From 4f3243117ad42b4d1faeecd452f7b24306fcfc4a Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Mon, 3 Aug 2009 04:52:03 +0000
Subject: sh: ms7724se: add 1280x720 lcdc output support

There was no big meaning in the support of SVGA,
but 720p support is necessary for ms7724se board.
So, this patch support 720p instead of SVGA.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-se/7724/setup.c | 28 ++++++++++++++++++----------
 1 file changed, 18 insertions(+), 10 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 4fb7e48..957ed17 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -39,7 +39,15 @@
  * SW41 : abxx xxxx  -> a = 0 : Analog  monitor
  *                          1 : Digital monitor
  *                      b = 0 : VGA
- *                          1 : SVGA
+ *                          1 : 720p
+ */
+
+/*
+ * about 720p
+ *
+ * When you use 1280 x 720 lcdc output,
+ * you should change OSC6 lcdc clock from 25.175MHz to 74.25MHz,
+ * and change SW41 to use 720p
  */
 
 /* Heartbeat */
@@ -546,15 +554,15 @@ static int __init devices_setup(void)
 	sh_eth_init();
 
 	if (sw & SW41_B) {
-		/* SVGA */
-		lcdc_info.ch[0].lcd_cfg.xres         = 800;
-		lcdc_info.ch[0].lcd_cfg.yres         = 600;
-		lcdc_info.ch[0].lcd_cfg.left_margin  = 142;
-		lcdc_info.ch[0].lcd_cfg.right_margin = 52;
-		lcdc_info.ch[0].lcd_cfg.hsync_len    = 96;
-		lcdc_info.ch[0].lcd_cfg.upper_margin = 24;
-		lcdc_info.ch[0].lcd_cfg.lower_margin = 2;
-		lcdc_info.ch[0].lcd_cfg.vsync_len    = 2;
+		/* 720p */
+		lcdc_info.ch[0].lcd_cfg.xres         = 1280;
+		lcdc_info.ch[0].lcd_cfg.yres         = 720;
+		lcdc_info.ch[0].lcd_cfg.left_margin  = 220;
+		lcdc_info.ch[0].lcd_cfg.right_margin = 110;
+		lcdc_info.ch[0].lcd_cfg.hsync_len    = 40;
+		lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
+		lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
+		lcdc_info.ch[0].lcd_cfg.vsync_len    = 5;
 	} else {
 		/* VGA */
 		lcdc_info.ch[0].lcd_cfg.xres         = 640;
-- 
cgit v1.1


From edc67b29425b12312356fe9a92352ce6b7307c68 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Mon, 3 Aug 2009 04:52:24 +0000
Subject: sh: Add SH7724 DMAC support.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/dma-sh.h           | 1 +
 arch/sh/include/cpu-sh4/cpu/dma-sh4a.h | 3 ++-
 2 files changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch/sh')

diff --git a/arch/sh/include/asm/dma-sh.h b/arch/sh/include/asm/dma-sh.h
index 0c8f8e1..68a5f4c 100644
--- a/arch/sh/include/asm/dma-sh.h
+++ b/arch/sh/include/asm/dma-sh.h
@@ -16,6 +16,7 @@
 
 /* DMAOR contorl: The DMAOR access size is different by CPU.*/
 #if defined(CONFIG_CPU_SUBTYPE_SH7723)	|| \
+    defined(CONFIG_CPU_SUBTYPE_SH7724)	|| \
     defined(CONFIG_CPU_SUBTYPE_SH7780)	|| \
     defined(CONFIG_CPU_SUBTYPE_SH7785)
 #define dmaor_read_reg(n) \
diff --git a/arch/sh/include/cpu-sh4/cpu/dma-sh4a.h b/arch/sh/include/cpu-sh4/cpu/dma-sh4a.h
index 0ed5178..f0886bc 100644
--- a/arch/sh/include/cpu-sh4/cpu/dma-sh4a.h
+++ b/arch/sh/include/cpu-sh4/cpu/dma-sh4a.h
@@ -16,7 +16,8 @@
 #define DMAE0_IRQ	38
 #define SH_DMAC_BASE0	0xFF608020
 #define SH_DMARS_BASE	0xFF609000
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7724)
 #define DMTE0_IRQ	48	/* DMAC0A*/
 #define DMTE4_IRQ	40	/* DMAC0B */
 #define DMTE6_IRQ	42
-- 
cgit v1.1


From 11d82905e0159c07fe2d1bfe5e7d80e4cea333ce Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 4 Aug 2009 15:54:33 +0900
Subject: sh: Fix up early printk build error.

Missing endif in the early printk case, fix it up..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/early_printk.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c
index 64f2746..81a4614 100644
--- a/arch/sh/kernel/early_printk.c
+++ b/arch/sh/kernel/early_printk.c
@@ -223,6 +223,7 @@ static int __init setup_early_printk(char *buf)
 #if defined(CONFIG_CPU_SH4) || defined(CONFIG_CPU_SH3)
 		scif_sercon_init(buf + 6);
 #endif
+#endif
 	}
 #endif
 
-- 
cgit v1.1


From c1155e34998bc07937cdf0c9db16b6902633a255 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Tue, 4 Aug 2009 16:55:29 +0200
Subject: sh: convert to asm-generic/hardirq.h

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/hardirq.h | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/include/asm/hardirq.h b/arch/sh/include/asm/hardirq.h
index 715ee23..a5be4af 100644
--- a/arch/sh/include/asm/hardirq.h
+++ b/arch/sh/include/asm/hardirq.h
@@ -1,16 +1,9 @@
 #ifndef __ASM_SH_HARDIRQ_H
 #define __ASM_SH_HARDIRQ_H
 
-#include <linux/threads.h>
-#include <linux/irq.h>
-
-/* entry.S is sensitive to the offsets of these fields */
-typedef struct {
-	unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
-
 extern void ack_bad_irq(unsigned int irq);
+#define ack_bad_irq ack_bad_irq
+
+#include <asm-generic/hardirq.h>
 
 #endif /* __ASM_SH_HARDIRQ_H */
-- 
cgit v1.1


From 9f26e659d8caf5820c51b9c695f0a313e636b99c Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Thu, 6 Aug 2009 14:51:30 +0000
Subject: sh: kfr2r09 board support - LCDC panel

This patch adds support for the WQVGA LCD display used by
the KFR2R09 board. The LCD module is a TX07D34VM0AAA made
by Hitachi, and this module is made up by a R61517 chip
together with a 240x400 pixel display. The screen is
attached to the SuperH Mobile LCDC using a 18-bit SYS bus.

The register settings used by the SYS panel setup code are
based on an out-of-tree driver which apart from duplicating
all LCDC driver code and writing to non-existing hardware
registers also never was posted for upstream merge.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-kfr2r09/Makefile        |   1 +
 arch/sh/boards/mach-kfr2r09/lcd_wqvga.c     | 332 ++++++++++++++++++++++++++++
 arch/sh/boards/mach-kfr2r09/setup.c         |  94 ++++++++
 arch/sh/include/mach-kfr2r09/mach/kfr2r09.h |  21 ++
 4 files changed, 448 insertions(+)
 create mode 100644 arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
 create mode 100644 arch/sh/include/mach-kfr2r09/mach/kfr2r09.h

(limited to 'arch/sh')

diff --git a/arch/sh/boards/mach-kfr2r09/Makefile b/arch/sh/boards/mach-kfr2r09/Makefile
index 7703756..5d58678 100644
--- a/arch/sh/boards/mach-kfr2r09/Makefile
+++ b/arch/sh/boards/mach-kfr2r09/Makefile
@@ -1 +1,2 @@
 obj-y	 := setup.o
+obj-$(CONFIG_FB_SH_MOBILE_LCDC)	+=  lcd_wqvga.o
diff --git a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
new file mode 100644
index 0000000..8ccb1cc
--- /dev/null
+++ b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
@@ -0,0 +1,332 @@
+/*
+ * KFR2R09 LCD panel support
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * Register settings based on the out-of-tree t33fb.c driver
+ * Copyright (C) 2008 Lineo Solutions, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <video/sh_mobile_lcdc.h>
+#include <mach/kfr2r09.h>
+#include <cpu/sh7724.h>
+
+/* The on-board LCD module is a Hitachi TX07D34VM0AAA. This module is made
+ * up of a 240x400 LCD hooked up to a R61517 driver IC. The driver IC is
+ * communicating with the main port of the LCDC using an 18-bit SYS interface.
+ *
+ * The device code for this LCD module is 0x01221517.
+ */
+
+static const unsigned char data_frame_if[] = {
+	0x02, /* WEMODE: 1=cont, 0=one-shot */
+	0x00, 0x00,
+	0x00, /* EPF, DFM */
+	0x02, /* RIM[1] : 1 (18bpp) */
+};
+
+static const unsigned char data_panel[] = {
+	0x0b,
+	0x63, /* 400 lines */
+	0x04, 0x00, 0x00, 0x04, 0x11, 0x00, 0x00,
+};
+
+static const unsigned char data_timing[] = {
+	0x00, 0x00, 0x13, 0x08, 0x08,
+};
+
+static const unsigned char data_timing_src[] = {
+	0x11, 0x01, 0x00, 0x01,
+};
+
+static const unsigned char data_gamma[] = {
+	0x01, 0x02, 0x08, 0x23,	0x03, 0x0c, 0x00, 0x06,	0x00, 0x00,
+	0x01, 0x00, 0x0c, 0x23, 0x03, 0x08, 0x02, 0x06, 0x00, 0x00,
+};
+
+static const unsigned char data_power[] = {
+	0x07, 0xc5, 0xdc, 0x02,	0x33, 0x0a,
+};
+
+static unsigned long read_reg(void *sohandle,
+			      struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	return so->read_data(sohandle);
+}
+
+static void write_reg(void *sohandle,
+		      struct sh_mobile_lcdc_sys_bus_ops *so,
+		      int i, unsigned long v)
+{
+	if (i)
+		so->write_data(sohandle, v); /* PTH4/LCDRS High [param, 17:0] */
+	else
+		so->write_index(sohandle, v); /* PTH4/LCDRS Low [cmd, 7:0] */
+}
+
+static void write_data(void *sohandle,
+		       struct sh_mobile_lcdc_sys_bus_ops *so,
+		       unsigned char const *data, int no_data)
+{
+	int i;
+
+	for (i = 0; i < no_data; i++)
+		write_reg(sohandle, so, 1, data[i]);
+}
+
+static unsigned long read_device_code(void *sohandle,
+				      struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	unsigned long device_code;
+
+	/* access protect OFF */
+	write_reg(sohandle, so, 0, 0xb0);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* deep standby OFF */
+	write_reg(sohandle, so, 0, 0xb1);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* device code command */
+	write_reg(sohandle, so, 0, 0xbf);
+	mdelay(50);
+
+	/* dummy read */
+	read_reg(sohandle, so);
+
+	/* read device code */
+	device_code = ((read_reg(sohandle, so) & 0xff) << 24);
+	device_code |= ((read_reg(sohandle, so) & 0xff) << 16);
+	device_code |= ((read_reg(sohandle, so) & 0xff) << 8);
+	device_code |= (read_reg(sohandle, so) & 0xff);
+
+	return device_code;
+}
+
+static void write_memory_start(void *sohandle,
+			       struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	write_reg(sohandle, so, 0, 0x2c);
+}
+
+static void clear_memory(void *sohandle,
+			 struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	int i;
+
+	/* write start */
+	write_memory_start(sohandle, so);
+
+	/* paint it black */
+	for (i = 0; i < (240 * 400); i++)
+		write_reg(sohandle, so, 1, 0x00);
+}
+
+static void display_on(void *sohandle,
+		       struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	/* access protect off */
+	write_reg(sohandle, so, 0, 0xb0);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* exit deep standby mode */
+	write_reg(sohandle, so, 0, 0xb1);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* frame memory I/F */
+	write_reg(sohandle, so, 0, 0xb3);
+	write_data(sohandle, so, data_frame_if, ARRAY_SIZE(data_frame_if));
+
+	/* display mode and frame memory write mode */
+	write_reg(sohandle, so, 0, 0xb4);
+	write_reg(sohandle, so, 1, 0x00); /* DBI, internal clock */
+
+	/* panel */
+	write_reg(sohandle, so, 0, 0xc0);
+	write_data(sohandle, so, data_panel, ARRAY_SIZE(data_panel));
+
+	/* timing (normal) */
+	write_reg(sohandle, so, 0, 0xc1);
+	write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
+
+	/* timing (partial) */
+	write_reg(sohandle, so, 0, 0xc2);
+	write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
+
+	/* timing (idle) */
+	write_reg(sohandle, so, 0, 0xc3);
+	write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
+
+	/* timing (source/VCOM/gate driving) */
+	write_reg(sohandle, so, 0, 0xc4);
+	write_data(sohandle, so, data_timing_src, ARRAY_SIZE(data_timing_src));
+
+	/* gamma (red) */
+	write_reg(sohandle, so, 0, 0xc8);
+	write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
+
+	/* gamma (green) */
+	write_reg(sohandle, so, 0, 0xc9);
+	write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
+
+	/* gamma (blue) */
+	write_reg(sohandle, so, 0, 0xca);
+	write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
+
+	/* power (common) */
+	write_reg(sohandle, so, 0, 0xd0);
+	write_data(sohandle, so, data_power, ARRAY_SIZE(data_power));
+
+	/* VCOM */
+	write_reg(sohandle, so, 0, 0xd1);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x0f);
+	write_reg(sohandle, so, 1, 0x02);
+
+	/* power (normal) */
+	write_reg(sohandle, so, 0, 0xd2);
+	write_reg(sohandle, so, 1, 0x63);
+	write_reg(sohandle, so, 1, 0x24);
+
+	/* power (partial) */
+	write_reg(sohandle, so, 0, 0xd3);
+	write_reg(sohandle, so, 1, 0x63);
+	write_reg(sohandle, so, 1, 0x24);
+
+	/* power (idle) */
+	write_reg(sohandle, so, 0, 0xd4);
+	write_reg(sohandle, so, 1, 0x63);
+	write_reg(sohandle, so, 1, 0x24);
+
+	write_reg(sohandle, so, 0, 0xd8);
+	write_reg(sohandle, so, 1, 0x77);
+	write_reg(sohandle, so, 1, 0x77);
+
+	/* TE signal */
+	write_reg(sohandle, so, 0, 0x35);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* TE signal line */
+	write_reg(sohandle, so, 0, 0x44);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* column address */
+	write_reg(sohandle, so, 0, 0x2a);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0xef);
+
+	/* page address */
+	write_reg(sohandle, so, 0, 0x2b);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x01);
+	write_reg(sohandle, so, 1, 0x8f);
+
+	/* exit sleep mode */
+	write_reg(sohandle, so, 0, 0x11);
+
+	mdelay(120);
+
+	/* clear vram */
+	clear_memory(sohandle, so);
+
+	/* display ON */
+	write_reg(sohandle, so, 0, 0x29);
+	mdelay(1);
+
+	write_memory_start(sohandle, so);
+}
+
+int kfr2r09_lcd_setup(void *board_data, void *sohandle,
+		      struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	/* power on */
+	gpio_set_value(GPIO_PTF4, 0);  /* PROTECT/ -> L */
+	gpio_set_value(GPIO_PTE4, 0);  /* LCD_RST/ -> L */
+	gpio_set_value(GPIO_PTF4, 1);  /* PROTECT/ -> H */
+	udelay(1100);
+	gpio_set_value(GPIO_PTE4, 1);  /* LCD_RST/ -> H */
+	udelay(10);
+	gpio_set_value(GPIO_PTF4, 0);  /* PROTECT/ -> L */
+	mdelay(20);
+
+	if (read_device_code(sohandle, so) != 0x01221517)
+		return -ENODEV;
+
+	pr_info("KFR2R09 WQVGA LCD Module detected.\n");
+
+	display_on(sohandle, so);
+	return 0;
+}
+
+#define CTRL_CKSW       0x10
+#define CTRL_C10        0x20
+#define CTRL_CPSW       0x80
+#define MAIN_MLED4      0x40
+#define MAIN_MSW        0x80
+
+static int kfr2r09_lcd_backlight(int on)
+{
+	struct i2c_adapter *a;
+	struct i2c_msg msg;
+	unsigned char buf[2];
+	int ret;
+
+	a = i2c_get_adapter(0);
+	if (!a)
+		return -ENODEV;
+
+	buf[0] = 0x00;
+	if (on)
+		buf[1] = CTRL_CPSW | CTRL_C10 | CTRL_CKSW;
+	else
+		buf[1] = 0;
+
+	msg.addr = 0x75;
+	msg.buf = buf;
+	msg.len = 2;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	buf[0] = 0x01;
+	if (on)
+		buf[1] = MAIN_MSW | MAIN_MLED4 | 0x0c;
+	else
+		buf[1] = 0;
+
+	msg.addr = 0x75;
+	msg.buf = buf;
+	msg.len = 2;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	return 0;
+}
+
+void kfr2r09_lcd_on(void *board_data)
+{
+	kfr2r09_lcd_backlight(1);
+}
+
+void kfr2r09_lcd_off(void *board_data)
+{
+	kfr2r09_lcd_backlight(0);
+}
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index bf5f8f8..1355080 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -15,11 +15,13 @@
 #include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/input.h>
+#include <video/sh_mobile_lcdc.h>
 #include <asm/clock.h>
 #include <asm/machvec.h>
 #include <asm/io.h>
 #include <asm/sh_keysc.h>
 #include <cpu/sh7724.h>
+#include <mach/kfr2r09.h>
 
 static struct mtd_partition kfr2r09_nor_flash_partitions[] =
 {
@@ -97,9 +99,70 @@ static struct platform_device kfr2r09_sh_keysc_device = {
 	},
 };
 
+static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
+	.clock_source = LCDC_CLK_BUS,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.interface_type = SYS18,
+		.clock_divider = 6,
+		.flags = LCDC_FLAGS_DWPOL,
+		.lcd_cfg = {
+			.name = "TX07D34VM0AAA",
+			.xres = 240,
+			.yres = 400,
+			.left_margin = 0,
+			.right_margin = 16,
+			.hsync_len = 8,
+			.upper_margin = 0,
+			.lower_margin = 1,
+			.vsync_len = 1,
+			.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		},
+		.lcd_size_cfg = {
+			.width = 35,
+			.height = 58,
+		},
+		.board_cfg = {
+			.setup_sys = kfr2r09_lcd_setup,
+			.display_on = kfr2r09_lcd_on,
+			.display_off = kfr2r09_lcd_off,
+		},
+		.sys_bus_cfg = {
+			.ldmt2r = 0x07010904,
+			.ldmt3r = 0x14012914,
+			/* set 1s delay to encourage fsync() */
+			.deferred_io_msec = 1000,
+		},
+	}
+};
+
+static struct resource kfr2r09_sh_lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000, /* P4-only space */
+		.end	= 0xfe941fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 106,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kfr2r09_sh_lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(kfr2r09_sh_lcdc_resources),
+	.resource	= kfr2r09_sh_lcdc_resources,
+	.dev	= {
+		.platform_data	= &kfr2r09_sh_lcdc_info,
+	},
+};
+
 static struct platform_device *kfr2r09_devices[] __initdata = {
 	&kfr2r09_nor_flash_device,
 	&kfr2r09_sh_keysc_device,
+	&kfr2r09_sh_lcdc_device,
 };
 
 #define BSC_CS0BCR 0xfec10004
@@ -128,6 +191,37 @@ static int __init kfr2r09_devices_setup(void)
 	gpio_request(GPIO_FN_KEYIN4, NULL);
 	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
 
+	/* setup LCDC pins for SYS panel */
+	gpio_request(GPIO_FN_LCDD17, NULL);
+	gpio_request(GPIO_FN_LCDD16, NULL);
+	gpio_request(GPIO_FN_LCDD15, NULL);
+	gpio_request(GPIO_FN_LCDD14, NULL);
+	gpio_request(GPIO_FN_LCDD13, NULL);
+	gpio_request(GPIO_FN_LCDD12, NULL);
+	gpio_request(GPIO_FN_LCDD11, NULL);
+	gpio_request(GPIO_FN_LCDD10, NULL);
+	gpio_request(GPIO_FN_LCDD9, NULL);
+	gpio_request(GPIO_FN_LCDD8, NULL);
+	gpio_request(GPIO_FN_LCDD7, NULL);
+	gpio_request(GPIO_FN_LCDD6, NULL);
+	gpio_request(GPIO_FN_LCDD5, NULL);
+	gpio_request(GPIO_FN_LCDD4, NULL);
+	gpio_request(GPIO_FN_LCDD3, NULL);
+	gpio_request(GPIO_FN_LCDD2, NULL);
+	gpio_request(GPIO_FN_LCDD1, NULL);
+	gpio_request(GPIO_FN_LCDD0, NULL);
+	gpio_request(GPIO_FN_LCDRS, NULL); /* LCD_RS */
+	gpio_request(GPIO_FN_LCDCS, NULL); /* LCD_CS/ */
+	gpio_request(GPIO_FN_LCDRD, NULL); /* LCD_RD/ */
+	gpio_request(GPIO_FN_LCDWR, NULL); /* LCD_WR/ */
+	gpio_request(GPIO_FN_LCDVSYN, NULL); /* LCD_VSYNC */
+	gpio_request(GPIO_PTE4, NULL); /* LCD_RST/ */
+	gpio_direction_output(GPIO_PTE4, 1);
+	gpio_request(GPIO_PTF4, NULL); /* PROTECT/ */
+	gpio_direction_output(GPIO_PTF4, 1);
+	gpio_request(GPIO_PTU0, NULL); /* LEDSTDBY/ */
+	gpio_direction_output(GPIO_PTU0, 1);
+
 	return platform_add_devices(kfr2r09_devices,
 				    ARRAY_SIZE(kfr2r09_devices));
 }
diff --git a/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h b/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h
new file mode 100644
index 0000000..174374e
--- /dev/null
+++ b/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_SH_KFR2R09_H
+#define __ASM_SH_KFR2R09_H
+
+#include <video/sh_mobile_lcdc.h>
+
+#ifdef CONFIG_FB_SH_MOBILE_LCDC
+void kfr2r09_lcd_on(void *board_data);
+void kfr2r09_lcd_off(void *board_data);
+int kfr2r09_lcd_setup(void *board_data, void *sys_ops_handle,
+		      struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
+#else
+static inline void kfr2r09_lcd_on(void *board_data) {}
+static inline void kfr2r09_lcd_off(void *board_data) {}
+static inline int kfr2r09_lcd_setup(void *board_data, void *sys_ops_handle,
+				    struct sh_mobile_lcdc_sys_bus_ops *sys_ops)
+{
+	return -ENODEV;
+}
+#endif
+
+#endif /* __ASM_SH_KFR2R09_H */
-- 
cgit v1.1


From 33893d7aa00057d067527e0d8c210190efade8f1 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Thu, 6 Aug 2009 14:58:43 +0000
Subject: sh: kfr2r09 board support - NAND flash

This patch adds support for the NAND flash chip
attached to CS4 on the KFR2R09 board. The device is
driven by the platform device driver "onenand-flash".

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-kfr2r09/setup.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

(limited to 'arch/sh')

diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 1355080..bdb10c2 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -11,6 +11,7 @@
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/mtd/physmap.h>
+#include <linux/mtd/onenand.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
@@ -62,6 +63,21 @@ static struct platform_device kfr2r09_nor_flash_device = {
 	},
 };
 
+static struct resource kfr2r09_nand_flash_resources[] = {
+	[0] = {
+		.name		= "NAND Flash",
+		.start		= 0x10000000,
+		.end		= 0x1001ffff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device kfr2r09_nand_flash_device = {
+	.name		= "onenand-flash",
+	.resource	= kfr2r09_nand_flash_resources,
+	.num_resources	= ARRAY_SIZE(kfr2r09_nand_flash_resources),
+};
+
 static struct sh_keysc_info kfr2r09_sh_keysc_info = {
 	.mode = SH_KEYSC_MODE_1, /* KEYOUT0->4, KEYIN0->4 */
 	.scan_timing = 3,
@@ -161,12 +177,15 @@ static struct platform_device kfr2r09_sh_lcdc_device = {
 
 static struct platform_device *kfr2r09_devices[] __initdata = {
 	&kfr2r09_nor_flash_device,
+	&kfr2r09_nand_flash_device,
 	&kfr2r09_sh_keysc_device,
 	&kfr2r09_sh_lcdc_device,
 };
 
 #define BSC_CS0BCR 0xfec10004
 #define BSC_CS0WCR 0xfec10024
+#define BSC_CS4BCR 0xfec10010
+#define BSC_CS4WCR 0xfec10030
 
 static int __init kfr2r09_devices_setup(void)
 {
@@ -178,6 +197,10 @@ static int __init kfr2r09_devices_setup(void)
 	ctrl_outl(0x36db0400, BSC_CS0BCR);
 	ctrl_outl(0x00000500, BSC_CS0WCR);
 
+	/* setup NAND flash at CS4 */
+	ctrl_outl(0x36db0400, BSC_CS4BCR);
+	ctrl_outl(0x00000500, BSC_CS4WCR);
+
 	/* setup KEYSC pins */
 	gpio_request(GPIO_FN_KEYOUT0, NULL);
 	gpio_request(GPIO_FN_KEYOUT1, NULL);
-- 
cgit v1.1


From 7766e16beec3363516306754c9c51a85747d734d Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Thu, 6 Aug 2009 15:03:43 +0000
Subject: sh: LED9, LED10 and LED11 support for Solution Engine 7724

This patch adds support for LED9, LED10 and LED11 on
the Solution Engine 7724 board. If CONFIG_PM is enabled
then these LEDs are used to show the hardware sleep
mode used by the processor. Useful to debug cpuidle.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-se/7724/setup.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

(limited to 'arch/sh')

diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 957ed17..36a4ca3 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -429,6 +429,32 @@ static int __init devices_setup(void)
 	/* turn on USB clocks, use external clock */
 	ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
 
+#ifdef CONFIG_PM
+	/* Let LED9 show STATUS2 */
+	gpio_request(GPIO_FN_STATUS2, NULL);
+
+	/* Lit LED10 show STATUS0 */
+	gpio_request(GPIO_FN_STATUS0, NULL);
+
+	/* Lit LED11 show PDSTATUS */
+	gpio_request(GPIO_FN_PDSTATUS, NULL);
+#else
+	/* Lit LED9 */
+	gpio_request(GPIO_PTJ6, NULL);
+	gpio_direction_output(GPIO_PTJ6, 1);
+	gpio_export(GPIO_PTJ6, 0);
+
+	/* Lit LED10 */
+	gpio_request(GPIO_PTJ5, NULL);
+	gpio_direction_output(GPIO_PTJ5, 1);
+	gpio_export(GPIO_PTJ5, 0);
+
+	/* Lit LED11 */
+	gpio_request(GPIO_PTJ7, NULL);
+	gpio_direction_output(GPIO_PTJ7, 1);
+	gpio_export(GPIO_PTJ7, 0);
+#endif
+
 	/* enable USB0 port */
 	ctrl_outw(0x0600, 0xa40501d4);
 
-- 
cgit v1.1


From 2d2bcd319a3d1412999cdfc72ad64eec992dc37e Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 7 Aug 2009 03:58:38 +0900
Subject: sh: fix romImage mach dir usage

This patch moves all the romImage related header files into
the mach/ directory.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boot/romimage/head.S                       |   2 +-
 arch/sh/include/mach-common/mach/romimage.h        |   1 +
 arch/sh/include/mach-common/romimage.h             |   1 -
 .../mach-kfr2r09/mach/partner-jet-setup.txt        | 134 +++++++++++++++++++++
 arch/sh/include/mach-kfr2r09/mach/romimage.h       |  75 ++++++++++++
 arch/sh/include/mach-kfr2r09/partner-jet-setup.txt | 134 ---------------------
 arch/sh/include/mach-kfr2r09/romimage.h            |  75 ------------
 7 files changed, 211 insertions(+), 211 deletions(-)
 create mode 100644 arch/sh/include/mach-common/mach/romimage.h
 delete mode 100644 arch/sh/include/mach-common/romimage.h
 create mode 100644 arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt
 create mode 100644 arch/sh/include/mach-kfr2r09/mach/romimage.h
 delete mode 100644 arch/sh/include/mach-kfr2r09/partner-jet-setup.txt
 delete mode 100644 arch/sh/include/mach-kfr2r09/romimage.h

(limited to 'arch/sh')

diff --git a/arch/sh/boot/romimage/head.S b/arch/sh/boot/romimage/head.S
index 97a087b..219bc62 100644
--- a/arch/sh/boot/romimage/head.S
+++ b/arch/sh/boot/romimage/head.S
@@ -7,4 +7,4 @@
 .text
 	.global	romstart
 romstart:
-#include <romimage.h>
+#include <mach/romimage.h>
diff --git a/arch/sh/include/mach-common/mach/romimage.h b/arch/sh/include/mach-common/mach/romimage.h
new file mode 100644
index 0000000..267e241
--- /dev/null
+++ b/arch/sh/include/mach-common/mach/romimage.h
@@ -0,0 +1 @@
+/* do nothing here by default */
diff --git a/arch/sh/include/mach-common/romimage.h b/arch/sh/include/mach-common/romimage.h
deleted file mode 100644
index 267e241..0000000
--- a/arch/sh/include/mach-common/romimage.h
+++ /dev/null
@@ -1 +0,0 @@
-/* do nothing here by default */
diff --git a/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt b/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt
new file mode 100644
index 0000000..9c85088
--- /dev/null
+++ b/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt
@@ -0,0 +1,134 @@
+LIST "partner-jet-setup.txt - 20090729 Magnus Damm"
+LIST "set up enough of the kfr2r09 hardware to boot the kernel"
+
+LIST "zImage (RAM boot)"
+LIST "This script can be used to boot the kernel from RAM via JTAG:"
+LIST "> < partner-jet-setup.txt"
+LIST "> RD zImage, 0xa8800000"
+LIST "> G=0xa8800000"
+
+LIST "romImage (Flash boot)"
+LIST "Use the following command to burn the zImage to flash via JTAG:"
+LIST "> RD romImage, 0"
+
+LIST "--------------------------------"
+
+LIST "disable watchdog"
+EW 0xa4520004, 0xa507
+
+LIST "select mode for cs5 + cs6"
+ED 0xff800020, 0xa5a50001
+ED 0xfec10000, 0x0000001b
+
+LIST "setup clocks"
+ED 0xa4150004, 0x00000050
+ED 0xa4150000, 0x91053508
+WAIT 1
+ED 0xa4150024, 0x00005000
+
+LIST "setup pins"
+EB 0xa4050120, 0x00
+EB 0xa4050122, 0x00
+EB 0xa4050124, 0x00
+EB 0xa4050126, 0x00
+EB 0xa4050128, 0xA0
+EB 0xa405012A, 0x10
+EB 0xa405012C, 0x00
+EB 0xa405012E, 0x00
+EB 0xa4050130, 0x00
+EB 0xa4050132, 0x00
+EB 0xa4050134, 0x01
+EB 0xa4050136, 0x40
+EB 0xa4050138, 0x00
+EB 0xa405013A, 0x00
+EB 0xa405013C, 0x00
+EB 0xa405013E, 0x20
+EB 0xa4050160, 0x00
+EB 0xa4050162, 0x40
+EB 0xa4050164, 0x03
+EB 0xa4050166, 0x00
+EB 0xa4050168, 0x00
+EB 0xa405016A, 0x00
+EB 0xa405016C, 0x00
+
+EW 0xa405014E, 0x5660
+EW 0xa4050150, 0x0145
+EW 0xa4050152, 0x1550
+EW 0xa4050154, 0x0200
+EW 0xa4050156, 0x0040
+
+EW 0xa4050158, 0x0000
+EW 0xa405015a, 0x0000
+EW 0xa405015c, 0x0000
+EW 0xa405015e, 0x0000
+
+EW 0xa4050180, 0x0000
+EW 0xa4050182, 0x8002
+EW 0xa4050184, 0x0000
+
+EW 0xa405018a, 0x9991
+EW 0xa405018c, 0x8011
+EW 0xa405018e, 0x9550
+
+EW 0xa4050100, 0x0000
+EW 0xa4050102, 0x5540
+EW 0xa4050104, 0x0000
+EW 0xa4050106, 0x0000
+EW 0xa4050108, 0x4550
+EW 0xa405010a, 0x0130
+EW 0xa405010c, 0x0555
+EW 0xa405010e, 0x0000
+EW 0xa4050110, 0x0000
+EW 0xa4050112, 0xAAA8
+EW 0xa4050114, 0x8305
+EW 0xa4050116, 0x10F0
+EW 0xa4050118, 0x0F50
+EW 0xa405011a, 0x0000
+EW 0xa405011c, 0x0000
+EW 0xa405011e, 0x0555
+EW 0xa4050140, 0x0000
+EW 0xa4050142, 0x5141
+EW 0xa4050144, 0x5005
+EW 0xa4050146, 0xAAA9
+EW 0xa4050148, 0xFAA9
+EW 0xa405014a, 0x3000
+EW 0xa405014c, 0x0000
+
+LIST "setup sdram"
+ED 0xFD000108, 0x40000301
+ED 0xFD000020, 0x011B0002
+ED 0xFD000030, 0x03060E02
+ED 0xFD000034, 0x01020102
+ED 0xFD000038, 0x01090406
+ED 0xFD000008, 0x00000004
+ED 0xFD000040, 0x00000001
+ED 0xFD000040, 0x00000000
+ED 0xFD000018, 0x00000001
+
+WAIT 1
+
+ED 0xFD000014, 0x00000002
+ED 0xFD000060, 0x00000032
+ED 0xFD000060, 0x00020000
+ED 0xFD000014, 0x00000004
+ED 0xFD000014, 0x00000004
+ED 0xFD000010, 0x00000001
+ED 0xFD000044, 0x000004AF
+ED 0xFD000048, 0x20CF0037
+
+LIST "read 16 bytes from sdram"
+DD 0xa8000000, 0xa8000000, 1
+DD 0xa8000004, 0xa8000004, 1
+DD 0xa8000008, 0xa8000008, 1
+DD 0xa800000c, 0xa800000c, 1
+
+ED 0xFD000014, 0x00000002
+ED 0xFD000014, 0x00000004
+ED 0xFD000108, 0x40000300
+ED 0xFD000040, 0x00010000
+
+LIST "write to internal ram"
+ED 0xfd8007fc, 0
+
+LIST "setup cache"
+ED 0xff00001c, 0x0000090b
diff --git a/arch/sh/include/mach-kfr2r09/mach/romimage.h b/arch/sh/include/mach-kfr2r09/mach/romimage.h
new file mode 100644
index 0000000..f5aa8e1
--- /dev/null
+++ b/arch/sh/include/mach-kfr2r09/mach/romimage.h
@@ -0,0 +1,75 @@
+/* kfr2r09 board specific boot code:
+ * converts the "partner-jet-script.txt" script into assembly
+ * the assembly code is the first code to be executed in the romImage
+ */
+
+/* The LIST command is used to include comments in the script */
+.macro	LIST comment
+.endm
+
+/* The ED command is used to write a 32-bit word */
+.macro  ED, addr, data
+        mov.l 1f ,r1
+        mov.l 2f ,r0
+        mov.l r0, @r1
+	bra 3f
+	 nop
+	.align 2
+1:	.long \addr
+2:	.long \data
+3:
+.endm
+
+/* The EW command is used to write a 16-bit word */
+.macro  EW, addr, data
+        mov.l 1f ,r1
+        mov.l 2f ,r0
+        mov.w r0, @r1
+	bra 3f
+	 nop
+	.align 2
+1:	.long \addr
+2:	.long \data
+3:
+.endm
+
+/* The EB command is used to write an 8-bit word */
+.macro  EB, addr, data
+        mov.l 1f ,r1
+        mov.l 2f ,r0
+        mov.b r0, @r1
+	bra 3f
+	 nop
+	.align 2
+1:	.long \addr
+2:	.long \data
+3:
+.endm
+
+/* The WAIT command is used to delay the execution */
+.macro  WAIT, time
+        mov.l  2f ,r3
+1:
+        nop
+        tst     r3, r3
+        bf/s    1b
+         dt      r3
+	bra	3f
+	 nop
+	.align 2
+2:	.long \time * 100
+3:
+.endm
+
+/* The DD command is used to read a 32-bit word */
+.macro  DD, addr, addr2, nr
+        mov.l 1f ,r1
+        mov.l @r1, r0
+	bra 2f
+	 nop
+	.align 2
+1:	.long \addr
+2:
+.endm
+
+#include "partner-jet-setup.txt"
diff --git a/arch/sh/include/mach-kfr2r09/partner-jet-setup.txt b/arch/sh/include/mach-kfr2r09/partner-jet-setup.txt
deleted file mode 100644
index 9c85088..0000000
--- a/arch/sh/include/mach-kfr2r09/partner-jet-setup.txt
+++ /dev/null
@@ -1,134 +0,0 @@
-LIST "partner-jet-setup.txt - 20090729 Magnus Damm"
-LIST "set up enough of the kfr2r09 hardware to boot the kernel"
-
-LIST "zImage (RAM boot)"
-LIST "This script can be used to boot the kernel from RAM via JTAG:"
-LIST "> < partner-jet-setup.txt"
-LIST "> RD zImage, 0xa8800000"
-LIST "> G=0xa8800000"
-
-LIST "romImage (Flash boot)"
-LIST "Use the following command to burn the zImage to flash via JTAG:"
-LIST "> RD romImage, 0"
-
-LIST "--------------------------------"
-
-LIST "disable watchdog"
-EW 0xa4520004, 0xa507
-
-LIST "select mode for cs5 + cs6"
-ED 0xff800020, 0xa5a50001
-ED 0xfec10000, 0x0000001b
-
-LIST "setup clocks"
-ED 0xa4150004, 0x00000050
-ED 0xa4150000, 0x91053508
-WAIT 1
-ED 0xa4150024, 0x00005000
-
-LIST "setup pins"
-EB 0xa4050120, 0x00
-EB 0xa4050122, 0x00
-EB 0xa4050124, 0x00
-EB 0xa4050126, 0x00
-EB 0xa4050128, 0xA0
-EB 0xa405012A, 0x10
-EB 0xa405012C, 0x00
-EB 0xa405012E, 0x00
-EB 0xa4050130, 0x00
-EB 0xa4050132, 0x00
-EB 0xa4050134, 0x01
-EB 0xa4050136, 0x40
-EB 0xa4050138, 0x00
-EB 0xa405013A, 0x00
-EB 0xa405013C, 0x00
-EB 0xa405013E, 0x20
-EB 0xa4050160, 0x00
-EB 0xa4050162, 0x40
-EB 0xa4050164, 0x03
-EB 0xa4050166, 0x00
-EB 0xa4050168, 0x00
-EB 0xa405016A, 0x00
-EB 0xa405016C, 0x00
-
-EW 0xa405014E, 0x5660
-EW 0xa4050150, 0x0145
-EW 0xa4050152, 0x1550
-EW 0xa4050154, 0x0200
-EW 0xa4050156, 0x0040
-
-EW 0xa4050158, 0x0000
-EW 0xa405015a, 0x0000
-EW 0xa405015c, 0x0000
-EW 0xa405015e, 0x0000
-
-EW 0xa4050180, 0x0000
-EW 0xa4050182, 0x8002
-EW 0xa4050184, 0x0000
-
-EW 0xa405018a, 0x9991
-EW 0xa405018c, 0x8011
-EW 0xa405018e, 0x9550
-
-EW 0xa4050100, 0x0000
-EW 0xa4050102, 0x5540
-EW 0xa4050104, 0x0000
-EW 0xa4050106, 0x0000
-EW 0xa4050108, 0x4550
-EW 0xa405010a, 0x0130
-EW 0xa405010c, 0x0555
-EW 0xa405010e, 0x0000
-EW 0xa4050110, 0x0000
-EW 0xa4050112, 0xAAA8
-EW 0xa4050114, 0x8305
-EW 0xa4050116, 0x10F0
-EW 0xa4050118, 0x0F50
-EW 0xa405011a, 0x0000
-EW 0xa405011c, 0x0000
-EW 0xa405011e, 0x0555
-EW 0xa4050140, 0x0000
-EW 0xa4050142, 0x5141
-EW 0xa4050144, 0x5005
-EW 0xa4050146, 0xAAA9
-EW 0xa4050148, 0xFAA9
-EW 0xa405014a, 0x3000
-EW 0xa405014c, 0x0000
-
-LIST "setup sdram"
-ED 0xFD000108, 0x40000301
-ED 0xFD000020, 0x011B0002
-ED 0xFD000030, 0x03060E02
-ED 0xFD000034, 0x01020102
-ED 0xFD000038, 0x01090406
-ED 0xFD000008, 0x00000004
-ED 0xFD000040, 0x00000001
-ED 0xFD000040, 0x00000000
-ED 0xFD000018, 0x00000001
-
-WAIT 1
-
-ED 0xFD000014, 0x00000002
-ED 0xFD000060, 0x00000032
-ED 0xFD000060, 0x00020000
-ED 0xFD000014, 0x00000004
-ED 0xFD000014, 0x00000004
-ED 0xFD000010, 0x00000001
-ED 0xFD000044, 0x000004AF
-ED 0xFD000048, 0x20CF0037
-
-LIST "read 16 bytes from sdram"
-DD 0xa8000000, 0xa8000000, 1
-DD 0xa8000004, 0xa8000004, 1
-DD 0xa8000008, 0xa8000008, 1
-DD 0xa800000c, 0xa800000c, 1
-
-ED 0xFD000014, 0x00000002
-ED 0xFD000014, 0x00000004
-ED 0xFD000108, 0x40000300
-ED 0xFD000040, 0x00010000
-
-LIST "write to internal ram"
-ED 0xfd8007fc, 0
-
-LIST "setup cache"
-ED 0xff00001c, 0x0000090b
diff --git a/arch/sh/include/mach-kfr2r09/romimage.h b/arch/sh/include/mach-kfr2r09/romimage.h
deleted file mode 100644
index f5aa8e1..0000000
--- a/arch/sh/include/mach-kfr2r09/romimage.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/* kfr2r09 board specific boot code:
- * converts the "partner-jet-script.txt" script into assembly
- * the assembly code is the first code to be executed in the romImage
- */
-
-/* The LIST command is used to include comments in the script */
-.macro	LIST comment
-.endm
-
-/* The ED command is used to write a 32-bit word */
-.macro  ED, addr, data
-        mov.l 1f ,r1
-        mov.l 2f ,r0
-        mov.l r0, @r1
-	bra 3f
-	 nop
-	.align 2
-1:	.long \addr
-2:	.long \data
-3:
-.endm
-
-/* The EW command is used to write a 16-bit word */
-.macro  EW, addr, data
-        mov.l 1f ,r1
-        mov.l 2f ,r0
-        mov.w r0, @r1
-	bra 3f
-	 nop
-	.align 2
-1:	.long \addr
-2:	.long \data
-3:
-.endm
-
-/* The EB command is used to write an 8-bit word */
-.macro  EB, addr, data
-        mov.l 1f ,r1
-        mov.l 2f ,r0
-        mov.b r0, @r1
-	bra 3f
-	 nop
-	.align 2
-1:	.long \addr
-2:	.long \data
-3:
-.endm
-
-/* The WAIT command is used to delay the execution */
-.macro  WAIT, time
-        mov.l  2f ,r3
-1:
-        nop
-        tst     r3, r3
-        bf/s    1b
-         dt      r3
-	bra	3f
-	 nop
-	.align 2
-2:	.long \time * 100
-3:
-.endm
-
-/* The DD command is used to read a 32-bit word */
-.macro  DD, addr, addr2, nr
-        mov.l 1f ,r1
-        mov.l @r1, r0
-	bra 2f
-	 nop
-	.align 2
-1:	.long \addr
-2:
-.endm
-
-#include "partner-jet-setup.txt"
-- 
cgit v1.1


From b4a757367d36cebddcd332a4024d92f1e87af370 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Thu, 6 Aug 2009 15:16:29 +0000
Subject: sh: clean up Migo-R header file

This patch moves the Migo-R specific header file from
mach-common/ into mach-migor/ and removes unused cruft.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/mach-common/mach/migor.h | 64 --------------------------------
 arch/sh/include/mach-migor/mach/migor.h  | 14 +++++++
 2 files changed, 14 insertions(+), 64 deletions(-)
 delete mode 100644 arch/sh/include/mach-common/mach/migor.h
 create mode 100644 arch/sh/include/mach-migor/mach/migor.h

(limited to 'arch/sh')

diff --git a/arch/sh/include/mach-common/mach/migor.h b/arch/sh/include/mach-common/mach/migor.h
deleted file mode 100644
index e451f02..0000000
--- a/arch/sh/include/mach-common/mach/migor.h
+++ /dev/null
@@ -1,64 +0,0 @@
-#ifndef __ASM_SH_MIGOR_H
-#define __ASM_SH_MIGOR_H
-
-/*
- * linux/include/asm-sh/migor.h
- *
- * Copyright (C) 2008 Renesas Solutions
- *
- * Portions Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#include <asm/addrspace.h>
-
-/* GPIO */
-#define PORT_PACR 0xa4050100
-#define PORT_PDCR 0xa4050106
-#define PORT_PECR 0xa4050108
-#define PORT_PHCR 0xa405010e
-#define PORT_PJCR 0xa4050110
-#define PORT_PKCR 0xa4050112
-#define PORT_PLCR 0xa4050114
-#define PORT_PMCR 0xa4050116
-#define PORT_PRCR 0xa405011c
-#define PORT_PTCR 0xa4050140
-#define PORT_PUCR 0xa4050142
-#define PORT_PVCR 0xa4050144
-#define PORT_PWCR 0xa4050146
-#define PORT_PXCR 0xa4050148
-#define PORT_PYCR 0xa405014a
-#define PORT_PZCR 0xa405014c
-#define PORT_PADR 0xa4050120
-#define PORT_PHDR 0xa405012e
-#define PORT_PTDR 0xa4050160
-#define PORT_PWDR 0xa4050166
-
-#define PORT_HIZCRA 0xa4050158
-#define PORT_HIZCRC 0xa405015c
-
-#define PORT_MSELCRB 0xa4050182
-
-#define PORT_PSELA 0xa405014e
-#define PORT_PSELB 0xa4050150
-#define PORT_PSELC 0xa4050152
-#define PORT_PSELD 0xa4050154
-#define PORT_PSELE 0xa4050156
-
-#define PORT_HIZCRA 0xa4050158
-#define PORT_HIZCRB 0xa405015a
-#define PORT_HIZCRC 0xa405015c
-
-#define BSC_CS4BCR 0xfec10010
-#define BSC_CS6ABCR 0xfec1001c
-#define BSC_CS4WCR 0xfec10030
-
-#include <video/sh_mobile_lcdc.h>
-
-int migor_lcd_qvga_setup(void *board_data, void *sys_ops_handle,
-			 struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
-
-#endif /* __ASM_SH_MIGOR_H */
diff --git a/arch/sh/include/mach-migor/mach/migor.h b/arch/sh/include/mach-migor/mach/migor.h
new file mode 100644
index 0000000..cee6cb8
--- /dev/null
+++ b/arch/sh/include/mach-migor/mach/migor.h
@@ -0,0 +1,14 @@
+#ifndef __ASM_SH_MIGOR_H
+#define __ASM_SH_MIGOR_H
+
+#define PORT_MSELCRB 0xa4050182
+#define BSC_CS4BCR 0xfec10010
+#define BSC_CS6ABCR 0xfec1001c
+#define BSC_CS4WCR 0xfec10030
+
+#include <video/sh_mobile_lcdc.h>
+
+int migor_lcd_qvga_setup(void *board_data, void *sys_ops_handle,
+			 struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
+
+#endif /* __ASM_SH_MIGOR_H */
-- 
cgit v1.1


From ba9a633787eed1e90d587282642580ad3d44f7fd Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 22 Jul 2009 15:14:29 +0000
Subject: sh: convert processor device setup functions to arch_initcall()

Convert the processor platform device setup
functions from __initcall() and sometimes
device_initcall() to arch_initcall().

This makes sure that the platform devices are
registered a bit earlier so the devices are
available when drivers register using initcall
levels earlier than device_initcall().

A good example is platform devices needed by
i2c-sh_mobile.c which registers a bit earlier
using subsys_initcall().

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh2/setup-sh7619.c  | 2 +-
 arch/sh/kernel/cpu/sh2a/setup-mxg.c    | 2 +-
 arch/sh/kernel/cpu/sh2a/setup-sh7201.c | 2 +-
 arch/sh/kernel/cpu/sh2a/setup-sh7203.c | 2 +-
 arch/sh/kernel/cpu/sh2a/setup-sh7206.c | 2 +-
 arch/sh/kernel/cpu/sh3/setup-sh7705.c  | 2 +-
 arch/sh/kernel/cpu/sh3/setup-sh770x.c  | 2 +-
 arch/sh/kernel/cpu/sh3/setup-sh7710.c  | 2 +-
 arch/sh/kernel/cpu/sh3/setup-sh7720.c  | 2 +-
 arch/sh/kernel/cpu/sh4/setup-sh4-202.c | 2 +-
 arch/sh/kernel/cpu/sh4/setup-sh7750.c  | 2 +-
 arch/sh/kernel/cpu/sh4/setup-sh7760.c  | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7343.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7366.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7724.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7763.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7770.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7780.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7785.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7786.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-shx3.c   | 2 +-
 arch/sh/kernel/cpu/sh5/setup-sh5.c     | 2 +-
 24 files changed, 24 insertions(+), 24 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
index 1379873..8555c05 100644
--- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c
+++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
@@ -187,7 +187,7 @@ static int __init sh7619_devices_setup(void)
 	return platform_add_devices(sh7619_devices,
 				    ARRAY_SIZE(sh7619_devices));
 }
-__initcall(sh7619_devices_setup);
+arch_initcall(sh7619_devices_setup);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh2a/setup-mxg.c b/arch/sh/kernel/cpu/sh2a/setup-mxg.c
index 869c2da..b673764 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-mxg.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-mxg.c
@@ -238,7 +238,7 @@ static int __init mxg_devices_setup(void)
 	return platform_add_devices(mxg_devices,
 				    ARRAY_SIZE(mxg_devices));
 }
-__initcall(mxg_devices_setup);
+arch_initcall(mxg_devices_setup);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
index d8febe1..fbde5b7 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
@@ -357,7 +357,7 @@ static int __init sh7201_devices_setup(void)
 	return platform_add_devices(sh7201_devices,
 				    ARRAY_SIZE(sh7201_devices));
 }
-__initcall(sh7201_devices_setup);
+arch_initcall(sh7201_devices_setup);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
index 62e3039..d3fd536 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
@@ -367,7 +367,7 @@ static int __init sh7203_devices_setup(void)
 	return platform_add_devices(sh7203_devices,
 				    ARRAY_SIZE(sh7203_devices));
 }
-__initcall(sh7203_devices_setup);
+arch_initcall(sh7203_devices_setup);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
index 3e6f3d7..a9ccc5e 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
@@ -338,7 +338,7 @@ static int __init sh7206_devices_setup(void)
 	return platform_add_devices(sh7206_devices,
 				    ARRAY_SIZE(sh7206_devices));
 }
-__initcall(sh7206_devices_setup);
+arch_initcall(sh7206_devices_setup);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
index 88f742f..c231059 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
@@ -222,7 +222,7 @@ static int __init sh7705_devices_setup(void)
 	return platform_add_devices(sh7705_devices,
 				    ARRAY_SIZE(sh7705_devices));
 }
-__initcall(sh7705_devices_setup);
+arch_initcall(sh7705_devices_setup);
 
 static struct platform_device *sh7705_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
index c563067..347ab35 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
@@ -250,7 +250,7 @@ static int __init sh770x_devices_setup(void)
 	return platform_add_devices(sh770x_devices,
 		ARRAY_SIZE(sh770x_devices));
 }
-__initcall(sh770x_devices_setup);
+arch_initcall(sh770x_devices_setup);
 
 static struct platform_device *sh770x_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
index efa76c8..717e90a 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
@@ -226,7 +226,7 @@ static int __init sh7710_devices_setup(void)
 	return platform_add_devices(sh7710_devices,
 				    ARRAY_SIZE(sh7710_devices));
 }
-__initcall(sh7710_devices_setup);
+arch_initcall(sh7710_devices_setup);
 
 static struct platform_device *sh7710_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
index 5b21077..74d8baa 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
@@ -388,7 +388,7 @@ static int __init sh7720_devices_setup(void)
 	return platform_add_devices(sh7720_devices,
 				    ARRAY_SIZE(sh7720_devices));
 }
-__initcall(sh7720_devices_setup);
+arch_initcall(sh7720_devices_setup);
 
 static struct platform_device *sh7720_early_devices[] __initdata = {
 	&cmt0_device,
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
index 6d088d1..de4827d 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
@@ -138,7 +138,7 @@ static int __init sh4202_devices_setup(void)
 	return platform_add_devices(sh4202_devices,
 				    ARRAY_SIZE(sh4202_devices));
 }
-__initcall(sh4202_devices_setup);
+arch_initcall(sh4202_devices_setup);
 
 static struct platform_device *sh4202_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
index 851672d..1b8b122 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
@@ -239,7 +239,7 @@ static int __init sh7750_devices_setup(void)
 	return platform_add_devices(sh7750_devices,
 				    ARRAY_SIZE(sh7750_devices));
 }
-__initcall(sh7750_devices_setup);
+arch_initcall(sh7750_devices_setup);
 
 static struct platform_device *sh7750_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
index 5b82251..7fbb7be 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
@@ -265,7 +265,7 @@ static int __init sh7760_devices_setup(void)
 	return platform_add_devices(sh7760_devices,
 				    ARRAY_SIZE(sh7760_devices));
 }
-__initcall(sh7760_devices_setup);
+arch_initcall(sh7760_devices_setup);
 
 static struct platform_device *sh7760_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
index 6307e08..ac4d567 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
@@ -325,7 +325,7 @@ static int __init sh7343_devices_setup(void)
 	return platform_add_devices(sh7343_devices,
 				    ARRAY_SIZE(sh7343_devices));
 }
-__initcall(sh7343_devices_setup);
+arch_initcall(sh7343_devices_setup);
 
 static struct platform_device *sh7343_early_devices[] __initdata = {
 	&cmt_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
index c18f7d0..1a956b1 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
@@ -318,7 +318,7 @@ static int __init sh7366_devices_setup(void)
 	return platform_add_devices(sh7366_devices,
 				    ARRAY_SIZE(sh7366_devices));
 }
-__initcall(sh7366_devices_setup);
+arch_initcall(sh7366_devices_setup);
 
 static struct platform_device *sh7366_early_devices[] __initdata = {
 	&cmt_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index ea524a2..cda76eb 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -359,7 +359,7 @@ static int __init sh7722_devices_setup(void)
 	return platform_add_devices(sh7722_devices,
 				    ARRAY_SIZE(sh7722_devices));
 }
-__initcall(sh7722_devices_setup);
+arch_initcall(sh7722_devices_setup);
 
 static struct platform_device *sh7722_early_devices[] __initdata = {
 	&cmt_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index e1bb80b..b45dace 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -473,7 +473,7 @@ static int __init sh7723_devices_setup(void)
 	return platform_add_devices(sh7723_devices,
 				    ARRAY_SIZE(sh7723_devices));
 }
-__initcall(sh7723_devices_setup);
+arch_initcall(sh7723_devices_setup);
 
 static struct platform_device *sh7723_early_devices[] __initdata = {
 	&cmt_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
index e5ac9eb..a04edaa 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
@@ -508,7 +508,7 @@ static int __init sh7724_devices_setup(void)
 	return platform_add_devices(sh7724_devices,
 				    ARRAY_SIZE(sh7724_devices));
 }
-device_initcall(sh7724_devices_setup);
+arch_initcall(sh7724_devices_setup);
 
 static struct platform_device *sh7724_early_devices[] __initdata = {
 	&cmt_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
index f1e0c0d..4659fff 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
@@ -314,7 +314,7 @@ static int __init sh7763_devices_setup(void)
 	return platform_add_devices(sh7763_devices,
 				    ARRAY_SIZE(sh7763_devices));
 }
-__initcall(sh7763_devices_setup);
+arch_initcall(sh7763_devices_setup);
 
 static struct platform_device *sh7763_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
index 1e86209..eead08d 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
@@ -368,7 +368,7 @@ static int __init sh7770_devices_setup(void)
 	return platform_add_devices(sh7770_devices,
 				    ARRAY_SIZE(sh7770_devices));
 }
-__initcall(sh7770_devices_setup);
+arch_initcall(sh7770_devices_setup);
 
 static struct platform_device *sh7770_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
index 715e05b..2c901f4 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
@@ -256,7 +256,7 @@ static int __init sh7780_devices_setup(void)
 	return platform_add_devices(sh7780_devices,
 				    ARRAY_SIZE(sh7780_devices));
 }
-__initcall(sh7780_devices_setup);
+arch_initcall(sh7780_devices_setup);
 
 static struct platform_device *sh7780_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
index af56140..7f6c718 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
@@ -263,7 +263,7 @@ static int __init sh7785_devices_setup(void)
 	return platform_add_devices(sh7785_devices,
 				    ARRAY_SIZE(sh7785_devices));
 }
-__initcall(sh7785_devices_setup);
+arch_initcall(sh7785_devices_setup);
 
 static struct platform_device *sh7785_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
index b700494..0104a8e 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
@@ -547,7 +547,7 @@ static int __init sh7786_devices_setup(void)
 	return platform_add_devices(sh7786_devices,
 				    ARRAY_SIZE(sh7786_devices));
 }
-device_initcall(sh7786_devices_setup);
+arch_initcall(sh7786_devices_setup);
 
 void __init plat_early_device_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
index 53c65fd..07f0789 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
@@ -256,7 +256,7 @@ static int __init shx3_devices_setup(void)
 	return platform_add_devices(shx3_devices,
 				    ARRAY_SIZE(shx3_devices));
 }
-__initcall(shx3_devices_setup);
+arch_initcall(shx3_devices_setup);
 
 void __init plat_early_device_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh5/setup-sh5.c b/arch/sh/kernel/cpu/sh5/setup-sh5.c
index f5ff1ac..6a0f82f 100644
--- a/arch/sh/kernel/cpu/sh5/setup-sh5.c
+++ b/arch/sh/kernel/cpu/sh5/setup-sh5.c
@@ -186,7 +186,7 @@ static int __init sh5_devices_setup(void)
 	return platform_add_devices(sh5_devices,
 				    ARRAY_SIZE(sh5_devices));
 }
-__initcall(sh5_devices_setup);
+arch_initcall(sh5_devices_setup);
 
 void __init plat_early_device_setup(void)
 {
-- 
cgit v1.1


From ba3a17019181af5d6ab898760620c4e9916396c2 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Thu, 13 Aug 2009 11:39:02 +0900
Subject: sh: fix i2c init order on Migo-R V2

Convert the Migo-R board code to register devices at
arch_initcall() time instead of __initcall(). This fix
unbreaks migor_ts touch screen driver support.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-migor/setup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/sh')

diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index f70f464..f9b2e4d 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -608,7 +608,7 @@ static int __init migor_devices_setup(void)
 
 	return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
 }
-__initcall(migor_devices_setup);
+arch_initcall(migor_devices_setup);
 
 /* Return the board specific boot mode pin configuration */
 static int migor_mode_pins(void)
-- 
cgit v1.1


From dbefd606a3b3634799b625f4900336e61c89e868 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 7 Aug 2009 03:52:18 +0000
Subject: sh: fix i2c init order on ap325rxa V2

Convert the AP325RXA board code to register devices at
arch_initcall() time instead of device_initcall(). This
fix unbreaks pcf8563 RTC driver support.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/board-ap325rxa.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/sh')

diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index 7ffd1b43..b9c88cc 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -547,7 +547,7 @@ static int __init ap325rxa_devices_setup(void)
 	return platform_add_devices(ap325rxa_devices,
 				ARRAY_SIZE(ap325rxa_devices));
 }
-device_initcall(ap325rxa_devices_setup);
+arch_initcall(ap325rxa_devices_setup);
 
 /* Return the board specific boot mode pin configuration */
 static int ap325rxa_mode_pins(void)
-- 
cgit v1.1


From 922b0dc59bb43f7ff3bb8b9558ffeb3ad6af528e Mon Sep 17 00:00:00 2001
From: Marcin Slusarz <marcin.slusarz@gmail.com>
Date: Sun, 9 Aug 2009 19:53:59 +0000
Subject: sh: use printk_once

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/ioremap_64.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/mm/ioremap_64.c b/arch/sh/mm/ioremap_64.c
index 828c859..b16843d 100644
--- a/arch/sh/mm/ioremap_64.c
+++ b/arch/sh/mm/ioremap_64.c
@@ -94,7 +94,6 @@ static struct resource *shmedia_find_resource(struct resource *root,
 static void __iomem *shmedia_alloc_io(unsigned long phys, unsigned long size,
 				      const char *name, unsigned long flags)
 {
-	static int printed_full;
 	struct xresource *xres;
 	struct resource *res;
 	char *tack;
@@ -108,11 +107,8 @@ static void __iomem *shmedia_alloc_io(unsigned long phys, unsigned long size,
 		tack = xres->xname;
 		res = &xres->xres;
 	} else {
-		if (!printed_full) {
-			printk(KERN_NOTICE "%s: done with statics, "
+		printk_once(KERN_NOTICE "%s: done with statics, "
 			       "switching to kmalloc\n", __func__);
-			printed_full = 1;
-		}
 		tlen = strlen(name);
 		tack = kmalloc(sizeof(struct resource) + tlen + 1, GFP_KERNEL);
 		if (!tack)
-- 
cgit v1.1


From 4e14dfc722b8e9e07a355f97aa60a3d9f0739071 Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Fri, 7 Aug 2009 16:11:19 +0100
Subject: sh: Use the generalized stacktrace ops

Copy the stacktrace ops code from x86 and provide a central function for
use by functions that need to dump a callstack.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/stacktrace.h |  25 ++++++++
 arch/sh/kernel/Makefile_32       |   2 +-
 arch/sh/kernel/dumpstack.c       | 128 +++++++++++++++++++++++++++++++++++++++
 arch/sh/kernel/stacktrace.c      |  87 ++++++++++++++++++--------
 arch/sh/kernel/traps_32.c        |  24 --------
 arch/sh/oprofile/backtrace.c     |  56 +++++++++++------
 6 files changed, 251 insertions(+), 71 deletions(-)
 create mode 100644 arch/sh/include/asm/stacktrace.h
 create mode 100644 arch/sh/kernel/dumpstack.c

(limited to 'arch/sh')

diff --git a/arch/sh/include/asm/stacktrace.h b/arch/sh/include/asm/stacktrace.h
new file mode 100644
index 0000000..7970182
--- /dev/null
+++ b/arch/sh/include/asm/stacktrace.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2009  Matt Fleming
+ *
+ * Based on:
+ *	The x86 implementation - arch/x86/include/asm/stacktrace.h
+ */
+#ifndef _ASM_SH_STACKTRACE_H
+#define _ASM_SH_STACKTRACE_H
+
+/* Generic stack tracer with callbacks */
+
+struct stacktrace_ops {
+	void (*warning)(void *data, char *msg);
+	/* msg must contain %s for the symbol */
+	void (*warning_symbol)(void *data, char *msg, unsigned long symbol);
+	void (*address)(void *data, unsigned long address, int reliable);
+	/* On negative return stop dumping */
+	int (*stack)(void *data, char *name);
+};
+
+void dump_trace(struct task_struct *tsk, struct pt_regs *regs,
+		unsigned long *stack,
+		const struct stacktrace_ops *ops, void *data);
+
+#endif /* _ASM_SH_STACKTRACE_H */
diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32
index 94ed99b..6b32de7 100644
--- a/arch/sh/kernel/Makefile_32
+++ b/arch/sh/kernel/Makefile_32
@@ -9,7 +9,7 @@ ifdef CONFIG_FUNCTION_TRACER
 CFLAGS_REMOVE_ftrace.o = -pg
 endif
 
-obj-y	:= debugtraps.o idle.o io.o io_generic.o irq.o			\
+obj-y	:= debugtraps.o dumpstack.o idle.o io.o io_generic.o irq.o	\
 	   machvec.o process_32.o ptrace_32.o setup.o signal_32.o	\
 	   sys_sh.o sys_sh32.o syscalls_32.o time.o topology.o	\
 	   traps.o traps_32.o
diff --git a/arch/sh/kernel/dumpstack.c b/arch/sh/kernel/dumpstack.c
new file mode 100644
index 0000000..6ab996f
--- /dev/null
+++ b/arch/sh/kernel/dumpstack.c
@@ -0,0 +1,128 @@
+/*
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ *  Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs
+ *  Copyright (C) 2009  Matt Fleming
+ */
+#include <linux/kallsyms.h>
+#include <linux/ftrace.h>
+#include <linux/debug_locks.h>
+
+#include <asm/stacktrace.h>
+
+void printk_address(unsigned long address, int reliable)
+{
+	printk(" [<%p>] %s%pS\n", (void *) address,
+			reliable ? "" : "? ", (void *) address);
+}
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+static void
+print_ftrace_graph_addr(unsigned long addr, void *data,
+			const struct stacktrace_ops *ops,
+			struct thread_info *tinfo, int *graph)
+{
+	struct task_struct *task = tinfo->task;
+	unsigned long ret_addr;
+	int index = task->curr_ret_stack;
+
+	if (addr != (unsigned long)return_to_handler)
+		return;
+
+	if (!task->ret_stack || index < *graph)
+		return;
+
+	index -= *graph;
+	ret_addr = task->ret_stack[index].ret;
+
+	ops->address(data, ret_addr, 1);
+
+	(*graph)++;
+}
+#else
+static inline void
+print_ftrace_graph_addr(unsigned long addr, void *data,
+			const struct stacktrace_ops *ops,
+			struct thread_info *tinfo, int *graph)
+{ }
+#endif
+
+/*
+ * Unwind the call stack and pass information to the stacktrace_ops
+ * functions.
+ */
+void dump_trace(struct task_struct *task, struct pt_regs *regs,
+		unsigned long *sp, const struct stacktrace_ops *ops,
+		void *data)
+{
+	struct thread_info *context;
+	int graph = 0;
+
+	context = (struct thread_info *)
+		((unsigned long)sp & (~(THREAD_SIZE - 1)));
+
+	while (!kstack_end(sp)) {
+		unsigned long addr = *sp++;
+
+		if (__kernel_text_address(addr)) {
+			ops->address(data, addr, 0);
+
+			print_ftrace_graph_addr(addr, data, ops,
+						context, &graph);
+		}
+	}
+}
+EXPORT_SYMBOL(dump_trace);
+
+
+static void
+print_trace_warning_symbol(void *data, char *msg, unsigned long symbol)
+{
+	printk(data);
+	print_symbol(msg, symbol);
+	printk("\n");
+}
+
+static void print_trace_warning(void *data, char *msg)
+{
+	printk("%s%s\n", (char *)data, msg);
+}
+
+static int print_trace_stack(void *data, char *name)
+{
+	printk("%s <%s> ", (char *)data, name);
+	return 0;
+}
+
+/*
+ * Print one address/symbol entries per line.
+ */
+static void print_trace_address(void *data, unsigned long addr, int reliable)
+{
+	printk(data);
+	printk_address(addr, reliable);
+}
+
+static const struct stacktrace_ops print_trace_ops = {
+	.warning = print_trace_warning,
+	.warning_symbol = print_trace_warning_symbol,
+	.stack = print_trace_stack,
+	.address = print_trace_address,
+};
+
+void show_trace(struct task_struct *tsk, unsigned long *sp,
+		struct pt_regs *regs)
+{
+	if (regs && user_mode(regs))
+		return;
+
+	printk("\nCall trace:\n");
+
+	dump_trace(tsk, regs, sp, &print_trace_ops, "");
+
+	printk("\n");
+
+	if (!tsk)
+		tsk = current;
+
+	debug_show_held_locks(tsk);
+}
diff --git a/arch/sh/kernel/stacktrace.c b/arch/sh/kernel/stacktrace.c
index 1a2a5eb..6c24a40 100644
--- a/arch/sh/kernel/stacktrace.c
+++ b/arch/sh/kernel/stacktrace.c
@@ -14,46 +14,81 @@
 #include <linux/thread_info.h>
 #include <linux/module.h>
 #include <asm/ptrace.h>
+#include <asm/stacktrace.h>
+
+static void save_stack_warning(void *data, char *msg)
+{
+}
+
+static void
+save_stack_warning_symbol(void *data, char *msg, unsigned long symbol)
+{
+}
+
+static int save_stack_stack(void *data, char *name)
+{
+	return 0;
+}
 
 /*
  * Save stack-backtrace addresses into a stack_trace buffer.
  */
+static void save_stack_address(void *data, unsigned long addr, int reliable)
+{
+	struct stack_trace *trace = data;
+
+	if (trace->skip > 0) {
+		trace->skip--;
+		return;
+	}
+
+	if (trace->nr_entries < trace->max_entries)
+		trace->entries[trace->nr_entries++] = addr;
+}
+
+static const struct stacktrace_ops save_stack_ops = {
+	.warning = save_stack_warning,
+	.warning_symbol = save_stack_warning_symbol,
+	.stack = save_stack_stack,
+	.address = save_stack_address,
+};
+
 void save_stack_trace(struct stack_trace *trace)
 {
 	unsigned long *sp = (unsigned long *)current_stack_pointer;
 
-	while (!kstack_end(sp)) {
-		unsigned long addr = *sp++;
-
-		if (__kernel_text_address(addr)) {
-			if (trace->skip > 0)
-				trace->skip--;
-			else
-				trace->entries[trace->nr_entries++] = addr;
-			if (trace->nr_entries >= trace->max_entries)
-				break;
-		}
-	}
+	dump_trace(current, NULL, sp,  &save_stack_ops, trace);
 }
 EXPORT_SYMBOL_GPL(save_stack_trace);
 
+static void
+save_stack_address_nosched(void *data, unsigned long addr, int reliable)
+{
+	struct stack_trace *trace = (struct stack_trace *)data;
+
+	if (in_sched_functions(addr))
+		return;
+
+	if (trace->skip > 0) {
+		trace->skip--;
+		return;
+	}
+
+	if (trace->nr_entries < trace->max_entries)
+		trace->entries[trace->nr_entries++] = addr;
+}
+
+static const struct stacktrace_ops save_stack_ops_nosched = {
+	.warning = save_stack_warning,
+	.warning_symbol = save_stack_warning_symbol,
+	.stack = save_stack_stack,
+	.address = save_stack_address_nosched,
+};
+
 void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 {
 	unsigned long *sp = (unsigned long *)tsk->thread.sp;
 
-	while (!kstack_end(sp)) {
-		unsigned long addr = *sp++;
-
-		if (__kernel_text_address(addr)) {
-			if (in_sched_functions(addr))
-				break;
-			if (trace->skip > 0)
-				trace->skip--;
-			else
-				trace->entries[trace->nr_entries++] = addr;
-			if (trace->nr_entries >= trace->max_entries)
-				break;
-		}
-	}
+	dump_trace(current, NULL, sp,  &save_stack_ops_nosched, trace);
 }
 EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index 2b77277..5634264 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -858,30 +858,6 @@ void __init trap_init(void)
 	per_cpu_trap_init();
 }
 
-void show_trace(struct task_struct *tsk, unsigned long *sp,
-		struct pt_regs *regs)
-{
-	unsigned long addr;
-
-	if (regs && user_mode(regs))
-		return;
-
-	printk("\nCall trace:\n");
-
-	while (!kstack_end(sp)) {
-		addr = *sp++;
-		if (kernel_text_address(addr))
-			print_ip_sym(addr);
-	}
-
-	printk("\n");
-
-	if (!tsk)
-		tsk = current;
-
-	debug_show_held_locks(tsk);
-}
-
 void show_stack(struct task_struct *tsk, unsigned long *sp)
 {
 	unsigned long stack;
diff --git a/arch/sh/oprofile/backtrace.c b/arch/sh/oprofile/backtrace.c
index 9499a29..62e4e4d 100644
--- a/arch/sh/oprofile/backtrace.c
+++ b/arch/sh/oprofile/backtrace.c
@@ -20,6 +20,39 @@
 #include <asm/ptrace.h>
 #include <asm/uaccess.h>
 #include <asm/sections.h>
+#include <asm/stacktrace.h>
+
+static void backtrace_warning_symbol(void *data, char *msg,
+				     unsigned long symbol)
+{
+	/* Ignore warnings */
+}
+
+static void backtrace_warning(void *data, char *msg)
+{
+	/* Ignore warnings */
+}
+
+static int backtrace_stack(void *data, char *name)
+{
+	/* Yes, we want all stacks */
+	return 0;
+}
+
+static void backtrace_address(void *data, unsigned long addr, int reliable)
+{
+	unsigned int *depth = data;
+
+	if ((*depth)--)
+		oprofile_add_trace(addr);
+}
+
+static struct stacktrace_ops backtrace_ops = {
+	.warning = backtrace_warning,
+	.warning_symbol = backtrace_warning_symbol,
+	.stack = backtrace_stack,
+	.address = backtrace_address,
+};
 
 /* Limit to stop backtracing too far. */
 static int backtrace_limit = 20;
@@ -74,23 +107,6 @@ static int valid_kernel_stack(unsigned long *stackaddr, struct pt_regs *regs)
 	return ((unsigned long)stackaddr > stack) && ((unsigned long)stackaddr < stack_base);
 }
 
-static unsigned long *
-kernel_backtrace(unsigned long *stackaddr, struct pt_regs *regs)
-{
-	unsigned long addr;
-
-	/*
-	 * If not a valid kernel address, keep going till we find one
-	 * or the SP stops being a valid address.
-	 */
-	do {
-		addr = *stackaddr++;
-		oprofile_add_trace(addr);
-	} while (valid_kernel_stack(stackaddr, regs));
-
-	return stackaddr;
-}
-
 void sh_backtrace(struct pt_regs * const regs, unsigned int depth)
 {
 	unsigned long *stackaddr;
@@ -103,9 +119,9 @@ void sh_backtrace(struct pt_regs * const regs, unsigned int depth)
 
 	stackaddr = (unsigned long *)regs->regs[15];
 	if (!user_mode(regs)) {
-		while (depth-- && valid_kernel_stack(stackaddr, regs))
-			stackaddr = kernel_backtrace(stackaddr, regs);
-
+		if (depth)
+			dump_trace(NULL, regs, stackaddr,
+				   &backtrace_ops, &depth);
 		return;
 	}
 
-- 
cgit v1.1


From bf61ad1f870be88676a07bfef69acd59ce10172e Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Thu, 13 Aug 2009 19:49:03 +0900
Subject: sh: Allow multiple stack unwinders to be setup

Provide an interface for registering stack unwinders, where each
unwinder is given a rating that describes its accuracy and
complexity. The more accurate an unwinder is, the more complex it is.

If a the current stack unwinder faults, then the stack unwinder with the
next highest accuracy will be used in its place (provided one is
available). For example, this allows unwinders, such as the DWARF
unwinder, to liberally sprinkle BUG()s to catch badly formed DWARF debug
info.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/unwinder.h |  25 +++++++
 arch/sh/kernel/Makefile_32     |   4 +-
 arch/sh/kernel/Makefile_64     |   2 +-
 arch/sh/kernel/unwinder.c      | 162 +++++++++++++++++++++++++++++++++++++++++
 4 files changed, 190 insertions(+), 3 deletions(-)
 create mode 100644 arch/sh/include/asm/unwinder.h
 create mode 100644 arch/sh/kernel/unwinder.c

(limited to 'arch/sh')

diff --git a/arch/sh/include/asm/unwinder.h b/arch/sh/include/asm/unwinder.h
new file mode 100644
index 0000000..3dc5514
--- /dev/null
+++ b/arch/sh/include/asm/unwinder.h
@@ -0,0 +1,25 @@
+#ifndef _LINUX_UNWINDER_H
+#define _LINUX_UNWINDER_H
+
+#include <asm/stacktrace.h>
+
+struct unwinder {
+	const char *name;
+	struct list_head list;
+	int rating;
+	void (*dump)(struct task_struct *, struct pt_regs *,
+		     unsigned long *, const struct stacktrace_ops *, void *);
+};
+
+extern int unwinder_init(void);
+extern int unwinder_register(struct unwinder *);
+
+extern void unwind_stack(struct task_struct *, struct pt_regs *,
+			 unsigned long *, const struct stacktrace_ops *,
+			 void *);
+
+extern void stack_reader_dump(struct task_struct *, struct pt_regs *,
+			      unsigned long *, const struct stacktrace_ops *,
+			      void *);
+
+#endif /* _LINUX_UNWINDER_H */
diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32
index 6b32de7..37a3b77 100644
--- a/arch/sh/kernel/Makefile_32
+++ b/arch/sh/kernel/Makefile_32
@@ -11,8 +11,8 @@ endif
 
 obj-y	:= debugtraps.o dumpstack.o idle.o io.o io_generic.o irq.o	\
 	   machvec.o process_32.o ptrace_32.o setup.o signal_32.o	\
-	   sys_sh.o sys_sh32.o syscalls_32.o time.o topology.o	\
-	   traps.o traps_32.o
+	   sys_sh.o sys_sh32.o syscalls_32.o time.o topology.o		\
+	   traps.o traps_32.o unwinder.o
 
 obj-y				+= cpu/
 obj-$(CONFIG_VSYSCALL)		+= vsyscall/
diff --git a/arch/sh/kernel/Makefile_64 b/arch/sh/kernel/Makefile_64
index 67b9f6c..00b73e7 100644
--- a/arch/sh/kernel/Makefile_64
+++ b/arch/sh/kernel/Makefile_64
@@ -2,7 +2,7 @@ extra-y	:= head_64.o init_task.o vmlinux.lds
 
 obj-y	:= debugtraps.o idle.o io.o io_generic.o irq.o machvec.o process_64.o \
 	   ptrace_64.o setup.o signal_64.o sys_sh.o sys_sh64.o \
-	   syscalls_64.o time.o topology.o traps.o traps_64.o
+	   syscalls_64.o time.o topology.o traps.o traps_64.o unwinder.o
 
 obj-y				+= cpu/
 obj-$(CONFIG_SMP)		+= smp.o
diff --git a/arch/sh/kernel/unwinder.c b/arch/sh/kernel/unwinder.c
new file mode 100644
index 0000000..2b30fa2
--- /dev/null
+++ b/arch/sh/kernel/unwinder.c
@@ -0,0 +1,162 @@
+/*
+ * Copyright (C) 2009  Matt Fleming
+ *
+ * Based, in part, on kernel/time/clocksource.c.
+ *
+ * This file provides arbitration code for stack unwinders.
+ *
+ * Multiple stack unwinders can be available on a system, usually with
+ * the most accurate unwinder being the currently active one.
+ */
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <asm/unwinder.h>
+#include <asm/atomic.h>
+
+/*
+ * This is the most basic stack unwinder an architecture can
+ * provide. For architectures without reliable frame pointers, e.g.
+ * RISC CPUs, it can be implemented by looking through the stack for
+ * addresses that lie within the kernel text section.
+ *
+ * Other CPUs, e.g. x86, can use their frame pointer register to
+ * construct more accurate stack traces.
+ */
+static struct list_head unwinder_list;
+static struct unwinder stack_reader = {
+	.name = "stack-reader",
+	.dump = stack_reader_dump,
+	.rating = 50,
+	.list = {
+		.next = &unwinder_list,
+		.prev = &unwinder_list,
+	},
+};
+
+/*
+ * "curr_unwinder" points to the stack unwinder currently in use. This
+ * is the unwinder with the highest rating.
+ *
+ * "unwinder_list" is a linked-list of all available unwinders, sorted
+ * by rating.
+ *
+ * All modifications of "curr_unwinder" and "unwinder_list" must be
+ * performed whilst holding "unwinder_lock".
+ */
+static struct unwinder *curr_unwinder = &stack_reader;
+
+static struct list_head unwinder_list = {
+	.next = &stack_reader.list,
+	.prev = &stack_reader.list,
+};
+
+static DEFINE_SPINLOCK(unwinder_lock);
+
+static atomic_t unwinder_running = ATOMIC_INIT(0);
+
+/**
+ * select_unwinder - Select the best registered stack unwinder.
+ *
+ * Private function. Must hold unwinder_lock when called.
+ *
+ * Select the stack unwinder with the best rating. This is useful for
+ * setting up curr_unwinder.
+ */
+static struct unwinder *select_unwinder(void)
+{
+	struct unwinder *best;
+
+	if (list_empty(&unwinder_list))
+		return NULL;
+
+	best = list_entry(unwinder_list.next, struct unwinder, list);
+	if (best == curr_unwinder)
+		return NULL;
+
+	return best;
+}
+
+/*
+ * Enqueue the stack unwinder sorted by rating.
+ */
+static int unwinder_enqueue(struct unwinder *ops)
+{
+	struct list_head *tmp, *entry = &unwinder_list;
+
+	list_for_each(tmp, &unwinder_list) {
+		struct unwinder *o;
+
+		o = list_entry(tmp, struct unwinder, list);
+		if (o == ops)
+			return -EBUSY;
+		/* Keep track of the place, where to insert */
+		if (o->rating >= ops->rating)
+			entry = tmp;
+	}
+	list_add(&ops->list, entry);
+
+	return 0;
+}
+
+/**
+ * unwinder_register - Used to install new stack unwinder
+ * @u: unwinder to be registered
+ *
+ * Install the new stack unwinder on the unwinder list, which is sorted
+ * by rating.
+ *
+ * Returns -EBUSY if registration fails, zero otherwise.
+ */
+int unwinder_register(struct unwinder *u)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&unwinder_lock, flags);
+	ret = unwinder_enqueue(u);
+	if (!ret)
+		curr_unwinder = select_unwinder();
+	spin_unlock_irqrestore(&unwinder_lock, flags);
+
+	return ret;
+}
+
+/*
+ * Unwind the call stack and pass information to the stacktrace_ops
+ * functions. Also handle the case where we need to switch to a new
+ * stack dumper because the current one faulted unexpectedly.
+ */
+void unwind_stack(struct task_struct *task, struct pt_regs *regs,
+		  unsigned long *sp, const struct stacktrace_ops *ops,
+		  void *data)
+{
+	unsigned long flags;
+
+	/*
+	 * The problem with unwinders with high ratings is that they are
+	 * inherently more complicated than the simple ones with lower
+	 * ratings. We are therefore more likely to fault in the
+	 * complicated ones, e.g. hitting BUG()s. If we fault in the
+	 * code for the current stack unwinder we try to downgrade to
+	 * one with a lower rating.
+	 *
+	 * Hopefully this will give us a semi-reliable stacktrace so we
+	 * can diagnose why curr_unwinder->dump() faulted.
+	 */
+	if (atomic_inc_return(&unwinder_running) != 1) {
+		spin_lock_irqsave(&unwinder_lock, flags);
+
+		if (!list_is_singular(&unwinder_list)) {
+			list_del(&curr_unwinder->list);
+			curr_unwinder = select_unwinder();
+		}
+
+		spin_unlock_irqrestore(&unwinder_lock, flags);
+		atomic_dec(&unwinder_running);
+	}
+
+	curr_unwinder->dump(task, regs, sp, ops, data);
+
+	atomic_dec(&unwinder_running);
+}
-- 
cgit v1.1


From 0eff9f66de79a0707a9c3a2f8528ccfd62100f0b Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Tue, 11 Aug 2009 22:43:20 +0100
Subject: sh: Use the new stack unwinder API

Instead of implementing our own stack unwinder via dump_trace() we
should use the new stack unwinder API because it is more modular. This
change allows us to decouple the interface for generating stacktraces
from the implementation of a stack unwinder.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/dumpstack.c   | 17 ++++++-----------
 arch/sh/kernel/stacktrace.c  |  5 +++--
 arch/sh/oprofile/backtrace.c |  5 +++--
 3 files changed, 12 insertions(+), 15 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/dumpstack.c b/arch/sh/kernel/dumpstack.c
index 6ab996f..005dc1d 100644
--- a/arch/sh/kernel/dumpstack.c
+++ b/arch/sh/kernel/dumpstack.c
@@ -6,7 +6,7 @@
 #include <linux/kallsyms.h>
 #include <linux/ftrace.h>
 #include <linux/debug_locks.h>
-
+#include <asm/unwinder.h>
 #include <asm/stacktrace.h>
 
 void printk_address(unsigned long address, int reliable)
@@ -46,13 +46,10 @@ print_ftrace_graph_addr(unsigned long addr, void *data,
 { }
 #endif
 
-/*
- * Unwind the call stack and pass information to the stacktrace_ops
- * functions.
- */
-void dump_trace(struct task_struct *task, struct pt_regs *regs,
-		unsigned long *sp, const struct stacktrace_ops *ops,
-		void *data)
+void
+stack_reader_dump(struct task_struct *task, struct pt_regs *regs,
+		  unsigned long *sp, const struct stacktrace_ops *ops,
+		  void *data)
 {
 	struct thread_info *context;
 	int graph = 0;
@@ -71,8 +68,6 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs,
 		}
 	}
 }
-EXPORT_SYMBOL(dump_trace);
-
 
 static void
 print_trace_warning_symbol(void *data, char *msg, unsigned long symbol)
@@ -117,7 +112,7 @@ void show_trace(struct task_struct *tsk, unsigned long *sp,
 
 	printk("\nCall trace:\n");
 
-	dump_trace(tsk, regs, sp, &print_trace_ops, "");
+	unwind_stack(tsk, regs, sp, &print_trace_ops, "");
 
 	printk("\n");
 
diff --git a/arch/sh/kernel/stacktrace.c b/arch/sh/kernel/stacktrace.c
index 6c24a40..45b1add 100644
--- a/arch/sh/kernel/stacktrace.c
+++ b/arch/sh/kernel/stacktrace.c
@@ -13,6 +13,7 @@
 #include <linux/stacktrace.h>
 #include <linux/thread_info.h>
 #include <linux/module.h>
+#include <asm/unwinder.h>
 #include <asm/ptrace.h>
 #include <asm/stacktrace.h>
 
@@ -57,7 +58,7 @@ void save_stack_trace(struct stack_trace *trace)
 {
 	unsigned long *sp = (unsigned long *)current_stack_pointer;
 
-	dump_trace(current, NULL, sp,  &save_stack_ops, trace);
+	unwind_stack(current, NULL, sp,  &save_stack_ops, trace);
 }
 EXPORT_SYMBOL_GPL(save_stack_trace);
 
@@ -89,6 +90,6 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 {
 	unsigned long *sp = (unsigned long *)tsk->thread.sp;
 
-	dump_trace(current, NULL, sp,  &save_stack_ops_nosched, trace);
+	unwind_stack(current, NULL, sp,  &save_stack_ops_nosched, trace);
 }
 EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
diff --git a/arch/sh/oprofile/backtrace.c b/arch/sh/oprofile/backtrace.c
index 62e4e4d..37cd75d 100644
--- a/arch/sh/oprofile/backtrace.c
+++ b/arch/sh/oprofile/backtrace.c
@@ -17,6 +17,7 @@
 #include <linux/sched.h>
 #include <linux/kallsyms.h>
 #include <linux/mm.h>
+#include <asm/unwinder.h>
 #include <asm/ptrace.h>
 #include <asm/uaccess.h>
 #include <asm/sections.h>
@@ -120,8 +121,8 @@ void sh_backtrace(struct pt_regs * const regs, unsigned int depth)
 	stackaddr = (unsigned long *)regs->regs[15];
 	if (!user_mode(regs)) {
 		if (depth)
-			dump_trace(NULL, regs, stackaddr,
-				   &backtrace_ops, &depth);
+			unwind_stack(NULL, regs, stackaddr,
+				     &backtrace_ops, &depth);
 		return;
 	}
 
-- 
cgit v1.1


From bd353861c735b2265c9d8b2559960c693e7c68ab Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Fri, 14 Aug 2009 01:58:43 +0900
Subject: sh: dwarf unwinder support.

This is a first cut at a generic DWARF unwinder for the kernel. It's
still lacking DWARF64 support and the DWARF expression support hasn't
been tested very well but it is generating proper stacktraces on SH for
WARN_ON() and NULL dereferences.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig.debug             |   8 +
 arch/sh/Makefile                  |   4 +
 arch/sh/include/asm/dwarf.h       | 407 ++++++++++++++++++
 arch/sh/include/asm/sections.h    |   1 +
 arch/sh/include/asm/vmlinux.lds.h |  17 +
 arch/sh/kernel/Makefile_32        |   1 +
 arch/sh/kernel/Makefile_64        |   1 +
 arch/sh/kernel/dwarf.c            | 876 ++++++++++++++++++++++++++++++++++++++
 arch/sh/kernel/irq.c              |   4 +
 arch/sh/kernel/vmlinux.lds.S      |   4 +-
 10 files changed, 1322 insertions(+), 1 deletion(-)
 create mode 100644 arch/sh/include/asm/dwarf.h
 create mode 100644 arch/sh/include/asm/vmlinux.lds.h
 create mode 100644 arch/sh/kernel/dwarf.c

(limited to 'arch/sh')

diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 763b792..741d20f 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -110,6 +110,14 @@ config DUMP_CODE
 
 	  Those looking for more verbose debugging output should say Y.
 
+config DWARF_UNWINDER
+	bool "Enable the DWARF unwinder for stacktraces"
+	select FRAME_POINTER
+	default n
+	help
+	  Enabling this option will make stacktraces more accurate, at
+	  the cost of an increase in overall kernel size.
+
 config SH_NO_BSS_INIT
 	bool "Avoid zeroing BSS (to speed-up startup on suitable platforms)"
 	depends on DEBUG_KERNEL
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index b6ff337..e26421b 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -191,6 +191,10 @@ ifeq ($(CONFIG_MCOUNT),y)
   KBUILD_CFLAGS += -pg
 endif
 
+ifeq ($(CONFIG_DWARF_UNWINDER),y)
+  KBUILD_CFLAGS += -fasynchronous-unwind-tables
+endif
+
 libs-$(CONFIG_SUPERH32)		:= arch/sh/lib/	$(libs-y)
 libs-$(CONFIG_SUPERH64)		:= arch/sh/lib64/ $(libs-y)
 
diff --git a/arch/sh/include/asm/dwarf.h b/arch/sh/include/asm/dwarf.h
new file mode 100644
index 0000000..23eba12
--- /dev/null
+++ b/arch/sh/include/asm/dwarf.h
@@ -0,0 +1,407 @@
+/*
+ * Copyright (C) 2009 Matt Fleming <matt@console-pimps.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#ifndef __ASM_SH_DWARF_H
+#define __ASM_SH_DWARF_H
+
+#ifdef CONFIG_DWARF_UNWINDER
+
+/*
+ * DWARF expression operations
+ */
+#define DW_OP_addr	0x03
+#define DW_OP_deref	0x06
+#define DW_OP_const1u	0x08
+#define DW_OP_const1s	0x09
+#define DW_OP_const2u	0x0a
+#define DW_OP_const2s	0x0b
+#define DW_OP_const4u	0x0c
+#define DW_OP_const4s	0x0d
+#define DW_OP_const8u	0x0e
+#define DW_OP_const8s	0x0f
+#define DW_OP_constu	0x10
+#define DW_OP_consts	0x11
+#define DW_OP_dup	0x12
+#define DW_OP_drop	0x13
+#define DW_OP_over	0x14
+#define DW_OP_pick	0x15
+#define DW_OP_swap	0x16
+#define DW_OP_rot	0x17
+#define DW_OP_xderef	0x18
+#define DW_OP_abs	0x19
+#define DW_OP_and	0x1a
+#define DW_OP_div	0x1b
+#define DW_OP_minus	0x1c
+#define DW_OP_mod	0x1d
+#define DW_OP_mul	0x1e
+#define DW_OP_neg	0x1f
+#define DW_OP_not	0x20
+#define DW_OP_or	0x21
+#define DW_OP_plus	0x22
+#define DW_OP_plus_uconst	0x23
+#define DW_OP_shl	0x24
+#define DW_OP_shr	0x25
+#define DW_OP_shra	0x26
+#define DW_OP_xor	0x27
+#define DW_OP_skip	0x2f
+#define DW_OP_bra	0x28
+#define DW_OP_eq	0x29
+#define DW_OP_ge	0x2a
+#define DW_OP_gt	0x2b
+#define DW_OP_le	0x2c
+#define DW_OP_lt	0x2d
+#define DW_OP_ne	0x2e
+#define DW_OP_lit0	0x30
+#define DW_OP_lit1	0x31
+#define DW_OP_lit2	0x32
+#define DW_OP_lit3	0x33
+#define DW_OP_lit4	0x34
+#define DW_OP_lit5	0x35
+#define DW_OP_lit6	0x36
+#define DW_OP_lit7	0x37
+#define DW_OP_lit8	0x38
+#define DW_OP_lit9	0x39
+#define DW_OP_lit10	0x3a
+#define DW_OP_lit11	0x3b
+#define DW_OP_lit12	0x3c
+#define DW_OP_lit13	0x3d
+#define DW_OP_lit14	0x3e
+#define DW_OP_lit15	0x3f
+#define DW_OP_lit16	0x40
+#define DW_OP_lit17	0x41
+#define DW_OP_lit18	0x42
+#define DW_OP_lit19	0x43
+#define DW_OP_lit20	0x44
+#define DW_OP_lit21	0x45
+#define DW_OP_lit22	0x46
+#define DW_OP_lit23	0x47
+#define DW_OP_lit24	0x48
+#define DW_OP_lit25	0x49
+#define DW_OP_lit26	0x4a
+#define DW_OP_lit27	0x4b
+#define DW_OP_lit28	0x4c
+#define DW_OP_lit29	0x4d
+#define DW_OP_lit30	0x4e
+#define DW_OP_lit31	0x4f
+#define DW_OP_reg0	0x50
+#define DW_OP_reg1	0x51
+#define DW_OP_reg2	0x52
+#define DW_OP_reg3	0x53
+#define DW_OP_reg4	0x54
+#define DW_OP_reg5	0x55
+#define DW_OP_reg6	0x56
+#define DW_OP_reg7	0x57
+#define DW_OP_reg8	0x58
+#define DW_OP_reg9	0x59
+#define DW_OP_reg10	0x5a
+#define DW_OP_reg11	0x5b
+#define DW_OP_reg12	0x5c
+#define DW_OP_reg13	0x5d
+#define DW_OP_reg14	0x5e
+#define DW_OP_reg15	0x5f
+#define DW_OP_reg16	0x60
+#define DW_OP_reg17	0x61
+#define DW_OP_reg18	0x62
+#define DW_OP_reg19	0x63
+#define DW_OP_reg20	0x64
+#define DW_OP_reg21	0x65
+#define DW_OP_reg22	0x66
+#define DW_OP_reg23	0x67
+#define DW_OP_reg24	0x68
+#define DW_OP_reg25	0x69
+#define DW_OP_reg26	0x6a
+#define DW_OP_reg27	0x6b
+#define DW_OP_reg28	0x6c
+#define DW_OP_reg29	0x6d
+#define DW_OP_reg30	0x6e
+#define DW_OP_reg31	0x6f
+#define DW_OP_breg0	0x70
+#define DW_OP_breg1	0x71
+#define DW_OP_breg2	0x72
+#define DW_OP_breg3	0x73
+#define DW_OP_breg4	0x74
+#define DW_OP_breg5	0x75
+#define DW_OP_breg6	0x76
+#define DW_OP_breg7	0x77
+#define DW_OP_breg8	0x78
+#define DW_OP_breg9	0x79
+#define DW_OP_breg10	0x7a
+#define DW_OP_breg11	0x7b
+#define DW_OP_breg12	0x7c
+#define DW_OP_breg13	0x7d
+#define DW_OP_breg14	0x7e
+#define DW_OP_breg15	0x7f
+#define DW_OP_breg16	0x80
+#define DW_OP_breg17	0x81
+#define DW_OP_breg18	0x82
+#define DW_OP_breg19	0x83
+#define DW_OP_breg20	0x84
+#define DW_OP_breg21	0x85
+#define DW_OP_breg22	0x86
+#define DW_OP_breg23	0x87
+#define DW_OP_breg24	0x88
+#define DW_OP_breg25	0x89
+#define DW_OP_breg26	0x8a
+#define DW_OP_breg27	0x8b
+#define DW_OP_breg28	0x8c
+#define DW_OP_breg29	0x8d
+#define DW_OP_breg30	0x8e
+#define DW_OP_breg31	0x8f
+#define DW_OP_regx	0x90
+#define DW_OP_fbreg	0x91
+#define DW_OP_bregx	0x92
+#define DW_OP_piece	0x93
+#define DW_OP_deref_size	0x94
+#define DW_OP_xderef_size	0x95
+#define DW_OP_nop	0x96
+#define DW_OP_push_object_address	0x97
+#define DW_OP_call2	0x98
+#define DW_OP_call4	0x99
+#define DW_OP_call_ref	0x9a
+#define DW_OP_form_tls_address	0x9b
+#define DW_OP_call_frame_cfa	0x9c
+#define DW_OP_bit_piece	0x9d
+#define DW_OP_lo_user	0xe0
+#define DW_OP_hi_user	0xff
+
+/*
+ * Addresses used in FDE entries in the .eh_frame section may be encoded
+ * using one of the following encodings.
+ */
+#define DW_EH_PE_absptr	0x00
+#define DW_EH_PE_omit	0xff
+#define DW_EH_PE_uleb128	0x01
+#define DW_EH_PE_udata2	0x02
+#define DW_EH_PE_udata4	0x03
+#define DW_EH_PE_udata8	0x04
+#define DW_EH_PE_sleb128	0x09
+#define DW_EH_PE_sdata2	0x0a
+#define DW_EH_PE_sdata4	0x0b
+#define DW_EH_PE_sdata8	0x0c
+#define DW_EH_PE_signed	0x09
+
+#define DW_EH_PE_pcrel	0x10
+
+/*
+ * The architecture-specific register number that contains the return
+ * address in the .debug_frame table.
+ */
+#define DWARF_ARCH_RA_REG	17
+
+/*
+ * At what offset into dwarf_unwind_stack() is DWARF_ARCH_RA_REG setup?
+ */
+#define DWARF_ARCH_UNWIND_OFFSET	0x20
+
+#ifndef __ASSEMBLY__
+/*
+ * Read either the frame pointer (r14) or the stack pointer (r15).
+ * NOTE: this MUST be inlined.
+ */
+static __always_inline unsigned long dwarf_read_arch_reg(unsigned int reg)
+{
+	unsigned long value;
+
+	switch (reg) {
+	case 14:
+		__asm__ __volatile__("mov r14, %0\n" : "=r" (value));
+		break;
+	case 15:
+		__asm__ __volatile__("mov r15, %0\n" : "=r" (value));
+		break;
+	default:
+		BUG();
+	}
+
+	return value;
+}
+
+/**
+ *	dwarf_cie - Common Information Entry
+ */
+struct dwarf_cie {
+	unsigned long length;
+	unsigned long cie_id;
+	unsigned char version;
+	const char *augmentation;
+	unsigned int code_alignment_factor;
+	int data_alignment_factor;
+
+	/* Which column in the rule table represents return addr of func. */
+	unsigned int return_address_reg;
+
+	unsigned char *initial_instructions;
+	unsigned char *instructions_end;
+
+	unsigned char encoding;
+
+	unsigned long cie_pointer;
+
+	struct list_head link;
+
+	unsigned long flags;
+#define DWARF_CIE_Z_AUGMENTATION	(1 << 0)
+};
+
+/**
+ *	dwarf_fde - Frame Description Entry
+ */
+struct dwarf_fde {
+	unsigned long length;
+	unsigned long cie_pointer;
+	struct dwarf_cie *cie;
+	unsigned long initial_location;
+	unsigned long address_range;
+	unsigned char *instructions;
+	unsigned char *end;
+	struct list_head link;
+};
+
+/**
+ *	dwarf_frame - DWARF information for a frame in the call stack
+ */
+struct dwarf_frame {
+	struct dwarf_frame *prev, *next;
+
+	unsigned long pc;
+
+	struct dwarf_reg *regs;
+	unsigned int num_regs;	/* how many regs are allocated? */
+
+	unsigned int depth;	/* what level are we in the callstack? */
+
+	unsigned long cfa;
+
+	/* Valid when DW_FRAME_CFA_REG_OFFSET is set in flags */
+	unsigned int cfa_register;
+	unsigned int cfa_offset;
+
+	/* Valid when DW_FRAME_CFA_REG_EXP is set in flags */
+	unsigned char *cfa_expr;
+	unsigned int cfa_expr_len;
+
+	unsigned long flags;
+#define DWARF_FRAME_CFA_REG_OFFSET	(1 << 0)
+#define DWARF_FRAME_CFA_REG_EXP		(1 << 1)
+
+	unsigned long return_addr;
+};
+
+/**
+ *	dwarf_reg - DWARF register
+ *	@flags: Describes how to calculate the value of this register
+ */
+struct dwarf_reg {
+	unsigned long addr;
+	unsigned long flags;
+#define DWARF_REG_OFFSET	(1 << 0)
+};
+
+/**
+ *	dwarf_stack - a DWARF stack contains a collection of DWARF frames
+ *	@depth: the number of frames in the stack
+ *	@level: an array of DWARF frames, indexed by stack level
+ *
+ */
+struct dwarf_stack {
+	unsigned int depth;
+	struct dwarf_frame **level;
+};
+
+/*
+ * Call Frame instruction opcodes.
+ */
+#define DW_CFA_advance_loc	0x40
+#define DW_CFA_offset		0x80
+#define DW_CFA_restore		0xc0
+#define DW_CFA_nop		0x00
+#define DW_CFA_set_loc		0x01
+#define DW_CFA_advance_loc1	0x02
+#define DW_CFA_advance_loc2	0x03
+#define DW_CFA_advance_loc4	0x04
+#define DW_CFA_offset_extended	0x05
+#define DW_CFA_restore_extended	0x06
+#define DW_CFA_undefined	0x07
+#define DW_CFA_same_value	0x08
+#define DW_CFA_register		0x09
+#define DW_CFA_remember_state	0x0a
+#define DW_CFA_restore_state	0x0b
+#define DW_CFA_def_cfa		0x0c
+#define DW_CFA_def_cfa_register	0x0d
+#define DW_CFA_def_cfa_offset	0x0e
+#define DW_CFA_def_cfa_expression	0x0f
+#define DW_CFA_expression	0x10
+#define DW_CFA_offset_extended_sf	0x11
+#define DW_CFA_def_cfa_sf	0x12
+#define DW_CFA_def_cfa_offset_sf	0x13
+#define DW_CFA_val_offset	0x14
+#define DW_CFA_val_offset_sf	0x15
+#define DW_CFA_val_expression	0x16
+#define DW_CFA_lo_user		0x1c
+#define DW_CFA_hi_user		0x3f
+
+/*
+ * Some call frame instructions encode their operands in the opcode. We
+ * need some helper functions to extract both the opcode and operands
+ * from an instruction.
+ */
+static inline unsigned int DW_CFA_opcode(unsigned long insn)
+{
+	return (insn & 0xc0);
+}
+
+static inline unsigned int DW_CFA_operand(unsigned long insn)
+{
+	return (insn & 0x3f);
+}
+
+#define DW_EH_FRAME_CIE	0		/* .eh_frame CIE IDs are 0 */
+#define DW_CIE_ID	0xffffffff
+#define DW64_CIE_ID	0xffffffffffffffffULL
+
+/*
+ * DWARF FDE/CIE length field values.
+ */
+#define DW_EXT_LO	0xfffffff0
+#define DW_EXT_HI	0xffffffff
+#define DW_EXT_DWARF64	DW_EXT_HI
+
+extern void dwarf_unwinder_init(void);
+
+extern struct dwarf_frame *dwarf_unwind_stack(unsigned long,
+					      struct dwarf_frame *);
+#endif /* __ASSEMBLY__ */
+
+#define CFI_STARTPROC	.cfi_startproc
+#define CFI_ENDPROC	.cfi_endproc
+#define CFI_DEF_CFA	.cfi_def_cfa
+#define CFI_REGISTER	.cfi_register
+#define CFI_REL_OFFSET	.cfi_rel_offset
+
+#else
+
+/*
+ * Use the asm comment character to ignore the rest of the line.
+ */
+#define CFI_IGNORE	!
+
+#define CFI_STARTPROC	CFI_IGNORE
+#define CFI_ENDPROC	CFI_IGNORE
+#define CFI_DEF_CFA	CFI_IGNORE
+#define CFI_REGISTER	CFI_IGNORE
+#define CFI_REL_OFFSET	CFI_IGNORE
+
+#ifndef __ASSEMBLY__
+static inline void dwarf_unwinder_init(void)
+{
+}
+#endif
+
+#endif /* CONFIG_DWARF_UNWINDER */
+
+#endif /* __ASM_SH_DWARF_H */
diff --git a/arch/sh/include/asm/sections.h b/arch/sh/include/asm/sections.h
index 01a4076..a78701d 100644
--- a/arch/sh/include/asm/sections.h
+++ b/arch/sh/include/asm/sections.h
@@ -7,6 +7,7 @@ extern void __nosave_begin, __nosave_end;
 extern long __machvec_start, __machvec_end;
 extern char __uncached_start, __uncached_end;
 extern char _ebss[];
+extern char __start_eh_frame[], __stop_eh_frame[];
 
 #endif /* __ASM_SH_SECTIONS_H */
 
diff --git a/arch/sh/include/asm/vmlinux.lds.h b/arch/sh/include/asm/vmlinux.lds.h
new file mode 100644
index 0000000..244ec4a
--- /dev/null
+++ b/arch/sh/include/asm/vmlinux.lds.h
@@ -0,0 +1,17 @@
+#ifndef __ASM_SH_VMLINUX_LDS_H
+#define __ASM_SH_VMLINUX_LDS_H
+
+#include <asm-generic/vmlinux.lds.h>
+
+#ifdef CONFIG_DWARF_UNWINDER
+#define DWARF_EH_FRAME							\
+	.eh_frame : AT(ADDR(.eh_frame) - LOAD_OFFSET) {			\
+		  VMLINUX_SYMBOL(__start_eh_frame) = .;			\
+		  *(.eh_frame)						\
+		  VMLINUX_SYMBOL(__stop_eh_frame) = .;			\
+	}
+#else
+#define DWARF_EH_FRAME
+#endif
+
+#endif /* __ASM_SH_VMLINUX_LDS_H */
diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32
index 37a3b77..f2245eb 100644
--- a/arch/sh/kernel/Makefile_32
+++ b/arch/sh/kernel/Makefile_32
@@ -33,6 +33,7 @@ obj-$(CONFIG_FTRACE_SYSCALLS)	+= ftrace.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
 obj-$(CONFIG_DUMP_CODE)		+= disassemble.o
 obj-$(CONFIG_HIBERNATION)	+= swsusp.o
+obj-$(CONFIG_DWARF_UNWINDER)	+= dwarf.o
 
 obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)	+= localtimer.o
 
diff --git a/arch/sh/kernel/Makefile_64 b/arch/sh/kernel/Makefile_64
index 00b73e7..639ee51 100644
--- a/arch/sh/kernel/Makefile_64
+++ b/arch/sh/kernel/Makefile_64
@@ -13,6 +13,7 @@ obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-$(CONFIG_IO_TRAPPED)	+= io_trapped.o
 obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
+obj-$(CONFIG_DWARF_UNWINDER)	+= dwarf.o
 
 obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)	+= localtimer.o
 
diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
new file mode 100644
index 0000000..09c6fd7
--- /dev/null
+++ b/arch/sh/kernel/dwarf.c
@@ -0,0 +1,876 @@
+/*
+ * Copyright (C) 2009 Matt Fleming <matt@console-pimps.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * This is an implementation of a DWARF unwinder. Its main purpose is
+ * for generating stacktrace information. Based on the DWARF 3
+ * specification from http://www.dwarfstd.org.
+ *
+ * TODO:
+ *	- DWARF64 doesn't work.
+ */
+
+/* #define DEBUG */
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/mm.h>
+#include <asm/dwarf.h>
+#include <asm/unwinder.h>
+#include <asm/sections.h>
+#include <asm-generic/unaligned.h>
+#include <asm/dwarf.h>
+#include <asm/stacktrace.h>
+
+static LIST_HEAD(dwarf_cie_list);
+DEFINE_SPINLOCK(dwarf_cie_lock);
+
+static LIST_HEAD(dwarf_fde_list);
+DEFINE_SPINLOCK(dwarf_fde_lock);
+
+static struct dwarf_cie *cached_cie;
+
+/*
+ * Figure out whether we need to allocate some dwarf registers. If dwarf
+ * registers have already been allocated then we may need to realloc
+ * them. "reg" is a register number that we need to be able to access
+ * after this call.
+ *
+ * Register numbers start at zero, therefore we need to allocate space
+ * for "reg" + 1 registers.
+ */
+static void dwarf_frame_alloc_regs(struct dwarf_frame *frame,
+				   unsigned int reg)
+{
+	struct dwarf_reg *regs;
+	unsigned int num_regs = reg + 1;
+	size_t new_size;
+	size_t old_size;
+
+	new_size = num_regs * sizeof(*regs);
+	old_size = frame->num_regs * sizeof(*regs);
+
+	/* Fast path: don't allocate any regs if we've already got enough. */
+	if (frame->num_regs >= num_regs)
+		return;
+
+	regs = kzalloc(new_size, GFP_KERNEL);
+	if (!regs) {
+		printk(KERN_WARNING "Unable to allocate DWARF registers\n");
+		/*
+		 * Let's just bomb hard here, we have no way to
+		 * gracefully recover.
+		 */
+		BUG();
+	}
+
+	if (frame->regs) {
+		memcpy(regs, frame->regs, old_size);
+		kfree(frame->regs);
+	}
+
+	frame->regs = regs;
+	frame->num_regs = num_regs;
+}
+
+/**
+ *	dwarf_read_addr - read dwarf data
+ *	@src: source address of data
+ *	@dst: destination address to store the data to
+ *
+ *	Read 'n' bytes from @src, where 'n' is the size of an address on
+ *	the native machine. We return the number of bytes read, which
+ *	should always be 'n'. We also have to be careful when reading
+ *	from @src and writing to @dst, because they can be arbitrarily
+ *	aligned. Return 'n' - the number of bytes read.
+ */
+static inline int dwarf_read_addr(void *src, void *dst)
+{
+	u32 val = __get_unaligned_cpu32(src);
+	__put_unaligned_cpu32(val, dst);
+
+	return sizeof(unsigned long *);
+}
+
+/**
+ *	dwarf_read_uleb128 - read unsigned LEB128 data
+ *	@addr: the address where the ULEB128 data is stored
+ *	@ret: address to store the result
+ *
+ *	Decode an unsigned LEB128 encoded datum. The algorithm is taken
+ *	from Appendix C of the DWARF 3 spec. For information on the
+ *	encodings refer to section "7.6 - Variable Length Data". Return
+ *	the number of bytes read.
+ */
+static inline unsigned long dwarf_read_uleb128(char *addr, unsigned int *ret)
+{
+	unsigned int result;
+	unsigned char byte;
+	int shift, count;
+
+	result = 0;
+	shift = 0;
+	count = 0;
+
+	while (1) {
+		byte = __raw_readb(addr);
+		addr++;
+		count++;
+
+		result |= (byte & 0x7f) << shift;
+		shift += 7;
+
+		if (!(byte & 0x80))
+			break;
+	}
+
+	*ret = result;
+
+	return count;
+}
+
+/**
+ *	dwarf_read_leb128 - read signed LEB128 data
+ *	@addr: the address of the LEB128 encoded data
+ *	@ret: address to store the result
+ *
+ *	Decode signed LEB128 data. The algorithm is taken from Appendix
+ *	C of the DWARF 3 spec. Return the number of bytes read.
+ */
+static inline unsigned long dwarf_read_leb128(char *addr, int *ret)
+{
+	unsigned char byte;
+	int result, shift;
+	int num_bits;
+	int count;
+
+	result = 0;
+	shift = 0;
+	count = 0;
+
+	while (1) {
+		byte = __raw_readb(addr);
+		addr++;
+		result |= (byte & 0x7f) << shift;
+		shift += 7;
+		count++;
+
+		if (!(byte & 0x80))
+			break;
+	}
+
+	/* The number of bits in a signed integer. */
+	num_bits = 8 * sizeof(result);
+
+	if ((shift < num_bits) && (byte & 0x40))
+		result |= (-1 << shift);
+
+	*ret = result;
+
+	return count;
+}
+
+/**
+ *	dwarf_read_encoded_value - return the decoded value at @addr
+ *	@addr: the address of the encoded value
+ *	@val: where to write the decoded value
+ *	@encoding: the encoding with which we can decode @addr
+ *
+ *	GCC emits encoded address in the .eh_frame FDE entries. Decode
+ *	the value at @addr using @encoding. The decoded value is written
+ *	to @val and the number of bytes read is returned.
+ */
+static int dwarf_read_encoded_value(char *addr, unsigned long *val,
+				    char encoding)
+{
+	unsigned long decoded_addr = 0;
+	int count = 0;
+
+	switch (encoding & 0x70) {
+	case DW_EH_PE_absptr:
+		break;
+	case DW_EH_PE_pcrel:
+		decoded_addr = (unsigned long)addr;
+		break;
+	default:
+		pr_debug("encoding=0x%x\n", (encoding & 0x70));
+		BUG();
+	}
+
+	if ((encoding & 0x07) == 0x00)
+		encoding |= DW_EH_PE_udata4;
+
+	switch (encoding & 0x0f) {
+	case DW_EH_PE_sdata4:
+	case DW_EH_PE_udata4:
+		count += 4;
+		decoded_addr += __get_unaligned_cpu32(addr);
+		__raw_writel(decoded_addr, val);
+		break;
+	default:
+		pr_debug("encoding=0x%x\n", encoding);
+		BUG();
+	}
+
+	return count;
+}
+
+/**
+ *	dwarf_entry_len - return the length of an FDE or CIE
+ *	@addr: the address of the entry
+ *	@len: the length of the entry
+ *
+ *	Read the initial_length field of the entry and store the size of
+ *	the entry in @len. We return the number of bytes read. Return a
+ *	count of 0 on error.
+ */
+static inline int dwarf_entry_len(char *addr, unsigned long *len)
+{
+	u32 initial_len;
+	int count;
+
+	initial_len = __get_unaligned_cpu32(addr);
+	count = 4;
+
+	/*
+	 * An initial length field value in the range DW_LEN_EXT_LO -
+	 * DW_LEN_EXT_HI indicates an extension, and should not be
+	 * interpreted as a length. The only extension that we currently
+	 * understand is the use of DWARF64 addresses.
+	 */
+	if (initial_len >= DW_EXT_LO && initial_len <= DW_EXT_HI) {
+		/*
+		 * The 64-bit length field immediately follows the
+		 * compulsory 32-bit length field.
+		 */
+		if (initial_len == DW_EXT_DWARF64) {
+			*len = __get_unaligned_cpu64(addr + 4);
+			count = 12;
+		} else {
+			printk(KERN_WARNING "Unknown DWARF extension\n");
+			count = 0;
+		}
+	} else
+		*len = initial_len;
+
+	return count;
+}
+
+/**
+ *	dwarf_lookup_cie - locate the cie
+ *	@cie_ptr: pointer to help with lookup
+ */
+static struct dwarf_cie *dwarf_lookup_cie(unsigned long cie_ptr)
+{
+	struct dwarf_cie *cie, *n;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dwarf_cie_lock, flags);
+
+	/*
+	 * We've cached the last CIE we looked up because chances are
+	 * that the FDE wants this CIE.
+	 */
+	if (cached_cie && cached_cie->cie_pointer == cie_ptr) {
+		cie = cached_cie;
+		goto out;
+	}
+
+	list_for_each_entry_safe(cie, n, &dwarf_cie_list, link) {
+		if (cie->cie_pointer == cie_ptr) {
+			cached_cie = cie;
+			break;
+		}
+	}
+
+	/* Couldn't find the entry in the list. */
+	if (&cie->link == &dwarf_cie_list)
+		cie = NULL;
+out:
+	spin_unlock_irqrestore(&dwarf_cie_lock, flags);
+	return cie;
+}
+
+/**
+ *	dwarf_lookup_fde - locate the FDE that covers pc
+ *	@pc: the program counter
+ */
+struct dwarf_fde *dwarf_lookup_fde(unsigned long pc)
+{
+	unsigned long flags;
+	struct dwarf_fde *fde, *n;
+
+	spin_lock_irqsave(&dwarf_fde_lock, flags);
+	list_for_each_entry_safe(fde, n, &dwarf_fde_list, link) {
+		unsigned long start, end;
+
+		start = fde->initial_location;
+		end = fde->initial_location + fde->address_range;
+
+		if (pc >= start && pc < end)
+			break;
+	}
+
+	/* Couldn't find the entry in the list. */
+	if (&fde->link == &dwarf_fde_list)
+		fde = NULL;
+
+	spin_unlock_irqrestore(&dwarf_fde_lock, flags);
+
+	return fde;
+}
+
+/**
+ *	dwarf_cfa_execute_insns - execute instructions to calculate a CFA
+ *	@insn_start: address of the first instruction
+ *	@insn_end: address of the last instruction
+ *	@cie: the CIE for this function
+ *	@fde: the FDE for this function
+ *	@frame: the instructions calculate the CFA for this frame
+ *	@pc: the program counter of the address we're interested in
+ *
+ *	Execute the Call Frame instruction sequence starting at
+ *	@insn_start and ending at @insn_end. The instructions describe
+ *	how to calculate the Canonical Frame Address of a stackframe.
+ *	Store the results in @frame.
+ */
+static int dwarf_cfa_execute_insns(unsigned char *insn_start,
+				   unsigned char *insn_end,
+				   struct dwarf_cie *cie,
+				   struct dwarf_fde *fde,
+				   struct dwarf_frame *frame,
+				   unsigned long pc)
+{
+	unsigned char insn;
+	unsigned char *current_insn;
+	unsigned int count, delta, reg, expr_len, offset;
+
+	current_insn = insn_start;
+
+	while (current_insn < insn_end && frame->pc <= pc) {
+		insn = __raw_readb(current_insn++);
+
+		/*
+		 * Firstly, handle the opcodes that embed their operands
+		 * in the instructions.
+		 */
+		switch (DW_CFA_opcode(insn)) {
+		case DW_CFA_advance_loc:
+			delta = DW_CFA_operand(insn);
+			delta *= cie->code_alignment_factor;
+			frame->pc += delta;
+			continue;
+			/* NOTREACHED */
+		case DW_CFA_offset:
+			reg = DW_CFA_operand(insn);
+			count = dwarf_read_uleb128(current_insn, &offset);
+			current_insn += count;
+			offset *= cie->data_alignment_factor;
+			dwarf_frame_alloc_regs(frame, reg);
+			frame->regs[reg].addr = offset;
+			frame->regs[reg].flags |= DWARF_REG_OFFSET;
+			continue;
+			/* NOTREACHED */
+		case DW_CFA_restore:
+			reg = DW_CFA_operand(insn);
+			continue;
+			/* NOTREACHED */
+		}
+
+		/*
+		 * Secondly, handle the opcodes that don't embed their
+		 * operands in the instruction.
+		 */
+		switch (insn) {
+		case DW_CFA_nop:
+			continue;
+		case DW_CFA_advance_loc1:
+			delta = *current_insn++;
+			frame->pc += delta * cie->code_alignment_factor;
+			break;
+		case DW_CFA_advance_loc2:
+			delta = __get_unaligned_cpu16(current_insn);
+			current_insn += 2;
+			frame->pc += delta * cie->code_alignment_factor;
+			break;
+		case DW_CFA_advance_loc4:
+			delta = __get_unaligned_cpu32(current_insn);
+			current_insn += 4;
+			frame->pc += delta * cie->code_alignment_factor;
+			break;
+		case DW_CFA_offset_extended:
+			count = dwarf_read_uleb128(current_insn, &reg);
+			current_insn += count;
+			count = dwarf_read_uleb128(current_insn, &offset);
+			current_insn += count;
+			offset *= cie->data_alignment_factor;
+			break;
+		case DW_CFA_restore_extended:
+			count = dwarf_read_uleb128(current_insn, &reg);
+			current_insn += count;
+			break;
+		case DW_CFA_undefined:
+			count = dwarf_read_uleb128(current_insn, &reg);
+			current_insn += count;
+			break;
+		case DW_CFA_def_cfa:
+			count = dwarf_read_uleb128(current_insn,
+						   &frame->cfa_register);
+			current_insn += count;
+			count = dwarf_read_uleb128(current_insn,
+						   &frame->cfa_offset);
+			current_insn += count;
+
+			frame->flags |= DWARF_FRAME_CFA_REG_OFFSET;
+			break;
+		case DW_CFA_def_cfa_register:
+			count = dwarf_read_uleb128(current_insn,
+						   &frame->cfa_register);
+			current_insn += count;
+			frame->flags |= DWARF_FRAME_CFA_REG_OFFSET;
+			break;
+		case DW_CFA_def_cfa_offset:
+			count = dwarf_read_uleb128(current_insn, &offset);
+			current_insn += count;
+			frame->cfa_offset = offset;
+			break;
+		case DW_CFA_def_cfa_expression:
+			count = dwarf_read_uleb128(current_insn, &expr_len);
+			current_insn += count;
+
+			frame->cfa_expr = current_insn;
+			frame->cfa_expr_len = expr_len;
+			current_insn += expr_len;
+
+			frame->flags |= DWARF_FRAME_CFA_REG_EXP;
+			break;
+		case DW_CFA_offset_extended_sf:
+			count = dwarf_read_uleb128(current_insn, &reg);
+			current_insn += count;
+			count = dwarf_read_leb128(current_insn, &offset);
+			current_insn += count;
+			offset *= cie->data_alignment_factor;
+			dwarf_frame_alloc_regs(frame, reg);
+			frame->regs[reg].flags |= DWARF_REG_OFFSET;
+			frame->regs[reg].addr = offset;
+			break;
+		case DW_CFA_val_offset:
+			count = dwarf_read_uleb128(current_insn, &reg);
+			current_insn += count;
+			count = dwarf_read_leb128(current_insn, &offset);
+			offset *= cie->data_alignment_factor;
+			frame->regs[reg].flags |= DWARF_REG_OFFSET;
+			frame->regs[reg].addr = offset;
+			break;
+		default:
+			pr_debug("unhandled DWARF instruction 0x%x\n", insn);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ *	dwarf_unwind_stack - recursively unwind the stack
+ *	@pc: address of the function to unwind
+ *	@prev: struct dwarf_frame of the previous stackframe on the callstack
+ *
+ *	Return a struct dwarf_frame representing the most recent frame
+ *	on the callstack. Each of the lower (older) stack frames are
+ *	linked via the "prev" member.
+ */
+struct dwarf_frame *dwarf_unwind_stack(unsigned long pc,
+				       struct dwarf_frame *prev)
+{
+	struct dwarf_frame *frame;
+	struct dwarf_cie *cie;
+	struct dwarf_fde *fde;
+	unsigned long addr;
+	int i, offset;
+
+	/*
+	 * If this is the first invocation of this recursive function we
+	 * need get the contents of a physical register to get the CFA
+	 * in order to begin the virtual unwinding of the stack.
+	 *
+	 * The constant DWARF_ARCH_UNWIND_OFFSET is added to the address of
+	 * this function because the return address register
+	 * (DWARF_ARCH_RA_REG) will probably not be initialised until a
+	 * few instructions into the prologue.
+	 */
+	if (!pc && !prev) {
+		pc = (unsigned long)&dwarf_unwind_stack;
+		pc += DWARF_ARCH_UNWIND_OFFSET;
+	}
+
+	frame = kzalloc(sizeof(*frame), GFP_KERNEL);
+	if (!frame)
+		return NULL;
+
+	frame->prev = prev;
+
+	fde = dwarf_lookup_fde(pc);
+	if (!fde) {
+		/*
+		 * This is our normal exit path - the one that stops the
+		 * recursion. There's two reasons why we might exit
+		 * here,
+		 *
+		 *	a) pc has no asscociated DWARF frame info and so
+		 *	we don't know how to unwind this frame. This is
+		 *	usually the case when we're trying to unwind a
+		 *	frame that was called from some assembly code
+		 *	that has no DWARF info, e.g. syscalls.
+		 *
+		 *	b) the DEBUG info for pc is bogus. There's
+		 *	really no way to distinguish this case from the
+		 *	case above, which sucks because we could print a
+		 *	warning here.
+		 */
+		return NULL;
+	}
+
+	cie = dwarf_lookup_cie(fde->cie_pointer);
+
+	frame->pc = fde->initial_location;
+
+	/* CIE initial instructions */
+	dwarf_cfa_execute_insns(cie->initial_instructions,
+				cie->instructions_end, cie, fde, frame, pc);
+
+	/* FDE instructions */
+	dwarf_cfa_execute_insns(fde->instructions, fde->end, cie,
+				fde, frame, pc);
+
+	/* Calculate the CFA */
+	switch (frame->flags) {
+	case DWARF_FRAME_CFA_REG_OFFSET:
+		if (prev) {
+			BUG_ON(!prev->regs[frame->cfa_register].flags);
+
+			addr = prev->cfa;
+			addr += prev->regs[frame->cfa_register].addr;
+			frame->cfa = __raw_readl(addr);
+
+		} else {
+			/*
+			 * Again, this is the first invocation of this
+			 * recurisve function. We need to physically
+			 * read the contents of a register in order to
+			 * get the Canonical Frame Address for this
+			 * function.
+			 */
+			frame->cfa = dwarf_read_arch_reg(frame->cfa_register);
+		}
+
+		frame->cfa += frame->cfa_offset;
+		break;
+	default:
+		BUG();
+	}
+
+	/* If we haven't seen the return address reg, we're screwed. */
+	BUG_ON(!frame->regs[DWARF_ARCH_RA_REG].flags);
+
+	for (i = 0; i <= frame->num_regs; i++) {
+		struct dwarf_reg *reg = &frame->regs[i];
+
+		if (!reg->flags)
+			continue;
+
+		offset = reg->addr;
+		offset += frame->cfa;
+	}
+
+	addr = frame->cfa + frame->regs[DWARF_ARCH_RA_REG].addr;
+	frame->return_addr = __raw_readl(addr);
+
+	frame->next = dwarf_unwind_stack(frame->return_addr, frame);
+	return frame;
+}
+
+static int dwarf_parse_cie(void *entry, void *p, unsigned long len,
+			   unsigned char *end)
+{
+	struct dwarf_cie *cie;
+	unsigned long flags;
+	int count;
+
+	cie = kzalloc(sizeof(*cie), GFP_KERNEL);
+	if (!cie)
+		return -ENOMEM;
+
+	cie->length = len;
+
+	/*
+	 * Record the offset into the .eh_frame section
+	 * for this CIE. It allows this CIE to be
+	 * quickly and easily looked up from the
+	 * corresponding FDE.
+	 */
+	cie->cie_pointer = (unsigned long)entry;
+
+	cie->version = *(char *)p++;
+	BUG_ON(cie->version != 1);
+
+	cie->augmentation = p;
+	p += strlen(cie->augmentation) + 1;
+
+	count = dwarf_read_uleb128(p, &cie->code_alignment_factor);
+	p += count;
+
+	count = dwarf_read_leb128(p, &cie->data_alignment_factor);
+	p += count;
+
+	/*
+	 * Which column in the rule table contains the
+	 * return address?
+	 */
+	if (cie->version == 1) {
+		cie->return_address_reg = __raw_readb(p);
+		p++;
+	} else {
+		count = dwarf_read_uleb128(p, &cie->return_address_reg);
+		p += count;
+	}
+
+	if (cie->augmentation[0] == 'z') {
+		unsigned int length, count;
+		cie->flags |= DWARF_CIE_Z_AUGMENTATION;
+
+		count = dwarf_read_uleb128(p, &length);
+		p += count;
+
+		BUG_ON((unsigned char *)p > end);
+
+		cie->initial_instructions = p + length;
+		cie->augmentation++;
+	}
+
+	while (*cie->augmentation) {
+		/*
+		 * "L" indicates a byte showing how the
+		 * LSDA pointer is encoded. Skip it.
+		 */
+		if (*cie->augmentation == 'L') {
+			p++;
+			cie->augmentation++;
+		} else if (*cie->augmentation == 'R') {
+			/*
+			 * "R" indicates a byte showing
+			 * how FDE addresses are
+			 * encoded.
+			 */
+			cie->encoding = *(char *)p++;
+			cie->augmentation++;
+		} else if (*cie->augmentation == 'P') {
+			/*
+			 * "R" indicates a personality
+			 * routine in the CIE
+			 * augmentation.
+			 */
+			BUG();
+		} else if (*cie->augmentation == 'S') {
+			BUG();
+		} else {
+			/*
+			 * Unknown augmentation. Assume
+			 * 'z' augmentation.
+			 */
+			p = cie->initial_instructions;
+			BUG_ON(!p);
+			break;
+		}
+	}
+
+	cie->initial_instructions = p;
+	cie->instructions_end = end;
+
+	/* Add to list */
+	spin_lock_irqsave(&dwarf_cie_lock, flags);
+	list_add_tail(&cie->link, &dwarf_cie_list);
+	spin_unlock_irqrestore(&dwarf_cie_lock, flags);
+
+	return 0;
+}
+
+static int dwarf_parse_fde(void *entry, u32 entry_type,
+			   void *start, unsigned long len)
+{
+	struct dwarf_fde *fde;
+	struct dwarf_cie *cie;
+	unsigned long flags;
+	int count;
+	void *p = start;
+
+	fde = kzalloc(sizeof(*fde), GFP_KERNEL);
+	if (!fde)
+		return -ENOMEM;
+
+	fde->length = len;
+
+	/*
+	 * In a .eh_frame section the CIE pointer is the
+	 * delta between the address within the FDE
+	 */
+	fde->cie_pointer = (unsigned long)(p - entry_type - 4);
+
+	cie = dwarf_lookup_cie(fde->cie_pointer);
+	fde->cie = cie;
+
+	if (cie->encoding)
+		count = dwarf_read_encoded_value(p, &fde->initial_location,
+						 cie->encoding);
+	else
+		count = dwarf_read_addr(p, &fde->initial_location);
+
+	p += count;
+
+	if (cie->encoding)
+		count = dwarf_read_encoded_value(p, &fde->address_range,
+						 cie->encoding & 0x0f);
+	else
+		count = dwarf_read_addr(p, &fde->address_range);
+
+	p += count;
+
+	if (fde->cie->flags & DWARF_CIE_Z_AUGMENTATION) {
+		unsigned int length;
+		count = dwarf_read_uleb128(p, &length);
+		p += count + length;
+	}
+
+	/* Call frame instructions. */
+	fde->instructions = p;
+	fde->end = start + len;
+
+	/* Add to list. */
+	spin_lock_irqsave(&dwarf_fde_lock, flags);
+	list_add_tail(&fde->link, &dwarf_fde_list);
+	spin_unlock_irqrestore(&dwarf_fde_lock, flags);
+
+	return 0;
+}
+
+static void dwarf_unwinder_dump(struct task_struct *task, struct pt_regs *regs,
+				unsigned long *sp,
+				const struct stacktrace_ops *ops, void *data)
+{
+	struct dwarf_frame *frame;
+
+	frame = dwarf_unwind_stack(0, NULL);
+
+	while (frame && frame->return_addr) {
+		ops->address(data, frame->return_addr, 1);
+		frame = frame->next;
+	}
+}
+
+static struct unwinder dwarf_unwinder = {
+	.name = "dwarf-unwinder",
+	.dump = dwarf_unwinder_dump,
+	.rating = 150,
+};
+
+static void dwarf_unwinder_cleanup(void)
+{
+	struct dwarf_cie *cie, *m;
+	struct dwarf_fde *fde, *n;
+	unsigned long flags;
+
+	/*
+	 * Deallocate all the memory allocated for the DWARF unwinder.
+	 * Traverse all the FDE/CIE lists and remove and free all the
+	 * memory associated with those data structures.
+	 */
+	spin_lock_irqsave(&dwarf_cie_lock, flags);
+	list_for_each_entry_safe(cie, m, &dwarf_cie_list, link)
+		kfree(cie);
+	spin_unlock_irqrestore(&dwarf_cie_lock, flags);
+
+	spin_lock_irqsave(&dwarf_fde_lock, flags);
+	list_for_each_entry_safe(fde, n, &dwarf_fde_list, link)
+		kfree(fde);
+	spin_unlock_irqrestore(&dwarf_fde_lock, flags);
+}
+
+/**
+ *	dwarf_unwinder_init - initialise the dwarf unwinder
+ *
+ *	Build the data structures describing the .dwarf_frame section to
+ *	make it easier to lookup CIE and FDE entries. Because the
+ *	.eh_frame section is packed as tightly as possible it is not
+ *	easy to lookup the FDE for a given PC, so we build a list of FDE
+ *	and CIE entries that make it easier.
+ */
+void dwarf_unwinder_init(void)
+{
+	u32 entry_type;
+	void *p, *entry;
+	int count, err;
+	unsigned long len;
+	unsigned int c_entries, f_entries;
+	unsigned char *end;
+	INIT_LIST_HEAD(&dwarf_cie_list);
+	INIT_LIST_HEAD(&dwarf_fde_list);
+
+	c_entries = 0;
+	f_entries = 0;
+	entry = &__start_eh_frame;
+
+	while ((char *)entry < __stop_eh_frame) {
+		p = entry;
+
+		count = dwarf_entry_len(p, &len);
+		if (count == 0) {
+			/*
+			 * We read a bogus length field value. There is
+			 * nothing we can do here apart from disabling
+			 * the DWARF unwinder. We can't even skip this
+			 * entry and move to the next one because 'len'
+			 * tells us where our next entry is.
+			 */
+			goto out;
+		} else
+			p += count;
+
+		/* initial length does not include itself */
+		end = p + len;
+
+		entry_type = __get_unaligned_cpu32(p);
+		p += 4;
+
+		if (entry_type == DW_EH_FRAME_CIE) {
+			err = dwarf_parse_cie(entry, p, len, end);
+			if (err < 0)
+				goto out;
+			else
+				c_entries++;
+		} else {
+			err = dwarf_parse_fde(entry, entry_type, p, len);
+			if (err < 0)
+				goto out;
+			else
+				f_entries++;
+		}
+
+		entry = (char *)entry + len + 4;
+	}
+
+	printk(KERN_INFO "DWARF unwinder initialised: read %u CIEs, %u FDEs\n",
+	       c_entries, f_entries);
+
+	err = unwinder_register(&dwarf_unwinder);
+	if (err)
+		goto out;
+
+	return;
+
+out:
+	printk(KERN_ERR "Failed to initialise DWARF unwinder: %d\n", err);
+	dwarf_unwinder_cleanup();
+}
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 278c68c..2bb43dc 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -14,6 +14,7 @@
 #include <asm/processor.h>
 #include <asm/machvec.h>
 #include <asm/uaccess.h>
+#include <asm/dwarf.h>
 #include <asm/thread_info.h>
 #include <cpu/mmu_context.h>
 
@@ -261,6 +262,9 @@ void __init init_IRQ(void)
 		sh_mv.mv_init_irq();
 
 	irq_ctx_init(smp_processor_id());
+
+	/* This needs to be early, but not too early.. */
+	dwarf_unwinder_init();
 }
 
 #ifdef CONFIG_SPARSE_IRQ
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index 80dc9f8..1b7d9d5 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -12,7 +12,7 @@ OUTPUT_ARCH(sh)
 
 #include <asm/thread_info.h>
 #include <asm/cache.h>
-#include <asm-generic/vmlinux.lds.h>
+#include <asm/vmlinux.lds.h>
 
 ENTRY(_start)
 SECTIONS
@@ -70,6 +70,8 @@ SECTIONS
 
 	_edata = .;			/* End of data section */
 
+	DWARF_EH_FRAME
+
 	. = ALIGN(PAGE_SIZE);		/* Init code and data */
 	__init_begin = .;
 	INIT_TEXT_SECTION(PAGE_SIZE)
-- 
cgit v1.1


From 0b930489b8606224b829c8a6037eac24249a97ec Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Sun, 2 Aug 2009 22:33:26 +0100
Subject: sh: Setup the frame register in asm code

In order to use DWARF unwinder info the frame register has to contain a
valid value. Whilst GCC takes care of this for C code, we have to do it
ourselves for assembly.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/entry-macros.S | 12 ++++++++++++
 arch/sh/kernel/cpu/sh3/entry.S     |  1 +
 arch/sh/kernel/entry-common.S      |  1 +
 3 files changed, 14 insertions(+)

(limited to 'arch/sh')

diff --git a/arch/sh/include/asm/entry-macros.S b/arch/sh/include/asm/entry-macros.S
index 1bdd938..64fd0de 100644
--- a/arch/sh/include/asm/entry-macros.S
+++ b/arch/sh/include/asm/entry-macros.S
@@ -108,3 +108,15 @@
 #else
 # define PREF(x)	nop
 #endif
+
+	/*
+	 * Macro for use within assembly. Because the DWARF unwinder
+	 * needs to use the frame register to unwind the stack, we
+	 * need to setup r14 with the value of the stack pointer as
+	 * the return address is usually on the stack somewhere.
+	 */
+	.macro	setup_frame_reg
+#ifdef CONFIG_DWARF_UNWINDER
+	mov	r15, r14
+#endif
+	.endm
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index 3cb531f..67ad646 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -137,6 +137,7 @@ ENTRY(tlb_protection_violation_store)
 	 mov	#1, r5
 
 call_dpf:
+	setup_frame_reg
 	mov.l	1f, r0
 	mov	r5, r8
 	mov.l	@r0, r6
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index fc26ccd..b3b215f 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -285,6 +285,7 @@ ret_from_fork:
  * system calls and debug traps through their respective jump tables.
  */
 ENTRY(system_call)
+	setup_frame_reg
 #if !defined(CONFIG_CPU_SH2)
 	mov.l	1f, r9
 	mov.l	@r9, r8		! Read from TRA (Trap Address) Register
-- 
cgit v1.1


From cafb0ddac60556f7d2d4cd0ef1a93da8a6c71ffb Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Sun, 2 Aug 2009 22:40:11 +0100
Subject: sh: Add CFI annotations for exception return.

Annotate various assembly code paths with CFI assembler directives so
that DWARF unwind info is available for the unwinder.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/entry-common.S | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index b3b215f..e63178f 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -43,6 +43,7 @@
  *	syscall #
  *
  */
+#include <asm/dwarf.h>
 
 #if defined(CONFIG_PREEMPT)
 #  define preempt_stop()	cli ; TRACE_IRQS_OFF
@@ -66,6 +67,11 @@ ENTRY(exception_error)
 
 	.align	2
 ret_from_exception:
+	CFI_STARTPROC simple
+	CFI_DEF_CFA r14, 0
+	CFI_REL_OFFSET 17, 64
+	CFI_REL_OFFSET 15, 0
+	CFI_REL_OFFSET 14, 56
 	preempt_stop()
 ENTRY(ret_from_irq)
 	!
@@ -240,6 +246,7 @@ debug_trap:
 	 nop
 	bra	__restore_all
 	 nop
+	CFI_ENDPROC
 
 	.align	2
 1:	.long	debug_trap_table
-- 
cgit v1.1


From 3497447f15485b479366ec86effaac16fc82411b Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 14 Aug 2009 02:10:59 +0900
Subject: sh: unwinder: Fix up usage of unaligned accessors.

This was using internal symbols for unaligned accesses, bypassing the
exposed interface for variable sized safe accesses. This converts all of
the __get_unaligned_cpuXX() users over to get_unaligned() directly,
relying on the cast to select the proper internal routine.

Additionally, the __put_unaligned_cpuXX() case is superfluous given that
the destination address is aligned in all of the current cases, so just
drop that outright.

Furthermore, this switches to the asm/unaligned.h header instead of the
asm-generic version, which was silently bypassing the SH-4A optimized
unaligned ops.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/dwarf.c | 20 +++++++++-----------
 1 file changed, 9 insertions(+), 11 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index 09c6fd7..d1d8536 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -21,7 +21,7 @@
 #include <asm/dwarf.h>
 #include <asm/unwinder.h>
 #include <asm/sections.h>
-#include <asm-generic/unaligned.h>
+#include <asm/unaligned.h>
 #include <asm/dwarf.h>
 #include <asm/stacktrace.h>
 
@@ -87,11 +87,9 @@ static void dwarf_frame_alloc_regs(struct dwarf_frame *frame,
  *	from @src and writing to @dst, because they can be arbitrarily
  *	aligned. Return 'n' - the number of bytes read.
  */
-static inline int dwarf_read_addr(void *src, void *dst)
+static inline int dwarf_read_addr(unsigned long *src, unsigned long *dst)
 {
-	u32 val = __get_unaligned_cpu32(src);
-	__put_unaligned_cpu32(val, dst);
-
+	*dst = get_unaligned(src);
 	return sizeof(unsigned long *);
 }
 
@@ -207,7 +205,7 @@ static int dwarf_read_encoded_value(char *addr, unsigned long *val,
 	case DW_EH_PE_sdata4:
 	case DW_EH_PE_udata4:
 		count += 4;
-		decoded_addr += __get_unaligned_cpu32(addr);
+		decoded_addr += get_unaligned((u32 *)addr);
 		__raw_writel(decoded_addr, val);
 		break;
 	default:
@@ -232,7 +230,7 @@ static inline int dwarf_entry_len(char *addr, unsigned long *len)
 	u32 initial_len;
 	int count;
 
-	initial_len = __get_unaligned_cpu32(addr);
+	initial_len = get_unaligned((u32 *)addr);
 	count = 4;
 
 	/*
@@ -247,7 +245,7 @@ static inline int dwarf_entry_len(char *addr, unsigned long *len)
 		 * compulsory 32-bit length field.
 		 */
 		if (initial_len == DW_EXT_DWARF64) {
-			*len = __get_unaligned_cpu64(addr + 4);
+			*len = get_unaligned((u64 *)addr + 4);
 			count = 12;
 		} else {
 			printk(KERN_WARNING "Unknown DWARF extension\n");
@@ -392,12 +390,12 @@ static int dwarf_cfa_execute_insns(unsigned char *insn_start,
 			frame->pc += delta * cie->code_alignment_factor;
 			break;
 		case DW_CFA_advance_loc2:
-			delta = __get_unaligned_cpu16(current_insn);
+			delta = get_unaligned((u16 *)current_insn);
 			current_insn += 2;
 			frame->pc += delta * cie->code_alignment_factor;
 			break;
 		case DW_CFA_advance_loc4:
-			delta = __get_unaligned_cpu32(current_insn);
+			delta = get_unaligned((u32 *)current_insn);
 			current_insn += 4;
 			frame->pc += delta * cie->code_alignment_factor;
 			break;
@@ -841,7 +839,7 @@ void dwarf_unwinder_init(void)
 		/* initial length does not include itself */
 		end = p + len;
 
-		entry_type = __get_unaligned_cpu32(p);
+		entry_type = get_unaligned((u32 *)p);
 		p += 4;
 
 		if (entry_type == DW_EH_FRAME_CIE) {
-- 
cgit v1.1


From bf43a160ff2d67a21b076286bab6f5e2c993bd0a Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 14 Aug 2009 03:06:13 +0900
Subject: sh: unwinder: Restore put_unaligned() for an unaligned destination.

The destination address might be unaligned, so set it with
put_unaligned() for safety. This restores the previous behaviour, albeit
through the proper API.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/dwarf.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index d1d8536..49d039f 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -89,7 +89,8 @@ static void dwarf_frame_alloc_regs(struct dwarf_frame *frame,
  */
 static inline int dwarf_read_addr(unsigned long *src, unsigned long *dst)
 {
-	*dst = get_unaligned(src);
+	u32 val = get_unaligned(src);
+	put_unaligned(val, dst);
 	return sizeof(unsigned long *);
 }
 
-- 
cgit v1.1


From f54aab4a7486fb7947d6d746f3423f67676811c8 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 14 Aug 2009 04:59:50 +0900
Subject: sh: oprofile: Kill off dead valid_kernel_stack().

This is no longer used, kill it off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/oprofile/backtrace.c | 27 ---------------------------
 1 file changed, 27 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/oprofile/backtrace.c b/arch/sh/oprofile/backtrace.c
index 37cd75d..2bc74de 100644
--- a/arch/sh/oprofile/backtrace.c
+++ b/arch/sh/oprofile/backtrace.c
@@ -81,33 +81,6 @@ user_backtrace(unsigned long *stackaddr, struct pt_regs *regs)
 	return stackaddr;
 }
 
-/*
- * |             | /\ Higher addresses
- * |             |
- * --------------- stack base (address of current_thread_info)
- * | thread info |
- * .             .
- * |    stack    |
- * --------------- saved regs->regs[15] value if valid
- * .             .
- * --------------- struct pt_regs stored on stack (struct pt_regs *)
- * |             |
- * .             .
- * |             |
- * --------------- ???
- * |             |
- * |             | \/ Lower addresses
- *
- * Thus, &pt_regs <-> stack base restricts the valid(ish) fp values
- */
-static int valid_kernel_stack(unsigned long *stackaddr, struct pt_regs *regs)
-{
-	unsigned long stack = (unsigned long)regs;
-	unsigned long stack_base = (stack & ~(THREAD_SIZE - 1)) + THREAD_SIZE;
-
-	return ((unsigned long)stackaddr > stack) && ((unsigned long)stackaddr < stack_base);
-}
-
 void sh_backtrace(struct pt_regs * const regs, unsigned int depth)
 {
 	unsigned long *stackaddr;
-- 
cgit v1.1


From f826466772ae52f26152287fcb2259351de78f0f Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Thu, 13 Aug 2009 20:41:31 +0100
Subject: sh: Delete DWARF_ARCH_UNWIND_OFFSET

Trying to figure out the best value for DWARF_ARCH_UNWIND_OFFSET is
tricky at best. Various things can change the size (and offset from the
beginning of the function) of the prologue. Notably, turning on ftrace
adds calls to mcount at the beginning of functions, thereby pushing the
prologue further into the function.

So replace DWARF_ARCH_UNWIND_OFFSET with some code that continues to
execute CFA instructions until the value of return address register is
defined. This is safe to do because we know that the return address must
have been pushed onto the frame before our first function call; we just
can't figure out where at compile-time.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/dwarf.h |  5 -----
 arch/sh/kernel/dwarf.c      | 44 +++++++++++++++++++++++++++++++++++---------
 2 files changed, 35 insertions(+), 14 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/include/asm/dwarf.h b/arch/sh/include/asm/dwarf.h
index 23eba12..60b1807 100644
--- a/arch/sh/include/asm/dwarf.h
+++ b/arch/sh/include/asm/dwarf.h
@@ -193,11 +193,6 @@
  */
 #define DWARF_ARCH_RA_REG	17
 
-/*
- * At what offset into dwarf_unwind_stack() is DWARF_ARCH_RA_REG setup?
- */
-#define DWARF_ARCH_UNWIND_OFFSET	0x20
-
 #ifndef __ASSEMBLY__
 /*
  * Read either the frame pointer (r14) or the stack pointer (r15).
diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index 49d039f..83f3cc9 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -330,6 +330,7 @@ struct dwarf_fde *dwarf_lookup_fde(unsigned long pc)
  *	@fde: the FDE for this function
  *	@frame: the instructions calculate the CFA for this frame
  *	@pc: the program counter of the address we're interested in
+ *	@define_ra: keep executing insns until the return addr reg is defined?
  *
  *	Execute the Call Frame instruction sequence starting at
  *	@insn_start and ending at @insn_end. The instructions describe
@@ -341,17 +342,36 @@ static int dwarf_cfa_execute_insns(unsigned char *insn_start,
 				   struct dwarf_cie *cie,
 				   struct dwarf_fde *fde,
 				   struct dwarf_frame *frame,
-				   unsigned long pc)
+				   unsigned long pc,
+				   bool define_ra)
 {
 	unsigned char insn;
 	unsigned char *current_insn;
 	unsigned int count, delta, reg, expr_len, offset;
+	bool seen_ra_reg;
 
 	current_insn = insn_start;
 
-	while (current_insn < insn_end && frame->pc <= pc) {
+	/*
+	 * If we're executing instructions for the dwarf_unwind_stack()
+	 * FDE we need to keep executing instructions until the value of
+	 * DWARF_ARCH_RA_REG is defined. See the comment in
+	 * dwarf_unwind_stack() for more details.
+	 */
+	if (define_ra)
+		seen_ra_reg = false;
+	else
+		seen_ra_reg = true;
+
+	while (current_insn < insn_end && (frame->pc <= pc || !seen_ra_reg) ) {
 		insn = __raw_readb(current_insn++);
 
+		if (!seen_ra_reg) {
+			if (frame->num_regs >= DWARF_ARCH_RA_REG &&
+			    frame->regs[DWARF_ARCH_RA_REG].flags)
+				seen_ra_reg = true;
+		}
+
 		/*
 		 * Firstly, handle the opcodes that embed their operands
 		 * in the instructions.
@@ -490,20 +510,25 @@ struct dwarf_frame *dwarf_unwind_stack(unsigned long pc,
 	struct dwarf_fde *fde;
 	unsigned long addr;
 	int i, offset;
+	bool define_ra = false;
 
 	/*
 	 * If this is the first invocation of this recursive function we
 	 * need get the contents of a physical register to get the CFA
 	 * in order to begin the virtual unwinding of the stack.
 	 *
-	 * The constant DWARF_ARCH_UNWIND_OFFSET is added to the address of
-	 * this function because the return address register
-	 * (DWARF_ARCH_RA_REG) will probably not be initialised until a
-	 * few instructions into the prologue.
+	 * Setting "define_ra" to true indictates that we want
+	 * dwarf_cfa_execute_insns() to continue executing instructions
+	 * until we know how to calculate the value of DWARF_ARCH_RA_REG
+	 * (which we need in order to kick off the whole unwinding
+	 * process).
+	 *
+	 * NOTE: the return address is guaranteed to be setup by the
+	 * time this function makes its first function call.
 	 */
 	if (!pc && !prev) {
 		pc = (unsigned long)&dwarf_unwind_stack;
-		pc += DWARF_ARCH_UNWIND_OFFSET;
+		define_ra = true;
 	}
 
 	frame = kzalloc(sizeof(*frame), GFP_KERNEL);
@@ -539,11 +564,12 @@ struct dwarf_frame *dwarf_unwind_stack(unsigned long pc,
 
 	/* CIE initial instructions */
 	dwarf_cfa_execute_insns(cie->initial_instructions,
-				cie->instructions_end, cie, fde, frame, pc);
+				cie->instructions_end, cie, fde,
+				frame, pc, false);
 
 	/* FDE instructions */
 	dwarf_cfa_execute_insns(fde->instructions, fde->end, cie,
-				fde, frame, pc);
+				fde, frame, pc, define_ra);
 
 	/* Calculate the CFA */
 	switch (frame->flags) {
-- 
cgit v1.1


From 0fc11e3618bb1f9e0640127ec84f5d2690fa3894 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 14 Aug 2009 23:58:37 +0900
Subject: sh: unwinder: Convert frame allocations to GFP_ATOMIC.

save_stack_trace_tsk() and friends can be called from atomic context (as
triggered by latencytop), and subsequently hit two problematic allocation
points that were using GFP_KERNEL (these were dwarf_unwind_stack() and
dwarf_frame_alloc_regs()). Convert these over to GFP_ATOMIC and get
latencytop working with the DWARF unwinder.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/dwarf.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index 83f3cc9..db02136 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -57,7 +57,7 @@ static void dwarf_frame_alloc_regs(struct dwarf_frame *frame,
 	if (frame->num_regs >= num_regs)
 		return;
 
-	regs = kzalloc(new_size, GFP_KERNEL);
+	regs = kzalloc(new_size, GFP_ATOMIC);
 	if (!regs) {
 		printk(KERN_WARNING "Unable to allocate DWARF registers\n");
 		/*
@@ -531,7 +531,7 @@ struct dwarf_frame *dwarf_unwind_stack(unsigned long pc,
 		define_ra = true;
 	}
 
-	frame = kzalloc(sizeof(*frame), GFP_KERNEL);
+	frame = kzalloc(sizeof(*frame), GFP_ATOMIC);
 	if (!frame)
 		return NULL;
 
-- 
cgit v1.1


From 48e4d4604b7da52d6a56ddc821a460b183b7353d Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 01:05:46 +0900
Subject: sh: stacktrace: Add reliability checks in address saving ops.

This adopts the reliability checks from the x86 stacktrace code so known
bad addresses are not recorded in the stack trace buffer.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/stacktrace.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/stacktrace.c b/arch/sh/kernel/stacktrace.c
index 45b1add..a0f497b 100644
--- a/arch/sh/kernel/stacktrace.c
+++ b/arch/sh/kernel/stacktrace.c
@@ -38,6 +38,9 @@ static void save_stack_address(void *data, unsigned long addr, int reliable)
 {
 	struct stack_trace *trace = data;
 
+	if (!reliable)
+		return;
+
 	if (trace->skip > 0) {
 		trace->skip--;
 		return;
@@ -67,6 +70,9 @@ save_stack_address_nosched(void *data, unsigned long addr, int reliable)
 {
 	struct stack_trace *trace = (struct stack_trace *)data;
 
+	if (!reliable)
+		return;
+
 	if (in_sched_functions(addr))
 		return;
 
-- 
cgit v1.1


From f9967e23c10f025d85bbf66a2a5f18f016890ccb Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 01:09:03 +0900
Subject: sh: flag the default unwinder as reliable.

This flags the default unwinder as reliable, as it tends to be reliable
enough for the purposes of the stacktrace buffer. We leave the unreliable
cases for the unwind methods that we know to be completely broken.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/dumpstack.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/dumpstack.c b/arch/sh/kernel/dumpstack.c
index 005dc1d..6f5ad15 100644
--- a/arch/sh/kernel/dumpstack.c
+++ b/arch/sh/kernel/dumpstack.c
@@ -61,7 +61,7 @@ stack_reader_dump(struct task_struct *task, struct pt_regs *regs,
 		unsigned long addr = *sp++;
 
 		if (__kernel_text_address(addr)) {
-			ops->address(data, addr, 0);
+			ops->address(data, addr, 1);
 
 			print_ftrace_graph_addr(addr, data, ops,
 						context, &graph);
-- 
cgit v1.1


From 606b4c992f3b28f906100f1b6eb49059909d8da7 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 01:11:37 +0900
Subject: sh: stacktrace: Properly terminate the trace entry buffer.

This inserts a ULONG_MAX entry at the end of the valid entries in the
stack trace buffer so the default code doesn't need to scan to the end of
available slots. This also makes the trace buffer termination behaviour
consistent with the other architectures.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/stacktrace.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/stacktrace.c b/arch/sh/kernel/stacktrace.c
index a0f497b..c2e45c4 100644
--- a/arch/sh/kernel/stacktrace.c
+++ b/arch/sh/kernel/stacktrace.c
@@ -62,6 +62,8 @@ void save_stack_trace(struct stack_trace *trace)
 	unsigned long *sp = (unsigned long *)current_stack_pointer;
 
 	unwind_stack(current, NULL, sp,  &save_stack_ops, trace);
+	if (trace->nr_entries < trace->max_entries)
+		trace->entries[trace->nr_entries++] = ULONG_MAX;
 }
 EXPORT_SYMBOL_GPL(save_stack_trace);
 
@@ -97,5 +99,7 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 	unsigned long *sp = (unsigned long *)tsk->thread.sp;
 
 	unwind_stack(current, NULL, sp,  &save_stack_ops_nosched, trace);
+	if (trace->nr_entries < trace->max_entries)
+		trace->entries[trace->nr_entries++] = ULONG_MAX;
 }
 EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
-- 
cgit v1.1


From 7a90e00dda0bae66b5232d5a37155f13a0581369 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 07:41:45 +0900
Subject: sh: Make sure rte delay slots are nopped out on all parts.

Future SH parts do not support any instruction but a nop in the rte delay
slot, so make the change for all offending parts. SH-5 is excluded from
this, and already has its own set of restrictions with regards to rte
delay slot handling.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh2/entry.S  | 3 ++-
 arch/sh/kernel/cpu/sh2a/entry.S | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S
index becc54c45..c8a4331 100644
--- a/arch/sh/kernel/cpu/sh2/entry.S
+++ b/arch/sh/kernel/cpu/sh2/entry.S
@@ -227,8 +227,9 @@ ENTRY(sh_bios_handler)
 	mov.l	@r15+, r14
 	add	#8,r15
 	lds.l	@r15+, pr
+	mov.l	@r15+,r15
 	rte
-	 mov.l	@r15+,r15
+	 nop
 	.align	2
 1:	.long	gdb_vbr_vector
 #endif /* CONFIG_SH_STANDARD_BIOS */
diff --git a/arch/sh/kernel/cpu/sh2a/entry.S b/arch/sh/kernel/cpu/sh2a/entry.S
index ab3903e..222742d 100644
--- a/arch/sh/kernel/cpu/sh2a/entry.S
+++ b/arch/sh/kernel/cpu/sh2a/entry.S
@@ -176,8 +176,9 @@ ENTRY(sh_bios_handler)
 	movml.l	@r15+,r14
 	add	#8,r15
 	lds.l	@r15+, pr
+	mov.l	@r15+,r15
 	rte
-	 mov.l	@r15+,r15
+	 nop
 	.align	2
 1:	.long	gdb_vbr_vector
 #endif /* CONFIG_SH_STANDARD_BIOS */
-- 
cgit v1.1


From 7dd6662a92fe9a15ad565045aa60367995cc533d Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 07:43:21 +0900
Subject: sh: delay slot future proofing via EXPMASK on SH-4A parts.

This implements EXPMASK initialization code for SH-4A parts, where it is
possible to disable compat features that will go away in newer cores.
Presently this includes disabling support for non-nop instructions in the
rte delay slot, as well as a sleep instruction being placed in a delay
slot (neither of which the kernel does any longer). As a result of this,
any future offenders will have illegal slot exceptions generated for
them.

Associative writes for the memory-mapped cache array are still left
enabled, until such a point that special cache operations for SH-4A are
provided to move off of the current (and rather dated) SH-4 versions.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/init.c | 34 +++++++++++++++++++++++++++++++++-
 1 file changed, 33 insertions(+), 1 deletion(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c
index ad85421..d40b9db 100644
--- a/arch/sh/kernel/cpu/init.c
+++ b/arch/sh/kernel/cpu/init.c
@@ -3,7 +3,7 @@
  *
  * CPU init code
  *
- * Copyright (C) 2002 - 2007  Paul Mundt
+ * Copyright (C) 2002 - 2009  Paul Mundt
  * Copyright (C) 2003  Richard Curnow
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -62,6 +62,37 @@ static void __init speculative_execution_init(void)
 #define speculative_execution_init()	do { } while (0)
 #endif
 
+#ifdef CONFIG_CPU_SH4A
+#define EXPMASK			0xff2f0004
+#define EXPMASK_RTEDS		(1 << 0)
+#define EXPMASK_BRDSSLP		(1 << 1)
+#define EXPMASK_MMCAW		(1 << 4)
+
+static void __init expmask_init(void)
+{
+	unsigned long expmask = __raw_readl(EXPMASK);
+
+	/*
+	 * Future proofing.
+	 *
+	 * Disable support for slottable sleep instruction
+	 * and non-nop instructions in the rte delay slot.
+	 */
+	expmask &= ~(EXPMASK_RTEDS | EXPMASK_BRDSSLP);
+
+	/*
+	 * Enable associative writes to the memory-mapped cache array
+	 * until the cache flush ops have been rewritten.
+	 */
+	expmask |= EXPMASK_MMCAW;
+
+	__raw_writel(expmask, EXPMASK);
+	ctrl_barrier();
+}
+#else
+#define expmask_init()	do { } while (0)
+#endif
+
 /* 2nd-level cache init */
 void __uses_jump_to_uncached __attribute__ ((weak)) l2_cache_init(void)
 {
@@ -321,4 +352,5 @@ asmlinkage void __init sh_cpu_init(void)
 #endif
 
 	speculative_execution_init();
+	expmask_init();
 }
-- 
cgit v1.1


From 180aa6e6aa11922dcd4c13df1967d62bb2ede76c Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Sat, 15 Aug 2009 00:04:00 +0100
Subject: sh: Set the cfa_offset to 0 if we see a DW_CFA_def_cfa_register op

The way that the CFA is calculated can change as we progress through a
function. If we see a DW_CFA_def_cfa_register op we need to reset the
frame's cfa_offset value which may have been previously setup.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/dwarf.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index db02136..c6c5764 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -449,6 +449,7 @@ static int dwarf_cfa_execute_insns(unsigned char *insn_start,
 			count = dwarf_read_uleb128(current_insn,
 						   &frame->cfa_register);
 			current_insn += count;
+			frame->cfa_offset = 0;
 			frame->flags |= DWARF_FRAME_CFA_REG_OFFSET;
 			break;
 		case DW_CFA_def_cfa_offset:
-- 
cgit v1.1


From 9747e78b304b44d6fb73e2c8071406d55aa8bb75 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Sat, 15 Aug 2009 02:53:34 +0000
Subject: sh: use in-soc KEYSC on se7724

This patch updates the Solution Engine 7724 board code to use
in-SoC KEYSC resources for the keyboard platform device. Using
the in-SoC key scan controller fixes a crash-during-resume issue.

Without this patch the KEYSC hardware block located in the board
specific FPGA is used together with an external IRQ which is
routed through the FPGA and handled by some board specific demux
code. This board specific FPGA interrupt code does not implement
desc->set_wake() so the enable_irq_wake() call in the sh_keysc
driver will fail at suspend-to-ram time and the disable_irq_wake()
will bomb out when resuming.

Changing the platform data to use the in-SoC KEYSC hardware makes
the se7724 board support code less special which is a good thing.
Also, the board specific KEYSC pin setup code selects in-SoC pin
functions already which makes the current FPGA platform device data
look like a typo.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-se/7724/setup.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 8fed45a..15456a0 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -238,7 +238,7 @@ static struct platform_device ceu1_device = {
 	},
 };
 
-/* KEYSC */
+/* KEYSC in SoC (Needs SW33-2 set to ON) */
 static struct sh_keysc_info keysc_info = {
 	.mode = SH_KEYSC_MODE_1,
 	.scan_timing = 10,
@@ -255,12 +255,13 @@ static struct sh_keysc_info keysc_info = {
 
 static struct resource keysc_resources[] = {
 	[0] = {
-		.start  = 0x1a204000,
-		.end    = 0x1a20400f,
+		.name	= "KEYSC",
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = IRQ0_KEY,
+		.start  = 79,
 		.flags  = IORESOURCE_IRQ,
 	},
 };
-- 
cgit v1.1


From 237674e050ae8ea40a432412df6c15d60b7ae8a6 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Sat, 15 Aug 2009 02:53:42 +0000
Subject: sh: sh7724 ddr self-refresh changes

This patch updates the SuperH Mobile sleep assembly code with
support for DBSC memory controller found in the sh7724 processor.

Without this fix the memory hooked up to the sh7724 processor
will never enter self-refresh mode before suspending to ram. The
effect of this is that the memory contents most likeley will be
lost upon resume which may or may not be what you want.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/shmobile/sleep.S | 70 +++++++++++++++++++++++++++++++++++--
 1 file changed, 68 insertions(+), 2 deletions(-)

(limited to 'arch/sh')

diff --git a/arch/sh/kernel/cpu/shmobile/sleep.S b/arch/sh/kernel/cpu/shmobile/sleep.S
index 5d888ef..baf2d7d 100644
--- a/arch/sh/kernel/cpu/shmobile/sleep.S
+++ b/arch/sh/kernel/cpu/shmobile/sleep.S
@@ -26,8 +26,30 @@ ENTRY(sh_mobile_standby)
 
 	tst	#SUSP_SH_SF, r0
 	bt	skip_set_sf
+#ifdef CONFIG_CPU_SUBTYPE_SH7724
+	/* DBSC: put memory in self-refresh mode */
 
-	/* SDRAM: disable power down and put in self-refresh mode */
+	mov.l	dben_reg, r4
+	mov.l	dben_data0, r1
+	mov.l	r1, @r4
+
+	mov.l	dbrfpdn0_reg, r4
+	mov.l	dbrfpdn0_data0, r1
+	mov.l	r1, @r4
+
+	mov.l	dbcmdcnt_reg, r4
+	mov.l	dbcmdcnt_data0, r1
+	mov.l	r1, @r4
+
+	mov.l	dbcmdcnt_reg, r4
+	mov.l	dbcmdcnt_data1, r1
+	mov.l	r1, @r4
+
+	mov.l	dbrfpdn0_reg, r4
+	mov.l	dbrfpdn0_data1, r1
+	mov.l	r1, @r4
+#else
+	/* SBSC: disable power down and put in self-refresh mode */
 	mov.l	1f, r4
 	mov.l	2f, r1
 	mov.l	@r4, r2
@@ -35,6 +57,7 @@ ENTRY(sh_mobile_standby)
 	mov.l   3f, r3
 	and	r3, r2
 	mov.l	r2, @r4
+#endif
 
 skip_set_sf:
 	tst	#SUSP_SH_SLEEP, r0
@@ -84,7 +107,36 @@ done_sleep:
 	tst	#SUSP_SH_SF, r0
 	bt	skip_restore_sf
 
-	/* SDRAM: set auto-refresh mode */
+#ifdef CONFIG_CPU_SUBTYPE_SH7724
+	/* DBSC: put memory in auto-refresh mode */
+
+	mov.l	dbrfpdn0_reg, r4
+	mov.l	dbrfpdn0_data0, r1
+	mov.l	r1, @r4
+
+	/* sleep 140 ns */
+	nop
+	nop
+	nop
+	nop
+
+	mov.l	dbcmdcnt_reg, r4
+	mov.l	dbcmdcnt_data0, r1
+	mov.l	r1, @r4
+
+	mov.l	dbcmdcnt_reg, r4
+	mov.l	dbcmdcnt_data1, r1
+	mov.l	r1, @r4
+
+	mov.l	dben_reg, r4
+	mov.l	dben_data1, r1
+	mov.l	r1, @r4
+
+	mov.l	dbrfpdn0_reg, r4
+	mov.l	dbrfpdn0_data2, r1
+	mov.l	r1, @r4
+#else
+	/* SBSC: set auto-refresh mode */
 	mov.l	1f, r4
 	mov.l	@r4, r2
 	mov.l   4f, r3
@@ -98,15 +150,29 @@ done_sleep:
 	add	r4, r3
 	or	r2, r3
 	mov.l	r3, @r1
+#endif
 skip_restore_sf:
 	rts
 	 nop
 
 	.balign 4
+#ifdef CONFIG_CPU_SUBTYPE_SH7724
+dben_reg:	.long	0xfd000010 /* DBEN */
+dben_data0:	.long	0
+dben_data1:	.long	1
+dbrfpdn0_reg:	.long	0xfd000040 /* DBRFPDN0 */
+dbrfpdn0_data0:	.long	0
+dbrfpdn0_data1:	.long	1
+dbrfpdn0_data2:	.long	0x00010000
+dbcmdcnt_reg:	.long	0xfd000014 /* DBCMDCNT */
+dbcmdcnt_data0:	.long	2
+dbcmdcnt_data1:	.long	4
+#else
 1:	.long	0xfe400008 /* SDCR0 */
 2:	.long	0x00000400
 3:	.long	0xffff7fff
 4:	.long	0xfffffbff
+#endif
 5:	.long	0xa4150020 /* STBCR */
 6:	.long   0xfe40001c /* RTCOR */
 7:	.long   0xfe400018 /* RTCNT */
-- 
cgit v1.1