diff options
-rw-r--r-- | Documentation/video4linux/CARDLIST.em28xx | 1 | ||||
-rw-r--r-- | drivers/media/video/em28xx/em28xx-cards.c | 69 | ||||
-rw-r--r-- | drivers/media/video/em28xx/em28xx-dvb.c | 14 | ||||
-rw-r--r-- | drivers/media/video/em28xx/em28xx.h | 1 |
4 files changed, 85 insertions, 0 deletions
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index b03a685..a98a688 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -64,3 +64,4 @@ 66 -> Empire dual TV (em2880) 67 -> Terratec Grabby (em2860) [0ccd:0096] 68 -> Terratec AV350 (em2860) [0ccd:0084] + 69 -> KWorld ATSC 315U HDTV TV Box (em2882) [eb1a:a313] diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index d3b0eb3..00cc791 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -109,6 +109,24 @@ static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = { /* Board - EM2870 Kworld 355u Analog - No input analog */ +/* Board - EM2882 Kworld 315U digital */ +static struct em28xx_reg_seq em2882_kworld_315u_digital[] = { + {EM28XX_R08_GPIO, 0xff, 0xff, 10}, + {EM28XX_R08_GPIO, 0xfe, 0xff, 10}, + {EM2880_R04_GPO, 0x04, 0xff, 10}, + {EM2880_R04_GPO, 0x0c, 0xff, 10}, + {EM28XX_R08_GPIO, 0x7e, 0xff, 10}, + { -1, -1, -1, -1}, +}; + +static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = { + {EM2880_R04_GPO, 0x08, 0xff, 10}, + {EM2880_R04_GPO, 0x0c, 0xff, 10}, + {EM2880_R04_GPO, 0x08, 0xff, 10}, + {EM2880_R04_GPO, 0x0c, 0xff, 10}, + { -1, -1, -1, -1}, +}; + static struct em28xx_reg_seq kworld_330u_analog[] = { {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10}, {EM2880_R04_GPO, 0x00, 0xff, 10}, @@ -1111,6 +1129,38 @@ struct em28xx_board em28xx_boards[] = { .gpio = default_analog, } }, }, + [EM2882_BOARD_KWORLD_ATSC_315U] = { + .name = "KWorld ATSC 315U HDTV TV Box", + .valid = EM28XX_BOARD_NOT_VALIDATED, + .tuner_type = TUNER_THOMSON_DTT761X, + .tuner_gpio = em2882_kworld_315u_tuner_gpio, + .tda9887_conf = TDA9887_PRESENT, + .decoder = EM28XX_SAA711X, + .has_dvb = 1, + .dvb_gpio = em2882_kworld_315u_digital, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, + /* Analog mode - still not ready */ + /*.input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = SAA7115_COMPOSITE2, + .amux = EM28XX_AMUX_VIDEO, + .gpio = em2882_kworld_315u_analog, + .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, + }, { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = em2882_kworld_315u_analog1, + .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = em2882_kworld_315u_analog1, + .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, + } }, */ + }, [EM2880_BOARD_EMPIRE_DUAL_TV] = { .name = "Empire dual TV", .tuner_type = TUNER_XC2028, @@ -1432,6 +1482,8 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM2880_BOARD_KWORLD_DVB_305U }, { USB_DEVICE(0xeb1a, 0xe310), .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD }, + { USB_DEVICE(0xeb1a, 0xa313), + .driver_info = EM2882_BOARD_KWORLD_ATSC_315U }, { USB_DEVICE(0xeb1a, 0xa316), .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U }, { USB_DEVICE(0xeb1a, 0xe320), @@ -1701,6 +1753,17 @@ void em28xx_pre_card_setup(struct em28xx *dev) em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd); break; + case EM2882_BOARD_KWORLD_ATSC_315U: + em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff); + msleep(10); + em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe); + msleep(10); + em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); + msleep(10); + em28xx_write_reg(dev, EM2880_R04_GPO, 0x08); + msleep(10); + break; + case EM2860_BOARD_KAIOMY_TVNPC_U2: em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1); em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1); @@ -2010,6 +2073,12 @@ void em28xx_card_setup(struct em28xx *dev) #endif break; } + case EM2882_BOARD_KWORLD_ATSC_315U: + em28xx_write_reg(dev, 0x0d, 0x42); + msleep(10); + em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd); + msleep(10); + break; case EM2820_BOARD_KWORLD_PVRTV2800RF: /* GPIO enables sound on KWORLD PVR TV 2800RF */ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9); diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index e0438ac..563dd2b 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -25,6 +25,8 @@ #include "em28xx.h" #include <media/v4l2-common.h> #include <media/videobuf-vmalloc.h> +#include <media/tuner.h> +#include "tuner-simple.h" #include "lgdt330x.h" #include "zl10353.h" @@ -451,6 +453,18 @@ static int dvb_init(struct em28xx *dev) goto out_free; } break; + case EM2882_BOARD_KWORLD_ATSC_315U: + dvb->frontend = dvb_attach(lgdt330x_attach, + &em2880_lgdt3303_dev, + &dev->i2c_adap); + if (dvb->frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, dvb->frontend, + &dev->i2c_adap, 0x61, TUNER_THOMSON_DTT761X)) { + result = -EINVAL; + goto out_free; + } + } + break; case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: #ifdef EM28XX_DRX397XD_SUPPORT /* We don't have the config structure properly populated, so diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 2ddd59d..8bf81be 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -105,6 +105,7 @@ #define EM2880_BOARD_EMPIRE_DUAL_TV 66 #define EM2860_BOARD_TERRATEC_GRABBY 67 #define EM2860_BOARD_TERRATEC_AV350 68 +#define EM2882_BOARD_KWORLD_ATSC_315U 69 /* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4 |