From f8d23d309809ae69c763520dababb7e845938272 Mon Sep 17 00:00:00 2001 From: Olav Kongas Date: Thu, 4 Aug 2005 17:02:54 +0300 Subject: [PATCH] USB: isp116x-hcd: remove clock() and reset() This patch removes support for user-provided platform-specific hardware reset and clock starting/stopping functions. Hardware reset was needed earlier as getting the software reset working was tricky due to the lack of documentation. Recently, a number of people using isp116x have said the software reset is working for them. I haven't heard of anybody using the clock starting/stopping. Signed-off-by: Olav Kongas Signed-off-by: Greg Kroah-Hartman --- include/linux/usb_isp116x.h | 9 --------- 1 file changed, 9 deletions(-) (limited to 'include') diff --git a/include/linux/usb_isp116x.h b/include/linux/usb_isp116x.h index 8f0b3c2..436dd8a 100644 --- a/include/linux/usb_isp116x.h +++ b/include/linux/usb_isp116x.h @@ -19,15 +19,6 @@ struct isp116x_platform_data { prevents stopping internal clock, increasing thereby power consumption in suspended state. */ unsigned remote_wakeup_enable:1; - /* Hardware reset set/clear. If implemented, this function must: - if set == 0, deassert chip's HW reset pin - otherwise, assert chip's HW reset pin */ - void (*reset) (struct device * dev, int set); - /* Hardware clock start/stop. If implemented, this function must: - if start == 0, stop the external clock - otherwise, start the external clock - */ - void (*clock) (struct device * dev, int start); /* Inter-io delay (ns). The chip is picky about access timings; it expects at least: 150ns delay between consecutive accesses to DATA_REG, -- cgit v1.1