aboutsummaryrefslogtreecommitdiffstats
path: root/sound/soc/soc-core.c
Commit message (Collapse)AuthorAgeFilesLines
* ASoC: fill in snd_soc_pcm_runtime.card before calling snd_soc_dai_link.init()Janusz Krzysztofik2011-02-021-1/+1
| | | | | | | | | | | | | | The .card member of the snd_soc_pcm_runtime structure pointed to by the snd_soc_dai_link.init() argument used to be initialized before the function being called. This has changed, probably unintentionally, after recent refactorings. Since the function implementations are free to make use of this pointer, move its assignment back before the function is called to avoid NULL pointer dereferences. Created and tested on Amstrad Delta againts linux-2.6.38-rc2 Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Fix module refcount for auxiliary devicesJarkko Nikula2011-01-261-3/+0
| | | | | | | | | | | | | | Commit f6c2ed5 "ASoC: Fix the device references to codec and platform drivers" moved codec driver refcount increments from soc_bind_dai_link into soc_probe_codec. However, the commit didn't remove try_module_get from soc_probe_aux_dev so the auxiliary device reference counts are incremented twice as the soc_probe_codec is called from soc_probe_aux_dev too. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Fix the device references to codec and platform driversHarsha Priya2011-01-051-7/+7
| | | | | | | | | | | | | | | The soc-core takes the platform and codec driver reference during probe. Few of these references are not released during remove. This cause the platform and codec driver module unload to fail. This patch fixes by the taking only one reference to platform and codec module during probe and releases them correctly during remove. This allows load/unload properly Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Harsha Priya <priya.harsha@intel.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Extend DAPM to handle power changes on cross-device pathsJarkko Nikula2010-12-151-0/+2
| | | | | | | | | | | | | | | | | | | Power change event like stream start/stop or kcontrol change in a cross-device path originates from one device but codec bias and widget power changes must be populated to another devices on that path as well. This patch modifies the dapm_power_widgets so that all the widgets on a sound card are checked for a power change, not just those that are specific to originating device. Also bias management is extended to check all the devices. Only exception in bias management are widgetless codecs whose bias state is changed only if power change is originating from that context. DAPM context test is added to dapm_seq_run to take care of if power sequence extends to an another device which requires separate register writes. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Move widgets from DAPM context to snd_soc_cardJarkko Nikula2010-12-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Decoupling widgets from DAPM context is required when extending the ASoC core to cross-device paths. Even the list of widgets are now kept in struct snd_soc_card, the widget listing in sysfs and debugs remain sorted per device. This patch makes possible to build cross-device paths but does not extend yet the DAPM to handle codec bias and widget power changes of an another device. Cross-device paths are registered by listing the widgets from device A in a map for device B. In case of conflicting widget names between the devices, a uniform name prefix is needed to separate them. See commit ead9b91 "ASoC: Add optional name_prefix for kcontrol, widget and route names" for help. An example below shows a path that connects MONO out of A into Line In of B: static const struct snd_soc_dapm_route mapA[] = { {"MONO", NULL, "DAC"}, }; static const struct snd_soc_dapm_route mapB[] = { {"Line In", NULL, "MONO"}, }; Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Move DAPM paths from DAPM context to snd_soc_cardJarkko Nikula2010-12-151-1/+1
| | | | | | | | | | | | Decoupling DAPM paths from DAPM context is a first prerequisite when extending ASoC core to cross-device paths. This patch is almost a nullop and does not allow to construct cross-device setup but the path clean-up part in dapm_free_widgets is prepared to remove cross-device paths between a device being removed and others. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Fix AC'97 registration unwindMark Brown2010-12-131-1/+1
| | | | | | | | soc_unregister_ac97_dai_link() takes a CODEC as an argument, not a rtd like the registration function, so give it what it's looking for. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* Merge branch 'topic/workq-update' into topic/asocTakashi Iwai2010-12-131-22/+3
|\ | | | | | | | | | | | | | | Conflicts: sound/soc/codecs/wm8350.c sound/soc/codecs/wm8753.c sound/soc/sh/fsi.c sound/soc/soc-core.c
| * sound: don't use flush_scheduled_work()Tejun Heo2010-12-131-22/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | flush_scheduled_work() is deprecated and scheduled to be removed. * cancel[_delayed]_work() + flush_scheduled_work() -> cancel[_delayed]_work_sync(). * wm8350, wm8753 and soc-core use custom code to cancel a delayed work, execute it immediately if it was pending and wait for its completion. This is equivalent to flush_delayed_work_sync(). Use it instead. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ASoC: soc-core: Fix null pointer dereferenceDimitris Papastamos2010-12-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | In case the codec driver did not provide a read/write function, codec->driver->read|write will be NULL. Ensure that we use the one specified in codec->read|write to avoid oopsing when we access the debugfs entries. This is achieved by using snd_soc_read() and snd_soc_write(). Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: Fix snd_soc_instantiate_card error pathAxel Lin2010-12-071-6/+8
| | | | | | | | | | | | | | | | Properly free the resources in the case of snd_card_register failure and soc_register_ac97_dai_link failure. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: soc-core: Remove useless inline function constructDimitris Papastamos2010-12-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | There is no need to mark this function as inline. Inline functions usually are small and concise functions that benefit from not needing to set up a stack frame and undergo a call/ret sequence upon each invocation. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: soc-core: Replace use of strncpy() with strlcpy()Dimitris Papastamos2010-12-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | By using strncpy() if the source string does not have a null byte in the first n bytes, then the destination string is not null-terminated. This can be fixed in a two-step process by manually null-terminating the array after the use of strncpy() or by using strlcpy(). Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: Merge common code in DAI link and auxiliary codec probing/removalJarkko Nikula2010-12-061-152/+132
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 2eea392 "ASoC: Add support for optional auxiliary dailess codecs" added much of code that can be shared with DAI link codec probing/removal. Merge now this common code into new soc_probe_codec, soc_remove_codec and soc_post_component_init functions. Error prints in these functions are converted to use dev_err and to print the error code. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | Merge branch 'for-2.6.37' into for-2.6.38Mark Brown2010-12-061-0/+2
|\ \ | | | | | | | | | | | | Conflicts: include/linux/mfd/wm8994/pdata.h
| * | ASoC: Hold client_mutex while calling snd_soc_instantiate_cards()Axel Lin2010-12-061-0/+2
| |/ | | | | | | | | | | | | | | As the comments of snd_soc_instantiate_cards() said, snd_soc_instantiate_cards() must be called with client_mutex. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: soc-cache: Add optional cache name member to snd_soc_cache_opsDimitris Papastamos2010-12-061-3/+0
| | | | | | | | | | | | | | | | | | | | | | Added an optional name member to snd_soc_cache_ops to enable more sensible diagnostic messages during cache init, exit and sync. Remove redundant newline in source code. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: Add trace events for jack detectionMark Brown2010-12-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | As jack detection can trigger DAPM and the latency in debouncing can create confusing windows in operation provide some trace events which will hopefully help in diagnostics. The soc-jack core traces all reports that it gets and the resulting notifications to upper layers. An event for jack IRQs is also provided for instrumentation of debounce, and used in the GPIO jack code. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | ASoC: Constify struct snd_soc_codec_driverMark Brown2010-12-031-2/+3
| | | | | | | | | | | | | | | | Allow the CODEC driver structure to be marked const by making all the APIs that use it do so. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | ASoC: soc-core: Allow machine drivers to override compress_typeDimitris Papastamos2010-12-031-11/+63
| | | | | | | | | | | | | | | | | | This patch allows machine drivers to override the compression type provided by the codec driver. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: soc-cache: Use reg_def_copy instead of reg_cache_defaultDimitris Papastamos2010-12-031-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | Make sure to use codec->reg_def_copy instead of codec_drv->reg_cache_default wherever necessary. This change is necessary because in the next patch we move the cache initialization code outside snd_soc_register_codec() and by that time any data marked as __devinitconst such as the original reg_cache_default array might have already been freed by the kernel. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: soc-core: Generalize snd_soc_prefix_map and rename to snd_soc_codec_confDimitris Papastamos2010-12-031-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The snd_soc_codec_conf struct now holds codec specific configuration information. A new configuration option has been added to allow machine drivers to override the compression type set by the codec driver. In the absence of providing an snd_soc_codec_conf struct or when providing one but not setting the compress_type member to anything, the one supplied by the codec driver will be used instead. In all other cases the one set in the snd_soc_codec_conf struct takes effect. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: Add compress_type as a member to snd_soc_codecDimitris Papastamos2010-12-031-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to keep a copy of the compress_type supplied by the codec driver so that we can override it if necessary with whatever the machine driver has provided us with. The reason for not modifying the codec->driver struct directly is that ideally we'd like to keep it const. Adjust the code in soc-cache and soc-core to make use of the compress_type member in the snd_soc_codec struct. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: Don't oops in soc_probe_aux_dev in case of missing codecJarkko Nikula2010-12-031-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | Blind copy of codec finding algorithm from soc_bind_dai_link does not work in soc_probe_aux_dev if matching codec name is not found. In that case the code falls through and tries to start the probing procedure with invalid codec pointer. Fix this and add an error print showing the codec name that cannot be found. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: Move active copy of CODEC read and write into runtime structureMark Brown2010-12-031-2/+4
| | | | | | | | | | | | | | | | | | | | We shouldn't be assigning to the driver structure (which really ought to be const, further patch to follow) though there's unlikely to be any actual problem except in the unlikely case that two devices with the same driver but different bus types appear in the same system. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | ASoC: Apostrophe patrol in soc-core.cMark Brown2010-12-031-4/+4
| | | | | | | | | | | | | | Silly little grammar nit but it bugs the hell out of me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | ASoC: Fix build failure in soc-core.cJarkko Nikula2010-12-011-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 2eea392 "ASoC: Add support for optional auxiliary dailess codecs" causes a build failure in soc-core.c: soc_probe_aux_dev since code tries to access non-existing struct snd_soc_dapm_context and struct snd_soc_card members. Root cause for this was a double accident. Author sent the RFC patch from top of another patch set and the RFC got committed. Fix the build failure by removing the code line that depends on that another patch set. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: Add support for optional auxiliary dailess codecsJarkko Nikula2010-11-301-6/+149
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This makes possible to register auxiliary dailess codecs in a machine driver. Term dailess is used here for amplifiers and codecs without DAI or DAI being unused. Dailess auxiliary codecs are kept in struct snd_soc_aux_dev and those codecs are probed after initializing the DAI links. There are no major differences between DAI link codecs and dailess codecs in ASoC core point of view. DAPM handles them equally and sysfs and debugfs directories for dailess codecs are similar except the pmdown_time node is not created. Only suspend and resume functions are modified to traverse all probed codecs instead of DAI link codecs. Example below shows a dailess codec registration. struct snd_soc_aux_dev foo_aux_dev[] = { { .name = "Amp", .codec_name = "codec.2", .init = foo_init2, }, }; static struct snd_soc_card card = { ... .aux_dev = foo_aux_dev, .num_aux_devs = ARRAY_SIZE(foo_aux_dev), }; Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: Do not include soc-dapm.hJarkko Nikula2010-11-221-1/+0
| | | | | | | | | | | | | | | | There is no need to include soc-dapm.h since soc.h includes it. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: Add optional name_prefix for codec kcontrol, widget and route namesJarkko Nikula2010-11-151-2/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a need to prefix codec kcontrol, widget and internal route names in an ASoC machine that has multiple codecs with conflicting names. The name collision would occur when codec drivers try to registering kcontrols with the same name or when building audio paths. This patch introduces optional prefix_map into struct snd_soc_card. With it machine drivers can specify a unique name prefix to each codec that have conflicting names with anothers. Prefix to codec is matched with codec name. Following example illustrates a machine that has two same codec instances. Name collision from kcontrol registration is avoided by specifying a name prefix "foo" for the second codec. As the codec widget names are prefixed then second audio map for that codec shows a prefixed widget name. static const struct snd_soc_dapm_route map0[] = { {"Spk", NULL, "MONO"}, }; static const struct snd_soc_dapm_route map1[] = { {"Vibra", NULL, "foo MONO"}, }; static struct snd_soc_prefix_map codec_prefix[] = { { .dev_name = "codec.2", .name_prefix = "foo", }, }; static struct snd_soc_card card = { ... .prefix_map = codec_prefix, .num_prefixes = ARRAY_SIZE(codec_prefix), }; Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: soc-cache: Add support for flat register cachingDimitris Papastamos2010-11-111-23/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces the new caching API and migrates the old caching interface into the new one. The flat register caching technique does not use compression at all and it is equivalent to the old caching technique. One can still access codec->reg_cache directly but this is not advised as that will not be portable across different caching strategies. None of the existing drivers need to be changed to adapt to this caching technique. There should be no noticeable overhead associated with using the new caching API. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: Add trace events for ASoC register read/writeMark Brown2010-11-111-0/+5
| | | | | | | | | | | | | | | | | | | | | | The trace subsystem provides a convenient way of instrumenting the kernel which can be left on all the time with extremely low impact on the system unlike prints to the kernel log which can be very spammy. Begin adding support for instrumenting ASoC via this interface by adding trace for the register access primitives. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | ASoC: Fix compile error if CONFIG_DEBUG_FS is not configuredAxel Lin2010-11-091-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add soc_init_card_debugfs and soc_cleanup_card_debugfs functions to fix below error. CC sound/soc/soc-core.o sound/soc/soc-core.c: In function 'soc_probe': sound/soc/soc-core.c:1689: error: implicit declaration of function 'soc_init_card_debugfs' sound/soc/soc-core.c: In function 'soc_remove': sound/soc/soc-core.c:1718: error: implicit declaration of function 'soc_cleanup_card_debugfs' make[2]: *** [sound/soc/soc-core.o] Error 1 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: Move pop time from DAPM context to sound cardJarkko Nikula2010-11-061-8/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | Based on discussion the dapm_pop_time in debugsfs should be per card rather than per device. Single pop time value for entire card is cleaner when the DAPM sequencing is extended to cross-device paths. debugfs/asoc/{card->name}/{codec dir}/dapm_pop_time -> debugfs/asoc/{card->name}/dapm_pop_time Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: Move codec debugfs directories under parent card directoryJarkko Nikula2010-11-061-2/+4
| | | | | | | | | | | | | | | | | | | | Make use of sound card debugfs directory and move codec directories under the parent card debugfs directory. debugfs/asoc/{codec dir} -> debugfs/asoc/{card->name}/{codec dir}. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: Add sound card directory under debugfs/asoc/Jarkko Nikula2010-11-061-0/+18
| | | | | | | | | | | | | | | | | | There will be need to have sound card specific debugfs entries. This patch introduces a new debugfs/asoc/{card->name}/ directory but does not add yet any entries there. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: Decouple DAPM from CODECsLiam Girdwood2010-11-061-13/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | Merge branch 'for-2.6.37' into HEADMark Brown2010-11-051-5/+4
|\ \ | |/
| * ASoC: Fix snd_soc_register_dais error handlingAxel Lin2010-11-031-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | kzalloc for dai may fail at any iteration of the for loop, thus properly unregister already registered DAIs before return error. The error handling code in snd_soc_register_dais() already ensure all the DAIs are unregistered before return error, we can remove the error handling code to unregister DAIs in snd_soc_register_codec(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: Push snd_soc_write() and snd_soc_read() into the source fileMark Brown2010-11-031-0/+19
|/ | | | | | | | Facilitating adding trace type stuff. For a first pass add some dev_dbg() statements into them. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* Merge commit 'v2.6.37-rc1' into for-2.6.37Mark Brown2010-11-021-0/+1
|\
| * Merge branch 'for-linus' of ↵Linus Torvalds2010-10-251-685/+1136
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (365 commits) ALSA: hda - Disable sticky PCM stream assignment for AD codecs ALSA: usb - Creative USB X-Fi volume knob support ALSA: ca0106: Use card specific dac id for mute controls. ALSA: ca0106: Allow different sound cards to use different SPI channel mappings. ALSA: ca0106: Create a nice spot for mapping channels to dacs. ALSA: ca0106: Move enabling of front dac out of hardcoded setup sequence. ALSA: ca0106: Pull out dac powering routine into separate function. ALSA: ca0106 - add Sound Blaster 5.1vx info. ASoC: tlv320dac33: Use usleep_range for delays ALSA: usb-audio: add Novation Launchpad support ALSA: hda - Add workarounds for CT-IBG controllers ALSA: hda - Fix wrong TLV mute bit for STAC/IDT codecs ASoC: tpa6130a2: Error handling for broken chip ASoC: max98088: Staticise m98088_eq_band ASoC: soc-core: Fix codec->name memory leak ALSA: hda - Apply ideapad quirk to Acer laptops with Cxt5066 ALSA: hda - Add some workarounds for Creative IBG ALSA: hda - Fix wrong SPDIF NID assignment for CA0110 ALSA: hda - Fix codec rename rules for ALC662-compatible codecs ALSA: hda - Add alc_init_jacks() call to other codecs ...
| * | llseek: automatically add .llseek fopArnd Bergmann2010-10-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
* | | ASoC: Check return value of struct_strtoul() in pmdown_time_set()Mark Brown2010-10-281-1/+4
| |/ |/| | | | | | | | | | | strict_strtoul() has just been made must check so do so. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | ASoC: soc-core: Fix codec->name memory leakDimitris Papastamos2010-10-211-0/+1
| | | | | | | | | | | | | | | | Ensure that the codec->name is freed when unregistering the codec. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: Fix I2C component device id number creationJarkko Nikula2010-10-191-1/+1
| | | | | | | | | | | | | | | | Use bitwise AND instead of logical AND when masking. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: Pay attention to driver supplied DAI IDsMark Brown2010-10-131-1/+4
| | | | | | | | | | | | | | The driver can specify a DAI ID number so use that. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | ASoC: Check list debugfs files for PAGE_SIZE overflowMark Brown2010-10-131-15/+34
| | | | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | ASoC: Move soc-core module init next to functon definitionMark Brown2010-10-131-2/+1
| | | | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | ASoC: don't register AC97 devices twiceMika Westerberg2010-10-131-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With generic AC97 ASoC glue driver (codec/ac97.c), we get following warning when the device is registered (slightly stripped the backtrace): kobject (c5a863e8): tried to init an initialized object, something is seriously wrong. [<c00254fc>] (unwind_backtrace+0x0/0xec) [<c014fad0>] (kobject_init+0x38/0x70) [<c0171e94>] (device_initialize+0x20/0x70) [<c017267c>] (device_register+0xc/0x18) [<bf20db70>] (snd_soc_instantiate_cards+0x924/0xacc [snd_soc_core]) [<bf20e0d0>] (snd_soc_register_platform+0x16c/0x198 [snd_soc_core]) [<c0175304>] (platform_drv_probe+0x18/0x1c) [<c0174454>] (driver_probe_device+0xb0/0x16c) [<c017456c>] (__driver_attach+0x5c/0x7c) [<c0173cec>] (bus_for_each_dev+0x48/0x78) [<c0173600>] (bus_add_driver+0x98/0x214) [<c0174834>] (driver_register+0xa4/0x130) [<c001f410>] (do_one_initcall+0xd0/0x1a4) [<c0062ddc>] (sys_init_module+0x12b0/0x1454) This happens because the generic AC97 glue driver creates its codec->ac97 via calling snd_ac97_mixer(). snd_ac97_mixer() provides own version of snd_device.register which handles the device registration when snd_card_register() is called. To avoid registering the AC97 device twice, we add a new flag to the snd_soc_codec: ac97_created which tells whether the AC97 device was created by SoC subsystem. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.1 at 2024-12-28 04:52:51 +0000