From cf85d08fdf4548ee46657ccfb7f9949a85145db5 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Tue, 7 Oct 2008 13:45:02 +0000 Subject: dsa: add support for original DSA tagging format Most of the DSA switches currently in the field do not support the Ethertype DSA tagging format that one of the previous patches added support for, but only the original DSA tagging format. The original DSA tagging format carries the same information as the Ethertype DSA tagging format, but with the difference that it does not have an ethertype field. In other words, when receiving a packet that is tagged with an original DSA tag, there is no way of telling in eth_type_trans() that this packet is in fact a DSA-tagged packet. This patch adds a hook into eth_type_trans() which is only compiled in if support for a switch chip that doesn't support Ethertype DSA is selected, and which checks whether there is a DSA switch driver instance attached to this network device which uses the old tag format. If so, it sets the protocol field to ETH_P_DSA without looking at the packet, so that the packet ends up in the right place. Signed-off-by: Lennert Buytenhek Tested-by: Nicolas Pitre Tested-by: Peter van Valderen Tested-by: Dirk Teurlings Signed-off-by: David S. Miller --- net/dsa/dsa_priv.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'net/dsa/dsa_priv.h') diff --git a/net/dsa/dsa_priv.h b/net/dsa/dsa_priv.h index 21ee905..2f1d68c 100644 --- a/net/dsa/dsa_priv.h +++ b/net/dsa/dsa_priv.h @@ -103,6 +103,9 @@ struct net_device *dsa_slave_create(struct dsa_switch *ds, struct device *parent, int port, char *name); +/* tag_dsa.c */ +int dsa_xmit(struct sk_buff *skb, struct net_device *dev); + /* tag_edsa.c */ int edsa_xmit(struct sk_buff *skb, struct net_device *dev); -- cgit v1.1