diff options
Diffstat (limited to 'include')
78 files changed, 510 insertions, 886 deletions
diff --git a/include/asm-alpha/types.h b/include/asm-alpha/types.h index a9e34ca..c154135 100644 --- a/include/asm-alpha/types.h +++ b/include/asm-alpha/types.h @@ -23,5 +23,11 @@ typedef unsigned int umode_t; #define BITS_PER_LONG 64 +#ifndef __ASSEMBLY__ + +typedef u64 dma_addr_t; +typedef u64 dma64_addr_t; + +#endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ #endif /* _ALPHA_TYPES_H */ diff --git a/include/asm-arm/arch-pxa/pm.h b/include/asm-arm/arch-pxa/pm.h index 9d9f4b5..261e5bc 100644 --- a/include/asm-arm/arch-pxa/pm.h +++ b/include/asm-arm/arch-pxa/pm.h @@ -10,7 +10,7 @@ #include <linux/suspend.h> struct pxa_cpu_pm_fns { - int save_size; + int save_count; void (*save)(unsigned long *); void (*restore)(unsigned long *); int (*valid)(suspend_state_t state); diff --git a/include/asm-arm/arch-pxa/system.h b/include/asm-arm/arch-pxa/system.h index a758a71..9aa6c2e 100644 --- a/include/asm-arm/arch-pxa/system.h +++ b/include/asm-arm/arch-pxa/system.h @@ -22,7 +22,8 @@ static inline void arch_idle(void) static inline void arch_reset(char mode) { - RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; + if (cpu_is_pxa2xx()) + RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; if (mode == 's') { /* Jump into ROM at address 0 */ diff --git a/include/asm-blackfin/dpmc.h b/include/asm-blackfin/dpmc.h index 686cf83..7f34cd3 100644 --- a/include/asm-blackfin/dpmc.h +++ b/include/asm-blackfin/dpmc.h @@ -1,7 +1,7 @@ /* * include/asm-blackfin/dpmc.h - Miscellaneous IOCTL commands for Dynamic Power * Management Controller Driver. - * Copyright (C) 2004 Analog Device Inc. + * Copyright (C) 2004-2008 Analog Device Inc. * */ #ifndef _BLACKFIN_DPMC_H_ @@ -65,6 +65,14 @@ void disable_wdog_timer(void); extern unsigned long get_cclk(void); extern unsigned long get_sclk(void); +struct bfin_dpmc_platform_data { + const unsigned int *tuple_tab; + unsigned short tabsize; + unsigned short vr_settling_time; /* in us */ +}; + +#define VRPAIR(vlev, freq) (((vlev) << 16) | ((freq) >> 16)) + #endif /* __KERNEL__ */ #endif /*_BLACKFIN_DPMC_H_*/ diff --git a/include/asm-blackfin/entry.h b/include/asm-blackfin/entry.h index 562c6d3..c4f721e 100644 --- a/include/asm-blackfin/entry.h +++ b/include/asm-blackfin/entry.h @@ -17,6 +17,11 @@ #define PF_DTRACE_OFF 1 #define PF_DTRACE_BIT 5 +/* + * NOTE! The single-stepping code assumes that all interrupt handlers + * start by saving SYSCFG on the stack with their first instruction. + */ + /* This one is used for exceptions, emulation, and NMI. It doesn't push RETI and doesn't do cli. */ #define SAVE_ALL_SYS save_context_no_interrupts diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h index f0ab273..26e3c80 100644 --- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h @@ -44,10 +44,15 @@ #define UART_PUT_CHAR(uart, v) bfin_write16(((uart)->port.membase + OFFSET_THR), v) #define UART_PUT_DLL(uart, v) bfin_write16(((uart)->port.membase + OFFSET_DLL), v) #define UART_PUT_IER(uart, v) bfin_write16(((uart)->port.membase + OFFSET_IER), v) +#define UART_SET_IER(uart, v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v)) +#define UART_CLEAR_IER(uart, v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v)) #define UART_PUT_DLH(uart, v) bfin_write16(((uart)->port.membase + OFFSET_DLH), v) #define UART_PUT_LCR(uart, v) bfin_write16(((uart)->port.membase + OFFSET_LCR), v) #define UART_PUT_GCTL(uart, v) bfin_write16(((uart)->port.membase + OFFSET_GCTL), v) +#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) +#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) + #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) # define CONFIG_SERIAL_BFIN_CTSRTS diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h index fbe88de..d016603 100644 --- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h @@ -44,10 +44,15 @@ #define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) #define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v) #define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v) +#define UART_SET_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v)) +#define UART_CLEAR_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v)) #define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v) #define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v) #define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) +#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) +#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) + #ifdef CONFIG_BFIN_UART0_CTSRTS # define CONFIG_SERIAL_BFIN_CTSRTS # ifndef CONFIG_UART0_CTS_PIN diff --git a/include/asm-blackfin/mach-bf533/defBF532.h b/include/asm-blackfin/mach-bf533/defBF532.h index 17e1548..0ab4dd7 100644 --- a/include/asm-blackfin/mach-bf533/defBF532.h +++ b/include/asm-blackfin/mach-bf533/defBF532.h @@ -468,6 +468,8 @@ #define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ #define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ #define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ +#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ +#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ #define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ #define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */ diff --git a/include/asm-blackfin/mach-bf533/irq.h b/include/asm-blackfin/mach-bf533/irq.h index 832e6f6..5aa38e5 100644 --- a/include/asm-blackfin/mach-bf533/irq.h +++ b/include/asm-blackfin/mach-bf533/irq.h @@ -66,12 +66,13 @@ Core Emulation ** DMA8/9 Interrupt IVG13 28 DMA10/11 Interrupt IVG13 29 Watchdog Timer IVG13 30 - Software Interrupt 1 IVG14 31 - Software Interrupt 2 -- + + Softirq IVG14 31 + System Call -- (lowest priority) IVG15 32 * */ -#define SYS_IRQS 32 -#define NR_PERI_INTS 24 +#define SYS_IRQS 31 +#define NR_PERI_INTS 24 /* The ABSTRACT IRQ definitions */ /** the first seven of the following are fixed, the rest you change if you need to **/ @@ -96,7 +97,7 @@ Core Emulation ** #define IRQ_SPORT0_TX 17 /*DMA2 Interrupt (SPORT0 TX) */ #define IRQ_SPORT1_RX 18 /*DMA3 Interrupt (SPORT1 RX) */ #define IRQ_SPORT1_TX 19 /*DMA4 Interrupt (SPORT1 TX) */ -#define IRQ_SPI 20 /*DMA5 Interrupt (SPI) */ +#define IRQ_SPI 20 /*DMA5 Interrupt (SPI) */ #define IRQ_UART_RX 21 /*DMA6 Interrupt (UART RX) */ #define IRQ_UART_TX 22 /*DMA7 Interrupt (UART TX) */ #define IRQ_TMR0 23 /*Timer 0 */ @@ -108,9 +109,6 @@ Core Emulation ** #define IRQ_MEM_DMA1 29 /*DMA10/11 Interrupt (Memory DMA Stream 1) */ #define IRQ_WATCH 30 /*Watch Dog Timer */ -#define IRQ_SW_INT1 31 /*Software Int 1 */ -#define IRQ_SW_INT2 32 /*Software Int 2 (reserved for SYSCALL) */ - #define IRQ_PF0 33 #define IRQ_PF1 34 #define IRQ_PF2 35 diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h index fd100a4..f79d1a0 100644 --- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h @@ -44,10 +44,15 @@ #define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) #define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v) #define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v) +#define UART_SET_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v)) +#define UART_CLEAR_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v)) #define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v) #define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v) #define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) +#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) +#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) + #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) # define CONFIG_SERIAL_BFIN_CTSRTS diff --git a/include/asm-blackfin/mach-bf537/irq.h b/include/asm-blackfin/mach-bf537/irq.h index be6f2ff..2e68a8a 100644 --- a/include/asm-blackfin/mach-bf537/irq.h +++ b/include/asm-blackfin/mach-bf537/irq.h @@ -34,24 +34,23 @@ /* * Interrupt source definitions - Event Source Core Event Name -Core Emulation ** - Events (highest priority) EMU 0 - Reset RST 1 - NMI NMI 2 - Exception EVX 3 - Reserved -- 4 - Hardware Error IVHW 5 - Core Timer IVTMR 6 * - -..... - - Software Interrupt 1 IVG14 31 - Software Interrupt 2 -- - (lowest priority) IVG15 32 * + * Event Source Core Event Name + * Core Emulation ** + * Events (highest priority) EMU 0 + * Reset RST 1 + * NMI NMI 2 + * Exception EVX 3 + * Reserved -- 4 + * Hardware Error IVHW 5 + * Core Timer IVTMR 6 + * ..... + * + * Softirq IVG14 + * System Call -- + * (lowest priority) IVG15 */ -#define SYS_IRQS 41 +#define SYS_IRQS 39 #define NR_PERI_INTS 32 /* The ABSTRACT IRQ definitions */ @@ -95,10 +94,8 @@ Core Emulation ** #define IRQ_PORTG_INTB 35 /* PF Port G (PF15:0) Interrupt B */ #define IRQ_MEM_DMA0 36 /*(Memory DMA Stream 0) */ #define IRQ_MEM_DMA1 37 /*(Memory DMA Stream 1) */ -#define IRQ_PROG_INTB 38 /* PF Ports F (PF15:0) Interrupt B */ +#define IRQ_PROG_INTB 38 /* PF Ports F (PF15:0) Interrupt B */ #define IRQ_WATCH 38 /*Watch Dog Timer */ -#define IRQ_SW_INT1 40 /*Software Int 1 */ -#define IRQ_SW_INT2 41 /*Software Int 2 (reserved for SYSCALL) */ #define IRQ_PPI_ERROR 42 /*PPI Error Interrupt */ #define IRQ_CAN_ERROR 43 /*CAN Error Interrupt */ diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h index 6547027..5eb46a7 100644 --- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h @@ -54,6 +54,9 @@ #define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) #define UART_PUT_MCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_MCR),v) +#define UART_SET_DLAB(uart) /* MMRs not muxed on BF54x */ +#define UART_CLEAR_DLAB(uart) /* MMRs not muxed on BF54x */ + #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) # define CONFIG_SERIAL_BFIN_CTSRTS diff --git a/include/asm-blackfin/mach-bf548/defBF54x_base.h b/include/asm-blackfin/mach-bf548/defBF54x_base.h index 08f90c2..e022e89 100644 --- a/include/asm-blackfin/mach-bf548/defBF54x_base.h +++ b/include/asm-blackfin/mach-bf548/defBF54x_base.h @@ -2329,6 +2329,26 @@ #define KPADWE 0x1000 /* Keypad Wake-Up Enable */ #define ROTWE 0x2000 /* Rotary Wake-Up Enable */ +#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ +#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ +#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ + +#define GAIN_5 0x0000 /* GAIN = 5*/ +#define GAIN_10 0x0004 /* GAIN = 1*/ +#define GAIN_20 0x0008 /* GAIN = 2*/ +#define GAIN_50 0x000C /* GAIN = 5*/ + +#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ +#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ +#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ +#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ +#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ +#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ +#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ +#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ +#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ +#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ + /* Bit masks for NFC_CTL */ #define WR_DLY 0xf /* Write Strobe Delay */ diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h index 8a4e66d..7a96287 100644 --- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h @@ -44,10 +44,15 @@ #define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) #define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v) #define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v) +#define UART_SET_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v)) +#define UART_CLEAR_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v)) #define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v) #define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v) #define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) +#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) +#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) + #ifdef CONFIG_BFIN_UART0_CTSRTS # define CONFIG_SERIAL_BFIN_CTSRTS # ifndef CONFIG_UART0_CTS_PIN diff --git a/include/asm-blackfin/mach-bf561/defBF561.h b/include/asm-blackfin/mach-bf561/defBF561.h index 366c9b9..1ab50e9 100644 --- a/include/asm-blackfin/mach-bf561/defBF561.h +++ b/include/asm-blackfin/mach-bf561/defBF561.h @@ -868,6 +868,34 @@ #define CHIPID_FAMILY 0x0FFFF000 #define CHIPID_MANUFACTURE 0x00000FFE +/* VR_CTL Masks */ +#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ +#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ +#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ +#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ +#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ + +#define GAIN 0x000C /* Voltage Level Gain */ +#define GAIN_5 0x0000 /* GAIN = 5*/ +#define GAIN_10 0x0004 /* GAIN = 1*/ +#define GAIN_20 0x0008 /* GAIN = 2*/ +#define GAIN_50 0x000C /* GAIN = 5*/ + +#define VLEV 0x00F0 /* Internal Voltage Level */ +#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ +#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ +#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ +#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ +#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ +#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ +#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ +#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ +#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ +#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ + +#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ +#define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */ + /* PLL_DIV Masks */ #define SCLK_DIV(x) (x) /* SCLK = VCO / x */ diff --git a/include/asm-blackfin/mach-bf561/irq.h b/include/asm-blackfin/mach-bf561/irq.h index 83f0383..6698389 100644 --- a/include/asm-blackfin/mach-bf561/irq.h +++ b/include/asm-blackfin/mach-bf561/irq.h @@ -118,12 +118,13 @@ Supplemental interrupt 0 IVG7 69 supplemental interrupt 1 IVG7 70 - Software Interrupt 1 IVG14 71 - Software Interrupt 2 IVG15 72 * - (lowest priority) + Softirq IVG14 + System Call -- + (lowest priority) IVG15 + **********************************************************************/ -#define SYS_IRQS 72 +#define SYS_IRQS 71 #define NR_PERI_INTS 64 /* @@ -237,9 +238,7 @@ #define IRQ_RESERVED_2 (IVG_BASE + 61) /* Reserved interrupt */ #define IRQ_SUPPLE_0 (IVG_BASE + 62) /* Supplemental interrupt 0 */ #define IRQ_SUPPLE_1 (IVG_BASE + 63) /* supplemental interrupt 1 */ -#define IRQ_SW_INT1 71 /* Software Interrupt 1 */ -#define IRQ_SW_INT2 72 /* Software Interrupt 2 */ - /* reserved for SYSCALL */ + #define IRQ_PF0 73 #define IRQ_PF1 74 #define IRQ_PF2 75 diff --git a/include/asm-blackfin/mach-common/context.S b/include/asm-blackfin/mach-common/context.S index fd0ebe1..c0e630e 100644 --- a/include/asm-blackfin/mach-common/context.S +++ b/include/asm-blackfin/mach-common/context.S @@ -28,6 +28,11 @@ */ /* + * NOTE! The single-stepping code assumes that all interrupt handlers + * start by saving SYSCFG on the stack with their first instruction. + */ + +/* * Code to save processor context. * We even save the register which are preserved by a function call * - r4, r5, r6, r7, p3, p4, p5 diff --git a/include/asm-blackfin/time.h b/include/asm-blackfin/time.h index 6e5859b..ddc43ce 100644 --- a/include/asm-blackfin/time.h +++ b/include/asm-blackfin/time.h @@ -24,6 +24,8 @@ #ifndef CONFIG_CPU_FREQ #define TIME_SCALE 1 +#define __bfin_cycles_off (0) +#define __bfin_cycles_mod (0) #else /* * Blackfin CPU frequency scaling supports max Core Clock 1, 1/2 and 1/4 . @@ -31,6 +33,8 @@ * adjust the Core Timer Presale Register. This way we don't lose time. */ #define TIME_SCALE 4 +extern unsigned long long __bfin_cycles_off; +extern unsigned int __bfin_cycles_mod; #endif #endif diff --git a/include/asm-m68k/machw.h b/include/asm-m68k/machw.h index d2e0e25..3562499 100644 --- a/include/asm-m68k/machw.h +++ b/include/asm-m68k/machw.h @@ -66,36 +66,6 @@ struct MAC_SCC # define mac_scc ((*(volatile struct SCC*)MAC_SCC_BAS)) #endif -/* hardware stuff */ - -#define MACHW_DECLARE(name) unsigned name : 1 -#define MACHW_SET(name) (mac_hw_present.name = 1) -#define MACHW_PRESENT(name) (mac_hw_present.name) - -struct mac_hw_present { - /* video hardware */ - /* sound hardware */ - /* disk storage interfaces */ - MACHW_DECLARE(MAC_SCSI_80); /* Directly mapped NCR5380 */ - MACHW_DECLARE(MAC_SCSI_96); /* 53c9[46] */ - MACHW_DECLARE(MAC_SCSI_96_2); /* 2nd 53c9[46] Q900 and Q950 */ - MACHW_DECLARE(IDE); /* IDE Interface */ - /* other I/O hardware */ - MACHW_DECLARE(SCC); /* Serial Communications Contr. */ - /* DMA */ - MACHW_DECLARE(SCSI_DMA); /* DMA for the NCR5380 */ - /* real time clocks */ - MACHW_DECLARE(RTC_CLK); /* clock chip */ - /* supporting hardware */ - MACHW_DECLARE(VIA1); /* Versatile Interface Ad. 1 */ - MACHW_DECLARE(VIA2); /* Versatile Interface Ad. 2 */ - MACHW_DECLARE(RBV); /* Versatile Interface Ad. 2+ */ - /* NUBUS */ - MACHW_DECLARE(NUBUS); /* NUBUS */ -}; - -extern struct mac_hw_present mac_hw_present; - #endif /* __ASSEMBLY__ */ #endif /* linux/machw.h */ diff --git a/include/asm-mips/types.h b/include/asm-mips/types.h index 7a2ee4f..bcbb8d6 100644 --- a/include/asm-mips/types.h +++ b/include/asm-mips/types.h @@ -19,8 +19,6 @@ typedef unsigned short umode_t; -#endif - #endif /* __ASSEMBLY__ */ /* diff --git a/include/asm-mn10300/processor.h b/include/asm-mn10300/processor.h index f1b081f..7323927 100644 --- a/include/asm-mn10300/processor.h +++ b/include/asm-mn10300/processor.h @@ -58,7 +58,7 @@ extern struct mn10300_cpuinfo boot_cpu_data; extern void identify_cpu(struct mn10300_cpuinfo *); extern void print_cpu_info(struct mn10300_cpuinfo *); extern void dodgy_tsc(void); -#define cpu_relax() do {} while (0) +#define cpu_relax() barrier() /* * User space process size: 1.75GB (default). diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h index afae069..e0062d7 100644 --- a/include/asm-powerpc/io.h +++ b/include/asm-powerpc/io.h @@ -2,7 +2,7 @@ #define _ASM_POWERPC_IO_H #ifdef __KERNEL__ -/* +/* * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version @@ -18,6 +18,9 @@ extern int check_legacy_ioport(unsigned long base_port); #define _PNPWRP 0xa79 #define PNPBIOS_BASE 0xf000 +#include <linux/device.h> +#include <linux/io.h> + #include <linux/compiler.h> #include <asm/page.h> #include <asm/byteorder.h> @@ -744,6 +747,9 @@ static inline void * bus_to_virt(unsigned long address) #define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set) +void __iomem *devm_ioremap_prot(struct device *dev, resource_size_t offset, + size_t size, unsigned long flags); + #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_IO_H */ diff --git a/include/asm-powerpc/kvm_host.h b/include/asm-powerpc/kvm_host.h index 04ffbb8..81a69d7 100644 --- a/include/asm-powerpc/kvm_host.h +++ b/include/asm-powerpc/kvm_host.h @@ -59,6 +59,7 @@ struct kvm_vcpu_stat { u32 emulated_inst_exits; u32 dec_exits; u32 ext_intr_exits; + u32 halt_wakeup; }; struct tlbe { diff --git a/include/asm-powerpc/kvm_ppc.h b/include/asm-powerpc/kvm_ppc.h index 7ac8203..b35a7e3 100644 --- a/include/asm-powerpc/kvm_ppc.h +++ b/include/asm-powerpc/kvm_ppc.h @@ -77,12 +77,17 @@ static inline void kvmppc_clear_exception(struct kvm_vcpu *vcpu, int exception) clear_bit(priority, &vcpu->arch.pending_exceptions); } +/* Helper function for "full" MSR writes. No need to call this if only EE is + * changing. */ static inline void kvmppc_set_msr(struct kvm_vcpu *vcpu, u32 new_msr) { if ((new_msr & MSR_PR) != (vcpu->arch.msr & MSR_PR)) kvmppc_mmu_priv_switch(vcpu, new_msr & MSR_PR); vcpu->arch.msr = new_msr; + + if (vcpu->arch.msr & MSR_WE) + kvm_vcpu_block(vcpu); } #endif /* __POWERPC_KVM_PPC_H__ */ diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h index 7c97b5a..c08e714 100644 --- a/include/asm-powerpc/pgtable-ppc32.h +++ b/include/asm-powerpc/pgtable-ppc32.h @@ -209,6 +209,13 @@ extern int icache_44x_need_flush; * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 * - - - - - - U0 U1 U2 U3 W I M G E - UX UW UR SX SW SR * + * Newer 440 cores (440x6 as used on AMCC 460EX/460GT) have additional + * TLB2 storage attibute fields. Those are: + * + * TLB2: + * 0...10 11 12 13 14 15 16...31 + * no change WL1 IL1I IL1D IL2I IL2D no change + * * There are some constrains and options, to decide mapping software bits * into TLB entry. * diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h index e3c845b..6abead6 100644 --- a/include/asm-powerpc/spu.h +++ b/include/asm-powerpc/spu.h @@ -100,6 +100,7 @@ /* Flag indicating progress during context switch. */ #define SPU_CONTEXT_SWITCH_PENDING 0UL +#define SPU_CONTEXT_FAULT_PENDING 1UL struct spu_context; struct spu_runqueue; @@ -128,9 +129,11 @@ struct spu { unsigned int irqs[3]; u32 node; u64 flags; - u64 dar; - u64 dsisr; u64 class_0_pending; + u64 class_0_dar; + u64 class_0_dsisr; + u64 class_1_dar; + u64 class_1_dsisr; size_t ls_size; unsigned int slb_replace; struct mm_struct *mm; @@ -143,7 +146,7 @@ struct spu { void (* wbox_callback)(struct spu *spu); void (* ibox_callback)(struct spu *spu); - void (* stop_callback)(struct spu *spu); + void (* stop_callback)(struct spu *spu, int irq); void (* mfc_callback)(struct spu *spu); char irq_c0[8]; diff --git a/include/asm-powerpc/spu_csa.h b/include/asm-powerpc/spu_csa.h index 0ab6bff..129ec14 100644 --- a/include/asm-powerpc/spu_csa.h +++ b/include/asm-powerpc/spu_csa.h @@ -254,7 +254,8 @@ struct spu_state { u64 spu_chnldata_RW[32]; u32 spu_mailbox_data[4]; u32 pu_mailbox_data[1]; - u64 dar, dsisr, class_0_pending; + u64 class_0_dar, class_0_dsisr, class_0_pending; + u64 class_1_dar, class_1_dsisr; unsigned long suspend_time; spinlock_t register_lock; }; diff --git a/include/asm-s390/kvm_host.h b/include/asm-s390/kvm_host.h index f8204a4..18cbd8a 100644 --- a/include/asm-s390/kvm_host.h +++ b/include/asm-s390/kvm_host.h @@ -104,6 +104,7 @@ struct sie_block { struct kvm_vcpu_stat { u32 exit_userspace; + u32 exit_null; u32 exit_external_request; u32 exit_external_interrupt; u32 exit_stop_request; diff --git a/include/asm-s390/page.h b/include/asm-s390/page.h index f0f4579..12fd9c4 100644 --- a/include/asm-s390/page.h +++ b/include/asm-s390/page.h @@ -125,6 +125,17 @@ page_get_storage_key(unsigned long addr) return skey; } +#ifdef CONFIG_PAGE_STATES + +struct page; +void arch_free_page(struct page *page, int order); +void arch_alloc_page(struct page *page, int order); + +#define HAVE_ARCH_FREE_PAGE +#define HAVE_ARCH_ALLOC_PAGE + +#endif + #endif /* !__ASSEMBLY__ */ /* to align the pointer to the (next) page boundary */ diff --git a/include/asm-s390/ptrace.h b/include/asm-s390/ptrace.h index 441d7c2..d7d4e2e 100644 --- a/include/asm-s390/ptrace.h +++ b/include/asm-s390/ptrace.h @@ -471,6 +471,8 @@ struct task_struct; extern void user_enable_single_step(struct task_struct *); extern void user_disable_single_step(struct task_struct *); +#define __ARCH_WANT_COMPAT_SYS_PTRACE + #define user_mode(regs) (((regs)->psw.mask & PSW_MASK_PSTATE) != 0) #define instruction_pointer(regs) ((regs)->psw.addr & PSW_ADDR_INSN) #define regs_return_value(regs)((regs)->gprs[2]) diff --git a/include/asm-s390/system.h b/include/asm-s390/system.h index c819ae2..e0d4500 100644 --- a/include/asm-s390/system.h +++ b/include/asm-s390/system.h @@ -116,6 +116,12 @@ extern void pfault_fini(void); #define pfault_fini() do { } while (0) #endif /* CONFIG_PFAULT */ +#ifdef CONFIG_PAGE_STATES +extern void cmma_init(void); +#else +static inline void cmma_init(void) { } +#endif + #define finish_arch_switch(prev) do { \ set_fs(current->thread.mm_segment); \ account_vtime(prev); \ diff --git a/include/asm-sh/cpu-sh3/dma.h b/include/asm-sh/cpu-sh3/dma.h index 092ff9d..6813c32 100644 --- a/include/asm-sh/cpu-sh3/dma.h +++ b/include/asm-sh/cpu-sh3/dma.h @@ -3,19 +3,19 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) + defined(CONFIG_CPU_SUBTYPE_SH7721) #define SH_DMAC_BASE 0xa4010020 +#else +#define SH_DMAC_BASE 0xa4000020 +#endif +#if defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7709) #define DMTE0_IRQ 48 #define DMTE1_IRQ 49 #define DMTE2_IRQ 50 #define DMTE3_IRQ 51 #define DMTE4_IRQ 76 #define DMTE5_IRQ 77 - -#else -#define SH_DMAC_BASE 0xa4000020 #endif /* Definitions for the SuperH DMAC */ diff --git a/include/asm-sh/hw_irq.h b/include/asm-sh/hw_irq.h index c958fda..7438d1e 100644 --- a/include/asm-sh/hw_irq.h +++ b/include/asm-sh/hw_irq.h @@ -79,6 +79,10 @@ struct intc_desc { struct intc_sense_reg *sense_regs; unsigned int nr_sense_regs; char *name; +#ifdef CONFIG_CPU_SH3 + struct intc_mask_reg *ack_regs; + unsigned int nr_ack_regs; +#endif }; #define _INTC_ARRAY(a) a, sizeof(a)/sizeof(*a) @@ -91,10 +95,25 @@ struct intc_desc symbol __initdata = { \ chipname, \ } +#ifdef CONFIG_CPU_SH3 +#define DECLARE_INTC_DESC_ACK(symbol, chipname, vectors, groups, \ + mask_regs, prio_regs, sense_regs, ack_regs) \ +struct intc_desc symbol __initdata = { \ + _INTC_ARRAY(vectors), _INTC_ARRAY(groups), \ + _INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs), \ + _INTC_ARRAY(sense_regs), \ + chipname, \ + _INTC_ARRAY(ack_regs), \ +} +#endif + void __init register_intc_controller(struct intc_desc *desc); int intc_set_priority(unsigned int irq, unsigned int prio); void __init plat_irq_setup(void); +#ifdef CONFIG_CPU_SH3 +void __init plat_irq_setup_sh3(void); +#endif enum { IRQ_MODE_IRQ, IRQ_MODE_IRQ7654, IRQ_MODE_IRQ3210, IRQ_MODE_IRL7654_MASK, IRQ_MODE_IRL3210_MASK, diff --git a/include/asm-sh/io.h b/include/asm-sh/io.h index 356e50d..a4fbf0c 100644 --- a/include/asm-sh/io.h +++ b/include/asm-sh/io.h @@ -268,11 +268,6 @@ unsigned long long peek_real_address_q(unsigned long long addr); unsigned long long poke_real_address_q(unsigned long long addr, unsigned long long val); -/* arch/sh/mm/ioremap_64.c */ -unsigned long onchip_remap(unsigned long addr, unsigned long size, - const char *name); -extern void onchip_unmap(unsigned long vaddr); - #if !defined(CONFIG_MMU) #define virt_to_phys(address) ((unsigned long)(address)) #define phys_to_virt(address) ((void *)(address)) @@ -302,9 +297,16 @@ extern void onchip_unmap(unsigned long vaddr); void __iomem *__ioremap(unsigned long offset, unsigned long size, unsigned long flags); void __iounmap(void __iomem *addr); + +/* arch/sh/mm/ioremap_64.c */ +unsigned long onchip_remap(unsigned long addr, unsigned long size, + const char *name); +extern void onchip_unmap(unsigned long vaddr); #else #define __ioremap(offset, size, flags) ((void __iomem *)(offset)) #define __iounmap(addr) do { } while (0) +#define onchip_remap(addr, size, name) (addr) +#define onchip_unmap(addr) do { } while (0) #endif /* CONFIG_MMU */ static inline void __iomem * diff --git a/include/asm-sh/keyboard.h b/include/asm-sh/keyboard.h deleted file mode 100644 index 31dcc4f..0000000 --- a/include/asm-sh/keyboard.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ASM_SH_KEYBOARD_H -#define __ASM_SH_KEYBOARD_H -/* - * $Id: keyboard.h,v 1.1.1.1 2001/10/15 20:45:09 mrbrown Exp $ - */ - -#include <linux/kd.h> -#include <asm/machvec.h> - -#ifdef CONFIG_SH_MPC1211 -#include <asm/mpc1211/keyboard-mpc1211.h> -#endif -#endif diff --git a/include/asm-sh/mmu_context.h b/include/asm-sh/mmu_context.h index fe58d00..87e812f 100644 --- a/include/asm-sh/mmu_context.h +++ b/include/asm-sh/mmu_context.h @@ -27,6 +27,7 @@ /* ASID is 8-bit value, so it can't be 0x100 */ #define MMU_NO_ASID 0x100 +#ifdef CONFIG_MMU #define asid_cache(cpu) (cpu_data[cpu].asid_cache) #define cpu_context(cpu, mm) ((mm)->context.id[cpu]) @@ -38,7 +39,6 @@ */ #define MMU_VPN_MASK 0xfffff000 -#ifdef CONFIG_MMU #if defined(CONFIG_SUPERH32) #include "mmu_context_32.h" #else @@ -129,6 +129,8 @@ static inline void switch_mm(struct mm_struct *prev, #define destroy_context(mm) do { } while (0) #define set_asid(asid) do { } while (0) #define get_asid() (0) +#define cpu_asid(cpu, mm) ({ (void)cpu; 0; }) +#define switch_and_save_asid(asid) (0) #define set_TTB(pgd) do { } while (0) #define get_TTB() (0) #define activate_context(mm,cpu) do { } while (0) diff --git a/include/asm-sh/mmzone.h b/include/asm-sh/mmzone.h index 7969f38..2969253 100644 --- a/include/asm-sh/mmzone.h +++ b/include/asm-sh/mmzone.h @@ -41,6 +41,8 @@ void __init plat_mem_setup(void); /* arch/sh/kernel/setup.c */ void __init setup_bootmem_allocator(unsigned long start_pfn); +void __init __add_active_range(unsigned int nid, unsigned long start_pfn, + unsigned long end_pfn); #endif /* __KERNEL__ */ #endif /* __ASM_SH_MMZONE_H */ diff --git a/include/asm-sh/mpc1211/dma.h b/include/asm-sh/mpc1211/dma.h deleted file mode 100644 index e506d1a..0000000 --- a/include/asm-sh/mpc1211/dma.h +++ /dev/null @@ -1,303 +0,0 @@ -/* $Id: dma.h,v 1.7 1992/12/14 00:29:34 root Exp root $ - * linux/include/asm/dma.h: Defines for using and allocating dma channels. - * Written by Hennus Bergman, 1992. - * High DMA channel support & info by Hannu Savolainen - * and John Boyd, Nov. 1992. - */ - -#ifndef _ASM_MPC1211_DMA_H -#define _ASM_MPC1211_DMA_H - -#include <linux/spinlock.h> /* And spinlocks */ -#include <asm/io.h> /* need byte IO */ -#include <linux/delay.h> - - -#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER -#define dma_outb outb_p -#else -#define dma_outb outb -#endif - -#define dma_inb inb - -/* - * NOTES about DMA transfers: - * - * controller 1: channels 0-3, byte operations, ports 00-1F - * controller 2: channels 4-7, word operations, ports C0-DF - * - * - ALL registers are 8 bits only, regardless of transfer size - * - channel 4 is not used - cascades 1 into 2. - * - channels 0-3 are byte - addresses/counts are for physical bytes - * - channels 5-7 are word - addresses/counts are for physical words - * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries - * - transfer count loaded to registers is 1 less than actual count - * - controller 2 offsets are all even (2x offsets for controller 1) - * - page registers for 5-7 don't use data bit 0, represent 128K pages - * - page registers for 0-3 use bit 0, represent 64K pages - * - * DMA transfers are limited to the lower 16MB of _physical_ memory. - * Note that addresses loaded into registers must be _physical_ addresses, - * not logical addresses (which may differ if paging is active). - * - * Address mapping for channels 0-3: - * - * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses) - * | ... | | ... | | ... | - * | ... | | ... | | ... | - * | ... | | ... | | ... | - * P7 ... P0 A7 ... A0 A7 ... A0 - * | Page | Addr MSB | Addr LSB | (DMA registers) - * - * Address mapping for channels 5-7: - * - * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses) - * | ... | \ \ ... \ \ \ ... \ \ - * | ... | \ \ ... \ \ \ ... \ (not used) - * | ... | \ \ ... \ \ \ ... \ - * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0 - * | Page | Addr MSB | Addr LSB | (DMA registers) - * - * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses - * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at - * the hardware level, so odd-byte transfers aren't possible). - * - * Transfer count (_not # bytes_) is limited to 64K, represented as actual - * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more, - * and up to 128K bytes may be transferred on channels 5-7 in one operation. - * - */ - -#define MAX_DMA_CHANNELS 8 - -/* The maximum address that we can perform a DMA transfer to on this platform */ -#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x10000000) - -/* 8237 DMA controllers */ -#define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */ -#define IO_DMA2_BASE 0xC0 /* 16 bit master DMA, ch 4(=slave input)..7 */ - -/* DMA controller registers */ -#define DMA1_CMD_REG 0x08 /* command register (w) */ -#define DMA1_STAT_REG 0x08 /* status register (r) */ -#define DMA1_REQ_REG 0x09 /* request register (w) */ -#define DMA1_MASK_REG 0x0A /* single-channel mask (w) */ -#define DMA1_MODE_REG 0x0B /* mode register (w) */ -#define DMA1_CLEAR_FF_REG 0x0C /* clear pointer flip-flop (w) */ -#define DMA1_TEMP_REG 0x0D /* Temporary Register (r) */ -#define DMA1_RESET_REG 0x0D /* Master Clear (w) */ -#define DMA1_CLR_MASK_REG 0x0E /* Clear Mask */ -#define DMA1_MASK_ALL_REG 0x0F /* all-channels mask (w) */ - -#define DMA2_CMD_REG 0xD0 /* command register (w) */ -#define DMA2_STAT_REG 0xD0 /* status register (r) */ -#define DMA2_REQ_REG 0xD2 /* request register (w) */ -#define DMA2_MASK_REG 0xD4 /* single-channel mask (w) */ -#define DMA2_MODE_REG 0xD6 /* mode register (w) */ -#define DMA2_CLEAR_FF_REG 0xD8 /* clear pointer flip-flop (w) */ -#define DMA2_TEMP_REG 0xDA /* Temporary Register (r) */ -#define DMA2_RESET_REG 0xDA /* Master Clear (w) */ -#define DMA2_CLR_MASK_REG 0xDC /* Clear Mask */ -#define DMA2_MASK_ALL_REG 0xDE /* all-channels mask (w) */ - -#define DMA_ADDR_0 0x00 /* DMA address registers */ -#define DMA_ADDR_1 0x02 -#define DMA_ADDR_2 0x04 -#define DMA_ADDR_3 0x06 -#define DMA_ADDR_4 0xC0 -#define DMA_ADDR_5 0xC4 -#define DMA_ADDR_6 0xC8 -#define DMA_ADDR_7 0xCC - -#define DMA_CNT_0 0x01 /* DMA count registers */ -#define DMA_CNT_1 0x03 -#define DMA_CNT_2 0x05 -#define DMA_CNT_3 0x07 -#define DMA_CNT_4 0xC2 -#define DMA_CNT_5 0xC6 -#define DMA_CNT_6 0xCA -#define DMA_CNT_7 0xCE - -#define DMA_PAGE_0 0x87 /* DMA page registers */ -#define DMA_PAGE_1 0x83 -#define DMA_PAGE_2 0x81 -#define DMA_PAGE_3 0x82 -#define DMA_PAGE_5 0x8B -#define DMA_PAGE_6 0x89 -#define DMA_PAGE_7 0x8A - -#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */ -#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */ -#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */ - -#define DMA_AUTOINIT 0x10 - - -extern spinlock_t dma_spin_lock; - -static __inline__ unsigned long claim_dma_lock(void) -{ - unsigned long flags; - spin_lock_irqsave(&dma_spin_lock, flags); - return flags; -} - -static __inline__ void release_dma_lock(unsigned long flags) -{ - spin_unlock_irqrestore(&dma_spin_lock, flags); -} - -/* enable/disable a specific DMA channel */ -static __inline__ void enable_dma(unsigned int dmanr) -{ - if (dmanr<=3) - dma_outb(dmanr, DMA1_MASK_REG); - else - dma_outb(dmanr & 3, DMA2_MASK_REG); -} - -static __inline__ void disable_dma(unsigned int dmanr) -{ - if (dmanr<=3) - dma_outb(dmanr | 4, DMA1_MASK_REG); - else - dma_outb((dmanr & 3) | 4, DMA2_MASK_REG); -} - -/* Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - * Use this once to initialize the FF to a known state. - * After that, keep track of it. :-) - * --- In order to do that, the DMA routines below should --- - * --- only be used while holding the DMA lock ! --- - */ -static __inline__ void clear_dma_ff(unsigned int dmanr) -{ - if (dmanr<=3) - dma_outb(0, DMA1_CLEAR_FF_REG); - else - dma_outb(0, DMA2_CLEAR_FF_REG); -} - -/* set mode (above) for a specific DMA channel */ -static __inline__ void set_dma_mode(unsigned int dmanr, char mode) -{ - if (dmanr<=3) - dma_outb(mode | dmanr, DMA1_MODE_REG); - else - dma_outb(mode | (dmanr&3), DMA2_MODE_REG); -} - -/* Set only the page register bits of the transfer address. - * This is used for successive transfers when we know the contents of - * the lower 16 bits of the DMA current address register, but a 64k boundary - * may have been crossed. - */ -static __inline__ void set_dma_page(unsigned int dmanr, unsigned int pagenr) -{ - switch(dmanr) { - case 0: - dma_outb( pagenr & 0xff, DMA_PAGE_0); - dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_0 + 0x400); - break; - case 1: - dma_outb( pagenr & 0xff, DMA_PAGE_1); - dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_1 + 0x400); - break; - case 2: - dma_outb( pagenr & 0xff, DMA_PAGE_2); - dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_2 + 0x400); - break; - case 3: - dma_outb( pagenr & 0xff, DMA_PAGE_3); - dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_3 + 0x400); - break; - case 5: - dma_outb( pagenr & 0xfe, DMA_PAGE_5); - dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_5 + 0x400); - break; - case 6: - dma_outb( pagenr & 0xfe, DMA_PAGE_6); - dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_6 + 0x400); - break; - case 7: - dma_outb( pagenr & 0xfe, DMA_PAGE_7); - dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_7 + 0x400); - break; - } -} - - -/* Set transfer address & page bits for specific DMA channel. - * Assumes dma flipflop is clear. - */ -static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) -{ - set_dma_page(dmanr, a>>16); - if (dmanr <= 3) { - dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); - dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); - } else { - dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); - dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); - } -} - - -/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for - * a specific DMA channel. - * You must ensure the parameters are valid. - * NOTE: from a manual: "the number of transfers is one more - * than the initial word count"! This is taken into account. - * Assumes dma flip-flop is clear. - * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7. - */ -static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) -{ - count--; - if (dmanr <= 3) { - dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); - dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); - } else { - dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); - dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); - } -} - - -/* Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * If called before the channel has been used, it may return 1. - * Otherwise, it returns the number of _bytes_ left to transfer. - * - * Assumes DMA flip-flop is clear. - */ -static __inline__ int get_dma_residue(unsigned int dmanr) -{ - unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE - : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE; - - /* using short to get 16-bit wrap around */ - unsigned short count; - - count = 1 + dma_inb(io_port); - count += dma_inb(io_port) << 8; - return (dmanr<=3)? count : (count<<1); -} - - -/* These are in kernel/dma.c: */ -extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */ -extern void free_dma(unsigned int dmanr); /* release it again */ - -/* From PCI */ - -#ifdef CONFIG_PCI -extern int isa_dma_bridge_buggy; -#else -#define isa_dma_bridge_buggy (0) -#endif - -#endif /* _ASM_MPC1211_DMA_H */ diff --git a/include/asm-sh/mpc1211/io.h b/include/asm-sh/mpc1211/io.h deleted file mode 100644 index 6298370..0000000 --- a/include/asm-sh/mpc1211/io.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * include/asm-sh/mpc1211/io.h - * - * Copyright 2001 Saito.K & Jeanne - * - * IO functions for an Interface MPC-1211 - */ - -#ifndef _ASM_SH_IO_MPC1211_H -#define _ASM_SH_IO_MPC1211_H - -#include <linux/time.h> - -extern int mpc1211_irq_demux(int irq); - -extern void init_mpc1211_IRQ(void); -extern void heartbeat_mpc1211(void); - -extern void mpc1211_rtc_gettimeofday(struct timeval *tv); -extern int mpc1211_rtc_settimeofday(const struct timeval *tv); - -#endif /* _ASM_SH_IO_MPC1211_H */ diff --git a/include/asm-sh/mpc1211/keyboard.h b/include/asm-sh/mpc1211/keyboard.h deleted file mode 100644 index 9020fee..0000000 --- a/include/asm-sh/mpc1211/keyboard.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * MPC1211 specific keybord definitions - * Taken from the old asm-i386/keybord.h for PC/AT-style definitions - * created 3 Nov 1996 by Geert Uytterhoeven. - */ - -#ifdef __KERNEL__ - -#include <linux/kernel.h> -#include <linux/ioport.h> -#include <linux/kd.h> -#include <linux/pm.h> -#include <asm/io.h> - -#define KEYBOARD_IRQ 1 -#define DISABLE_KBD_DURING_INTERRUPTS 0 - -extern int pckbd_setkeycode(unsigned int scancode, unsigned int keycode); -extern int pckbd_getkeycode(unsigned int scancode); -extern int pckbd_translate(unsigned char scancode, unsigned char *keycode, - char raw_mode); -extern char pckbd_unexpected_up(unsigned char keycode); -extern void pckbd_leds(unsigned char leds); -extern void pckbd_init_hw(void); -extern int pckbd_pm_resume(struct pm_dev *, pm_request_t, void *); -extern pm_callback pm_kbd_request_override; - -#define kbd_setkeycode pckbd_setkeycode -#define kbd_getkeycode pckbd_getkeycode -#define kbd_translate pckbd_translate -#define kbd_unexpected_up pckbd_unexpected_up -#define kbd_leds pckbd_leds -#define kbd_init_hw pckbd_init_hw - -/* resource allocation */ -#define kbd_request_region() -#define kbd_request_irq(handler) request_irq(KEYBOARD_IRQ, handler, 0, \ - "keyboard", NULL) - -/* How to access the keyboard macros on this platform. */ -#define kbd_read_input() inb(KBD_DATA_REG) -#define kbd_read_status() inb(KBD_STATUS_REG) -#define kbd_write_output(val) outb(val, KBD_DATA_REG) -#define kbd_write_command(val) outb(val, KBD_CNTL_REG) - -/* Some stoneage hardware needs delays after some operations. */ -#define kbd_pause() do { } while(0) - -/* - * Machine specific bits for the PS/2 driver - */ - -#define AUX_IRQ 12 - -#define aux_request_irq(hand, dev_id) \ - request_irq(AUX_IRQ, hand, IRQF_SHARED, "PS2 Mouse", dev_id) - -#define aux_free_irq(dev_id) free_irq(AUX_IRQ, dev_id) - -#endif /* __KERNEL__ */ diff --git a/include/asm-sh/mpc1211/m1543c.h b/include/asm-sh/mpc1211/m1543c.h deleted file mode 100644 index c95d132..0000000 --- a/include/asm-sh/mpc1211/m1543c.h +++ /dev/null @@ -1,200 +0,0 @@ -#ifndef __ASM_SH_M1543C_H -#define __ASM_SH_M1543C_H - -/* - * linux/include/asm-sh/m1543c.h - * Copyright (C) 2001 Nobuhiro Sakawa - * M1543C:PCI-ISA Bus Bridge with Super IO Chip support - * - * from - * - * linux/include/asm-sh/smc37c93x.h - * - * Copyright (C) 2000 Kazumoto Kojima - * - * SMSC 37C93x Super IO Chip support - */ - -/* Default base I/O address */ -#define FDC_PRIMARY_BASE 0x3f0 -#define IDE1_PRIMARY_BASE 0x1f0 -#define IDE1_SECONDARY_BASE 0x170 -#define PARPORT_PRIMARY_BASE 0x378 -#define COM1_PRIMARY_BASE 0x2f8 -#define COM2_PRIMARY_BASE 0x3f8 -#define COM3_PRIMARY_BASE 0x3e8 -#define RTC_PRIMARY_BASE 0x070 -#define KBC_PRIMARY_BASE 0x060 -#define AUXIO_PRIMARY_BASE 0x000 /* XXX */ -#define I8259_M_CR 0x20 -#define I8259_M_MR 0x21 -#define I8259_S_CR 0xa0 -#define I8259_S_MR 0xa1 - -/* Logical device number */ -#define LDN_FDC 0 -#define LDN_IDE1 1 -#define LDN_IDE2 2 -#define LDN_PARPORT 3 -#define LDN_COM1 4 -#define LDN_COM2 5 -#define LDN_COM3 11 -#define LDN_RTC 6 -#define LDN_KBC 7 - -/* Configuration port and key */ -#define CONFIG_PORT 0x3f0 -#define INDEX_PORT CONFIG_PORT -#define DATA_PORT 0x3f1 -#define CONFIG_ENTER1 0x51 -#define CONFIG_ENTER2 0x23 -#define CONFIG_EXIT 0xbb - -/* Configuration index */ -#define CURRENT_LDN_INDEX 0x07 -#define POWER_CONTROL_INDEX 0x22 -#define ACTIVATE_INDEX 0x30 -#define IO_BASE_HI_INDEX 0x60 -#define IO_BASE_LO_INDEX 0x61 -#define IRQ_SELECT_INDEX 0x70 -#define PS2_IRQ_INDEX 0x72 -#define DMA_SELECT_INDEX 0x74 - -/* UART stuff. Only for debugging. */ -/* UART Register */ - -#define UART_RBR 0x0 /* Receiver Buffer Register (Read Only) */ -#define UART_THR 0x0 /* Transmitter Holding Register (Write Only) */ -#define UART_IER 0x2 /* Interrupt Enable Register */ -#define UART_IIR 0x4 /* Interrupt Ident Register (Read Only) */ -#define UART_FCR 0x4 /* FIFO Control Register (Write Only) */ -#define UART_LCR 0x6 /* Line Control Register */ -#define UART_MCR 0x8 /* MODEM Control Register */ -#define UART_LSR 0xa /* Line Status Register */ -#define UART_MSR 0xc /* MODEM Status Register */ -#define UART_SCR 0xe /* Scratch Register */ -#define UART_DLL 0x0 /* Divisor Latch (LS) */ -#define UART_DLM 0x2 /* Divisor Latch (MS) */ - -#ifndef __ASSEMBLY__ -typedef struct uart_reg { - volatile __u16 rbr; - volatile __u16 ier; - volatile __u16 iir; - volatile __u16 lcr; - volatile __u16 mcr; - volatile __u16 lsr; - volatile __u16 msr; - volatile __u16 scr; -} uart_reg; -#endif /* ! __ASSEMBLY__ */ - -/* Alias for Write Only Register */ - -#define thr rbr -#define tcr iir - -/* Alias for Divisor Latch Register */ - -#define dll rbr -#define dlm ier -#define fcr iir - -/* Interrupt Enable Register */ - -#define IER_ERDAI 0x0100 /* Enable Received Data Available Interrupt */ -#define IER_ETHREI 0x0200 /* Enable Transmitter Holding Register Empty Interrupt */ -#define IER_ELSI 0x0400 /* Enable Receiver Line Status Interrupt */ -#define IER_EMSI 0x0800 /* Enable MODEM Status Interrupt */ - -/* Interrupt Ident Register */ - -#define IIR_IP 0x0100 /* "0" if Interrupt Pending */ -#define IIR_IIB0 0x0200 /* Interrupt ID Bit 0 */ -#define IIR_IIB1 0x0400 /* Interrupt ID Bit 1 */ -#define IIR_IIB2 0x0800 /* Interrupt ID Bit 2 */ -#define IIR_FIFO 0xc000 /* FIFOs enabled */ - -/* FIFO Control Register */ - -#define FCR_FEN 0x0100 /* FIFO enable */ -#define FCR_RFRES 0x0200 /* Receiver FIFO reset */ -#define FCR_TFRES 0x0400 /* Transmitter FIFO reset */ -#define FCR_DMA 0x0800 /* DMA mode select */ -#define FCR_RTL 0x4000 /* Receiver triger (LSB) */ -#define FCR_RTM 0x8000 /* Receiver triger (MSB) */ - -/* Line Control Register */ - -#define LCR_WLS0 0x0100 /* Word Length Select Bit 0 */ -#define LCR_WLS1 0x0200 /* Word Length Select Bit 1 */ -#define LCR_STB 0x0400 /* Number of Stop Bits */ -#define LCR_PEN 0x0800 /* Parity Enable */ -#define LCR_EPS 0x1000 /* Even Parity Select */ -#define LCR_SP 0x2000 /* Stick Parity */ -#define LCR_SB 0x4000 /* Set Break */ -#define LCR_DLAB 0x8000 /* Divisor Latch Access Bit */ - -/* MODEM Control Register */ - -#define MCR_DTR 0x0100 /* Data Terminal Ready */ -#define MCR_RTS 0x0200 /* Request to Send */ -#define MCR_OUT1 0x0400 /* Out 1 */ -#define MCR_IRQEN 0x0800 /* IRQ Enable */ -#define MCR_LOOP 0x1000 /* Loop */ - -/* Line Status Register */ - -#define LSR_DR 0x0100 /* Data Ready */ -#define LSR_OE 0x0200 /* Overrun Error */ -#define LSR_PE 0x0400 /* Parity Error */ -#define LSR_FE 0x0800 /* Framing Error */ -#define LSR_BI 0x1000 /* Break Interrupt */ -#define LSR_THRE 0x2000 /* Transmitter Holding Register Empty */ -#define LSR_TEMT 0x4000 /* Transmitter Empty */ -#define LSR_FIFOE 0x8000 /* Receiver FIFO error */ - -/* MODEM Status Register */ - -#define MSR_DCTS 0x0100 /* Delta Clear to Send */ -#define MSR_DDSR 0x0200 /* Delta Data Set Ready */ -#define MSR_TERI 0x0400 /* Trailing Edge Ring Indicator */ -#define MSR_DDCD 0x0800 /* Delta Data Carrier Detect */ -#define MSR_CTS 0x1000 /* Clear to Send */ -#define MSR_DSR 0x2000 /* Data Set Ready */ -#define MSR_RI 0x4000 /* Ring Indicator */ -#define MSR_DCD 0x8000 /* Data Carrier Detect */ - -/* Baud Rate Divisor */ - -#define UART_CLK (1843200) /* 1.8432 MHz */ -#define UART_BAUD(x) (UART_CLK / (16 * (x))) - -/* RTC register definition */ -#define RTC_SECONDS 0 -#define RTC_SECONDS_ALARM 1 -#define RTC_MINUTES 2 -#define RTC_MINUTES_ALARM 3 -#define RTC_HOURS 4 -#define RTC_HOURS_ALARM 5 -#define RTC_DAY_OF_WEEK 6 -#define RTC_DAY_OF_MONTH 7 -#define RTC_MONTH 8 -#define RTC_YEAR 9 -#define RTC_FREQ_SELECT 10 -# define RTC_UIP 0x80 -# define RTC_DIV_CTL 0x70 -/* This RTC can work under 32.768KHz clock only. */ -# define RTC_OSC_ENABLE 0x20 -# define RTC_OSC_DISABLE 0x00 -#define RTC_CONTROL 11 -# define RTC_SET 0x80 -# define RTC_PIE 0x40 -# define RTC_AIE 0x20 -# define RTC_UIE 0x10 -# define RTC_SQWE 0x08 -# define RTC_DM_BINARY 0x04 -# define RTC_24H 0x02 -# define RTC_DST_EN 0x01 - -#endif /* __ASM_SH_M1543C_H */ diff --git a/include/asm-sh/mpc1211/mc146818rtc.h b/include/asm-sh/mpc1211/mc146818rtc.h deleted file mode 100644 index e245f2a..0000000 --- a/include/asm-sh/mpc1211/mc146818rtc.h +++ /dev/null @@ -1,6 +0,0 @@ -/* - * MPC1211 uses PC/AT style RTC definitions. - */ -#include <asm-x86/mc146818rtc_32.h> - - diff --git a/include/asm-sh/mpc1211/mpc1211.h b/include/asm-sh/mpc1211/mpc1211.h deleted file mode 100644 index fa456c3..0000000 --- a/include/asm-sh/mpc1211/mpc1211.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef __ASM_SH_MPC1211_H -#define __ASM_SH_MPC1211_H - -/* - * linux/include/asm-sh/mpc1211.h - * - * Copyright (C) 2001 Saito.K & Jeanne - * - * Interface MPC-1211 support - */ - -#define PA_PCI_IO (0xa4000000) /* PCI I/O space */ -#define PA_PCI_MEM (0xb0000000) /* PCI MEM space */ - -#define PCIPAR (0xa4000cf8) /* PCI Config address */ -#define PCIPDR (0xa4000cfc) /* PCI Config data */ - -#endif /* __ASM_SH_MPC1211_H */ diff --git a/include/asm-sh/mpc1211/pci.h b/include/asm-sh/mpc1211/pci.h deleted file mode 100644 index d9162c5..0000000 --- a/include/asm-sh/mpc1211/pci.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * Low-Level PCI Support for MPC-1211 - * - * (c) 2002 Saito.K & Jeanne - * - */ - -#ifndef _PCI_MPC1211_H_ -#define _PCI_MPC1211_H_ - -#include <linux/pci.h> - -/* set debug level 4=verbose...1=terse */ -//#define DEBUG_PCI 3 -#undef DEBUG_PCI - -#ifdef DEBUG_PCI -#define PCIDBG(n, x...) { if(DEBUG_PCI>=n) printk(x); } -#else -#define PCIDBG(n, x...) -#endif - -/* startup values */ -#define PCI_PROBE_BIOS 1 -#define PCI_PROBE_CONF1 2 -#define PCI_PROBE_CONF2 4 -#define PCI_NO_CHECKS 0x400 -#define PCI_ASSIGN_ROMS 0x1000 -#define PCI_BIOS_IRQ_SCAN 0x2000 - -/* MPC-1211 Specific Values */ -#define PCIPAR (0xa4000cf8) /* PCI Config address */ -#define PCIPDR (0xa4000cfc) /* PCI Config data */ - -#define PA_PCI_IO (0xa4000000) /* PCI I/O space */ -#define PA_PCI_MEM (0xb0000000) /* PCI MEM space */ - -#endif /* _PCI_MPC1211_H_ */ diff --git a/include/asm-sh/r7780rp.h b/include/asm-sh/r7780rp.h index a33838f..306f735 100644 --- a/include/asm-sh/r7780rp.h +++ b/include/asm-sh/r7780rp.h @@ -193,8 +193,6 @@ #define IRQ_SCIF0 (HL_FPGA_IRQ_BASE + 15) #define IRQ_SCIF1 (HL_FPGA_IRQ_BASE + 16) -unsigned char *highlander_init_irq_r7780mp(void); -unsigned char *highlander_init_irq_r7780rp(void); -unsigned char *highlander_init_irq_r7785rp(void); +unsigned char *highlander_plat_irq_setup(void); #endif /* __ASM_SH_RENESAS_R7780RP */ diff --git a/include/asm-sh/tlb_64.h b/include/asm-sh/tlb_64.h index 0308e05..0a96f3a 100644 --- a/include/asm-sh/tlb_64.h +++ b/include/asm-sh/tlb_64.h @@ -56,6 +56,7 @@ static inline void __flush_tlb_slot(unsigned long long slot) __asm__ __volatile__ ("putcfg %0, 0, r63\n" : : "r" (slot)); } +#ifdef CONFIG_MMU /* arch/sh64/mm/tlb.c */ int sh64_tlb_init(void); unsigned long long sh64_next_free_dtlb_entry(void); @@ -64,6 +65,13 @@ int sh64_put_wired_dtlb_entry(unsigned long long entry); void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr, unsigned long asid, unsigned long paddr); void sh64_teardown_tlb_slot(unsigned long long config_addr); - +#else +#define sh64_tlb_init() do { } while (0) +#define sh64_next_free_dtlb_entry() (0) +#define sh64_get_wired_dtlb_entry() (0) +#define sh64_put_wired_dtlb_entry(entry) do { } while (0) +#define sh64_setup_tlb_slot(conf, virt, asid, phys) do { } while (0) +#define sh64_teardown_tlb_slot(addr) do { } while (0) +#endif /* CONFIG_MMU */ #endif /* __ASSEMBLY__ */ #endif /* __ASM_SH_TLB_64_H */ diff --git a/include/asm-sh/topology.h b/include/asm-sh/topology.h index 34cdb28..95f0085 100644 --- a/include/asm-sh/topology.h +++ b/include/asm-sh/topology.h @@ -29,6 +29,17 @@ .nr_balance_failed = 0, \ } +#define cpu_to_node(cpu) ((void)(cpu),0) +#define parent_node(node) ((void)(node),0) + +#define node_to_cpumask(node) ((void)node, cpu_online_map) +#define node_to_first_cpu(node) ((void)(node),0) + +#define pcibus_to_node(bus) ((void)(bus), -1) +#define pcibus_to_cpumask(bus) (pcibus_to_node(bus) == -1 ? \ + CPU_MASK_ALL : \ + node_to_cpumask(pcibus_to_node(bus)) \ + ) #endif #include <asm-generic/topology.h> diff --git a/include/asm-sh/uaccess_64.h b/include/asm-sh/uaccess_64.h index f956b7b..a9b68d0 100644 --- a/include/asm-sh/uaccess_64.h +++ b/include/asm-sh/uaccess_64.h @@ -274,7 +274,9 @@ struct exception_table_entry unsigned long insn, fixup; }; +#ifdef CONFIG_MMU #define ARCH_HAS_SEARCH_EXTABLE +#endif /* Returns 0 if exception not found and fixup.unit otherwise. */ extern unsigned long search_exception_table(unsigned long addr); diff --git a/include/asm-x86/bitops.h b/include/asm-x86/bitops.h index b81a4d4..ee4b3ea 100644 --- a/include/asm-x86/bitops.h +++ b/include/asm-x86/bitops.h @@ -23,13 +23,10 @@ #if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 1) /* Technically wrong, but this avoids compilation errors on some gcc versions. */ -#define ADDR "=m" (*(volatile long *)addr) -#define BIT_ADDR "=m" (((volatile int *)addr)[nr >> 5]) +#define ADDR "=m" (*(volatile long *) addr) #else #define ADDR "+m" (*(volatile long *) addr) -#define BIT_ADDR "+m" (((volatile int *)addr)[nr >> 5]) #endif -#define BASE_ADDR "m" (*(volatile int *)addr) /** * set_bit - Atomically set a bit in memory @@ -77,7 +74,7 @@ static inline void __set_bit(int nr, volatile void *addr) */ static inline void clear_bit(int nr, volatile void *addr) { - asm volatile(LOCK_PREFIX "btr %1,%2" : BIT_ADDR : "Ir" (nr), BASE_ADDR); + asm volatile(LOCK_PREFIX "btr %1,%0" : ADDR : "Ir" (nr)); } /* @@ -96,7 +93,7 @@ static inline void clear_bit_unlock(unsigned nr, volatile void *addr) static inline void __clear_bit(int nr, volatile void *addr) { - asm volatile("btr %1,%2" : BIT_ADDR : "Ir" (nr), BASE_ADDR); + asm volatile("btr %1,%0" : ADDR : "Ir" (nr)); } /* @@ -131,7 +128,7 @@ static inline void __clear_bit_unlock(unsigned nr, volatile void *addr) */ static inline void __change_bit(int nr, volatile void *addr) { - asm volatile("btc %1,%2" : BIT_ADDR : "Ir" (nr), BASE_ADDR); + asm volatile("btc %1,%0" : ADDR : "Ir" (nr)); } /** @@ -145,7 +142,7 @@ static inline void __change_bit(int nr, volatile void *addr) */ static inline void change_bit(int nr, volatile void *addr) { - asm volatile(LOCK_PREFIX "btc %1,%2" : BIT_ADDR : "Ir" (nr), BASE_ADDR); + asm volatile(LOCK_PREFIX "btc %1,%0" : ADDR : "Ir" (nr)); } /** @@ -191,9 +188,10 @@ static inline int __test_and_set_bit(int nr, volatile void *addr) { int oldbit; - asm volatile("bts %2,%3\n\t" - "sbb %0,%0" - : "=r" (oldbit), BIT_ADDR : "Ir" (nr), BASE_ADDR); + asm("bts %2,%1\n\t" + "sbb %0,%0" + : "=r" (oldbit), ADDR + : "Ir" (nr)); return oldbit; } @@ -229,9 +227,10 @@ static inline int __test_and_clear_bit(int nr, volatile void *addr) { int oldbit; - asm volatile("btr %2,%3\n\t" + asm volatile("btr %2,%1\n\t" "sbb %0,%0" - : "=r" (oldbit), BIT_ADDR : "Ir" (nr), BASE_ADDR); + : "=r" (oldbit), ADDR + : "Ir" (nr)); return oldbit; } @@ -240,9 +239,10 @@ static inline int __test_and_change_bit(int nr, volatile void *addr) { int oldbit; - asm volatile("btc %2,%3\n\t" + asm volatile("btc %2,%1\n\t" "sbb %0,%0" - : "=r" (oldbit), BIT_ADDR : "Ir" (nr), BASE_ADDR); + : "=r" (oldbit), ADDR + : "Ir" (nr) : "memory"); return oldbit; } @@ -276,11 +276,10 @@ static inline int variable_test_bit(int nr, volatile const void *addr) { int oldbit; - asm volatile("bt %2,%3\n\t" + asm volatile("bt %2,%1\n\t" "sbb %0,%0" : "=r" (oldbit) - : "m" (((volatile const int *)addr)[nr >> 5]), - "Ir" (nr), BASE_ADDR); + : "m" (*(unsigned long *)addr), "Ir" (nr)); return oldbit; } @@ -397,8 +396,6 @@ static inline int fls(int x) } #endif /* __KERNEL__ */ -#undef BASE_ADDR -#undef BIT_ADDR #undef ADDR static inline void set_bit_string(unsigned long *bitmap, diff --git a/include/asm-x86/bootparam.h b/include/asm-x86/bootparam.h index e865990..f62f473 100644 --- a/include/asm-x86/bootparam.h +++ b/include/asm-x86/bootparam.h @@ -14,10 +14,10 @@ /* extensible setup data list node */ struct setup_data { - u64 next; - u32 type; - u32 len; - u8 data[0]; + __u64 next; + __u32 type; + __u32 len; + __u8 data[0]; }; struct setup_header { diff --git a/include/asm-x86/geode.h b/include/asm-x86/geode.h index 7154dc4..6e64588 100644 --- a/include/asm-x86/geode.h +++ b/include/asm-x86/geode.h @@ -185,16 +185,14 @@ static inline int is_geode(void) return (is_geode_gx() || is_geode_lx()); } -/* - * The VSA has virtual registers that we can query for a signature. - */ +#ifdef CONFIG_MGEODE_LX +extern int geode_has_vsa2(void); +#else static inline int geode_has_vsa2(void) { - outw(VSA_VR_UNLOCK, VSA_VRC_INDEX); - outw(VSA_VR_SIGNATURE, VSA_VRC_INDEX); - - return (inw(VSA_VRC_DATA) == VSA_SIG); + return 0; } +#endif /* MFGPTs */ diff --git a/include/asm-x86/i387.h b/include/asm-x86/i387.h index da2adb4..6b722d3 100644 --- a/include/asm-x86/i387.h +++ b/include/asm-x86/i387.h @@ -175,7 +175,15 @@ static inline int save_i387(struct _fpstate __user *buf) */ static inline int restore_i387(struct _fpstate __user *buf) { - set_used_math(); + struct task_struct *tsk = current; + int err; + + if (!used_math()) { + err = init_fpu(tsk); + if (err) + return err; + } + if (!(task_thread_info(current)->status & TS_USEDFPU)) { clts(); task_thread_info(current)->status |= TS_USEDFPU; diff --git a/include/asm-x86/kvm_host.h b/include/asm-x86/kvm_host.h index 9d963cd..1d8cd01 100644 --- a/include/asm-x86/kvm_host.h +++ b/include/asm-x86/kvm_host.h @@ -314,6 +314,9 @@ struct kvm_arch{ struct page *apic_access_page; gpa_t wall_clock; + + struct page *ept_identity_pagetable; + bool ept_identity_pagetable_done; }; struct kvm_vm_stat { @@ -422,6 +425,7 @@ struct kvm_x86_ops { struct kvm_run *run); int (*set_tss_addr)(struct kvm *kvm, unsigned int addr); + int (*get_tdp_level)(void); }; extern struct kvm_x86_ops *kvm_x86_ops; @@ -433,6 +437,9 @@ void kvm_mmu_destroy(struct kvm_vcpu *vcpu); int kvm_mmu_create(struct kvm_vcpu *vcpu); int kvm_mmu_setup(struct kvm_vcpu *vcpu); void kvm_mmu_set_nonpresent_ptes(u64 trap_pte, u64 notrap_pte); +void kvm_mmu_set_base_ptes(u64 base_pte); +void kvm_mmu_set_mask_ptes(u64 user_mask, u64 accessed_mask, + u64 dirty_mask, u64 nx_mask, u64 x_mask); int kvm_mmu_reset_context(struct kvm_vcpu *vcpu); void kvm_mmu_slot_remove_write_access(struct kvm *kvm, int slot); @@ -620,7 +627,7 @@ static inline void fx_restore(struct i387_fxsave_struct *image) asm("fxrstor (%0)":: "r" (image)); } -static inline void fpu_init(void) +static inline void fx_finit(void) { asm("finit"); } @@ -644,6 +651,7 @@ static inline void kvm_inject_gp(struct kvm_vcpu *vcpu, u32 error_code) #define ASM_VMX_VMWRITE_RSP_RDX ".byte 0x0f, 0x79, 0xd4" #define ASM_VMX_VMXOFF ".byte 0x0f, 0x01, 0xc4" #define ASM_VMX_VMXON_RAX ".byte 0xf3, 0x0f, 0xc7, 0x30" +#define ASM_VMX_INVEPT ".byte 0x66, 0x0f, 0x38, 0x80, 0x08" #define ASM_VMX_INVVPID ".byte 0x66, 0x0f, 0x38, 0x81, 0x08" #define MSR_IA32_TIME_STAMP_COUNTER 0x010 diff --git a/include/asm-x86/pat.h b/include/asm-x86/pat.h index 8b822b5..88f60cc 100644 --- a/include/asm-x86/pat.h +++ b/include/asm-x86/pat.h @@ -4,7 +4,13 @@ #include <linux/types.h> +#ifdef CONFIG_X86_PAT extern int pat_wc_enabled; +extern void validate_pat_support(struct cpuinfo_x86 *c); +#else +static const int pat_wc_enabled = 0; +static inline void validate_pat_support(struct cpuinfo_x86 *c) { } +#endif extern void pat_init(void); @@ -12,5 +18,7 @@ extern int reserve_memtype(u64 start, u64 end, unsigned long req_type, unsigned long *ret_type); extern int free_memtype(u64 start, u64 end); +extern void pat_disable(char *reason); + #endif diff --git a/include/asm-x86/pgtable_32.h b/include/asm-x86/pgtable_32.h index 577ab79..d7f0403 100644 --- a/include/asm-x86/pgtable_32.h +++ b/include/asm-x86/pgtable_32.h @@ -88,14 +88,7 @@ extern unsigned long pg0[]; /* To avoid harmful races, pmd_none(x) should check only the lower when PAE */ #define pmd_none(x) (!(unsigned long)pmd_val((x))) #define pmd_present(x) (pmd_val((x)) & _PAGE_PRESENT) - -extern int pmd_bad(pmd_t pmd); - -#define pmd_bad_v1(x) \ - (_KERNPG_TABLE != (pmd_val((x)) & ~(PAGE_MASK | _PAGE_USER))) -#define pmd_bad_v2(x) \ - (_KERNPG_TABLE != (pmd_val((x)) & ~(PAGE_MASK | _PAGE_USER | \ - _PAGE_PSE | _PAGE_NX))) +#define pmd_bad(x) ((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE) #define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) diff --git a/include/asm-x86/pgtable_64.h b/include/asm-x86/pgtable_64.h index a3bbf87..efe83dc 100644 --- a/include/asm-x86/pgtable_64.h +++ b/include/asm-x86/pgtable_64.h @@ -158,14 +158,12 @@ static inline unsigned long pgd_bad(pgd_t pgd) static inline unsigned long pud_bad(pud_t pud) { - return pud_val(pud) & - ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER | _PAGE_PSE | _PAGE_NX); + return pud_val(pud) & ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER); } static inline unsigned long pmd_bad(pmd_t pmd) { - return pmd_val(pmd) & - ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER | _PAGE_PSE | _PAGE_NX); + return pmd_val(pmd) & ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER); } #define pte_none(x) (!pte_val((x))) diff --git a/include/asm-x86/spinlock.h b/include/asm-x86/spinlock.h index bc6376f..21e89bf 100644 --- a/include/asm-x86/spinlock.h +++ b/include/asm-x86/spinlock.h @@ -20,18 +20,8 @@ */ #ifdef CONFIG_X86_32 -typedef char _slock_t; -# define LOCK_INS_DEC "decb" -# define LOCK_INS_XCH "xchgb" -# define LOCK_INS_MOV "movb" -# define LOCK_INS_CMP "cmpb" # define LOCK_PTR_REG "a" #else -typedef int _slock_t; -# define LOCK_INS_DEC "decl" -# define LOCK_INS_XCH "xchgl" -# define LOCK_INS_MOV "movl" -# define LOCK_INS_CMP "cmpl" # define LOCK_PTR_REG "D" #endif @@ -66,14 +56,14 @@ typedef int _slock_t; #if (NR_CPUS < 256) static inline int __raw_spin_is_locked(raw_spinlock_t *lock) { - int tmp = *(volatile signed int *)(&(lock)->slock); + int tmp = ACCESS_ONCE(lock->slock); return (((tmp >> 8) & 0xff) != (tmp & 0xff)); } static inline int __raw_spin_is_contended(raw_spinlock_t *lock) { - int tmp = *(volatile signed int *)(&(lock)->slock); + int tmp = ACCESS_ONCE(lock->slock); return (((tmp >> 8) & 0xff) - (tmp & 0xff)) > 1; } @@ -130,14 +120,14 @@ static __always_inline void __raw_spin_unlock(raw_spinlock_t *lock) #else static inline int __raw_spin_is_locked(raw_spinlock_t *lock) { - int tmp = *(volatile signed int *)(&(lock)->slock); + int tmp = ACCESS_ONCE(lock->slock); return (((tmp >> 16) & 0xffff) != (tmp & 0xffff)); } static inline int __raw_spin_is_contended(raw_spinlock_t *lock) { - int tmp = *(volatile signed int *)(&(lock)->slock); + int tmp = ACCESS_ONCE(lock->slock); return (((tmp >> 16) & 0xffff) - (tmp & 0xffff)) > 1; } diff --git a/include/asm-x86/topology.h b/include/asm-x86/topology.h index 4f35a0f..dcf3f81 100644 --- a/include/asm-x86/topology.h +++ b/include/asm-x86/topology.h @@ -25,6 +25,16 @@ #ifndef _ASM_X86_TOPOLOGY_H #define _ASM_X86_TOPOLOGY_H +#ifdef CONFIG_X86_32 +# ifdef CONFIG_X86_HT +# define ENABLE_TOPO_DEFINES +# endif +#else +# ifdef CONFIG_SMP +# define ENABLE_TOPO_DEFINES +# endif +#endif + #ifdef CONFIG_NUMA #include <linux/cpumask.h> #include <asm/mpspec.h> @@ -130,10 +140,6 @@ extern unsigned long node_end_pfn[]; extern unsigned long node_remap_size[]; #define node_has_online_mem(nid) (node_start_pfn[nid] != node_end_pfn[nid]) -# ifdef CONFIG_X86_HT -# define ENABLE_TOPO_DEFINES -# endif - # define SD_CACHE_NICE_TRIES 1 # define SD_IDLE_IDX 1 # define SD_NEWIDLE_IDX 2 @@ -141,10 +147,6 @@ extern unsigned long node_remap_size[]; #else -# ifdef CONFIG_SMP -# define ENABLE_TOPO_DEFINES -# endif - # define SD_CACHE_NICE_TRIES 2 # define SD_IDLE_IDX 2 # define SD_NEWIDLE_IDX 2 diff --git a/include/linux/compiler.h b/include/linux/compiler.h index dcae0c8..c8bd2da 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -182,4 +182,16 @@ extern void __chk_io_ptr(const volatile void __iomem *); # define __section(S) __attribute__ ((__section__(#S))) #endif +/* + * Prevent the compiler from merging or refetching accesses. The compiler + * is also forbidden from reordering successive instances of ACCESS_ONCE(), + * but only when the compiler is aware of some particular ordering. One way + * to make the compiler aware of ordering is to put the two invocations of + * ACCESS_ONCE() in different C statements. + * + * This macro does absolutely -nothing- to prevent the CPU from reordering, + * merging, or refetching absolutely anything at any time. + */ +#define ACCESS_ONCE(x) (*(volatile typeof(x) *)&(x)) + #endif /* __LINUX_COMPILER_H */ diff --git a/include/linux/exportfs.h b/include/linux/exportfs.h index de8387b..f5abd13 100644 --- a/include/linux/exportfs.h +++ b/include/linux/exportfs.h @@ -33,6 +33,19 @@ enum fid_type { * 32 bit parent directory inode number. */ FILEID_INO32_GEN_PARENT = 2, + + /* + * 32 bit block number, 16 bit partition reference, + * 16 bit unused, 32 bit generation number. + */ + FILEID_UDF_WITHOUT_PARENT = 0x51, + + /* + * 32 bit block number, 16 bit partition reference, + * 16 bit unused, 32 bit generation number, + * 32 bit parent block number, 32 bit parent generation number + */ + FILEID_UDF_WITH_PARENT = 0x52, }; struct fid { @@ -43,6 +56,14 @@ struct fid { u32 parent_ino; u32 parent_gen; } i32; + struct { + u32 block; + u16 partref; + u16 parent_partref; + u32 generation; + u32 parent_block; + u32 parent_generation; + } udf; __u32 raw[0]; }; }; diff --git a/include/linux/fs.h b/include/linux/fs.h index a1ba005..f413085 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1289,17 +1289,12 @@ extern ssize_t vfs_readv(struct file *, const struct iovec __user *, extern ssize_t vfs_writev(struct file *, const struct iovec __user *, unsigned long, loff_t *); -/* - * NOTE: write_inode, delete_inode, clear_inode, put_inode can be called - * without the big kernel lock held in all filesystems. - */ struct super_operations { struct inode *(*alloc_inode)(struct super_block *sb); void (*destroy_inode)(struct inode *); void (*dirty_inode) (struct inode *); int (*write_inode) (struct inode *, int); - void (*put_inode) (struct inode *); void (*drop_inode) (struct inode *); void (*delete_inode) (struct inode *); void (*put_super) (struct super_block *); @@ -1821,7 +1816,6 @@ extern void iget_failed(struct inode *); extern void clear_inode(struct inode *); extern void destroy_inode(struct inode *); extern struct inode *new_inode(struct super_block *); -extern int __remove_suid(struct dentry *, int); extern int should_remove_suid(struct dentry *); extern int remove_suid(struct dentry *); diff --git a/include/linux/genhd.h b/include/linux/genhd.h index ecd2bf6..e9874e7 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -178,17 +178,17 @@ static inline struct hd_struct *get_part(struct gendisk *gendiskp, static inline void disk_stat_set_all(struct gendisk *gendiskp, int value) { int i; + for_each_possible_cpu(i) memset(per_cpu_ptr(gendiskp->dkstats, i), value, - sizeof (struct disk_stats)); + sizeof(struct disk_stats)); } #define __part_stat_add(part, field, addnd) \ (per_cpu_ptr(part->dkstats, smp_processor_id())->field += addnd) -#define __all_stat_add(gendiskp, field, addnd, sector) \ +#define __all_stat_add(gendiskp, part, field, addnd, sector) \ ({ \ - struct hd_struct *part = get_part(gendiskp, sector); \ if (part) \ __part_stat_add(part, field, addnd); \ __disk_stat_add(gendiskp, field, addnd); \ @@ -203,11 +203,13 @@ static inline void disk_stat_set_all(struct gendisk *gendiskp, int value) { res; \ }) -static inline void part_stat_set_all(struct hd_struct *part, int value) { +static inline void part_stat_set_all(struct hd_struct *part, int value) +{ int i; + for_each_possible_cpu(i) memset(per_cpu_ptr(part->dkstats, i), value, - sizeof(struct disk_stats)); + sizeof(struct disk_stats)); } #else /* !CONFIG_SMP */ @@ -223,9 +225,8 @@ static inline void disk_stat_set_all(struct gendisk *gendiskp, int value) #define __part_stat_add(part, field, addnd) \ (part->dkstats.field += addnd) -#define __all_stat_add(gendiskp, field, addnd, sector) \ +#define __all_stat_add(gendiskp, part, field, addnd, sector) \ ({ \ - struct hd_struct *part = get_part(gendiskp, sector); \ if (part) \ part->dkstats.field += addnd; \ __disk_stat_add(gendiskp, field, addnd); \ @@ -276,10 +277,10 @@ static inline void part_stat_set_all(struct hd_struct *part, int value) #define part_stat_sub(gendiskp, field, subnd) \ part_stat_add(gendiskp, field, -subnd) -#define all_stat_add(gendiskp, field, addnd, sector) \ +#define all_stat_add(gendiskp, part, field, addnd, sector) \ do { \ preempt_disable(); \ - __all_stat_add(gendiskp, field, addnd, sector); \ + __all_stat_add(gendiskp, part, field, addnd, sector); \ preempt_enable(); \ } while (0) @@ -288,15 +289,15 @@ static inline void part_stat_set_all(struct hd_struct *part, int value) #define all_stat_dec(gendiskp, field, sector) \ all_stat_add(gendiskp, field, -1, sector) -#define __all_stat_inc(gendiskp, field, sector) \ - __all_stat_add(gendiskp, field, 1, sector) -#define all_stat_inc(gendiskp, field, sector) \ - all_stat_add(gendiskp, field, 1, sector) +#define __all_stat_inc(gendiskp, part, field, sector) \ + __all_stat_add(gendiskp, part, field, 1, sector) +#define all_stat_inc(gendiskp, part, field, sector) \ + all_stat_add(gendiskp, part, field, 1, sector) -#define __all_stat_sub(gendiskp, field, subnd, sector) \ - __all_stat_add(gendiskp, field, -subnd, sector) -#define all_stat_sub(gendiskp, field, subnd, sector) \ - all_stat_add(gendiskp, field, -subnd, sector) +#define __all_stat_sub(gendiskp, part, field, subnd, sector) \ + __all_stat_add(gendiskp, part, field, -subnd, sector) +#define all_stat_sub(gendiskp, part, field, subnd, sector) \ + all_stat_add(gendiskp, part, field, -subnd, sector) /* Inlines to alloc and free disk stats in struct gendisk */ #ifdef CONFIG_SMP diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h index 897f723..181006c 100644 --- a/include/linux/hardirq.h +++ b/include/linux/hardirq.h @@ -72,6 +72,14 @@ #define in_softirq() (softirq_count()) #define in_interrupt() (irq_count()) +#if defined(CONFIG_PREEMPT) +# define PREEMPT_INATOMIC_BASE kernel_locked() +# define PREEMPT_CHECK_OFFSET 1 +#else +# define PREEMPT_INATOMIC_BASE 0 +# define PREEMPT_CHECK_OFFSET 0 +#endif + /* * Are we running in atomic context? WARNING: this macro cannot * always detect atomic context; in particular, it cannot know about @@ -79,17 +87,11 @@ * used in the general case to determine whether sleeping is possible. * Do not use in_atomic() in driver code. */ -#define in_atomic() ((preempt_count() & ~PREEMPT_ACTIVE) != 0) - -#ifdef CONFIG_PREEMPT -# define PREEMPT_CHECK_OFFSET 1 -#else -# define PREEMPT_CHECK_OFFSET 0 -#endif +#define in_atomic() ((preempt_count() & ~PREEMPT_ACTIVE) != PREEMPT_INATOMIC_BASE) /* * Check whether we were atomic before we did preempt_disable(): - * (used by the scheduler) + * (used by the scheduler, *after* releasing the kernel lock) */ #define in_atomic_preempt_off() \ ((preempt_count() & ~PREEMPT_ACTIVE) != PREEMPT_CHECK_OFFSET) diff --git a/include/linux/io.h b/include/linux/io.h index 3a03a36..6c7f0ba 100644 --- a/include/linux/io.h +++ b/include/linux/io.h @@ -65,5 +65,6 @@ void __iomem *devm_ioremap_nocache(struct device *dev, resource_size_t offset, void devm_iounmap(struct device *dev, void __iomem *addr); int check_signature(const volatile void __iomem *io_addr, const unsigned char *signature, int length); +void devm_ioremap_release(struct device *dev, void *res); #endif /* _LINUX_IO_H */ diff --git a/include/linux/ioprio.h b/include/linux/ioprio.h index 2a3bb1b..f98a656 100644 --- a/include/linux/ioprio.h +++ b/include/linux/ioprio.h @@ -68,6 +68,20 @@ static inline int task_nice_ioprio(struct task_struct *task) } /* + * This is for the case where the task hasn't asked for a specific IO class. + * Check for idle and rt task process, and return appropriate IO class. + */ +static inline int task_nice_ioclass(struct task_struct *task) +{ + if (task->policy == SCHED_IDLE) + return IOPRIO_CLASS_IDLE; + else if (task->policy == SCHED_FIFO || task->policy == SCHED_RR) + return IOPRIO_CLASS_RT; + else + return IOPRIO_CLASS_BE; +} + +/* * For inheritance, return the highest of the two given priorities */ extern int ioprio_best(unsigned short aprio, unsigned short bprio); diff --git a/include/linux/kgdb.h b/include/linux/kgdb.h index 9757b1a..6adcc29 100644 --- a/include/linux/kgdb.h +++ b/include/linux/kgdb.h @@ -261,10 +261,12 @@ struct kgdb_io { extern struct kgdb_arch arch_kgdb_ops; +extern unsigned long __weak kgdb_arch_pc(int exception, struct pt_regs *regs); + extern int kgdb_register_io_module(struct kgdb_io *local_kgdb_io_ops); extern void kgdb_unregister_io_module(struct kgdb_io *local_kgdb_io_ops); -extern int kgdb_hex2long(char **ptr, long *long_val); +extern int kgdb_hex2long(char **ptr, unsigned long *long_val); extern int kgdb_mem2hex(char *mem, char *buf, int count); extern int kgdb_hex2mem(char *buf, char *mem, int count); diff --git a/include/linux/libata.h b/include/linux/libata.h index d1dfe87..0f17643 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1039,6 +1039,7 @@ extern void ata_eh_thaw_port(struct ata_port *ap); extern void ata_eh_qc_complete(struct ata_queued_cmd *qc); extern void ata_eh_qc_retry(struct ata_queued_cmd *qc); +extern void ata_eh_analyze_ncq_error(struct ata_link *link); extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, @@ -1381,6 +1382,18 @@ static inline struct ata_port *ata_shost_to_port(struct Scsi_Host *host) return *(struct ata_port **)&host->hostdata[0]; } +static inline int ata_check_ready(u8 status) +{ + if (!(status & ATA_BUSY)) + return 1; + + /* 0xff indicates either no device or device not ready */ + if (status == 0xff) + return -ENODEV; + + return 0; +} + /************************************************************************** * PMP - drivers/ata/libata-pmp.c diff --git a/include/linux/mv643xx_eth.h b/include/linux/mv643xx_eth.h index 30e11aa..a15cdd4 100644 --- a/include/linux/mv643xx_eth.h +++ b/include/linux/mv643xx_eth.h @@ -1,19 +1,31 @@ /* * MV-643XX ethernet platform device data definition file. */ + #ifndef __LINUX_MV643XX_ETH_H #define __LINUX_MV643XX_ETH_H -#define MV643XX_ETH_SHARED_NAME "mv643xx_eth_shared" -#define MV643XX_ETH_NAME "mv643xx_eth" +#include <linux/mbus.h> + +#define MV643XX_ETH_SHARED_NAME "mv643xx_eth" +#define MV643XX_ETH_NAME "mv643xx_eth_port" #define MV643XX_ETH_SHARED_REGS 0x2000 #define MV643XX_ETH_SHARED_REGS_SIZE 0x2000 #define MV643XX_ETH_BAR_4 0x2220 #define MV643XX_ETH_SIZE_REG_4 0x2224 #define MV643XX_ETH_BASE_ADDR_ENABLE_REG 0x2290 +struct mv643xx_eth_shared_platform_data { + struct mbus_dram_target_info *dram; + unsigned int t_clk; +}; + struct mv643xx_eth_platform_data { + struct platform_device *shared; int port_number; + + struct platform_device *shared_smi; + u16 force_phy_addr; /* force override if phy_addr == 0 */ u16 phy_addr; diff --git a/include/linux/netfilter/nf_conntrack_sip.h b/include/linux/netfilter/nf_conntrack_sip.h index 5da04e5..23aa2ec 100644 --- a/include/linux/netfilter/nf_conntrack_sip.h +++ b/include/linux/netfilter/nf_conntrack_sip.h @@ -7,6 +7,7 @@ struct nf_ct_sip_master { unsigned int register_cseq; + unsigned int invite_cseq; }; enum sip_expectation_classes { diff --git a/include/linux/of_i2c.h b/include/linux/of_i2c.h index 2e5a967..bd2a870 100644 --- a/include/linux/of_i2c.h +++ b/include/linux/of_i2c.h @@ -14,11 +14,7 @@ #include <linux/i2c.h> -#ifdef CONFIG_OF_I2C - void of_register_i2c_devices(struct i2c_adapter *adap, struct device_node *adap_node); -#endif /* CONFIG_OF_I2C */ - #endif /* __LINUX_OF_I2C_H */ diff --git a/include/linux/pci.h b/include/linux/pci.h index 96acd0d..509159b 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -44,6 +44,7 @@ #include <linux/mod_devicetable.h> #include <linux/types.h> +#include <linux/init.h> #include <linux/ioport.h> #include <linux/list.h> #include <linux/compiler.h> @@ -474,7 +475,7 @@ extern struct pci_bus *pci_find_bus(int domain, int busnr); void pci_bus_add_devices(struct pci_bus *bus); struct pci_bus *pci_scan_bus_parented(struct device *parent, int bus, struct pci_ops *ops, void *sysdata); -static inline struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops, +static inline struct pci_bus * __devinit pci_scan_bus(int bus, struct pci_ops *ops, void *sysdata) { struct pci_bus *root_bus; @@ -666,7 +667,7 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, void pci_walk_bus(struct pci_bus *top, void (*cb)(struct pci_dev *, void *), void *userdata); -int pci_cfg_space_size_ext(struct pci_dev *dev, unsigned check_exp_pcix); +int pci_cfg_space_size_ext(struct pci_dev *dev); int pci_cfg_space_size(struct pci_dev *dev); unsigned char pci_bus_max_busnr(struct pci_bus *bus); diff --git a/include/linux/phy.h b/include/linux/phy.h index 02df20f..7224c40 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -412,6 +412,8 @@ int mdiobus_register(struct mii_bus *bus); void mdiobus_unregister(struct mii_bus *bus); void phy_sanitize_settings(struct phy_device *phydev); int phy_stop_interrupts(struct phy_device *phydev); +int phy_enable_interrupts(struct phy_device *phydev); +int phy_disable_interrupts(struct phy_device *phydev); static inline int phy_read_status(struct phy_device *phydev) { return phydev->drv->read_status(phydev); @@ -447,5 +449,8 @@ int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask, int (*run)(struct phy_device *)); int phy_scan_fixups(struct phy_device *phydev); +int __init mdio_bus_init(void); +void mdio_bus_exit(void); + extern struct bus_type mdio_bus_type; #endif /* __PHY_H */ diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 8082d65..d42dbec 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -131,18 +131,6 @@ struct rcu_head { */ #define rcu_read_unlock_bh() __rcu_read_unlock_bh() -/* - * Prevent the compiler from merging or refetching accesses. The compiler - * is also forbidden from reordering successive instances of ACCESS_ONCE(), - * but only when the compiler is aware of some particular ordering. One way - * to make the compiler aware of ordering is to put the two invocations of - * ACCESS_ONCE() in different C statements. - * - * This macro does absolutely -nothing- to prevent the CPU from reordering, - * merging, or refetching absolutely anything at any time. - */ -#define ACCESS_ONCE(x) (*(volatile typeof(x) *)&(x)) - /** * rcu_dereference - fetch an RCU-protected pointer in an * RCU read-side critical section. This pointer may later diff --git a/include/linux/sched.h b/include/linux/sched.h index 03c2380..0c35b03 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -158,6 +158,8 @@ print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq) } #endif +extern unsigned long long time_sync_thresh; + /* * Task state bitmask. NOTE! These bits are also * encoded in fs/proc/array.c: get_task_state(). @@ -1551,6 +1553,35 @@ static inline int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask) extern unsigned long long sched_clock(void); +#ifndef CONFIG_HAVE_UNSTABLE_SCHED_CLOCK +static inline void sched_clock_init(void) +{ +} + +static inline u64 sched_clock_cpu(int cpu) +{ + return sched_clock(); +} + +static inline void sched_clock_tick(void) +{ +} + +static inline void sched_clock_idle_sleep_event(void) +{ +} + +static inline void sched_clock_idle_wakeup_event(u64 delta_ns) +{ +} +#else +extern void sched_clock_init(void); +extern u64 sched_clock_cpu(int cpu); +extern void sched_clock_tick(void); +extern void sched_clock_idle_sleep_event(void); +extern void sched_clock_idle_wakeup_event(u64 delta_ns); +#endif + /* * For kernel-internal use: high-speed (but slightly incorrect) per-cpu * clock constructed from sched_clock(): @@ -1977,6 +2008,11 @@ static inline void clear_tsk_need_resched(struct task_struct *tsk) clear_tsk_thread_flag(tsk,TIF_NEED_RESCHED); } +static inline int test_tsk_need_resched(struct task_struct *tsk) +{ + return unlikely(test_tsk_thread_flag(tsk,TIF_NEED_RESCHED)); +} + static inline int signal_pending(struct task_struct *p) { return unlikely(test_tsk_thread_flag(p,TIF_SIGPENDING)); @@ -1991,7 +2027,7 @@ static inline int fatal_signal_pending(struct task_struct *p) static inline int need_resched(void) { - return unlikely(test_thread_flag(TIF_NEED_RESCHED)); + return unlikely(test_tsk_need_resched(current)); } /* diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h index 27bad59..7858eac 100644 --- a/include/linux/sysfs.h +++ b/include/linux/sysfs.h @@ -196,12 +196,6 @@ static inline int sysfs_update_group(struct kobject *kobj, return 0; } -static inline int sysfs_update_group(struct kobject *kobj, - const struct attribute_group *grp) -{ - return 0; -} - static inline void sysfs_remove_group(struct kobject *kobj, const struct attribute_group *grp) { diff --git a/include/linux/vermagic.h b/include/linux/vermagic.h index 4d0909e..79b9837 100644 --- a/include/linux/vermagic.h +++ b/include/linux/vermagic.h @@ -17,6 +17,11 @@ #else #define MODULE_VERMAGIC_MODULE_UNLOAD "" #endif +#ifdef CONFIG_MODVERSIONS +#define MODULE_VERMAGIC_MODVERSIONS "modversions " +#else +#define MODULE_VERMAGIC_MODVERSIONS "" +#endif #ifndef MODULE_ARCH_VERMAGIC #define MODULE_ARCH_VERMAGIC "" #endif @@ -24,5 +29,6 @@ #define VERMAGIC_STRING \ UTS_RELEASE " " \ MODULE_VERMAGIC_SMP MODULE_VERMAGIC_PREEMPT \ - MODULE_VERMAGIC_MODULE_UNLOAD MODULE_ARCH_VERMAGIC + MODULE_VERMAGIC_MODULE_UNLOAD MODULE_VERMAGIC_MODVERSIONS \ + MODULE_ARCH_VERMAGIC diff --git a/include/net/ip.h b/include/net/ip.h index 6d7bcd5..3b40bc2 100644 --- a/include/net/ip.h +++ b/include/net/ip.h @@ -210,7 +210,7 @@ int ip_dont_fragment(struct sock *sk, struct dst_entry *dst) { return (inet_sk(sk)->pmtudisc == IP_PMTUDISC_DO || (inet_sk(sk)->pmtudisc == IP_PMTUDISC_WANT && - !(dst_metric(dst, RTAX_LOCK)&(1<<RTAX_MTU)))); + !(dst_metric_locked(dst, RTAX_MTU)))); } extern void __ip_select_ident(struct iphdr *iph, struct dst_entry *dst, int more); diff --git a/include/net/xfrm.h b/include/net/xfrm.h index d1350bc..2933d747 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -648,14 +648,46 @@ extern void xfrm_audit_state_notfound(struct sk_buff *skb, u16 family, extern void xfrm_audit_state_icvfail(struct xfrm_state *x, struct sk_buff *skb, u8 proto); #else -#define xfrm_audit_policy_add(x, r, a, se, s) do { ; } while (0) -#define xfrm_audit_policy_delete(x, r, a, se, s) do { ; } while (0) -#define xfrm_audit_state_add(x, r, a, se, s) do { ; } while (0) -#define xfrm_audit_state_delete(x, r, a, se, s) do { ; } while (0) -#define xfrm_audit_state_replay_overflow(x, s) do { ; } while (0) -#define xfrm_audit_state_notfound_simple(s, f) do { ; } while (0) -#define xfrm_audit_state_notfound(s, f, sp, sq) do { ; } while (0) -#define xfrm_audit_state_icvfail(x, s, p) do { ; } while (0) + +static inline void xfrm_audit_policy_add(struct xfrm_policy *xp, int result, + u32 auid, u32 ses, u32 secid) +{ +} + +static inline void xfrm_audit_policy_delete(struct xfrm_policy *xp, int result, + u32 auid, u32 ses, u32 secid) +{ +} + +static inline void xfrm_audit_state_add(struct xfrm_state *x, int result, + u32 auid, u32 ses, u32 secid) +{ +} + +static inline void xfrm_audit_state_delete(struct xfrm_state *x, int result, + u32 auid, u32 ses, u32 secid) +{ +} + +static inline void xfrm_audit_state_replay_overflow(struct xfrm_state *x, + struct sk_buff *skb) +{ +} + +static inline void xfrm_audit_state_notfound_simple(struct sk_buff *skb, + u16 family) +{ +} + +static inline void xfrm_audit_state_notfound(struct sk_buff *skb, u16 family, + __be32 net_spi, __be32 net_seq) +{ +} + +static inline void xfrm_audit_state_icvfail(struct xfrm_state *x, + struct sk_buff *skb, u8 proto) +{ +} #endif /* CONFIG_AUDITSYSCALL */ static inline void xfrm_pol_hold(struct xfrm_policy *policy) |