aboutsummaryrefslogtreecommitdiffstats
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* KVM: x86 emulator: lazily evaluate segment registersAvi Kivity2008-07-201-7/+3
| | | | | | | | Instead of prefetching all segment bases before emulation, read them at the last moment. Since most of them are unneeded, we save some cycles on Intel machines where this is a bit expensive. Signed-off-by: Avi Kivity <avi@qumranet.com>
* KVM: x86 emulator: simplify rip relative decodingAvi Kivity2008-07-201-0/+1
| | | | | | | | rip relative decoding is relative to the instruction pointer of the next instruction; by moving address adjustment until after decoding is complete, we remove the need to determine the instruction size. Signed-off-by: Avi Kivity <avi@qumranet.com>
* KVM: Support mixed endian machinesTan, Li2008-07-201-2/+2
| | | | | | | | | | | | Currently kvmtrace is not portable. This will prevent from copying a trace file from big-endian target to little-endian workstation for analysis. In the patch, kernel outputs metadata containing a magic number to trace log, and changes 64-bit words to be u64 instead of a pair of u32s. Signed-off-by: Tan Li <li.tan@intel.com> Acked-by: Jerone Young <jyoung5@us.ibm.com> Acked-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
* KVM: Add coalesced MMIO support (ia64 part)Laurent Vivier2008-07-201-0/+1
| | | | | | | | | | | | This patch enables coalesced MMIO for ia64 architecture. It defines KVM_MMIO_PAGE_OFFSET and KVM_CAP_COALESCED_MMIO. It enables the compilation of coalesced_mmio.c. [akpm: fix compile error on ia64] Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Avi Kivity <avi@qumranet.com>
* KVM: Add coalesced MMIO support (powerpc part)Laurent Vivier2008-07-201-0/+2
| | | | | | | | | This patch enables coalesced MMIO for powerpc architecture. It defines KVM_MMIO_PAGE_OFFSET and KVM_CAP_COALESCED_MMIO. It enables the compilation of coalesced_mmio.c. Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Avi Kivity <avi@qumranet.com>
* KVM: Add coalesced MMIO support (x86 part)Laurent Vivier2008-07-201-0/+1
| | | | | | | | | This patch enables coalesced MMIO for x86 architecture. It defines KVM_MMIO_PAGE_OFFSET and KVM_CAP_COALESCED_MMIO. It enables the compilation of coalesced_mmio.c. Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Avi Kivity <avi@qumranet.com>
* KVM: Add coalesced MMIO support (common part)Laurent Vivier2008-07-202-0/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds all needed structures to coalesce MMIOs. Until an architecture uses it, it is not compiled. Coalesced MMIO introduces two ioctl() to define where are the MMIO zones that can be coalesced: - KVM_REGISTER_COALESCED_MMIO registers a coalesced MMIO zone. It requests one parameter (struct kvm_coalesced_mmio_zone) which defines a memory area where MMIOs can be coalesced until the next switch to user space. The maximum number of MMIO zones is KVM_COALESCED_MMIO_ZONE_MAX. - KVM_UNREGISTER_COALESCED_MMIO cancels all registered zones inside the given bounds (bounds are also given by struct kvm_coalesced_mmio_zone). The userspace client can check kernel coalesced MMIO availability by asking ioctl(KVM_CHECK_EXTENSION) for the KVM_CAP_COALESCED_MMIO capability. The ioctl() call to KVM_CAP_COALESCED_MMIO will return 0 if not supported, or the page offset where will be stored the ring buffer. The page offset depends on the architecture. After an ioctl(KVM_RUN), the first page of the KVM memory mapped points to a kvm_run structure. The offset given by KVM_CAP_COALESCED_MMIO is an offset to the coalesced MMIO ring expressed in PAGE_SIZE relatively to the address of the start of th kvm_run structure. The MMIO ring buffer is defined by the structure kvm_coalesced_mmio_ring. [akio: fix oops during guest shutdown] Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Akio Takebe <takebe_akio@jp.fujitsu.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
* KVM: kvm_io_device: extend in_range() to manage len and write attributeLaurent Vivier2008-07-201-1/+2
| | | | | | | | | | Modify member in_range() of structure kvm_io_device to pass length and the type of the I/O (write or read). This modification allows to use kvm_io_device with coalesced MMIO. Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Avi Kivity <avi@qumranet.com>
* KVM: Prefixes segment functions that will be exported with "kvm_"Guillaume Thouvenin2008-07-201-0/+4
| | | | | | | | | | Prefixes functions that will be exported with kvm_. We also prefixed set_segment() even if it still static to be coherent. signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: Laurent Vivier <laurent.vivier@bull.net> Signed-off-by: Avi Kivity <avi@qumranet.com>
* KVM: MTRR supportAvi Kivity2008-07-201-0/+3
| | | | | | | Add emulation for the memory type range registers, needed by VMware esx 3.5, and by pci device assignment. Signed-off-by: Avi Kivity <avi@qumranet.com>
* KVM: Order segment register constants in the same way as cpu operand encodingAvi Kivity2008-07-201-2/+2
| | | | | | This can be used to simplify the x86 instruction decoder. Signed-off-by: Avi Kivity <avi@qumranet.com>
* KVM: VMX: Enable NMI with in-kernel irqchipSheng Yang2008-07-201-0/+1
| | | | | Signed-off-by: Sheng Yang <sheng.yang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
* KVM: IOAPIC/LAPIC: Enable NMI supportSheng Yang2008-07-202-0/+6
| | | | | | | [avi: fix ia64 build breakage] Signed-off-by: Sheng Yang <sheng.yang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
* KVM: Remove decache_vcpus_on_cpu() and related callbacksAvi Kivity2008-07-202-4/+0
| | | | | | Obsoleted by the vmx-specific per-cpu list. Signed-off-by: Avi Kivity <avi@qumranet.com>
* KVM: Handle virtualization instruction #UD faults during rebootAvi Kivity2008-07-201-0/+24
| | | | | | | | | | | | | | | KVM turns off hardware virtualization extensions during reboot, in order to disassociate the memory used by the virtualization extensions from the processor, and in order to have the system in a consistent state. Unfortunately virtual machines may still be running while this goes on, and once virtualization extensions are turned off, any virtulization instruction will #UD on execution. Fix by adding an exception handler to virtualization instructions; if we get an exception during reboot, we simply spin waiting for the reset to complete. If it's a true exception, BUG() so we can have our stack trace. Signed-off-by: Avi Kivity <avi@qumranet.com>
* KVM: MMU: Fix false flooding when a pte points to page tableAvi Kivity2008-07-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | The KVM MMU tries to detect when a speculative pte update is not actually used by demand fault, by checking the accessed bit of the shadow pte. If the shadow pte has not been accessed, we deem that page table flooded and remove the shadow page table, allowing further pte updates to proceed without emulation. However, if the pte itself points at a page table and only used for write operations, the accessed bit will never be set since all access will happen through the emulator. This is exactly what happens with kscand on old (2.4.x) HIGHMEM kernels. The kernel points a kmap_atomic() pte at a page table, and then proceeds with read-modify-write operations to look at the dirty and accessed bits. We get a false flood trigger on the kmap ptes, which results in the mmu spending all its time setting up and tearing down shadows. Fix by setting the shadow accessed bit on emulated accesses. Signed-off-by: Avi Kivity <avi@qumranet.com>
* KVM: SVM: add tracing support for TDP page faultsJoerg Roedel2008-07-201-0/+1
| | | | | | | | To distinguish between real page faults and nested page faults they should be traced as different events. This is implemented by this patch. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
* Merge branch 'upstream-linus' of ↵Linus Torvalds2008-07-171-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: [PATCH] ocfs2: fix oops in mmap_truncate testing configfs: call drop_link() to cleanup after create_link() failure configfs: Allow ->make_item() and ->make_group() to return detailed errors. configfs: Fix failing mkdir() making racing rmdir() fail configfs: Fix deadlock with racing rmdir() and rename() configfs: Make configfs_new_dirent() return error code instead of NULL configfs: Protect configfs_dirent s_links list mutations configfs: Introduce configfs_dirent_lock ocfs2: Don't snprintf() without a format. ocfs2: Fix CONFIG_OCFS2_DEBUG_FS #ifdefs ocfs2/net: Silence build warnings on sparc64 ocfs2: Handle error during journal load ocfs2: Silence an error message in ocfs2_file_aio_read() ocfs2: use simple_read_from_buffer() ocfs2: fix printk format warnings with OCFS2_FS_STATS=n [PATCH 2/2] ocfs2: Instrument fs cluster locks [PATCH 1/2] ocfs2: Add CONFIG_OCFS2_FS_STATS config option
| * configfs: Allow ->make_item() and ->make_group() to return detailed errors.Joel Becker2008-07-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The configfs operations ->make_item() and ->make_group() currently return a new item/group. A return of NULL signifies an error. Because of this, -ENOMEM is the only return code bubbled up the stack. Multiple folks have requested the ability to return specific error codes when these operations fail. This patch adds that ability by changing the ->make_item/group() ops to return an int. Also updated are the in-kernel users of configfs. Signed-off-by: Joel Becker <joel.becker@oracle.com>
* | Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds2008-07-171-1/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix asm/e820.h for userspace inclusion x86: fix numaq_tsc_disable x86: fix kernel_physical_mapping_init() for large x86 systems
| * | x86: fix asm/e820.h for userspace inclusionRusty Russell2008-07-171-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | asm-x86/e820.h is included from userspace. 'x86: make e820.c to have common functions' (b79cd8f1268bab57ff85b19d131f7f23deab2dee) broke it: make -C Documentation/lguest cc -Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include lguest.c -lz -o lguest In file included from ../../include/asm-x86/bootparam.h:8, from lguest.c:45: ../../include/asm/e820.h:66: error: expected ‘)’ before ‘start’ ../../include/asm/e820.h:67: error: expected ‘)’ before ‘start’ ../../include/asm/e820.h:68: error: expected ‘)’ before ‘start’ ../../include/asm/e820.h:72: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘e820_update_range’ ... Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | Merge branch 'ptrace-cleanup' of ↵Linus Torvalds2008-07-172-16/+14
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-utrace * 'ptrace-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-utrace: fix dangling zombie when new parent ignores children do_wait: return security_task_wait() error code in place of -ECHILD ptrace children revamp do_wait reorganization
| * | | ptrace children revampRoland McGrath2008-07-162-16/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ptrace no longer fiddles with the children/sibling links, and the old ptrace_children list is gone. Now ptrace, whether of one's own children or another's via PTRACE_ATTACH, just uses the new ptraced list instead. There should be no user-visible difference that matters. The only change is the order in which do_wait() sees multiple stopped children and stopped ptrace attachees. Since wait_task_stopped() was changed earlier so it no longer reorders the children list, we already know this won't cause any new problems. Signed-off-by: Roland McGrath <roland@redhat.com>
* | | | [S390] qdio: new qdio driver.Jan Glauber2008-07-172-335/+313
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | List of major changes: - split qdio driver into several files - seperation of thin interrupt code - improved handling for multiple thin interrupt devices - inbound and outbound processing now always runs in tasklet context - significant less tasklet schedules per interrupt needed - merged qebsm with non-qebsm handling - cleanup qdio interface and added kerneldoc - coding style Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Utz Bacher <utz.bacher@de.ibm.com> Reviewed-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
* | | | [S390] chsc headers userspace cleanupAdrian Bunk2008-07-173-4/+7
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | Kernel headers shouldn't expose functions to userspace. Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | | Merge branch 'linux-next' of ↵Linus Torvalds2008-07-1613-69/+394
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (72 commits) Revert "x86/PCI: ACPI based PCI gap calculation" PCI: remove unnecessary volatile in PCIe hotplug struct controller x86/PCI: ACPI based PCI gap calculation PCI: include linux/pm_wakeup.h for device_set_wakeup_capable PCI PM: Fix pci_prepare_to_sleep x86/PCI: Fix PCI config space for domains > 0 Fix acpi_pm_device_sleep_wake() by providing a stub for CONFIG_PM_SLEEP=n PCI: Simplify PCI device PM code PCI PM: Introduce pci_prepare_to_sleep and pci_back_from_sleep PCI ACPI: Rework PCI handling of wake-up ACPI: Introduce new device wakeup flag 'prepared' ACPI: Introduce acpi_device_sleep_wake function PCI: rework pci_set_power_state function to call platform first PCI: Introduce platform_pci_power_manageable function ACPI: Introduce acpi_bus_power_manageable function PCI: make pci_name use dev_name PCI: handle pci_name() being const PCI: add stub for pci_set_consistent_dma_mask() PCI: remove unused arch pcibios_update_resource() functions PCI: fix pci_setup_device()'s sprinting into a const buffer ... Fixed up conflicts in various files (arch/x86/kernel/setup_64.c, arch/x86/pci/irq.c, arch/x86/pci/pci.h, drivers/acpi/sleep/main.c, drivers/pci/pci.c, drivers/pci/pci.h, include/acpi/acpi_bus.h) from x86 and ACPI updates manually.
| * | | PCI: include linux/pm_wakeup.h for device_set_wakeup_capableStephen Rothwell2008-07-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/pci/pci.c needs pm_wakeup.h since it uses device_set_wakup_capable(). The latter also needs to be stubbed out for !CONFIG_PM. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | Fix acpi_pm_device_sleep_wake() by providing a stub for CONFIG_PM_SLEEP=nDavid Howells2008-07-081-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So that one of the several config option permutations will build again. Tested-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | PCI: Simplify PCI device PM codeRafael J. Wysocki2008-07-072-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the offset of PCI device's PM capability in its configuration space, the mask of states that the device supports PME# from and the D1 and D2 support bits are cached in the corresponding struct pci_dev, the PCI device PM code can be simplified quite a bit. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | PCI PM: Introduce pci_prepare_to_sleep and pci_back_from_sleepRafael J. Wysocki2008-07-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce functions pci_prepare_to_sleep() and pci_back_from_sleep(), to be used by the PCI drivers that want to place their devices into the lowest power state appropiate for them (PCI_D3hot, if the device is not supposed to wake up the system, or the deepest state from which the wake-up is possible, otherwise) while the system is being prepared to go into a sleeping state and to put them back into D0 during the subsequent transition to the working state. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | PCI ACPI: Rework PCI handling of wake-upRafael J. Wysocki2008-07-072-20/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Introduce function acpi_pm_device_sleep_wake() for enabling and disabling the system wake-up capability of devices that are power manageable by ACPI. * Introduce function acpi_bus_can_wakeup() allowing other (dependent) subsystems to check if ACPI is able to enable the system wake-up capability of given device. * Introduce callback .sleep_wake() in struct pci_platform_pm_ops and for the ACPI PCI 'driver' make it use acpi_pm_device_sleep_wake(). * Introduce callback .can_wakeup() in struct pci_platform_pm_ops and for the ACPI 'driver' make it use acpi_bus_can_wakeup(). * Move the PME# handlig code out of pci_enable_wake() and split it into two functions, pci_pme_capable() and pci_pme_active(), allowing the caller to check if given device is capable of generating PME# from given power state and to enable/disable the device's PME# functionality, respectively. * Modify pci_enable_wake() to use the new ACPI callbacks and the new PME#-related functions. * Drop the generic .platform_enable_wakeup() callback that is not used any more. * Introduce device_set_wakeup_capable() that will set the power.can_wakeup flag of given device. * Rework PCI device PM initialization so that, if given device is capable of generating wake-up events, either natively through the PME# mechanism, or with the help of the platform, its power.can_wakeup flag is set and its power.should_wakeup flag is unset as appropriate. * Make ACPI set the power.can_wakeup flag for devices found to be wake-up capable by it. * Make the ACPI wake-up code enable/disable GPEs for devices that have the wakeup.flags.prepared flag set (which means that their wake-up power has been enabled). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | ACPI: Introduce new device wakeup flag 'prepared'Rafael J. Wysocki2008-07-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce additional flag 'prepared' in struct acpi_device_wakeup_flags and use it to prevent devices from being enable/disabled do wake up the system multiple times in a row (this does not happen currently, but will be possible after some of the following patches). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | ACPI: Introduce acpi_device_sleep_wake functionRafael J. Wysocki2008-07-071-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The currect ACPI code attempts to execute _PSW at three different places and in one of them only it tries to execute _DSW before _PSW, which is inconsistent with the other two cases. Move the execution of _DSW and _PSW into a separate function called acpi_device_sleep_wake() and call it wherever appropriate instead of executing _DSW and/or _PSW directly. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | ACPI: Introduce acpi_bus_power_manageable functionRafael J. Wysocki2008-07-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce function acpi_bus_power_manageable() allowing other (dependent) subsystems to check if ACPI is able to power manage given device. This may be useful, for example, for PCI device power management. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | PCI: make pci_name use dev_nameGreg KH2008-07-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also fixes up the sparc code that was assuming this is not a constant. Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | PCI: add stub for pci_set_consistent_dma_mask()Randy Dunlap2008-06-301-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When CONFIG_PCI=n, there is no stub for pci_set_consistent_dma_mask(), so add one like other similar stubs. Otherwise there can be build errors, as here: linux-next-20080630/drivers/ssb/main.c:1175: error: implicit declaration of function 'pci_set_consistent_dma_mask' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | PCI: Fix comment of pci_dynidsWang Chen2008-06-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | struct pci_driver has no field of driver_data. It's in pci_device_id. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | Suspend-related patches for 2.6.27Rafael J. Wysocki2008-06-122-1/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ACPI PM: Add possibility to change suspend sequence There are some systems out there that don't work correctly with our current suspend/hibernation code ordering. Provide a workaround for these systems allowing them to pass 'acpi_sleep=old_ordering' in the kernel command line so that it will use the pre-ACPI 2.0 ("old") suspend code ordering. Unfortunately, this requires us to add a platform hook to the resuming of devices for recovering the platform in case one of the device drivers' .suspend() routines returns error code. Namely, ACPI 1.0 specifies that _PTS should be called before suspending devices, but _WAK still should be called before resuming them in order to undo the changes made by _PTS. However, if there is an error during suspending devices, they are automatically resumed without returning control to the PM core, so the _WAK has to be called from within device_resume() in that cases. The patch also reorders and refactors the ACPI suspend/hibernation code to avoid duplication as far as reasonably possible. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | Merge branch 'suspend' of ↵Jesse Barnes2008-06-123-7/+7
| |\ \ \ | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 into linux-next
| | * | | ACPI PM: acpi_pm_device_sleep_state() cleanupDavid Brownell2008-06-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Get rid of a superfluous acpi_pm_device_sleep_state() parameter. The only legitimate value of that parameter must be derived from the first parameter, which is what all the callers already do. (However, this does not address the fact that ACPI still doesn't set up those flags.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
| * | | | PCI: introduce pci_slotAlex Chiang2008-06-102-11/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, /sys/bus/pci/slots/ only exposes hotplug attributes when a hotplug driver is loaded, but PCI slots have attributes such as address, speed, width, etc. that are not related to hotplug at all. Introduce pci_slot as the primary data structure and kobject model. Hotplug attributes described in hotplug_slot become a secondary structure associated with the pci_slot. This patch only creates the infrastructure that allows the separation of PCI slot attributes and hotplug attributes. In this patch, the PCI hotplug core remains the only user of this infrastructure, and thus, /sys/bus/pci/slots/ will still only become populated when a hotplug driver is loaded. A later patch in this series will add a second user of this new infrastructure and demonstrate splitting the task of exposing pci_slot attributes from hotplug_slot attributes. - Make pci_slot the primary sysfs entity. hotplug_slot becomes a subsidiary structure. o pci_create_slot() creates and registers a slot with the PCI core o pci_slot_add_hotplug() gives it hotplug capability - Change the prototype of pci_hp_register() to take the bus and slot number (on parent bus) as parameters. - Remove all the ->get_address methods since this functionality is now handled by pci_slot directly. [achiang@hp.com: rpaphp-correctly-pci_hp_register-for-empty-pci-slots] Tested-by: Badari Pulavarty <pbadari@us.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: make headers_check happy] [akpm@linux-foundation.org: nuther build fix] [akpm@linux-foundation.org: fix typo in #include] Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Matthew Wilcox <matthew@wil.cx> Cc: Greg KH <greg@kroah.com> Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Cc: Len Brown <lenb@kernel.org> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | | shpchp: check firmware before taking controlKenji Kaneshige2008-06-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following problems of shpchp driver about getting hotplug control from firmware. - The shpchp driver must not control the hotplug controller if it fails to get control from the firmware. But current shpchp controls the hotplug controller regardless the result, because it doesn't check the return value of get_hp_hw_control_from_firmware(). - Current shpchp driver doesn't support _OSC. The pciehp driver already have the code for evaluating _OSC and OSHP and shpchp and pciehp can share it. So this patch move that code from pciehp to acpi_pcihp.c. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | | PCI/x86: early dump pci conf space v2Yinghai Lu2008-06-101-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allows us to dump PCI space before any kernel changes have been made. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | | PCI/x86: write_pci_config_byte fix offsetYinghai Lu2008-06-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | also add write_pci_config_16 Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | | Implement new suspend and hibernation callbacks for platform bussesRafael J. Wysocki2008-06-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement new suspend and hibernation callbacks for the platform bus type. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg KH <greg@kroah.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | | PCI: implement new suspend/resume callbacksRafael J. Wysocki2008-06-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement new suspend and hibernation callbacks for the PCI bus type. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | | Introduce new top level suspend and hibernation callbacksRafael J. Wysocki2008-06-102-28/+295
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce 'struct pm_ops' and 'struct pm_ext_ops' ('ext' meaning 'extended') representing suspend and hibernation operations for bus types, device classes, device types and device drivers. Modify the PM core to use 'struct pm_ops' and 'struct pm_ext_ops' objects, if defined, instead of the ->suspend(), ->resume(), ->suspend_late(), and ->resume_early() callbacks (the old callbacks will be considered as legacy and gradually phased out). The main purpose of doing this is to separate suspend (aka S2RAM and standby) callbacks from hibernation callbacks in such a way that the new callbacks won't take arguments and the semantics of each of them will be clearly specified. This has been requested for multiple times by many people, including Linus himself, and the reason is that within the current scheme if ->resume() is called, for example, it's difficult to say why it's been called (ie. is it a resume from RAM or from hibernation or a suspend/hibernation failure etc.?). The second purpose is to make the suspend/hibernation callbacks more flexible so that device drivers can handle more than they can within the current scheme. For example, some drivers may need to prevent new children of the device from being registered before their ->suspend() callbacks are executed or they may want to carry out some operations requiring the availability of some other devices, not directly bound via the parent-child relationship, in order to prepare for the execution of ->suspend(), etc. Ultimately, we'd like to stop using the freezing of tasks for suspend and therefore the drivers' suspend/hibernation code will have to take care of the handling of the user space during suspend/hibernation. That, in turn, would be difficult within the current scheme, without the new ->prepare() and ->complete() callbacks. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | | Suspend/Resume bug in PCI layer wrt quirksRafael J. Wysocki2008-06-102-1/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some quirks should be called with interrupt disabled, we can't directly call them in .resume_early. Also the patch introduces pci_fixup_resume_early and pci_fixup_suspend, which matches current device core callbacks (.suspend/.resume_early). TBD: Somebody knows why we need quirk resume should double check if a quirk should be called in resume or resume_early. I changed some per my understanding, but can't make sure I fixed all. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | | PCI: drivers/pci/pci.c: add prototypesAdrian Bunk2008-06-101-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds prototypes for pcibios_disable_device() and pcibios_set_pcie_reset_state() in include/linux/pci.h While I was at it, I also removed the unneeded "extern" from the prototype of pcibios_add_platform_entries(). Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | | | | Merge branch 'for-linus' of ↵Linus Torvalds2008-07-1612-29/+108
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (68 commits) sdio_uart: Fix SDIO break control to now return success or an error mmc: host driver for Ricoh Bay1Controllers sdio: sdio_io.c Fix sparse warnings sdio: fix the use of hard coded timeout value. mmc: OLPC: update vdd/powerup quirk comment mmc: fix spares errors of sdhci.c mmc: remove multiwrite capability wbsd: fix bad dma_addr_t conversion atmel-mci: Driver for Atmel on-chip MMC controllers mmc: fix sdio_io sparse errors mmc: wbsd.c fix shadowing of 'dma' variable MMC: S3C24XX: Refuse incorrectly aligned transfers MMC: S3C24XX: Add maintainer entry MMC: S3C24XX: Update error debugging. MMC: S3C24XX: Add media presence test to request handling. MMC: S3C24XX: Fix use of msecs where jiffies are needed MMC: S3C24XX: Add MODULE_ALIAS() entries for the platform devices MMC: S3C24XX: Fix s3c2410_dma_request() return code check. MMC: S3C24XX: Allow card-detect on non-IRQ capable pin MMC: S3C24XX: Ensure host->mrq->data is valid ... Manually fixed up bogus executable bits on drivers/mmc/core/sdio_io.c and include/linux/mmc/sdio_func.h when merging.
generated by cgit v1.1 at 2025-02-07 04:18:28 +0000