diff options
Diffstat (limited to 'include/asm-mn10300/uaccess.h')
| -rw-r--r-- | include/asm-mn10300/uaccess.h | 490 |
1 files changed, 0 insertions, 490 deletions
diff --git a/include/asm-mn10300/uaccess.h b/include/asm-mn10300/uaccess.h deleted file mode 100644 index 8a3a4dd..0000000 --- a/include/asm-mn10300/uaccess.h +++ /dev/null @@ -1,490 +0,0 @@ -/* MN10300 userspace access functions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_UACCESS_H -#define _ASM_UACCESS_H - -/* - * User space memory access functions - */ -#include <linux/sched.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/errno.h> - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons, these macros are grossly misnamed. - */ - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - -#define KERNEL_XDS MAKE_MM_SEG(0xBFFFFFFF) -#define KERNEL_DS MAKE_MM_SEG(0x9FFFFFFF) -#define USER_DS MAKE_MM_SEG(TASK_SIZE) - -#define get_ds() (KERNEL_DS) -#define get_fs() (current_thread_info()->addr_limit) -#define set_fs(x) (current_thread_info()->addr_limit = (x)) -#define __kernel_ds_p() (current_thread_info()->addr_limit.seg == 0x9FFFFFFF) - -#define segment_eq(a, b) ((a).seg == (b).seg) - -#define __addr_ok(addr) \ - ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg)) - -/* - * check that a range of addresses falls within the current address limit - */ -static inline int ___range_ok(unsigned long addr, unsigned int size) -{ - int flag = 1, tmp; - - asm(" add %3,%1 \n" /* set C-flag if addr + size > 4Gb */ - " bcs 0f \n" - " cmp %4,%1 \n" /* jump if addr+size>limit (error) */ - " bhi 0f \n" - " clr %0 \n" /* mark okay */ - "0: \n" - : "=r"(flag), "=&r"(tmp) - : "1"(addr), "ir"(size), - "r"(current_thread_info()->addr_limit.seg), "0"(flag) - : "cc" - ); - - return flag; -} - -#define __range_ok(addr, size) ___range_ok((unsigned long)(addr), (u32)(size)) - -#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0) -#define __access_ok(addr, size) (__range_ok((addr), (size)) == 0) - -static inline int verify_area(int type, const void *addr, unsigned long size) -{ - return access_ok(type, addr, size) ? 0 : -EFAULT; -} - - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -/* Returns 0 if exception not found and fixup otherwise. */ -extern int fixup_exception(struct pt_regs *regs); - -#define put_user(x, ptr) __put_user_check((x), (ptr), sizeof(*(ptr))) -#define get_user(x, ptr) __get_user_check((x), (ptr), sizeof(*(ptr))) - -/* - * The "__xxx" versions do not do address space checking, useful when - * doing multiple accesses to the same area (the user has to do the - * checks by hand with "access_ok()") - */ -#define __put_user(x, ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr))) -#define __get_user(x, ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr))) - -/* - * The "xxx_ret" versions return constant specified in third argument, if - * something bad happens. These macros can be optimized for the - * case of just returning from the function xxx_ret is used. - */ - -#define put_user_ret(x, ptr, ret) \ - ({ if (put_user((x), (ptr))) return (ret); }) -#define get_user_ret(x, ptr, ret) \ - ({ if (get_user((x), (ptr))) return (ret); }) -#define __put_user_ret(x, ptr, ret) \ - ({ if (__put_user((x), (ptr))) return (ret); }) -#define __get_user_ret(x, ptr, ret) \ - ({ if (__get_user((x), (ptr))) return (ret); }) - -struct __large_struct { unsigned long buf[100]; }; -#define __m(x) (*(struct __large_struct *)(x)) - -#define __get_user_nocheck(x, ptr, size) \ -({ \ - __typeof(*(ptr)) __gu_val; \ - unsigned long __gu_addr; \ - int __gu_err; \ - __gu_addr = (unsigned long) (ptr); \ - switch (size) { \ - case 1: __get_user_asm("bu"); break; \ - case 2: __get_user_asm("hu"); break; \ - case 4: __get_user_asm("" ); break; \ - default: __get_user_unknown(); break; \ - } \ - x = (__typeof__(*(ptr))) __gu_val; \ - __gu_err; \ -}) - -#define __get_user_check(x, ptr, size) \ -({ \ - __typeof__(*(ptr)) __gu_val; \ - unsigned long __gu_addr; \ - int __gu_err; \ - __gu_addr = (unsigned long) (ptr); \ - if (likely(__access_ok(__gu_addr,size))) { \ - switch (size) { \ - case 1: __get_user_asm("bu"); break; \ - case 2: __get_user_asm("hu"); break; \ - case 4: __get_user_asm("" ); break; \ - default: __get_user_unknown(); break; \ - } \ - } \ - else { \ - __gu_err = -EFAULT; \ - __gu_val = 0; \ - } \ - x = (__typeof__(*(ptr))) __gu_val; \ - __gu_err; \ -}) - -#define __get_user_asm(INSN) \ -({ \ - asm volatile( \ - "1:\n" \ - " mov"INSN" %2,%1\n" \ - " mov 0,%0\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - "3:\n\t" \ - " mov %3,%0\n" \ - " jmp 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 1b, 3b\n" \ - " .previous" \ - : "=&r" (__gu_err), "=&r" (__gu_val) \ - : "m" (__m(__gu_addr)), "i" (-EFAULT)); \ -}) - -extern int __get_user_unknown(void); - -#define __put_user_nocheck(x, ptr, size) \ -({ \ - union { \ - __typeof__(*(ptr)) val; \ - u32 bits[2]; \ - } __pu_val; \ - unsigned long __pu_addr; \ - int __pu_err; \ - __pu_val.val = (x); \ - __pu_addr = (unsigned long) (ptr); \ - switch (size) { \ - case 1: __put_user_asm("bu"); break; \ - case 2: __put_user_asm("hu"); break; \ - case 4: __put_user_asm("" ); break; \ - case 8: __put_user_asm8(); break; \ - default: __pu_err = __put_user_unknown(); break; \ - } \ - __pu_err; \ -}) - -#define __put_user_check(x, ptr, size) \ -({ \ - union { \ - __typeof__(*(ptr)) val; \ - u32 bits[2]; \ - } __pu_val; \ - unsigned long __pu_addr; \ - int __pu_err; \ - __pu_val.val = (x); \ - __pu_addr = (unsigned long) (ptr); \ - if (likely(__access_ok(__pu_addr, size))) { \ - switch (size) { \ - case 1: __put_user_asm("bu"); break; \ - case 2: __put_user_asm("hu"); break; \ - case 4: __put_user_asm("" ); break; \ - case 8: __put_user_asm8(); break; \ - default: __pu_err = __put_user_unknown(); break; \ - } \ - } \ - else { \ - __pu_err = -EFAULT; \ - } \ - __pu_err; \ -}) - -#define __put_user_asm(INSN) \ -({ \ - asm volatile( \ - "1:\n" \ - " mov"INSN" %1,%2\n" \ - " mov 0,%0\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - "3:\n" \ - " mov %3,%0\n" \ - " jmp 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 1b, 3b\n" \ - " .previous" \ - : "=&r" (__pu_err) \ - : "r" (__pu_val.val), "m" (__m(__pu_addr)), \ - "i" (-EFAULT) \ - ); \ -}) - -#define __put_user_asm8() \ -({ \ - asm volatile( \ - "1: mov %1,%3 \n" \ - "2: mov %2,%4 \n" \ - " mov 0,%0 \n" \ - "3: \n" \ - " .section .fixup,\"ax\" \n" \ - "4: \n" \ - " mov %5,%0 \n" \ - " jmp 3b \n" \ - " .previous \n" \ - " .section __ex_table,\"a\"\n" \ - " .balign 4 \n" \ - " .long 1b, 4b \n" \ - " .long 2b, 4b \n" \ - " .previous \n" \ - : "=&r" (__pu_err) \ - : "r" (__pu_val.bits[0]), "r" (__pu_val.bits[1]), \ - "m" (__m(__pu_addr)), "m" (__m(__pu_addr+4)), \ - "i" (-EFAULT) \ - ); \ -}) - -extern int __put_user_unknown(void); - - -/* - * Copy To/From Userspace - */ -/* Generic arbitrary sized copy. */ -#define __copy_user(to, from, size) \ -do { \ - if (size) { \ - void *__to = to; \ - const void *__from = from; \ - int w; \ - asm volatile( \ - "0: movbu (%0),%3;\n" \ - "1: movbu %3,(%1);\n" \ - " inc %0;\n" \ - " inc %1;\n" \ - " add -1,%2;\n" \ - " bne 0b;\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - "3: jmp 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 0b,3b\n" \ - " .long 1b,3b\n" \ - " .previous\n" \ - : "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\ - : "0"(__from), "1"(__to), "2"(size) \ - : "memory"); \ - } \ -} while (0) - -#define __copy_user_zeroing(to, from, size) \ -do { \ - if (size) { \ - void *__to = to; \ - const void *__from = from; \ - int w; \ - asm volatile( \ - "0: movbu (%0),%3;\n" \ - "1: movbu %3,(%1);\n" \ - " inc %0;\n" \ - " inc %1;\n" \ - " add -1,%2;\n" \ - " bne 0b;\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - "3:\n" \ - " mov %2,%0\n" \ - " clr %3\n" \ - "4: movbu %3,(%1);\n" \ - " inc %1;\n" \ - " add -1,%2;\n" \ - " bne 4b;\n" \ - " mov %0,%2\n" \ - " jmp 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 0b,3b\n" \ - " .long 1b,3b\n" \ - " .previous\n" \ - : "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\ - : "0"(__from), "1"(__to), "2"(size) \ - : "memory"); \ - } \ -} while (0) - -/* We let the __ versions of copy_from/to_user inline, because they're often - * used in fast paths and have only a small space overhead. - */ -static inline -unsigned long __generic_copy_from_user_nocheck(void *to, const void *from, - unsigned long n) -{ - __copy_user_zeroing(to, from, n); - return n; -} - -static inline -unsigned long __generic_copy_to_user_nocheck(void *to, const void *from, - unsigned long n) -{ - __copy_user(to, from, n); - return n; -} - - -#if 0 -#error don't use - these macros don't increment to & from pointers -/* Optimize just a little bit when we know the size of the move. */ -#define __constant_copy_user(to, from, size) \ -do { \ - asm volatile( \ - " mov %0,a0;\n" \ - "0: movbu (%1),d3;\n" \ - "1: movbu d3,(%2);\n" \ - " add -1,a0;\n" \ - " bne 0b;\n" \ - "2:;" \ - ".section .fixup,\"ax\"\n" \ - "3: jmp 2b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 0b,3b\n" \ - " .long 1b,3b\n" \ - ".previous" \ - : \ - : "d"(size), "d"(to), "d"(from) \ - : "d3", "a0"); \ -} while (0) - -/* Optimize just a little bit when we know the size of the move. */ -#define __constant_copy_user_zeroing(to, from, size) \ -do { \ - asm volatile( \ - " mov %0,a0;\n" \ - "0: movbu (%1),d3;\n" \ - "1: movbu d3,(%2);\n" \ - " add -1,a0;\n" \ - " bne 0b;\n" \ - "2:;" \ - ".section .fixup,\"ax\"\n" \ - "3: jmp 2b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .balign 4\n" \ - " .long 0b,3b\n" \ - " .long 1b,3b\n" \ - ".previous" \ - : \ - : "d"(size), "d"(to), "d"(from) \ - : "d3", "a0"); \ -} while (0) - -static inline -unsigned long __constant_copy_to_user(void *to, const void *from, - unsigned long n) -{ - if (access_ok(VERIFY_WRITE, to, n)) - __constant_copy_user(to, from, n); - return n; -} - -static inline -unsigned long __constant_copy_from_user(void *to, const void *from, - unsigned long n) -{ - if (access_ok(VERIFY_READ, from, n)) - __constant_copy_user_zeroing(to, from, n); - return n; -} - -static inline -unsigned long __constant_copy_to_user_nocheck(void *to, const void *from, - unsigned long n) -{ - __constant_copy_user(to, from, n); - return n; -} - -static inline -unsigned long __constant_copy_from_user_nocheck(void *to, const void *from, - unsigned long n) -{ - __constant_copy_user_zeroing(to, from, n); - return n; -} -#endif - -extern unsigned long __generic_copy_to_user(void __user *, const void *, - unsigned long); -extern unsigned long __generic_copy_from_user(void *, const void __user *, - unsigned long); - -#define __copy_to_user_inatomic(to, from, n) \ - __generic_copy_to_user_nocheck((to), (from), (n)) -#define __copy_from_user_inatomic(to, from, n) \ - __generic_copy_from_user_nocheck((to), (from), (n)) - -#define __copy_to_user(to, from, n) \ -({ \ - might_sleep(); \ - __copy_to_user_inatomic((to), (from), (n)); \ -}) - -#define __copy_from_user(to, from, n) \ -({ \ - might_sleep(); \ - __copy_from_user_inatomic((to), (from), (n)); \ -}) - - -#define copy_to_user(to, from, n) __generic_copy_to_user((to), (from), (n)) -#define copy_from_user(to, from, n) __generic_copy_from_user((to), (from), (n)) - -extern long strncpy_from_user(char *dst, const char __user *src, long count); -extern long __strncpy_from_user(char *dst, const char __user *src, long count); -extern long strnlen_user(const char __user *str, long n); -#define strlen_user(str) strnlen_user(str, ~0UL >> 1) -extern unsigned long clear_user(void __user *mem, unsigned long len); -extern unsigned long __clear_user(void __user *mem, unsigned long len); - -#endif /* _ASM_UACCESS_H */ |