aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/ehci-hub.c
Commit message (Collapse)AuthorAgeFilesLines
* USB: EHCI: fix remote-wakeup regressionAlan Stern2008-05-291-2/+4
| | | | | | | | | | | | | | | | This patch (as1097) fixes a bug in the remote-wakeup handling in ehci-hcd. The driver currently does not keep track of whether the change-suspend feature is enabled for each port; the feature is automatically reset the first time it is read. But recent changes to the hub driver require that the feature be read at least twice in order to work properly. A bit-vector is added for storing the change-suspend feature values. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI: suppress unwanted error messagesAlan Stern2008-05-291-0/+10
| | | | | | | | | | | | | | | | | This patch (as1096) fixes an annoying problem: When a full-speed or low-speed device is plugged into an EHCI controller, it fails to enumerate at high speed and then is handed over to the companion controller. But usbcore logs a misleading and unwanted error message when the high-speed enumeration fails. The patch adds a new HCD method, port_handed_over, which asks whether a port has been handed over to a companion controller. If it has, the error message is suppressed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: use get/put_unaligned_* helpersHarvey Harrison2008-04-291-1/+1
| | | | | | | | | | Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/usb annotations and fixesAl Viro2008-04-281-1/+1
| | | | | | | | | | | | * endianness annotations * endianness fixes * missing get_unaligned/put_unaligned It's pretty much all over the place, changes to different files are independent. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Serial-parts-Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* USB: fix compile problems in ehci-hcdAlan Stern2008-04-241-2/+2
| | | | | | | | | | | | | | | This patch (as1072) fixes some recently-introduced compile problems that show up in ehci-hcd when CONFIG_PM is turned off. PORT_WAKE_BITS needs to be defined always. ehci_port_power() is called during initialization by all the EHCI variants other than the PCI version, in which it is "defined but not used". So add a call to it. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: HCDs use the do_remote_wakeup flagAlan Stern2008-04-241-10/+7
| | | | | | | | | | | | | | | | | | | | | | | | When a USB device is suspended, whether or not it is enabled for remote wakeup depends on the device_may_wakeup() setting. The setting is then saved in the do_remote_wakeup flag. Later on, however, the device_may_wakeup() value can change because of user activity. So when testing whether a suspended device is or should be enabled for remote wakeup, we should always test do_remote_wakeup instead of device_may_wakeup(). This patch (as1076) makes that change for root hubs in several places. The patch also adjusts uhci-hcd so that when an autostopped controller is suspended, the remote wakeup setting agrees with the value recorded in the root hub's do_remote_wakeup flag. And the patch adjusts ehci-hcd so that wakeup events on selectively suspended ports (i.e., the bus itself isn't suspended) don't turn on the PME# wakeup signal. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ehci: minor cleanupsDavid Brownell2008-04-241-1/+1
| | | | | | | | | | Minor cleanups to the EHCI code: revision history is what source code repositories should have. Switch to a more standard way to kick in verbose debugging -- don't be EHCI-specific. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: remove CONFIG_USB_PERSIST settingAlan Stern2008-04-241-10/+1
| | | | | | | | | | | This patch (as1047) removes the USB_PERSIST Kconfig option, enabling it permanently. It also prevents the power/persist attribute from being created for hub devices; there's no point in having it since USB-PERSIST is always turned on for hubs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI: carry out port handover during each root-hub resumeAlan Stern2008-04-241-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1044) causes EHCI port handover for non-high-speed devices to occur during every root-hub resume, not just in cases where the controller lost power or was reset. This is necessary because: When some machines go into suspend, they remove power from on-board USB devices while retaining suspend current for USB controllers. The user might well unplug a USB device while the system is suspended and then plug it back in before resuming. A corresponding change is made to the core resume routine; now high-speed root hubs will always be resumed when the system wakes up, even if they were suspended before the system went to sleep. If this weren't done then EHCI port handover wouldn't work, since it is called when the EHCI root hub is resumed. Finally, a comment is added to the hub driver explaining the khubd has to be freezable; if it weren't frozen then it could interfere with port handover. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: another ehci_iaa_watchdog fixDavid Brownell2008-04-021-2/+3
| | | | | | | | | | | | | | | | This patch, suggested by Alan Stern, fixes the hung USB issues on my notebook from suspend/resume cycles. It does so by eliminating some confusion about the internal state machine associated with unlinking from the EHCI async schedule ring, which caused a recent regression: http://bugzilla.kernel.org/show_bug.cgi?id=10345 Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: ehci, remove false clear-reset pathDavid Brownell2008-02-011-5/+1
| | | | | | | | | | | | Some of the "EHCI ports reset forever" problems may be explained by code paths which wrongly flagged resets as complete. This removes two such paths; the ehci_hub_status_data() path should be the only one to have an effect, since it was already properly flagged on the other path. (Issue noted by Minhyoung Kim <a9a9@lge.com>.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI: add a short delay to the bus_suspend routineAlan Stern2008-02-011-0/+4
| | | | | | | | | | | This patch (as1031) adds a short delay to the bus-suspend routine in ehci-hcd. Without it some devices disconnect when they should suspend. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI: move del_timer_sync calls outside spinlocked regionAlan Stern2008-02-011-1/+2
| | | | | | | | | | | | | This patch (as1030b) moves a del_timer_sync() call outside the scope of a spinlock, where it could cause a deadlock, and adds a new del_timer_sync() call for the new IAA watchdog timer (it was omitted by mistake). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI: add separate IAA watchdog timerAlan Stern2008-02-011-1/+1
| | | | | | | | | | | | | | | | This patch (as1028) was mostly written by David Brownell; I made only a few changes (extra log info and a small bug fix -- which might account for why David's version had to be reverted). It adds a new watchdog timer to the ehci-hcd driver to be used exclusively for detecting lost or missing IAA notifications. Previously a shared timer had been used, which may have led to some problems as reported by Christian Hoffmann. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: force handover port to companion when hub_port_connect_change failsBalaji Rao2008-02-011-24/+44
| | | | | | | | | | This patch hands over the port to the companion when the hub_port_connect_change fails. Signed-off-by: Balaji Rao <balajirrao@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Convert from class_device to device for USB coreTony Jones2008-02-011-10/+13
| | | | | | | | | Convert from class_device to device for drivers/usb/core. Signed-off-by: Tony Jones <tonyj@suse.de> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Fix misspellings of "system", "controller", "interrupt" and "necessary".Robert P. J. Day2007-10-191-1/+1
| | | | | | | | Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
* USB: Don't resume root hub if the controller is suspendedAlan Stern2007-07-121-0/+4
| | | | | | | | | | | | | | | | | | | Root hubs can't be resumed if their parent controller device is still suspended. This patch (as925) adds a check for that condition in hcd_bus_resume() and prevents it from being treated as a fatal controller failure. ehci-hcd is updated to add the corresponding test. Unnecessary debugging messages are removed from uhci-hcd and dummy-hcd. The error return code from dummy-hcd is changed to -ESHUTDOWN, the same as the others. ohci-hcd doesn't need any changes. Suspend handling in the non-PCI host drivers is somewhat hit-and-miss. This patch shouldn't have any effect on them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ehci-hub: improved over-current recoveryChristian Engelmayer2007-07-121-1/+16
| | | | | | | | | | | | | | According to the USB Specification Revision 2.0 chapter 11.12.5 a hub experiencing an over-current condition must place all affected ports in the powered-off state. It seems that some root hubs need port power to be cycled by software in order to get back to normal functionality after an over-current condition ... like the EHCI implementation on an MPC8343E. Signed-off-by: Christian Engelmayer <christian.engelmayer@frequentis.com> Signed-off-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI: fix handover for designated full-speed portsAlan Stern2007-07-121-1/+3
| | | | | | | | | | | | This patch (as895) fixes up a loose end in the port-handover code for the USB-Persist facility. A special case occurs when a high-speed device is attached to a port which the user has designated to run at full-speed only; the port must be disabled before the handover can take place. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI, OHCI: handover changesAlan Stern2007-07-121-5/+94
| | | | | | | | | | | | | | | | | | | This patch (as887) changes the way ehci-hcd and ohci-hcd handle a loss of VBUS power during suspend. In order for the USB-persist facility to work correctly, it is necessary for low- and full-speed devices attached to a high-speed port to be handed back to the companion controller during resume processing. This entails three changes: adding code to ehci-hcd to perform the handover, removing code from ohci-hcd to turn off ports during root-hub reinit, and adding code to ohci-hcd to turn on ports during PCI controller resume. (Other bus glue resume methods for platforms supporting high-speed controllers would need a similar change, if any existed.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* EHCI: add delay to bus_resume before accessing portsAlan Stern2007-04-271-0/+4
| | | | | | | | | | | | This patch (as870) adds a delay to ehci-hcd's bus_resume routine. Apparently there are controllers and/or BIOSes out there which need such a delay to get the ports back into their correct state. This fixes Bugzilla #8190. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix Unaligned access in EHCI driverMax Dmitrichenko2007-03-091-2/+1
| | | | | | | | | | | | | | I get following warnings on spar64: Kernel unaligned access at TPC[1000c9e4] ehci_hub_control+0x54c/0x68c [ehci_hcd] Despite of the comment in the patched code, the type cast used there does make unaligned access. The fix was made as it's done in ohci-hub.c. Signed-off-by: Max Dmitrichenko <dmitrmax@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* EHCI: add debugging message to ehci_bus_suspendAlan Stern2007-02-161-0/+2
| | | | | | | | | | This patch (as848) adds a useful little debugging message to let us know when ehci-hcd's bus_suspend method runs. The other HCDs have similar messages; now ehci-hcd doesn't need to feel left out. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* EHCI: fix interrupt-driven remote wakeupAlan Stern2007-02-071-18/+32
| | | | | | | | | | | | | | | | | | | Now that port status change notifications are interrupt-driven, ehci-hcd needs to tell usbcore when a remote-wakeup resume operation is finished -- we can no longer rely on the core to poll and find out. This patch (as843) uses the root-hub status timer to force a poll after the resume is complete. The patch also changes the test for detecting when the TDRSMDN resume period has expired. It's necessary to use time_after_eq() instead of time_after(), since the polling is triggered precisely by a timer. The same change is made for TDRSTR reset expiration, for consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* EHCI: force high-speed devices to run at full speedAlan Stern2007-02-071-0/+107
| | | | | | | | | | | | | | | | | | | | This patch (as710) adds a sysfs class-device attribute file named "companion" for EHCI controllers. The file contains a list of port numbers that are dedicated to the companion controller; by writing a port number to the file the user can force a high-speed device attached directly to the computer to run at full speed. (As far as I know it is not possible to do this for a device attached to an external hub.) A port is removed from the file by writing the negative of its port number. Several users have asked for this facility and it seems like a useful thing to have. Every now and then one runs across a device which behaves much better at full speed than at high speed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* EHCI: don't hide ports owned by the companionAlan Stern2007-02-071-29/+35
| | | | | | | | | | | | | | This patch (as709) changes the way ehci-hcd presents port status values for ports owned by the companion controller. It no longer hides the information; in particular, it allows the core to see the disconnect event that occurs when a full- or low-speed device is switched over to the companion. This is required for the next patch in this series. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* EHCI: local variable for port status registerAlan Stern2007-02-071-31/+24
| | | | | | | | | | | | This patch (as708) introduces a local variable to hold the port status-register address in ehci-hub.c. There's not much improvement in the object code, but it sure is a lot easier to read. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Implement support for EHCI with big endian MMIOBenjamin Herrenschmidt2007-02-071-55/+63
| | | | | | | | | | | | | | | | | | This patch implements supports for EHCI controllers whose MMIO registers are big endian and enables that functionality for the Toshiba SCC chip. It does _not_ add support for big endian in-memory data structures as this is not needed for that chip and I hope it will never be. The guts of the patch are to convert readl(...) to ehci_readl(ehci, ...) and similarly for register writes. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* EHCI: Fix root-hub and port suspend/resume problemsAlan Stern2006-12-011-25/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as738b) fixes numerous problems in the controller/root-hub suspend/resume/remote-wakeup support in ehci-hcd: The bus_resume() routine should wake up only the ports that were suspended by bus_suspend(). Ports that were already suspended should remain that way. The interrupt mask is used to detect loss of power in the bus_resume() routine (if the mask is 0 then power was lost). However bus_suspend() always sets the mask to 0. Instead the mask should retain its normal value, with port-change-detect interrupts disabled if remote wakeup is turned off. The interrupt mask should be reset to its correct value at the end of bus_resume() regardless of whether power was lost. bus_resume() reinitializes the operational registers if power was lost. However those registers are not in the aux power well, hence they can lose their values whenever the controller is put into D3. They should always be reinitialized. When a port-change interrupt occurs and the root hub is suspended, the interrupt handler should request a root-hub resume instead of starting up the controller all by itself. There's no need for the interrupt handler to request a root-hub resume every time a suspended port sends a remote-wakeup request. The pci_resume() method doesn't need to check for connected ports when deciding whether or not to reset the controller. It can make that decision based on whether Vaux power was maintained. Even when the controller does not need to be reset, pci_resume() must undo the effect of pci_suspend() by re-enabling the interrupt mask. If power was lost, pci_resume() must not call ehci_run(). At this point the root hub is still supposed to be suspended, not running. It's enough to rewrite the command register and set the configured_flag. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: add ehci_hcd.ignore_oc parameterDavid Brownell2006-12-011-3/+15
| | | | | | | | | | | | | | | | | | | | | | Certain boards seem to like to issue false overcurrent notifications, for example on ports that don't have anything connected to them. This looks like a hardware error, at the level of noise to those ports' overcurrent input signals (or non-debounced VBUS comparators). This surfaces to users as truly massive amounts of syslog spam from khubd (which is appropriate for real hardware problems, except for the volume from multiple ports). Using this new "ignore_oc" flag helps such systems work more sanely, by preventing such indications from getting to khubd (and spam syslog). The downside is of course that true overcurrent errors will be masked; they'll appear as spontaneous disconnects, without the diagnostics that will let users troubleshoot issues like short circuited cables. Note that the bulk of these reports seem to be with VIA southbridges, but I think some were with Intel ones. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI hooks for high speed electrical testsDavid Brownell2006-12-011-0/+19
| | | | | | | | | | | | | | EHCI hooks for high speed electrical tests of the root hub ports. The expectation is that a usermode program actually triggers the test, making the same control request it would make for an external hub. Tests for peripheral upstream ports would issue a different request. In all cases, the hardware needs re-initialization before it could be used "normally" again (e.g. unplug/replug, rmmod/modprobe). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: revert EHCI VIA workaround patchGreg Kroah-Hartman2006-10-171-1/+1
| | | | | | | | This reverts 26f953fd884ea4879585287917f855c63c6b2666 which caused resume problems on the mac mini. Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells2006-10-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* USB: EHCI update VIA workaroundDavid Brownell2006-09-271-1/+1
| | | | | | | | | | | | | | This revamps handling of the hardware "async advance" IRQ, and its watchdog timer. Basically it dis-entangles that important timeout from the others, simplifying the associated state and code to make it more robust. This reportedly improves behavior of EHCI on some systems with VIA chips, and AFAIK won't affect non-VIA hardware. VIA systems need this code to recover from silcon bugs whereby the "async advance" IRQ isn't issued. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI whitespace fixes (cosmetic)David Brownell2006-09-271-6/+6
| | | | | | | | | | [ ... when you have an editor set to remind you of whitespace bugs ... ] Cosmetic EHCI changes: remove end-of-line whitespace, spaces before tabs. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: EHCI and NF2 quirkDavid Brownell2006-03-201-0/+4
| | | | | | | | | | | | | | | | | | This teaches the EHCI driver about a quirk seen in older NForce2 chips, adding a workaround to ignore selective suspend requests. Bus-wide (so-called "global") suspend still works, as does USB wakeup of a root hub that's globally suspended. There's still a hole in this support though. Strictly speaking, this should _fail_ selective suspend requests, rather than ignoring them, since doing it this way means that devices which should be able to issue remote wakeup are not going to be able to do that. For now, we'll just live with that problem ... since usbcore expects to do selective suspend on the way towards a full bus suspend, and usbcore needs to be able to do full bus suspend. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: EHCI updates (4/4) driver model wakeup flagsDavid Brownell2006-01-041-2/+2
| | | | | | | | | | | This teaches the EHCI driver to use the new driver model wakeup flags, replacing the similar ones in the HCD glue. It also adds a workaround for the current glitch whereby PCI init doesn't init the wakeup flags from the PCI PM capabilities. (EHCI controllers don't worry about legacy mode; the PCI PM capability would always do the job.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: EHCI updatesDavid Brownell2005-11-231-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | This fixes some bugs in EHCI suspend/resume that joined us over the past few releases (as usbcore, PCI, pmcore, and other components evolved): - Removes suspend and resume recursion from the EHCI driver, getting rid of the USB_SUSPEND special casing. - Updates the wakeup mechanism to work again; there's a newish usbcore call it needs to use. - Provide simpler tests for "do we need to restart from scratch", to address another case where PCI Vaux was lost. (In this case it was restoring a swsusp snapshot, but there could be others.) Un-exports a symbol that was temporarily exported. A notable change from previous version is that this doesn't move the spinlock init, so there's still a resume/reinit path bug. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] USB: Rename hcd->hub_suspend to hcd->bus_suspendAlan Stern2005-10-281-4/+4
| | | | | | | | | | | | | | | | This patch (as580) is perhaps the only result from the long discussion I had with David about his changes to the root-hub suspend/resume code. It renames the hub_suspend and hub_resume methods in struct usb_hcd to bus_suspend and bus_resume. These are more descriptive names, since the methods really do suspend or resume an entire USB bus, and less likely to be confused with the hub_suspend and hub_resume routines in hub.c. It also takes David's advice about removing the layer of bus glue, where those methods are called. And it implements a related change that David made to the other HCDs but forgot to put into dummy_hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: EHCI port tweaksDavid Brownell2005-09-121-11/+16
| | | | | | | | | | | | | | | | | | | | | | | | | One change may improve some S1 or S3 resume cases, and the other seems mostly to explain some strange state "lsusb" would show. Two fixes: - On resume, don't think about resuming any unpowered port, or resetting any port with OWNER set to the OHCI/UHCI companion. This will make some S1 and S3 resume scenarios work better. - PORT_CSC was not being cleared correctly in ehci_hub_status_data. This was visible at least through current versions of "lsusb", and might have caused some other hub related strangeness. The fix addresses all three write-to-clear bits, using the same approach that UHCI happens to use: a mask of bits that are cleared in most writes to that port status register. Original patch seems to have been from from William.Morrow@amd.com and this version (from David) finishes the write-to-clear changes. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: misc ehci updatesDavid Brownell2005-06-271-1/+1
| | | | | | | | | | | | | | | | | | | Various minor EHCI updates * Dump some more info in the debug dumps, notably the product description (e.g. chip vendor), BIOS handhake flags, and debug port status (when it's not managed by the HCD). * Minor updates to the BIOS handoff code: always flag the HCD as owned by Linux (in case BIOS doesn't grab it "early"), and on the buggy-BIOS path always match the "early handoff" code and forcibly disable SMI IRQs. * For the disabled 64bit DMA support, there's now a constant to use for the mask; use it. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] spin longer for ehci port reset completionDavid Brownell2005-06-131-1/+4
| | | | | | | | | | | | | | | This makes the EHCI driver spin a bit longer before concluding that the port reset failed. "Obviously safe." It allows some devices to enumerate that previously didn't. We've seen a bunch of these problem reports recently, this will make some go away. As reported by Michael Zapf <Michael.Zapf@uni-kassel.de>, some EHCI controllers seem to take forever to finish port resets and produce "port N reset error -110" type errors. Spinning a bit longer helps. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] USB: ehci suspend must stop timerDavid Brownell2005-05-161-0/+1
| | | | | | | | Force the EHCI watchdog timer off during suspend, in case for some reason it was still running after the root hub suspended. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] USB: ehci power fixesDavid Brownell2005-05-031-0/+2
| | | | | | | | | | | | | | | | | | Miscellaneous updates for EHCI. - Mostly updates the power switching on EHCI controllers. One routine centralizes the "power on/off all ports" logic, and the capability to do that is reported more correctly. - Courtesy Colin Leroy, a patch to always power up ports after resumes which didn't keep a USB device suspended. The reset-everything logic powers down those ports (on some hardware) so something needs to turn them back on. - Minor tweaks/bugfixes for the debug port support. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Linux-2.6.12-rc2Linus Torvalds2005-04-161-0/+553
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.1 at 2024-12-26 17:23:53 +0000