diff options
Diffstat (limited to 'arch')
36 files changed, 1248 insertions, 400 deletions
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 1c0c2b0..64dc417 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -229,7 +229,7 @@ usbfs-$(CONFIG_ARCH_OMAP_OTG) := usb-fs.o obj-y += $(usbfs-m) $(usbfs-y) obj-y += usb-musb.o obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o -obj-y += usb-ehci.o +obj-y += usb-host.o onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o obj-y += $(onenand-m) $(onenand-y) diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index d4e41ef..7542ba5 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -653,11 +653,11 @@ static void enable_board_wakeup_source(void) OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = 57, @@ -816,7 +816,7 @@ static void __init omap_3430sdp_init(void) board_flash_init(sdp_flash_partitions, chip_sel_3430); sdp3430_display_init(); enable_board_wakeup_source(); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); } MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 6264564..deed2db 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -54,11 +54,11 @@ static void enable_board_wakeup_source(void) OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = 126, @@ -211,7 +211,7 @@ static void __init omap_sdp_init(void) board_smc91x_init(); board_flash_init(sdp_flash_partitions, chip_sel_sdp); enable_board_wakeup_source(); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); } MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board") diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 07d1b20..f603f3b 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -44,7 +44,6 @@ #define ETH_KS8851_IRQ 34 #define ETH_KS8851_POWER_ON 48 #define ETH_KS8851_QUART 138 -#define OMAP4SDP_MDM_PWR_EN_GPIO 157 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184 #define OMAP4_SFH7741_ENABLE_GPIO 188 @@ -251,16 +250,6 @@ static void __init omap_4430sdp_init_irq(void) gic_init_irq(); } -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .phy_reset = false, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL, -}; - static struct omap_musb_board_data musb_board_data = { .interface_type = MUSB_INTERFACE_UTMI, .mode = MUSB_OTG, @@ -272,6 +261,7 @@ static struct twl4030_usb_data omap4_usbphy_data = { .phy_exit = omap4430_phy_exit, .phy_power = omap4430_phy_power, .phy_set_clock = omap4430_phy_set_clk, + .phy_suspend = omap4430_phy_suspend, }; static struct omap2_hsmmc_info mmc[] = { @@ -576,14 +566,6 @@ static void __init omap_4430sdp_init(void) omap_serial_init(); omap4_twl6030_hsmmc_init(mmc); - /* Power on the ULPI PHY */ - status = gpio_request(OMAP4SDP_MDM_PWR_EN_GPIO, "USBB1 PHY VMDM_3V3"); - if (status) - pr_err("%s: Could not get USBB1 PHY GPIO\n", __func__); - else - gpio_direction_output(OMAP4SDP_MDM_PWR_EN_GPIO, 1); - - usb_ehci_init(&ehci_pdata); usb_musb_init(&musb_board_data); status = omap_ethernet_init(); diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 71acb5a..e3a194f 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -59,10 +59,10 @@ static void __init am3517_crane_init_irq(void) omap_init_irq(); } -static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static struct usbhs_omap_board_data usbhs_bdata __initdata = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = GPIO_USB_NRESET, @@ -103,7 +103,7 @@ static void __init am3517_crane_init(void) return; } - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); } MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD") diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 10d60b7..913538a 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -430,15 +430,15 @@ static __init void am3517_evm_musb_init(void) usb_musb_init(&musb_board_data); } -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \ defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE) - .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, #else - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, #endif - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = 57, @@ -502,7 +502,7 @@ static void __init am3517_evm_init(void) /* Configure GPIO for EHCI port */ omap_mux_init_gpio(57, OMAP_PIN_OUTPUT); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); am3517_evm_hecc_init(&am3517_evm_hecc_pdata); /* DSS */ am3517_evm_display_init(); diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index dac1416..9be7289 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -605,10 +605,10 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; -static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static struct usbhs_omap_board_data usbhs_bdata __initdata = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = OMAP_MAX_GPIO_LINES + 6, @@ -810,7 +810,7 @@ static void __init cm_t35_init(void) cm_t35_init_display(); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); } MACHINE_START(CM_T35, "Compulab CM-T35") diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 8f9a64d..8e18dc7 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -167,10 +167,10 @@ static inline void cm_t3517_init_rtc(void) {} #define HSUSB2_RESET_GPIO (147) #define USB_HUB_RESET_GPIO (152) -static struct ehci_hcd_omap_platform_data cm_t3517_ehci_pdata __initdata = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static struct usbhs_omap_board_data cm_t3517_ehci_pdata __initdata = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = HSUSB1_RESET_GPIO, @@ -192,7 +192,7 @@ static int cm_t3517_init_usbh(void) msleep(1); } - usb_ehci_init(&cm_t3517_ehci_pdata); + usbhs_init(&cm_t3517_ehci_pdata); return 0; } diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 9a2a31e..bc0141b 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -620,11 +620,11 @@ static struct omap_musb_board_data musb_board_data = { .power = 100, }; -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, @@ -803,7 +803,7 @@ static void __init devkit8000_init(void) devkit8000_ads7846_init(); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); devkit8000_flash_init(); /* Ensure SDRC pins are mux'd for self-refresh */ diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 3be85a1..f9f5344 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -627,10 +627,10 @@ static struct omap_musb_board_data musb_board_data = { .power = 100, }; -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET, @@ -699,7 +699,7 @@ static void __init igep2_init(void) platform_add_devices(igep2_devices, ARRAY_SIZE(igep2_devices)); omap_serial_init(); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); igep2_flash_init(); igep2_leds_init(); diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c index 4dc62a9..579fc2d 100644 --- a/arch/arm/mach-omap2/board-igep0030.c +++ b/arch/arm/mach-omap2/board-igep0030.c @@ -408,10 +408,10 @@ static void __init igep3_wifi_bt_init(void) void __init igep3_wifi_bt_init(void) {} #endif -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, @@ -435,7 +435,7 @@ static void __init igep3_init(void) platform_add_devices(igep3_devices, ARRAY_SIZE(igep3_devices)); omap_serial_init(); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); igep3_flash_init(); igep3_leds_init(); diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 46d814a..f0963b6 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -586,11 +586,11 @@ static void __init omap3beagle_flash_init(void) } } -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, @@ -625,7 +625,7 @@ static void __init omap3_beagle_init(void) gpio_direction_output(170, true); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); omap3beagle_flash_init(); /* Ensure SDRC pins are mux'd for self-refresh */ diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 323c380..38a2d91 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -638,11 +638,11 @@ static struct platform_device *omap3_evm_devices[] __initdata = { &omap3_evm_dss_device, }; -static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = { +static struct usbhs_omap_board_data usbhs_bdata __initdata = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, /* PHY reset GPIO will be runtime programmed based on EVM version */ @@ -700,7 +700,7 @@ static void __init omap3_evm_init(void) /* setup EHCI phy reset config */ omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP); - ehci_pdata.reset_gpio_port[1] = 21; + usbhs_bdata.reset_gpio_port[1] = 21; /* EVM REV >= E can supply 500mA with EXTVBUS programming */ musb_board_data.power = 500; @@ -708,10 +708,10 @@ static void __init omap3_evm_init(void) } else { /* setup EHCI phy reset on MDC */ omap_mux_init_gpio(135, OMAP_PIN_OUTPUT); - ehci_pdata.reset_gpio_port[1] = 135; + usbhs_bdata.reset_gpio_port[1] = 135; } usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); ads7846_dev_init(); omap3evm_init_smsc911x(); omap3_evm_display_init(); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 0b34bed..aa05f2e 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -681,11 +681,11 @@ static struct platform_device *omap3pandora_devices[] __initdata = { &pandora_vwlan_device, }; -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = 16, @@ -716,7 +716,7 @@ static void __init omap3pandora_init(void) spi_register_board_info(omap3pandora_spi_board_info, ARRAY_SIZE(omap3pandora_spi_board_info)); omap3pandora_ads7846_init(); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); usb_musb_init(&musb_board_data); gpmc_nand_init(&pandora_nand_data); diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 2a2dad4..f6c8778 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -608,10 +608,10 @@ static struct platform_device *omap3_stalker_devices[] __initdata = { &keys_gpio, }; -static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, @@ -649,7 +649,7 @@ static void __init omap3_stalker_init(void) omap_serial_init(); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); ads7846_dev_init(); omap_mux_init_gpio(21, OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index db1f74f..84cfddb 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -468,11 +468,11 @@ static void __init omap3touchbook_flash_init(void) } } -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, @@ -527,7 +527,7 @@ static void __init omap3_touchbook_init(void) ARRAY_SIZE(omap3_ads7846_spi_board_info)); omap3_ads7846_init(); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); omap3touchbook_flash_init(); /* Ensure SDRC pins are mux'd for self-refresh */ diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index e944025..ed61c1f 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -83,10 +83,10 @@ static void __init omap4_panda_init_irq(void) gic_init_irq(); } -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = false, .reset_gpio_port[0] = -EINVAL, .reset_gpio_port[1] = -EINVAL, @@ -128,7 +128,7 @@ static void __init omap4_ehci_init(void) gpio_set_value(GPIO_HUB_NRESET, 0); gpio_set_value(GPIO_HUB_NRESET, 1); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); /* enable power to hub */ gpio_set_value(GPIO_HUB_POWER, 1); @@ -153,6 +153,7 @@ static struct twl4030_usb_data omap4_usbphy_data = { .phy_exit = omap4430_phy_exit, .phy_power = omap4430_phy_power, .phy_set_clock = omap4430_phy_set_clk, + .phy_suspend = omap4430_phy_suspend, }; static struct omap2_hsmmc_info mmc[] = { diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index cb26e5d..08770cc 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -423,10 +423,10 @@ static struct platform_device *overo_devices[] __initdata = { &overo_lcd_device, }; -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, @@ -454,7 +454,7 @@ static void __init overo_init(void) omap_serial_init(); overo_flash_init(); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); overo_ads7846_init(); overo_init_smsc911x(); diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index e26754c..1dd195a 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -106,10 +106,10 @@ static struct mtd_partition zoom_nand_partitions[] = { }, }; -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, .reset_gpio_port[1] = ZOOM3_EHCI_RESET_GPIO, @@ -123,7 +123,7 @@ static void __init omap_zoom_init(void) } else if (machine_is_omap_zoom3()) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); } board_nand_init(zoom_nand_partitions, diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 403a4a1..fbb1e30 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3286,7 +3286,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("ehci-omap.0", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("usbhs-omap.0", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK("omap-mcbsp.1", "prcm_fck", &core_96m_fck, CK_3XXX), CLK("omap-mcbsp.5", "prcm_fck", &core_96m_fck, CK_3XXX), CLK(NULL, "core_96m_fck", &core_96m_fck, CK_3XXX), @@ -3322,7 +3322,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "pka_ick", &pka_ick, CK_34XX | CK_36XX), CLK(NULL, "core_l4_ick", &core_l4_ick, CK_3XXX), CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("ehci-omap.0", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("usbhs-omap.0", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK("mmci-omap-hs.2", "ick", &mmchs3_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "icr_ick", &icr_ick, CK_34XX | CK_36XX), CLK("omap-aes", "ick", &aes2_ick, CK_34XX | CK_36XX), @@ -3368,11 +3368,20 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "cam_ick", &cam_ick, CK_34XX | CK_36XX), CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_34XX | CK_36XX), CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("ehci-omap.0", "hs_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("usbhs-omap.0", "hs_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("ehci-omap.0", "fs_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("usbhs-omap.0", "fs_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("ehci-omap.0", "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("usbhs-omap.0", "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("usbhs-omap.0", "utmi_p1_gfclk", &dummy_ck, CK_3XXX), + CLK("usbhs-omap.0", "utmi_p2_gfclk", &dummy_ck, CK_3XXX), + CLK("usbhs-omap.0", "xclk60mhsp1_ck", &dummy_ck, CK_3XXX), + CLK("usbhs-omap.0", "xclk60mhsp2_ck", &dummy_ck, CK_3XXX), + CLK("usbhs-omap.0", "usb_host_hs_utmi_p1_clk", &dummy_ck, CK_3XXX), + CLK("usbhs-omap.0", "usb_host_hs_utmi_p2_clk", &dummy_ck, CK_3XXX), + CLK("usbhs-omap.0", "usb_tll_hs_usb_ch0_clk", &dummy_ck, CK_3XXX), + CLK("usbhs-omap.0", "usb_tll_hs_usb_ch1_clk", &dummy_ck, CK_3XXX), + CLK("usbhs-omap.0", "init_60m_fclk", &dummy_ck, CK_3XXX), CLK(NULL, "usim_fck", &usim_fck, CK_3430ES2PLUS | CK_36XX), CLK(NULL, "gpt1_fck", &gpt1_fck, CK_3XXX), CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_3XXX), diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index de9ec8d..46fd3f6 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -3197,7 +3197,7 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "uart3_fck", &uart3_fck, CK_443X), CLK(NULL, "uart4_fck", &uart4_fck, CK_443X), CLK(NULL, "usb_host_fs_fck", &usb_host_fs_fck, CK_443X), - CLK("ehci-omap.0", "fs_fck", &usb_host_fs_fck, CK_443X), + CLK("usbhs-omap.0", "fs_fck", &usb_host_fs_fck, CK_443X), CLK(NULL, "utmi_p1_gfclk", &utmi_p1_gfclk, CK_443X), CLK(NULL, "usb_host_hs_utmi_p1_clk", &usb_host_hs_utmi_p1_clk, CK_443X), CLK(NULL, "utmi_p2_gfclk", &utmi_p2_gfclk, CK_443X), @@ -3209,8 +3209,8 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "usb_host_hs_hsic480m_p2_clk", &usb_host_hs_hsic480m_p2_clk, CK_443X), CLK(NULL, "usb_host_hs_func48mclk", &usb_host_hs_func48mclk, CK_443X), CLK(NULL, "usb_host_hs_fck", &usb_host_hs_fck, CK_443X), - CLK("ehci-omap.0", "hs_fck", &usb_host_hs_fck, CK_443X), - CLK("ehci-omap.0", "usbhost_ick", &dummy_ck, CK_443X), + CLK("usbhs-omap.0", "hs_fck", &usb_host_hs_fck, CK_443X), + CLK("usbhs-omap.0", "usbhost_ick", &dummy_ck, CK_443X), CLK(NULL, "otg_60m_gfclk", &otg_60m_gfclk, CK_443X), CLK(NULL, "usb_otg_hs_xclk", &usb_otg_hs_xclk, CK_443X), CLK("musb-omap2430", "ick", &usb_otg_hs_ick, CK_443X), @@ -3219,8 +3219,8 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "usb_tll_hs_usb_ch0_clk", &usb_tll_hs_usb_ch0_clk, CK_443X), CLK(NULL, "usb_tll_hs_usb_ch1_clk", &usb_tll_hs_usb_ch1_clk, CK_443X), CLK(NULL, "usb_tll_hs_ick", &usb_tll_hs_ick, CK_443X), - CLK("ehci-omap.0", "usbtll_ick", &usb_tll_hs_ick, CK_443X), - CLK("ehci-omap.0", "usbtll_fck", &dummy_ck, CK_443X), + CLK("usbhs-omap.0", "usbtll_ick", &usb_tll_hs_ick, CK_443X), + CLK("usbhs-omap.0", "usbtll_fck", &dummy_ck, CK_443X), CLK(NULL, "usim_ck", &usim_ck, CK_443X), CLK(NULL, "usim_fclk", &usim_fclk, CK_443X), CLK(NULL, "usim_fck", &usim_fck, CK_443X), diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index 745252c..ebe33df 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -43,6 +43,7 @@ static struct clk *phyclk, *clk48m, *clk32k; static void __iomem *ctrl_base; +static int usbotghs_control; int omap4430_phy_init(struct device *dev) { @@ -103,13 +104,6 @@ int omap4430_phy_set_clk(struct device *dev, int on) int omap4430_phy_power(struct device *dev, int ID, int on) { if (on) { - /* enabled the clocks */ - omap4430_phy_set_clk(dev, 1); - /* power on the phy */ - if (__raw_readl(ctrl_base + CONTROL_DEV_CONF) & PHY_PD) { - __raw_writel(~PHY_PD, ctrl_base + CONTROL_DEV_CONF); - mdelay(200); - } if (ID) /* enable VBUS valid, IDDIG groung */ __raw_writel(AVALID | VBUSVALID, ctrl_base + @@ -125,10 +119,31 @@ int omap4430_phy_power(struct device *dev, int ID, int on) /* Enable session END and IDIG to high impedence. */ __raw_writel(SESSEND | IDDIG, ctrl_base + USBOTGHS_CONTROL); + } + return 0; +} + +int omap4430_phy_suspend(struct device *dev, int suspend) +{ + if (suspend) { /* Disable the clocks */ omap4430_phy_set_clk(dev, 0); /* Power down the phy */ __raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF); + + /* save the context */ + usbotghs_control = __raw_readl(ctrl_base + USBOTGHS_CONTROL); + } else { + /* Enable the internel phy clcoks */ + omap4430_phy_set_clk(dev, 1); + /* power on the phy */ + if (__raw_readl(ctrl_base + CONTROL_DEV_CONF) & PHY_PD) { + __raw_writel(~PHY_PD, ctrl_base + CONTROL_DEV_CONF); + mdelay(200); + } + + /* restore the context */ + __raw_writel(usbotghs_control, ctrl_base + USBOTGHS_CONTROL); } return 0; diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-host.c index 25eeada..89ae298 100644 --- a/arch/arm/mach-omap2/usb-ehci.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -1,14 +1,15 @@ /* - * linux/arch/arm/mach-omap2/usb-ehci.c + * usb-host.c - OMAP USB Host * * This file will contain the board specific details for the - * Synopsys EHCI host controller on OMAP3430 + * Synopsys EHCI/OHCI host controller on OMAP3430 and onwards * - * Copyright (C) 2007 Texas Instruments + * Copyright (C) 2007-2011 Texas Instruments * Author: Vikram Pandita <vikram.pandita@ti.com> + * Author: Keshava Munegowda <keshava_mgowda@ti.com> * * Generalization by: - * Felipe Balbi <felipe.balbi@nokia.com> + * Felipe Balbi <balbi@ti.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -19,7 +20,7 @@ #include <linux/errno.h> #include <linux/delay.h> #include <linux/platform_device.h> -#include <linux/clk.h> +#include <linux/slab.h> #include <linux/dma-mapping.h> #include <asm/io.h> @@ -30,44 +31,56 @@ #include "mux.h" -#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE) +#ifdef CONFIG_MFD_OMAP_USB_HOST -static struct resource ehci_resources[] = { +#define OMAP_USBHS_DEVICE "usbhs-omap" + +static struct resource usbhs_resources[] = { + { + .name = "uhh", + .flags = IORESOURCE_MEM, + }, { + .name = "tll", .flags = IORESOURCE_MEM, }, { + .name = "ehci", .flags = IORESOURCE_MEM, }, { + .name = "ehci-irq", + .flags = IORESOURCE_IRQ, + }, + { + .name = "ohci", .flags = IORESOURCE_MEM, }, - { /* general IRQ */ - .flags = IORESOURCE_IRQ, + { + .name = "ohci-irq", + .flags = IORESOURCE_IRQ, } }; -static u64 ehci_dmamask = ~(u32)0; -static struct platform_device ehci_device = { - .name = "ehci-omap", - .id = 0, - .dev = { - .dma_mask = &ehci_dmamask, - .coherent_dma_mask = 0xffffffff, - .platform_data = NULL, - }, - .num_resources = ARRAY_SIZE(ehci_resources), - .resource = ehci_resources, +static struct platform_device usbhs_device = { + .name = OMAP_USBHS_DEVICE, + .id = 0, + .num_resources = ARRAY_SIZE(usbhs_resources), + .resource = usbhs_resources, }; +static struct usbhs_omap_platform_data usbhs_data; +static struct ehci_hcd_omap_platform_data ehci_data; +static struct ohci_hcd_omap_platform_data ohci_data; + /* MUX settings for EHCI pins */ /* * setup_ehci_io_mux - initialize IO pad mux for USBHOST */ -static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) +static void setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { - case EHCI_HCD_OMAP_MODE_PHY: + case OMAP_EHCI_PORT_MODE_PHY: omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT); omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT); omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN); @@ -81,7 +94,7 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN); omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_TLL: + case OMAP_EHCI_PORT_MODE_TLL: omap_mux_init_signal("hsusb1_tll_stp", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hsusb1_tll_clk", @@ -107,14 +120,14 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("hsusb1_tll_data7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_UNKNOWN: + case OMAP_USBHS_PORT_MODE_UNUSED: /* FALLTHROUGH */ default: break; } switch (port_mode[1]) { - case EHCI_HCD_OMAP_MODE_PHY: + case OMAP_EHCI_PORT_MODE_PHY: omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT); omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT); omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN); @@ -136,7 +149,7 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("hsusb2_data7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_TLL: + case OMAP_EHCI_PORT_MODE_TLL: omap_mux_init_signal("hsusb2_tll_stp", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hsusb2_tll_clk", @@ -162,17 +175,17 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("hsusb2_tll_data7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_UNKNOWN: + case OMAP_USBHS_PORT_MODE_UNUSED: /* FALLTHROUGH */ default: break; } switch (port_mode[2]) { - case EHCI_HCD_OMAP_MODE_PHY: + case OMAP_EHCI_PORT_MODE_PHY: printk(KERN_WARNING "Port3 can't be used in PHY mode\n"); break; - case EHCI_HCD_OMAP_MODE_TLL: + case OMAP_EHCI_PORT_MODE_TLL: omap_mux_init_signal("hsusb3_tll_stp", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hsusb3_tll_clk", @@ -198,7 +211,7 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("hsusb3_tll_data7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_UNKNOWN: + case OMAP_USBHS_PORT_MODE_UNUSED: /* FALLTHROUGH */ default: break; @@ -207,10 +220,10 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) return; } -static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) +static void setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { - case EHCI_HCD_OMAP_MODE_PHY: + case OMAP_EHCI_PORT_MODE_PHY: omap_mux_init_signal("usbb1_ulpiphy_stp", OMAP_PIN_OUTPUT); omap_mux_init_signal("usbb1_ulpiphy_clk", @@ -236,7 +249,7 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("usbb1_ulpiphy_dat7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_TLL: + case OMAP_EHCI_PORT_MODE_TLL: omap_mux_init_signal("usbb1_ulpitll_stp", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("usbb1_ulpitll_clk", @@ -262,12 +275,12 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("usbb1_ulpitll_dat7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_UNKNOWN: + case OMAP_USBHS_PORT_MODE_UNUSED: default: break; } switch (port_mode[1]) { - case EHCI_HCD_OMAP_MODE_PHY: + case OMAP_EHCI_PORT_MODE_PHY: omap_mux_init_signal("usbb2_ulpiphy_stp", OMAP_PIN_OUTPUT); omap_mux_init_signal("usbb2_ulpiphy_clk", @@ -293,7 +306,7 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("usbb2_ulpiphy_dat7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_TLL: + case OMAP_EHCI_PORT_MODE_TLL: omap_mux_init_signal("usbb2_ulpitll_stp", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("usbb2_ulpitll_clk", @@ -319,90 +332,13 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("usbb2_ulpitll_dat7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_UNKNOWN: + case OMAP_USBHS_PORT_MODE_UNUSED: default: break; } } -void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata) -{ - platform_device_add_data(&ehci_device, pdata, sizeof(*pdata)); - - /* Setup Pin IO MUX for EHCI */ - if (cpu_is_omap34xx()) { - ehci_resources[0].start = OMAP34XX_EHCI_BASE; - ehci_resources[0].end = OMAP34XX_EHCI_BASE + SZ_1K - 1; - ehci_resources[1].start = OMAP34XX_UHH_CONFIG_BASE; - ehci_resources[1].end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1; - ehci_resources[2].start = OMAP34XX_USBTLL_BASE; - ehci_resources[2].end = OMAP34XX_USBTLL_BASE + SZ_4K - 1; - ehci_resources[3].start = INT_34XX_EHCI_IRQ; - setup_ehci_io_mux(pdata->port_mode); - } else if (cpu_is_omap44xx()) { - ehci_resources[0].start = OMAP44XX_HSUSB_EHCI_BASE; - ehci_resources[0].end = OMAP44XX_HSUSB_EHCI_BASE + SZ_1K - 1; - ehci_resources[1].start = OMAP44XX_UHH_CONFIG_BASE; - ehci_resources[1].end = OMAP44XX_UHH_CONFIG_BASE + SZ_2K - 1; - ehci_resources[2].start = OMAP44XX_USBTLL_BASE; - ehci_resources[2].end = OMAP44XX_USBTLL_BASE + SZ_4K - 1; - ehci_resources[3].start = OMAP44XX_IRQ_EHCI; - setup_4430ehci_io_mux(pdata->port_mode); - } - - if (platform_device_register(&ehci_device) < 0) { - printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n"); - return; - } -} - -#else - -void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata) - -{ -} - -#endif /* CONFIG_USB_EHCI_HCD */ - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - -static struct resource ohci_resources[] = { - { - .start = OMAP34XX_OHCI_BASE, - .end = OMAP34XX_OHCI_BASE + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP34XX_UHH_CONFIG_BASE, - .end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP34XX_USBTLL_BASE, - .end = OMAP34XX_USBTLL_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - { /* general IRQ */ - .start = INT_34XX_OHCI_IRQ, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 ohci_dmamask = DMA_BIT_MASK(32); - -static struct platform_device ohci_device = { - .name = "ohci-omap3", - .id = 0, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(ohci_resources), - .resource = ohci_resources, -}; - -static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode) +static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: @@ -430,7 +366,7 @@ static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode) omap_mux_init_signal("mm1_txdat", OMAP_PIN_INPUT_PULLDOWN); break; - case OMAP_OHCI_PORT_MODE_UNUSED: + case OMAP_USBHS_PORT_MODE_UNUSED: /* FALLTHROUGH */ default: break; @@ -461,7 +397,7 @@ static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode) omap_mux_init_signal("mm2_txdat", OMAP_PIN_INPUT_PULLDOWN); break; - case OMAP_OHCI_PORT_MODE_UNUSED: + case OMAP_USBHS_PORT_MODE_UNUSED: /* FALLTHROUGH */ default: break; @@ -492,31 +428,147 @@ static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode) omap_mux_init_signal("mm3_txdat", OMAP_PIN_INPUT_PULLDOWN); break; - case OMAP_OHCI_PORT_MODE_UNUSED: + case OMAP_USBHS_PORT_MODE_UNUSED: /* FALLTHROUGH */ default: break; } } -void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata) +static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) { - platform_device_add_data(&ohci_device, pdata, sizeof(*pdata)); + switch (port_mode[0]) { + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: + omap_mux_init_signal("usbb1_mm_rxdp", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb1_mm_rxdm", + OMAP_PIN_INPUT_PULLDOWN); - /* Setup Pin IO MUX for OHCI */ - if (cpu_is_omap34xx()) + case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: + omap_mux_init_signal("usbb1_mm_rxrcv", + OMAP_PIN_INPUT_PULLDOWN); + + case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: + omap_mux_init_signal("usbb1_mm_txen", + OMAP_PIN_INPUT_PULLDOWN); + + + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: + omap_mux_init_signal("usbb1_mm_txdat", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb1_mm_txse0", + OMAP_PIN_INPUT_PULLDOWN); + break; + + case OMAP_USBHS_PORT_MODE_UNUSED: + default: + break; + } + + switch (port_mode[1]) { + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: + omap_mux_init_signal("usbb2_mm_rxdp", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb2_mm_rxdm", + OMAP_PIN_INPUT_PULLDOWN); + + case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: + omap_mux_init_signal("usbb2_mm_rxrcv", + OMAP_PIN_INPUT_PULLDOWN); + + case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: + omap_mux_init_signal("usbb2_mm_txen", + OMAP_PIN_INPUT_PULLDOWN); + + + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: + omap_mux_init_signal("usbb2_mm_txdat", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb2_mm_txse0", + OMAP_PIN_INPUT_PULLDOWN); + break; + + case OMAP_USBHS_PORT_MODE_UNUSED: + default: + break; + } +} + +void __init usbhs_init(const struct usbhs_omap_board_data *pdata) +{ + int i; + + for (i = 0; i < OMAP3_HS_USB_PORTS; i++) { + usbhs_data.port_mode[i] = pdata->port_mode[i]; + ohci_data.port_mode[i] = pdata->port_mode[i]; + ehci_data.port_mode[i] = pdata->port_mode[i]; + ehci_data.reset_gpio_port[i] = pdata->reset_gpio_port[i]; + ehci_data.regulator[i] = pdata->regulator[i]; + } + ehci_data.phy_reset = pdata->phy_reset; + ohci_data.es2_compatibility = pdata->es2_compatibility; + usbhs_data.ehci_data = &ehci_data; + usbhs_data.ohci_data = &ohci_data; + + if (cpu_is_omap34xx()) { + usbhs_resources[0].start = OMAP34XX_UHH_CONFIG_BASE; + usbhs_resources[0].end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1; + usbhs_resources[1].start = OMAP34XX_USBTLL_BASE; + usbhs_resources[1].end = OMAP34XX_USBTLL_BASE + SZ_4K - 1; + usbhs_resources[2].start = OMAP34XX_EHCI_BASE; + usbhs_resources[2].end = OMAP34XX_EHCI_BASE + SZ_1K - 1; + usbhs_resources[3].start = INT_34XX_EHCI_IRQ; + usbhs_resources[4].start = OMAP34XX_OHCI_BASE; + usbhs_resources[4].end = OMAP34XX_OHCI_BASE + SZ_1K - 1; + usbhs_resources[5].start = INT_34XX_OHCI_IRQ; + setup_ehci_io_mux(pdata->port_mode); setup_ohci_io_mux(pdata->port_mode); + } else if (cpu_is_omap44xx()) { + usbhs_resources[0].start = OMAP44XX_UHH_CONFIG_BASE; + usbhs_resources[0].end = OMAP44XX_UHH_CONFIG_BASE + SZ_1K - 1; + usbhs_resources[1].start = OMAP44XX_USBTLL_BASE; + usbhs_resources[1].end = OMAP44XX_USBTLL_BASE + SZ_4K - 1; + usbhs_resources[2].start = OMAP44XX_HSUSB_EHCI_BASE; + usbhs_resources[2].end = OMAP44XX_HSUSB_EHCI_BASE + SZ_1K - 1; + usbhs_resources[3].start = OMAP44XX_IRQ_EHCI; + usbhs_resources[4].start = OMAP44XX_HSUSB_OHCI_BASE; + usbhs_resources[4].end = OMAP44XX_HSUSB_OHCI_BASE + SZ_1K - 1; + usbhs_resources[5].start = OMAP44XX_IRQ_OHCI; + setup_4430ehci_io_mux(pdata->port_mode); + setup_4430ohci_io_mux(pdata->port_mode); + } - if (platform_device_register(&ohci_device) < 0) { - pr_err("Unable to register FS-USB (OHCI) device\n"); - return; + if (platform_device_add_data(&usbhs_device, + &usbhs_data, sizeof(usbhs_data)) < 0) { + printk(KERN_ERR "USBHS platform_device_add_data failed\n"); + goto init_end; } + + if (platform_device_register(&usbhs_device) < 0) + printk(KERN_ERR "USBHS platform_device_register failed\n"); + +init_end: + return; } #else -void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata) +void __init usbhs_init(const struct usbhs_omap_board_data *pdata) { } -#endif /* CONFIG_USB_OHCI_HCD */ +#endif + + diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 5298949..241fc94 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -214,6 +214,10 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data) if (platform_device_register(&musb_device) < 0) printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n"); + + if (cpu_is_omap44xx()) + omap4430_phy_init(dev); + } #else diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 1a81fe1..1e93f17 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -162,29 +162,10 @@ struct gpio_chip h1940_latch_gpiochip = { .get = h1940_gpiolib_latch_get, }; -static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd) -{ - printk(KERN_DEBUG "udc: pullup(%d)\n",cmd); - - switch (cmd) - { - case S3C2410_UDC_P_ENABLE : - gpio_set_value(H1940_LATCH_USB_DP, 1); - break; - case S3C2410_UDC_P_DISABLE : - gpio_set_value(H1940_LATCH_USB_DP, 0); - break; - case S3C2410_UDC_P_RESET : - break; - default: - break; - } -} - static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = { - .udc_command = h1940_udc_pullup, .vbus_pin = S3C2410_GPG(5), .vbus_pin_inverted = 1, + .pullup_pin = H1940_LATCH_USB_DP, }; static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = { @@ -475,9 +456,6 @@ static void __init h1940_init(void) gpio_direction_output(H1940_LATCH_LCD_P4, 0); gpio_direction_output(H1940_LATCH_MAX1698_nSHUTDOWN, 0); - gpio_request(H1940_LATCH_USB_DP, "USB pullup"); - gpio_direction_output(H1940_LATCH_USB_DP, 0); - gpio_request(H1940_LATCH_SD_POWER, "SD power"); gpio_direction_output(H1940_LATCH_SD_POWER, 0); diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 271b9aa..66f4444 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -84,26 +84,10 @@ static struct s3c2410_uartcfg n30_uartcfgs[] = { }, }; -static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd) -{ - switch (cmd) { - case S3C2410_UDC_P_ENABLE : - gpio_set_value(S3C2410_GPB(3), 1); - break; - case S3C2410_UDC_P_DISABLE : - gpio_set_value(S3C2410_GPB(3), 0); - break; - case S3C2410_UDC_P_RESET : - break; - default: - break; - } -} - static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = { - .udc_command = n30_udc_pullup, .vbus_pin = S3C2410_GPG(1), .vbus_pin_inverted = 0, + .pullup_pin = S3C2410_GPB(3), }; static struct gpio_keys_button n30_buttons[] = { @@ -596,9 +580,6 @@ static void __init n30_init(void) platform_add_devices(n35_devices, ARRAY_SIZE(n35_devices)); } - - WARN_ON(gpio_request(S3C2410_GPB(3), "udc pup")); - gpio_direction_output(S3C2410_GPB(3), 0); } MACHINE_START(N30, "Acer-N30") diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c index 8e5758b..834cfb6 100644 --- a/arch/arm/mach-s3c2412/mach-smdk2413.c +++ b/arch/arm/mach-s3c2412/mach-smdk2413.c @@ -78,28 +78,9 @@ static struct s3c2410_uartcfg smdk2413_uartcfgs[] __initdata = { } }; -static void smdk2413_udc_pullup(enum s3c2410_udc_cmd_e cmd) -{ - printk(KERN_DEBUG "udc: pullup(%d)\n",cmd); - - switch (cmd) - { - case S3C2410_UDC_P_ENABLE : - gpio_set_value(S3C2410_GPF(2), 1); - break; - case S3C2410_UDC_P_DISABLE : - gpio_set_value(S3C2410_GPF(2), 0); - break; - case S3C2410_UDC_P_RESET : - break; - default: - break; - } -} - static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = { - .udc_command = smdk2413_udc_pullup, + .pullup_pin = S3C2410_GPF(2), }; @@ -133,9 +114,6 @@ static void __init smdk2413_machine_init(void) { /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ - WARN_ON(gpio_request(S3C2410_GPF(2), "udc pull")); - gpio_direction_output(S3C2410_GPF(2), 0); - s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | S3C2410_MISCCR_USBSUSPND0 | S3C2410_MISCCR_USBSUSPND1, 0x0); diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c index 9f2c14e..37405d9 100644 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ b/arch/arm/mach-s3c2440/mach-gta02.c @@ -455,28 +455,10 @@ static struct s3c2410_platform_nand __initdata gta02_nand_info = { }; -static void gta02_udc_command(enum s3c2410_udc_cmd_e cmd) -{ - switch (cmd) { - case S3C2410_UDC_P_ENABLE: - pr_debug("%s S3C2410_UDC_P_ENABLE\n", __func__); - gpio_direction_output(GTA02_GPIO_USB_PULLUP, 1); - break; - case S3C2410_UDC_P_DISABLE: - pr_debug("%s S3C2410_UDC_P_DISABLE\n", __func__); - gpio_direction_output(GTA02_GPIO_USB_PULLUP, 0); - break; - case S3C2410_UDC_P_RESET: - pr_debug("%s S3C2410_UDC_P_RESET\n", __func__); - /* FIXME: Do something here. */ - } -} - /* Get PMU to set USB current limit accordingly. */ -static struct s3c2410_udc_mach_info gta02_udc_cfg = { +static struct s3c2410_udc_mach_info gta02_udc_cfg __initdata = { .vbus_draw = gta02_udc_vbus_draw, - .udc_command = gta02_udc_command, - + .pullup_pin = GTA02_GPIO_USB_PULLUP, }; /* USB */ diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index f62bb4c..d80f129 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -97,26 +97,8 @@ static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = { /* USB device UDC support */ -static void mini2440_udc_pullup(enum s3c2410_udc_cmd_e cmd) -{ - pr_debug("udc: pullup(%d)\n", cmd); - - switch (cmd) { - case S3C2410_UDC_P_ENABLE : - gpio_set_value(S3C2410_GPC(5), 1); - break; - case S3C2410_UDC_P_DISABLE : - gpio_set_value(S3C2410_GPC(5), 0); - break; - case S3C2410_UDC_P_RESET : - break; - default: - break; - } -} - static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = { - .udc_command = mini2440_udc_pullup, + .pullup_pin = S3C2410_GPC(5), }; @@ -644,10 +626,6 @@ static void __init mini2440_init(void) s3c2410_gpio_setpin(S3C2410_GPB(1), 0); s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT); - /* Make sure the D+ pullup pin is output */ - WARN_ON(gpio_request(S3C2410_GPC(5), "udc pup")); - gpio_direction_output(S3C2410_GPC(5), 0); - /* mark the key as input, without pullups (there is one on the board) */ for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) { s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP); diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c index eab6ae5..86bbc23 100644 --- a/arch/arm/mach-s3c2440/mach-rx1950.c +++ b/arch/arm/mach-s3c2440/mach-rx1950.c @@ -566,26 +566,10 @@ static struct s3c2410_platform_nand rx1950_nand_info = { .sets = rx1950_nand_sets, }; -static void rx1950_udc_pullup(enum s3c2410_udc_cmd_e cmd) -{ - switch (cmd) { - case S3C2410_UDC_P_ENABLE: - gpio_direction_output(S3C2410_GPJ(5), 1); - break; - case S3C2410_UDC_P_DISABLE: - gpio_direction_output(S3C2410_GPJ(5), 0); - break; - case S3C2410_UDC_P_RESET: - break; - default: - break; - } -} - static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = { - .udc_command = rx1950_udc_pullup, .vbus_pin = S3C2410_GPG(5), .vbus_pin_inverted = 1, + .pullup_pin = S3C2410_GPJ(5), }; static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = { @@ -750,9 +734,6 @@ static void __init rx1950_init_machine(void) S3C2410_MISCCR_USBSUSPND0 | S3C2410_MISCCR_USBSUSPND1, 0x0); - WARN_ON(gpio_request(S3C2410_GPJ(5), "UDC pullup")); - gpio_direction_output(S3C2410_GPJ(5), 0); - /* mmc power is disabled by default */ WARN_ON(gpio_request(S3C2410_GPJ(1), "MMC power")); gpio_direction_output(S3C2410_GPJ(1), 0); diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index b94e52d..622a9ec 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -10,6 +10,9 @@ config ARCH_TEGRA_2x_SOC select CPU_V7 select ARM_GIC select ARCH_REQUIRE_GPIOLIB + select USB_ARCH_HAS_EHCI if USB_SUPPORT + select USB_ULPI if USB_SUPPORT + select USB_ULPI_VIEWPORT if USB_SUPPORT help Support for NVIDIA Tegra AP20 and T20 processors, based on the ARM CortexA9MP CPU and the ARM PL310 L2 cache controller diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 9bf39fa..9f7a7e1 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_TEGRA_SYSTEM_DMA) += dma.o obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o obj-$(CONFIG_TEGRA_PCI) += pcie.o +obj-$(CONFIG_USB_SUPPORT) += usb_phy.o obj-${CONFIG_MACH_HARMONY} += board-harmony.o obj-${CONFIG_MACH_HARMONY} += board-harmony-pinmux.o diff --git a/arch/arm/mach-tegra/include/mach/usb_phy.h b/arch/arm/mach-tegra/include/mach/usb_phy.h new file mode 100644 index 0000000..d4b8f9e --- /dev/null +++ b/arch/arm/mach-tegra/include/mach/usb_phy.h @@ -0,0 +1,86 @@ +/* + * arch/arm/mach-tegra/include/mach/usb_phy.h + * + * Copyright (C) 2010 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __MACH_USB_PHY_H +#define __MACH_USB_PHY_H + +#include <linux/clk.h> +#include <linux/usb/otg.h> + +struct tegra_utmip_config { + u8 hssync_start_delay; + u8 elastic_limit; + u8 idle_wait_delay; + u8 term_range_adj; + u8 xcvr_setup; + u8 xcvr_lsfslew; + u8 xcvr_lsrslew; +}; + +struct tegra_ulpi_config { + int reset_gpio; + const char *clk; +}; + +enum tegra_usb_phy_port_speed { + TEGRA_USB_PHY_PORT_SPEED_FULL = 0, + TEGRA_USB_PHY_PORT_SPEED_LOW, + TEGRA_USB_PHY_PORT_SPEED_HIGH, +}; + +enum tegra_usb_phy_mode { + TEGRA_USB_PHY_MODE_DEVICE, + TEGRA_USB_PHY_MODE_HOST, +}; + +struct tegra_xtal_freq; + +struct tegra_usb_phy { + int instance; + const struct tegra_xtal_freq *freq; + void __iomem *regs; + void __iomem *pad_regs; + struct clk *clk; + struct clk *pll_u; + struct clk *pad_clk; + enum tegra_usb_phy_mode mode; + void *config; + struct otg_transceiver *ulpi; +}; + +struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs, + void *config, enum tegra_usb_phy_mode phy_mode); + +int tegra_usb_phy_power_on(struct tegra_usb_phy *phy); + +void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy); + +void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy); + +void tegra_usb_phy_power_off(struct tegra_usb_phy *phy); + +void tegra_usb_phy_preresume(struct tegra_usb_phy *phy); + +void tegra_usb_phy_postresume(struct tegra_usb_phy *phy); + +void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy, + enum tegra_usb_phy_port_speed port_speed); + +void tegra_ehci_phy_restore_end(struct tegra_usb_phy *phy); + +void tegra_usb_phy_close(struct tegra_usb_phy *phy); + +#endif /* __MACH_USB_PHY_H */ diff --git a/arch/arm/mach-tegra/usb_phy.c b/arch/arm/mach-tegra/usb_phy.c new file mode 100644 index 0000000..88081bb --- /dev/null +++ b/arch/arm/mach-tegra/usb_phy.c @@ -0,0 +1,795 @@ +/* + * arch/arm/mach-tegra/usb_phy.c + * + * Copyright (C) 2010 Google, Inc. + * + * Author: + * Erik Gilling <konkers@google.com> + * Benoit Goby <benoit@android.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/resource.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> +#include <asm/mach-types.h> +#include <mach/usb_phy.h> +#include <mach/iomap.h> + +#define ULPI_VIEWPORT 0x170 + +#define USB_PORTSC1 0x184 +#define USB_PORTSC1_PTS(x) (((x) & 0x3) << 30) +#define USB_PORTSC1_PSPD(x) (((x) & 0x3) << 26) +#define USB_PORTSC1_PHCD (1 << 23) +#define USB_PORTSC1_WKOC (1 << 22) +#define USB_PORTSC1_WKDS (1 << 21) +#define USB_PORTSC1_WKCN (1 << 20) +#define USB_PORTSC1_PTC(x) (((x) & 0xf) << 16) +#define USB_PORTSC1_PP (1 << 12) +#define USB_PORTSC1_SUSP (1 << 7) +#define USB_PORTSC1_PE (1 << 2) +#define USB_PORTSC1_CCS (1 << 0) + +#define USB_SUSP_CTRL 0x400 +#define USB_WAKE_ON_CNNT_EN_DEV (1 << 3) +#define USB_WAKE_ON_DISCON_EN_DEV (1 << 4) +#define USB_SUSP_CLR (1 << 5) +#define USB_PHY_CLK_VALID (1 << 7) +#define UTMIP_RESET (1 << 11) +#define UHSIC_RESET (1 << 11) +#define UTMIP_PHY_ENABLE (1 << 12) +#define ULPI_PHY_ENABLE (1 << 13) +#define USB_SUSP_SET (1 << 14) +#define USB_WAKEUP_DEBOUNCE_COUNT(x) (((x) & 0x7) << 16) + +#define USB1_LEGACY_CTRL 0x410 +#define USB1_NO_LEGACY_MODE (1 << 0) +#define USB1_VBUS_SENSE_CTL_MASK (3 << 1) +#define USB1_VBUS_SENSE_CTL_VBUS_WAKEUP (0 << 1) +#define USB1_VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP \ + (1 << 1) +#define USB1_VBUS_SENSE_CTL_AB_SESS_VLD (2 << 1) +#define USB1_VBUS_SENSE_CTL_A_SESS_VLD (3 << 1) + +#define ULPI_TIMING_CTRL_0 0x424 +#define ULPI_OUTPUT_PINMUX_BYP (1 << 10) +#define ULPI_CLKOUT_PINMUX_BYP (1 << 11) + +#define ULPI_TIMING_CTRL_1 0x428 +#define ULPI_DATA_TRIMMER_LOAD (1 << 0) +#define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1) +#define ULPI_STPDIRNXT_TRIMMER_LOAD (1 << 16) +#define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17) +#define ULPI_DIR_TRIMMER_LOAD (1 << 24) +#define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25) + +#define UTMIP_PLL_CFG1 0x804 +#define UTMIP_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0) +#define UTMIP_PLLU_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27) + +#define UTMIP_XCVR_CFG0 0x808 +#define UTMIP_XCVR_SETUP(x) (((x) & 0xf) << 0) +#define UTMIP_XCVR_LSRSLEW(x) (((x) & 0x3) << 8) +#define UTMIP_XCVR_LSFSLEW(x) (((x) & 0x3) << 10) +#define UTMIP_FORCE_PD_POWERDOWN (1 << 14) +#define UTMIP_FORCE_PD2_POWERDOWN (1 << 16) +#define UTMIP_FORCE_PDZI_POWERDOWN (1 << 18) +#define UTMIP_XCVR_HSSLEW_MSB(x) (((x) & 0x7f) << 25) + +#define UTMIP_BIAS_CFG0 0x80c +#define UTMIP_OTGPD (1 << 11) +#define UTMIP_BIASPD (1 << 10) + +#define UTMIP_HSRX_CFG0 0x810 +#define UTMIP_ELASTIC_LIMIT(x) (((x) & 0x1f) << 10) +#define UTMIP_IDLE_WAIT(x) (((x) & 0x1f) << 15) + +#define UTMIP_HSRX_CFG1 0x814 +#define UTMIP_HS_SYNC_START_DLY(x) (((x) & 0x1f) << 1) + +#define UTMIP_TX_CFG0 0x820 +#define UTMIP_FS_PREABMLE_J (1 << 19) +#define UTMIP_HS_DISCON_DISABLE (1 << 8) + +#define UTMIP_MISC_CFG0 0x824 +#define UTMIP_DPDM_OBSERVE (1 << 26) +#define UTMIP_DPDM_OBSERVE_SEL(x) (((x) & 0xf) << 27) +#define UTMIP_DPDM_OBSERVE_SEL_FS_J UTMIP_DPDM_OBSERVE_SEL(0xf) +#define UTMIP_DPDM_OBSERVE_SEL_FS_K UTMIP_DPDM_OBSERVE_SEL(0xe) +#define UTMIP_DPDM_OBSERVE_SEL_FS_SE1 UTMIP_DPDM_OBSERVE_SEL(0xd) +#define UTMIP_DPDM_OBSERVE_SEL_FS_SE0 UTMIP_DPDM_OBSERVE_SEL(0xc) +#define UTMIP_SUSPEND_EXIT_ON_EDGE (1 << 22) + +#define UTMIP_MISC_CFG1 0x828 +#define UTMIP_PLL_ACTIVE_DLY_COUNT(x) (((x) & 0x1f) << 18) +#define UTMIP_PLLU_STABLE_COUNT(x) (((x) & 0xfff) << 6) + +#define UTMIP_DEBOUNCE_CFG0 0x82c +#define UTMIP_BIAS_DEBOUNCE_A(x) (((x) & 0xffff) << 0) + +#define UTMIP_BAT_CHRG_CFG0 0x830 +#define UTMIP_PD_CHRG (1 << 0) + +#define UTMIP_SPARE_CFG0 0x834 +#define FUSE_SETUP_SEL (1 << 3) + +#define UTMIP_XCVR_CFG1 0x838 +#define UTMIP_FORCE_PDDISC_POWERDOWN (1 << 0) +#define UTMIP_FORCE_PDCHRP_POWERDOWN (1 << 2) +#define UTMIP_FORCE_PDDR_POWERDOWN (1 << 4) +#define UTMIP_XCVR_TERM_RANGE_ADJ(x) (((x) & 0xf) << 18) + +#define UTMIP_BIAS_CFG1 0x83c +#define UTMIP_BIAS_PDTRK_COUNT(x) (((x) & 0x1f) << 3) + +static DEFINE_SPINLOCK(utmip_pad_lock); +static int utmip_pad_count; + +struct tegra_xtal_freq { + int freq; + u8 enable_delay; + u8 stable_count; + u8 active_delay; + u8 xtal_freq_count; + u16 debounce; +}; + +static const struct tegra_xtal_freq tegra_freq_table[] = { + { + .freq = 12000000, + .enable_delay = 0x02, + .stable_count = 0x2F, + .active_delay = 0x04, + .xtal_freq_count = 0x76, + .debounce = 0x7530, + }, + { + .freq = 13000000, + .enable_delay = 0x02, + .stable_count = 0x33, + .active_delay = 0x05, + .xtal_freq_count = 0x7F, + .debounce = 0x7EF4, + }, + { + .freq = 19200000, + .enable_delay = 0x03, + .stable_count = 0x4B, + .active_delay = 0x06, + .xtal_freq_count = 0xBB, + .debounce = 0xBB80, + }, + { + .freq = 26000000, + .enable_delay = 0x04, + .stable_count = 0x66, + .active_delay = 0x09, + .xtal_freq_count = 0xFE, + .debounce = 0xFDE8, + }, +}; + +static struct tegra_utmip_config utmip_default[] = { + [0] = { + .hssync_start_delay = 9, + .idle_wait_delay = 17, + .elastic_limit = 16, + .term_range_adj = 6, + .xcvr_setup = 9, + .xcvr_lsfslew = 1, + .xcvr_lsrslew = 1, + }, + [2] = { + .hssync_start_delay = 9, + .idle_wait_delay = 17, + .elastic_limit = 16, + .term_range_adj = 6, + .xcvr_setup = 9, + .xcvr_lsfslew = 2, + .xcvr_lsrslew = 2, + }, +}; + +static inline bool phy_is_ulpi(struct tegra_usb_phy *phy) +{ + return (phy->instance == 1); +} + +static int utmip_pad_open(struct tegra_usb_phy *phy) +{ + phy->pad_clk = clk_get_sys("utmip-pad", NULL); + if (IS_ERR(phy->pad_clk)) { + pr_err("%s: can't get utmip pad clock\n", __func__); + return PTR_ERR(phy->pad_clk); + } + + if (phy->instance == 0) { + phy->pad_regs = phy->regs; + } else { + phy->pad_regs = ioremap(TEGRA_USB_BASE, TEGRA_USB_SIZE); + if (!phy->pad_regs) { + pr_err("%s: can't remap usb registers\n", __func__); + clk_put(phy->pad_clk); + return -ENOMEM; + } + } + return 0; +} + +static void utmip_pad_close(struct tegra_usb_phy *phy) +{ + if (phy->instance != 0) + iounmap(phy->pad_regs); + clk_put(phy->pad_clk); +} + +static void utmip_pad_power_on(struct tegra_usb_phy *phy) +{ + unsigned long val, flags; + void __iomem *base = phy->pad_regs; + + clk_enable(phy->pad_clk); + + spin_lock_irqsave(&utmip_pad_lock, flags); + + if (utmip_pad_count++ == 0) { + val = readl(base + UTMIP_BIAS_CFG0); + val &= ~(UTMIP_OTGPD | UTMIP_BIASPD); + writel(val, base + UTMIP_BIAS_CFG0); + } + + spin_unlock_irqrestore(&utmip_pad_lock, flags); + + clk_disable(phy->pad_clk); +} + +static int utmip_pad_power_off(struct tegra_usb_phy *phy) +{ + unsigned long val, flags; + void __iomem *base = phy->pad_regs; + + if (!utmip_pad_count) { + pr_err("%s: utmip pad already powered off\n", __func__); + return -EINVAL; + } + + clk_enable(phy->pad_clk); + + spin_lock_irqsave(&utmip_pad_lock, flags); + + if (--utmip_pad_count == 0) { + val = readl(base + UTMIP_BIAS_CFG0); + val |= UTMIP_OTGPD | UTMIP_BIASPD; + writel(val, base + UTMIP_BIAS_CFG0); + } + + spin_unlock_irqrestore(&utmip_pad_lock, flags); + + clk_disable(phy->pad_clk); + + return 0; +} + +static int utmi_wait_register(void __iomem *reg, u32 mask, u32 result) +{ + unsigned long timeout = 2000; + do { + if ((readl(reg) & mask) == result) + return 0; + udelay(1); + timeout--; + } while (timeout); + return -1; +} + +static void utmi_phy_clk_disable(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + + if (phy->instance == 0) { + val = readl(base + USB_SUSP_CTRL); + val |= USB_SUSP_SET; + writel(val, base + USB_SUSP_CTRL); + + udelay(10); + + val = readl(base + USB_SUSP_CTRL); + val &= ~USB_SUSP_SET; + writel(val, base + USB_SUSP_CTRL); + } + + if (phy->instance == 2) { + val = readl(base + USB_PORTSC1); + val |= USB_PORTSC1_PHCD; + writel(val, base + USB_PORTSC1); + } + + if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) < 0) + pr_err("%s: timeout waiting for phy to stabilize\n", __func__); +} + +static void utmi_phy_clk_enable(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + + if (phy->instance == 0) { + val = readl(base + USB_SUSP_CTRL); + val |= USB_SUSP_CLR; + writel(val, base + USB_SUSP_CTRL); + + udelay(10); + + val = readl(base + USB_SUSP_CTRL); + val &= ~USB_SUSP_CLR; + writel(val, base + USB_SUSP_CTRL); + } + + if (phy->instance == 2) { + val = readl(base + USB_PORTSC1); + val &= ~USB_PORTSC1_PHCD; + writel(val, base + USB_PORTSC1); + } + + if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, + USB_PHY_CLK_VALID)) + pr_err("%s: timeout waiting for phy to stabilize\n", __func__); +} + +static int utmi_phy_power_on(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + struct tegra_utmip_config *config = phy->config; + + val = readl(base + USB_SUSP_CTRL); + val |= UTMIP_RESET; + writel(val, base + USB_SUSP_CTRL); + + if (phy->instance == 0) { + val = readl(base + USB1_LEGACY_CTRL); + val |= USB1_NO_LEGACY_MODE; + writel(val, base + USB1_LEGACY_CTRL); + } + + val = readl(base + UTMIP_TX_CFG0); + val &= ~UTMIP_FS_PREABMLE_J; + writel(val, base + UTMIP_TX_CFG0); + + val = readl(base + UTMIP_HSRX_CFG0); + val &= ~(UTMIP_IDLE_WAIT(~0) | UTMIP_ELASTIC_LIMIT(~0)); + val |= UTMIP_IDLE_WAIT(config->idle_wait_delay); + val |= UTMIP_ELASTIC_LIMIT(config->elastic_limit); + writel(val, base + UTMIP_HSRX_CFG0); + + val = readl(base + UTMIP_HSRX_CFG1); + val &= ~UTMIP_HS_SYNC_START_DLY(~0); + val |= UTMIP_HS_SYNC_START_DLY(config->hssync_start_delay); + writel(val, base + UTMIP_HSRX_CFG1); + + val = readl(base + UTMIP_DEBOUNCE_CFG0); + val &= ~UTMIP_BIAS_DEBOUNCE_A(~0); + val |= UTMIP_BIAS_DEBOUNCE_A(phy->freq->debounce); + writel(val, base + UTMIP_DEBOUNCE_CFG0); + + val = readl(base + UTMIP_MISC_CFG0); + val &= ~UTMIP_SUSPEND_EXIT_ON_EDGE; + writel(val, base + UTMIP_MISC_CFG0); + + val = readl(base + UTMIP_MISC_CFG1); + val &= ~(UTMIP_PLL_ACTIVE_DLY_COUNT(~0) | UTMIP_PLLU_STABLE_COUNT(~0)); + val |= UTMIP_PLL_ACTIVE_DLY_COUNT(phy->freq->active_delay) | + UTMIP_PLLU_STABLE_COUNT(phy->freq->stable_count); + writel(val, base + UTMIP_MISC_CFG1); + + val = readl(base + UTMIP_PLL_CFG1); + val &= ~(UTMIP_XTAL_FREQ_COUNT(~0) | UTMIP_PLLU_ENABLE_DLY_COUNT(~0)); + val |= UTMIP_XTAL_FREQ_COUNT(phy->freq->xtal_freq_count) | + UTMIP_PLLU_ENABLE_DLY_COUNT(phy->freq->enable_delay); + writel(val, base + UTMIP_PLL_CFG1); + + if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) { + val = readl(base + USB_SUSP_CTRL); + val &= ~(USB_WAKE_ON_CNNT_EN_DEV | USB_WAKE_ON_DISCON_EN_DEV); + writel(val, base + USB_SUSP_CTRL); + } + + utmip_pad_power_on(phy); + + val = readl(base + UTMIP_XCVR_CFG0); + val &= ~(UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN | + UTMIP_FORCE_PDZI_POWERDOWN | UTMIP_XCVR_SETUP(~0) | + UTMIP_XCVR_LSFSLEW(~0) | UTMIP_XCVR_LSRSLEW(~0) | + UTMIP_XCVR_HSSLEW_MSB(~0)); + val |= UTMIP_XCVR_SETUP(config->xcvr_setup); + val |= UTMIP_XCVR_LSFSLEW(config->xcvr_lsfslew); + val |= UTMIP_XCVR_LSRSLEW(config->xcvr_lsrslew); + writel(val, base + UTMIP_XCVR_CFG0); + + val = readl(base + UTMIP_XCVR_CFG1); + val &= ~(UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN | + UTMIP_FORCE_PDDR_POWERDOWN | UTMIP_XCVR_TERM_RANGE_ADJ(~0)); + val |= UTMIP_XCVR_TERM_RANGE_ADJ(config->term_range_adj); + writel(val, base + UTMIP_XCVR_CFG1); + + val = readl(base + UTMIP_BAT_CHRG_CFG0); + val &= ~UTMIP_PD_CHRG; + writel(val, base + UTMIP_BAT_CHRG_CFG0); + + val = readl(base + UTMIP_BIAS_CFG1); + val &= ~UTMIP_BIAS_PDTRK_COUNT(~0); + val |= UTMIP_BIAS_PDTRK_COUNT(0x5); + writel(val, base + UTMIP_BIAS_CFG1); + + if (phy->instance == 0) { + val = readl(base + UTMIP_SPARE_CFG0); + if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) + val &= ~FUSE_SETUP_SEL; + else + val |= FUSE_SETUP_SEL; + writel(val, base + UTMIP_SPARE_CFG0); + } + + if (phy->instance == 2) { + val = readl(base + USB_SUSP_CTRL); + val |= UTMIP_PHY_ENABLE; + writel(val, base + USB_SUSP_CTRL); + } + + val = readl(base + USB_SUSP_CTRL); + val &= ~UTMIP_RESET; + writel(val, base + USB_SUSP_CTRL); + + if (phy->instance == 0) { + val = readl(base + USB1_LEGACY_CTRL); + val &= ~USB1_VBUS_SENSE_CTL_MASK; + val |= USB1_VBUS_SENSE_CTL_A_SESS_VLD; + writel(val, base + USB1_LEGACY_CTRL); + + val = readl(base + USB_SUSP_CTRL); + val &= ~USB_SUSP_SET; + writel(val, base + USB_SUSP_CTRL); + } + + utmi_phy_clk_enable(phy); + + if (phy->instance == 2) { + val = readl(base + USB_PORTSC1); + val &= ~USB_PORTSC1_PTS(~0); + writel(val, base + USB_PORTSC1); + } + + return 0; +} + +static void utmi_phy_power_off(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + + utmi_phy_clk_disable(phy); + + if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) { + val = readl(base + USB_SUSP_CTRL); + val &= ~USB_WAKEUP_DEBOUNCE_COUNT(~0); + val |= USB_WAKE_ON_CNNT_EN_DEV | USB_WAKEUP_DEBOUNCE_COUNT(5); + writel(val, base + USB_SUSP_CTRL); + } + + val = readl(base + USB_SUSP_CTRL); + val |= UTMIP_RESET; + writel(val, base + USB_SUSP_CTRL); + + val = readl(base + UTMIP_BAT_CHRG_CFG0); + val |= UTMIP_PD_CHRG; + writel(val, base + UTMIP_BAT_CHRG_CFG0); + + val = readl(base + UTMIP_XCVR_CFG0); + val |= UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN | + UTMIP_FORCE_PDZI_POWERDOWN; + writel(val, base + UTMIP_XCVR_CFG0); + + val = readl(base + UTMIP_XCVR_CFG1); + val |= UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN | + UTMIP_FORCE_PDDR_POWERDOWN; + writel(val, base + UTMIP_XCVR_CFG1); + + utmip_pad_power_off(phy); +} + +static void utmi_phy_preresume(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + + val = readl(base + UTMIP_TX_CFG0); + val |= UTMIP_HS_DISCON_DISABLE; + writel(val, base + UTMIP_TX_CFG0); +} + +static void utmi_phy_postresume(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + + val = readl(base + UTMIP_TX_CFG0); + val &= ~UTMIP_HS_DISCON_DISABLE; + writel(val, base + UTMIP_TX_CFG0); +} + +static void utmi_phy_restore_start(struct tegra_usb_phy *phy, + enum tegra_usb_phy_port_speed port_speed) +{ + unsigned long val; + void __iomem *base = phy->regs; + + val = readl(base + UTMIP_MISC_CFG0); + val &= ~UTMIP_DPDM_OBSERVE_SEL(~0); + if (port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW) + val |= UTMIP_DPDM_OBSERVE_SEL_FS_K; + else + val |= UTMIP_DPDM_OBSERVE_SEL_FS_J; + writel(val, base + UTMIP_MISC_CFG0); + udelay(1); + + val = readl(base + UTMIP_MISC_CFG0); + val |= UTMIP_DPDM_OBSERVE; + writel(val, base + UTMIP_MISC_CFG0); + udelay(10); +} + +static void utmi_phy_restore_end(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + + val = readl(base + UTMIP_MISC_CFG0); + val &= ~UTMIP_DPDM_OBSERVE; + writel(val, base + UTMIP_MISC_CFG0); + udelay(10); +} + +static int ulpi_phy_power_on(struct tegra_usb_phy *phy) +{ + int ret; + unsigned long val; + void __iomem *base = phy->regs; + struct tegra_ulpi_config *config = phy->config; + + gpio_direction_output(config->reset_gpio, 0); + msleep(5); + gpio_direction_output(config->reset_gpio, 1); + + clk_enable(phy->clk); + msleep(1); + + val = readl(base + USB_SUSP_CTRL); + val |= UHSIC_RESET; + writel(val, base + USB_SUSP_CTRL); + + val = readl(base + ULPI_TIMING_CTRL_0); + val |= ULPI_OUTPUT_PINMUX_BYP | ULPI_CLKOUT_PINMUX_BYP; + writel(val, base + ULPI_TIMING_CTRL_0); + + val = readl(base + USB_SUSP_CTRL); + val |= ULPI_PHY_ENABLE; + writel(val, base + USB_SUSP_CTRL); + + val = 0; + writel(val, base + ULPI_TIMING_CTRL_1); + + val |= ULPI_DATA_TRIMMER_SEL(4); + val |= ULPI_STPDIRNXT_TRIMMER_SEL(4); + val |= ULPI_DIR_TRIMMER_SEL(4); + writel(val, base + ULPI_TIMING_CTRL_1); + udelay(10); + + val |= ULPI_DATA_TRIMMER_LOAD; + val |= ULPI_STPDIRNXT_TRIMMER_LOAD; + val |= ULPI_DIR_TRIMMER_LOAD; + writel(val, base + ULPI_TIMING_CTRL_1); + + /* Fix VbusInvalid due to floating VBUS */ + ret = otg_io_write(phy->ulpi, 0x40, 0x08); + if (ret) { + pr_err("%s: ulpi write failed\n", __func__); + return ret; + } + + ret = otg_io_write(phy->ulpi, 0x80, 0x0B); + if (ret) { + pr_err("%s: ulpi write failed\n", __func__); + return ret; + } + + val = readl(base + USB_PORTSC1); + val |= USB_PORTSC1_WKOC | USB_PORTSC1_WKDS | USB_PORTSC1_WKCN; + writel(val, base + USB_PORTSC1); + + val = readl(base + USB_SUSP_CTRL); + val |= USB_SUSP_CLR; + writel(val, base + USB_SUSP_CTRL); + udelay(100); + + val = readl(base + USB_SUSP_CTRL); + val &= ~USB_SUSP_CLR; + writel(val, base + USB_SUSP_CTRL); + + return 0; +} + +static void ulpi_phy_power_off(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + struct tegra_ulpi_config *config = phy->config; + + /* Clear WKCN/WKDS/WKOC wake-on events that can cause the USB + * Controller to immediately bring the ULPI PHY out of low power + */ + val = readl(base + USB_PORTSC1); + val &= ~(USB_PORTSC1_WKOC | USB_PORTSC1_WKDS | USB_PORTSC1_WKCN); + writel(val, base + USB_PORTSC1); + + gpio_direction_output(config->reset_gpio, 0); + clk_disable(phy->clk); +} + +struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs, + void *config, enum tegra_usb_phy_mode phy_mode) +{ + struct tegra_usb_phy *phy; + struct tegra_ulpi_config *ulpi_config; + unsigned long parent_rate; + int i; + int err; + + phy = kmalloc(sizeof(struct tegra_usb_phy), GFP_KERNEL); + if (!phy) + return ERR_PTR(-ENOMEM); + + phy->instance = instance; + phy->regs = regs; + phy->config = config; + phy->mode = phy_mode; + + if (!phy->config) { + if (phy_is_ulpi(phy)) { + pr_err("%s: ulpi phy configuration missing", __func__); + err = -EINVAL; + goto err0; + } else { + phy->config = &utmip_default[instance]; + } + } + + phy->pll_u = clk_get_sys(NULL, "pll_u"); + if (IS_ERR(phy->pll_u)) { + pr_err("Can't get pll_u clock\n"); + err = PTR_ERR(phy->pll_u); + goto err0; + } + clk_enable(phy->pll_u); + + parent_rate = clk_get_rate(clk_get_parent(phy->pll_u)); + for (i = 0; i < ARRAY_SIZE(tegra_freq_table); i++) { + if (tegra_freq_table[i].freq == parent_rate) { + phy->freq = &tegra_freq_table[i]; + break; + } + } + if (!phy->freq) { + pr_err("invalid pll_u parent rate %ld\n", parent_rate); + err = -EINVAL; + goto err1; + } + + if (phy_is_ulpi(phy)) { + ulpi_config = config; + phy->clk = clk_get_sys(NULL, ulpi_config->clk); + if (IS_ERR(phy->clk)) { + pr_err("%s: can't get ulpi clock\n", __func__); + err = -ENXIO; + goto err1; + } + tegra_gpio_enable(ulpi_config->reset_gpio); + gpio_request(ulpi_config->reset_gpio, "ulpi_phy_reset_b"); + gpio_direction_output(ulpi_config->reset_gpio, 0); + phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0); + phy->ulpi->io_priv = regs + ULPI_VIEWPORT; + } else { + err = utmip_pad_open(phy); + if (err < 0) + goto err1; + } + + return phy; + +err1: + clk_disable(phy->pll_u); + clk_put(phy->pll_u); +err0: + kfree(phy); + return ERR_PTR(err); +} + +int tegra_usb_phy_power_on(struct tegra_usb_phy *phy) +{ + if (phy_is_ulpi(phy)) + return ulpi_phy_power_on(phy); + else + return utmi_phy_power_on(phy); +} + +void tegra_usb_phy_power_off(struct tegra_usb_phy *phy) +{ + if (phy_is_ulpi(phy)) + ulpi_phy_power_off(phy); + else + utmi_phy_power_off(phy); +} + +void tegra_usb_phy_preresume(struct tegra_usb_phy *phy) +{ + if (!phy_is_ulpi(phy)) + utmi_phy_preresume(phy); +} + +void tegra_usb_phy_postresume(struct tegra_usb_phy *phy) +{ + if (!phy_is_ulpi(phy)) + utmi_phy_postresume(phy); +} + +void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy, + enum tegra_usb_phy_port_speed port_speed) +{ + if (!phy_is_ulpi(phy)) + utmi_phy_restore_start(phy, port_speed); +} + +void tegra_ehci_phy_restore_end(struct tegra_usb_phy *phy) +{ + if (!phy_is_ulpi(phy)) + utmi_phy_restore_end(phy); +} + +void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy) +{ + if (!phy_is_ulpi(phy)) + utmi_phy_clk_disable(phy); +} + +void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy) +{ + if (!phy_is_ulpi(phy)) + utmi_phy_clk_enable(phy); +} + +void tegra_usb_phy_close(struct tegra_usb_phy *phy) +{ + if (phy_is_ulpi(phy)) + clk_put(phy->clk); + else + utmip_pad_close(phy); + clk_disable(phy->pll_u); + clk_put(phy->pll_u); + kfree(phy); +} diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 450a332..fe449f1 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -7,15 +7,12 @@ #include <plat/board.h> #define OMAP3_HS_USB_PORTS 3 -enum ehci_hcd_omap_mode { - EHCI_HCD_OMAP_MODE_UNKNOWN, - EHCI_HCD_OMAP_MODE_PHY, - EHCI_HCD_OMAP_MODE_TLL, - EHCI_HCD_OMAP_MODE_HSIC, -}; -enum ohci_omap3_port_mode { - OMAP_OHCI_PORT_MODE_UNUSED, +enum usbhs_omap_port_mode { + OMAP_USBHS_PORT_MODE_UNUSED, + OMAP_EHCI_PORT_MODE_PHY, + OMAP_EHCI_PORT_MODE_TLL, + OMAP_EHCI_PORT_MODE_HSIC, OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0, OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM, OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0, @@ -25,24 +22,45 @@ enum ohci_omap3_port_mode { OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0, OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM, OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0, - OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM, + OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM }; -struct ehci_hcd_omap_platform_data { - enum ehci_hcd_omap_mode port_mode[OMAP3_HS_USB_PORTS]; - unsigned phy_reset:1; +struct usbhs_omap_board_data { + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; /* have to be valid if phy_reset is true and portx is in phy mode */ int reset_gpio_port[OMAP3_HS_USB_PORTS]; + + /* Set this to true for ES2.x silicon */ + unsigned es2_compatibility:1; + + unsigned phy_reset:1; + + /* + * Regulators for USB PHYs. + * Each PHY can have a separate regulator. + */ + struct regulator *regulator[OMAP3_HS_USB_PORTS]; }; -struct ohci_hcd_omap_platform_data { - enum ohci_omap3_port_mode port_mode[OMAP3_HS_USB_PORTS]; +struct ehci_hcd_omap_platform_data { + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; + int reset_gpio_port[OMAP3_HS_USB_PORTS]; + struct regulator *regulator[OMAP3_HS_USB_PORTS]; + unsigned phy_reset:1; +}; - /* Set this to true for ES2.x silicon */ +struct ohci_hcd_omap_platform_data { + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; unsigned es2_compatibility:1; }; +struct usbhs_omap_platform_data { + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; + + struct ehci_hcd_omap_platform_data *ehci_data; + struct ohci_hcd_omap_platform_data *ohci_data; +}; /*-------------------------------------------------------------------------*/ #define OMAP1_OTG_BASE 0xfffb0400 @@ -80,18 +98,18 @@ enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI}; extern void usb_musb_init(struct omap_musb_board_data *board_data); -extern void usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata); +extern void usbhs_init(const struct usbhs_omap_board_data *pdata); -extern void usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata); +extern int omap_usbhs_enable(struct device *dev); +extern void omap_usbhs_disable(struct device *dev); extern int omap4430_phy_power(struct device *dev, int ID, int on); extern int omap4430_phy_set_clk(struct device *dev, int on); extern int omap4430_phy_init(struct device *dev); extern int omap4430_phy_exit(struct device *dev); - +extern int omap4430_phy_suspend(struct device *dev, int suspend); #endif - /* * FIXME correct answer depends on hmc_mode, * as does (on omap1) any nonzero value for config->otg port number diff --git a/arch/arm/plat-s3c24xx/include/plat/udc.h b/arch/arm/plat-s3c24xx/include/plat/udc.h index 546bb40..80457c6 100644 --- a/arch/arm/plat-s3c24xx/include/plat/udc.h +++ b/arch/arm/plat-s3c24xx/include/plat/udc.h @@ -27,6 +27,10 @@ enum s3c2410_udc_cmd_e { struct s3c2410_udc_mach_info { void (*udc_command)(enum s3c2410_udc_cmd_e); void (*vbus_draw)(unsigned int ma); + + unsigned int pullup_pin; + unsigned int pullup_pin_inverted; + unsigned int vbus_pin; unsigned char vbus_pin_inverted; }; |