plat_data = { + .gpio_base = 0, + .irq_base = SPEAR_GPIO_INT_BASE, +}; + +struct amba_device gpio_device = { + .dev = { + .init_name = "gpio", + .platform_data = &gpio_plat_data, + }, + .res = { + .start = SPEAR3XX_ICM3_GPIO_BASE, + .end = SPEAR3XX_ICM3_GPIO_BASE + SPEAR3XX_ICM3_GPIO_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_BASIC_GPIO, NO_IRQ}, +}; + +/* uart device registeration */ +struct amba_device uart_device = { + .dev = { + .init_name = "uart", + }, + .res = { + .start = SPEAR3XX_ICM1_UART_BASE, + .end = SPEAR3XX_ICM1_UART_BASE + SPEAR3XX_ICM1_UART_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_UART, NO_IRQ}, +}; + +/* Do spear3xx familiy common initialization part here */ +void __init spear3xx_init(void) +{ + /* nothing to do for now */ +} + +/* This will initialize vic */ +void __init spear3xx_init_irq(void) +{ + vic_init((void __iomem *)VA_SPEAR3XX_ML1_VIC_BASE, 0, ~0, 0); +} + +/* Following will create static virtual/physical mappings */ +struct map_desc spear3xx_io_desc[] __initdata = { + { + .virtual = VA_SPEAR3XX_ICM1_UART_BASE, + .pfn = __phys_to_pfn(SPEAR3XX_ICM1_UART_BASE), + .length = SPEAR3XX_ICM1_UART_SIZE, + .type = MT_DEVICE + }, { + .virtual = VA_SPEAR3XX_ML1_VIC_BASE, + .pfn = __phys_to_pfn(SPEAR3XX_ML1_VIC_BASE), + .length = SPEAR3XX_ML1_VIC_SIZE, + .type = MT_DEVICE + }, { + .virtual = VA_SPEAR3XX_ICM3_SYS_CTRL_BASE, + .pfn = __phys_to_pfn(SPEAR3XX_ICM3_SYS_CTRL_BASE), + .length = SPEAR3XX_ICM3_SYS_CTRL_SIZE, + .type = MT_DEVICE + }, { + .virtual = VA_SPEAR3XX_ICM3_MISC_REG_BASE, + .pfn = __phys_to_pfn(SPEAR3XX_ICM3_MISC_REG_BASE), + .length = SPEAR3XX_ICM3_MISC_REG_SIZE, + .type = MT_DEVICE + }, +}; + +/* This will create static memory mapping for selected devices */ +void __init spear3xx_map_io(void) +{ + iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc)); + + /* This will initialize clock framework */ + clk_init(); +} + +/* pad multiplexing support */ +/* devices */ +struct pmx_dev_mode pmx_firda_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_FIRDA_MASK, + }, +}; + +struct pmx_dev pmx_firda = { + .name = "firda", + .modes = pmx_firda_modes, + .mode_count = ARRAY_SIZE(pmx_firda_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_i2c_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_I2C_MASK, + }, +}; + +struct pmx_dev pmx_i2c = { + .name = "i2c", + .modes = pmx_i2c_modes, + .mode_count = ARRAY_SIZE(pmx_i2c_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_ssp_cs_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_SSP_CS_MASK, + }, +}; + +struct pmx_dev pmx_ssp_cs = { + .name = "ssp_chip_selects", + .modes = pmx_ssp_cs_modes, + .mode_count = ARRAY_SIZE(pmx_ssp_cs_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_ssp_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_SSP_MASK, + }, +}; + +struct pmx_dev pmx_ssp = { + .name = "ssp", + .modes = pmx_ssp_modes, + .mode_count = ARRAY_SIZE(pmx_ssp_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_mii_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_MII_MASK, + }, +}; + +struct pmx_dev pmx_mii = { + .name = "mii", + .modes = pmx_mii_modes, + .mode_count = ARRAY_SIZE(pmx_mii_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_gpio_pin0_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_GPIO_PIN0_MASK, + }, +}; + +struct pmx_dev pmx_gpio_pin0 = { + .name = "gpio_pin0", + .modes = pmx_gpio_pin0_modes, + .mode_count = ARRAY_SIZE(pmx_gpio_pin0_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_gpio_pin1_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_GPIO_PIN1_MASK, + }, +}; + +struct pmx_dev pmx_gpio_pin1 = { + .name = "gpio_pin1", + .modes = pmx_gpio_pin1_modes, + .mode_count = ARRAY_SIZE(pmx_gpio_pin1_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_gpio_pin2_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_GPIO_PIN2_MASK, + }, +}; + +struct pmx_dev pmx_gpio_pin2 = { + .name = "gpio_pin2", + .modes = pmx_gpio_pin2_modes, + .mode_count = ARRAY_SIZE(pmx_gpio_pin2_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_gpio_pin3_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_GPIO_PIN3_MASK, + }, +}; + +struct pmx_dev pmx_gpio_pin3 = { + .name = "gpio_pin3", + .modes = pmx_gpio_pin3_modes, + .mode_count = ARRAY_SIZE(pmx_gpio_pin3_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_gpio_pin4_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_GPIO_PIN4_MASK, + }, +}; + +struct pmx_dev pmx_gpio_pin4 = { + .name = "gpio_pin4", + .modes = pmx_gpio_pin4_modes, + .mode_count = ARRAY_SIZE(pmx_gpio_pin4_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_gpio_pin5_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_GPIO_PIN5_MASK, + }, +}; + +struct pmx_dev pmx_gpio_pin5 = { + .name = "gpio_pin5", + .modes = pmx_gpio_pin5_modes, + .mode_count = ARRAY_SIZE(pmx_gpio_pin5_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_uart0_modem_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_UART0_MODEM_MASK, + }, +}; + +struct pmx_dev pmx_uart0_modem = { + .name = "uart0_modem", + .modes = pmx_uart0_modem_modes, + .mode_count = ARRAY_SIZE(pmx_uart0_modem_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_uart0_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_UART0_MASK, + }, +}; + +struct pmx_dev pmx_uart0 = { + .name = "uart0", + .modes = pmx_uart0_modes, + .mode_count = ARRAY_SIZE(pmx_uart0_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_timer_3_4_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_TIMER_3_4_MASK, + }, +}; + +struct pmx_dev pmx_timer_3_4 = { + .name = "timer_3_4", + .modes = pmx_timer_3_4_modes, + .mode_count = ARRAY_SIZE(pmx_timer_3_4_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_timer_1_2_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_TIMER_1_2_MASK, + }, +}; + +struct pmx_dev pmx_timer_1_2 = { + .name = "timer_1_2", + .modes = pmx_timer_1_2_modes, + .mode_count = ARRAY_SIZE(pmx_timer_1_2_modes), + .enb_on_reset = 0, +}; + +#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320) +/* plgpios devices */ +struct pmx_dev_mode pmx_plgpio_0_1_modes[] = { + { + .ids = 0x00, + .mask = PMX_FIRDA_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_0_1 = { + .name = "plgpio 0 and 1", + .modes = pmx_plgpio_0_1_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_0_1_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_2_3_modes[] = { + { + .ids = 0x00, + .mask = PMX_UART0_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_2_3 = { + .name = "plgpio 2 and 3", + .modes = pmx_plgpio_2_3_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_2_3_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_4_5_modes[] = { + { + .ids = 0x00, + .mask = PMX_I2C_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_4_5 = { + .name = "plgpio 4 and 5", + .modes = pmx_plgpio_4_5_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_4_5_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_6_9_modes[] = { + { + .ids = 0x00, + .mask = PMX_SSP_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_6_9 = { + .name = "plgpio 6 to 9", + .modes = pmx_plgpio_6_9_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_6_9_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_10_27_modes[] = { + { + .ids = 0x00, + .mask = PMX_MII_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_10_27 = { + .name = "plgpio 10 to 27", + .modes = pmx_plgpio_10_27_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_10_27_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_28_modes[] = { + { + .ids = 0x00, + .mask = PMX_GPIO_PIN0_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_28 = { + .name = "plgpio 28", + .modes = pmx_plgpio_28_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_28_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_29_modes[] = { + { + .ids = 0x00, + .mask = PMX_GPIO_PIN1_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_29 = { + .name = "plgpio 29", + .modes = pmx_plgpio_29_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_29_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_30_modes[] = { + { + .ids = 0x00, + .mask = PMX_GPIO_PIN2_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_30 = { + .name = "plgpio 30", + .modes = pmx_plgpio_30_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_30_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_31_modes[] = { + { + .ids = 0x00, + .mask = PMX_GPIO_PIN3_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_31 = { + .name = "plgpio 31", + .modes = pmx_plgpio_31_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_31_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_32_modes[] = { + { + .ids = 0x00, + .mask = PMX_GPIO_PIN4_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_32 = { + .name = "plgpio 32", + .modes = pmx_plgpio_32_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_32_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_33_modes[] = { + { + .ids = 0x00, + .mask = PMX_GPIO_PIN5_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_33 = { + .name = "plgpio 33", + .modes = pmx_plgpio_33_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_33_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_34_36_modes[] = { + { + .ids = 0x00, + .mask = PMX_SSP_CS_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_34_36 = { + .name = "plgpio 34 to 36", + .modes = pmx_plgpio_34_36_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_34_36_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_37_42_modes[] = { + { + .ids = 0x00, + .mask = PMX_UART0_MODEM_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_37_42 = { + .name = "plgpio 37 to 42", + .modes = pmx_plgpio_37_42_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_37_42_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_43_44_47_48_modes[] = { + { + .ids = 0x00, + .mask = PMX_TIMER_1_2_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_43_44_47_48 = { + .name = "plgpio 43, 44, 47 and 48", + .modes = pmx_plgpio_43_44_47_48_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_43_44_47_48_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_45_46_49_50_modes[] = { + { + .ids = 0x00, + .mask = PMX_TIMER_3_4_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_45_46_49_50 = { + .name = "plgpio 45, 46, 49 and 50", + .modes = pmx_plgpio_45_46_49_50_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_45_46_49_50_modes), + .enb_on_reset = 1, +}; + +#endif + +/* spear padmux initialization function */ +void spear_pmx_init(struct pmx_driver *pmx_driver, uint base, uint size) +{ + int ret = 0; + + /* pad mux initialization */ + pmx_driver->base = ioremap(base, size); + if (!pmx_driver->base) { + ret = -ENOMEM; + goto pmx_fail; + } + + ret = pmx_register(pmx_driver); + iounmap(pmx_driver->base); + +pmx_fail: + if (ret) + printk(KERN_ERR "padmux: registeration failed. err no: %d\n", + ret); +} |