diff options
-rw-r--r-- | arch/tile/Kconfig | 8 | ||||
-rw-r--r-- | arch/tile/include/asm/pci.h | 3 | ||||
-rw-r--r-- | arch/tile/kernel/pci.c | 207 |
3 files changed, 127 insertions, 91 deletions
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index e32b0c2..635e1bf 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -339,6 +339,14 @@ config NO_IOPORT source "drivers/pci/Kconfig" +config HOTPLUG + bool "Support for hot-pluggable devices" + ---help--- + Say Y here if you want to plug devices into your computer while + the system is running, and be able to use them quickly. In many + cases, the devices can likewise be unplugged at any time too. + One well-known example of this is USB. + source "drivers/pci/hotplug/Kconfig" endmenu diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h index c3fc458..7f03cef 100644 --- a/arch/tile/include/asm/pci.h +++ b/arch/tile/include/asm/pci.h @@ -46,7 +46,8 @@ struct pci_controller { */ #define PCI_DMA_BUS_IS_PHYS 1 -int __init tile_pci_init(void); +int __devinit tile_pci_init(void); +int __devinit pcibios_init(void); void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max); static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {} diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c index ea38f0c..65add02 100644 --- a/arch/tile/kernel/pci.c +++ b/arch/tile/kernel/pci.c @@ -1,5 +1,5 @@ /* - * Copyright 2010 Tilera Corporation. All Rights Reserved. + * Copyright 2011 Tilera Corporation. All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -59,6 +59,7 @@ int __write_once tile_plx_gen1; static struct pci_controller controllers[TILE_NUM_PCIE]; static int num_controllers; +static int pci_scan_flags[TILE_NUM_PCIE]; static struct pci_ops tile_cfg_ops; @@ -79,7 +80,7 @@ EXPORT_SYMBOL(pcibios_align_resource); * controller_id is the controller number, config type is 0 or 1 for * config0 or config1 operations. */ -static int __init tile_pcie_open(int controller_id, int config_type) +static int __devinit tile_pcie_open(int controller_id, int config_type) { char filename[32]; int fd; @@ -95,7 +96,7 @@ static int __init tile_pcie_open(int controller_id, int config_type) /* * Get the IRQ numbers from the HV and set up the handlers for them. */ -static int __init tile_init_irqs(int controller_id, +static int __devinit tile_init_irqs(int controller_id, struct pci_controller *controller) { char filename[32]; @@ -139,71 +140,80 @@ static int __init tile_init_irqs(int controller_id, * * Returns the number of controllers discovered. */ -int __init tile_pci_init(void) +int __devinit tile_pci_init(void) { int i; pr_info("PCI: Searching for controllers...\n"); + /* Re-init number of PCIe controllers to support hot-plug feature. */ + num_controllers = 0; + /* Do any configuration we need before using the PCIe */ for (i = 0; i < TILE_NUM_PCIE; i++) { - int hv_cfg_fd0 = -1; - int hv_cfg_fd1 = -1; - int hv_mem_fd = -1; - char name[32]; - struct pci_controller *controller; - /* - * Open the fd to the HV. If it fails then this - * device doesn't exist. + * To see whether we need a real config op based on + * the results of pcibios_init(), to support PCIe hot-plug. */ - hv_cfg_fd0 = tile_pcie_open(i, 0); - if (hv_cfg_fd0 < 0) - continue; - hv_cfg_fd1 = tile_pcie_open(i, 1); - if (hv_cfg_fd1 < 0) { - pr_err("PCI: Couldn't open config fd to HV " - "for controller %d\n", i); - goto err_cont; - } + if (pci_scan_flags[i] == 0) { + int hv_cfg_fd0 = -1; + int hv_cfg_fd1 = -1; + int hv_mem_fd = -1; + char name[32]; + struct pci_controller *controller; + + /* + * Open the fd to the HV. If it fails then this + * device doesn't exist. + */ + hv_cfg_fd0 = tile_pcie_open(i, 0); + if (hv_cfg_fd0 < 0) + continue; + hv_cfg_fd1 = tile_pcie_open(i, 1); + if (hv_cfg_fd1 < 0) { + pr_err("PCI: Couldn't open config fd to HV " + "for controller %d\n", i); + goto err_cont; + } - sprintf(name, "pcie/%d/mem", i); - hv_mem_fd = hv_dev_open((HV_VirtAddr)name, 0); - if (hv_mem_fd < 0) { - pr_err("PCI: Could not open mem fd to HV!\n"); - goto err_cont; - } + sprintf(name, "pcie/%d/mem", i); + hv_mem_fd = hv_dev_open((HV_VirtAddr)name, 0); + if (hv_mem_fd < 0) { + pr_err("PCI: Could not open mem fd to HV!\n"); + goto err_cont; + } - pr_info("PCI: Found PCI controller #%d\n", i); + pr_info("PCI: Found PCI controller #%d\n", i); - controller = &controllers[num_controllers]; + controller = &controllers[i]; - if (tile_init_irqs(i, controller)) { - pr_err("PCI: Could not initialize " - "IRQs, aborting.\n"); - goto err_cont; - } + if (tile_init_irqs(i, controller)) { + pr_err("PCI: Could not initialize " + "IRQs, aborting.\n"); + goto err_cont; + } - controller->index = num_controllers; - controller->hv_cfg_fd[0] = hv_cfg_fd0; - controller->hv_cfg_fd[1] = hv_cfg_fd1; - controller->hv_mem_fd = hv_mem_fd; - controller->first_busno = 0; - controller->last_busno = 0xff; - controller->ops = &tile_cfg_ops; + controller->index = i; + controller->hv_cfg_fd[0] = hv_cfg_fd0; + controller->hv_cfg_fd[1] = hv_cfg_fd1; + controller->hv_mem_fd = hv_mem_fd; + controller->first_busno = 0; + controller->last_busno = 0xff; + controller->ops = &tile_cfg_ops; - num_controllers++; - continue; + num_controllers++; + continue; err_cont: - if (hv_cfg_fd0 >= 0) - hv_dev_close(hv_cfg_fd0); - if (hv_cfg_fd1 >= 0) - hv_dev_close(hv_cfg_fd1); - if (hv_mem_fd >= 0) - hv_dev_close(hv_mem_fd); - continue; + if (hv_cfg_fd0 >= 0) + hv_dev_close(hv_cfg_fd0); + if (hv_cfg_fd1 >= 0) + hv_dev_close(hv_cfg_fd1); + if (hv_mem_fd >= 0) + hv_dev_close(hv_mem_fd); + continue; + } } /* @@ -232,7 +242,7 @@ static int tile_map_irq(struct pci_dev *dev, u8 slot, u8 pin) } -static void __init fixup_read_and_payload_sizes(void) +static void __devinit fixup_read_and_payload_sizes(void) { struct pci_dev *dev = NULL; int smallest_max_payload = 0x1; /* Tile maxes out at 256 bytes. */ @@ -282,7 +292,7 @@ static void __init fixup_read_and_payload_sizes(void) * The controllers have been set up by the time we get here, by a call to * tile_pci_init. */ -static int __init pcibios_init(void) +int __devinit pcibios_init(void) { int i; @@ -296,25 +306,31 @@ static int __init pcibios_init(void) mdelay(250); /* Scan all of the recorded PCI controllers. */ - for (i = 0; i < num_controllers; i++) { - struct pci_controller *controller = &controllers[i]; - struct pci_bus *bus; - - pr_info("PCI: initializing controller #%d\n", i); - + for (i = 0; i < TILE_NUM_PCIE; i++) { /* - * This comes from the generic Linux PCI driver. - * - * It reads the PCI tree for this bus into the Linux - * data structures. - * - * This is inlined in linux/pci.h and calls into - * pci_scan_bus_parented() in probe.c. + * Do real pcibios init ops if the controller is initialized + * by tile_pci_init() successfully and not initialized by + * pcibios_init() yet to support PCIe hot-plug. */ - bus = pci_scan_bus(0, controller->ops, controller); - controller->root_bus = bus; - controller->last_busno = bus->subordinate; - + if (pci_scan_flags[i] == 0 && controllers[i].ops != NULL) { + struct pci_controller *controller = &controllers[i]; + struct pci_bus *bus; + + pr_info("PCI: initializing controller #%d\n", i); + + /* + * This comes from the generic Linux PCI driver. + * + * It reads the PCI tree for this bus into the Linux + * data structures. + * + * This is inlined in linux/pci.h and calls into + * pci_scan_bus_parented() in probe.c. + */ + bus = pci_scan_bus(0, controller->ops, controller); + controller->root_bus = bus; + controller->last_busno = bus->subordinate; + } } /* Do machine dependent PCI interrupt routing */ @@ -326,34 +342,45 @@ static int __init pcibios_init(void) * It allocates all of the resources (I/O memory, etc) * associated with the devices read in above. */ - pci_assign_unassigned_resources(); /* Configure the max_read_size and max_payload_size values. */ fixup_read_and_payload_sizes(); /* Record the I/O resources in the PCI controller structure. */ - for (i = 0; i < num_controllers; i++) { - struct pci_bus *root_bus = controllers[i].root_bus; - struct pci_bus *next_bus; - struct pci_dev *dev; - - list_for_each_entry(dev, &root_bus->devices, bus_list) { - /* Find the PCI host controller, ie. the 1st bridge. */ - if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && - (PCI_SLOT(dev->devfn) == 0)) { - next_bus = dev->subordinate; - controllers[i].mem_resources[0] = - *next_bus->resource[0]; - controllers[i].mem_resources[1] = - *next_bus->resource[1]; - controllers[i].mem_resources[2] = - *next_bus->resource[2]; - - break; + for (i = 0; i < TILE_NUM_PCIE; i++) { + /* + * Do real pcibios init ops if the controller is initialized + * by tile_pci_init() successfully and not initialized by + * pcibios_init() yet to support PCIe hot-plug. + */ + if (pci_scan_flags[i] == 0 && controllers[i].ops != NULL) { + struct pci_bus *root_bus = controllers[i].root_bus; + struct pci_bus *next_bus; + struct pci_dev *dev; + + list_for_each_entry(dev, &root_bus->devices, bus_list) { + /* + * Find the PCI host controller, ie. the 1st + * bridge. + */ + if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && + (PCI_SLOT(dev->devfn) == 0)) { + next_bus = dev->subordinate; + controllers[i].mem_resources[0] = + *next_bus->resource[0]; + controllers[i].mem_resources[1] = + *next_bus->resource[1]; + controllers[i].mem_resources[2] = + *next_bus->resource[2]; + + /* Setup flags. */ + pci_scan_flags[i] = 1; + + break; + } } } - } return 0; @@ -381,7 +408,7 @@ char __devinit *pcibios_setup(char *str) /* * This is called from the generic Linux layer. */ -void __init pcibios_update_irq(struct pci_dev *dev, int irq) +void __devinit pcibios_update_irq(struct pci_dev *dev, int irq) { pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); } |