From 2f86c3e67d6423d6d23ee2f737ad4f0730435742 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 17 Sep 2008 16:34:11 +0100 Subject: uwb: add the UWB stack (build system) The Kbuild and Kconfig files. Signed-off-by: Greg Kroah-Hartman Signed-off-by: David Vrabel --- drivers/uwb/Kconfig | 28 ++++++++++++++++++++++++++++ drivers/uwb/Makefile | 20 ++++++++++++++++++++ 2 files changed, 48 insertions(+) create mode 100644 drivers/uwb/Kconfig create mode 100644 drivers/uwb/Makefile (limited to 'drivers/uwb') diff --git a/drivers/uwb/Kconfig b/drivers/uwb/Kconfig new file mode 100644 index 0000000..3f01a69 --- /dev/null +++ b/drivers/uwb/Kconfig @@ -0,0 +1,28 @@ +# +# UWB device configuration +# + +menuconfig UWB + tristate "Ultra Wide Band devices" + depends on PCI + default n + help + UWB is a high-bandwidth, low-power, point-to-point radio + technology using a wide spectrum (3.1-10.6GHz). It is + optimized for in-room use (480Mbps at 2 meters, 110Mbps at + 10m). It serves as the transport layer for other protocols, + such as Wireless USB (WUSB), IP (WLP) and upcoming + Bluetooth and 1394 + + The topology is peer to peer; however, higher level + protocols (such as WUSB) might impose a master/slave + relationship. + + Say Y here if your computer has UWB radio controllers (USB or PCI) + based. You will need to enable the radio controllers + below. It is ok to select all of them, no harm done. + + For more help check the UWB and WUSB related files in + . + + To compile the UWB stack as a module, choose M here. diff --git a/drivers/uwb/Makefile b/drivers/uwb/Makefile new file mode 100644 index 0000000..9a67be5 --- /dev/null +++ b/drivers/uwb/Makefile @@ -0,0 +1,20 @@ +obj-$(CONFIG_UWB) += uwb.o + +uwb-objs := \ + address.o \ + beacon.o \ + driver.o \ + drp.o \ + drp-avail.o \ + drp-ie.o \ + est.o \ + ie.o \ + lc-dev.o \ + lc-rc.o \ + neh.o \ + pal.o \ + reset.o \ + rsv.o \ + scan.o \ + uwb-debug.o \ + uwbd.o -- cgit v1.1