From 00aaaef9a51a1a25c5d6d52ce510772f149a0eb0 Mon Sep 17 00:00:00 2001 From: Sheng Yang Date: Thu, 11 Nov 2010 15:46:54 +0800 Subject: PCI: MSI: Move MSI-X entry definition to pci_regs.h Then it can be used by others. Reviewed-by: Hidetoshi Seto Reviewed-by: Matthew Wilcox Signed-off-by: Sheng Yang Signed-off-by: Jesse Barnes --- drivers/pci/msi.h | 6 ------ include/linux/pci_regs.h | 7 +++++++ 2 files changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/pci/msi.h b/drivers/pci/msi.h index feff3be..65c42f8 100644 --- a/drivers/pci/msi.h +++ b/drivers/pci/msi.h @@ -6,12 +6,6 @@ #ifndef MSI_H #define MSI_H -#define PCI_MSIX_ENTRY_SIZE 16 -#define PCI_MSIX_ENTRY_LOWER_ADDR 0 -#define PCI_MSIX_ENTRY_UPPER_ADDR 4 -#define PCI_MSIX_ENTRY_DATA 8 -#define PCI_MSIX_ENTRY_VECTOR_CTRL 12 - #define msi_control_reg(base) (base + PCI_MSI_FLAGS) #define msi_lower_address_reg(base) (base + PCI_MSI_ADDRESS_LO) #define msi_upper_address_reg(base) (base + PCI_MSI_ADDRESS_HI) diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index af83076..b21d33e 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -309,6 +309,13 @@ #define PCI_MSIX_PBA 8 #define PCI_MSIX_FLAGS_BIRMASK (7 << 0) +/* MSI-X entry's format */ +#define PCI_MSIX_ENTRY_SIZE 16 +#define PCI_MSIX_ENTRY_LOWER_ADDR 0 +#define PCI_MSIX_ENTRY_UPPER_ADDR 4 +#define PCI_MSIX_ENTRY_DATA 8 +#define PCI_MSIX_ENTRY_VECTOR_CTRL 12 + /* CompactPCI Hotswap Register */ #define PCI_CHSWP_CSR 2 /* Control and Status Register */ -- cgit v1.1 From 8d805286968811223cca002134ba3d81244d5313 Mon Sep 17 00:00:00 2001 From: Sheng Yang Date: Thu, 11 Nov 2010 15:46:55 +0800 Subject: PCI: Add mask bit definition for MSI-X table Then we can use it instead of magic number 1. Reviewed-by: Hidetoshi Seto Cc: Matthew Wilcox Signed-off-by: Sheng Yang Signed-off-by: Jesse Barnes --- drivers/pci/msi.c | 5 +++-- include/linux/pci_regs.h | 1 + 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 7c24dce..44b0aee 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -168,8 +168,9 @@ static u32 __msix_mask_irq(struct msi_desc *desc, u32 flag) u32 mask_bits = desc->masked; unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE + PCI_MSIX_ENTRY_VECTOR_CTRL; - mask_bits &= ~1; - mask_bits |= flag; + mask_bits &= ~PCI_MSIX_ENTRY_CTRL_MASKBIT; + if (flag) + mask_bits |= PCI_MSIX_ENTRY_CTRL_MASKBIT; writel(mask_bits, desc->mask_base + offset); return mask_bits; diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index b21d33e..d4f2c80 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -315,6 +315,7 @@ #define PCI_MSIX_ENTRY_UPPER_ADDR 4 #define PCI_MSIX_ENTRY_DATA 8 #define PCI_MSIX_ENTRY_VECTOR_CTRL 12 +#define PCI_MSIX_ENTRY_CTRL_MASKBIT 1 /* CompactPCI Hotswap Register */ -- cgit v1.1 From 2f671e2dbff6eb5ef4e2600adbec550c13b8fe72 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Mon, 6 Dec 2010 14:00:56 -0500 Subject: PCI: Disable ASPM if BIOS asks us to We currently refuse to touch the ASPM registers if the BIOS tells us that ASPM isn't supported. This can cause problems if the BIOS has (for any reason) enabled ASPM on some devices anyway. Change the code such that we explicitly clear ASPM if the FADT indicates that ASPM isn't supported, and make sure we tidy up appropriately on device removal in order to deal with the hotplug case. If ASPM is disabled because the BIOS doesn't hand over control then we won't touch the registers. Signed-off-by: Matthew Garrett Signed-off-by: Jesse Barnes --- drivers/pci/pci-acpi.c | 1 + drivers/pci/pcie/aspm.c | 21 +++++++++++++++++---- include/linux/pci-aspm.h | 5 ++++- 3 files changed, 22 insertions(+), 5 deletions(-) diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 24e19c5..d7ea699 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -399,6 +399,7 @@ static int __init acpi_pci_init(void) if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM) { printk(KERN_INFO"ACPI FADT declares the system doesn't support PCIe ASPM, so disable it\n"); + pcie_clear_aspm(); pcie_no_aspm(); } diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 7122281..3188cd9 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -68,7 +68,7 @@ struct pcie_link_state { struct aspm_latency acceptable[8]; }; -static int aspm_disabled, aspm_force; +static int aspm_disabled, aspm_force, aspm_clear_state; static DEFINE_MUTEX(aspm_lock); static LIST_HEAD(link_list); @@ -139,7 +139,7 @@ static void pcie_set_clkpm(struct pcie_link_state *link, int enable) { /* Don't enable Clock PM if the link is not Clock PM capable */ if (!link->clkpm_capable && enable) - return; + enable = 0; /* Need nothing if the specified equals to current state */ if (link->clkpm_enabled == enable) return; @@ -498,6 +498,10 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev) struct pci_dev *child; int pos; u32 reg32; + + if (aspm_clear_state) + return -EINVAL; + /* * Some functions in a slot might not all be PCIe functions, * very strange. Disable ASPM for the whole slot @@ -563,12 +567,15 @@ void pcie_aspm_init_link_state(struct pci_dev *pdev) struct pcie_link_state *link; int blacklist = !!pcie_aspm_sanity_check(pdev); - if (aspm_disabled || !pci_is_pcie(pdev) || pdev->link_state) + if (!pci_is_pcie(pdev) || pdev->link_state) return; if (pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT && pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM) return; + if (aspm_disabled && !aspm_clear_state) + return; + /* VIA has a strange chipset, root port is under a bridge */ if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT && pdev->bus->self) @@ -641,7 +648,7 @@ void pcie_aspm_exit_link_state(struct pci_dev *pdev) struct pci_dev *parent = pdev->bus->self; struct pcie_link_state *link, *root, *parent_link; - if (aspm_disabled || !pci_is_pcie(pdev) || + if ((aspm_disabled && !aspm_clear_state) || !pci_is_pcie(pdev) || !parent || !parent->link_state) return; if ((parent->pcie_type != PCI_EXP_TYPE_ROOT_PORT) && @@ -899,6 +906,12 @@ static int __init pcie_aspm_disable(char *str) __setup("pcie_aspm=", pcie_aspm_disable); +void pcie_clear_aspm(void) +{ + if (!aspm_force) + aspm_clear_state = 1; +} + void pcie_no_aspm(void) { if (!aspm_force) diff --git a/include/linux/pci-aspm.h b/include/linux/pci-aspm.h index 91ba0b3..ce68105 100644 --- a/include/linux/pci-aspm.h +++ b/include/linux/pci-aspm.h @@ -27,6 +27,7 @@ extern void pcie_aspm_init_link_state(struct pci_dev *pdev); extern void pcie_aspm_exit_link_state(struct pci_dev *pdev); extern void pcie_aspm_pm_state_change(struct pci_dev *pdev); extern void pci_disable_link_state(struct pci_dev *pdev, int state); +extern void pcie_clear_aspm(void); extern void pcie_no_aspm(void); #else static inline void pcie_aspm_init_link_state(struct pci_dev *pdev) @@ -41,7 +42,9 @@ static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev) static inline void pci_disable_link_state(struct pci_dev *pdev, int state) { } - +static inline void pcie_clear_aspm(void) +{ +} static inline void pcie_no_aspm(void) { } -- cgit v1.1 From 1d3c16a818e992c199844954d95c17fd7ce6cbba Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Tue, 30 Nov 2010 17:43:26 -0600 Subject: PCI: make pci_restore_state return void pci_restore_state only ever returns 0, thus there is no benefit in having it return any value. Also, a large majority of the callers do not check the return code of pci_restore_state. Make the pci_restore_state a void return and avoid the overhead. Acked-by: Mauro Carvalho Chehab Signed-off-by: Jon Mason Signed-off-by: Jesse Barnes --- drivers/media/video/cafe_ccic.c | 4 +--- drivers/net/myri10ge/myri10ge.c | 4 +--- drivers/net/sfc/falcon.c | 25 +++++-------------------- drivers/net/skge.c | 4 +--- drivers/net/sky2.c | 5 +---- drivers/net/wireless/rt2x00/rt2x00pci.c | 4 ++-- drivers/pci/pci-driver.c | 3 ++- drivers/pci/pci.c | 7 ++----- drivers/scsi/ipr.c | 8 +------- drivers/scsi/pmcraid.c | 7 +------ drivers/staging/sm7xx/smtcfb.c | 2 +- include/linux/pci.h | 8 +++----- sound/pci/cs5535audio/cs5535audio_pm.c | 7 +------ 13 files changed, 22 insertions(+), 66 deletions(-) diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c index 0dfff50..737bb87 100644 --- a/drivers/media/video/cafe_ccic.c +++ b/drivers/media/video/cafe_ccic.c @@ -2186,9 +2186,7 @@ static int cafe_pci_resume(struct pci_dev *pdev) struct cafe_camera *cam = to_cam(v4l2_dev); int ret = 0; - ret = pci_restore_state(pdev); - if (ret) - return ret; + pci_restore_state(pdev); ret = pci_enable_device(pdev); if (ret) { diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 8524cc4..d3c4a37 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -3403,9 +3403,7 @@ static int myri10ge_resume(struct pci_dev *pdev) return -EIO; } - status = pci_restore_state(pdev); - if (status) - return status; + pci_restore_state(pdev); status = pci_enable_device(pdev); if (status) { diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index 267019b..1763b9a 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -1066,22 +1066,9 @@ static int falcon_reset_hw(struct efx_nic *efx, enum reset_type method) /* Restore PCI configuration if needed */ if (method == RESET_TYPE_WORLD) { - if (efx_nic_is_dual_func(efx)) { - rc = pci_restore_state(nic_data->pci_dev2); - if (rc) { - netif_err(efx, drv, efx->net_dev, - "failed to restore PCI config for " - "the secondary function\n"); - goto fail3; - } - } - rc = pci_restore_state(efx->pci_dev); - if (rc) { - netif_err(efx, drv, efx->net_dev, - "failed to restore PCI config for the " - "primary function\n"); - goto fail4; - } + if (efx_nic_is_dual_func(efx)) + pci_restore_state(nic_data->pci_dev2); + pci_restore_state(efx->pci_dev); netif_dbg(efx, drv, efx->net_dev, "successfully restored PCI config\n"); } @@ -1092,7 +1079,7 @@ static int falcon_reset_hw(struct efx_nic *efx, enum reset_type method) rc = -ETIMEDOUT; netif_err(efx, hw, efx->net_dev, "timed out waiting for hardware reset\n"); - goto fail5; + goto fail3; } netif_dbg(efx, hw, efx->net_dev, "hardware reset complete\n"); @@ -1100,11 +1087,9 @@ static int falcon_reset_hw(struct efx_nic *efx, enum reset_type method) /* pci_save_state() and pci_restore_state() MUST be called in pairs */ fail2: -fail3: pci_restore_state(efx->pci_dev); fail1: -fail4: -fail5: +fail3: return rc; } diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 220e039..61553af 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -4087,9 +4087,7 @@ static int skge_resume(struct pci_dev *pdev) if (err) goto out; - err = pci_restore_state(pdev); - if (err) - goto out; + pci_restore_state(pdev); err = skge_reset(hw); if (err) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index d657708..be3aee7 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -4969,10 +4969,7 @@ static int sky2_resume(struct pci_dev *pdev) if (err) goto out; - err = pci_restore_state(pdev); - if (err) - goto out; - + pci_restore_state(pdev); pci_enable_wake(pdev, PCI_D0, 0); /* Re-enable all clocks */ diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index 2449d78..4fd4c33 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -356,12 +356,12 @@ int rt2x00pci_resume(struct pci_dev *pci_dev) struct rt2x00_dev *rt2x00dev = hw->priv; if (pci_set_power_state(pci_dev, PCI_D0) || - pci_enable_device(pci_dev) || - pci_restore_state(pci_dev)) { + pci_enable_device(pci_dev)) { ERROR(rt2x00dev, "Failed to resume device.\n"); return -EIO; } + pci_restore_state(pci_dev); return rt2x00lib_resume(rt2x00dev); } EXPORT_SYMBOL_GPL(rt2x00pci_resume); diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 8a6f797..80e551e 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -449,7 +449,8 @@ static int pci_restore_standard_config(struct pci_dev *pci_dev) return error; } - return pci_restore_state(pci_dev); + pci_restore_state(pci_dev); + return 0; } static void pci_pm_default_resume_early(struct pci_dev *pci_dev) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 710c8a2..6762dca 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -937,14 +937,13 @@ pci_save_state(struct pci_dev *dev) * pci_restore_state - Restore the saved state of a PCI device * @dev: - PCI device that we're dealing with */ -int -pci_restore_state(struct pci_dev *dev) +void pci_restore_state(struct pci_dev *dev) { int i; u32 val; if (!dev->state_saved) - return 0; + return; /* PCI Express register must be restored first */ pci_restore_pcie_state(dev); @@ -968,8 +967,6 @@ pci_restore_state(struct pci_dev *dev) pci_restore_iov_state(dev); dev->state_saved = false; - - return 0; } static int do_pci_enable_device(struct pci_dev *dev, int bars) diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 5bbaee5..524d586 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -7487,16 +7487,10 @@ static int ipr_reset_restore_cfg_space(struct ipr_cmnd *ipr_cmd) { struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; volatile u32 int_reg; - int rc; ENTER; ioa_cfg->pdev->state_saved = true; - rc = pci_restore_state(ioa_cfg->pdev); - - if (rc != PCIBIOS_SUCCESSFUL) { - ipr_cmd->s.ioasa.hdr.ioasc = cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR); - return IPR_RC_JOB_CONTINUE; - } + pci_restore_state(ioa_cfg->pdev); if (ipr_set_pcix_cmd_reg(ioa_cfg)) { ipr_cmd->s.ioasa.hdr.ioasc = cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR); diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c index 300d59f..321cf3a 100644 --- a/drivers/scsi/pmcraid.c +++ b/drivers/scsi/pmcraid.c @@ -2228,12 +2228,7 @@ static void pmcraid_ioa_reset(struct pmcraid_cmd *cmd) /* Once either bist or pci reset is done, restore PCI config * space. If this fails, proceed with hard reset again */ - if (pci_restore_state(pinstance->pdev)) { - pmcraid_info("config-space error resetting again\n"); - pinstance->ioa_state = IOA_STATE_IN_RESET_ALERT; - pmcraid_reset_alert(cmd); - break; - } + pci_restore_state(pinstance->pdev); /* fail all pending commands */ pmcraid_fail_outstanding_cmds(pinstance); diff --git a/drivers/staging/sm7xx/smtcfb.c b/drivers/staging/sm7xx/smtcfb.c index 24f47d6..7162dee 100644 --- a/drivers/staging/sm7xx/smtcfb.c +++ b/drivers/staging/sm7xx/smtcfb.c @@ -1071,7 +1071,7 @@ static int __maybe_unused smtcfb_resume(struct pci_dev *pdev) /* when resuming, restore pci data and fb cursor */ if (pdev->dev.power.power_state.event != PM_EVENT_FREEZE) { retv = pci_set_power_state(pdev, PCI_D0); - retv = pci_restore_state(pdev); + pci_restore_state(pdev); if (pci_enable_device(pdev)) return -1; pci_set_master(pdev); diff --git a/include/linux/pci.h b/include/linux/pci.h index 7454408..63cbadc 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -806,7 +806,7 @@ size_t pci_get_rom_size(struct pci_dev *pdev, void __iomem *rom, size_t size); /* Power management related routines */ int pci_save_state(struct pci_dev *dev); -int pci_restore_state(struct pci_dev *dev); +void pci_restore_state(struct pci_dev *dev); int __pci_complete_power_transition(struct pci_dev *dev, pci_power_t state); int pci_set_power_state(struct pci_dev *dev, pci_power_t state); pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state); @@ -1168,10 +1168,8 @@ static inline int pci_save_state(struct pci_dev *dev) return 0; } -static inline int pci_restore_state(struct pci_dev *dev) -{ - return 0; -} +static inline void pci_restore_state(struct pci_dev *dev) +{ } static inline int pci_set_power_state(struct pci_dev *dev, pci_power_t state) { diff --git a/sound/pci/cs5535audio/cs5535audio_pm.c b/sound/pci/cs5535audio/cs5535audio_pm.c index a3301cc..185b000 100644 --- a/sound/pci/cs5535audio/cs5535audio_pm.c +++ b/sound/pci/cs5535audio/cs5535audio_pm.c @@ -90,12 +90,7 @@ int snd_cs5535audio_resume(struct pci_dev *pci) int i; pci_set_power_state(pci, PCI_D0); - if (pci_restore_state(pci) < 0) { - printk(KERN_ERR "cs5535audio: pci_restore_state failed, " - "disabling device\n"); - snd_card_disconnect(card); - return -EIO; - } + pci_restore_state(pci); if (pci_enable_device(pci) < 0) { printk(KERN_ERR "cs5535audio: pci_enable_device failed, " "disabling device\n"); -- cgit v1.1 From 23ea3793fd368fd6a1ea20659699e280e2996658 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 18 Nov 2010 15:02:31 -0800 Subject: PCI: fix __pci_device_probe kernel-doc warning Fix kernel-doc warning for __pci_device_probe(): Warning(drivers/pci/pci-driver.c:341): missing initial short description on line: * __pci_device_probe() Signed-off-by: Randy Dunlap Signed-off-by: Jesse Barnes --- drivers/pci/pci-driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 80e551e..88246dd 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -338,7 +338,7 @@ static int pci_call_probe(struct pci_driver *drv, struct pci_dev *dev, } /** - * __pci_device_probe() + * __pci_device_probe - check if a driver wants to claim a specific PCI device * @drv: driver to call to check if it wants the PCI device * @pci_dev: PCI device being probed * -- cgit v1.1 From ee8abf783dd36f65440fd782ad16f9768631d998 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 17 Nov 2010 12:10:40 -0800 Subject: PCI: Skip id checking if no id is passed Will get warning when pci stub driver is built-in kenel like: pci-stub: invalid id string "" So stop early if no id is passed. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/pci-stub.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/pci/pci-stub.c b/drivers/pci/pci-stub.c index f7b68ca..4c0336b 100644 --- a/drivers/pci/pci-stub.c +++ b/drivers/pci/pci-stub.c @@ -47,6 +47,10 @@ static int __init pci_stub_init(void) if (rc) return rc; + /* no ids passed actually */ + if (ids[0] == '\0') + return 0; + /* add ids specified in the module parameter */ p = ids; while ((id = strsep(&p, ","))) { -- cgit v1.1 From 9b444b36fee16d2aaae9cc91ce594ecb15d922a9 Mon Sep 17 00:00:00 2001 From: Seth Heasley Date: Wed, 17 Nov 2010 12:12:08 -0700 Subject: x86/PCI: irq and pci_ids patch for Intel Patsburg This patch adds an additional LPC Controller DeviceID for the Intel Patsburg PCH. Signed-off-by: Seth Heasley Signed-off-by: Jesse Barnes --- arch/x86/pci/irq.c | 3 ++- include/linux/pci_ids.h | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c index 9f9bfb7..87e6c83 100644 --- a/arch/x86/pci/irq.c +++ b/arch/x86/pci/irq.c @@ -589,7 +589,8 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route case PCI_DEVICE_ID_INTEL_ICH10_1: case PCI_DEVICE_ID_INTEL_ICH10_2: case PCI_DEVICE_ID_INTEL_ICH10_3: - case PCI_DEVICE_ID_INTEL_PATSBURG_LPC: + case PCI_DEVICE_ID_INTEL_PATSBURG_LPC_0: + case PCI_DEVICE_ID_INTEL_PATSBURG_LPC_1: r->name = "PIIX/ICH"; r->get = pirq_piix_get; r->set = pirq_piix_set; diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index cb845c1..d830106 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2468,7 +2468,8 @@ #define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN 0x1c41 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX 0x1c5f #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22 -#define PCI_DEVICE_ID_INTEL_PATSBURG_LPC 0x1d40 +#define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_0 0x1d40 +#define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_1 0x1d41 #define PCI_DEVICE_ID_INTEL_82801AA_0 0x2410 #define PCI_DEVICE_ID_INTEL_82801AA_1 0x2411 #define PCI_DEVICE_ID_INTEL_82801AA_3 0x2413 -- cgit v1.1 From 99a0fadf561e1f553c08f0a29f8b2578f55dd5f0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 22 Dec 2010 10:06:36 +0100 Subject: PCI: pci-stub: ignore zero-length id parameters pci-stub uses strsep() to separate list of ids and generates a warning message when it fails to parse an id. However, not specifying the parameter results in ids set to an empty string. strsep() happily returns the empty string as the first token and thus triggers the warning message spuriously. Make the tokner ignore zero length ids. Reported-by: Chris Wright Reported-by: Prasad Joshi Cc: stable@kernel.org Signed-off-by: Jesse Barnes --- drivers/pci/pci-stub.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/pci/pci-stub.c b/drivers/pci/pci-stub.c index 4c0336b..775e933 100644 --- a/drivers/pci/pci-stub.c +++ b/drivers/pci/pci-stub.c @@ -58,6 +58,9 @@ static int __init pci_stub_init(void) subdevice = PCI_ANY_ID, class=0, class_mask=0; int fields; + if (!strlen(id)) + continue; + fields = sscanf(id, "%x:%x:%x:%x:%x:%x", &vendor, &device, &subvendor, &subdevice, &class, &class_mask); -- cgit v1.1 From fe31e69740eddc7316071ed5165fed6703c8cd12 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 19 Dec 2010 15:57:16 +0100 Subject: PCI/PCIe: Clear Root PME Status bits early during system resume I noticed that PCI Express PMEs don't work on my Toshiba Portege R500 after the system has been woken up from a sleep state by a PME (through Wake-on-LAN). After some investigation it turned out that the BIOS didn't clear the Root PME Status bit in the root port that received the wakeup PME and since the Requester ID was also set in the port's Root Status register, any subsequent PMEs didn't trigger interrupts. This problem can be avoided by clearing the Root PME Status bits in all PCI Express root ports during early resume. For this purpose, add an early resume routine to the PCIe port driver and make this driver be always registered, even if pci_ports_disable is set (in which case the driver's only function is to provide the early resume callback). Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pcie/pme.c | 27 ++++----------------------- drivers/pci/pcie/portdrv.h | 2 ++ drivers/pci/pcie/portdrv_core.c | 25 ++++++++++++++----------- drivers/pci/pcie/portdrv_pci.c | 37 +++++++++++++++++++++++++++++++++---- include/linux/pci_regs.h | 2 ++ 5 files changed, 55 insertions(+), 38 deletions(-) diff --git a/drivers/pci/pcie/pme.c b/drivers/pci/pcie/pme.c index 2f3c904..073f030 100644 --- a/drivers/pci/pcie/pme.c +++ b/drivers/pci/pcie/pme.c @@ -26,9 +26,6 @@ #include "../pci.h" #include "portdrv.h" -#define PCI_EXP_RTSTA_PME 0x10000 /* PME status */ -#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */ - /* * If this switch is set, MSI will not be used for PCIe PME signaling. This * causes the PCIe port driver to use INTx interrupts only, but it turns out @@ -74,22 +71,6 @@ void pcie_pme_interrupt_enable(struct pci_dev *dev, bool enable) } /** - * pcie_pme_clear_status - Clear root port PME interrupt status. - * @dev: PCIe root port or event collector. - */ -static void pcie_pme_clear_status(struct pci_dev *dev) -{ - int rtsta_pos; - u32 rtsta; - - rtsta_pos = pci_pcie_cap(dev) + PCI_EXP_RTSTA; - - pci_read_config_dword(dev, rtsta_pos, &rtsta); - rtsta |= PCI_EXP_RTSTA_PME; - pci_write_config_dword(dev, rtsta_pos, rtsta); -} - -/** * pcie_pme_walk_bus - Scan a PCI bus for devices asserting PME#. * @bus: PCI bus to scan. * @@ -253,7 +234,7 @@ static void pcie_pme_work_fn(struct work_struct *work) * Clear PME status of the port. If there are other * pending PMEs, the status will be set again. */ - pcie_pme_clear_status(port); + pcie_clear_root_pme_status(port); spin_unlock_irq(&data->lock); pcie_pme_handle_request(port, rtsta & 0xffff); @@ -378,7 +359,7 @@ static int pcie_pme_probe(struct pcie_device *srv) port = srv->port; pcie_pme_interrupt_enable(port, false); - pcie_pme_clear_status(port); + pcie_clear_root_pme_status(port); ret = request_irq(srv->irq, pcie_pme_irq, IRQF_SHARED, "PCIe PME", srv); if (ret) { @@ -402,7 +383,7 @@ static int pcie_pme_suspend(struct pcie_device *srv) spin_lock_irq(&data->lock); pcie_pme_interrupt_enable(port, false); - pcie_pme_clear_status(port); + pcie_clear_root_pme_status(port); data->noirq = true; spin_unlock_irq(&data->lock); @@ -422,7 +403,7 @@ static int pcie_pme_resume(struct pcie_device *srv) spin_lock_irq(&data->lock); data->noirq = false; - pcie_pme_clear_status(port); + pcie_clear_root_pme_status(port); pcie_pme_interrupt_enable(port, true); spin_unlock_irq(&data->lock); diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h index 7b5aba0..8fcc035 100644 --- a/drivers/pci/pcie/portdrv.h +++ b/drivers/pci/pcie/portdrv.h @@ -35,6 +35,8 @@ extern void pcie_port_bus_unregister(void); struct pci_dev; +extern void pcie_clear_root_pme_status(struct pci_dev *dev); + #ifdef CONFIG_PCIE_PME extern bool pcie_pme_msi_disabled; diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index a9c222d..5130d0d 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -241,17 +241,17 @@ static int get_port_device_capability(struct pci_dev *dev) int cap_mask; int err; + if (pcie_ports_disabled) + return 0; + err = pcie_port_platform_notify(dev, &cap_mask); - if (pcie_ports_auto) { - if (err) { - pcie_no_aspm(); - return 0; - } - } else { + if (!pcie_ports_auto) { cap_mask = PCIE_PORT_SERVICE_PME | PCIE_PORT_SERVICE_HP | PCIE_PORT_SERVICE_VC; if (pci_aer_available()) cap_mask |= PCIE_PORT_SERVICE_AER; + } else if (err) { + return 0; } pos = pci_pcie_cap(dev); @@ -349,15 +349,18 @@ int pcie_port_device_register(struct pci_dev *dev) int status, capabilities, i, nr_service; int irqs[PCIE_PORT_DEVICE_MAXSERVICES]; - /* Get and check PCI Express port services */ - capabilities = get_port_device_capability(dev); - if (!capabilities) - return -ENODEV; - /* Enable PCI Express port device */ status = pci_enable_device(dev); if (status) return status; + + /* Get and check PCI Express port services */ + capabilities = get_port_device_capability(dev); + if (!capabilities) { + pcie_no_aspm(); + return 0; + } + pci_set_master(dev); /* * Initialize service irqs. Don't use service devices that diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index f9033e1..e0610bd 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -57,6 +57,22 @@ __setup("pcie_ports=", pcie_port_setup); /* global data */ +/** + * pcie_clear_root_pme_status - Clear root port PME interrupt status. + * @dev: PCIe root port or event collector. + */ +void pcie_clear_root_pme_status(struct pci_dev *dev) +{ + int rtsta_pos; + u32 rtsta; + + rtsta_pos = pci_pcie_cap(dev) + PCI_EXP_RTSTA; + + pci_read_config_dword(dev, rtsta_pos, &rtsta); + rtsta |= PCI_EXP_RTSTA_PME; + pci_write_config_dword(dev, rtsta_pos, rtsta); +} + static int pcie_portdrv_restore_config(struct pci_dev *dev) { int retval; @@ -69,6 +85,20 @@ static int pcie_portdrv_restore_config(struct pci_dev *dev) } #ifdef CONFIG_PM +static int pcie_port_resume_noirq(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + + /* + * Some BIOSes forget to clear Root PME Status bits after system wakeup + * which breaks ACPI-based runtime wakeup on PCI Express, so clear those + * bits now just in case (shouldn't hurt). + */ + if(pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT) + pcie_clear_root_pme_status(pdev); + return 0; +} + static const struct dev_pm_ops pcie_portdrv_pm_ops = { .suspend = pcie_port_device_suspend, .resume = pcie_port_device_resume, @@ -76,6 +106,7 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops = { .thaw = pcie_port_device_resume, .poweroff = pcie_port_device_suspend, .restore = pcie_port_device_resume, + .resume_noirq = pcie_port_resume_noirq, }; #define PCIE_PORTDRV_PM_OPS (&pcie_portdrv_pm_ops) @@ -327,10 +358,8 @@ static int __init pcie_portdrv_init(void) { int retval; - if (pcie_ports_disabled) { - pcie_no_aspm(); - return -EACCES; - } + if (pcie_ports_disabled) + return pci_register_driver(&pcie_portdriver); dmi_check_system(pcie_portdrv_dmi_table); diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index d4f2c80..5b7e6b1 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -504,6 +504,8 @@ #define PCI_EXP_RTCTL_CRSSVE 0x10 /* CRS Software Visibility Enable */ #define PCI_EXP_RTCAP 30 /* Root Capabilities */ #define PCI_EXP_RTSTA 32 /* Root Status */ +#define PCI_EXP_RTSTA_PME 0x10000 /* PME status */ +#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */ #define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */ #define PCI_EXP_DEVCAP2_ARI 0x20 /* Alternative Routing-ID */ #define PCI_EXP_DEVCTL2 40 /* Device Control 2 */ -- cgit v1.1 From 6e8af08dfa40b747002207d3ce8e8b43a050d99f Mon Sep 17 00:00:00 2001 From: "Narendra_K@Dell.com" Date: Tue, 14 Dec 2010 09:57:12 -0800 Subject: PCI: enable pci=bfsort by default on future Dell systems This patch enables pci=bfsort by default on future Dell systems. It reads SMBIOS type 0xB1 vendor specific record and sets pci=bfsort accordingly. Offset Name Length Value Description 04 Flags0 Word Varies Bits 9-10 - 10:9 = 00 Unknown - 10:9 = 01 Breadth First - 10:9 = 10 Depth First - 10:9 = 11 Reserved 1. Any time pci=bfsort has to be enabled on a system, we need to add the model number of the system to the white list. With this patch, that is not required. 2. Typically, model number has to be added to the white list when the system is under development. With this change, that is not required. Signed-off-by: Jordan Hargrave Signed-off-by: Narendra K Signed-off-by: Jesse Barnes --- arch/x86/pci/common.c | 41 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index f7c8a39..5fe7502 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -22,6 +22,7 @@ unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 | unsigned int pci_early_dump_regs; static int pci_bf_sort; +static int smbios_type_b1_flag; int pci_routeirq; int noioapicquirk; #ifdef CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS @@ -185,6 +186,39 @@ static int __devinit set_bf_sort(const struct dmi_system_id *d) return 0; } +static void __devinit read_dmi_type_b1(const struct dmi_header *dm, + void *private_data) +{ + u8 *d = (u8 *)dm + 4; + + if (dm->type != 0xB1) + return; + switch (((*(u32 *)d) >> 9) & 0x03) { + case 0x00: + printk(KERN_INFO "dmi type 0xB1 record - unknown flag\n"); + break; + case 0x01: /* set pci=bfsort */ + smbios_type_b1_flag = 1; + break; + case 0x02: /* do not set pci=bfsort */ + smbios_type_b1_flag = 2; + break; + default: + break; + } +} + +static int __devinit find_sort_method(const struct dmi_system_id *d) +{ + dmi_walk(read_dmi_type_b1, NULL); + + if (smbios_type_b1_flag == 1) { + set_bf_sort(d); + return 0; + } + return -1; +} + /* * Enable renumbering of PCI bus# ranges to reach all PCI busses (Cardbus) */ @@ -213,6 +247,13 @@ static const struct dmi_system_id __devinitconst pciprobe_dmi_table[] = { }, #endif /* __i386__ */ { + .callback = find_sort_method, + .ident = "Dell System", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"), + }, + }, + { .callback = set_bf_sort, .ident = "Dell PowerEdge 1950", .matches = { -- cgit v1.1 From 415e12b2379239973feab91850b0dce985c6058a Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 7 Jan 2011 00:55:09 +0100 Subject: PCI/ACPI: Request _OSC control once for each root bridge (v3) Move the evaluation of acpi_pci_osc_control_set() (to request control of PCI Express native features) into acpi_pci_root_add() to avoid calling it many times for the same root complex with the same arguments. Additionally, check if all of the requisite _OSC support bits are set before calling acpi_pci_osc_control_set() for a given root complex. References: https://bugzilla.kernel.org/show_bug.cgi?id=20232 Reported-by: Ozan Caglayan Tested-by: Ozan Caglayan Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/acpi/apei/hest.c | 22 +++++++++------------- drivers/acpi/pci_root.c | 35 +++++++++++++++++++++++++++++++++++ drivers/pci/pci.h | 8 -------- drivers/pci/pcie/aer/aerdrv.c | 1 + drivers/pci/pcie/aer/aerdrv.h | 3 --- drivers/pci/pcie/portdrv.h | 3 --- drivers/pci/pcie/portdrv_acpi.c | 23 ++++------------------- include/acpi/apei.h | 6 ++++++ include/linux/pci-acpi.h | 6 ++++++ include/linux/pci.h | 11 +++++++++++ 10 files changed, 72 insertions(+), 46 deletions(-) diff --git a/drivers/acpi/apei/hest.c b/drivers/acpi/apei/hest.c index daa7bc6..4ee58e7 100644 --- a/drivers/acpi/apei/hest.c +++ b/drivers/acpi/apei/hest.c @@ -195,24 +195,24 @@ static int __init setup_hest_disable(char *str) __setup("hest_disable", setup_hest_disable); -static int __init hest_init(void) +void __init acpi_hest_init(void) { acpi_status status; int rc = -ENODEV; unsigned int ghes_count = 0; if (acpi_disabled) - goto err; + return; if (hest_disable) { - pr_info(HEST_PFX "HEST tabling parsing is disabled.\n"); - goto err; + pr_info(HEST_PFX "Table parsing disabled.\n"); + return; } status = acpi_get_table(ACPI_SIG_HEST, 0, (struct acpi_table_header **)&hest_tab); if (status == AE_NOT_FOUND) { - pr_info(HEST_PFX "Table is not found!\n"); + pr_info(HEST_PFX "Table not found.\n"); goto err; } else if (ACPI_FAILURE(status)) { const char *msg = acpi_format_exception(status); @@ -226,15 +226,11 @@ static int __init hest_init(void) goto err; rc = hest_ghes_dev_register(ghes_count); - if (rc) - goto err; - - pr_info(HEST_PFX "HEST table parsing is initialized.\n"); + if (!rc) { + pr_info(HEST_PFX "Table parsing has been initialized.\n"); + return; + } - return 0; err: hest_disable = 1; - return rc; } - -subsys_initcall(hest_init); diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 96668ad..d976679 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -36,6 +36,7 @@ #include #include #include +#include #define PREFIX "ACPI: " @@ -47,6 +48,11 @@ static int acpi_pci_root_add(struct acpi_device *device); static int acpi_pci_root_remove(struct acpi_device *device, int type); static int acpi_pci_root_start(struct acpi_device *device); +#define ACPI_PCIE_REQ_SUPPORT (OSC_EXT_PCI_CONFIG_SUPPORT \ + | OSC_ACTIVE_STATE_PWR_SUPPORT \ + | OSC_CLOCK_PWR_CAPABILITY_SUPPORT \ + | OSC_MSI_SUPPORT) + static const struct acpi_device_id root_device_ids[] = { {"PNP0A03", 0}, {"", 0}, @@ -566,6 +572,33 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device) if (flags != base_flags) acpi_pci_osc_support(root, flags); + if (!pcie_ports_disabled + && (flags & ACPI_PCIE_REQ_SUPPORT) == ACPI_PCIE_REQ_SUPPORT) { + flags = OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL + | OSC_PCI_EXPRESS_NATIVE_HP_CONTROL + | OSC_PCI_EXPRESS_PME_CONTROL; + + if (pci_aer_available()) { + if (aer_acpi_firmware_first()) + dev_dbg(root->bus->bridge, + "PCIe errors handled by BIOS.\n"); + else + flags |= OSC_PCI_EXPRESS_AER_CONTROL; + } + + dev_info(root->bus->bridge, + "Requesting ACPI _OSC control (0x%02x)\n", flags); + + status = acpi_pci_osc_control_set(device->handle, &flags, + OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL); + if (ACPI_SUCCESS(status)) + dev_info(root->bus->bridge, + "ACPI _OSC control (0x%02x) granted\n", flags); + else + dev_dbg(root->bus->bridge, + "ACPI _OSC request failed (code %d)\n", status); + } + pci_acpi_add_bus_pm_notifier(device, root->bus); if (device->wakeup.flags.run_wake) device_set_run_wake(root->bus->bridge, true); @@ -603,6 +636,8 @@ static int __init acpi_pci_root_init(void) if (acpi_pci_disabled) return 0; + acpi_hest_init(); + pci_acpi_crs_quirks(); if (acpi_bus_register_driver(&acpi_pci_root_driver) < 0) return -ENODEV; diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 7d33f66..16ae965 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -140,14 +140,6 @@ static inline void pci_no_msi(void) { } static inline void pci_msi_init_pci_dev(struct pci_dev *dev) { } #endif -#ifdef CONFIG_PCIEAER -void pci_no_aer(void); -bool pci_aer_available(void); -#else -static inline void pci_no_aer(void) { } -static inline bool pci_aer_available(void) { return false; } -#endif - static inline int pci_no_d1d2(struct pci_dev *dev) { unsigned int parent_dstates = 0; diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c index 2b2b650..58ad791 100644 --- a/drivers/pci/pcie/aer/aerdrv.c +++ b/drivers/pci/pcie/aer/aerdrv.c @@ -17,6 +17,7 @@ #include #include +#include #include #include #include diff --git a/drivers/pci/pcie/aer/aerdrv.h b/drivers/pci/pcie/aer/aerdrv.h index 9656e30..80c11d1 100644 --- a/drivers/pci/pcie/aer/aerdrv.h +++ b/drivers/pci/pcie/aer/aerdrv.h @@ -132,7 +132,6 @@ static inline int aer_osc_setup(struct pcie_device *pciedev) #ifdef CONFIG_ACPI_APEI extern int pcie_aer_get_firmware_first(struct pci_dev *pci_dev); -extern bool aer_acpi_firmware_first(void); #else static inline int pcie_aer_get_firmware_first(struct pci_dev *pci_dev) { @@ -140,8 +139,6 @@ static inline int pcie_aer_get_firmware_first(struct pci_dev *pci_dev) return pci_dev->__aer_firmware_first; return 0; } - -static inline bool aer_acpi_firmware_first(void) { return false; } #endif static inline void pcie_aer_force_firmware_first(struct pci_dev *pci_dev, diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h index 8fcc035..bd00a01 100644 --- a/drivers/pci/pcie/portdrv.h +++ b/drivers/pci/pcie/portdrv.h @@ -20,9 +20,6 @@ #define get_descriptor_id(type, service) (((type - 4) << 4) | service) -extern bool pcie_ports_disabled; -extern bool pcie_ports_auto; - extern struct bus_type pcie_port_bus_type; extern int pcie_port_device_register(struct pci_dev *dev); #ifdef CONFIG_PM diff --git a/drivers/pci/pcie/portdrv_acpi.c b/drivers/pci/pcie/portdrv_acpi.c index 5982b6a..a86b56e 100644 --- a/drivers/pci/pcie/portdrv_acpi.c +++ b/drivers/pci/pcie/portdrv_acpi.c @@ -33,7 +33,7 @@ */ int pcie_port_acpi_setup(struct pci_dev *port, int *srv_mask) { - acpi_status status; + struct acpi_pci_root *root; acpi_handle handle; u32 flags; @@ -44,26 +44,11 @@ int pcie_port_acpi_setup(struct pci_dev *port, int *srv_mask) if (!handle) return -EINVAL; - flags = OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL - | OSC_PCI_EXPRESS_NATIVE_HP_CONTROL - | OSC_PCI_EXPRESS_PME_CONTROL; - - if (pci_aer_available()) { - if (aer_acpi_firmware_first()) - dev_dbg(&port->dev, "PCIe errors handled by BIOS.\n"); - else - flags |= OSC_PCI_EXPRESS_AER_CONTROL; - } - - status = acpi_pci_osc_control_set(handle, &flags, - OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL); - if (ACPI_FAILURE(status)) { - dev_dbg(&port->dev, "ACPI _OSC request failed (code %d)\n", - status); + root = acpi_pci_find_root(handle); + if (!root) return -ENODEV; - } - dev_info(&port->dev, "ACPI _OSC control granted for 0x%02x\n", flags); + flags = root->osc_control_set; *srv_mask = PCIE_PORT_SERVICE_VC; if (flags & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL) diff --git a/include/acpi/apei.h b/include/acpi/apei.h index b336502..c4dbb13 100644 --- a/include/acpi/apei.h +++ b/include/acpi/apei.h @@ -19,6 +19,12 @@ extern int hest_disable; extern int erst_disable; +#ifdef CONFIG_ACPI_APEI +void __init acpi_hest_init(void); +#else +static inline void acpi_hest_init(void) { return; } +#endif + typedef int (*apei_hest_func_t)(struct acpi_hest_header *hest_hdr, void *data); int apei_hest_parse(apei_hest_func_t func, void *data); diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h index c8b6473..479d9bb 100644 --- a/include/linux/pci-acpi.h +++ b/include/linux/pci-acpi.h @@ -40,4 +40,10 @@ static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev) { return NULL; } #endif +#ifdef CONFIG_ACPI_APEI +extern bool aer_acpi_firmware_first(void); +#else +static inline bool aer_acpi_firmware_first(void) { return false; } +#endif + #endif /* _PCI_ACPI_H_ */ diff --git a/include/linux/pci.h b/include/linux/pci.h index 63cbadc..12dd86a 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -994,6 +994,9 @@ extern void pci_restore_msi_state(struct pci_dev *dev); extern int pci_msi_enabled(void); #endif +extern bool pcie_ports_disabled; +extern bool pcie_ports_auto; + #ifndef CONFIG_PCIEASPM static inline int pcie_aspm_enabled(void) { @@ -1003,6 +1006,14 @@ static inline int pcie_aspm_enabled(void) extern int pcie_aspm_enabled(void); #endif +#ifdef CONFIG_PCIEAER +void pci_no_aer(void); +bool pci_aer_available(void); +#else +static inline void pci_no_aer(void) { } +static inline bool pci_aer_available(void) { return false; } +#endif + #ifndef CONFIG_PCIE_ECRC static inline void pcie_set_ecrc_checking(struct pci_dev *dev) { -- cgit v1.1 From 30e664afb5cb597dd6f7651e6d116e10b9741084 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 6 Jan 2011 10:12:24 -0700 Subject: x86/PCI: don't use native Broadcom CNB20LE driver when ACPI is available The broadcom_bus.c quirk was written (without benefit of documentation) to support PCI hotplug on an old system that doesn't have ACPI. As such, we should only use it when the system doesn't have ACPI. If the system does have ACPI and we need the host bridge description, we should get it from the ACPI _CRS method. On machines older than 2008, we currently ignore _CRS, but that doesn't mean we should use broadcom_bus.c. It means we should either (a) do what we've done in the past and assume everything in the PCI gap is routed to bus 0 (so hotplug may not work), or (b) arrange to use _CRS. This patch does (a). Reference: https://bugzilla.redhat.com/show_bug.cgi?id=665109 Acked-by: Ira W. Snyder Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes --- arch/x86/pci/broadcom_bus.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/arch/x86/pci/broadcom_bus.c b/arch/x86/pci/broadcom_bus.c index 0846a5b..ab8269b 100644 --- a/arch/x86/pci/broadcom_bus.c +++ b/arch/x86/pci/broadcom_bus.c @@ -9,6 +9,7 @@ * option) any later version. */ +#include #include #include #include @@ -25,12 +26,14 @@ static void __devinit cnb20le_res(struct pci_dev *dev) u8 fbus, lbus; int i; +#ifdef CONFIG_ACPI /* - * The x86_pci_root_bus_res_quirks() function already refuses to use - * this information if ACPI _CRS was used. Therefore, we don't bother - * checking if ACPI is enabled, and just generate the information - * for both the ACPI _CRS and no ACPI cases. + * We should get host bridge information from ACPI unless the BIOS + * doesn't support it. */ + if (acpi_os_get_root_pointer()) + return; +#endif info = &pci_root_info[pci_root_num]; pci_root_num++; -- cgit v1.1 From 64a5fed6663edcf7e3864ed5534e42e2b9f340c7 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 6 Jan 2011 10:12:30 -0700 Subject: x86/PCI: make Broadcom CNB20LE driver EMBEDDED and EXPERIMENTAL This functionality is known to be incomplete, so discourage its use in general-purpose kernels. The only reason to use this driver is to support PCI hotplug on CNB20LE- based machines that don't have ACPI, and there are very few such systems. Reference: https://bugzilla.redhat.com/show_bug.cgi?id=665109 Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes --- arch/x86/Kconfig | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index e330da2..5c5666d 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1907,13 +1907,19 @@ config PCI_MMCONFIG depends on X86_64 && PCI && ACPI config PCI_CNB20LE_QUIRK - bool "Read CNB20LE Host Bridge Windows" - depends on PCI + bool "Read CNB20LE Host Bridge Windows" if EMBEDDED + default n + depends on PCI && EXPERIMENTAL help Read the PCI windows out of the CNB20LE host bridge. This allows PCI hotplug to work on systems with the CNB20LE chipset which do not have ACPI. + There's no public spec for this chipset, and this functionality + is known to be incomplete. + + You should say N unless you know you need this. + config DMAR bool "Support for DMA Remapping Devices (EXPERIMENTAL)" depends on PCI_MSI && ACPI && EXPERIMENTAL -- cgit v1.1 From ff29530e651a3449aea6b0ef4c7048db9e22ef27 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Wed, 5 Jan 2011 10:26:41 -0700 Subject: PCI: sysfs: Update ROM to include default owner write access The PCI sysfs ROM interface requires an enabling write to access the ROM image, but the default file mode is 0400. The original proposed patch adding sysfs ROM support was a true read-only interface, with the enabling bit coming in as a feature request. I suspect it was simply an oversight that the file mode didn't get updated to match the API. Acked-by: Chris Wright Signed-off-by: Alex Williamson Signed-off-by: Jesse Barnes --- drivers/pci/pci-sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 63d5042..8ecaac9 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -1149,7 +1149,7 @@ int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev) sysfs_bin_attr_init(attr); attr->size = rom_size; attr->attr.name = "rom"; - attr->attr.mode = S_IRUSR; + attr->attr.mode = S_IRUSR | S_IWUSR; attr->read = pci_read_rom; attr->write = pci_write_rom; retval = sysfs_create_bin_file(&pdev->dev.kobj, attr); -- cgit v1.1 From b6e335aeeb114dccb07eaa09e8b62ff9510cf745 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 29 Dec 2010 13:21:23 +0100 Subject: PCI/PM: Use pm_wakeup_event() directly for reporting wakeup events After recent changes related to wakeup events pm_wakeup_event() automatically checks if the given device is configured to signal wakeup, so pci_wakeup_event() may be a static inline function calling pm_wakeup_event() directly. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 16 ---------------- drivers/pci/pci.h | 6 ++++++ include/linux/pci.h | 1 - 3 files changed, 6 insertions(+), 17 deletions(-) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 6762dca..bf7ad2c 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1297,22 +1297,6 @@ bool pci_check_pme_status(struct pci_dev *dev) return ret; } -/* - * Time to wait before the system can be put into a sleep state after reporting - * a wakeup event signaled by a PCI device. - */ -#define PCI_WAKEUP_COOLDOWN 100 - -/** - * pci_wakeup_event - Report a wakeup event related to a given PCI device. - * @dev: Device to report the wakeup event for. - */ -void pci_wakeup_event(struct pci_dev *dev) -{ - if (device_may_wakeup(&dev->dev)) - pm_wakeup_event(&dev->dev, PCI_WAKEUP_COOLDOWN); -} - /** * pci_pme_wakeup - Wake up a PCI device if its PME Status bit is set. * @dev: Device to handle. diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 16ae965..f69d6e0 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -74,6 +74,12 @@ extern void pci_pm_init(struct pci_dev *dev); extern void platform_pci_wakeup_init(struct pci_dev *dev); extern void pci_allocate_cap_save_buffers(struct pci_dev *dev); +static inline void pci_wakeup_event(struct pci_dev *dev) +{ + /* Wait 100 ms before the system can be put into a sleep state. */ + pm_wakeup_event(&dev->dev, 100); +} + static inline bool pci_is_bridge(struct pci_dev *pci_dev) { return !!(pci_dev->subordinate); diff --git a/include/linux/pci.h b/include/linux/pci.h index 12dd86a..9e67dcd 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -820,7 +820,6 @@ int pci_prepare_to_sleep(struct pci_dev *dev); int pci_back_from_sleep(struct pci_dev *dev); bool pci_dev_run_wake(struct pci_dev *dev); bool pci_check_pme_status(struct pci_dev *dev); -void pci_wakeup_event(struct pci_dev *dev); void pci_pme_wakeup_bus(struct pci_bus *bus); static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state, -- cgit v1.1 From 0f953bf6b4efa0daddb7c418130a9bd3ee97f7ed Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 29 Dec 2010 13:22:08 +0100 Subject: PCI/PM: Report wakeup events before resuming devices Make wakeup events be reported by the PCI subsystem before attempting to resume devices or queuing up runtime resume requests for them, because wakeup events should be reported as soon as they have been detected. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci-acpi.c | 2 +- drivers/pci/pci.c | 2 +- drivers/pci/pcie/pme.c | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index d7ea699..6fe0772 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -46,9 +46,9 @@ static void pci_acpi_wake_dev(acpi_handle handle, u32 event, void *context) struct pci_dev *pci_dev = context; if (event == ACPI_NOTIFY_DEVICE_WAKE && pci_dev) { + pci_wakeup_event(pci_dev); pci_check_pme_status(pci_dev); pm_runtime_resume(&pci_dev->dev); - pci_wakeup_event(pci_dev); if (pci_dev->subordinate) pci_pme_wakeup_bus(pci_dev->subordinate); } diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index bf7ad2c..b714d78 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1308,8 +1308,8 @@ bool pci_check_pme_status(struct pci_dev *dev) static int pci_pme_wakeup(struct pci_dev *dev, void *ign) { if (pci_check_pme_status(dev)) { - pm_request_resume(&dev->dev); pci_wakeup_event(dev); + pm_request_resume(&dev->dev); } return 0; } diff --git a/drivers/pci/pcie/pme.c b/drivers/pci/pcie/pme.c index 073f030..0057344 100644 --- a/drivers/pci/pcie/pme.c +++ b/drivers/pci/pcie/pme.c @@ -84,8 +84,8 @@ static bool pcie_pme_walk_bus(struct pci_bus *bus) list_for_each_entry(dev, &bus->devices, bus_list) { /* Skip PCIe devices in case we started from a root port. */ if (!pci_is_pcie(dev) && pci_check_pme_status(dev)) { - pm_request_resume(&dev->dev); pci_wakeup_event(dev); + pm_request_resume(&dev->dev); ret = true; } @@ -187,8 +187,8 @@ static void pcie_pme_handle_request(struct pci_dev *port, u16 req_id) /* The device is there, but we have to check its PME status. */ found = pci_check_pme_status(dev); if (found) { - pm_request_resume(&dev->dev); pci_wakeup_event(dev); + pm_request_resume(&dev->dev); } pci_dev_put(dev); } else if (devfn) { -- cgit v1.1