From 25d5c699f983a2da51f5165eb9a8fc6338124b6c Mon Sep 17 00:00:00 2001 From: Philip Rakity Date: Sun, 7 Nov 2010 16:22:28 -0500 Subject: mmc: Fix printing of card DDR type We should not call mmc_card_set_ddr_mode() if we are in single data mode. This sets DDR and causes the kernel log to say the card is DDR when it is not. Explicitly set ddr to 0 rather then rely on MMC_SDR_MODE being 0 when doing the checks. Signed-off-by: Philip Rakity Acked-by: Linus Walleij Acked-by: Kyungmin Park Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/mmc/core') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 995261f..77f93c3 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -375,7 +375,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, struct mmc_card *oldcard) { struct mmc_card *card; - int err, ddr = MMC_SDR_MODE; + int err, ddr = 0; u32 cid[4]; unsigned int max_dtr; @@ -562,7 +562,11 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, 1 << bus_width, ddr); err = 0; } else { - mmc_card_set_ddr_mode(card); + if (ddr) + mmc_card_set_ddr_mode(card); + else + ddr = MMC_SDR_MODE; + mmc_set_bus_width_ddr(card->host, bus_width, ddr); } } -- cgit v1.1 From d9bcbf343ec63e1104b5276195888ee06b4d086f Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 11 Nov 2010 17:32:25 +0100 Subject: mmc: fix rmmod race for hosts using card-detection polling MMC hosts that poll for card detection by defining the MMC_CAP_NEEDS_POLL flag have a race on rmmod, where the delayed work is cancelled without waiting for completed polling. To prevent this a _sync version of the work cancellation has to be used. Signed-off-by: Guennadi Liakhovetski Cc: Signed-off-by: Chris Ball --- drivers/mmc/core/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/mmc/core') diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 8f86d70..31ae07a 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1559,7 +1559,7 @@ void mmc_stop_host(struct mmc_host *host) if (host->caps & MMC_CAP_DISABLE) cancel_delayed_work(&host->disable); - cancel_delayed_work(&host->detect); + cancel_delayed_work_sync(&host->detect); mmc_flush_scheduled_work(); /* clear pm flags now and let card drivers set them as needed */ -- cgit v1.1 From 4d0812c37f2f6cf6fc7ca086b5a5e572cbbe7f6d Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Sun, 14 Nov 2010 12:40:33 +0200 Subject: mmc: sdio: fix nasty oops in mmc_sdio_detect Power off the card in mmc_sdio_detect __before__ a potential error handler, which completely removes the card, executes, and only if the card was successfully powered on beforehand. While we're at it, use the _sync variant of the runtime PM put API, in order to ensure that the card is left powered off in case an error occurred, and the card is going to be removed. Reproduced and tested on the OLPC XO-1.5. Reported-by: Daniel Drake Signed-off-by: Ohad Ben-Cohen Signed-off-by: Chris Ball --- drivers/mmc/core/sdio.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) (limited to 'drivers/mmc/core') diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index c3ad105..42a949b 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -560,6 +560,19 @@ static void mmc_sdio_detect(struct mmc_host *host) mmc_release_host(host); + /* + * Tell PM core it's OK to power off the card now. + * + * The _sync variant is used in order to ensure that the card + * is left powered off in case an error occurred, and the card + * is going to be removed. + * + * Since there is no specific reason to believe a new user + * is about to show up at this point, the _sync variant is + * desirable anyway. + */ + pm_runtime_put_sync(&host->card->dev); + out: if (err) { mmc_sdio_remove(host); @@ -568,9 +581,6 @@ out: mmc_detach_bus(host); mmc_release_host(host); } - - /* Tell PM core that we're done */ - pm_runtime_put(&host->card->dev); } /* -- cgit v1.1 From ed919b0125b26dcc052e44836f66e7e1f5c49c7e Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Fri, 19 Nov 2010 09:29:09 +0200 Subject: mmc: sdio: fix runtime PM anomalies by introducing MMC_CAP_POWER_OFF_CARD Some board/card/host configurations are not capable of powering off the card after boot. To support such configurations, and to allow smoother transition to runtime PM behavior, MMC_CAP_POWER_OFF_CARD is added, so hosts need to explicitly indicate whether it's OK to power off their cards after boot. SDIO core will enable runtime PM for a card only if that cap is set. As a result, the card will be powered down after boot, and will only be powered up again when a driver is loaded (and then it's up to the driver to decide whether power will be kept or not). This will prevent sdio_bus_probe() failures with setups that do not support powering off the card. Reported-and-tested-by: Daniel Drake Reported-and-tested-by: Arnd Hannemann Signed-off-by: Ohad Ben-Cohen Signed-off-by: Chris Ball --- drivers/mmc/core/sdio.c | 37 +++++++++++++++++++++++-------------- drivers/mmc/core/sdio_bus.c | 33 ++++++++++++++++++++++----------- 2 files changed, 45 insertions(+), 25 deletions(-) (limited to 'drivers/mmc/core') diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 42a949b..efef5f9 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -547,9 +547,11 @@ static void mmc_sdio_detect(struct mmc_host *host) BUG_ON(!host->card); /* Make sure card is powered before detecting it */ - err = pm_runtime_get_sync(&host->card->dev); - if (err < 0) - goto out; + if (host->caps & MMC_CAP_POWER_OFF_CARD) { + err = pm_runtime_get_sync(&host->card->dev); + if (err < 0) + goto out; + } mmc_claim_host(host); @@ -571,7 +573,8 @@ static void mmc_sdio_detect(struct mmc_host *host) * is about to show up at this point, the _sync variant is * desirable anyway. */ - pm_runtime_put_sync(&host->card->dev); + if (host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_put_sync(&host->card->dev); out: if (err) { @@ -728,16 +731,21 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr) card = host->card; /* - * Let runtime PM core know our card is active + * Enable runtime PM only if supported by host+card+board */ - err = pm_runtime_set_active(&card->dev); - if (err) - goto remove; + if (host->caps & MMC_CAP_POWER_OFF_CARD) { + /* + * Let runtime PM core know our card is active + */ + err = pm_runtime_set_active(&card->dev); + if (err) + goto remove; - /* - * Enable runtime PM for this card - */ - pm_runtime_enable(&card->dev); + /* + * Enable runtime PM for this card + */ + pm_runtime_enable(&card->dev); + } /* * The number of functions on the card is encoded inside @@ -755,9 +763,10 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr) goto remove; /* - * Enable Runtime PM for this func + * Enable Runtime PM for this func (if supported) */ - pm_runtime_enable(&card->sdio_func[i]->dev); + if (host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_enable(&card->sdio_func[i]->dev); } mmc_release_host(host); diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c index 2716c7a..203da44 100644 --- a/drivers/mmc/core/sdio_bus.c +++ b/drivers/mmc/core/sdio_bus.c @@ -17,6 +17,7 @@ #include #include +#include #include #include "sdio_cis.h" @@ -132,9 +133,11 @@ static int sdio_bus_probe(struct device *dev) * it should call pm_runtime_put_noidle() in its probe routine and * pm_runtime_get_noresume() in its remove routine. */ - ret = pm_runtime_get_sync(dev); - if (ret < 0) - goto out; + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) { + ret = pm_runtime_get_sync(dev); + if (ret < 0) + goto out; + } /* Set the default block size so the driver is sure it's something * sensible. */ @@ -151,7 +154,8 @@ static int sdio_bus_probe(struct device *dev) return 0; disable_runtimepm: - pm_runtime_put_noidle(dev); + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_put_noidle(dev); out: return ret; } @@ -160,12 +164,14 @@ static int sdio_bus_remove(struct device *dev) { struct sdio_driver *drv = to_sdio_driver(dev->driver); struct sdio_func *func = dev_to_sdio_func(dev); - int ret; + int ret = 0; /* Make sure card is powered before invoking ->remove() */ - ret = pm_runtime_get_sync(dev); - if (ret < 0) - goto out; + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) { + ret = pm_runtime_get_sync(dev); + if (ret < 0) + goto out; + } drv->remove(func); @@ -178,10 +184,12 @@ static int sdio_bus_remove(struct device *dev) } /* First, undo the increment made directly above */ - pm_runtime_put_noidle(dev); + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_put_noidle(dev); /* Then undo the runtime PM settings in sdio_bus_probe() */ - pm_runtime_put_noidle(dev); + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_put_noidle(dev); out: return ret; @@ -191,6 +199,8 @@ out: static int sdio_bus_pm_prepare(struct device *dev) { + struct sdio_func *func = dev_to_sdio_func(dev); + /* * Resume an SDIO device which was suspended at run time at this * point, in order to allow standard SDIO suspend/resume paths @@ -212,7 +222,8 @@ static int sdio_bus_pm_prepare(struct device *dev) * since there is little point in failing system suspend if a * device can't be resumed. */ - pm_runtime_resume(dev); + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_resume(dev); return 0; } -- cgit v1.1