aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: clean up remain-on-channel on interface stopJohannes Berg2012-06-172-0/+28
| | | | | | | | | | | | | | | | | | | | | commit 71ecfa1893034eeb1c93e02e22ee2ad26d080858 upstream. When any interface goes down, it could be the one that we were doing a remain-on-channel with. We therefore need to cancel the remain-on-channel and flush the related work structs so they don't run after the interface has been removed or even destroyed. It's also possible in this case that an off-channel SKB was never transmitted, so free it if this is the case. Note that this can also happen if the driver finishes the off-channel period without ever starting it. Reported-by: Nirav Shah <nirav.j2.shah@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* crypto: aesni-intel - fix unaligned cbc decrypt for x86-32Mathias Krause2012-06-171-2/+4
| | | | | | | | | | | | | | | | | | commit 7c8d51848a88aafdb68f42b6b650c83485ea2f84 upstream. The 32 bit variant of cbc(aes) decrypt is using instructions requiring 128 bit aligned memory locations but fails to ensure this constraint in the code. Fix this by loading the data into intermediate registers with load unaligned instructions. This fixes reported general protection faults related to aesni. References: https://bugzilla.kernel.org/show_bug.cgi?id=43223 Reported-by: Daniel <garkein@mailueberfall.de> Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc: Fix kernel panic during kernel module loadSteffen Rumler2012-06-171-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 3c75296562f43e6fbc6cddd3de948a7b3e4e9bcf upstream. This fixes a problem which can causes kernel oopses while loading a kernel module. According to the PowerPC EABI specification, GPR r11 is assigned the dedicated function to point to the previous stack frame. In the powerpc-specific kernel module loader, do_plt_call() (in arch/powerpc/kernel/module_32.c), GPR r11 is also used to generate trampoline code. This combination crashes the kernel, in the case where the compiler chooses to use a helper function for saving GPRs on entry, and the module loader has placed the .init.text section far away from the .text section, meaning that it has to generate a trampoline for functions in the .init.text section to call the GPR save helper. Because the trampoline trashes r11, references to the stack frame using r11 can cause an oops. The fix just uses GPR r12 instead of GPR r11 for generating the trampoline code. According to the statements from Freescale, this is safe from an EABI perspective. I've tested the fix for kernel 2.6.33 on MPC8541. Signed-off-by: Steffen Rumler <steffen.rumler.ext@nsn.com> [paulus@samba.org: reworded the description] Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* btree: fix tree corruption in btree_get_prev()Roland Dreier2012-06-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | commit cbf8ae32f66a9ceb8907ad9e16663c2a29e48990 upstream. The memory the parameter __key points to is used as an iterator in btree_get_prev(), so if we save off a bkey() pointer in retry_key and then assign that to __key, we'll end up corrupting the btree internals when we do eg longcpy(__key, bkey(geo, node, i), geo->keylen); to return the key value. What we should do instead is use longcpy() to copy the key value that retry_key points to __key. This can cause a btree to get corrupted by seemingly read-only operations such as btree_for_each_safe. [akpm@linux-foundation.org: avoid the double longcpy()] Signed-off-by: Roland Dreier <roland@purestorage.com> Acked-by: Joern Engel <joern@logfs.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* char/agp: add another Ironlake host bridgeEugeni Dodonov2012-06-172-0/+2
| | | | | | | | | | | | | commit 67384fe3fd450536342330f684ea1f7dcaef8130 upstream. This seems to come on Gigabyte H55M-S2V and was discovered through the https://bugs.freedesktop.org/show_bug.cgi?id=50381 debugging. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50381 Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Linux 3.0.34Greg Kroah-Hartman2012-06-101-1/+1
|
* ext4: don't set i_flags in EXT4_IOC_SETFLAGSTao Ma2012-06-101-1/+0
| | | | | | | | | | | | | | commit b22b1f178f6799278d3178d894f37facb2085765 upstream. Commit 7990696 uses the ext4_{set,clear}_inode_flags() functions to change the i_flags automatically but fails to remove the error setting of i_flags. So we still have the problem of trashing state flags. Fix this by removing the assignment. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* wl1251: fix oops on early interruptGrazvydas Ignotas2012-06-102-3/+2
| | | | | | | | | | | | | | | | | | commit f380f2c4a12e913356bd49f8790ec1063c4fe9f8 upstream. This driver disables interrupt just after requesting it and enables it later, after interface is up. However currently there is a time window between request_irq() and disable_irq() where if interrupt arrives, the driver oopses because it's not yet ready to process it. This can be reproduced by inserting the module, associating and removing the module multiple times. Eliminate this race by setting IRQF_NOAUTOEN flag before request_irq(). Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ACPI battery: only refresh the sysfs files when pertinent information changesAndy Whitcroft2012-06-101-1/+9
| | | | | | | | | | | | | | | | | commit c5971456964290da7e98222892797b71ef793e62 upstream. We only need to regenerate the sysfs files when the capacity units change, avoid the update otherwise. The origin of this issue is dates way back to 2.6.38: da8aeb92d4853f37e281f11fddf61f9c7d84c3cd (ACPI / Battery: Update information on info notification and resume) Signed-off-by: Andy Whitcroft <apw@canonical.com> Tested-by: Ralf Jung <post@ralfj.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/radeon/kms: add new BTC PCI idsAlex Deucher2012-06-101-0/+2
| | | | | | | | | commit a2bef8ce826dd1e787fd8ad9b6e0566ba59dab43 upstream. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ext4: remove mb_groups before tearing down the buddy_cacheSalman Qazi2012-06-101-2/+3
| | | | | | | | | | | | | | | | | | | | | commit 95599968d19db175829fb580baa6b68939b320fb upstream. We can't have references held on pages in the s_buddy_cache while we are trying to truncate its pages and put the inode. All the pages must be gone before we reach clear_inode. This can only be gauranteed if we can prevent new users from grabbing references to s_buddy_cache's pages. The original bug can be reproduced and the bug fix can be verified by: while true; do mount -t ext4 /dev/ram0 /export/hda3/ram0; \ umount /export/hda3/ram0; done & while true; do cat /proc/fs/ext4/ram0/mb_groups; done Signed-off-by: Salman Qazi <sqazi@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ext4: add ext4_mb_unload_buddy in the error pathSalman Qazi2012-06-101-0/+1
| | | | | | | | | | | | commit 02b7831019ea4e7994968c84b5826fa8b248ffc8 upstream. ext4_free_blocks fails to pair an ext4_mb_load_buddy with a matching ext4_mb_unload_buddy when it fails a memory allocation. Signed-off-by: Salman Qazi <sqazi@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ext4: don't trash state flags in EXT4_IOC_SETFLAGSTheodore Ts'o2012-06-101-3/+9
| | | | | | | | | | | | | | | | commit 79906964a187c405db72a3abc60eb9b50d804fbc upstream. In commit 353eb83c we removed i_state_flags with 64-bit longs, But when handling the EXT4_IOC_SETFLAGS ioctl, we replace i_flags directly, which trashes the state flags which are stored in the high 32-bits of i_flags on 64-bit platforms. So use the the ext4_{set,clear}_inode_flags() functions which use atomic bit manipulation functions instead. Reported-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ext4: add missing save_error_info() to ext4_error()Theodore Ts'o2012-06-101-0/+1
| | | | | | | | | | | | | | | | commit f3fc0210c0fc91900766c995f089c39170e68305 upstream. The ext4_error() function is missing a call to save_error_info(). Since this is the function which marks the file system as containing an error, this oversight (which was introduced in 2.6.36) is quite significant, and should be backported to older stable kernels with high urgency. Reported-by: Ken Sumrall <ksumrall@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: ksumrall@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ext4: force ro mount if ext4_setup_super() failsEric Sandeen2012-06-101-1/+2
| | | | | | | | | | | | | | | | | | | | | | | commit 7e84b6216467b84cd332c8e567bf5aa113fd2f38 upstream. If ext4_setup_super() fails i.e. due to a too-high revision, the error is logged in dmesg but the fs is not mounted RO as indicated. Tested by: # mkfs.ext4 -r 4 /dev/sdb6 # mount /dev/sdb6 /mnt/test # dmesg | grep "too high" [164919.759248] EXT4-fs (sdb6): revision level too high, forcing read-only mode # grep sdb6 /proc/mounts /dev/sdb6 /mnt/test2 ext4 rw,seclabel,relatime,data=ordered 0 0 Reviewed-by: Andreas Dilger <adilger@whamcloud.com> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xfrm: take net hdr len into account for esp payload size calculationBenjamin Poirier2012-06-102-26/+16
| | | | | | | | | | | | | | | | [ Upstream commit 91657eafb64b4cb53ec3a2fbc4afc3497f735788 ] Corrects the function that determines the esp payload size. The calculations done in esp{4,6}_get_mtu() lead to overlength frames in transport mode for certain mtu values and suboptimal frames for others. According to what is done, mainly in esp{,6}_output() and tcp_mtu_to_mss(), net_header_len must be taken into account before doing the alignment calculation. Signed-off-by: Benjamin Poirier <bpoirier@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* skb: avoid unnecessary reallocations in __skb_cowFelix Fietkau2012-06-101-2/+0
| | | | | | | | | | | | | | | | | | | | [ Upstream commit 617c8c11236716dcbda877e764b7bf37c6fd8063 ] At the beginning of __skb_cow, headroom gets set to a minimum of NET_SKB_PAD. This causes unnecessary reallocations if the buffer was not cloned and the headroom is just below NET_SKB_PAD, but still more than the amount requested by the caller. This was showing up frequently in my tests on VLAN tx, where vlan_insert_tag calls skb_cow_head(skb, VLAN_HLEN). Locally generated packets should have enough headroom, and for forward paths, we already have NET_SKB_PAD bytes of headroom, so we don't need to add any extra space here. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: check cached dst before using itNicolas Dichtel2012-06-103-20/+14
| | | | | | | | | | | | [ Upstream commit e0268868ba064980488fc8c194db3d8e9fb2959c ] dst_check() will take care of SA (and obsolete field), hence IPsec rekeying scenario is taken into account. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Vlad Yaseivch <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Revert "net: maintain namespace isolation between vlan and real device"David S. Miller2012-06-104-42/+7
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 59b9997baba5242997ddc7bd96b1391f5275a5a4 ] This reverts commit 8a83a00b0735190384a348156837918271034144. It causes regressions for S390 devices, because it does an unconditional DST drop on SKBs for vlans and the QETH device needs the neighbour entry hung off the DST for certain things on transmit. Arnd can't remember exactly why he even needed this change. Conflicts: drivers/net/macvlan.c net/8021q/vlan_dev.c net/core/dev.c Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* pktgen: fix module unload for goodEric Dumazet2012-06-101-2/+2
| | | | | | | | | | | | | | | | | | | [ Upstream commit d4b1133558e0d417342d5d2c49e4c35b428ff20d ] commit c57b5468406 (pktgen: fix crash at module unload) did a very poor job with list primitives. 1) list_splice() arguments were in the wrong order 2) list_splice(list, head) has undefined behavior if head is not initialized. 3) We should use the list_splice_init() variant to clear pktgen_threads list. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* pktgen: fix crash at module unloadEric Dumazet2012-06-101-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit c57b54684060c8aced64a5b78ff69ff289af97b9 ] commit 7d3d43dab4e9 (net: In unregister_netdevice_notifier unregister the netdevices.) makes pktgen crashing at module unload. [ 296.820578] BUG: spinlock bad magic on CPU#6, rmmod/3267 [ 296.820719] lock: ffff880310c38000, .magic: ffff8803, .owner: <none>/-1, .owner_cpu: -1 [ 296.820943] Pid: 3267, comm: rmmod Not tainted 3.4.0-rc5+ #254 [ 296.821079] Call Trace: [ 296.821211] [<ffffffff8168a715>] spin_dump+0x8a/0x8f [ 296.821345] [<ffffffff8168a73b>] spin_bug+0x21/0x26 [ 296.821507] [<ffffffff812b4741>] do_raw_spin_lock+0x131/0x140 [ 296.821648] [<ffffffff8169188e>] _raw_spin_lock+0x1e/0x20 [ 296.821786] [<ffffffffa00cc0fd>] __pktgen_NN_threads+0x4d/0x140 [pktgen] [ 296.821928] [<ffffffffa00ccf8d>] pktgen_device_event+0x10d/0x1e0 [pktgen] [ 296.822073] [<ffffffff8154ed4f>] unregister_netdevice_notifier+0x7f/0x100 [ 296.822216] [<ffffffffa00d2a0b>] pg_cleanup+0x48/0x73 [pktgen] [ 296.822357] [<ffffffff8109528e>] sys_delete_module+0x17e/0x2a0 [ 296.822502] [<ffffffff81699652>] system_call_fastpath+0x16/0x1b Hold the pktgen_thread_lock while splicing pktgen_threads, and test pktgen_exiting in pktgen_device_event() to make unload faster. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* l2tp: fix oops in L2TP IP sockets for connect() AF_UNSPEC caseJames Chapman2012-06-101-6/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit c51ce49735c183ef2592db70f918ee698716276b ] An application may call connect() to disconnect a socket using an address with family AF_UNSPEC. The L2TP IP sockets were not handling this case when the socket is not bound and an attempt to connect() using AF_UNSPEC in such cases would result in an oops. This patch addresses the problem by protecting the sk_prot->disconnect() call against trying to unhash the socket before it is bound. The patch also adds more checks that the sockaddr supplied to bind() and connect() calls is valid. RIP: 0010:[<ffffffff82e133b0>] [<ffffffff82e133b0>] inet_unhash+0x50/0xd0 RSP: 0018:ffff88001989be28 EFLAGS: 00010293 Stack: ffff8800407a8000 0000000000000000 ffff88001989be78 ffffffff82e3a249 ffffffff82e3a050 ffff88001989bec8 ffff88001989be88 ffff8800407a8000 0000000000000010 ffff88001989bec8 ffff88001989bea8 ffffffff82e42639 Call Trace: [<ffffffff82e3a249>] udp_disconnect+0x1f9/0x290 [<ffffffff82e42639>] inet_dgram_connect+0x29/0x80 [<ffffffff82d012fc>] sys_connect+0x9c/0x100 Reported-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipv6: fix incorrect ipsec fragmentGao feng2012-06-103-18/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 0c1833797a5a6ec23ea9261d979aa18078720b74 ] Since commit ad0081e43a "ipv6: Fragment locally generated tunnel-mode IPSec6 packets as needed" the fragment of packets is incorrect. because tunnel mode needs IPsec headers and trailer for all fragments, while on transport mode it is sufficient to add the headers to the first fragment and the trailer to the last. so modify mtu and maxfraglen base on ipsec mode and if fragment is first or last. with my test,it work well(every fragment's size is the mtu) and does not trigger slow fragment path. Changes from v1: though optimization, mtu_prev and maxfraglen_prev can be delete. replace xfrm mode codes with dst_entry's new frag DST_XFRM_TUNNEL. add fuction ip6_append_data_mtu to make codes clearer. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipv4: fix the rcu race between free_fib_info and ip_route_output_slowYanmin Zhang2012-06-101-7/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit e49cc0da7283088c5e03d475ffe2fdcb24a6d5b1 ] We hit a kernel OOPS. <3>[23898.789643] BUG: sleeping function called from invalid context at /data/buildbot/workdir/ics/hardware/intel/linux-2.6/arch/x86/mm/fault.c:1103 <3>[23898.862215] in_atomic(): 0, irqs_disabled(): 0, pid: 10526, name: Thread-6683 <4>[23898.967805] HSU serial 0000:00:05.1: 0000:00:05.2:HSU serial prevented me to suspend... <4>[23899.258526] Pid: 10526, comm: Thread-6683 Tainted: G W 3.0.8-137685-ge7742f9 #1 <4>[23899.357404] HSU serial 0000:00:05.1: 0000:00:05.2:HSU serial prevented me to suspend... <4>[23899.904225] Call Trace: <4>[23899.989209] [<c1227f50>] ? pgtable_bad+0x130/0x130 <4>[23900.000416] [<c1238c2a>] __might_sleep+0x10a/0x110 <4>[23900.007357] [<c1228021>] do_page_fault+0xd1/0x3c0 <4>[23900.013764] [<c18e9ba9>] ? restore_all+0xf/0xf <4>[23900.024024] [<c17c007b>] ? napi_complete+0x8b/0x690 <4>[23900.029297] [<c1227f50>] ? pgtable_bad+0x130/0x130 <4>[23900.123739] [<c1227f50>] ? pgtable_bad+0x130/0x130 <4>[23900.128955] [<c18ea0c3>] error_code+0x5f/0x64 <4>[23900.133466] [<c1227f50>] ? pgtable_bad+0x130/0x130 <4>[23900.138450] [<c17f6298>] ? __ip_route_output_key+0x698/0x7c0 <4>[23900.144312] [<c17f5f8d>] ? __ip_route_output_key+0x38d/0x7c0 <4>[23900.150730] [<c17f63df>] ip_route_output_flow+0x1f/0x60 <4>[23900.156261] [<c181de58>] ip4_datagram_connect+0x188/0x2b0 <4>[23900.161960] [<c18e981f>] ? _raw_spin_unlock_bh+0x1f/0x30 <4>[23900.167834] [<c18298d6>] inet_dgram_connect+0x36/0x80 <4>[23900.173224] [<c14f9e88>] ? _copy_from_user+0x48/0x140 <4>[23900.178817] [<c17ab9da>] sys_connect+0x9a/0xd0 <4>[23900.183538] [<c132e93c>] ? alloc_file+0xdc/0x240 <4>[23900.189111] [<c123925d>] ? sub_preempt_count+0x3d/0x50 Function free_fib_info resets nexthop_nh->nh_dev to NULL before releasing fi. Other cpu might be accessing fi. Fixing it by delaying the releasing. With the patch, we ran MTBF testing on Android mobile for 12 hours and didn't trigger the issue. Thank Eric for very detailed review/checking the issue. Signed-off-by: Yanmin Zhang <yanmin_zhang@linux.intel.com> Signed-off-by: Kun Jiang <kunx.jiang@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipv4: Do not use dead fib_info entries.David S. Miller2012-06-101-0/+2
| | | | | | | | | | | | | | [ Upstream commit dccd9ecc374462e5d6a5b8f8110415a86c2213d8 ] Due to RCU lookups and RCU based release, fib_info objects can be found during lookup which have fi->fib_dead set. We must ignore these entries, otherwise we risk dereferencing the parts of the entry which are being torn down. Reported-by: Yevgen Pronenko <yevgen.pronenko@sonymobile.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/ttm: Fix spinlock imbalanceThomas Hellstrom2012-06-101-0/+1
| | | | | | | | | | | | | commit a8ff3ee211fccf708e1911bbc096625453ebf759 upstream. This imbalance may cause hangs when TTM is trying to swap out a buffer that is already on the delayed delete list. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/radeon: fix HD6790, HD6570 backend programmingJerome Glisse2012-06-101-2/+2
| | | | | | | | | | | | | | | | | | | | commit 95c4b23ec4e2fa5604df229ddf134e31d7b3b378 upstream. Without this bit sets we get broken rendering and lockups. fglrx sets this bit. Bugs that should be fixed by this patch : https://bugs.freedesktop.org/show_bug.cgi?id=49792 https://bugzilla.kernel.org/show_bug.cgi?id=43207 https://bugs.freedesktop.org/show_bug.cgi?id=39282 Signed-off-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/radeon: properly program gart on rv740, juniper, cypress, barts, hemlockAlex Deucher2012-06-104-0/+9
| | | | | | | | | | | | | | commit 0b8c30bc4943137a4a36b9cb059b1cc684f5d702 upstream. Need to program an additional VM register. This doesn't not currently cause any problems, but allows us to program the proper backend map in a subsequent patch which should improve performance on these asics. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mtd: nand: fix scan_read_raw_oobDmitry Maluka2012-06-101-0/+1
| | | | | | | | | | | | | commit 34a5704d91d6f8376a4c0a0143a1dd3eb3ccb37e upstream. It seems there is a bug in scan_read_raw_oob() in nand_bbt.c which should cause wrong functioning of NAND_BBT_SCANALLPAGES option. Artem: the patch did not apply and I had to amend it a bit. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* vfs: umount_tree() might be called on subtree that had never made itAl Viro2012-06-101-1/+2
| | | | | | | | | | | | | commit 63d37a84ab6004c235314ffd7a76c5eb28c2fae0 upstream. __mnt_make_shortterm() in there undoes the effect of __mnt_make_longterm() we'd done back when we set ->mnt_ns non-NULL; it should not be done to vfsmounts that had never gone through commit_tree() and friends. Kudos to lczerner for catching that one... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: fix rate_list memory leakClemens Ladisch2012-06-101-0/+3
| | | | | | | | | | | | | commit 5cd5d7c44990658df6ab49f6253c39617c53b03d upstream. The array of sample rates is reallocated every time when opening the PCM device, but was freed only once when unplugging the device. Reported-by: "Alexander E. Patrakov" <patrakov@gmail.com> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Bluetooth: Add support for Foxconn/Hon Hai AR5BBU22 0489:E03CMichael Gruetzner2012-06-102-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 85d59726c5c66016a507f1f4a60db8e374dd284d upstream. Add Foxconn/Hon Hai AR5BBU22 Bluetooth Module( 0x489:0xE03C) to the blacklist of btusb module and add it to the ath3k module to properly load the firmware in Kernel 3.3.4 The device is integrated in e.g. some Acer Aspire 7750G. Output from /sys/kernel/debug/usb/devices: T: Bus=01 Lev=02 Prnt=02 Port=05 Cnt=02 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e03c Rev= 0.02 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Michael Gruetzner <mgruetzn@gmx.de> Signed-off-by: Gustavo Padovan <gustavo@padovan.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Add Foxconn / Hon Hai IDs for btusb moduleSteven Harms2012-06-101-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 985140369be1e886754d8ac0375dd64e4f727311 upstream. This change adds 0x0489:0xe033 to the btusb module. This bluetooth usb device is integrated in the Acer TimelineX AS4830TG-6808 notebook. Output from /sys/kernel/debug/usb/devices: T: Bus=01 Lev=02 Prnt=02 Port=05 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e033 Rev= 2.29 S: Manufacturer=Broadcom Corp S: Product=Acer Module S: SerialNumber=60D819F74101 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Steven Harms <sjharms@gmail.com> Signed-off-by: Gustavo Padovan <gustavo@padovan.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Bluetooth: btusb: typo in Broadcom SoftSailing idDon Zickus2012-06-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 2e8b506310f6433d5558387fd568d4bfb1d6a799 upstream. I was trying to backport the following commit to RHEL-6 From 0cea73465cd22373c5cd43a3edd25fbd4bb532ef Mon Sep 17 00:00:00 2001 From: Oliver Neukum <oliver@neukum.org> Date: Wed, 21 Sep 2011 11:37:15 +0200 Subject: [PATCH] btusb: add device entry for Broadcom SoftSailing and noticed it wasn't working on an HP Elitebook. Looking into the patch I noticed a very subtle typo in the ids. The patch has '0x05ac' instead of '0x0a5c'. A snippet of the lsusb -v output also shows this: Bus 002 Device 003: ID 0a5c:21e1 Broadcom Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 1 bDeviceProtocol 1 bMaxPacketSize0 64 idVendor 0x0a5c Broadcom Corp. idProduct 0x21e1 bcdDevice 1.12 iManufacturer 1 Broadcom Corp iProduct 2 BCM20702A0 iSerial 3 60D819F0338C bNumConfigurations 1 Looking at other Broadcom ids, the fix matches them whereas the original patch matches Apple's ids. Tested on an HP Elitebook 8760w. The btusb binds and the userspace stuff loads correctly. Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Don Zickus <dzickus@redhat.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Bluetooth: btusb: Add vendor specific ID (0489 e042) for BCM20702A0Manoj Iyer2012-06-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | commit 79cd76022044f8177bb00e3fd590ec8d6b5f8c35 upstream. T: Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e042 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=E4D53DCA61B5 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Reported-by: Dennis Chua <dennis.chua@canonical.com> Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Bluetooth: btusb: Add USB device ID "0a5c 21e8"João Paulo Rechi Vita2012-06-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | commit 6dfc326f0605fd87e4c10ccde10de0ce4280d72d upstream. One more vendor-specific ID for BCM20702A0. T: Bus=01 Lev=03 Prnt=05 Port=02 Cnt=01 Dev#= 9 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21e8 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=00027221F4E2 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: João Paulo Rechi Vita <jprvita@openbossa.org> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Bluetooth: btusb: add support for BCM20702A0 [0a5c:21e6]James M. Leddy2012-06-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 0a4eaeeb993658a4d6cff054a863241f32d3d2fb upstream. Add another vendor specific ID for BCM20702A0. This has been tested and works on hardware with this device. output of usb-devices: T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=04 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21e6 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=D0DF9AFB227B C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: James M. Leddy <james.leddy@canonical.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Bluetooth: btusb: Add vendor specific ID (0a5c 21f3) for BCM20702A0Manoj Iyer2012-06-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | commit 37305cf649689a4d2341dd6fd89b091c6007f9ba upstream. T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21f3 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=74DE2B344A7B C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com> Tested-by: Dennis Chua <dennis.chua@canonical.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Bluetooth: Add support for BCM20702A0 [0a5c:21e3]Jesse Sung2012-06-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | commit c0190925dacd976a67044f4382d4effbed568dce upstream. Add another vendor specific ID for BCM20702A0. output of usb-devices: T: Bus=06 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21e3 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=9439E5CBF66C C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Cc: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Bluetooth: Add support for Broadcom BCM20702A0Wen-chien Jesse Sung2012-06-101-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit d13431ca3eb2a2c14314f04813cdc11cd869f150 upstream. Since this device declares itself as vendor specific, must add a new entry to device ID table to support it. usb-device output of this device: T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=413c ProdID=8197 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=D0DF9AA9C9F1 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Cc: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/i915: wait for a vblank to pass after tv detectDaniel Vetter2012-06-101-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit bf2125e2f7e931b50a6c76ba0435ba001409ccbf upstream. Otherwise the hw will get confused and result in a black screen. This regression has been most likely introduce in commit 974b93315b2213b74a42a87e8a9d4fc8c0dbe90c Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Sun Sep 5 00:44:20 2010 +0100 drm/i915/tv: Poll for DAC state change That commit replace the first msleep(20) with a busy-loop, but failed to keep the 2nd msleep around. Later on we've replaced all these msleep(20) by proper vblanks. For reference also see the commit in xf86-video-intel: commit 1142be53eb8d2ee8a9b60ace5d49f0ba27332275 Author: Jesse Barnes <jbarnes@hobbes.lan> Date: Mon Jun 9 08:52:59 2008 -0700 Fix TV programming: add vblank wait after TV_CTL writes Fxies FDO bug #14000; we need to wait for vblank after writing TV_CTL or following "DPMS on" calls may not actually enable the output. v2: As suggested by Chris Wilson, add a small comment to ensure that no one accidentally removes this vblank wait again - there really seems to be no sane explanation for why we need it, but it is required. Launchpad: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/763688 Reported-and-Tested-by: Robert Lowery <rglowery@exemail.com.au> Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/i915: properly handle interlaced bit for sdvo dtd conversionDaniel Vetter2012-06-102-4/+13
| | | | | | | | | | | | | | | | | | | commit 59d92bfa5f0cdf57f82f5181b0ad6af75c3fdf41 upstream. We've simply ignored this, which isn't too great. With this, interlaced 1080i works on my HDMI screen connected through sdvo. For no apparent reason anything else still doesn't work as it should. While at it, give these magic numbers in the dtd proper names and add a comment that they match with EDID detailed timings. v2: Actually use the right bit for interlaced. Tested-by: Peter Ross <pross@xvid.org> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/radeon: fix XFX quirkAlex Deucher2012-06-101-1/+3
| | | | | | | | | | | | | | | | | commit 1ebf169ad4dc68f18cc0dab35163b0f324fc6c41 upstream. Only override the ddc bus if the connector doesn't have a valid one. The existing code overrode the ddc bus for all connectors even if it had ddc bus. Fixes ddc on another XFX card with the same pci ids that was broken by the quirk overwriting the correct ddc bus. Reported-by: Mehdi Aqadjani Memar <m.aqadjanimemar@student.ru.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* NFSv4: Map NFS4ERR_SHARE_DENIED into an EACCES error instead of EIOTrond Myklebust2012-06-101-0/+2
| | | | | | | | | | | | | | | commit fb13bfa7e1bcfdcfdece47c24b62f1a1cad957e9 upstream. If a file OPEN is denied due to a share lock, the resulting NFS4ERR_SHARE_DENIED is currently mapped to the default EIO. This patch adds a more appropriate mapping, and brings Linux into line with what Solaris 10 does. See https://bugzilla.kernel.org/show_bug.cgi?id=43286 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mac80211: fix ADDBA declined after suspend with wowlanEyal Shapira2012-06-101-6/+6
| | | | | | | | | | | | | | | commit 7b21aea04d084916ac4e0e8852dcc9cd60ec0d1d upstream. WLAN_STA_BLOCK_BA is set while suspending but doesn't get cleared when resuming in case of wowlan. This causes further ADDBA requests received to be rejected. Fix it by clearing it in the wowlan path as well. Signed-off-by: Eyal Shapira <eyal@wizery.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* solos-pci: Fix DMA supportDavid Woodhouse2012-06-101-1/+3
| | | | | | | | | | | | | | | | | | | | | commit b4bd8ad9bb311e8536f726f7a633620ccd358cde upstream. DMA support has finally made its way to the top of the TODO list, having realised that a Geode using MMIO can't keep up with two ADSL2+ lines each running at 21Mb/s. This patch fixes a couple of bugs in the DMA support in the driver, so once the corresponding FPGA update is complete and tested everything should work properly. We weren't storing the currently-transmitting skb, so we were never unmapping it and never freeing/popping it when the TX was done. And the addition of pci_set_master() is fairly self-explanatory. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* PARISC: fix TLB fault path on PA2.0 narrow systemsJames Bottomley2012-06-101-13/+17
| | | | | | | | | | | | | | | | | | | | | commit 2f649c1f6f0fef445ce79a19b79e5ce8fe9d7f19 upstream. commit 5e185581d7c46ddd33cd9c01106d1fc86efb9376 Author: James Bottomley <JBottomley@Parallels.com> [PARISC] fix PA1.1 oops on boot Didn't quite fix the crash on boot. It moved it from PA1.1 processors to PA2.0 narrow kernels. The final fix is to make sure the [id]tlb_miss_20 paths also work. Even on narrow systems, these paths require using the wide instructions becuase the tlb insertion format is wide. Fix this by conditioning the dep[wd],z on whether we're being called from _11 or _20[w] paths. Tested-by: Helge Deller <deller@gmx.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* PARISC: fix boot failure on 32-bit systems caused by branch stubs placed ↵John David Anglin2012-06-101-2/+4
| | | | | | | | | | | | | | | | | before .text commit ed5fb2471b7060767957fb964eb1aaec71533ab1 upstream. In certain configurations, the resulting kernel becomes too large to boot because the linker places the long branch stubs for the merged .text section at the very start of the image. As a result, the initial transfer of control jumps to an unexpected location. Fix this by placing the head text in a separate section so the stubs for .text are not at the start of the image. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cifs: fix oops while traversing open file list (try #4)Shirish Pargaonkar2012-06-102-24/+34
| | | | | | | | | | | | | | | | | | | | | | commit 2c0c2a08bed7a3b791f88d09d16ace56acb3dd98 upstream. While traversing the linked list of open file handles, if the identfied file handle is invalid, a reopen is attempted and if it fails, we resume traversing where we stopped and cifs can oops while accessing invalid next element, for list might have changed. So mark the invalid file handle and attempt reopen if no valid file handle is found in rest of the list. If reopen fails, move the invalid file handle to the end of the list and start traversing the list again from the begining. Repeat this four times before giving up and returning an error if file reopen keeps failing. Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: update BT traffic load states correctlyMeenakshi Venkataraman2012-06-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | commit 882dde8eb0d49ce0f853f8f4084dde56a21fe55f upstream. When BT traffic load changes from its previous state, a new LQ command needs to be sent down to the firmware. This needs to be done only once per change. The state variable that keeps track of this change is last_bt_traffic_load. However, it was not being updated when the change had been handled. Not updating this variable was causing a flood of advanced BT config commands to be sent to the firmware. Fix this. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.1 at 2025-02-05 07:29:58 +0000