diff options
Diffstat (limited to 'drivers/pcmcia')
| -rw-r--r-- | drivers/pcmcia/Makefile | 1 | ||||
| -rw-r--r-- | drivers/pcmcia/pxa2xx_sharpsl.c | 31 | ||||
| -rw-r--r-- | drivers/pcmcia/sa1100_generic.c | 7 |
3 files changed, 38 insertions, 1 deletions
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile index 77ecee7..da7a8f2 100644 --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile @@ -59,6 +59,7 @@ sa1111_cs-$(CONFIG_SA1100_JORNADA720) += sa1100_jornada720.o sa1100_cs-y += sa1100_generic.o sa1100_cs-$(CONFIG_SA1100_ASSABET) += sa1100_assabet.o sa1100_cs-$(CONFIG_SA1100_CERF) += sa1100_cerf.o +sa1100_cs-$(CONFIG_SA1100_COLLIE) += pxa2xx_sharpsl.o sa1100_cs-$(CONFIG_SA1100_H3600) += sa1100_h3600.o sa1100_cs-$(CONFIG_SA1100_SHANNON) += sa1100_shannon.o sa1100_cs-$(CONFIG_SA1100_SIMPAD) += sa1100_simpad.o diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c index a1178a6..bd92433 100644 --- a/drivers/pcmcia/pxa2xx_sharpsl.c +++ b/drivers/pcmcia/pxa2xx_sharpsl.c @@ -18,10 +18,15 @@ #include <linux/interrupt.h> #include <linux/device.h> +#include <asm/mach-types.h> #include <asm/hardware.h> #include <asm/irq.h> #include <asm/hardware/scoop.h> -#include <asm/arch/pxa-regs.h> +#ifdef CONFIG_SA1100_COLLIE +#include <asm/arch-sa1100/collie.h> +#else +#include <asm/arch-pxa/pxa-regs.h> +#endif #include "soc_common.h" @@ -38,6 +43,7 @@ static int sharpsl_pcmcia_hw_init(struct soc_pcmcia_socket *skt) { int ret; +#ifndef CONFIG_SA1100_COLLIE /* * Setup default state of GPIO outputs * before we enable them as outputs. @@ -60,6 +66,7 @@ static int sharpsl_pcmcia_hw_init(struct soc_pcmcia_socket *skt) pxa_gpio_mode(GPIO55_nPREG_MD); pxa_gpio_mode(GPIO56_nPWAIT_MD); pxa_gpio_mode(GPIO57_nIOIS16_MD); +#endif /* Register interrupts */ if (scoop_devs[skt->nr].cd_irq >= 0) { @@ -213,12 +220,20 @@ static void sharpsl_pcmcia_socket_init(struct soc_pcmcia_socket *skt) write_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_IMR, 0x00C0); write_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_MCR, 0x0101); scoop_devs[skt->nr].keep_vs = NO_KEEP_VS; + + if (machine_is_collie()) + /* We need to disable SS_OUTPUT_ENA here. */ + write_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_CPR, read_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_CPR) & ~0x0080); } static void sharpsl_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) { /* CF_BUS_OFF */ sharpsl_pcmcia_init_reset(&scoop_devs[skt->nr]); + + if (machine_is_collie()) + /* We need to disable SS_OUTPUT_ENA here. */ + write_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_CPR, read_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_CPR) & ~0x0080); } static struct pcmcia_low_level sharpsl_pcmcia_ops = { @@ -235,6 +250,19 @@ static struct pcmcia_low_level sharpsl_pcmcia_ops = { static struct platform_device *sharpsl_pcmcia_device; +#ifdef CONFIG_SA1100_COLLIE +int __init pcmcia_collie_init(struct device *dev) +{ + int ret = -ENODEV; + + if (machine_is_collie()) + ret = sa11xx_drv_pcmcia_probe(dev, &sharpsl_pcmcia_ops, 0, 1); + + return ret; +} + +#else + static int __init sharpsl_pcmcia_init(void) { int ret; @@ -269,6 +297,7 @@ static void __exit sharpsl_pcmcia_exit(void) fs_initcall(sharpsl_pcmcia_init); module_exit(sharpsl_pcmcia_exit); +#endif MODULE_DESCRIPTION("Sharp SL Series PCMCIA Support"); MODULE_LICENSE("GPL"); diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c index b768fa8..acf60ff 100644 --- a/drivers/pcmcia/sa1100_generic.c +++ b/drivers/pcmcia/sa1100_generic.c @@ -38,8 +38,12 @@ #include <pcmcia/cs.h> #include <pcmcia/ss.h> +#include <asm/hardware/scoop.h> + #include "sa1100_generic.h" +int __init pcmcia_collie_init(struct device *dev); + static int (*sa11x0_pcmcia_hw_init[])(struct device *dev) = { #ifdef CONFIG_SA1100_ASSABET pcmcia_assabet_init, @@ -56,6 +60,9 @@ static int (*sa11x0_pcmcia_hw_init[])(struct device *dev) = { #ifdef CONFIG_SA1100_SIMPAD pcmcia_simpad_init, #endif +#ifdef CONFIG_SA1100_COLLIE + pcmcia_collie_init, +#endif }; static int sa11x0_drv_pcmcia_probe(struct device *dev) |