diff options
Diffstat (limited to 'drivers/rtc')
| -rw-r--r-- | drivers/rtc/Kconfig | 126 | ||||
| -rw-r--r-- | drivers/rtc/Makefile | 4 | ||||
| -rw-r--r-- | drivers/rtc/rtc-at91sam9.c | 520 | ||||
| -rw-r--r-- | drivers/rtc/rtc-bfin.c | 351 | ||||
| -rw-r--r-- | drivers/rtc/rtc-cmos.c | 221 | ||||
| -rw-r--r-- | drivers/rtc/rtc-dev.c | 9 | ||||
| -rw-r--r-- | drivers/rtc/rtc-ds1302.c | 262 | ||||
| -rw-r--r-- | drivers/rtc/rtc-ds1307.c | 27 | ||||
| -rw-r--r-- | drivers/rtc/rtc-ds1511.c | 656 | ||||
| -rw-r--r-- | drivers/rtc/rtc-pcf8583.c | 24 | ||||
| -rw-r--r-- | drivers/rtc/rtc-r9701.c | 178 | ||||
| -rw-r--r-- | drivers/rtc/rtc-s3c.c | 5 | ||||
| -rw-r--r-- | drivers/rtc/rtc-sa1100.c | 16 | ||||
| -rw-r--r-- | drivers/rtc/rtc-sysfs.c | 19 |
14 files changed, 2157 insertions, 261 deletions
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 45e4b96..6402d69 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -20,6 +20,10 @@ menuconfig RTC_CLASS if RTC_CLASS +if GEN_RTC || RTC +comment "Conflicting RTC option has been selected, check GEN_RTC and RTC" +endif + config RTC_HCTOSYS bool "Set system time from RTC on startup and resume" depends on RTC_CLASS = y @@ -49,7 +53,7 @@ config RTC_HCTOSYS_DEVICE If the clock you specify here is not battery backed, it may still be useful to reinitialize system time when resuming from system - sleep states. Do not specify an RTC here unless it stays powered + sleep states. Do not specify an RTC here unless it stays powered during all this system's supported sleep states. config RTC_DEBUG @@ -142,7 +146,7 @@ config RTC_DRV_DS1307 will be called rtc-ds1307. config RTC_DRV_DS1374 - tristate "Maxim/Dallas Semiconductor DS1374 Real Time Clock" + tristate "Dallas/Maxim DS1374" depends on RTC_CLASS && I2C help If you say yes here you get support for Dallas Semiconductor @@ -162,7 +166,7 @@ config RTC_DRV_DS1672 will be called rtc-ds1672. config RTC_DRV_MAX6900 - tristate "Maxim 6900" + tristate "Maxim MAX6900" help If you say yes here you will get support for the Maxim MAX6900 I2C RTC chip. @@ -180,10 +184,10 @@ config RTC_DRV_RS5C372 will be called rtc-rs5c372. config RTC_DRV_ISL1208 - tristate "Intersil 1208" + tristate "Intersil ISL1208" help If you say yes here you get support for the - Intersil 1208 RTC chip. + Intersil ISL1208 RTC chip. This driver can also be built as a module. If so, the module will be called rtc-isl1208. @@ -220,7 +224,7 @@ config RTC_DRV_PCF8583 will be called rtc-pcf8583. config RTC_DRV_M41T80 - tristate "ST M41T80 series RTC" + tristate "ST M41T80/81/82/83/84/85/87" help If you say Y here you will get support for the ST M41T80 RTC chips series. Currently following chips are @@ -252,23 +256,32 @@ comment "SPI RTC drivers" if SPI_MASTER -config RTC_DRV_RS5C348 - tristate "Ricoh RS5C348A/B" +config RTC_DRV_MAX6902 + tristate "Maxim MAX6902" help - If you say yes here you get support for the - Ricoh RS5C348A and RS5C348B RTC chips. + If you say yes here you will get support for the + Maxim MAX6902 SPI RTC chip. This driver can also be built as a module. If so, the module - will be called rtc-rs5c348. + will be called rtc-max6902. -config RTC_DRV_MAX6902 - tristate "Maxim 6902" +config RTC_DRV_R9701 + tristate "Epson RTC-9701JE" help If you say yes here you will get support for the - Maxim MAX6902 SPI RTC chip. + Epson RTC-9701JE SPI RTC chip. This driver can also be built as a module. If so, the module - will be called rtc-max6902. + will be called rtc-r9701. + +config RTC_DRV_RS5C348 + tristate "Ricoh RS5C348A/B" + help + If you say yes here you get support for the + Ricoh RS5C348A and RS5C348B RTC chips. + + This driver can also be built as a module. If so, the module + will be called rtc-rs5c348. endif # SPI_MASTER @@ -302,34 +315,50 @@ config RTC_DRV_DS1216 help If you say yes here you get support for the Dallas DS1216 RTC chips. -config RTC_DRV_DS1553 - tristate "Dallas DS1553" +config RTC_DRV_DS1302 + tristate "Dallas DS1302" + depends on SH_SECUREEDGE5410 + help + If you say yes here you get support for the Dallas DS1302 RTC chips. + +config RTC_DRV_DS1511 + tristate "Dallas DS1511" + depends on RTC_CLASS help If you say yes here you get support for the - Dallas DS1553 timekeeping chip. + Dallas DS1511 timekeeping/watchdog chip. This driver can also be built as a module. If so, the module - will be called rtc-ds1553. + will be called rtc-ds1511. -config RTC_DRV_STK17TA8 - tristate "Simtek STK17TA8" - depends on RTC_CLASS +config RTC_DRV_DS1553 + tristate "Maxim/Dallas DS1553" help If you say yes here you get support for the - Simtek STK17TA8 timekeeping chip. + Maxim/Dallas DS1553 timekeeping chip. This driver can also be built as a module. If so, the module - will be called rtc-stk17ta8. + will be called rtc-ds1553. config RTC_DRV_DS1742 - tristate "Dallas DS1742/1743" + tristate "Maxim/Dallas DS1742/1743" help If you say yes here you get support for the - Dallas DS1742/1743 timekeeping chip. + Maxim/Dallas DS1742/1743 timekeeping chip. This driver can also be built as a module. If so, the module will be called rtc-ds1742. +config RTC_DRV_STK17TA8 + tristate "Simtek STK17TA8" + depends on RTC_CLASS + help + If you say yes here you get support for the + Simtek STK17TA8 timekeeping chip. + + This driver can also be built as a module. If so, the module + will be called rtc-stk17ta8. + config RTC_DRV_M48T86 tristate "ST M48T86/Dallas DS12887" help @@ -440,10 +469,47 @@ config RTC_DRV_AT32AP700X AT32AP700x family processors. config RTC_DRV_AT91RM9200 - tristate "AT91RM9200" - depends on ARCH_AT91RM9200 - help - Driver for the Atmel AT91RM9200's internal RTC (Realtime Clock). + tristate "AT91RM9200 or AT91SAM9RL" + depends on ARCH_AT91RM9200 || ARCH_AT91SAM9RL + help + Driver for the internal RTC (Realtime Clock) module found on + Atmel AT91RM9200's and AT91SAM9RL chips. On SAM9RL chips + this is powered by the backup power supply. + +config RTC_DRV_AT91SAM9 + tristate "AT91SAM9x" + depends on ARCH_AT91 && !(ARCH_AT91RM9200 || ARCH_AT91X40) + help + RTC driver for the Atmel AT91SAM9x internal RTT (Real Time Timer). + These timers are powered by the backup power supply (such as a + small coin cell battery), but do not need to be used as RTCs. + + (On AT91SAM9rl chips you probably want to use the dedicated RTC + module and leave the RTT available for other uses.) + +config RTC_DRV_AT91SAM9_RTT + int + range 0 1 + default 0 + prompt "RTT module Number" if ARCH_AT91SAM9263 + depends on RTC_DRV_AT91SAM9 + help + More than one RTT module is available. You can choose which + one will be used as an RTC. The default of zero is normally + OK to use, though some systems use that for non-RTC purposes. + +config RTC_DRV_AT91SAM9_GPBR + int + range 0 3 if !ARCH_AT91SAM9263 + range 0 15 if ARCH_AT91SAM9263 + default 0 + prompt "Backup Register Number" + depends on RTC_DRV_AT91SAM9 + help + The RTC driver needs to use one of the General Purpose Backup + Registers (GPBRs) as well as the RTT. You can choose which one + will be used. The default of zero is normally OK to use, but + on some systems other software needs to use that register. config RTC_DRV_BFIN tristate "Blackfin On-Chip RTC" diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 465db4d..ec703f3 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -19,11 +19,14 @@ rtc-core-$(CONFIG_RTC_INTF_SYSFS) += rtc-sysfs.o obj-$(CONFIG_RTC_DRV_AT32AP700X)+= rtc-at32ap700x.o obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o +obj-$(CONFIG_RTC_DRV_AT91SAM9) += rtc-at91sam9.o obj-$(CONFIG_RTC_DRV_BFIN) += rtc-bfin.o obj-$(CONFIG_RTC_DRV_CMOS) += rtc-cmos.o obj-$(CONFIG_RTC_DRV_DS1216) += rtc-ds1216.o +obj-$(CONFIG_RTC_DRV_DS1302) += rtc-ds1302.o obj-$(CONFIG_RTC_DRV_DS1307) += rtc-ds1307.o obj-$(CONFIG_RTC_DRV_DS1374) += rtc-ds1374.o +obj-$(CONFIG_RTC_DRV_DS1511) += rtc-ds1511.o obj-$(CONFIG_RTC_DRV_DS1553) += rtc-ds1553.o obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o obj-$(CONFIG_RTC_DRV_DS1742) += rtc-ds1742.o @@ -38,6 +41,7 @@ obj-$(CONFIG_RTC_DRV_OMAP) += rtc-omap.o obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o obj-$(CONFIG_RTC_DRV_PCF8583) += rtc-pcf8583.o obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o +obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o obj-$(CONFIG_RTC_DRV_RS5C372) += rtc-rs5c372.o diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c new file mode 100644 index 0000000..bbf10ec --- /dev/null +++ b/drivers/rtc/rtc-at91sam9.c @@ -0,0 +1,520 @@ +/* + * "RTT as Real Time Clock" driver for AT91SAM9 SoC family + * + * (C) 2007 Michel Benoit + * + * Based on rtc-at91rm9200.c by Rick Bronson + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/time.h> +#include <linux/rtc.h> +#include <linux/interrupt.h> +#include <linux/ioctl.h> + +#include <asm/mach/time.h> +#include <asm/arch/board.h> +#include <asm/arch/at91_rtt.h> + + +/* + * This driver uses two configurable hardware resources that live in the + * AT91SAM9 backup power domain (intended to be powered at all times) + * to implement the Real Time Clock interfaces + * + * - A "Real-time Timer" (RTT) counts up in seconds from a base time. + * We can't assign the counter value (CRTV) ... but we can reset it. + * + * - One of the "General Purpose Backup Registers" (GPBRs) holds the + * base time, normally an offset from the beginning of the POSIX + * epoch (1970-Jan-1 00:00:00 UTC). Some systems also include the + * local timezone's offset. + * + * The RTC's value is the RTT counter plus that offset. The RTC's alarm + * is likewise a base (ALMV) plus that offset. + * + * Not all RTTs will be used as RTCs; some systems have multiple RTTs to + * choose from, or a "real" RTC module. All systems have multiple GPBR + * registers available, likewise usable for more than "RTC" support. + */ + +/* + * We store ALARM_DISABLED in ALMV to record that no alarm is set. + * It's also the reset value for that field. + */ +#define ALARM_DISABLED ((u32)~0) + + +struct sam9_rtc { + void __iomem *rtt; + struct rtc_device *rtcdev; + u32 imr; +}; + +#define rtt_readl(rtc, field) \ + __raw_readl((rtc)->rtt + AT91_RTT_ ## field) +#define rtt_writel(rtc, field, val) \ + __raw_writel((val), (rtc)->rtt + AT91_RTT_ ## field) + +#define gpbr_readl(rtc) \ + at91_sys_read(AT91_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR) +#define gpbr_writel(rtc, val) \ + at91_sys_write(AT91_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR, (val)) + +/* + * Read current time and date in RTC + */ +static int at91_rtc_readtime(struct device *dev, struct rtc_time *tm) +{ + struct sam9_rtc *rtc = dev_get_drvdata(dev); + u32 secs, secs2; + u32 offset; + + /* read current time offset */ + offset = gpbr_readl(rtc); + if (offset == 0) + return -EILSEQ; + + /* reread the counter to help sync the two clock domains */ + secs = rtt_readl(rtc, VR); + secs2 = rtt_readl(rtc, VR); + if (secs != secs2) + secs = rtt_readl(rtc, VR); + + rtc_time_to_tm(offset + secs, tm); + + dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "readtime", + 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday, + tm->tm_hour, tm->tm_min, tm->tm_sec); + + return 0; +} + +/* + * Set current time and date in RTC + */ +static int at91_rtc_settime(struct device *dev, struct rtc_time *tm) +{ + struct sam9_rtc *rtc = dev_get_drvdata(dev); + int err; + u32 offset, alarm, mr; + unsigned long secs; + + dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "settime", + 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday, + tm->tm_hour, tm->tm_min, tm->tm_sec); + + err = rtc_tm_to_time(tm, &secs); + if (err != 0) + return err; + + mr = rtt_readl(rtc, MR); + + /* disable interrupts */ + rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN)); + + /* read current time offset */ + offset = gpbr_readl(rtc); + + /* store the new base time in a battery backup register */ + secs += 1; + gpbr_writel(rtc, secs); + + /* adjust the alarm time for the new base */ + alarm = rtt_readl(rtc, AR); + if (alarm != ALARM_DISABLED) { + if (offset > secs) { + /* time jumped backwards, increase time until alarm */ + alarm += (offset - secs); + } else if ((alarm + offset) > secs) { + /* time jumped forwards, decrease time until alarm */ + alarm -= (secs - offset); + } else { + /* time jumped past the alarm, disable alarm */ + alarm = ALARM_DISABLED; + mr &= ~AT91_RTT_ALMIEN; + } + rtt_writel(rtc, AR, alarm); + } + + /* reset the timer, and re-enable interrupts */ + rtt_writel(rtc, MR, mr | AT91_RTT_RTTRST); + + return 0; +} + +static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct sam9_rtc *rtc = dev_get_drvdata(dev); + struct rtc_time *tm = &alrm->time; + u32 alarm = rtt_readl(rtc, AR); + u32 offset; + + offset = gpbr_readl(rtc); + if (offset == 0) + return -EILSEQ; + + memset(alrm, 0, sizeof(alrm)); + if (alarm != ALARM_DISABLED && offset != 0) { + rtc_time_to_tm(offset + alarm, tm); + + dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "readalarm", + 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday, + tm->tm_hour, tm->tm_min, tm->tm_sec); + + if (rtt_readl(rtc, MR) & AT91_RTT_ALMIEN) + alrm->enabled = 1; + } + + return 0; +} + +static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct sam9_rtc *rtc = dev_get_drvdata(dev); + struct rtc_time *tm = &alrm->time; + unsigned long secs; + u32 offset; + u32 mr; + int err; + + err = rtc_tm_to_time(tm, &secs); + if (err != 0) + return err; + + offset = gpbr_readl(rtc); + if (offset == 0) { + /* time is not set */ + return -EILSEQ; + } + mr = rtt_readl(rtc, MR); + rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN); + + /* alarm in the past? finish and leave disabled */ + if (secs <= offset) { + rtt_writel(rtc, AR, ALARM_DISABLED); + return 0; + } + + /* else set alarm and maybe enable it */ + rtt_writel(rtc, AR, secs - offset); + if (alrm->enabled) + rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN); + + dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "setalarm", + tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_hour, + tm->tm_min, tm->tm_sec); + + return 0; +} + +/* + * Handle commands from user-space + */ +static int at91_rtc_ioctl(struct device *dev, unsigned int cmd, + unsigned long arg) +{ + struct sam9_rtc *rtc = dev_get_drvdata(dev); + int ret = 0; + u32 mr = rtt_readl(rtc, MR); + + dev_dbg(dev, "ioctl: cmd=%08x, arg=%08lx, mr %08x\n", cmd, arg, mr); + + switch (cmd) { + case RTC_AIE_OFF: /* alarm off */ + rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN); + break; + case RTC_AIE_ON: /* alarm on */ + rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN); + break; + case RTC_UIE_OFF: /* update off */ + rtt_writel(rtc, MR, mr & ~AT91_RTT_RTTINCIEN); + break; + case RTC_UIE_ON: /* update on */ + rtt_writel(rtc, MR, mr | AT91_RTT_RTTINCIEN); + break; + default: + ret = -ENOIOCTLCMD; + break; + } + + return ret; +} + +/* + * Provide additional RTC information in /proc/driver/rtc + */ +static int at91_rtc_proc(struct device *dev, struct seq_file *seq) +{ + struct sam9_rtc *rtc = dev_get_drvdata(dev); + u32 mr = mr = rtt_readl(rtc, MR); + + seq_printf(seq, "update_IRQ\t: %s\n", + (mr & AT91_RTT_RTTINCIEN) ? "yes" : "no"); + return 0; +} + +/* + * IRQ handler for the RTC + */ +static irqreturn_t at91_rtc_interrupt(int irq, void *_rtc) +{ + struct sam9_rtc *rtc = _rtc; + u32 sr, mr; + unsigned long events = 0; + + /* Shared interrupt may be for another device. Note: reading + * SR clears it, so we must only read it in this irq handler! + */ + mr = rtt_readl(rtc, MR) & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN); + sr = rtt_readl(rtc, SR) & mr; + if (!sr) + return IRQ_NONE; + + /* alarm status */ + if (sr & AT91_RTT_ALMS) + events |= (RTC_AF | RTC_IRQF); + + /* timer update/increment */ + if (sr & AT91_RTT_RTTINC) + events |= (RTC_UF | RTC_IRQF); + + rtc_update_irq(rtc->rtcdev, 1, events); + + pr_debug("%s: num=%ld, events=0x%02lx\n", __FUNCTION__, + events >> 8, events & 0x000000FF); + + return IRQ_HANDLED; +} + +static const struct rtc_class_ops at91_rtc_ops = { + .ioctl = at91_rtc_ioctl, + .read_time = at91_rtc_readtime, + .set_time = at91_rtc_settime, + .read_alarm = at91_rtc_readalarm, + .set_alarm = at91_rtc_setalarm, + .proc = at91_rtc_proc, +}; + +/* + * Initialize and install RTC driver + */ +static int __init at91_rtc_probe(struct platform_device *pdev) +{ + struct resource *r; + struct sam9_rtc *rtc; + int ret; + u32 mr; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) + return -ENODEV; + + rtc = kzalloc(sizeof *rtc, GFP_KERNEL); + if (!rtc) + return -ENOMEM; + + platform_set_drvdata(pdev, rtc); + rtc->rtt = (void __force __iomem *) (AT91_VA_BASE_SYS - AT91_BASE_SYS); + rtc->rtt += r->start; + + mr = rtt_readl(rtc, MR); + + /* unless RTT is counting at 1 Hz, re-initialize it */ + if ((mr & AT91_RTT_RTPRES) != AT91_SLOW_CLOCK) { + mr = AT91_RTT_RTTRST | (AT91_SLOW_CLOCK & AT91_RTT_RTPRES); + gpbr_writel(rtc, 0); + } + + /* disable all interrupts (same as on shutdown path) */ + mr &= ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN); + rtt_writel(rtc, MR, mr); + + rtc->rtcdev = rtc_device_register(pdev->name, &pdev->dev, + &at91_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc->rtcdev)) { + ret = PTR_ERR(rtc->rtcdev); + goto fail; + } + + /* register irq handler after we know what name we'll use */ + ret = request_irq(AT91_ID_SYS, at91_rtc_interrupt, + IRQF_DISABLED | IRQF_SHARED, + rtc->rtcdev->dev.bus_id, rtc); + if (ret) { + dev_dbg(&pdev->dev, "can't share IRQ %d?\n", AT91_ID_SYS); + rtc_device_unregister(rtc->rtcdev); + goto fail; + } + + /* NOTE: sam9260 rev A silicon has a ROM bug which resets the + * RTT on at least some reboots. If you have that chip, you must + * initialize the time from some external source like a GPS, wall + * clock, discrete RTC, etc + */ + + if (gpbr_readl(rtc) == 0) + dev_warn(&pdev->dev, "%s: SET TIME!\n", + rtc->rtcdev->dev.bus_id); + + return 0; + +fail: + platform_set_drvdata(pdev, NULL); + kfree(rtc); + return ret; +} + +/* + * Disable and remove the RTC driver + */ +static int __exit at91_rtc_remove(struct platform_device *pdev) +{ + struct sam9_rtc *rtc = platform_get_drvdata(pdev); + u32 mr = rtt_readl(rtc, MR); + + /* disable all interrupts */ + rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN)); + free_irq(AT91_ID_SYS, rtc); + + rtc_device_unregister(rtc->rtcdev); + + platform_set_drvdata(pdev, NULL); + kfree(rtc); + return 0; +} + +static void at91_rtc_shutdown(struct platform_device *pdev) +{ + struct sam9_rtc *rtc = platform_get_drvdata(pdev); + u32 mr = rtt_readl(rtc, MR); + + rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN); + rtt_writel(rtc, MR, mr & ~rtc->imr); +} + +#ifdef CONFIG_PM + +/* AT91SAM9 RTC Power management control */ + +static int at91_rtc_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct sam9_rtc *rtc = platform_get_drvdata(pdev); + u32 mr = rtt_readl(rtc, MR); + + /* + * This IRQ is shared with DBGU and other hardware which isn't + * necessarily a wakeup event source. + */ + rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN); + if (rtc->imr) { + if (device_may_wakeup(&pdev->dev) && (mr & AT91_RTT_ALMIEN)) { + enable_irq_wake(AT91_ID_SYS); + /* don't let RTTINC cause wakeups */ + if (mr & AT91_RTT_RTTINCIEN) + rtt_writel(rtc, MR, mr & ~AT91_RTT_RTTINCIEN); + } else + rtt_writel(rtc, MR, mr & ~rtc->imr); + } + + return 0; +} + +static int at91_rtc_resume(struct platform_device *pdev) +{ + struct sam9_rtc *rtc = platform_get_drvdata(pdev); + u32 mr; + + if (rtc->imr) { + if (device_may_wakeup(&pdev->dev)) + disable_irq_wake(AT91_ID_SYS); + mr = rtt_readl(rtc, MR); + rtt_writel(rtc, MR, mr | rtc->imr); + } + + return 0; +} +#else +#define at91_rtc_suspend NULL +#define at91_rtc_resume NULL +#endif + +static struct platform_driver at91_rtc_driver = { + .driver.name = "rtc-at91sam9", + .driver.owner = THIS_MODULE, + .remove = __exit_p(at91_rtc_remove), + .shutdown = at91_rtc_shutdown, + .suspend = at91_rtc_suspend, + .resume = at91_rtc_resume, +}; + +/* Chips can have more than one RTT module, and they can be used for more + * than just RTCs. So we can't just register as "the" RTT driver. + * + * A normal approach in such cases is to create a library to allocate and + * free the modules. Here we just use bus_find_device() as like such a + * library, binding directly ... no runtime "library" footprint is needed. + */ +static int __init at91_rtc_match(struct device *dev, void *v) +{ + struct platform_device *pdev = to_platform_device(dev); + int ret; + + /* continue searching if this isn't the RTT we need */ + if (strcmp("at91_rtt", pdev->name) != 0 + || pdev->id != CONFIG_RTC_DRV_AT91SAM9_RTT) + goto fail; + + /* else we found it ... but fail unless we can bind to the RTC driver */ + if (dev->driver) { + dev_dbg(dev, "busy, can't use as RTC!\n"); + goto fail; + } + dev->driver = &at91_rtc_driver.driver; + if (device_attach(dev) == 0) { + dev_dbg(dev, "can't attach RTC!\n"); + goto fail; + } + ret = at91_rtc_probe(pdev); + if (ret == 0) + return true; + + dev_dbg(dev, "RTC probe err %d!\n", ret); +fail: + return false; +} + +static int __init at91_rtc_init(void) +{ + int status; + struct device *rtc; + + status = platform_driver_register(&at91_rtc_driver); + if (status) + return status; + rtc = bus_find_device(&platform_bus_type, NULL, + NULL, at91_rtc_match); + if (!rtc) + platform_driver_unregister(&at91_rtc_driver); + return rtc ? 0 : -ENODEV; +} +module_init(at91_rtc_init); + +static void __exit at91_rtc_exit(void) +{ + platform_driver_unregister(&at91_rtc_driver); +} +module_exit(at91_rtc_exit); + + +MODULE_AUTHOR("Michel Benoit"); +MODULE_DESCRIPTION("RTC driver for Atmel AT91SAM9x"); +MODULE_LICENSE("GPL"); diff --git a/drivers/rtc/rtc-bfin.c b/drivers/rtc/rtc-bfin.c index 1aa709d..d90ba86 100644 --- a/drivers/rtc/rtc-bfin.c +++ b/drivers/rtc/rtc-bfin.c @@ -1,6 +1,6 @@ /* * Blackfin On-Chip Real Time Clock Driver - * Supports BF53[123]/BF53[467]/BF54[2489] + * Supports BF52[257]/BF53[123]/BF53[467]/BF54[24789] * * Copyright 2004-2007 Analog Devices Inc. * @@ -32,26 +32,25 @@ * writes to clear status registers complete immediately. */ -#include <linux/module.h> -#include <linux/kernel.h> #include <linux/bcd.h> -#include <linux/rtc.h> +#include <linux/completion.h> +#include <linux/delay.h> #include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> #include <linux/platform_device.h> +#include <linux/rtc.h> #include <linux/seq_file.h> -#include <linux/interrupt.h> -#include <linux/spinlock.h> -#include <linux/delay.h> #include <asm/blackfin.h> -#define stamp(fmt, args...) pr_debug("%s:%i: " fmt "\n", __FUNCTION__, __LINE__, ## args) -#define stampit() stamp("here i am") +#define dev_dbg_stamp(dev) dev_dbg(dev, "%s:%i: here i am\n", __func__, __LINE__) struct bfin_rtc { struct rtc_device *rtc_dev; struct rtc_time rtc_alarm; - spinlock_t lock; + u16 rtc_wrote_regs; }; /* Bit values for the ISTAT / ICTL registers */ @@ -72,7 +71,7 @@ struct bfin_rtc { #define SEC_BITS_OFF 0 /* Some helper functions to convert between the common RTC notion of time - * and the internal Blackfin notion that is stored in 32bits. + * and the internal Blackfin notion that is encoded in 32bits. */ static inline u32 rtc_time_to_bfin(unsigned long now) { @@ -97,7 +96,10 @@ static inline void rtc_bfin_to_tm(u32 rtc_bfin, struct rtc_time *tm) rtc_time_to_tm(rtc_bfin_to_time(rtc_bfin), tm); } -/* Wait for the previous write to a RTC register to complete. +/** + * bfin_rtc_sync_pending - make sure pending writes have complete + * + * Wait for the previous write to a RTC register to complete. * Unfortunately, we can't sleep here as that introduces a race condition when * turning on interrupt events. Consider this: * - process sets alarm @@ -112,188 +114,202 @@ static inline void rtc_bfin_to_tm(u32 rtc_bfin, struct rtc_time *tm) * If anyone can point out the obvious solution here, i'm listening :). This * shouldn't be an issue on an SMP or preempt system as this function should * only be called with the rtc lock held. + * + * Other options: + * - disable PREN so the sync happens at 32.768kHZ ... but this changes the + * inc rate for all RTC registers from 1HZ to 32.768kHZ ... + * - use the write complete IRQ */ -static void rtc_bfin_sync_pending(void) +/* +static void bfin_rtc_sync_pending_polled(void) { - stampit(); - while (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_COMPLETE)) { + while (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_COMPLETE)) if (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING)) break; - } bfin_write_RTC_ISTAT(RTC_ISTAT_WRITE_COMPLETE); } +*/ +static DECLARE_COMPLETION(bfin_write_complete); +static void bfin_rtc_sync_pending(struct device *dev) +{ + dev_dbg_stamp(dev); + while (bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING) + wait_for_completion_timeout(&bfin_write_complete, HZ * 5); + dev_dbg_stamp(dev); +} -static void rtc_bfin_reset(struct bfin_rtc *rtc) +/** + * bfin_rtc_reset - set RTC to sane/known state + * + * Initialize the RTC. Enable pre-scaler to scale RTC clock + * to 1Hz and clear interrupt/status registers. + */ +static void bfin_rtc_reset(struct device *dev) { - /* Initialize the RTC. Enable pre-scaler to scale RTC clock - * to 1Hz and clear interrupt/status registers. */ - spin_lock_irq(&rtc->lock); - rtc_bfin_sync_pending(); + struct bfin_rtc *rtc = dev_get_drvdata(dev); + dev_dbg_stamp(dev); + bfin_rtc_sync_pending(dev); bfin_write_RTC_PREN(0x1); - bfin_write_RTC_ICTL(0); + bfin_write_RTC_ICTL(RTC_ISTAT_WRITE_COMPLETE); bfin_write_RTC_SWCNT(0); bfin_write_RTC_ALARM(0); bfin_write_RTC_ISTAT(0xFFFF); - spin_unlock_irq(&rtc->lock); + rtc->rtc_wrote_regs = 0; } +/** + * bfin_rtc_interrupt - handle interrupt from RTC + * + * Since we handle all RTC events here, we have to make sure the requested + * interrupt is enabled (in RTC_ICTL) as the event status register (RTC_ISTAT) + * always gets updated regardless of the interrupt being enabled. So when one + * even we care about (e.g. stopwatch) goes off, we don't want to turn around + * and say that other events have happened as well (e.g. second). We do not + * have to worry about pending writes to the RTC_ICTL register as interrupts + * only fire if they are enabled in the RTC_ICTL register. + */ static irqreturn_t bfin_rtc_interrupt(int irq, void *dev_id) { - struct platform_device *pdev = to_platform_device(dev_id); - struct bfin_rtc *rtc = platform_get_drvdata(pdev); + struct device *dev = dev_id; + struct bfin_rtc *rtc = dev_get_drvdata(dev); unsigned long events = 0; - u16 rtc_istat; - - stampit(); + bool write_complete = false; + u16 rtc_istat, rtc_ictl; - spin_lock_irq(&rtc->lock); + dev_dbg_stamp(dev); rtc_istat = bfin_read_RTC_ISTAT(); + rtc_ictl = bfin_read_RTC_ICTL(); - if (rtc_istat & (RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY)) { - bfin_write_RTC_ISTAT(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY); - events |= RTC_AF | RTC_IRQF; + if (rtc_istat & RTC_ISTAT_WRITE_COMPLETE) { + bfin_write_RTC_ISTAT(RTC_ISTAT_WRITE_COMPLETE); + write_complete = true; + complete(&bfin_write_complete); } - if (rtc_istat & RTC_ISTAT_STOPWATCH) { - bfin_write_RTC_ISTAT(RTC_ISTAT_STOPWATCH); - events |= RTC_PF | RTC_IRQF; - bfin_write_RTC_SWCNT(rtc->rtc_dev->irq_freq); + if (rtc_ictl & (RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY)) { + if (rtc_istat & (RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY)) { + bfin_write_RTC_ISTAT(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY); + events |= RTC_AF | RTC_IRQF; + } } - if (rtc_istat & RTC_ISTAT_SEC) { - bfin_write_RTC_ISTAT(RTC_ISTAT_SEC); - events |= RTC_UF | RTC_IRQF; + if (rtc_ictl & RTC_ISTAT_STOPWATCH) { + if (rtc_istat & RTC_ISTAT_STOPWATCH) { + bfin_write_RTC_ISTAT(RTC_ISTAT_STOPWATCH); + events |= RTC_PF | RTC_IRQF; + bfin_write_RTC_SWCNT(rtc->rtc_dev->irq_freq); + } } - rtc_update_irq(rtc->rtc_dev, 1, events); + if (rtc_ictl & RTC_ISTAT_SEC) { + if (rtc_istat & RTC_ISTAT_SEC) { + bfin_write_RTC_ISTAT(RTC_ISTAT_SEC); + events |= RTC_UF | RTC_IRQF; + } + } - spin_unlock_irq(&rtc->lock); + if (events) + rtc_update_irq(rtc->rtc_dev, 1, events); - return IRQ_HANDLED; + if (write_complete || events) + return IRQ_HANDLED; + else + return IRQ_NONE; } static int bfin_rtc_open(struct device *dev) { - struct bfin_rtc *rtc = dev_get_drvdata(dev); int ret; - stampit(); + dev_dbg_stamp(dev); - ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_DISABLED, "rtc-bfin", dev); - if (unlikely(ret)) { - dev_err(dev, "request RTC IRQ failed with %d\n", ret); - return ret; - } - - rtc_bfin_reset(rtc); + ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_SHARED, to_platform_device(dev)->name, dev); + if (!ret) + bfin_rtc_reset(dev); return ret; } static void bfin_rtc_release(struct device *dev) { - struct bfin_rtc *rtc = dev_get_drvdata(dev); - stampit(); - rtc_bfin_reset(rtc); + dev_dbg_stamp(dev); + bfin_rtc_reset(dev); free_irq(IRQ_RTC, dev); } +static void bfin_rtc_int_set(struct bfin_rtc *rtc, u16 rtc_int) +{ + bfin_write_RTC_ISTAT(rtc_int); + bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | rtc_int); +} +static void bfin_rtc_int_clear(struct bfin_rtc *rtc, u16 rtc_int) +{ + bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & rtc_int); +} +static void bfin_rtc_int_set_alarm(struct bfin_rtc *rtc) +{ + /* Blackfin has different bits for whether the alarm is + * more than 24 hours away. + */ + bfin_rtc_int_set(rtc, (rtc->rtc_alarm.tm_yday == -1 ? RTC_ISTAT_ALARM : RTC_ISTAT_ALARM_DAY)); +} static int bfin_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) { struct bfin_rtc *rtc = dev_get_drvdata(dev); + int ret = 0; + + dev_dbg_stamp(dev); - stampit(); + bfin_rtc_sync_pending(dev); switch (cmd) { case RTC_PIE_ON: - stampit(); - spin_lock_irq(&rtc->lock); - rtc_bfin_sync_pending(); - bfin_write_RTC_ISTAT(RTC_ISTAT_STOPWATCH); + dev_dbg_stamp(dev); + bfin_rtc_int_set(rtc, RTC_ISTAT_STOPWATCH); bfin_write_RTC_SWCNT(rtc->rtc_dev->irq_freq); - bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | RTC_ISTAT_STOPWATCH); - spin_unlock_irq(&rtc->lock); - return 0; + break; case RTC_PIE_OFF: - stampit(); - spin_lock_irq(&rtc->lock); - rtc_bfin_sync_pending(); - bfin_write_RTC_SWCNT(0); - bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & ~RTC_ISTAT_STOPWATCH); - spin_unlock_irq(&rtc->lock); - return 0; + dev_dbg_stamp(dev); + bfin_rtc_int_clear(rtc, ~RTC_ISTAT_STOPWATCH); + break; case RTC_UIE_ON: - stampit(); - spin_lock_irq(&rtc->lock); - rtc_bfin_sync_pending(); - bfin_write_RTC_ISTAT(RTC_ISTAT_SEC); - bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | RTC_ISTAT_SEC); - spin_unlock_irq(&rtc->lock); - return 0; + dev_dbg_stamp(dev); + bfin_rtc_int_set(rtc, RTC_ISTAT_SEC); + break; case RTC_UIE_OFF: - stampit(); - spin_lock_irq(&rtc->lock); - rtc_bfin_sync_pending(); - bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & ~RTC_ISTAT_SEC); - spin_unlock_irq(&rtc->lock); - return 0; - - case RTC_AIE_ON: { - unsigned long rtc_alarm; - u16 which_alarm; - int ret = 0; - - stampit(); - - spin_lock_irq(&rtc->lock); - - rtc_bfin_sync_pending(); - if (rtc->rtc_alarm.tm_yday == -1) { - struct rtc_time now; - rtc_bfin_to_tm(bfin_read_RTC_STAT(), &now); - now.tm_sec = rtc->rtc_alarm.tm_sec; - now.tm_min = rtc->rtc_alarm.tm_min; - now.tm_hour = rtc->rtc_alarm.tm_hour; - ret = rtc_tm_to_time(&now, &rtc_alarm); - which_alarm = RTC_ISTAT_ALARM; - } else { - ret = rtc_tm_to_time(&rtc->rtc_alarm, &rtc_alarm); - which_alarm = RTC_ISTAT_ALARM_DAY; - } - if (ret == 0) { - bfin_write_RTC_ISTAT(which_alarm); - bfin_write_RTC_ALARM(rtc_time_to_bfin(rtc_alarm)); - bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | which_alarm); - } - - spin_unlock_irq(&rtc->lock); - - return ret; - } + dev_dbg_stamp(dev); + bfin_rtc_int_clear(rtc, ~RTC_ISTAT_SEC); + break; + + case RTC_AIE_ON: + dev_dbg_stamp(dev); + bfin_rtc_int_set_alarm(rtc); + break; case RTC_AIE_OFF: - stampit(); - spin_lock_irq(&rtc->lock); - rtc_bfin_sync_pending(); - bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & ~(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY)); - spin_unlock_irq(&rtc->lock); - return 0; + dev_dbg_stamp(dev); + bfin_rtc_int_clear(rtc, ~(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY)); + break; + + default: + dev_dbg_stamp(dev); + ret = -ENOIOCTLCMD; } - return -ENOIOCTLCMD; + return ret; } static int bfin_rtc_read_time(struct device *dev, struct rtc_time *tm) { struct bfin_rtc *rtc = dev_get_drvdata(dev); - stampit(); + dev_dbg_stamp(dev); + + if (rtc->rtc_wrote_regs & 0x1) + bfin_rtc_sync_pending(dev); - spin_lock_irq(&rtc->lock); - rtc_bfin_sync_pending(); rtc_bfin_to_tm(bfin_read_RTC_STAT(), tm); - spin_unlock_irq(&rtc->lock); return 0; } @@ -304,64 +320,79 @@ static int bfin_rtc_set_time(struct device *dev, struct rtc_time *tm) int ret; unsigned long now; - stampit(); - - spin_lock_irq(&rtc->lock); + dev_dbg_stamp(dev); ret = rtc_tm_to_time(tm, &now); if (ret == 0) { - rtc_bfin_sync_pending(); + if (rtc->rtc_wrote_regs & 0x1) + bfin_rtc_sync_pending(dev); bfin_write_RTC_STAT(rtc_time_to_bfin(now)); + rtc->rtc_wrote_regs = 0x1; } - spin_unlock_irq(&rtc->lock); - return ret; } static int bfin_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) { struct bfin_rtc *rtc = dev_get_drvdata(dev); - stampit(); - memcpy(&alrm->time, &rtc->rtc_alarm, sizeof(struct rtc_time)); - alrm->pending = !!(bfin_read_RTC_ICTL() & (RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY)); + dev_dbg_stamp(dev); + alrm->time = rtc->rtc_alarm; + bfin_rtc_sync_pending(dev); + alrm->enabled = !!(bfin_read_RTC_ICTL() & (RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY)); return 0; } static int bfin_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) { struct bfin_rtc *rtc = dev_get_drvdata(dev); - stampit(); - memcpy(&rtc->rtc_alarm, &alrm->time, sizeof(struct rtc_time)); + unsigned long rtc_alarm; + + dev_dbg_stamp(dev); + + if (rtc_tm_to_time(&alrm->time, &rtc_alarm)) + return -EINVAL; + + rtc->rtc_alarm = alrm->time; + + bfin_rtc_sync_pending(dev); + bfin_write_RTC_ALARM(rtc_time_to_bfin(rtc_alarm)); + if (alrm->enabled) + bfin_rtc_int_set_alarm(rtc); + return 0; } static int bfin_rtc_proc(struct device *dev, struct seq_file *seq) { -#define yesno(x) (x ? "yes" : "no") +#define yesno(x) ((x) ? "yes" : "no") u16 ictl = bfin_read_RTC_ICTL(); - stampit(); - seq_printf(seq, "alarm_IRQ\t: %s\n", yesno(ictl & RTC_ISTAT_ALARM)); - seq_printf(seq, "wkalarm_IRQ\t: %s\n", yesno(ictl & RTC_ISTAT_ALARM_DAY)); - seq_printf(seq, "seconds_IRQ\t: %s\n", yesno(ictl & RTC_ISTAT_SEC)); - seq_printf(seq, "periodic_IRQ\t: %s\n", yesno(ictl & RTC_ISTAT_STOPWATCH)); -#ifdef DEBUG - seq_printf(seq, "RTC_STAT\t: 0x%08X\n", bfin_read_RTC_STAT()); - seq_printf(seq, "RTC_ICTL\t: 0x%04X\n", bfin_read_RTC_ICTL()); - seq_printf(seq, "RTC_ISTAT\t: 0x%04X\n", bfin_read_RTC_ISTAT()); - seq_printf(seq, "RTC_SWCNT\t: 0x%04X\n", bfin_read_RTC_SWCNT()); - seq_printf(seq, "RTC_ALARM\t: 0x%08X\n", bfin_read_RTC_ALARM()); - seq_printf(seq, "RTC_PREN\t: 0x%04X\n", bfin_read_RTC_PREN()); -#endif + dev_dbg_stamp(dev); + seq_printf(seq, + "alarm_IRQ\t: %s\n" + "wkalarm_IRQ\t: %s\n" + "seconds_IRQ\t: %s\n" + "periodic_IRQ\t: %s\n", + yesno(ictl & RTC_ISTAT_ALARM), + yesno(ictl & RTC_ISTAT_ALARM_DAY), + yesno(ictl & RTC_ISTAT_SEC), + yesno(ictl & RTC_ISTAT_STOPWATCH)); return 0; +#undef yesno } +/** + * bfin_irq_set_freq - make sure hardware supports requested freq + * @dev: pointer to RTC device structure + * @freq: requested frequency rate + * + * The Blackfin RTC can only generate periodic events at 1 per + * second (1 Hz), so reject any attempt at changing it. + */ static int bfin_irq_set_freq(struct device *dev, int freq) { - struct bfin_rtc *rtc = dev_get_drvdata(dev); - stampit(); - rtc->rtc_dev->irq_freq = freq; - return 0; + dev_dbg_stamp(dev); + return -ENOTTY; } static struct rtc_class_ops bfin_rtc_ops = { @@ -381,27 +412,24 @@ static int __devinit bfin_rtc_probe(struct platform_device *pdev) struct bfin_rtc *rtc; int ret = 0; - stampit(); + dev_dbg_stamp(&pdev->dev); rtc = kzalloc(sizeof(*rtc), GFP_KERNEL); if (unlikely(!rtc)) return -ENOMEM; - spin_lock_init(&rtc->lock); - rtc->rtc_dev = rtc_device_register(pdev->name, &pdev->dev, &bfin_rtc_ops, THIS_MODULE); if (unlikely(IS_ERR(rtc))) { ret = PTR_ERR(rtc->rtc_dev); goto err; } - rtc->rtc_dev->irq_freq = 0; - rtc->rtc_dev->max_user_freq = (2 << 16); /* stopwatch is an unsigned 16 bit reg */ + rtc->rtc_dev->irq_freq = 1; platform_set_drvdata(pdev, rtc); return 0; -err: + err: kfree(rtc); return ret; } @@ -428,7 +456,6 @@ static struct platform_driver bfin_rtc_driver = { static int __init bfin_rtc_init(void) { - stampit(); return platform_driver_register(&bfin_rtc_driver); } diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index 29cf145..e059f94 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -36,9 +36,24 @@ #include <linux/platform_device.h> #include <linux/mod_devicetable.h> +#ifdef CONFIG_HPET_EMULATE_RTC +#include <asm/hpet.h> +#endif + /* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */ #include <asm-generic/rtc.h> +#ifndef CONFIG_HPET_EMULATE_RTC +#define is_hpet_enabled() 0 +#define hpet_set_alarm_time(hrs, min, sec) do { } while (0) +#define hpet_set_periodic_freq(arg) 0 +#define hpet_mask_rtc_irq_bit(arg) do { } while (0) +#define hpet_set_rtc_irq_bit(arg) do { } while (0) +#define hpet_rtc_timer_init() do { } while (0) +#define hpet_register_irq_handler(h) 0 +#define hpet_unregister_irq_handler(h) do { } while (0) +extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id); +#endif struct cmos_rtc { struct rtc_device *rtc; @@ -199,6 +214,7 @@ static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t) sec = t->time.tm_sec; sec = (sec < 60) ? BIN2BCD(sec) : 0xff; + hpet_set_alarm_time(t->time.tm_hour, t->time.tm_min, t->time.tm_sec); spin_lock_irq(&rtc_lock); /* next rtc irq must not be from previous alarm setting */ @@ -252,7 +268,8 @@ static int cmos_irq_set_freq(struct device *dev, int freq) f = 16 - f; spin_lock_irqsave(&rtc_lock, flags); - CMOS_WRITE(RTC_REF_CLCK_32KHZ | f, RTC_FREQ_SELECT); + if (!hpet_set_periodic_freq(freq)) + CMOS_WRITE(RTC_REF_CLCK_32KHZ | f, RTC_FREQ_SELECT); spin_unlock_irqrestore(&rtc_lock, flags); return 0; @@ -314,28 +331,37 @@ cmos_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) switch (cmd) { case RTC_AIE_OFF: /* alarm off */ rtc_control &= ~RTC_AIE; + hpet_mask_rtc_irq_bit(RTC_AIE); break; case RTC_AIE_ON: /* alarm on */ rtc_control |= RTC_AIE; + hpet_set_rtc_irq_bit(RTC_AIE); break; case RTC_UIE_OFF: /* update off */ rtc_control &= ~RTC_UIE; + hpet_mask_rtc_irq_bit(RTC_UIE); break; case RTC_UIE_ON: /* update on */ rtc_control |= RTC_UIE; + hpet_set_rtc_irq_bit(RTC_UIE); break; case RTC_PIE_OFF: /* periodic off */ rtc_control &= ~RTC_PIE; + hpet_mask_rtc_irq_bit(RTC_PIE); break; case RTC_PIE_ON: /* periodic on */ rtc_control |= RTC_PIE; + hpet_set_rtc_irq_bit(RTC_PIE); break; } - CMOS_WRITE(rtc_control, RTC_CONTROL); + if (!is_hpet_enabled()) + CMOS_WRITE(rtc_control, RTC_CONTROL); + rtc_intr = CMOS_READ(RTC_INTR_FLAGS); rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF; if (is_intr(rtc_intr)) rtc_update_irq(cmos->rtc, 1, rtc_intr); + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } @@ -393,15 +419,111 @@ static const struct rtc_class_ops cmos_rtc_ops = { /*----------------------------------------------------------------*/ +/* + * All these chips have at least 64 bytes of address space, shared by + * RTC registers and NVRAM. Most of those bytes of NVRAM are used + * by boot firmware. Modern chips have 128 or 256 bytes. + */ + +#define NVRAM_OFFSET (RTC_REG_D + 1) + +static ssize_t +cmos_nvram_read(struct kobject *kobj, struct bin_attribute *attr, + char *buf, loff_t off, size_t count) +{ + int retval; + + if (unlikely(off >= attr->size)) + return 0; + if ((off + count) > attr->size) + count = attr->size - off; + + spin_lock_irq(&rtc_lock); + for (retval = 0, off += NVRAM_OFFSET; count--; retval++, off++) + *buf++ = CMOS_READ(off); + spin_unlock_irq(&rtc_lock); + + return retval; +} + +static ssize_t +cmos_nvram_write(struct kobject *kobj, struct bin_attribute *attr, + char *buf, loff_t off, size_t count) +{ + struct cmos_rtc *cmos; + int retval; + + cmos = dev_get_drvdata(container_of(kobj, struct device, kobj)); + if (unlikely(off >= attr->size)) + return -EFBIG; + if ((off + count) > attr->size) + count = attr->size - off; + + /* NOTE: on at least PCs and Ataris, the boot firmware uses a + * checksum on part of the NVRAM data. That's currently ignored + * here. If userspace is smart enough to know what fields of + * NVRAM to update, updating checksums is also part of its job. + */ + spin_lock_irq(&rtc_lock); + for (retval = 0, off += NVRAM_OFFSET; count--; retval++, off++) { + /* don't trash RTC registers */ + if (off == cmos->day_alrm + || off == cmos->mon_alrm + || off == cmos->century) + buf++; + else + CMOS_WRITE(*buf++, off); + } + spin_unlock_irq(&rtc_lock); + + return retval; +} + +static struct bin_attribute nvram = { + .attr = { + .name = "nvram", + .mode = S_IRUGO | S_IWUSR, + .owner = THIS_MODULE, + }, + + .read = cmos_nvram_read, + .write = cmos_nvram_write, + /* size gets set up later */ +}; + +/*----------------------------------------------------------------*/ + static struct cmos_rtc cmos_rtc; static irqreturn_t cmos_interrupt(int irq, void *p) { u8 irqstat; + u8 rtc_control; spin_lock(&rtc_lock); - irqstat = CMOS_READ(RTC_INTR_FLAGS); - irqstat &= (CMOS_READ(RTC_CONTROL) & RTC_IRQMASK) | RTC_IRQF; + /* + * In this case it is HPET RTC interrupt handler + * calling us, with the interrupt information + * passed as arg1, instead of irq. + */ + if (is_hpet_enabled()) + irqstat = (unsigned long)irq & 0xF0; + else { + irqstat = CMOS_READ(RTC_INTR_FLAGS); + rtc_control = CMOS_READ(RTC_CONTROL); + irqstat &= (rtc_control & RTC_IRQMASK) | RTC_IRQF; + } + + /* All Linux RTC alarms should be treated as if they were oneshot. + * Similar code may be needed in system wakeup paths, in case the + * alarm woke the system. + */ + if (irqstat & RTC_AIE) { + rtc_control = CMOS_READ(RTC_CONTROL); + rtc_control &= ~RTC_AIE; + CMOS_WRITE(rtc_control, RTC_CONTROL); + CMOS_READ(RTC_INTR_FLAGS); + } spin_unlock(&rtc_lock); if (is_intr(irqstat)) { @@ -412,11 +534,9 @@ static irqreturn_t cmos_interrupt(int irq, void *p) } #ifdef CONFIG_PNP -#define is_pnp() 1 #define INITSECTION #else -#define is_pnp() 0 #define INITSECTION __init #endif @@ -426,6 +546,7 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq) struct cmos_rtc_board_info *info = dev->platform_data; int retval = 0; unsigned char rtc_control; + unsigned address_space; /* there can be only one ... */ if (cmos_rtc.dev) @@ -450,15 +571,36 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq) cmos_rtc.irq = rtc_irq; cmos_rtc.iomem = ports; + /* Heuristic to deduce NVRAM size ... do what the legacy NVRAM + * driver did, but don't reject unknown configs. Old hardware + * won't address 128 bytes, and for now we ignore the way newer + * chips can address 256 bytes (using two more i/o ports). + */ +#if defined(CONFIG_ATARI) + address_space = 64; +#elif defined(__i386__) || defined(__x86_64__) || defined(__arm__) + address_space = 128; +#else +#warning Assuming 128 bytes of RTC+NVRAM address space, not 64 bytes. + address_space = 128; +#endif + /* For ACPI systems extension info comes from the FADT. On others, * board specific setup provides it as appropriate. Systems where * the alarm IRQ isn't automatically a wakeup IRQ (like ACPI, and * some almost-clones) can provide hooks to make that behave. + * + * Note that ACPI doesn't preclude putting these registers into + * "extended" areas of the chip, including some that we won't yet + * expect CMOS_READ and friends to handle. */ if (info) { - cmos_rtc.day_alrm = info->rtc_day_alarm; - cmos_rtc.mon_alrm = info->rtc_mon_alarm; - cmos_rtc.century = info->rtc_century; + if (info->rtc_day_alarm && info->rtc_day_alarm < 128) + cmos_rtc.day_alrm = info->rtc_day_alarm; + if (info->rtc_mon_alarm && info->rtc_mon_alarm < 128) + cmos_rtc.mon_alrm = info->rtc_mon_alarm; + if (info->rtc_century && info->rtc_century < 128) + cmos_rtc.century = info->rtc_century; if (info->wake_on && info->wake_off) { cmos_rtc.wake_on = info->wake_on; @@ -485,8 +627,9 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq) * doesn't use 32KHz here ... for portability we might need to * do something about other clock frequencies. */ - CMOS_WRITE(RTC_REF_CLCK_32KHZ | 0x06, RTC_FREQ_SELECT); cmos_rtc.rtc->irq_freq = 1024; + if (!hpet_set_periodic_freq(cmos_rtc.rtc->irq_freq)) + CMOS_WRITE(RTC_REF_CLCK_32KHZ | 0x06, RTC_FREQ_SELECT); /* disable irqs. * @@ -509,19 +652,39 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq) goto cleanup1; } - if (is_valid_irq(rtc_irq)) - retval = request_irq(rtc_irq, cmos_interrupt, IRQF_DISABLED, - cmos_rtc.rtc->dev.bus_id, + if (is_valid_irq(rtc_irq)) { + irq_handler_t rtc_cmos_int_handler; + + if (is_hpet_enabled()) { + int err; + + rtc_cmos_int_handler = hpet_rtc_interrupt; + err = hpet_register_irq_handler(cmos_interrupt); + if (err != 0) { + printk(KERN_WARNING "hpet_register_irq_handler " + " failed in rtc_init()."); + goto cleanup1; + } + } else + rtc_cmos_int_handler = cmos_interrupt; + + retval = request_irq(rtc_irq, rtc_cmos_int_handler, + IRQF_DISABLED, cmos_rtc.rtc->dev.bus_id, cmos_rtc.rtc); - if (retval < 0) { - dev_dbg(dev, "IRQ %d is already in use\n", rtc_irq); - goto cleanup1; + if (retval < 0) { + dev_dbg(dev, "IRQ %d is already in use\n", rtc_irq); + goto cleanup1; + } } + hpet_rtc_timer_init(); - /* REVISIT optionally make 50 or 114 bytes NVRAM available, - * like rtc-ds1553, rtc-ds1742 ... this will often include - * registers for century, and day/month alarm. - */ + /* export at least the first block of NVRAM */ + nvram.size = address_space - NVRAM_OFFSET; + retval = sysfs_create_bin_file(&dev->kobj, &nvram); + if (retval < 0) { + dev_dbg(dev, "can't create nvram file? %d\n", retval); + goto cleanup2; + } pr_info("%s: alarms up to one %s%s\n", cmos_rtc.rtc->dev.bus_id, @@ -536,6 +699,9 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq) return 0; +cleanup2: + if (is_valid_irq(rtc_irq)) + free_irq(rtc_irq, cmos_rtc.rtc); cleanup1: cmos_rtc.dev = NULL; rtc_device_unregister(cmos_rtc.rtc); @@ -563,8 +729,12 @@ static void __exit cmos_do_remove(struct device *dev) cmos_do_shutdown(); - if (is_valid_irq(cmos->irq)) + sysfs_remove_bin_file(&dev->kobj, &nvram); + + if (is_valid_irq(cmos->irq)) { free_irq(cmos->irq, cmos->rtc); + hpet_unregister_irq_handler(cmos_interrupt); + } rtc_device_unregister(cmos->rtc); cmos->rtc = NULL; @@ -659,9 +829,12 @@ static int cmos_resume(struct device *dev) /*----------------------------------------------------------------*/ -/* The "CMOS" RTC normally lives on the platform_bus. On ACPI systems, - * the device node will always be created as a PNPACPI device. Plus - * pre-ACPI PCs probably list it in the PNPBIOS tables. +/* On non-x86 systems, a "CMOS" RTC lives most naturally on platform_bus. + * ACPI systems always list these as PNPACPI devices, and pre-ACPI PCs + * probably list them in similar PNPBIOS tables; so PNP is more common. + * + * We don't use legacy "poke at the hardware" probing. Ancient PCs that + * predate even PNPBIOS should set up platform_bus devices. */ #ifdef CONFIG_PNP diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c index 025c60a..90dfa0d 100644 --- a/drivers/rtc/rtc-dev.c +++ b/drivers/rtc/rtc-dev.c @@ -246,6 +246,15 @@ static int rtc_dev_ioctl(struct inode *inode, struct file *file, /* if the driver does not provide the ioctl interface * or if that particular ioctl was not implemented * (-ENOIOCTLCMD), we will try to emulate here. + * + * Drivers *SHOULD NOT* provide ioctl implementations + * for these requests. Instead, provide methods to + * support the following code, so that the RTC's main + * features are accessible without using ioctls. + * + * RTC and alarm times will be in UTC, by preference, + * but dual-booting with MS-Windows implies RTCs must + * use the local wall clock time. */ switch (cmd) { diff --git a/drivers/rtc/rtc-ds1302.c b/drivers/rtc/rtc-ds1302.c new file mode 100644 index 0000000..7b002ce --- /dev/null +++ b/drivers/rtc/rtc-ds1302.c @@ -0,0 +1,262 @@ +/* + * Dallas DS1302 RTC Support + * + * Copyright (C) 2002 David McCullough + * Copyright (C) 2003 - 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License version 2. See the file "COPYING" in the main directory of + * this archive for more details. + */ +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/time.h> +#include <linux/rtc.h> +#include <linux/spinlock.h> +#include <linux/io.h> +#include <linux/bcd.h> +#include <asm/rtc.h> + +#define DRV_NAME "rtc-ds1302" +#define DRV_VERSION "0.1.0" + +#define RTC_CMD_READ 0x81 /* Read command */ +#define RTC_CMD_WRITE 0x80 /* Write command */ + +#define RTC_ADDR_RAM0 0x20 /* Address of RAM0 */ +#define RTC_ADDR_TCR 0x08 /* Address of trickle charge register */ +#define RTC_ADDR_YEAR 0x06 /* Address of year register */ +#define RTC_ADDR_DAY 0x05 /* Address of day of week register */ +#define RTC_ADDR_MON 0x04 /* Address of month register */ +#define RTC_ADDR_DATE 0x03 /* Address of day of month register */ +#define RTC_ADDR_HOUR 0x02 /* Address of hour register */ +#define RTC_ADDR_MIN 0x01 /* Address of minute register */ +#define RTC_ADDR_SEC 0x00 /* Address of second register */ + +#define RTC_RESET 0x1000 +#define RTC_IODATA 0x0800 +#define RTC_SCLK 0x0400 + +#ifdef CONFIG_SH_SECUREEDGE5410 +#include <asm/snapgear.h> +#define set_dp(x) SECUREEDGE_WRITE_IOPORT(x, 0x1c00) +#define get_dp() SECUREEDGE_READ_IOPORT() +#else +#error "Add support for your platform" +#endif + +struct ds1302_rtc { + struct rtc_device *rtc_dev; + spinlock_t lock; +}; + +static void ds1302_sendbits(unsigned int val) +{ + int i; + + for (i = 8; (i); i--, val >>= 1) { + set_dp((get_dp() & ~RTC_IODATA) | ((val & 0x1) ? + RTC_IODATA : 0)); + set_dp(get_dp() | RTC_SCLK); /* clock high */ + set_dp(get_dp() & ~RTC_SCLK); /* clock low */ + } +} + +static unsigned int ds1302_recvbits(void) +{ + unsigned int val; + int i; + + for (i = 0, val = 0; (i < 8); i++) { + val |= (((get_dp() & RTC_IODATA) ? 1 : 0) << i); + set_dp(get_dp() | RTC_SCLK); /* clock high */ + set_dp(get_dp() & ~RTC_SCLK); /* clock low */ + } + + return val; +} + +static unsigned int ds1302_readbyte(unsigned int addr) +{ + unsigned int val; + + set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK)); + + set_dp(get_dp() | RTC_RESET); + ds1302_sendbits(((addr & 0x3f) << 1) | RTC_CMD_READ); + val = ds1302_recvbits(); + set_dp(get_dp() & ~RTC_RESET); + + return val; +} + +static void ds1302_writebyte(unsigned int addr, unsigned int val) +{ + set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK)); + set_dp(get_dp() | RTC_RESET); + ds1302_sendbits(((addr & 0x3f) << 1) | RTC_CMD_WRITE); + ds1302_sendbits(val); + set_dp(get_dp() & ~RTC_RESET); +} + +static int ds1302_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + struct ds1302_rtc *rtc = dev_get_drvdata(dev); + + spin_lock_irq(&rtc->lock); + + tm->tm_sec = BCD2BIN(ds1302_readbyte(RTC_ADDR_SEC)); + tm->tm_min = BCD2BIN(ds1302_readbyte(RTC_ADDR_MIN)); + tm->tm_hour = BCD2BIN(ds1302_readbyte(RTC_ADDR_HOUR)); + tm->tm_wday = BCD2BIN(ds1302_readbyte(RTC_ADDR_DAY)); + tm->tm_mday = BCD2BIN(ds1302_readbyte(RTC_ADDR_DATE)); + tm->tm_mon = BCD2BIN(ds1302_readbyte(RTC_ADDR_MON)) - 1; + tm->tm_year = BCD2BIN(ds1302_readbyte(RTC_ADDR_YEAR)); + + if (tm->tm_year < 70) + tm->tm_year += 100; + + spin_unlock_irq(&rtc->lock); + + dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, " + "mday=%d, mon=%d, year=%d, wday=%d\n", + __FUNCTION__, + tm->tm_sec, tm->tm_min, tm->tm_hour, + tm->tm_mday, tm->tm_mon + 1, tm->tm_year, tm->tm_wday); + + if (rtc_valid_tm(tm) < 0) + dev_err(dev, "invalid date\n"); + + return 0; +} + +static int ds1302_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + struct ds1302_rtc *rtc = dev_get_drvdata(dev); + + spin_lock_irq(&rtc->lock); + + /* Stop RTC */ + ds1302_writebyte(RTC_ADDR_SEC, ds1302_readbyte(RTC_ADDR_SEC) | 0x80); + + ds1302_writebyte(RTC_ADDR_SEC, BIN2BCD(tm->tm_sec)); + ds1302_writebyte(RTC_ADDR_MIN, BIN2BCD(tm->tm_min)); + ds1302_writebyte(RTC_ADDR_HOUR, BIN2BCD(tm->tm_hour)); + ds1302_writebyte(RTC_ADDR_DAY, BIN2BCD(tm->tm_wday)); + ds1302_writebyte(RTC_ADDR_DATE, BIN2BCD(tm->tm_mday)); + ds1302_writebyte(RTC_ADDR_MON, BIN2BCD(tm->tm_mon + 1)); + ds1302_writebyte(RTC_ADDR_YEAR, BIN2BCD(tm->tm_year % 100)); + + /* Start RTC */ + ds1302_writebyte(RTC_ADDR_SEC, ds1302_readbyte(RTC_ADDR_SEC) & ~0x80); + + spin_unlock_irq(&rtc->lock); + + return 0; +} + +static int ds1302_rtc_ioctl(struct device *dev, unsigned int cmd, + unsigned long arg) +{ + switch (cmd) { +#ifdef RTC_SET_CHARGE + case RTC_SET_CHARGE: + { + struct ds1302_rtc *rtc = dev_get_drvdata(dev); + int tcs_val; + + if (copy_from_user(&tcs_val, (int __user *)arg, sizeof(int))) + return -EFAULT; + + spin_lock_irq(&rtc->lock); + ds1302_writebyte(RTC_ADDR_TCR, (0xa0 | tcs_val * 0xf)); + spin_unlock_irq(&rtc->lock); + return 0; + } +#endif + } + + return -ENOIOCTLCMD; +} + +static struct rtc_class_ops ds1302_rtc_ops = { + .read_time = ds1302_rtc_read_time, + .set_time = ds1302_rtc_set_time, + .ioctl = ds1302_rtc_ioctl, +}; + +static int __devinit ds1302_rtc_probe(struct platform_device *pdev) +{ + struct ds1302_rtc *rtc; + int ret; + + /* Reset */ + set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK)); + + /* Write a magic value to the DS1302 RAM, and see if it sticks. */ + ds1302_writebyte(RTC_ADDR_RAM0, 0x42); + if (ds1302_readbyte(RTC_ADDR_RAM0) != 0x42) + return -ENODEV; + + rtc = kzalloc(sizeof(struct ds1302_rtc), GFP_KERNEL); + if (unlikely(!rtc)) + return -ENOMEM; + + spin_lock_init(&rtc->lock); + rtc->rtc_dev = rtc_device_register("ds1302", &pdev->dev, + &ds1302_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc->rtc_dev)) { + ret = PTR_ERR(rtc->rtc_dev); + goto out; + } + + platform_set_drvdata(pdev, rtc); + + return 0; +out: + kfree(rtc); + return ret; +} + +static int __devexit ds1302_rtc_remove(struct platform_device *pdev) +{ + struct ds1302_rtc *rtc = platform_get_drvdata(pdev); + + if (likely(rtc->rtc_dev)) + rtc_device_unregister(rtc->rtc_dev); + + platform_set_drvdata(pdev, NULL); + + kfree(rtc); + + return 0; +} + +static struct platform_driver ds1302_platform_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .probe = ds1302_rtc_probe, + .remove = __devexit_p(ds1302_rtc_remove), +}; + +static int __init ds1302_rtc_init(void) +{ + return platform_driver_register(&ds1302_platform_driver); +} + +static void __exit ds1302_rtc_exit(void) +{ + platform_driver_unregister(&ds1302_platform_driver); +} + +module_init(ds1302_rtc_init); +module_exit(ds1302_rtc_exit); + +MODULE_DESCRIPTION("Dallas DS1302 RTC driver"); +MODULE_VERSION(DRV_VERSION); +MODULE_AUTHOR("Paul Mundt, David McCullough"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c index bc1c7fe..f389a28 100644 --- a/drivers/rtc/rtc-ds1307.c +++ b/drivers/rtc/rtc-ds1307.c @@ -256,7 +256,7 @@ ds1307_nvram_read(struct kobject *kobj, struct bin_attribute *attr, struct i2c_msg msg[2]; int result; - client = to_i2c_client(container_of(kobj, struct device, kobj)); + client = kobj_to_i2c_client(kobj); ds1307 = i2c_get_clientdata(client); if (unlikely(off >= NVRAM_SIZE)) @@ -294,7 +294,7 @@ ds1307_nvram_write(struct kobject *kobj, struct bin_attribute *attr, u8 buffer[NVRAM_SIZE + 1]; int ret; - client = to_i2c_client(container_of(kobj, struct device, kobj)); + client = kobj_to_i2c_client(kobj); if (unlikely(off >= NVRAM_SIZE)) return -EFBIG; @@ -412,11 +412,6 @@ read_rtc: */ tmp = ds1307->regs[DS1307_REG_SECS]; switch (ds1307->type) { - case ds_1340: - /* FIXME read register with DS1340_BIT_OSF, use that to - * trigger the "set time" warning (*after* restarting the - * oscillator!) instead of this weaker ds1307/m41t00 test. - */ case ds_1307: case m41t00: /* clock halted? turn it on, so clock can tick. */ @@ -440,6 +435,24 @@ read_rtc: goto read_rtc; } break; + case ds_1340: + /* clock halted? turn it on, so clock can tick. */ + if (tmp & DS1340_BIT_nEOSC) + i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0); + + tmp = i2c_smbus_read_byte_data(client, DS1340_REG_FLAG); + if (tmp < 0) { + pr_debug("read error %d\n", tmp); + err = -EIO; + goto exit_free; + } + + /* oscillator fault? clear flag, and warn */ + if (tmp & DS1340_BIT_OSF) { + i2c_smbus_write_byte_data(client, DS1340_REG_FLAG, 0); + dev_warn(&client->dev, "SET TIME!\n"); + } + break; case ds_1337: case ds_1339: break; diff --git a/drivers/rtc/rtc-ds1511.c b/drivers/rtc/rtc-ds1511.c new file mode 100644 index 0000000..d74b808 --- /dev/null +++ b/drivers/rtc/rtc-ds1511.c @@ -0,0 +1,656 @@ +/* + * An rtc driver for the Dallas DS1511 + * + * Copyright (C) 2006 Atsushi Nemoto <anemo@mba.ocn.ne.jp> + * Copyright (C) 2007 Andrew Sharp <andy.sharp@onstor.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Real time clock driver for the Dallas 1511 chip, which also + * contains a watchdog timer. There is a tiny amount of code that + * platform code could use to mess with the watchdog device a little + * bit, but not a full watchdog driver. + */ + +#include <linux/bcd.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/rtc.h> +#include <linux/platform_device.h> +#include <linux/io.h> + +#define DRV_VERSION "0.6" + +enum ds1511reg { + DS1511_SEC = 0x0, + DS1511_MIN = 0x1, + DS1511_HOUR = 0x2, + DS1511_DOW = 0x3, + DS1511_DOM = 0x4, + DS1511_MONTH = 0x5, + DS1511_YEAR = 0x6, + DS1511_CENTURY = 0x7, + DS1511_AM1_SEC = 0x8, + DS1511_AM2_MIN = 0x9, + DS1511_AM3_HOUR = 0xa, + DS1511_AM4_DATE = 0xb, + DS1511_WD_MSEC = 0xc, + DS1511_WD_SEC = 0xd, + DS1511_CONTROL_A = 0xe, + DS1511_CONTROL_B = 0xf, + DS1511_RAMADDR_LSB = 0x10, + DS1511_RAMDATA = 0x13 +}; + +#define DS1511_BLF1 0x80 +#define DS1511_BLF2 0x40 +#define DS1511_PRS 0x20 +#define DS1511_PAB 0x10 +#define DS1511_TDF 0x08 +#define DS1511_KSF 0x04 +#define DS1511_WDF 0x02 +#define DS1511_IRQF 0x01 +#define DS1511_TE 0x80 +#define DS1511_CS 0x40 +#define DS1511_BME 0x20 +#define DS1511_TPE 0x10 +#define DS1511_TIE 0x08 +#define DS1511_KIE 0x04 +#define DS1511_WDE 0x02 +#define DS1511_WDS 0x01 +#define DS1511_RAM_MAX 0xff + +#define RTC_CMD DS1511_CONTROL_B +#define RTC_CMD1 DS1511_CONTROL_A + +#define RTC_ALARM_SEC DS1511_AM1_SEC +#define RTC_ALARM_MIN DS1511_AM2_MIN +#define RTC_ALARM_HOUR DS1511_AM3_HOUR +#define RTC_ALARM_DATE DS1511_AM4_DATE + +#define RTC_SEC DS1511_SEC +#define RTC_MIN DS1511_MIN +#define RTC_HOUR DS1511_HOUR +#define RTC_DOW DS1511_DOW +#define RTC_DOM DS1511_DOM +#define RTC_MON DS1511_MONTH +#define RTC_YEAR DS1511_YEAR +#define RTC_CENTURY DS1511_CENTURY + +#define RTC_TIE DS1511_TIE +#define RTC_TE DS1511_TE + +struct rtc_plat_data { + struct rtc_device *rtc; + void __iomem *ioaddr; /* virtual base address */ + unsigned long baseaddr; /* physical base address */ + int size; /* amount of memory mapped */ + int irq; + unsigned int irqen; + int alrm_sec; + int alrm_min; + int alrm_hour; + int alrm_mday; +}; + +static DEFINE_SPINLOCK(ds1511_lock); + +static __iomem char *ds1511_base; +static u32 reg_spacing = 1; + + static noinline void +rtc_write(uint8_t val, uint32_t reg) +{ + writeb(val, ds1511_base + (reg * reg_spacing)); +} + + static inline void +rtc_write_alarm(uint8_t val, enum ds1511reg reg) +{ + rtc_write((val | 0x80), reg); +} + + static noinline uint8_t +rtc_read(enum ds1511reg reg) +{ + return readb(ds1511_base + (reg * reg_spacing)); +} + + static inline void +rtc_disable_update(void) +{ + rtc_write((rtc_read(RTC_CMD) & ~RTC_TE), RTC_CMD); +} + + static void +rtc_enable_update(void) +{ + rtc_write((rtc_read(RTC_CMD) | RTC_TE), RTC_CMD); +} + +/* + * #define DS1511_WDOG_RESET_SUPPORT + * + * Uncomment this if you want to use these routines in + * some platform code. + */ +#ifdef DS1511_WDOG_RESET_SUPPORT +/* + * just enough code to set the watchdog timer so that it + * will reboot the system + */ + void +ds1511_wdog_set(unsigned long deciseconds) +{ + /* + * the wdog timer can take 99.99 seconds + */ + deciseconds %= 10000; + /* + * set the wdog values in the wdog registers + */ + rtc_write(BIN2BCD(deciseconds % 100), DS1511_WD_MSEC); + rtc_write(BIN2BCD(deciseconds / 100), DS1511_WD_SEC); + /* + * set wdog enable and wdog 'steering' bit to issue a reset + */ + rtc_write(DS1511_WDE | DS1511_WDS, RTC_CMD); +} + + void +ds1511_wdog_disable(void) +{ + /* + * clear wdog enable and wdog 'steering' bits + */ + rtc_write(rtc_read(RTC_CMD) & ~(DS1511_WDE | DS1511_WDS), RTC_CMD); + /* + * clear the wdog counter + */ + rtc_write(0, DS1511_WD_MSEC); + rtc_write(0, DS1511_WD_SEC); +} +#endif + +/* + * set the rtc chip's idea of the time. + * stupidly, some callers call with year unmolested; + * and some call with year = year - 1900. thanks. + */ + int +ds1511_rtc_set_time(struct device *dev, struct rtc_time *rtc_tm) +{ + u8 mon, day, dow, hrs, min, sec, yrs, cen; + unsigned int flags; + + /* + * won't have to change this for a while + */ + if (rtc_tm->tm_year < 1900) { + rtc_tm->tm_year += 1900; + } + + if (rtc_tm->tm_year < 1970) { + return -EINVAL; + } + yrs = rtc_tm->tm_year % 100; + cen = rtc_tm->tm_year / 100; + mon = rtc_tm->tm_mon + 1; /* tm_mon starts at zero */ + day = rtc_tm->tm_mday; + dow = rtc_tm->tm_wday & 0x7; /* automatic BCD */ + hrs = rtc_tm->tm_hour; + min = rtc_tm->tm_min; + sec = rtc_tm->tm_sec; + + if ((mon > 12) || (day == 0)) { + return -EINVAL; + } + + if (day > rtc_month_days(rtc_tm->tm_mon, rtc_tm->tm_year)) { + return -EINVAL; + } + + if ((hrs >= 24) || (min >= 60) || (sec >= 60)) { + return -EINVAL; + } + + /* + * each register is a different number of valid bits + */ + sec = BIN2BCD(sec) & 0x7f; + min = BIN2BCD(min) & 0x7f; + hrs = BIN2BCD(hrs) & 0x3f; + day = BIN2BCD(day) & 0x3f; + mon = BIN2BCD(mon) & 0x1f; + yrs = BIN2BCD(yrs) & 0xff; + cen = BIN2BCD(cen) & 0xff; + + spin_lock_irqsave(&ds1511_lock, flags); + rtc_disable_update(); + rtc_write(cen, RTC_CENTURY); + rtc_write(yrs, RTC_YEAR); + rtc_write((rtc_read(RTC_MON) & 0xe0) | mon, RTC_MON); + rtc_write(day, RTC_DOM); + rtc_write(hrs, RTC_HOUR); + rtc_write(min, RTC_MIN); + rtc_write(sec, RTC_SEC); + rtc_write(dow, RTC_DOW); + rtc_enable_update(); + spin_unlock_irqrestore(&ds1511_lock, flags); + + return 0; +} + + int +ds1511_rtc_read_time(struct device *dev, struct rtc_time *rtc_tm) +{ + unsigned int century; + unsigned int flags; + + spin_lock_irqsave(&ds1511_lock, flags); + rtc_disable_update(); + + rtc_tm->tm_sec = rtc_read(RTC_SEC) & 0x7f; + rtc_tm->tm_min = rtc_read(RTC_MIN) & 0x7f; + rtc_tm->tm_hour = rtc_read(RTC_HOUR) & 0x3f; + rtc_tm->tm_mday = rtc_read(RTC_DOM) & 0x3f; + rtc_tm->tm_wday = rtc_read(RTC_DOW) & 0x7; + rtc_tm->tm_mon = rtc_read(RTC_MON) & 0x1f; + rtc_tm->tm_year = rtc_read(RTC_YEAR) & 0x7f; + century = rtc_read(RTC_CENTURY); + + rtc_enable_update(); + spin_unlock_irqrestore(&ds1511_lock, flags); + + rtc_tm->tm_sec = BCD2BIN(rtc_tm->tm_sec); + rtc_tm->tm_min = BCD2BIN(rtc_tm->tm_min); + rtc_tm->tm_hour = BCD2BIN(rtc_tm->tm_hour); + rtc_tm->tm_mday = BCD2BIN(rtc_tm->tm_mday); + rtc_tm->tm_wday = BCD2BIN(rtc_tm->tm_wday); + rtc_tm->tm_mon = BCD2BIN(rtc_tm->tm_mon); + rtc_tm->tm_year = BCD2BIN(rtc_tm->tm_year); + century = BCD2BIN(century) * 100; + + /* + * Account for differences between how the RTC uses the values + * and how they are defined in a struct rtc_time; + */ + century += rtc_tm->tm_year; + rtc_tm->tm_year = century - 1900; + + rtc_tm->tm_mon--; + + if (rtc_valid_tm(rtc_tm) < 0) { + dev_err(dev, "retrieved date/time is not valid.\n"); + rtc_time_to_tm(0, rtc_tm); + } + return 0; +} + +/* + * write the alarm register settings + * + * we only have the use to interrupt every second, otherwise + * known as the update interrupt, or the interrupt if the whole + * date/hours/mins/secs matches. the ds1511 has many more + * permutations, but the kernel doesn't. + */ + static void +ds1511_rtc_update_alarm(struct rtc_plat_data *pdata) +{ + unsigned long flags; + + spin_lock_irqsave(&pdata->rtc->irq_lock, flags); + rtc_write(pdata->alrm_mday < 0 || (pdata->irqen & RTC_UF) ? + 0x80 : BIN2BCD(pdata->alrm_mday) & 0x3f, + RTC_ALARM_DATE); + rtc_write(pdata->alrm_hour < 0 || (pdata->irqen & RTC_UF) ? + 0x80 : BIN2BCD(pdata->alrm_hour) & 0x3f, + RTC_ALARM_HOUR); + rtc_write(pdata->alrm_min < 0 || (pdata->irqen & RTC_UF) ? + 0x80 : BIN2BCD(pdata->alrm_min) & 0x7f, + RTC_ALARM_MIN); + rtc_write(pdata->alrm_sec < 0 || (pdata->irqen & RTC_UF) ? + 0x80 : BIN2BCD(pdata->alrm_sec) & 0x7f, + RTC_ALARM_SEC); + rtc_write(rtc_read(RTC_CMD) | (pdata->irqen ? RTC_TIE : 0), RTC_CMD); + rtc_read(RTC_CMD1); /* clear interrupts */ + spin_unlock_irqrestore(&pdata->rtc->irq_lock, flags); +} + + static int +ds1511_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct platform_device *pdev = to_platform_device(dev); + struct rtc_plat_data *pdata = platform_get_drvdata(pdev); + + if (pdata->irq < 0) { + return -EINVAL; + } + pdata->alrm_mday = alrm->time.tm_mday; + pdata->alrm_hour = alrm->time.tm_hour; + pdata->alrm_min = alrm->time.tm_min; + pdata->alrm_sec = alrm->time.tm_sec; + if (alrm->enabled) { + pdata->irqen |= RTC_AF; + } + ds1511_rtc_update_alarm(pdata); + return 0; +} + + static int +ds1511_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct platform_device *pdev = to_platform_device(dev); + struct rtc_plat_data *pdata = platform_get_drvdata(pdev); + + if (pdata->irq < 0) { + return -EINVAL; + } + alrm->time.tm_mday = pdata->alrm_mday < 0 ? 0 : pdata->alrm_mday; + alrm->time.tm_hour = pdata->alrm_hour < 0 ? 0 : pdata->alrm_hour; + alrm->time.tm_min = pdata->alrm_min < 0 ? 0 : pdata->alrm_min; + alrm->time.tm_sec = pdata->alrm_sec < 0 ? 0 : pdata->alrm_sec; + alrm->enabled = (pdata->irqen & RTC_AF) ? 1 : 0; + return 0; +} + + static irqreturn_t +ds1511_interrupt(int irq, void *dev_id) +{ + struct platform_device *pdev = dev_id; + struct rtc_plat_data *pdata = platform_get_drvdata(pdev); + unsigned long events = RTC_IRQF; + + /* + * read and clear interrupt + */ + if (!(rtc_read(RTC_CMD1) & DS1511_IRQF)) { + return IRQ_NONE; + } + if (rtc_read(RTC_ALARM_SEC) & 0x80) { + events |= RTC_UF; + } else { + events |= RTC_AF; + } + rtc_update_irq(pdata->rtc, 1, events); + return IRQ_HANDLED; +} + + static void +ds1511_rtc_release(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct rtc_plat_data *pdata = platform_get_drvdata(pdev); + + if (pdata->irq >= 0) { + pdata->irqen = 0; + ds1511_rtc_update_alarm(pdata); + } +} + + static int +ds1511_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) +{ + struct platform_device *pdev = to_platform_device(dev); + struct rtc_plat_data *pdata = platform_get_drvdata(pdev); + + if (pdata->irq < 0) { + return -ENOIOCTLCMD; /* fall back into rtc-dev's emulation */ + } + switch (cmd) { + case RTC_AIE_OFF: + pdata->irqen &= ~RTC_AF; + ds1511_rtc_update_alarm(pdata); + break; + case RTC_AIE_ON: + pdata->irqen |= RTC_AF; + ds1511_rtc_update_alarm(pdata); + break; + case RTC_UIE_OFF: + pdata->irqen &= ~RTC_UF; + ds1511_rtc_update_alarm(pdata); + break; + case RTC_UIE_ON: + pdata->irqen |= RTC_UF; + ds1511_rtc_update_alarm(pdata); + break; + default: + return -ENOIOCTLCMD; + } + return 0; +} + +static const struct rtc_class_ops ds1511_rtc_ops = { + .read_time = ds1511_rtc_read_time, + .set_time = ds1511_rtc_set_time, + .read_alarm = ds1511_rtc_read_alarm, + .set_alarm = ds1511_rtc_set_alarm, + .release = ds1511_rtc_release, + .ioctl = ds1511_rtc_ioctl, +}; + + static ssize_t +ds1511_nvram_read(struct kobject *kobj, struct bin_attribute *ba, + char *buf, loff_t pos, size_t size) +{ + ssize_t count; + + /* + * if count is more than one, turn on "burst" mode + * turn it off when you're done + */ + if (size > 1) { + rtc_write((rtc_read(RTC_CMD) | DS1511_BME), RTC_CMD); + } + if (pos > DS1511_RAM_MAX) { + pos = DS1511_RAM_MAX; + } + if (size + pos > DS1511_RAM_MAX + 1) { + size = DS1511_RAM_MAX - pos + 1; + } + rtc_write(pos, DS1511_RAMADDR_LSB); + for (count = 0; size > 0; count++, size--) { + *buf++ = rtc_read(DS1511_RAMDATA); + } + if (count > 1) { + rtc_write((rtc_read(RTC_CMD) & ~DS1511_BME), RTC_CMD); + } + return count; +} + + static ssize_t +ds1511_nvram_write(struct kobject *kobj, struct bin_attribute *bin_attr, + char *buf, loff_t pos, size_t size) +{ + ssize_t count; + + /* + * if count is more than one, turn on "burst" mode + * turn it off when you're done + */ + if (size > 1) { + rtc_write((rtc_read(RTC_CMD) | DS1511_BME), RTC_CMD); + } + if (pos > DS1511_RAM_MAX) { + pos = DS1511_RAM_MAX; + } + if (size + pos > DS1511_RAM_MAX + 1) { + size = DS1511_RAM_MAX - pos + 1; + } + rtc_write(pos, DS1511_RAMADDR_LSB); + for (count = 0; size > 0; count++, size--) { + rtc_write(*buf++, DS1511_RAMDATA); + } + if (count > 1) { + rtc_write((rtc_read(RTC_CMD) & ~DS1511_BME), RTC_CMD); + } + return count; +} + +static struct bin_attribute ds1511_nvram_attr = { + .attr = { + .name = "nvram", + .mode = S_IRUGO | S_IWUGO, + .owner = THIS_MODULE, + }, + .size = DS1511_RAM_MAX, + .read = ds1511_nvram_read, + .write = ds1511_nvram_write, +}; + + static int __devinit +ds1511_rtc_probe(struct platform_device *pdev) +{ + struct rtc_device *rtc; + struct resource *res; + struct rtc_plat_data *pdata = NULL; + int ret = 0; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + return -ENODEV; + } + pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + return -ENOMEM; + } + pdata->irq = -1; + pdata->size = res->end - res->start + 1; + if (!request_mem_region(res->start, pdata->size, pdev->name)) { + ret = -EBUSY; + goto out; + } + pdata->baseaddr = res->start; + pdata->size = pdata->size; + ds1511_base = ioremap(pdata->baseaddr, pdata->size); + if (!ds1511_base) { + ret = -ENOMEM; + goto out; + } + pdata->ioaddr = ds1511_base; + pdata->irq = platform_get_irq(pdev, 0); + + /* + * turn on the clock and the crystal, etc. + */ + rtc_write(0, RTC_CMD); + rtc_write(0, RTC_CMD1); + /* + * clear the wdog counter + */ + rtc_write(0, DS1511_WD_MSEC); + rtc_write(0, DS1511_WD_SEC); + /* + * start the clock + */ + rtc_enable_update(); + + /* + * check for a dying bat-tree + */ + if (rtc_read(RTC_CMD1) & DS1511_BLF1) { + dev_warn(&pdev->dev, "voltage-low detected.\n"); + } + + /* + * if the platform has an interrupt in mind for this device, + * then by all means, set it + */ + if (pdata->irq >= 0) { + rtc_read(RTC_CMD1); + if (request_irq(pdata->irq, ds1511_interrupt, + IRQF_DISABLED | IRQF_SHARED, pdev->name, pdev) < 0) { + + dev_warn(&pdev->dev, "interrupt not available.\n"); + pdata->irq = -1; + } + } + + rtc = rtc_device_register(pdev->name, &pdev->dev, &ds1511_rtc_ops, + THIS_MODULE); + if (IS_ERR(rtc)) { + ret = PTR_ERR(rtc); + goto out; + } + pdata->rtc = rtc; + platform_set_drvdata(pdev, pdata); + ret = sysfs_create_bin_file(&pdev->dev.kobj, &ds1511_nvram_attr); + if (ret) { + goto out; + } + return 0; + out: + if (pdata->rtc) { + rtc_device_unregister(pdata->rtc); + } + if (pdata->irq >= 0) { + free_irq(pdata->irq, pdev); + } + if (ds1511_base) { + iounmap(ds1511_base); + ds1511_base = NULL; + } + if (pdata->baseaddr) { + release_mem_region(pdata->baseaddr, pdata->size); + } + + kfree(pdata); + return ret; +} + + static int __devexit +ds1511_rtc_remove(struct platform_device *pdev) +{ + struct rtc_plat_data *pdata = platform_get_drvdata(pdev); + + sysfs_remove_bin_file(&pdev->dev.kobj, &ds1511_nvram_attr); + rtc_device_unregister(pdata->rtc); + pdata->rtc = NULL; + if (pdata->irq >= 0) { + /* + * disable the alarm interrupt + */ + rtc_write(rtc_read(RTC_CMD) & ~RTC_TIE, RTC_CMD); + rtc_read(RTC_CMD1); + free_irq(pdata->irq, pdev); + } + iounmap(pdata->ioaddr); + ds1511_base = NULL; + release_mem_region(pdata->baseaddr, pdata->size); + kfree(pdata); + return 0; +} + +static struct platform_driver ds1511_rtc_driver = { + .probe = ds1511_rtc_probe, + .remove = __devexit_p(ds1511_rtc_remove), + .driver = { + .name = "ds1511", + .owner = THIS_MODULE, + }, +}; + + static int __init +ds1511_rtc_init(void) +{ + return platform_driver_register(&ds1511_rtc_driver); +} + + static void __exit +ds1511_rtc_exit(void) +{ + return platform_driver_unregister(&ds1511_rtc_driver); +} + +module_init(ds1511_rtc_init); +module_exit(ds1511_rtc_exit); + +MODULE_AUTHOR("Andrew Sharp <andy.sharp@onstor.com>"); +MODULE_DESCRIPTION("Dallas DS1511 RTC driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/rtc/rtc-pcf8583.c b/drivers/rtc/rtc-pcf8583.c index c973ba9..8b39970 100644 --- a/drivers/rtc/rtc-pcf8583.c +++ b/drivers/rtc/rtc-pcf8583.c @@ -163,27 +163,17 @@ static int pcf8583_read_mem(struct i2c_client *client, struct rtc_mem *mem) static int pcf8583_write_mem(struct i2c_client *client, struct rtc_mem *mem) { - unsigned char addr[1]; - struct i2c_msg msgs[2] = { - { - .addr = client->addr, - .flags = 0, - .len = 1, - .buf = addr, - }, { - .addr = client->addr, - .flags = I2C_M_NOSTART, - .len = mem->nr, - .buf = mem->data, - } - }; + unsigned char buf[9]; + int ret; - if (mem->loc < 8) + if (mem->loc < 8 || mem->nr > 8) return -EINVAL; - addr[0] = mem->loc; + buf[0] = mem->loc; + memcpy(buf + 1, mem->data, mem->nr); - return i2c_transfer(client->adapter, msgs, 2) == 2 ? 0 : -EIO; + ret = i2c_master_send(client, buf, mem->nr + 1); + return ret == mem->nr + 1 ? 0 : -EIO; } static int pcf8583_rtc_read_time(struct device *dev, struct rtc_time *tm) diff --git a/drivers/rtc/rtc-r9701.c b/drivers/rtc/rtc-r9701.c new file mode 100644 index 0000000..a64626a --- /dev/null +++ b/drivers/rtc/rtc-r9701.c @@ -0,0 +1,178 @@ +/* + * Driver for Epson RTC-9701JE + * + * Copyright (C) 2008 Magnus Damm + * + * Based on rtc-max6902.c + * + * Copyright (C) 2006 8D Technologies inc. + * Copyright (C) 2004 Compulab Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/device.h> +#include <linux/init.h> +#include <linux/rtc.h> +#include <linux/spi/spi.h> +#include <linux/bcd.h> +#include <linux/delay.h> +#include <linux/bitops.h> + +#define RSECCNT 0x00 /* Second Counter */ +#define RMINCNT 0x01 /* Minute Counter */ +#define RHRCNT 0x02 /* Hour Counter */ +#define RWKCNT 0x03 /* Week Counter */ +#define RDAYCNT 0x04 /* Day Counter */ +#define RMONCNT 0x05 /* Month Counter */ +#define RYRCNT 0x06 /* Year Counter */ +#define R100CNT 0x07 /* Y100 Counter */ +#define RMINAR 0x08 /* Minute Alarm */ +#define RHRAR 0x09 /* Hour Alarm */ +#define RWKAR 0x0a /* Week/Day Alarm */ +#define RTIMCNT 0x0c /* Interval Timer */ +#define REXT 0x0d /* Extension Register */ +#define RFLAG 0x0e /* RTC Flag Register */ +#define RCR 0x0f /* RTC Control Register */ + +static int write_reg(struct device *dev, int address, unsigned char data) +{ + struct spi_device *spi = to_spi_device(dev); + unsigned char buf[2]; + + buf[0] = address & 0x7f; + buf[1] = data; + + return spi_write(spi, buf, ARRAY_SIZE(buf)); +} + +static int read_regs(struct device *dev, unsigned char *regs, int no_regs) +{ + struct spi_device *spi = to_spi_device(dev); + u8 txbuf[1], rxbuf[1]; + int k, ret; + + ret = 0; + + for (k = 0; ret == 0 && k < no_regs; k++) { + txbuf[0] = 0x80 | regs[k]; + ret = spi_write_then_read(spi, txbuf, 1, rxbuf, 1); + regs[k] = rxbuf[0]; + } + + return ret; +} + +static int r9701_get_datetime(struct device *dev, struct rtc_time *dt) +{ + unsigned long time; + int ret; + unsigned char buf[] = { RSECCNT, RMINCNT, RHRCNT, + RDAYCNT, RMONCNT, RYRCNT }; + + ret = read_regs(dev, buf, ARRAY_SIZE(buf)); + if (ret) + return ret; + + memset(dt, 0, sizeof(*dt)); + + dt->tm_sec = BCD2BIN(buf[0]); /* RSECCNT */ + dt->tm_min = BCD2BIN(buf[1]); /* RMINCNT */ + dt->tm_hour = BCD2BIN(buf[2]); /* RHRCNT */ + + dt->tm_mday = BCD2BIN(buf[3]); /* RDAYCNT */ + dt->tm_mon = BCD2BIN(buf[4]) - 1; /* RMONCNT */ + dt->tm_year = BCD2BIN(buf[5]) + 100; /* RYRCNT */ + + /* the rtc device may contain illegal values on power up + * according to the data sheet. make sure they are valid. + */ + + return rtc_valid_tm(dt); +} + +static int r9701_set_datetime(struct device *dev, struct rtc_time *dt) +{ + int ret, year; + + year = dt->tm_year + 1900; + if (year >= 2100 || year < 2000) + return -EINVAL; + + ret = write_reg(dev, RHRCNT, BIN2BCD(dt->tm_hour)); + ret = ret ? ret : write_reg(dev, RMINCNT, BIN2BCD(dt->tm_min)); + ret = ret ? ret : write_reg(dev, RSECCNT, BIN2BCD(dt->tm_sec)); + ret = ret ? ret : write_reg(dev, RDAYCNT, BIN2BCD(dt->tm_mday)); + ret = ret ? ret : write_reg(dev, RMONCNT, BIN2BCD(dt->tm_mon + 1)); + ret = ret ? ret : write_reg(dev, RYRCNT, BIN2BCD(dt->tm_year - 100)); + ret = ret ? ret : write_reg(dev, RWKCNT, 1 << dt->tm_wday); + + return ret; +} + +static const struct rtc_class_ops r9701_rtc_ops = { + .read_time = r9701_get_datetime, + .set_time = r9701_set_datetime, +}; + +static int __devinit r9701_probe(struct spi_device *spi) +{ + struct rtc_device *rtc; + unsigned char tmp; + int res; + + rtc = rtc_device_register("r9701", + &spi->dev, &r9701_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) + return PTR_ERR(rtc); + + dev_set_drvdata(&spi->dev, rtc); + + tmp = R100CNT; + res = read_regs(&spi->dev, &tmp, 1); + if (res || tmp != 0x20) { + rtc_device_unregister(rtc); + return res; + } + + return 0; +} + +static int __devexit r9701_remove(struct spi_device *spi) +{ + struct rtc_device *rtc = dev_get_drvdata(&spi->dev); + + rtc_device_unregister(rtc); + return 0; +} + +static struct spi_driver r9701_driver = { + .driver = { + .name = "rtc-r9701", + .owner = THIS_MODULE, + }, + .probe = r9701_probe, + .remove = __devexit_p(r9701_remove), +}; + +static __init int r9701_init(void) +{ + return spi_register_driver(&r9701_driver); +} +module_init(r9701_init); + +static __exit void r9701_exit(void) +{ + spi_unregister_driver(&r9701_driver); +} +module_exit(r9701_exit); + +MODULE_DESCRIPTION("r9701 spi RTC driver"); +MODULE_AUTHOR("Magnus Damm <damm@opensource.se>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index e2041b4..86766f1 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -20,6 +20,7 @@ #include <linux/rtc.h> #include <linux/bcd.h> #include <linux/clk.h> +#include <linux/log2.h> #include <asm/hardware.h> #include <asm/uaccess.h> @@ -309,9 +310,7 @@ static int s3c_rtc_ioctl(struct device *dev, break; case RTC_IRQP_SET: - /* check for power of 2 */ - - if ((arg & (arg-1)) != 0 || arg < 1) { + if (!is_power_of_2(arg)) { ret = -EINVAL; goto exit; } diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c index 2eb3852..ee253cc 100644 --- a/drivers/rtc/rtc-sa1100.c +++ b/drivers/rtc/rtc-sa1100.c @@ -357,23 +357,15 @@ static int sa1100_rtc_remove(struct platform_device *pdev) #ifdef CONFIG_PM static int sa1100_rtc_suspend(struct platform_device *pdev, pm_message_t state) { - if (pdev->dev.power.power_state.event != state.event) { - if (state.event == PM_EVENT_SUSPEND && - device_may_wakeup(&pdev->dev)) - enable_irq_wake(IRQ_RTCAlrm); - - pdev->dev.power.power_state = state; - } + if (device_may_wakeup(&pdev->dev)) + enable_irq_wake(IRQ_RTCAlrm); return 0; } static int sa1100_rtc_resume(struct platform_device *pdev) { - if (pdev->dev.power.power_state.event != PM_EVENT_ON) { - if (device_may_wakeup(&pdev->dev)) - disable_irq_wake(IRQ_RTCAlrm); - pdev->dev.power.power_state = PMSG_ON; - } + if (device_may_wakeup(&pdev->dev)) + disable_irq_wake(IRQ_RTCAlrm); return 0; } #else diff --git a/drivers/rtc/rtc-sysfs.c b/drivers/rtc/rtc-sysfs.c index 2ae0e83..4d27ccc 100644 --- a/drivers/rtc/rtc-sysfs.c +++ b/drivers/rtc/rtc-sysfs.c @@ -17,6 +17,13 @@ /* device attributes */ +/* + * NOTE: RTC times displayed in sysfs use the RTC's timezone. That's + * ideally UTC. However, PCs that also boot to MS-Windows normally use + * the local time and change to match daylight savings time. That affects + * attributes including date, time, since_epoch, and wakealarm. + */ + static ssize_t rtc_sysfs_show_name(struct device *dev, struct device_attribute *attr, char *buf) @@ -113,13 +120,13 @@ rtc_sysfs_show_wakealarm(struct device *dev, struct device_attribute *attr, unsigned long alarm; struct rtc_wkalrm alm; - /* Don't show disabled alarms; but the RTC could leave the - * alarm enabled after it's already triggered. Alarms are - * conceptually one-shot, even though some common hardware - * (PCs) doesn't actually work that way. + /* Don't show disabled alarms. For uniformity, RTC alarms are + * conceptually one-shot, even though some common RTCs (on PCs) + * don't actually work that way. * - * REVISIT maybe we should require RTC implementations to - * disable the RTC alarm after it triggers, for uniformity. + * NOTE: RTC implementations where the alarm doesn't match an + * exact YYYY-MM-DD HH:MM[:SS] date *must* disable their RTC + * alarms after they trigger, to ensure one-shot semantics. */ retval = rtc_read_alarm(to_rtc_device(dev), &alm); if (retval == 0 && alm.enabled) { |