From 1448652a54b5de5189a217374706700275b857e6 Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Fri, 2 Dec 2005 11:14:41 -0600 Subject: [IA64] Updates to the sn2_defconfig for 2.6.15. This updates the sn2_defconfig file for the Altix 330 hardware, enables the AGP graphics for the SGI Prism, and removes prompts for the remainder of the new features. Greg Edwards reviewed the changes. Signed-off-by: Robin Holt Signed-off-by: Greg Edwards Signed-off-by: Tony Luck --- arch/ia64/configs/sn2_defconfig | 152 ++++++++++++++++++++++++++++------------ 1 file changed, 109 insertions(+), 43 deletions(-) (limited to 'arch/ia64') diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig index 87cfd31..e1924cc 100644 --- a/arch/ia64/configs/sn2_defconfig +++ b/arch/ia64/configs/sn2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc6 -# Tue Aug 16 14:40:41 2005 +# Linux kernel version: 2.6.15-rc4 +# Fri Dec 2 10:33:48 2005 # # @@ -16,6 +16,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -26,6 +27,7 @@ CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_CPUSETS=y +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y @@ -56,11 +58,29 @@ CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Processor type and features # CONFIG_IA64=y CONFIG_64BIT=y CONFIG_MMU=y +CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y @@ -68,6 +88,7 @@ CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_IA64_UNCACHED_ALLOCATOR=y +CONFIG_ZONE_DMA_IS_DMA32=y # CONFIG_IA64_GENERIC is not set # CONFIG_IA64_DIG is not set # CONFIG_IA64_HP_ZX1 is not set @@ -87,14 +108,10 @@ CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_IA64_L1_CACHE_SHIFT=7 -CONFIG_NUMA=y -CONFIG_VIRTUAL_MEM_MAP=y -CONFIG_HOLES_IN_ZONE=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y # CONFIG_IA64_CYCLONE is not set CONFIG_IOSAPIC=y CONFIG_IA64_SGI_SN_XP=m -CONFIG_FORCE_MAX_ZONEORDER=18 +CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=512 # CONFIG_HOTPLUG_CPU is not set @@ -107,7 +124,17 @@ CONFIG_DISCONTIGMEM_MANUAL=y CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y -CONFIG_HAVE_DEC_LOCK=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y +CONFIG_NUMA=y +CONFIG_VIRTUAL_MEM_MAP=y +CONFIG_HOLES_IN_ZONE=y +CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y @@ -126,28 +153,35 @@ CONFIG_BINFMT_ELF=y # Power management and ACPI # CONFIG_PM=y -CONFIG_ACPI=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set # # ACPI (Advanced Configuration and Power Interface) Support # +CONFIG_ACPI=y # CONFIG_ACPI_BUTTON is not set # CONFIG_ACPI_FAN is not set # CONFIG_ACPI_PROCESSOR is not set CONFIG_ACPI_NUMA=y +CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set # +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# # Bus options (PCI, PCMCIA) # CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y # CONFIG_PCI_DEBUG is not set # @@ -191,8 +225,8 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y CONFIG_IPV6=m @@ -205,6 +239,11 @@ CONFIG_IPV6=m # CONFIG_NETFILTER is not set # +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set @@ -220,8 +259,11 @@ CONFIG_IPV6=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set # # Network testing @@ -230,6 +272,7 @@ CONFIG_IPV6=m # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -244,6 +287,11 @@ CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set @@ -275,16 +323,7 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -349,6 +388,7 @@ CONFIG_IDEDMA_AUTO=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -375,11 +415,13 @@ CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y -# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=y # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -389,15 +431,19 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set CONFIG_SCSI_SATA=y # CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set +# CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set -# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIL24 is not set # CONFIG_SCSI_SATA_SIS is not set # CONFIG_SCSI_SATA_ULI is not set # CONFIG_SCSI_SATA_VIA is not set @@ -411,7 +457,6 @@ CONFIG_SCSI_SATA_VITESSE=y # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y -# CONFIG_SCSI_QLOGIC_1280_1040 is not set CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA21XX is not set CONFIG_SCSI_QLA22XX=y @@ -451,6 +496,7 @@ CONFIG_DM_MULTIPATH_EMC=m CONFIG_FUSION=y CONFIG_FUSION_SPI=y CONFIG_FUSION_FC=y +CONFIG_FUSION_SAS=y CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_CTL=m @@ -479,6 +525,10 @@ CONFIG_NETDEVICES=y # CONFIG_ARCNET is not set # +# PHY device support +# + +# # Ethernet (10 or 100Mbit) # # CONFIG_NET_ETHERNET is not set @@ -493,6 +543,7 @@ CONFIG_NETDEVICES=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set CONFIG_TIGON3=y @@ -501,10 +552,10 @@ CONFIG_TIGON3=y # # Ethernet (10000 Mbit) # +CONFIG_CHELSIO_T1=m # CONFIG_IXGB is not set CONFIG_S2IO=m # CONFIG_S2IO_NAPI is not set -# CONFIG_2BUFF_MODE is not set # # Token Ring devices @@ -583,6 +634,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set @@ -629,7 +681,8 @@ CONFIG_EFI_RTC=y # # Ftape, the floppy tape device driver # -# CONFIG_AGP is not set +CONFIG_AGP=y +CONFIG_AGP_SGI_TIOCA=y # CONFIG_DRM is not set CONFIG_RAW_DRIVER=m # CONFIG_HPET is not set @@ -641,12 +694,12 @@ CONFIG_MMTIMER=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support # # CONFIG_I2C is not set -# CONFIG_I2C_SENSOR is not set # # Dallas's 1-wire bus @@ -657,12 +710,17 @@ CONFIG_MMTIMER=y # Hardware Monitoring support # # CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set # # Misc devices # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -721,12 +779,15 @@ CONFIG_USB_UHCI_HCD=m # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set @@ -751,9 +812,11 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_MTOUCH is not set # CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices @@ -824,11 +887,13 @@ CONFIG_USB_MON=y # InfiniBand support # CONFIG_INFINIBAND=m -CONFIG_INFINIBAND_USER_VERBS=m +# CONFIG_INFINIBAND_USER_MAD is not set +CONFIG_INFINIBAND_USER_ACCESS=m CONFIG_INFINIBAND_MTHCA=m # CONFIG_INFINIBAND_MTHCA_DEBUG is not set CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_DEBUG is not set +CONFIG_INFINIBAND_SRP=m # # SN Devices @@ -858,16 +923,12 @@ CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# CONFIG_XFS_FS=y CONFIG_XFS_EXPORT=y -CONFIG_XFS_RT=y CONFIG_XFS_QUOTA=y # CONFIG_XFS_SECURITY is not set CONFIG_XFS_POSIX_ACL=y +CONFIG_XFS_RT=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -878,6 +939,7 @@ CONFIG_QUOTACTL=y CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m # # CD-ROM/DVD Filesystems @@ -904,13 +966,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -CONFIG_TMPFS_XATTR=y -CONFIG_TMPFS_SECURITY=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y +CONFIG_RELAYFS_FS=m # # Miscellaneous filesystems @@ -959,6 +1019,7 @@ CONFIG_CIFS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -1028,18 +1089,21 @@ CONFIG_NLS_UTF8=y # Library routines # # CONFIG_CRC_CCITT is not set +CONFIG_CRC16=m CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set +CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m CONFIG_GENERIC_ALLOCATOR=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y # -# Profiling support +# Instrumentation Support # # CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set # # Kernel hacking @@ -1048,6 +1112,7 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=20 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set CONFIG_DEBUG_PREEMPT=y @@ -1056,7 +1121,8 @@ CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FS is not set -# CONFIG_KPROBES is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set # CONFIG_IA64_PRINT_HAZARDS is not set @@ -1097,7 +1163,7 @@ CONFIG_CRYPTO_DES=m # CONFIG_CRYPTO_ANUBIS is not set CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_TEST is not set # -- cgit v1.1 From 885da19e8044051a92cfd70099398c373245c431 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Fri, 2 Dec 2005 16:18:42 -0800 Subject: [IA64] refresh tiger_defconfig ready for 2.6.15 Signed-off-by: Tony Luck --- arch/ia64/configs/tiger_defconfig | 74 ++++++++++++++++++++++++++------------- 1 file changed, 50 insertions(+), 24 deletions(-) (limited to 'arch/ia64') diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig index 9bc8bca..b1e8f09 100644 --- a/arch/ia64/configs/tiger_defconfig +++ b/arch/ia64/configs/tiger_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc1 -# Wed Sep 14 15:17:57 2005 +# Linux kernel version: 2.6.15-rc4 +# Fri Dec 2 16:06:32 2005 # # @@ -59,17 +59,36 @@ CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # Processor type and features # CONFIG_IA64=y CONFIG_64BIT=y CONFIG_MMU=y +CONFIG_SWIOTLB=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ZONE_DMA_IS_DMA32=y # CONFIG_IA64_GENERIC is not set CONFIG_IA64_DIG=y # CONFIG_IA64_HP_ZX1 is not set @@ -82,18 +101,16 @@ CONFIG_MCKINLEY=y # CONFIG_IA64_PAGE_SIZE_8KB is not set CONFIG_IA64_PAGE_SIZE_16KB=y # CONFIG_IA64_PAGE_SIZE_64KB is not set +CONFIG_PGTABLE_3=y +# CONFIG_PGTABLE_4 is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_IA64_L1_CACHE_SHIFT=7 -# CONFIG_NUMA is not set -CONFIG_VIRTUAL_MEM_MAP=y -CONFIG_HOLES_IN_ZONE=y CONFIG_IA64_CYCLONE=y CONFIG_IOSAPIC=y -# CONFIG_IA64_SGI_SN_XP is not set -CONFIG_FORCE_MAX_ZONEORDER=18 +CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=4 CONFIG_HOTPLUG_CPU=y @@ -106,7 +123,13 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set -CONFIG_HAVE_DEC_LOCK=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_VIRTUAL_MEM_MAP=y +CONFIG_HOLES_IN_ZONE=y CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y @@ -118,7 +141,6 @@ CONFIG_IA64_PALINFO=y # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y -# CONFIG_DELL_RBU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m @@ -126,6 +148,7 @@ CONFIG_BINFMT_MISC=m # Power management and ACPI # CONFIG_PM=y +CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set # @@ -226,14 +249,16 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set # # Network testing # # CONFIG_NET_PKTGEN is not set -# CONFIG_NETFILTER_NETLINK is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -295,14 +320,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -400,6 +417,7 @@ CONFIG_SCSI_FC_ATTRS=y # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -409,6 +427,7 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -424,7 +443,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_QLOGIC_FC=y # CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set CONFIG_SCSI_QLOGIC_1280=y -# CONFIG_SCSI_QLOGIC_1280_1040 is not set CONFIG_SCSI_QLA2XXX=y CONFIG_SCSI_QLA21XX=m CONFIG_SCSI_QLA22XX=m @@ -463,6 +481,7 @@ CONFIG_DM_ZERO=m CONFIG_FUSION=y CONFIG_FUSION_SPI=y CONFIG_FUSION_FC=y +# CONFIG_FUSION_SAS is not set CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_CTL=y @@ -503,6 +522,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -727,6 +747,7 @@ CONFIG_MAX_RAW_DEVS=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -812,12 +833,15 @@ CONFIG_USB_UHCI_HCD=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -1123,9 +1147,10 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y # -# Profiling support +# Instrumentation Support # # CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set # # Kernel hacking @@ -1142,7 +1167,8 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set -# CONFIG_KPROBES is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set # CONFIG_IA64_PRINT_HAZARDS is not set -- cgit v1.1 From 05f70395c642bed0300bc1955bfa8c0f93de2bc2 Mon Sep 17 00:00:00 2001 From: Keith Owens Date: Fri, 2 Dec 2005 13:40:15 +1100 Subject: [IA64] Allow salinfo_decode to detect signals on read Return -EINTR instead of -ERESTARTSYS when signals are delivered during a blocked read of /proc/sal/*/event. This allows salinfo_decode to detect signals when it is blocked on a read of those files. Signed-off-by: Keith Owens Signed-off-by: Tony Luck --- arch/ia64/kernel/salinfo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/ia64') diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c index ca68e6e..1461dc6 100644 --- a/arch/ia64/kernel/salinfo.c +++ b/arch/ia64/kernel/salinfo.c @@ -293,7 +293,7 @@ retry: if (file->f_flags & O_NONBLOCK) return -EAGAIN; if (down_interruptible(&data->sem)) - return -ERESTARTSYS; + return -EINTR; } n = data->cpu_check; -- cgit v1.1 From 3ec829b6895092b0686254c315f42642b4a07efc Mon Sep 17 00:00:00 2001 From: John Keller Date: Tue, 29 Nov 2005 16:36:32 -0600 Subject: [IA64-SGI] altix: pci_window fixup Altix only patch to add fixup code that sets up pci_controller->window. This code is a temporary fix until ACPI support on Altix is added. Also, corrects the usage of pci_dev->sysdata, which had previously been used to reference platform specific device info, to now point to a pci_controller struct. Signed-off-by: John Keller Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/io_init.c | 153 ++++++++++++++++++++++++++++++++++++------ 1 file changed, 131 insertions(+), 22 deletions(-) (limited to 'arch/ia64') diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c index 05e4ea8..318087e 100644 --- a/arch/ia64/sn/kernel/io_init.c +++ b/arch/ia64/sn/kernel/io_init.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved. */ #include @@ -147,6 +147,24 @@ sal_get_pcidev_info(u64 segment, u64 bus_number, u64 devfn, u64 pci_dev, } /* + * sn_pcidev_info_get() - Retrieve the pcidev_info struct for the specified + * device. + */ +inline struct pcidev_info * +sn_pcidev_info_get(struct pci_dev *dev) +{ + struct pcidev_info *pcidev; + + list_for_each_entry(pcidev, + &(SN_PCI_CONTROLLER(dev)->pcidev_info), pdi_list) { + if (pcidev->pdi_linux_pcidev == dev) { + return pcidev; + } + } + return NULL; +} + +/* * sn_fixup_ionodes() - This routine initializes the HUB data strcuture for * each node in the system. */ @@ -229,6 +247,50 @@ static void sn_fixup_ionodes(void) } +/* + * sn_pci_window_fixup() - Create a pci_window for each device resource. + * Until ACPI support is added, we need this code + * to setup pci_windows for use by + * pcibios_bus_to_resource(), + * pcibios_resource_to_bus(), etc. + */ +static void +sn_pci_window_fixup(struct pci_dev *dev, unsigned int count, + int64_t * pci_addrs) +{ + struct pci_controller *controller = PCI_CONTROLLER(dev->bus); + unsigned int i; + unsigned int idx; + unsigned int new_count; + struct pci_window *new_window; + + if (count == 0) + return; + idx = controller->windows; + new_count = controller->windows + count; + new_window = kcalloc(new_count, sizeof(struct pci_window), GFP_KERNEL); + if (new_window == NULL) + BUG(); + if (controller->window) { + memcpy(new_window, controller->window, + sizeof(struct pci_window) * controller->windows); + kfree(controller->window); + } + + /* Setup a pci_window for each device resource. */ + for (i = 0; i <= PCI_ROM_RESOURCE; i++) { + if (pci_addrs[i] == -1) + continue; + + new_window[idx].offset = dev->resource[i].start - pci_addrs[i]; + new_window[idx].resource = dev->resource[i]; + idx++; + } + + controller->windows = new_count; + controller->window = new_window; +} + void sn_pci_unfixup_slot(struct pci_dev *dev) { struct pci_dev *host_pci_dev = SN_PCIDEV_INFO(dev)->host_pci_dev; @@ -246,21 +308,23 @@ void sn_pci_unfixup_slot(struct pci_dev *dev) */ void sn_pci_fixup_slot(struct pci_dev *dev) { + unsigned int count = 0; int idx; int segment = pci_domain_nr(dev->bus); int status = 0; struct pcibus_bussoft *bs; struct pci_bus *host_pci_bus; struct pci_dev *host_pci_dev; + struct pcidev_info *pcidev_info; + int64_t pci_addrs[PCI_ROM_RESOURCE + 1]; struct sn_irq_info *sn_irq_info; unsigned long size; unsigned int bus_no, devfn; pci_dev_get(dev); /* for the sysdata pointer */ - dev->sysdata = kmalloc(sizeof(struct pcidev_info), GFP_KERNEL); - if (SN_PCIDEV_INFO(dev) <= 0) + pcidev_info = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL); + if (pcidev_info <= 0) BUG(); /* Cannot afford to run out of memory */ - memset(SN_PCIDEV_INFO(dev), 0, sizeof(struct pcidev_info)); sn_irq_info = kmalloc(sizeof(struct sn_irq_info), GFP_KERNEL); if (sn_irq_info <= 0) @@ -270,22 +334,34 @@ void sn_pci_fixup_slot(struct pci_dev *dev) /* Call to retrieve pci device information needed by kernel. */ status = sal_get_pcidev_info((u64) segment, (u64) dev->bus->number, dev->devfn, - (u64) __pa(SN_PCIDEV_INFO(dev)), + (u64) __pa(pcidev_info), (u64) __pa(sn_irq_info)); if (status) BUG(); /* Cannot get platform pci device information */ + /* Add pcidev_info to list in sn_pci_controller struct */ + list_add_tail(&pcidev_info->pdi_list, + &(SN_PCI_CONTROLLER(dev->bus)->pcidev_info)); + /* Copy over PIO Mapped Addresses */ for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) { unsigned long start, end, addr; - if (!SN_PCIDEV_INFO(dev)->pdi_pio_mapped_addr[idx]) + if (!pcidev_info->pdi_pio_mapped_addr[idx]) { + pci_addrs[idx] = -1; continue; + } start = dev->resource[idx].start; end = dev->resource[idx].end; size = end - start; - addr = SN_PCIDEV_INFO(dev)->pdi_pio_mapped_addr[idx]; + if (size == 0) { + pci_addrs[idx] = -1; + continue; + } + pci_addrs[idx] = start; + count++; + addr = pcidev_info->pdi_pio_mapped_addr[idx]; addr = ((addr << 4) >> 4) | __IA64_UNCACHED_OFFSET; dev->resource[idx].start = addr; dev->resource[idx].end = addr + size; @@ -294,23 +370,27 @@ void sn_pci_fixup_slot(struct pci_dev *dev) else dev->resource[idx].parent = &iomem_resource; } + /* Create a pci_window in the pci_controller struct for + * each device resource. + */ + if (count > 0) + sn_pci_window_fixup(dev, count, pci_addrs); /* * Using the PROMs values for the PCI host bus, get the Linux * PCI host_pci_dev struct and set up host bus linkages */ - bus_no = (SN_PCIDEV_INFO(dev)->pdi_slot_host_handle >> 32) & 0xff; - devfn = SN_PCIDEV_INFO(dev)->pdi_slot_host_handle & 0xffffffff; + bus_no = (pcidev_info->pdi_slot_host_handle >> 32) & 0xff; + devfn = pcidev_info->pdi_slot_host_handle & 0xffffffff; host_pci_bus = pci_find_bus(segment, bus_no); host_pci_dev = pci_get_slot(host_pci_bus, devfn); - SN_PCIDEV_INFO(dev)->host_pci_dev = host_pci_dev; - SN_PCIDEV_INFO(dev)->pdi_host_pcidev_info = - SN_PCIDEV_INFO(host_pci_dev); - SN_PCIDEV_INFO(dev)->pdi_linux_pcidev = dev; + pcidev_info->host_pci_dev = host_pci_dev; + pcidev_info->pdi_linux_pcidev = dev; + pcidev_info->pdi_host_pcidev_info = SN_PCIDEV_INFO(host_pci_dev); bs = SN_PCIBUS_BUSSOFT(dev->bus); - SN_PCIDEV_INFO(dev)->pdi_pcibus_info = bs; + pcidev_info->pdi_pcibus_info = bs; if (bs && bs->bs_asic_type < PCIIO_ASIC_MAX_TYPES) { SN_PCIDEV_BUSPROVIDER(dev) = sn_pci_provider[bs->bs_asic_type]; @@ -320,11 +400,11 @@ void sn_pci_fixup_slot(struct pci_dev *dev) /* Only set up IRQ stuff if this device has a host bus context */ if (bs && sn_irq_info->irq_irq) { - SN_PCIDEV_INFO(dev)->pdi_sn_irq_info = sn_irq_info; - dev->irq = SN_PCIDEV_INFO(dev)->pdi_sn_irq_info->irq_irq; + pcidev_info->pdi_sn_irq_info = sn_irq_info; + dev->irq = pcidev_info->pdi_sn_irq_info->irq_irq; sn_irq_fixup(dev, sn_irq_info); } else { - SN_PCIDEV_INFO(dev)->pdi_sn_irq_info = NULL; + pcidev_info->pdi_sn_irq_info = NULL; kfree(sn_irq_info); } } @@ -338,6 +418,7 @@ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus) int status = 0; int nasid, cnode; struct pci_controller *controller; + struct sn_pci_controller *sn_controller; struct pcibus_bussoft *prom_bussoft_ptr; struct hubdev_info *hubdev_info; void *provider_soft = NULL; @@ -349,10 +430,15 @@ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus) return; /*bus # does not exist */ prom_bussoft_ptr = __va(prom_bussoft_ptr); - controller = kzalloc(sizeof(struct pci_controller), GFP_KERNEL); + /* Allocate a sn_pci_controller, which has a pci_controller struct + * as the first member. + */ + sn_controller = kzalloc(sizeof(struct sn_pci_controller), GFP_KERNEL); + if (!sn_controller) + BUG(); + INIT_LIST_HEAD(&sn_controller->pcidev_info); + controller = &sn_controller->pci_controller; controller->segment = segment; - if (!controller) - BUG(); if (bus == NULL) { bus = pci_scan_bus(busnum, &pci_root_ops, controller); @@ -390,6 +476,29 @@ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus) } /* + * Setup pci_windows for legacy IO and MEM space. + * (Temporary until ACPI support is in place.) + */ + controller->window = kcalloc(2, sizeof(struct pci_window), GFP_KERNEL); + if (controller->window == NULL) + BUG(); + controller->window[0].offset = prom_bussoft_ptr->bs_legacy_io; + controller->window[0].resource.name = "legacy_io"; + controller->window[0].resource.flags = IORESOURCE_IO; + controller->window[0].resource.start = prom_bussoft_ptr->bs_legacy_io; + controller->window[0].resource.end = + controller->window[0].resource.start + 0xffff; + controller->window[0].resource.parent = &ioport_resource; + controller->window[1].offset = prom_bussoft_ptr->bs_legacy_mem; + controller->window[1].resource.name = "legacy_mem"; + controller->window[1].resource.flags = IORESOURCE_MEM; + controller->window[1].resource.start = prom_bussoft_ptr->bs_legacy_mem; + controller->window[1].resource.end = + controller->window[1].resource.start + (1024 * 1024) - 1; + controller->window[1].resource.parent = &iomem_resource; + controller->windows = 2; + + /* * Generic bus fixup goes here. Don't reference prom_bussoft_ptr * after this point. */ @@ -421,7 +530,7 @@ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus) error_return: - kfree(controller); + kfree(sn_controller); return; } @@ -434,7 +543,7 @@ void sn_bus_store_sysdata(struct pci_dev *dev) dev_dbg(dev, "%s: out of memory!\n", __FUNCTION__); return; } - element->sysdata = dev->sysdata; + element->sysdata = SN_PCIDEV_INFO(dev); list_add(&element->entry, &sn_sysdata_list); } -- cgit v1.1 From acb7f67280128a9ddaa756ff10212391d28caec4 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Mon, 5 Dec 2005 13:56:50 -0600 Subject: [IA64] Limit the maximum NODEDATA_ALIGN() offset The per-node data structures are allocated with strided offsets that are a function of the node number. This prevents excessive cache-aliasing from occurring. On systems with a large number of nodes, the strided offset becomes too large. This patch restricts the maximum offset to 32MB. This is far larger than the size of any current L3 cache. Signed-off-by: Jack Steiner Signed-off-by: Tony Luck --- arch/ia64/mm/discontig.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch/ia64') diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index 0f776b0..c87d6d1 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -50,8 +50,10 @@ static nodemask_t memory_less_mask __initdata; * To prevent cache aliasing effects, align per-node structures so that they * start at addresses that are strided by node number. */ +#define MAX_NODE_ALIGN_OFFSET (32 * 1024 * 1024) #define NODEDATA_ALIGN(addr, node) \ - ((((addr) + 1024*1024-1) & ~(1024*1024-1)) + (node)*PERCPU_PAGE_SIZE) + ((((addr) + 1024*1024-1) & ~(1024*1024-1)) + \ + (((node)*PERCPU_PAGE_SIZE) & (MAX_NODE_ALIGN_OFFSET - 1))) /** * build_node_maps - callback to setup bootmem structs for each node -- cgit v1.1 From bd1d6e2451f2bb0132416fda4d129c4f57a827bc Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Mon, 5 Dec 2005 20:02:31 -0600 Subject: [IA64] Change SET_PERSONALITY to comply with comment in binfmt_elf.c. We have a customer application which trips a bug. The problem arises when a driver attempts to call do_munmap on an area which is mapped, but because current->thread.task_size has been set to 0xC0000000, the call to do_munmap fails thinking it is an unmap beyond the user's address space. The comment in fs/binfmt_elf.c in load_elf_library() before the call to SET_PERSONALITY() indicates that task_size must not be changed for the running application until flush_thread, but is for ia64 executing ia32 binaries. This patch moves the setting of task_size from SET_PERSONALITY() to flush_thread() as indicated. The customer application no longer is able to trip the bug. Signed-off-by: Robin Holt Signed-off-by: Tony Luck --- arch/ia64/ia32/binfmt_elf32.c | 2 -- arch/ia64/ia32/ia32priv.h | 1 - arch/ia64/kernel/process.c | 5 ++++- 3 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/ia64') diff --git a/arch/ia64/ia32/binfmt_elf32.c b/arch/ia64/ia32/binfmt_elf32.c index a7280d9..4e7a6a1 100644 --- a/arch/ia64/ia32/binfmt_elf32.c +++ b/arch/ia64/ia32/binfmt_elf32.c @@ -261,8 +261,6 @@ elf32_set_personality (void) { set_personality(PER_LINUX32); current->thread.map_base = IA32_PAGE_OFFSET/3; - current->thread.task_size = IA32_PAGE_OFFSET; /* use what Linux/x86 uses... */ - set_fs(USER_DS); /* set addr limit for new TASK_SIZE */ } static unsigned long diff --git a/arch/ia64/ia32/ia32priv.h b/arch/ia64/ia32/ia32priv.h index e3e9290..68ceb4e 100644 --- a/arch/ia64/ia32/ia32priv.h +++ b/arch/ia64/ia32/ia32priv.h @@ -305,7 +305,6 @@ struct old_linux32_dirent { #define ELF_DATA ELFDATA2LSB #define ELF_ARCH EM_386 -#define IA32_PAGE_OFFSET 0xc0000000 #define IA32_STACK_TOP IA32_PAGE_OFFSET #define IA32_GATE_OFFSET IA32_PAGE_OFFSET #define IA32_GATE_END IA32_PAGE_OFFSET + PAGE_SIZE diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c index 2e33665..a4da715 100644 --- a/arch/ia64/kernel/process.c +++ b/arch/ia64/kernel/process.c @@ -721,8 +721,11 @@ flush_thread (void) /* drop floating-point and debug-register state if it exists: */ current->thread.flags &= ~(IA64_THREAD_FPH_VALID | IA64_THREAD_DBG_VALID); ia64_drop_fpu(current); - if (IS_IA32_PROCESS(ia64_task_regs(current))) + if (IS_IA32_PROCESS(ia64_task_regs(current))) { ia32_drop_partial_page_list(current); + current->thread.task_size = IA32_PAGE_OFFSET; + set_fs(USER_DS); + } } /* -- cgit v1.1 From 590711b7dd731bb04e7892c0451566d788985e79 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Tue, 6 Dec 2005 08:05:24 -0600 Subject: [IA64-SGI] Fix SN PTC deadlock recovery The patch that added support for a new platform chipset (shub2) broke PTC deadlock recovery on older versions of the chipset. (PTCs are the SN platform-specific method for doing a global TLB purge). This patch fixes deadlock recovery so that it works on both the old & new chipsets. Signed-off-by: Jack Steiner Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/sn2/ptc_deadlock.S | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch/ia64') diff --git a/arch/ia64/sn/kernel/sn2/ptc_deadlock.S b/arch/ia64/sn/kernel/sn2/ptc_deadlock.S index 3fa9506..bebbcc4 100644 --- a/arch/ia64/sn/kernel/sn2/ptc_deadlock.S +++ b/arch/ia64/sn/kernel/sn2/ptc_deadlock.S @@ -39,9 +39,13 @@ sn2_ptc_deadlock_recovery_core: mov r8=r0 1: + cmp.ne p8,p9=r0,ptc1 // Test for shub type (ptc1 non-null on shub1) + // p8 = 1 if shub1, p9 = 1 if shub2 + add scr2=ALIAS_OFFSET,piowc // Address of WRITE_STATUS alias register - ;; - ld8.acq scr1=[scr2];; + mov scr1=7;; // Clear DEADLOCK, WRITE_ERROR, MULTI_WRITE_ERROR +(p8) st8.rel [scr2]=scr1;; +(p9) ld8.acq scr1=[scr2];; 5: ld8.acq scr1=[piowc];; // Wait for PIOs to complete. hint @pause -- cgit v1.1