aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial/pl2303.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial/pl2303.c')
-rw-r--r--drivers/usb/serial/pl2303.c136
1 files changed, 99 insertions, 37 deletions
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index ec6c132..1128e01 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -94,6 +94,9 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
{ USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
+ { USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
+ { USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
+ { USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
{ } /* Terminating entry */
};
@@ -525,6 +528,12 @@ static void pl2303_set_termios(struct tty_struct *tty,
int baud;
int i;
u8 control;
+ const int baud_sup[] = { 75, 150, 300, 600, 1200, 1800, 2400, 3600,
+ 4800, 7200, 9600, 14400, 19200, 28800, 38400,
+ 57600, 115200, 230400, 460800, 614400,
+ 921600, 1228800, 2457600, 3000000, 6000000 };
+ int baud_floor, baud_ceil;
+ int k;
dbg("%s - port %d", __func__, port->number);
@@ -570,9 +579,39 @@ static void pl2303_set_termios(struct tty_struct *tty,
dbg("%s - data bits = %d", __func__, buf[6]);
}
+ /* For reference buf[0]:buf[3] baud rate value */
+ /* NOTE: Only the values defined in baud_sup are supported !
+ * => if unsupported values are set, the PL2303 seems to use
+ * 9600 baud (at least my PL2303X always does)
+ */
baud = tty_get_baud_rate(tty);
- dbg("%s - baud = %d", __func__, baud);
+ dbg("%s - baud requested = %d", __func__, baud);
if (baud) {
+ /* Set baudrate to nearest supported value */
+ for (k=0; k<ARRAY_SIZE(baud_sup); k++) {
+ if (baud_sup[k] / baud) {
+ baud_ceil = baud_sup[k];
+ if (k==0) {
+ baud = baud_ceil;
+ } else {
+ baud_floor = baud_sup[k-1];
+ if ((baud_ceil % baud)
+ > (baud % baud_floor))
+ baud = baud_floor;
+ else
+ baud = baud_ceil;
+ }
+ break;
+ }
+ }
+ if (baud > 1228800) {
+ /* type_0, type_1 only support up to 1228800 baud */
+ if (priv->type != HX)
+ baud = 1228800;
+ else if (baud > 6000000)
+ baud = 6000000;
+ }
+ dbg("%s - baud set = %d", __func__, baud);
buf[0] = baud & 0xff;
buf[1] = (baud >> 8) & 0xff;
buf[2] = (baud >> 16) & 0xff;
@@ -583,8 +622,16 @@ static void pl2303_set_termios(struct tty_struct *tty,
/* For reference buf[4]=1 is 1.5 stop bits */
/* For reference buf[4]=2 is 2 stop bits */
if (cflag & CSTOPB) {
- buf[4] = 2;
- dbg("%s - stop bits = 2", __func__);
+ /* NOTE: Comply with "real" UARTs / RS232:
+ * use 1.5 instead of 2 stop bits with 5 data bits
+ */
+ if ((cflag & CSIZE) == CS5) {
+ buf[4] = 1;
+ dbg("%s - stop bits = 1.5", __func__);
+ } else {
+ buf[4] = 2;
+ dbg("%s - stop bits = 2", __func__);
+ }
} else {
buf[4] = 0;
dbg("%s - stop bits = 1", __func__);
@@ -597,11 +644,21 @@ static void pl2303_set_termios(struct tty_struct *tty,
/* For reference buf[5]=3 is mark parity */
/* For reference buf[5]=4 is space parity */
if (cflag & PARODD) {
- buf[5] = 1;
- dbg("%s - parity = odd", __func__);
+ if (cflag & CMSPAR) {
+ buf[5] = 3;
+ dbg("%s - parity = mark", __func__);
+ } else {
+ buf[5] = 1;
+ dbg("%s - parity = odd", __func__);
+ }
} else {
- buf[5] = 2;
- dbg("%s - parity = even", __func__);
+ if (cflag & CMSPAR) {
+ buf[5] = 4;
+ dbg("%s - parity = space", __func__);
+ } else {
+ buf[5] = 2;
+ dbg("%s - parity = even", __func__);
+ }
}
} else {
buf[5] = 0;
@@ -645,7 +702,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
pl2303_vendor_write(0x0, 0x0, serial);
}
- /* FIXME: Need to read back resulting baud rate */
+ /* Save resulting baud rate */
if (baud)
tty_encode_baud_rate(tty, baud, baud);
@@ -689,8 +746,7 @@ static void pl2303_close(struct usb_serial_port *port)
}
-static int pl2303_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct ktermios tmp_termios;
struct usb_serial *serial = port->serial;
@@ -712,8 +768,6 @@ static int pl2303_open(struct tty_struct *tty,
if (tty)
pl2303_set_termios(tty, port, &tmp_termios);
- /* FIXME: need to assert RTS and DTR if CRTSCTS off */
-
dbg("%s - submitting read urb", __func__);
port->read_urb->dev = serial->dev;
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
@@ -971,18 +1025,46 @@ exit:
__func__, retval);
}
+static void pl2303_push_data(struct tty_struct *tty,
+ struct usb_serial_port *port, struct urb *urb,
+ u8 line_status)
+{
+ unsigned char *data = urb->transfer_buffer;
+ /* get tty_flag from status */
+ char tty_flag = TTY_NORMAL;
+ /* break takes precedence over parity, */
+ /* which takes precedence over framing errors */
+ if (line_status & UART_BREAK_ERROR)
+ tty_flag = TTY_BREAK;
+ else if (line_status & UART_PARITY_ERROR)
+ tty_flag = TTY_PARITY;
+ else if (line_status & UART_FRAME_ERROR)
+ tty_flag = TTY_FRAME;
+ dbg("%s - tty_flag = %d", __func__, tty_flag);
+
+ tty_buffer_request_room(tty, urb->actual_length + 1);
+ /* overrun is special, not associated with a char */
+ if (line_status & UART_OVERRUN_ERROR)
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ if (port->console && port->sysrq) {
+ int i;
+ for (i = 0; i < urb->actual_length; ++i)
+ if (!usb_serial_handle_sysrq_char(tty, port, data[i]))
+ tty_insert_flip_char(tty, data[i], tty_flag);
+ } else
+ tty_insert_flip_string(tty, data, urb->actual_length);
+ tty_flip_buffer_push(tty);
+}
+
static void pl2303_read_bulk_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
struct pl2303_private *priv = usb_get_serial_port_data(port);
struct tty_struct *tty;
- unsigned char *data = urb->transfer_buffer;
unsigned long flags;
- int i;
int result;
int status = urb->status;
u8 line_status;
- char tty_flag;
dbg("%s - port %d", __func__, port->number);
@@ -1010,10 +1092,7 @@ static void pl2303_read_bulk_callback(struct urb *urb)
}
usb_serial_debug_data(debug, &port->dev, __func__,
- urb->actual_length, data);
-
- /* get tty_flag from status */
- tty_flag = TTY_NORMAL;
+ urb->actual_length, urb->transfer_buffer);
spin_lock_irqsave(&priv->lock, flags);
line_status = priv->line_status;
@@ -1021,26 +1100,9 @@ static void pl2303_read_bulk_callback(struct urb *urb)
spin_unlock_irqrestore(&priv->lock, flags);
wake_up_interruptible(&priv->delta_msr_wait);
- /* break takes precedence over parity, */
- /* which takes precedence over framing errors */
- if (line_status & UART_BREAK_ERROR)
- tty_flag = TTY_BREAK;
- else if (line_status & UART_PARITY_ERROR)
- tty_flag = TTY_PARITY;
- else if (line_status & UART_FRAME_ERROR)
- tty_flag = TTY_FRAME;
- dbg("%s - tty_flag = %d", __func__, tty_flag);
-
tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
- tty_buffer_request_room(tty, urb->actual_length + 1);
- /* overrun is special, not associated with a char */
- if (line_status & UART_OVERRUN_ERROR)
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- for (i = 0; i < urb->actual_length; ++i)
- if (!usb_serial_handle_sysrq_char(port, data[i]))
- tty_insert_flip_char(tty, data[i], tty_flag);
- tty_flip_buffer_push(tty);
+ pl2303_push_data(tty, port, urb, line_status);
}
tty_kref_put(tty);
/* Schedule the next read _if_ we are still open */
generated by cgit v1.1 at 2025-08-17 07:50:28 +0000