diff options
| -rw-r--r-- | Documentation/leds-class.txt | 21 | ||||
| -rw-r--r-- | drivers/leds/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/leds/led-class.c | 105 | ||||
| -rw-r--r-- | drivers/leds/led-triggers.c | 2 | ||||
| -rw-r--r-- | drivers/leds/ledtrig-timer.c | 124 | ||||
| -rw-r--r-- | drivers/net/wireless/rt2x00/Kconfig | 3 | ||||
| -rw-r--r-- | include/linux/leds.h | 47 |
7 files changed, 171 insertions, 133 deletions
diff --git a/Documentation/leds-class.txt b/Documentation/leds-class.txt index 8fd5ca2..58b266b 100644 --- a/Documentation/leds-class.txt +++ b/Documentation/leds-class.txt @@ -60,15 +60,18 @@ Hardware accelerated blink of LEDs Some LEDs can be programmed to blink without any CPU interaction. To support this feature, a LED driver can optionally implement the -blink_set() function (see <linux/leds.h>). If implemented, triggers can -attempt to use it before falling back to software timers. The blink_set() -function should return 0 if the blink setting is supported, or -EINVAL -otherwise, which means that LED blinking will be handled by software. - -The blink_set() function should choose a user friendly blinking -value if it is called with *delay_on==0 && *delay_off==0 parameters. In -this case the driver should give back the chosen value through delay_on -and delay_off parameters to the leds subsystem. +blink_set() function (see <linux/leds.h>). To set an LED to blinking, +however, it is better to use use the API function led_blink_set(), +as it will check and implement software fallback if necessary. + +To turn off blinking again, use the API function led_brightness_set() +as that will not just set the LED brightness but also stop any software +timers that may have been required for blinking. + +The blink_set() function should choose a user friendly blinking value +if it is called with *delay_on==0 && *delay_off==0 parameters. In this +case the driver should give back the chosen value through delay_on and +delay_off parameters to the leds subsystem. Setting the brightness to zero with brightness_set() callback function should completely turn off the LED and cancel the previously programmed diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index cc2a88d..56b4b7a 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -10,7 +10,7 @@ menuconfig NEW_LEDS if NEW_LEDS config LEDS_CLASS - tristate "LED Class Support" + bool "LED Class Support" help This option enables the led sysfs class in /sys/class/leds. You'll need this to do anything useful with LEDs. If unsure, say N. diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c index 2606600..211e21f 100644 --- a/drivers/leds/led-class.c +++ b/drivers/leds/led-class.c @@ -81,6 +81,79 @@ static struct device_attribute led_class_attrs[] = { __ATTR_NULL, }; +static void led_timer_function(unsigned long data) +{ + struct led_classdev *led_cdev = (void *)data; + unsigned long brightness; + unsigned long delay; + + if (!led_cdev->blink_delay_on || !led_cdev->blink_delay_off) { + led_set_brightness(led_cdev, LED_OFF); + return; + } + + brightness = led_get_brightness(led_cdev); + if (!brightness) { + /* Time to switch the LED on. */ + brightness = led_cdev->blink_brightness; + delay = led_cdev->blink_delay_on; + } else { + /* Store the current brightness value to be able + * to restore it when the delay_off period is over. + */ + led_cdev->blink_brightness = brightness; + brightness = LED_OFF; + delay = led_cdev->blink_delay_off; + } + + led_set_brightness(led_cdev, brightness); + + mod_timer(&led_cdev->blink_timer, jiffies + msecs_to_jiffies(delay)); +} + +static void led_stop_software_blink(struct led_classdev *led_cdev) +{ + /* deactivate previous settings */ + del_timer_sync(&led_cdev->blink_timer); + led_cdev->blink_delay_on = 0; + led_cdev->blink_delay_off = 0; +} + +static void led_set_software_blink(struct led_classdev *led_cdev, + unsigned long delay_on, + unsigned long delay_off) +{ + int current_brightness; + + current_brightness = led_get_brightness(led_cdev); + if (current_brightness) + led_cdev->blink_brightness = current_brightness; + if (!led_cdev->blink_brightness) + led_cdev->blink_brightness = led_cdev->max_brightness; + + if (delay_on == led_cdev->blink_delay_on && + delay_off == led_cdev->blink_delay_off) + return; + + led_stop_software_blink(led_cdev); + + led_cdev->blink_delay_on = delay_on; + led_cdev->blink_delay_off = delay_off; + + /* never on - don't blink */ + if (!delay_on) + return; + + /* never off - just set to brightness */ + if (!delay_off) { + led_set_brightness(led_cdev, led_cdev->blink_brightness); + return; + } + + mod_timer(&led_cdev->blink_timer, jiffies + 1); +} + + /** * led_classdev_suspend - suspend an led_classdev. * @led_cdev: the led_classdev to suspend. @@ -148,6 +221,10 @@ int led_classdev_register(struct device *parent, struct led_classdev *led_cdev) led_update_brightness(led_cdev); + init_timer(&led_cdev->blink_timer); + led_cdev->blink_timer.function = led_timer_function; + led_cdev->blink_timer.data = (unsigned long)led_cdev; + #ifdef CONFIG_LEDS_TRIGGERS led_trigger_set_default(led_cdev); #endif @@ -157,7 +234,6 @@ int led_classdev_register(struct device *parent, struct led_classdev *led_cdev) return 0; } - EXPORT_SYMBOL_GPL(led_classdev_register); /** @@ -175,6 +251,9 @@ void led_classdev_unregister(struct led_classdev *led_cdev) up_write(&led_cdev->trigger_lock); #endif + /* Stop blinking */ + led_brightness_set(led_cdev, LED_OFF); + device_unregister(led_cdev->dev); down_write(&leds_list_lock); @@ -183,6 +262,30 @@ void led_classdev_unregister(struct led_classdev *led_cdev) } EXPORT_SYMBOL_GPL(led_classdev_unregister); +void led_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + if (led_cdev->blink_set && + led_cdev->blink_set(led_cdev, delay_on, delay_off)) + return; + + /* blink with 1 Hz as default if nothing specified */ + if (!*delay_on && !*delay_off) + *delay_on = *delay_off = 500; + + led_set_software_blink(led_cdev, *delay_on, *delay_off); +} +EXPORT_SYMBOL(led_blink_set); + +void led_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + led_stop_software_blink(led_cdev); + led_cdev->brightness_set(led_cdev, brightness); +} +EXPORT_SYMBOL(led_brightness_set); + static int __init leds_init(void) { leds_class = class_create(THIS_MODULE, "leds"); diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c index f1c00db..c41eb61 100644 --- a/drivers/leds/led-triggers.c +++ b/drivers/leds/led-triggers.c @@ -113,7 +113,7 @@ void led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trigger) if (led_cdev->trigger->deactivate) led_cdev->trigger->deactivate(led_cdev); led_cdev->trigger = NULL; - led_set_brightness(led_cdev, LED_OFF); + led_brightness_set(led_cdev, LED_OFF); } if (trigger) { write_lock_irqsave(&trigger->leddev_list_lock, flags); diff --git a/drivers/leds/ledtrig-timer.c b/drivers/leds/ledtrig-timer.c index 82b77bd..b09bcbe 100644 --- a/drivers/leds/ledtrig-timer.c +++ b/drivers/leds/ledtrig-timer.c @@ -12,73 +12,25 @@ */ #include <linux/module.h> -#include <linux/jiffies.h> #include <linux/kernel.h> #include <linux/init.h> -#include <linux/list.h> -#include <linux/spinlock.h> #include <linux/device.h> -#include <linux/sysdev.h> -#include <linux/timer.h> #include <linux/ctype.h> #include <linux/leds.h> -#include <linux/slab.h> #include "leds.h" -struct timer_trig_data { - int brightness_on; /* LED brightness during "on" period. - * (LED_OFF < brightness_on <= LED_FULL) - */ - unsigned long delay_on; /* milliseconds on */ - unsigned long delay_off; /* milliseconds off */ - struct timer_list timer; -}; - -static void led_timer_function(unsigned long data) -{ - struct led_classdev *led_cdev = (struct led_classdev *) data; - struct timer_trig_data *timer_data = led_cdev->trigger_data; - unsigned long brightness; - unsigned long delay; - - if (!timer_data->delay_on || !timer_data->delay_off) { - led_set_brightness(led_cdev, LED_OFF); - return; - } - - brightness = led_get_brightness(led_cdev); - if (!brightness) { - /* Time to switch the LED on. */ - brightness = timer_data->brightness_on; - delay = timer_data->delay_on; - } else { - /* Store the current brightness value to be able - * to restore it when the delay_off period is over. - */ - timer_data->brightness_on = brightness; - brightness = LED_OFF; - delay = timer_data->delay_off; - } - - led_set_brightness(led_cdev, brightness); - - mod_timer(&timer_data->timer, jiffies + msecs_to_jiffies(delay)); -} - static ssize_t led_delay_on_show(struct device *dev, struct device_attribute *attr, char *buf) { struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct timer_trig_data *timer_data = led_cdev->trigger_data; - return sprintf(buf, "%lu\n", timer_data->delay_on); + return sprintf(buf, "%lu\n", led_cdev->blink_delay_on); } static ssize_t led_delay_on_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t size) { struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct timer_trig_data *timer_data = led_cdev->trigger_data; int ret = -EINVAL; char *after; unsigned long state = simple_strtoul(buf, &after, 10); @@ -88,21 +40,7 @@ static ssize_t led_delay_on_store(struct device *dev, count++; if (count == size) { - if (timer_data->delay_on != state) { - /* the new value differs from the previous */ - timer_data->delay_on = state; - - /* deactivate previous settings */ - del_timer_sync(&timer_data->timer); - - /* try to activate hardware acceleration, if any */ - if (!led_cdev->blink_set || - led_cdev->blink_set(led_cdev, - &timer_data->delay_on, &timer_data->delay_off)) { - /* no hardware acceleration, blink via timer */ - mod_timer(&timer_data->timer, jiffies + 1); - } - } + led_blink_set(led_cdev, &state, &led_cdev->blink_delay_off); ret = count; } @@ -113,16 +51,14 @@ static ssize_t led_delay_off_show(struct device *dev, struct device_attribute *attr, char *buf) { struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct timer_trig_data *timer_data = led_cdev->trigger_data; - return sprintf(buf, "%lu\n", timer_data->delay_off); + return sprintf(buf, "%lu\n", led_cdev->blink_delay_off); } static ssize_t led_delay_off_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t size) { struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct timer_trig_data *timer_data = led_cdev->trigger_data; int ret = -EINVAL; char *after; unsigned long state = simple_strtoul(buf, &after, 10); @@ -132,21 +68,7 @@ static ssize_t led_delay_off_store(struct device *dev, count++; if (count == size) { - if (timer_data->delay_off != state) { - /* the new value differs from the previous */ - timer_data->delay_off = state; - - /* deactivate previous settings */ - del_timer_sync(&timer_data->timer); - - /* try to activate hardware acceleration, if any */ - if (!led_cdev->blink_set || - led_cdev->blink_set(led_cdev, - &timer_data->delay_on, &timer_data->delay_off)) { - /* no hardware acceleration, blink via timer */ - mod_timer(&timer_data->timer, jiffies + 1); - } - } + led_blink_set(led_cdev, &led_cdev->blink_delay_on, &state); ret = count; } @@ -158,60 +80,34 @@ static DEVICE_ATTR(delay_off, 0644, led_delay_off_show, led_delay_off_store); static void timer_trig_activate(struct led_classdev *led_cdev) { - struct timer_trig_data *timer_data; int rc; - timer_data = kzalloc(sizeof(struct timer_trig_data), GFP_KERNEL); - if (!timer_data) - return; - - timer_data->brightness_on = led_get_brightness(led_cdev); - if (timer_data->brightness_on == LED_OFF) - timer_data->brightness_on = led_cdev->max_brightness; - led_cdev->trigger_data = timer_data; - - init_timer(&timer_data->timer); - timer_data->timer.function = led_timer_function; - timer_data->timer.data = (unsigned long) led_cdev; + led_cdev->trigger_data = NULL; rc = device_create_file(led_cdev->dev, &dev_attr_delay_on); if (rc) - goto err_out; + return; rc = device_create_file(led_cdev->dev, &dev_attr_delay_off); if (rc) goto err_out_delayon; - /* If there is hardware support for blinking, start one - * user friendly blink rate chosen by the driver. - */ - if (led_cdev->blink_set) - led_cdev->blink_set(led_cdev, - &timer_data->delay_on, &timer_data->delay_off); + led_cdev->trigger_data = (void *)1; return; err_out_delayon: device_remove_file(led_cdev->dev, &dev_attr_delay_on); -err_out: - led_cdev->trigger_data = NULL; - kfree(timer_data); } static void timer_trig_deactivate(struct led_classdev *led_cdev) { - struct timer_trig_data *timer_data = led_cdev->trigger_data; - unsigned long on = 0, off = 0; - - if (timer_data) { + if (led_cdev->trigger_data) { device_remove_file(led_cdev->dev, &dev_attr_delay_on); device_remove_file(led_cdev->dev, &dev_attr_delay_off); - del_timer_sync(&timer_data->timer); - kfree(timer_data); } - /* If there is hardware support for blinking, stop it */ - if (led_cdev->blink_set) - led_cdev->blink_set(led_cdev, &on, &off); + /* Stop blinking */ + led_brightness_set(led_cdev, LED_OFF); } static struct led_trigger timer_led_trigger = { diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index eea1ef2..4396d4b 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -221,9 +221,6 @@ config RT2X00_LIB_LEDS boolean default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n) -comment "rt2x00 leds support disabled due to modularized LEDS_CLASS and built-in rt2x00" - depends on RT2X00_LIB=y && LEDS_CLASS=m - config RT2X00_LIB_DEBUGFS bool "Ralink debugfs support" depends on RT2X00_LIB && MAC80211_DEBUGFS diff --git a/include/linux/leds.h b/include/linux/leds.h index ba6986a..0f19df9 100644 --- a/include/linux/leds.h +++ b/include/linux/leds.h @@ -15,6 +15,7 @@ #include <linux/list.h> #include <linux/spinlock.h> #include <linux/rwsem.h> +#include <linux/timer.h> struct device; /* @@ -45,10 +46,14 @@ struct led_classdev { /* Get LED brightness level */ enum led_brightness (*brightness_get)(struct led_classdev *led_cdev); - /* Activate hardware accelerated blink, delays are in - * miliseconds and if none is provided then a sensible default - * should be chosen. The call can adjust the timings if it can't - * match the values specified exactly. */ + /* + * Activate hardware accelerated blink, delays are in milliseconds + * and if both are zero then a sensible default should be chosen. + * The call should adjust the timings in that case and if it can't + * match the values specified exactly. + * Deactivate blinking again when the brightness is set to a fixed + * value via the brightness_set() callback. + */ int (*blink_set)(struct led_classdev *led_cdev, unsigned long *delay_on, unsigned long *delay_off); @@ -57,6 +62,10 @@ struct led_classdev { struct list_head node; /* LED Device list */ const char *default_trigger; /* Trigger to use */ + unsigned long blink_delay_on, blink_delay_off; + struct timer_list blink_timer; + int blink_brightness; + #ifdef CONFIG_LEDS_TRIGGERS /* Protects the trigger data below */ struct rw_semaphore trigger_lock; @@ -73,6 +82,36 @@ extern void led_classdev_unregister(struct led_classdev *led_cdev); extern void led_classdev_suspend(struct led_classdev *led_cdev); extern void led_classdev_resume(struct led_classdev *led_cdev); +/** + * led_blink_set - set blinking with software fallback + * @led_cdev: the LED to start blinking + * @delay_on: the time it should be on (in ms) + * @delay_off: the time it should ble off (in ms) + * + * This function makes the LED blink, attempting to use the + * hardware acceleration if possible, but falling back to + * software blinking if there is no hardware blinking or if + * the LED refuses the passed values. + * + * Note that if software blinking is active, simply calling + * led_cdev->brightness_set() will not stop the blinking, + * use led_classdev_brightness_set() instead. + */ +extern void led_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off); +/** + * led_brightness_set - set LED brightness + * @led_cdev: the LED to set + * @brightness: the brightness to set it to + * + * Set an LED's brightness, and, if necessary, cancel the + * software blink timer that implements blinking when the + * hardware doesn't. + */ +extern void led_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness); + /* * LED Triggers */ |