aboutsummaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs/twl4030.c
Commit message (Collapse)AuthorAgeFilesLines
* ASoC: TWL4030: Add control for digimic Left Right swapPeter Ujfalusi2010-05-121-0/+12
| | | | | | | | | | The codec has support for swapping the left and right channels in the digimic interface. New kcontrol to handle this bit. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: Remove unneeded suspend bias managment from CODEC driversMark Brown2010-05-101-1/+0
| | | | | | | | | | | The core will ensure that the device is in either STANDBY or OFF bias before suspending, restoring the bias in the driver is unneeded. Some drivers doing slightly more roundabout things have been left alone for now. Tested-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Remove OUTL/R outputsPeter Ujfalusi2010-05-031-4/+0
| | | | | | | | | OUTL/R are leftovers from the original driver, and they are no longer needed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: TWL4030: AIF/APLL fix in DAPM domainPeter Ujfalusi2010-05-031-22/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch orders the APLL and AIF power sequence in case of HiFi (audio in TWL4030 terms) playback/capture. We also need to make sure that the AIF is running during playback/capture, when there is no valid DAPM route available. For this purpose I introduce these virtual widgets: /* To have complete playback route all the time */ DAPM_OUTPUT("Virtual HiFi OUT") /* Will keep AIF/APLL enabled */ /* To have complete capture route all the time */ DAPM_INPUT("Virtual HiFi IN") /* Will keep AIF/APLL enabled */ /* To have complete playback route for the voice module */ DAPM_OUTPUT("Virtual Voice OUT") /* Will keep APLL enabled */ The DAPM_SUPPLY widgets for APLL and AIF are placed in a way, that during any audio activity the needed configuration of AIF and APLL will be enabled (playback, capture, analog loopback, digital loopback, and voice activity). The apll reference counting code has been lifted, and modified from Liam Girdwood's earlier patch. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: missing conversions to snd_soc_codec_*_drvdata()Takashi Iwai2010-04-201-1/+1
| | | | | | | Conversions to snd_soc_codec_{get|set}_drvdata() were missing in some files in the previous commit. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ASoC: Add indirection for CODEC private dataMark Brown2010-04-171-16/+16
| | | | | | | | | | | | | | | | One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: TWL4030: PM fix for output amplifiersPeter Ujfalusi2010-03-221-16/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Gain controls on outputs affect the power consumption when the gain is set to non 0 value. Outputs with amps have one register to configure the routing and the gain: PREDL_CTL (0x25): bit 0: Voice enable bit 1: Audio L1 enable bit 2: Audio L2 enable bit 3: Audio R2 enable bit 4-5: Gain (0x0 - power down, 0x1 - 6dB, 0x2 - 0dB, 0x3 - -6dB) bit 0 - 3: is handled in DAPM domain (DAPM_MIXER) bit 4 - 5: has simple volume control If there is no audio activity (BIAS_STANDBY), and user changes the volume, than the output amplifier will be enabled. If the user changes the routing (but the codec remains in BIAS_STANDBY), than the cached gain value also be written to the register, which enables the amplifier. The existing workaround for this is to have virtual PGAs associated with the outputs, and whit DAPM PMD the gain on the output will be forced to 0 (off) by bypassing the regcache. This failed to disable the amplifiers in several scenario (as mentioned above). Also if the codec is in BIAS_ON state, and user modifies a volume control, which path is actually not enabled, than that amplifier will be enabled as well, but it will be not turned off, since there is no DAPM path, which would make mute it. To prevent amps being enabled, when they are not needed, introduce the following workaround: Track the state of each of this type of output. In twl4030_write only allow actual write, when the given output is enabled, otherwise only update the reg_cache. The PGA event handlers on power up will write the cached value to the chip (restoring gain, routing selection). On power down 0 is written to the register (disabling the amp, and also just in case clearing the routing). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Use codec defaults for Headset initial configurationPeter Ujfalusi2010-02-171-2/+2
| | | | | | | | | Disable the amplifiers for the headset outputs, and do not select routings by default to the headset outputs. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Add supply for audio serial interface controlPeter Ujfalusi2010-02-101-1/+13
| | | | | | | | | | | | | | | | | | The serial interface (TDM/I2S) for the audio block have been constantly enabled. Introduce a new DAPM_SUPPLY for handling the AIF_EN bit, so the interface is only enabled, when there is a need for it. For example when only the analog loopback is enabled, there is no need to keep the serial interface active. I have added the persons who contributed to the Voice path of twl4030 codec driver, so they might have the ability to test this patch, and send an update for the Voice path, if it is necessary Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Module unloading fixPeter Ujfalusi2010-02-041-2/+3
| | | | | | | | | | | | | The module unloading path had several problems: - it freed up the private structure twice - it freed up the codec structure, which was allocated as part of the private structure - it did not freed up the reg_cache - it did not unregistered the dais and the codec Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Modify codec default settingsPeter Ujfalusi2010-01-281-4/+4
| | | | | | | | | | | | | | | | Change the legacy default register configuration, which left some internal components on. Now we have either DAPM, or other ways to control these bits, so there is no need to enable them by default. The affected parts: Disable ADCL and ADCR Disable ARXL2 and ARXR2 analog PGA (playback) Disable APLL by default Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Replace comma with semicolon in probe functionPeter Ujfalusi2010-01-131-1/+1
| | | | | | | | The codec structure initialization statements should be separated by semicolons. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* mfd: Rename all twl4030_i2c*Balaji T K2009-12-131-4/+4
| | | | | | | | | | | | This patch renames function names like twl4030_i2c_write_u8, twl4030_i2c_read_u8 to twl_i2c_write_u8, twl_i2c_read_u8 and also common variable in twl-core.c Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* mfd: Rename twl4030* driver files to enable re-useSantosh Shilimkar2009-12-131-1/+1
| | | | | | | | | | | | | | | The upcoming TWL6030 is companion chip for OMAP4 like the current TWL4030 for OMAP3. The common modules like RTC, Regulator creates opportunity to re-use the most of the code from twl4030. This patch renames few common drivers twl4030* files to twl* to enable the code re-use. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* ASoC: Remove redundant snd_soc_dapm_new_widgets() callsMark Brown2009-11-121-1/+0
| | | | | | | The DAPM widgets are now insntantiated by the core when creating the card so there is no need for the individual CODEC drivers to do so. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Do not modify the APLL_CTL registerPeter Ujfalusi2009-11-101-45/+31
| | | | | | | | | | | APLL_CTL register is configured by the twl4030-codec MFD driver. Remove code, which makes changes in the APLL_CTL register, and replace those with checks against the configured audio_mclk configuration done in the MFD driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Factor out snd_soc_init_card()Mark Brown2009-11-031-12/+0
| | | | | | | | | snd_soc_init_card() is always called as the last part of the CODEC probe function so we can factor it out into the core card setup rather than have each CODEC replicate the code to do the initialiastation. This will be required to support multiple CODECs per card. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Make sure, that the codec is powered on startupPeter Ujfalusi2009-11-021-0/+1
| | | | | | | | Set the codec->bias_level to SND_SOC_BIAS_OFF before changing the initial bias level to STANDBY. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Add APLL supply for the capture pathPeter Ujfalusi2009-10-291-0/+5
| | | | | | | | Capture path also need the APLL enabled, adding DAPM_SUPPLY for the Virtual ADCs. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Change APLL powering sequencePeter Ujfalusi2009-10-291-2/+24
| | | | | | | | | | | | | | | | | | | It seams that certain part of the twl4030 codec needs the APLL enabled before they are enabled. Paths which has any digital processing needs need the APLL enabled before they can function. For example the vibra output will have some random data after it is enabled and before the APLL also enabled. If only analog components are in use (analog bypass), than it seams, that the APLL does not need to be enabled. This lowers the power consumption with around ~0.005A. Adding DAPM_SUPPLY to the Digital playback route and also to the capture route to enable and disable the APLL. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Vibra motor stop fix when it is driven with audioJari Vanhala2009-10-291-2/+10
| | | | | | | | | | | This patch fixes vibrator playing incoherently, when driven with audio. There is something wrong in switch 3 at H-bridge and VIBRA_SET still affects PWM generator. Slowest value fixes things. Signed-off-by: Jari Vanhala <ext-jari.vanhala@nokia.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Change codec_muted to apll_enabledPeter Ujfalusi2009-10-281-10/+10
| | | | | | | | codec_muted is missleading, change it to apll_enabled, which is what it is doing: enabing and disabling the APLL. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Remove bypass trackingPeter Ujfalusi2009-10-281-98/+30
| | | | | | | | | | | | | | | | | | Since ASoC core now handling the codec bias differently there is no need to do the tracking of bypass switch states anymore. Handling of the common bit for analog loopbacks is done with DAPM_SUPPLY for the bypass paths. Now this bit is only enabled when there is a complete analog bypass path, compared to the previous implementation, when the global switch was enabled if there were any of the analog bypass switch was on (regardless if there were complete path or not) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Driver registration via twl4030_codec MFDPeter Ujfalusi2009-10-251-77/+126
| | | | | | | | | Change the way how the twl4030 soc codec driver is loaded/probed. Use the device probing via tlw4030_codec MFD device. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Only update the needed bits in *set_dai_sysclkPeter Ujfalusi2009-10-191-10/+12
| | | | | | | | Do not rewrite the whole register, but only update the needed bits in set_dai_sysclk functions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Fix for capture mixer stringsPeter Ujfalusi2009-08-141-21/+25
| | | | | | | | | Change the strings related to capture in order to be interpreted correctly by alsamixer and possible other UI based mixer applications. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Introduce PGAs for outputsPeter Ujfalusi2009-08-131-49/+60
| | | | | | | | | | | | | | Dynamically control and control only the needed output amplifier muting/un-muting. The original code was muting and un-muting the following output amplifiers: Earpiece PreDrivL/R, CarkitL/R at the same time regardless which pin is actually in use at the given moment. Move these as separate PGA so only the needed amplifier will be touched. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Add tristate callbacks for HiFi and VoiceLopez Cruz, Misael2009-07-031-0/+28
| | | | | | | | | | Add "set_tristate" callbacks for HiFi and Voice DAIs. Machine drivers can enable and disable tristate for each DAI with "snd_soc_dai_set_tristate" function. Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Add EXTMUTE to reduce pop-noise effectCandelaria Villareal, Jorge2009-07-021-0/+27
| | | | | | | | | | | | | | | | | | | | | | According to TRM, an external FET controlled by a 1.8V output signal can be used to reduce the pop-noise heard when the audio amplifier is switched on. It is suggested that GPIO6 of TWL4030 be used, but any other gpio can be used instead. This is indicated in machine driver with the following twl4030_setup_data members: -hs_extmute. Set to 1 if board has support for EXTMUTE. -set_hs_extmute. Set to a callback funcion to control an external gpio line. Set to NULL if MUTE[GPIO6] pin is used. Codec driver takes care of enabling and disabling this output during the headset pop attenuation sequence. Also add a delay to let VMID settle in ramp up sequence. Signed-off-by: Jorge Eduardo Candelaria <x0107209@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Remove word "Switch" from Handsfree switch nameLopez Cruz, Misael2009-06-261-6/+6
| | | | | | | | | | SoC dapm adds the suffix "Switch" to SND_SOC_DAPM_SWITCH controls, removing word "Switch" from HandsfreeL/HandsfreeR widget name for avoiding to duplicate it. Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Correct bypass event for voice sidetoneLopez Cruz, Misael2009-06-231-7/+13
| | | | | | | | | | | | Event for voice sidetone was being interpreted as an analog HiFi bypass event because VSTPGA register offset is less than ARXR2_APGA_CTL offset. Reordering the register checks allows to handle voice digital bypass event properly. Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Add AVADC Clock PriorityLopez Cruz, Misael2009-06-231-0/+12
| | | | | | | | | | AVDAC clk priority allows to determine the path ADC must be connected when the codec is in option2 and both HiFi and Voice paths are enabled. Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Fix voice interface clock mastersLopez Cruz, Misael2009-06-221-1/+1
| | | | | | | | | Voice interface of twl4030 codec supports: CBM_CFM and CBS_CFS. It doesn't support CBS_CFM. Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Acked-By: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Staticise put_twl4030_opmode_enum_double()Mark Brown2009-06-201-1/+1
| | | | | | It's an operation for a control and doesn't need to be exported. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Fix shadowed variables in twl4030Mark Brown2009-06-201-2/+0
| | | | | | | | No need to define second copies of mode and format, they're declared with exactly the same type at the head of the function and there's no conflict in their use. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Fix build error in twl4030.cTakashi Iwai2009-06-041-0/+1
| | | | | | | | | Fix the (likely cut-n-paste) error by commit 16a30fbb0d3aa4ee829a2dd3d0e314e2b5ae96a9, which causes the error below: sound/soc/codecs/twl4030.c: In function 'twl4030_read_reg_cache': sound/soc/codecs/twl4030.c:152: error: 'cache' undeclared (first use in this function) Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ASoC: TWL4030: Check the interface format for 4 channel modePeter Ujfalusi2009-06-011-3/+9
| | | | | | | | | In addition to the operating mode check, also check the codec's interface format in case of four channel mode. If the codec is not in TDM (DSP_A) mode, return with error. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Use reg_cache in twl4030_init_chipPeter Ujfalusi2009-05-291-2/+2
| | | | | | | | Use the codec->reg_cache instead of the array directly in twl4030_init_chip for setting the default values. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: HandsfreeL/R mute DAPM switchPeter Ujfalusi2009-05-251-2/+16
| | | | | | | | | Add DAPM switch for HeadsetL/R mute. Since all bits are are needed for the HFL/R pop removal to work the switch is using the SW_SHADOW no HW register for the HandsfreeL/R mute. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Add shadow registerPeter Ujfalusi2009-05-251-1/+6
| | | | | | | | Shadow, non HW register for dealing with the HandsfreeL/R muting. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Handsfree pop removal redesignPeter Ujfalusi2009-05-251-19/+59
| | | | | | | | | | | Move the HandsfreeL/R (IHFL/R) pop removal code from the DAPM_MUX_E to a more appropriate DAPM_PGA_E widget. Also fix the power-up sequence to match with the TRM. The power-down sequence is not described in the TRM, so do it in a way, which seams like the correct sequence. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Differentiate the playback streamsPeter Ujfalusi2009-05-221-6/+6
| | | | | | | | Give unique stream names for the two playback streams so DAPM can figure out which codec_dai is in use. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Add support for platform dependent configurationPeter Ujfalusi2009-05-221-3/+19
| | | | | | | | | | | twl4030_setup_data structure can be passed from platform drivers to the codec via the snd_soc_device->codec_data pointer. Currently the setup data has support for the Headset pop-removal related configuration, which differs from board to board. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Move the Headset pop-attenuation code to PGA eventPeter Ujfalusi2009-05-201-25/+91
| | | | | | | | | | | | | | | This patch adds SND_SOC_DAPM_PGA_E to the headset path, which handles the headset ramp up and down sequences needed for the pop noise removal. With this patch the order of the internal components in the twl4030 codec is turned on and off in a correct order. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Tested-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Tested-by: Jarkko Nikula <jhnikula@gmail.com> Tested-by: Misael Lopez Cruz <x0052729@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Change DAPM routings and controls for DACs and PGAsPeter Ujfalusi2009-05-201-70/+71
| | | | | | | | | | | | | | | | | | | | | | | Restructuring the twl4030 codec's DAPM routing to be able to handle the power sequences correctly. The twl4030 codec internal implementation have this order: DAC -> Analog PGA -> Mixer/Mux While the ASoC framework expects the following order: DAC -> Mixer -> Analog PGA This patch moves the Analog PGA handling from SND_SOC_DAPM_PGA to _MIXER and adds two levels of mixer to handle the digital and analog loopback functionality. Now the analog loopback does not powers on any of the DACs. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Tested-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Tested-by: Jarkko Nikula <jhnikula@gmail.com> Tested-by: Misael Lopez Cruz <x0052729@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Add control for selecting codec operation modeLopez Cruz, Misael2009-05-191-0/+47
| | | | | | | | | | | | | | Add a control for selecting the codec operation mode. TWL4030 codec has two modes: - Option 1. Audio only (4 audio DACs) - Option 2. Voice/Audio (2 audio DACs and voice ADC/DAC) Control is restricted when a stream is ongoing, since codec's operation mode cannot be changed on-the-fly. Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Acked-by: Peter Ujflausi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Fix Analog capture path for AUXRPeter Ujfalusi2009-05-191-1/+1
| | | | | | | AUXR is selected by bit 2 and not by bit 1 in the ANAMICR register. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Enable/disable voice digital filtersMisael Lopez Cruz2009-05-181-0/+37
| | | | | | | | | | | | Enable TWL4030 VTXL/VTXR and VRX digital filters for uplink and downlink paths, respectively. This patch also corrects voice 8/16kHz mode selection bit (SEL_16K) of CODEC_MODE register. Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: change DAPM for analog microphone selectionJoonyoung Shim2009-05-121-33/+19
| | | | | | | | | | | The inputs of the twl4030 codec can be mixed, so we will use the mixer DAPM for the analog microphone registers(0x05, 0x06), but if we enable more than one input at the same time, the input impedance of the input amplifier will be reduced. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Fix typo in twl4030_codec_mute functionPeter Ujfalusi2009-05-081-1/+1
| | | | | | | | | Copy-paste error: TWL4030_PRECKL_GAIN >> TWL4030_PRECKR_GAIN It has not caused problems, since TWL4030_PRECKL_GAIN == TWL4030_PRECKR_GAIN == 0x30 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.1 at 2025-02-11 01:43:57 +0000