diff options
Diffstat (limited to 'init')
| -rw-r--r-- | init/calibrate.c | 60 |
1 files changed, 32 insertions, 28 deletions
diff --git a/init/calibrate.c b/init/calibrate.c index ecb3822..7963e3f 100644 --- a/init/calibrate.c +++ b/init/calibrate.c @@ -8,7 +8,9 @@ #include <linux/delay.h> #include <linux/init.h> #include <linux/timex.h> +#include <linux/smp.h> +unsigned long lpj_fine; unsigned long preset_lpj; static int __init lpj_setup(char *str) { @@ -33,9 +35,9 @@ static unsigned long __cpuinit calibrate_delay_direct(void) unsigned long pre_start, start, post_start; unsigned long pre_end, end, post_end; unsigned long start_jiffies; - unsigned long tsc_rate_min, tsc_rate_max; - unsigned long good_tsc_sum = 0; - unsigned long good_tsc_count = 0; + unsigned long timer_rate_min, timer_rate_max; + unsigned long good_timer_sum = 0; + unsigned long good_timer_count = 0; int i; if (read_current_timer(&pre_start) < 0 ) @@ -79,22 +81,24 @@ static unsigned long __cpuinit calibrate_delay_direct(void) } read_current_timer(&post_end); - tsc_rate_max = (post_end - pre_start) / DELAY_CALIBRATION_TICKS; - tsc_rate_min = (pre_end - post_start) / DELAY_CALIBRATION_TICKS; + timer_rate_max = (post_end - pre_start) / + DELAY_CALIBRATION_TICKS; + timer_rate_min = (pre_end - post_start) / + DELAY_CALIBRATION_TICKS; /* - * If the upper limit and lower limit of the tsc_rate is + * If the upper limit and lower limit of the timer_rate is * >= 12.5% apart, redo calibration. */ if (pre_start != 0 && pre_end != 0 && - (tsc_rate_max - tsc_rate_min) < (tsc_rate_max >> 3)) { - good_tsc_count++; - good_tsc_sum += tsc_rate_max; + (timer_rate_max - timer_rate_min) < (timer_rate_max >> 3)) { + good_timer_count++; + good_timer_sum += timer_rate_max; } } - if (good_tsc_count) - return (good_tsc_sum/good_tsc_count); + if (good_timer_count) + return (good_timer_sum/good_timer_count); printk(KERN_WARNING "calibrate_delay_direct() failed to get a good " "estimate for loops_per_jiffy.\nProbably due to long platform interrupts. Consider using \"lpj=\" boot option.\n"); @@ -108,6 +112,10 @@ static unsigned long __cpuinit calibrate_delay_direct(void) {return 0;} * This is the number of bits of precision for the loops_per_jiffy. Each * bit takes on average 1.5/HZ seconds. This (like the original) is a little * better than 1% + * For the boot cpu we can skip the delay calibration and assign it a value + * calculated based on the timer frequency. + * For the rest of the CPUs we cannot assume that the timer frequency is same as + * the cpu frequency, hence do the calibration for those. */ #define LPS_PREC 8 @@ -118,20 +126,20 @@ void __cpuinit calibrate_delay(void) if (preset_lpj) { loops_per_jiffy = preset_lpj; - printk("Calibrating delay loop (skipped)... " - "%lu.%02lu BogoMIPS preset\n", - loops_per_jiffy/(500000/HZ), - (loops_per_jiffy/(5000/HZ)) % 100); + printk(KERN_INFO + "Calibrating delay loop (skipped) preset value.. "); + } else if ((smp_processor_id() == 0) && lpj_fine) { + loops_per_jiffy = lpj_fine; + printk(KERN_INFO + "Calibrating delay loop (skipped), " + "value calculated using timer frequency.. "); } else if ((loops_per_jiffy = calibrate_delay_direct()) != 0) { - printk("Calibrating delay using timer specific routine.. "); - printk("%lu.%02lu BogoMIPS (lpj=%lu)\n", - loops_per_jiffy/(500000/HZ), - (loops_per_jiffy/(5000/HZ)) % 100, - loops_per_jiffy); + printk(KERN_INFO + "Calibrating delay using timer specific routine.. "); } else { loops_per_jiffy = (1<<12); - printk(KERN_DEBUG "Calibrating delay loop... "); + printk(KERN_INFO "Calibrating delay loop... "); while ((loops_per_jiffy <<= 1) != 0) { /* wait for "start of" clock tick */ ticks = jiffies; @@ -161,12 +169,8 @@ void __cpuinit calibrate_delay(void) if (jiffies != ticks) /* longer than 1 tick */ loops_per_jiffy &= ~loopbit; } - - /* Round the value and print it */ - printk("%lu.%02lu BogoMIPS (lpj=%lu)\n", - loops_per_jiffy/(500000/HZ), - (loops_per_jiffy/(5000/HZ)) % 100, - loops_per_jiffy); } - + printk(KERN_INFO "%lu.%02lu BogoMIPS (lpj=%lu)\n", + loops_per_jiffy/(500000/HZ), + (loops_per_jiffy/(5000/HZ)) % 100, loops_per_jiffy); } |