diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/powerpc/boot/dts/mpc5121ads.dts | 55 |
1 files changed, 33 insertions, 22 deletions
diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts index c353dac..d2b2db7 100644 --- a/arch/powerpc/boot/dts/mpc5121ads.dts +++ b/arch/powerpc/boot/dts/mpc5121ads.dts @@ -62,17 +62,12 @@ interrupt-parent = < &ipic >; #address-cells = <1>; #size-cells = <1>; - bank-width = <1>; // ADS has two Hynix 512MB Nand flash chips in a single - // stacked package . + // stacked package. chips = <2>; - nand0@0 { - label = "nand0"; - reg = <0x00000000 0x02000000>; // first 32 MB of chip 0 - }; - nand1@20000000 { - label = "nand1"; - reg = <0x20000000 0x02000000>; // first 32 MB of chip 1 + nand@0 { + label = "nand"; + reg = <0x00000000 0x40000000>; // 512MB + 512MB }; }; @@ -166,6 +161,11 @@ interrupt-parent = < &ipic >; }; + reset@e00 { // Reset module + compatible = "fsl,mpc5121-reset"; + reg = <0xe00 0x100>; + }; + clock@f00 { // Clock control compatible = "fsl,mpc5121-clock"; reg = <0xf00 0x100>; @@ -185,17 +185,15 @@ interrupt-parent = < &ipic >; }; - mscan@1300 { + can@1300 { compatible = "fsl,mpc5121-mscan"; - cell-index = <0>; interrupts = <12 0x8>; interrupt-parent = < &ipic >; reg = <0x1300 0x80>; }; - mscan@1380 { + can@1380 { compatible = "fsl,mpc5121-mscan"; - cell-index = <1>; interrupts = <13 0x8>; interrupt-parent = < &ipic >; reg = <0x1380 0x80>; @@ -205,17 +203,31 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5121-i2c", "fsl-i2c"; - cell-index = <0>; reg = <0x1700 0x20>; interrupts = <9 0x8>; interrupt-parent = < &ipic >; + fsl,preserve-clocking; + + hwmon@4a { + compatible = "adi,ad7414"; + reg = <0x4a>; + }; + + eeprom@50 { + compatible = "at,24c32"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "stm,m41t62"; + reg = <0x68>; + }; }; i2c@1720 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5121-i2c", "fsl-i2c"; - cell-index = <1>; reg = <0x1720 0x20>; interrupts = <10 0x8>; interrupt-parent = < &ipic >; @@ -225,7 +237,6 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5121-i2c", "fsl-i2c"; - cell-index = <2>; reg = <0x1740 0x20>; interrupts = <11 0x8>; interrupt-parent = < &ipic >; @@ -244,7 +255,7 @@ }; display@2100 { - compatible = "fsl,mpc5121-diu", "fsl-diu"; + compatible = "fsl,mpc5121-diu", "fsl,diu"; reg = <0x2100 0x100>; interrupts = <64 0x8>; interrupt-parent = < &ipic >; @@ -277,7 +288,7 @@ // USB1 using external ULPI PHY //usb@3000 { - // compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr"; + // compatible = "fsl,mpc5121-usb2-dr"; // reg = <0x3000 0x1000>; // #address-cells = <1>; // #size-cells = <0>; @@ -285,12 +296,11 @@ // interrupts = <43 0x8>; // dr_mode = "otg"; // phy_type = "ulpi"; - // port1; //}; // USB0 using internal UTMI PHY usb@4000 { - compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr"; + compatible = "fsl,mpc5121-usb2-dr"; reg = <0x4000 0x1000>; #address-cells = <1>; #size-cells = <0>; @@ -298,7 +308,8 @@ interrupts = <44 0x8>; dr_mode = "otg"; phy_type = "utmi_wide"; - port0; + fsl,invert-drvvbus; + fsl,invert-pwr-fault; }; // IO control @@ -365,7 +376,7 @@ }; dma@14000 { - compatible = "fsl,mpc5121-dma2"; + compatible = "fsl,mpc5121-dma"; reg = <0x14000 0x1800>; interrupts = <65 0x8>; interrupt-parent = < &ipic >; |