aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/i915/intel_tv.c
Commit message (Collapse)AuthorAgeFilesLines
* drm/i915: wait for a vblank to pass after tv detectDaniel Vetter2012-06-101-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit bf2125e2f7e931b50a6c76ba0435ba001409ccbf upstream. Otherwise the hw will get confused and result in a black screen. This regression has been most likely introduce in commit 974b93315b2213b74a42a87e8a9d4fc8c0dbe90c Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Sun Sep 5 00:44:20 2010 +0100 drm/i915/tv: Poll for DAC state change That commit replace the first msleep(20) with a busy-loop, but failed to keep the 2nd msleep around. Later on we've replaced all these msleep(20) by proper vblanks. For reference also see the commit in xf86-video-intel: commit 1142be53eb8d2ee8a9b60ace5d49f0ba27332275 Author: Jesse Barnes <jbarnes@hobbes.lan> Date: Mon Jun 9 08:52:59 2008 -0700 Fix TV programming: add vblank wait after TV_CTL writes Fxies FDO bug #14000; we need to wait for vblank after writing TV_CTL or following "DPMS on" calls may not actually enable the output. v2: As suggested by Chris Wilson, add a small comment to ensure that no one accidentally removes this vblank wait again - there really seems to be no sane explanation for why we need it, but it is required. Launchpad: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/763688 Reported-and-Tested-by: Robert Lowery <rglowery@exemail.com.au> Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/i915: Fix TV Out refresh rate.Rodrigo Vivi2012-02-131-8/+8
| | | | | | | | | | | | | | commit 23bd15ec662344dc10e9918fdd0dbc58bc71526d upstream. TV Out refresh rate was half of the specification for almost all modes. Due to this reason pixel clock was so low for some modes causing flickering screen. Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/i915: Don't store temporary load-detect variables in the generic encoderChris Wilson2011-05-101-4/+5
| | | | | | | | | | | Keep all the state required for undoing and restoring the previous pipe configuration together in a single struct passed from intel_get_load_detect_pipe() to intel_release_load_detect_pipe() rather than stuffing them inside the common encoder structure. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com>
* drm/i915: Simplify return value from intel_get_load_detect_pipeChris Wilson2011-05-101-4/+2
| | | | | | | | | | ... and so remove the confusion as to whether to use the returned crtc or intel_encoder->base.crtc with the subsequent load-detection. Even though they were the same, the two instances of load-detection code disagreed over which was the more correct. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com>
* drm/i915/tv: Fix modeset flickering introduced in 7f58aabc3Sitsofe Wheeler2011-04-121-2/+2
| | | | | | | | | | | | | | | | The tidy ups in 7f58aabc369014fda3a4a33604ba0a1b63b941ac ("drm/i915: cleanup per-pipe reg usage") changed intel_crtc->plane to intel_crtc->pipe in intel_tv_mode_set(). This caused the screen to quickly turn off before returning whenever modesetting/mode probing took place on my 915GM EeePC 900 creating a flickering effect. This patch changes intel_crtc->pipe back to intel_crtc->plane which solves the problem for me. References: https://bugs.freedesktop.org/show_bug.cgi?id=35903 Signed-off-by: Sitsofe Wheeler <sitsofe@yahoo.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Humbly-acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
* drm/i915/tv: Only poll for TV connectionsMathew McKernan2011-04-121-2/+1
| | | | | | | | | | | | | As a probe for a TV connection modifies the TV_CTL register, it causes a loss of sync and a regular glitch on the output. This is highly undesirable when using the TV, so only poll for TV connections and wait for an explicit query for detecting the disconnection event. Reported-by: Mathew McKernan <matmckernan@rauland.com.au> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=35977 Signed-off-by: Mathew McKernan <matmckernan@rauland.com.au> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com>
* drm/i915/tv: Remember the detected TV typeMathew McKernan2011-04-121-0/+2
| | | | | | | | | | | | | | | | | | During detect() we would probe the connection bits to determine if there was a TV attached, and what video input type (Component, S-Video, Composite, etc) to use. However, we promptly discarded this vital bit of information and never propagated it to where it was used to determine the correct modes and setup the control registers. Fix it! This fixes a regression from 7b334fcb45b757ffb093696ca3de1b0c8b4a33f1. Reported-and-tested-by: Mathew McKernan <matmckernan@rauland.com.au> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=35977 Signed-off-by: Mathew McKernan <matmckernan@rauland.com.au> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Acked-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Keith Packard <keithp@keithp.com>
* Merge branch 'drm-intel-fixes' into drm-intel-nextChris Wilson2011-02-161-13/+30
|\ | | | | | | | | | | | | | | | | Grab the latest stabilisation bits from -fixes and some suspend and resume fixes from linus. Conflicts: drivers/gpu/drm/i915/i915_drv.h drivers/gpu/drm/i915/i915_irq.c
| * drm/i915/tv: Use polling rather than interrupt-based hotplugChris Wilson2011-02-111-13/+30
| | | | | | | | | | | | | | | | | | | | | | | | The documentation recommends that we should use a polling method for TV detection as this is more power efficient than the interrupt based mechanism (as the encoder can be completely switched off). A secondary effect is that leaving the hotplug enabled seems to be causing pipe underruns as reported by Hugh Dickins on his Crestline. Tested-by: Hugh Dickins <hughd@google.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [This is a candidate for stable, but needs minor porting to 2.6.37]
* | drm/i915: cleanup per-pipe reg usageJesse Barnes2011-02-071-6/+4
|/ | | | | | | | | | | | | We had some conversions over to the _PIPE macros, but didn't get everything. So hide the per-pipe regs with an _ (still used in a few places for legacy) and add a few _PIPE based macros, then make sure everyone uses them. [update: remove usage of non-existent no-op macro] [update 2: keep modesetting suspend/resume code, update to new reg names] Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [ickle: stylistic cleanups for checkpatch and taste] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
* drm/i915: Implement GPU semaphores for inter-ring synchronisation on SNBChris Wilson2010-12-051-6/+8
| | | | | | | | The bulk of the change is to convert the growing list of rings into an array so that the relationship between the rings and the semaphore sync registers can be easily computed. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
* Merge branch 'drm-intel-fixes' into drm-intel-nextChris Wilson2010-10-031-1/+1
|\ | | | | | | | | | | | | Conflicts: drivers/gpu/drm/i915/i915_gem_evict.c drivers/gpu/drm/i915/intel_display.c drivers/gpu/drm/i915/intel_dp.c
* | drm/i915/tv: Sleep before checking for state changes.Chris Wilson2010-09-231-2/+5
| | | | | | | | | | | | | | | | We need to wait for the PLLs to settle prior to detecting the state changes. The BIOS writers guide suggests waiting for the next vblank. Reported-by: Carlos R. Mafra <crmafra2@gmail.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
* | drm/i915: INTEL_INFO->gen supercedes i8xx, i9xx, i965gChris Wilson2010-09-211-2/+2
| | | | | | | | | | | | | | Avoid confusion between i965g meaning broadwater and the gen4+ chipset families. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
* | Merge branch 'drm-intel-fixes' into HEADChris Wilson2010-09-211-6/+5
|\ \ | |/ | | | | | | | | Conflicts: drivers/char/agp/intel-agp.c drivers/gpu/drm/i915/intel_crt.c
| * drm: Use a nondestructive mode for output detect when polling (v2)Chris Wilson2010-09-141-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | v2: Julien Cristau pointed out that @nondestructive results in double-negatives and confusion when trying to interpret the parameter, so use @force instead. Much easier to type as well. ;-) And fix the miscompilation of vmgfx reported by Sedat Dilek. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
| * drm: Use a nondestructive mode for output detect when pollingChris Wilson2010-09-131-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Destructive load-detection is very expensive and due to failings elsewhere can trigger system wide stalls of up to 600ms. A simple first step to correcting this is not to invoke such an expensive and destructive load-detection operation automatically. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29536 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16265 Reported-by: Bruno Prémont <bonbons@linux-vserver.org> Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
* | drm/i915: Use macros to switch between equivalent pipe registersChris Wilson2010-09-111-1/+1
| | | | | | | | | | | | | | | | | | | | The purpose is to make the code much easier to read and therefore reduce the possibility for bugs. A side effect is that it also makes it much easier for the compiler, reducing the object size by 4k -- from just a few functions! Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
* | drm/i915: Make the connector->encoder relationship explicitChris Wilson2010-09-091-17/+17
| | | | | | | | | | | | | | | | | | Currently we have a exact mapping of a connector onto an encoder for its whole lifetime. Make this an explicit property of the structure and so simplify the code. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | drm/i915: Rename intel_encoder->enc to base for consistencyChris Wilson2010-09-091-7/+8
| | | | | | | | | | | | | | | | [Patch is slightly larger than is strictly necessary to fixup surrounding checkpatch.pl errors.] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | drm/i915/tv: After disabling the pipe, use wait_for_vblank_off()Chris Wilson2010-09-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Hopefully this is a contributing factor to the spurious TV detection repoted by Ivan Bulatovic and others. References: Bug 16871 - "TV1 connected" with no tv https://bugzilla.kernel.org/show_bug.cgi?id=16871 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reported-by: Ivan Bulatovic <combuster@gmx.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
* | drm/i915/tv: Mark the format names as constant and so avoid the memleakChris Wilson2010-09-081-19/+17
| | | | | | | | Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
* | drm/i915/tv: Poll for DAC state changeChris Wilson2010-09-081-40/+33
| | | | | | | | | | | | | | | | Instead of sleeping for an arbitrary length of time (the documentation fails to specify how long to wait for) wait until the load detection has changed state (or at most the 20ms as before). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
* | drm/i915/tv: Preserve reserved DAC bits during mode-settingChris Wilson2010-09-081-1/+1
|/ | | | Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
* i915: Fix spurious TV detection after 9d0498a2bf + 9559fcdbffPekka Enberg2010-09-061-3/+6
| | | | | | | | | Partial revert of 9d0498a2bf. Signed-off-by: Pekka Enberg <penberg@kernel.org> Tested-by: Hugh Dickins <hughd@google.com> Tested-by: Sven Joachim <svenjoac@gmx.de> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
* drm/i915: wait for actual vblank, not just 20msJesse Barnes2010-08-211-4/+5
| | | | | | | | | | | | | | Waiting for a hard coded 20ms isn't always enough to make sure a vblank period has actually occurred, so add code to make sure we really have passed through a vblank period (or that the pipe is off when disabling). This prevents problems with mode setting and link training, and seems to fix a bug like https://bugs.freedesktop.org/show_bug.cgi?id=29278, but on an HP 8440p instead. Hopefully also fixes https://bugs.freedesktop.org/show_bug.cgi?id=29141. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: Subclass intel_encoder.Chris Wilson2010-08-091-79/+71
| | | | | | | | | | Subclass intel_encoder to reduce the pointer dance through intel_encoder->dev_priv. 10 files changed, 896 insertions(+), 997 deletions(-) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
* Merge branch 'drm-core-next' of ↵Linus Torvalds2010-08-051-7/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (204 commits) agp: intel-agp: do not use PCI resources before pci_enable_device() agp: efficeon-agp: do not use PCI resources before pci_enable_device() drm: kill BKL from common code drm/kms: Simplify setup of the initial I2C encoder config. drm,io-mapping: Specify slot to use for atomic mappings drm/radeon/kms: only expose underscan on avivo chips drm/radeon: add new pci ids drm: Cleanup after failing to create master->unique and dev->name drm/radeon: tone down overchatty acpi debug messages. drm/radeon/kms: enable underscan option for digital connectors drm/radeon/kms: fix calculation of h/v scaling factors drm/radeon/kms/igp: sideport is AMD only drm/radeon/kms: handle the case of no active displays properly in the bandwidth code drm: move ttm global code to core drm drm/i915: Clear the Ironlake dithering flags when the pipe doesn't want it. drm/radeon/kms: make sure HPD is set to NONE on analog-only connectors drm/radeon/kms: make sure rio_mem is valid before unmapping it drm/agp/i915: trim stolen space to 32M drm/i915: Unset cursor if out-of-bounds upon mode change (v4) drm/i915: Unreference object not handle on creation ...
| * drm/i915: cleanup: use ARRAY_SIZE()Dan Carpenter2010-08-011-6/+4
| | | | | | | | | | | | | | | | | | NUM_TV_MODES is the same as ARRAY_SIZE(tv_modes). In the end, I decided it was cleaner to remove NUM_TV_MODES and just use ARRAY_SIZE(tv_modes) through out. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net>
| * drm/i915: Sparse warning about invalid value for burst_ena in tv_modesChris Wilson2010-08-011-1/+1
| | | | | | | | | | | | | | | | drivers/gpu/drm/i915/intel_tv.c|479 col 16| warning: cast truncates bits from constant value (8 becomes 0) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
* | drm: i915: use ARRAY_SIZEKulikov Vasiliy2010-07-201-1/+1
|/ | | | | | | Change sizeof(x) / sizeof(*x) to ARRAY_SIZE(x). Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* Revert "drm/i915: Configure the TV sense state correctly on GM45 to make TV ↵Dave Airlie2010-04-201-9/+0
| | | | | | | | | | | detection reliable" Eric mentioned on irc this patch was bad, so revert it. This reverts commit fb8b5a39b6310379d7b54c0c7113703a8eaf4a57. Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/i915: convert TV driver to new encoder/connector structureZhenyu Wang2010-04-121-14/+26
| | | | Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
* drm/i915: Remove dead KMS encoder save/restore code.Eric Anholt2010-04-121-139/+0
| | | | | | | This was brought over from UMS, and used for a while until we decided that drm_helper_resume_force_mode was easier and more reliable, since it didn't require duplicating all the code deleted here. We just forgot to delete all that junk for a while.
* drm/i915: passing drm connector param for load detectionZhenyu Wang2010-04-091-2/+4
| | | | | | | | | | | In load detection, connector's encoder assignment must be kept consistent for proper mode setting, and this makes connector as explicit parameter for load detect function to not require single data structure to hold both encoder and connector reference, ease the transition for splitted encoder/connector model. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: Configure the TV sense state correctly on GM45 to make TV ↵Zhao Yakui2010-04-091-0/+9
| | | | | | | | | | | | | | | | | | | | | | detection reliable The TV detection logic is not reliable on the Cantiga platform. Sometimes the TV will be misdetected as the following two cases: - TV is misdetected on some laptops. e.g. There is no TV connector port or no TV is attached. But the TV is shown as connected. - TV connector type is misdetected. e.g. the component TV is attached, but the TV is shown as S-video type. According to the hardware requirement, the TV sense state bits of TV DAC register should be cleared to zero on Cantiga platfrom. https://bugzilla.kernel.org/show_bug.cgi?id=14792 Cc: Stable Team <stable@kernel.org> Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Tested-by: Santi <santi@agolina.net> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: Rename intel_output to intel_encoder.Eric Anholt2010-03-251-48/+48
| | | | | | | | | | | | | | | | | | The intel_output naming is inherited from the UMS code, which had a structure of screen -> CRTC -> output. The DRM code has an additional notion of encoder/connector, so the structure is screen -> CRTC -> encoder -> connector. This is a useful structure for SDVO encoders which can support multiple connectors (each of which requires different programming in the one encoder and could be connected to different CRTCs), or for DVI-I, where multiple encoders feed into the connector for whether it's used for digital or analog. Most of our code is encoder-related, so transition it to talking about encoders before we start trying to distinguish connectors. This patch is produced by sed s/intel_output/intel_encoder/ over the driver. Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: disable TV hotplug status checkZhenyu Wang2010-01-071-2/+0
| | | | | | | | As we removed TV hotplug, don't check its status ever. Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: only enable hotplug for detected outputsJesse Barnes2009-12-161-0/+2
| | | | | | | | | | | | This patch changes around our hotplug enable code a bit to only enable it for ports we actually detect and initialize. This prevents problems with stuck or spurious interrupts on outputs that aren't actually wired up, and is generally more correct. Fixes FDO bug #23183. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: Declare the new VBT parsing functions as staticZhao Yakui2009-12-011-1/+1
| | | | | Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: Don't set up the TV port if it isn't in the BIOS table.Zhao Yakui2009-11-301-0/+39
| | | | | Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: Avoid NULL dereference with component_only tv_modesChris Wilson2009-11-301-7/+4
| | | | | | | | | | | | | | | | | | | In commit d2d9f2324, the guard for a valid video mode was removed. This caused the regression: kernel crash during kms graphic boot on Intel GM4500 platform https://bugzilla.redhat.com/show_bug.cgi?id=540218 This patches changes the logic slightly not to rely on a coupled variable, but to just check whether the video_modes is valid before dereferencing. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Zhenyu Wang <zhenyu.z.wang@intel.com> [ickle: Actually reference the correct bug report] Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: Replace DRM_DEBUG with DRM_DEBUG_KMSZhao Yakui2009-11-051-4/+4
| | | | | | | Replace the DRM_DEBUG with DRM_DEBUG_KMS in output device code. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: Multiply the refresh by 1000 in TV mode validatiionZhao Yakui2009-10-021-1/+2
| | | | | | | | | | | As of 559ee21d261a54c42594ef9405d27e9008eedf44 the actual refresh rate is returned by the function of drm_mode_vrefresh, so multiply the refresh rate by 1000 in TV mode validation. At the same time the error is expanded from 10 to 1000. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* Merge branch 'drm-linus' of ↵Linus Torvalds2009-09-211-0/+30
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (133 commits) drm/vgaarb: add VGA arbitration support to the drm and kms. drm/radeon: some r420s have a CP race with the DMA engine. drm/radeon/r600/kms: rv670 is not DCE3 drm/radeon/kms: r420 idle after programming GA_ENHANCE drm/radeon/kms: more fixes to rv770 suspend/resume path. drm/radeon/kms: more alignment for rv770.c with r600.c drm/radeon/kms: rv770 blit init called too late. drm/radeon/kms: move around new init path code to avoid posting at init drm/radeon/r600: fix some issues with suspend/resume. drm/radeon/kms: disable VGA rendering engine before taking over VRAM drm/radeon/kms: Move radeon_get_clock_info() call out of radeon_clocks_init(). drm/radeon/kms: add initial connector properties drm/radeon/kms: Use surfaces for scanout / cursor byte swapping on big endian. drm/radeon/kms: don't fail if we fail to init GPU acceleration drm/r600/kms: fixup number of loops per blit calculation. drm/radeon/kms: reprogram format in set base. drm/radeon: avivo chips have no separate int bit for display drm/radeon/r600: don't do interrupts drm: fix _DRM_GEM addmap error message drm: update crtc x/y when only fb changes ... Fixed up trivial conflicts in firmware/Makefile due to network driver (cxgb3) and drm (mga/r128/radeon) firmware being listed next to each other.
| * drm/i915: select TV format according to connector typeMa Ling2009-09-041-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | For integrated TV there are 3 connector types: S-VIDEO, Composite and Component(YprPb). Those tv formats whose component flag is true should be assigned to Component connector, others are for S-VIDEO and Composite. The patch intends to find appropriate tv format for each connector. In such case it will return the correct modeline to user space. Otherwise it will return the incorrect modeline when S-video/composite is connected. Signed-off-by: Ma Ling <ling.ma@intel.com> reviewed-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* | drm/i915: fix mask bits settingZhenyu Wang2009-09-081-0/+1
|/ | | | | | | | | | | | | eDP is exclusive connector too, and add missing crtc_mask setting for TV. This fixes http://bugzilla.kernel.org/show_bug.cgi?id=14139 Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Reported-and-tested-by: Carlos R. Mafra <crmafra2@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drm/i915: Set crtc/clone mask in different output devicesMa Ling2009-08-241-0/+2
| | | | | | | | | | | | | | | | | Based on Bspec each encoder has different sharing pipe property, i.e. Integrated or SDVO TV both will occupy one pipe exclusively, and sdvo-non-tv and crt are allowed to share one. The patch moves sharing judgment into differnet output functions, and sets the right clone bit. This fixes both HDMI outputs choosing the same pipe. https://bugs.freedesktop.org/show_bug.cgi?id=22247 Signed-off-by: Ma Ling <ling.ma@intel.com> Reviewed-by : Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: Set preferred mode for integrated TV according to TV formatling.ma@intel.com2009-07-291-0/+22
| | | | | | | | | In order to get best possible quality image we chose 640x480 for NTSC, PAL and 480p, 1280x720 for 720p, 1920x1080 for 1080i/p TV format respectively. Signed-off-by: Ma Ling <ling.ma@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: set TV detection mode when tv is already connectedling.ma@intel.com2009-06-221-28/+25
| | | | | | | | | | | | We used load_detect_temp flag to determine whether to set tv to the test mode. However if the TV already has a mode set, we still need to set the test mode to determine connection. This results in blinking, but there is no other reliable way to determine TV connection. freedesktop.org bug #22035 Signed-off-by: Ma Ling <ling.ma@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
generated by cgit v1.1 at 2025-01-27 04:25:06 +0000