diff options
Diffstat (limited to 'build.sh')
| -rwxr-xr-x | build.sh | 203 |
1 files changed, 203 insertions, 0 deletions
diff --git a/build.sh b/build.sh new file mode 100755 index 0000000..81fcaed --- /dev/null +++ b/build.sh @@ -0,0 +1,203 @@ +#!/bin/bash + +BOARD=crespo +DEVICEDIR=/sdcard/AROM +KNAME=kernel.cyano.RELEASE +DEVICE_CM_DIR=$ANDROID_BUILD_TOP/device/samsung/${BOARD} + +WaitForDevice() +{ + adb start-server + if [ $(adb get-state) != device -a $(adb shell busybox test -e /sbin/recovery 2> /dev/null; echo $?) != 0 ] ; then + echo "No device is online. Waiting for one..." + echo "Please connect USB and/or enable USB debugging" + until [ $(adb get-state) = device -o $(adb shell busybox test -e /sbin/recovery 2> /dev/null; echo $?) = 0 ];do + sleep 1 + done + echo "Device Found.." + fi +} + +setup () +{ + if [ x = "x$ANDROID_BUILD_TOP" ] ; then + echo "Android build environment must be configured" + exit 1 + fi + . "$ANDROID_BUILD_TOP"/build/envsetup.sh + + KERNEL_DIR="$(dirname "$(readlink -f "$0")")" + BUILD_DIR="$KERNEL_DIR/build" + + if [ x = "x$NO_CCACHE" ] && ccache -V &>/dev/null ; then + CCACHE=ccache + CCACHE_BASEDIR="$KERNEL_DIR" + CCACHE_COMPRESS=1 + CCACHE_DIR="$BUILD_DIR/.ccache" + export CCACHE_DIR CCACHE_COMPRESS CCACHE_BASEDIR + else + CCACHE="" + fi + + CROSS_PREFIX="$ANDROID_BUILD_TOP/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi-" +} + +CheckVersion () +{ + if [ ! -f .Mayor ] + then + echo 1 > .Mayor + fi + if [ ! -f .Minor ] + then + echo 0 > .Minor + fi + sVersion=$(cat build/${BOARD}/include/config/kernel.release) + echo $sVersion + sVersionMerge=${sVersion:(-8)} + echo sVersionMerge + iMayor=$(cat .Mayor) + iMinor=$(cat .Minor) +} + +CreateKernelZip () +{ + cd bin + rm *.zip + KZIPNAME=$KNAME.v$iMayor.$iMinor.$sVersionMerge.zip + zip $KZIPNAME * -r + if [ "$responseSend" == "y" ] ; then + WaitForDevice + echo Going into fastboot + if adb reboot-bootloader ; then + sleep 4 + echo Pushing kernel file + if fastboot flash zimage kernel/zImage ; then + sleep 1 + fastboot reboot + WaitForDevice + sleep 2 + adb root + sleep 4 + adb remount + sleep 2 + echo Sending modules + for filename in system/modules/* ; do + echo Sending $filename to /system/modules + if adb push $filename /system/modules ; then + echo "Rebooting again" + fi + done + adb reboot + fi + fi + fi + cd .. + echo $KZIPNAME +} + +UpgradeMinor () +{ + iMinor=$(($iMinor+1)) + echo $iMinor > .Minor +} + +CompileError () +{ + echo !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! + echo ! COMPILACION FAILED + echo ! + echo ! + echo ! ---------------------- COMPILACION ERROR CODE: $RET + echo ! + echo ! + echo ! + echo !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! +} + +SenModulesToCMDevice() +{ + CURDIR=`pwd`; + cd bin/system/modules + rm $DEVICE_CM_DIR/KernelModules.mk + echo "# Kernel Modules TO BE COPIED" > $DEVICE_CM_DIR/KernelModules.mk + echo 'PRODUCT_COPY_FILES += \' >> $DEVICE_CM_DIR/KernelModules.mk + MODULEF=( $(find * -type f) ) + # get length of an array + tLen=${#MODULEF[@]} + # use for loop read all modules but not the last + for (( i=0; i<${tLen}-1; i++ )); + do + echo ' device/samsung/'${BOARD}'/'${MODULEF[$i]}':system/modules/'${MODULEF[$i]}' \' >>$DEVICE_CM_DIR/KernelModules.mk + echo ${MODULEF[$i]} + done + echo ' device/samsung/'${BOARD}'/'${MODULEF[$i]}':system/modules/'${MODULEF[$i]} >>$DEVICE_CM_DIR/KernelModules.mk + cd $CURDIR +} + +build () +{ + local target=$1 + echo "Building for $target" + local target_dir="$BUILD_DIR/$target" + local module + [ x = "x$NO_RM" ] + mkdir -p "$target_dir" + [ x = "x$NO_DEFCONFIG" ] && mka -C "$KERNEL_DIR" O="$target_dir" ARCH=arm ${BOARD}_defconfig HOSTCC="$CCACHE gcc" + if [ x = "x$NO_BUILD" ] ; then + mka -C "$KERNEL_DIR" O="$target_dir" ARCH=arm HOSTCC="$CCACHE gcc" CROSS_COMPILE="$CCACHE $CROSS_PREFIX" modules + RET=$? + if [[ $RET == 0 ]] ; then + mka -C "$KERNEL_DIR" O="$target_dir" ARCH=arm HOSTCC="$CCACHE gcc" CROSS_COMPILE="$CCACHE $CROSS_PREFIX" zImage + RET=$? + if [[ $RET == 0 ]] ; then + cp "$target_dir"/arch/arm/boot/zImage bin/kernel/zImage + MODULES=( $(find $target_dir/* -type f -name *.ko) ) + for module in "${MODULES[@]}" ; do + echo $module + cp "$module" bin/system/lib/modules + done + # SenModulesToCMDevice + CheckVersion + CreateKernelZip + UpgradeMinor + else + CompileError + fi + else + CompileError + fi + fi +} + +setup + +echo Type y + \"intro\" to send kernel to your mobile: +read -t 10 responseSend; +if [ "$responseSend" == "y" ] ; then + echo Sending to device after build .. $responseSend +else + echo Only compile .. $responseSend +fi + + +if [ "$1" = clean ] ; then + rm -fr "$BUILD_DIR"/* + exit 0 +fi + +targets=(crespo) + +START=$(date +%s) + +for target in "${targets[@]}" ; do + build $target +done + +END=$(date +%s) +ELAPSED=$((END - START)) +E_MIN=$((ELAPSED / 60)) +E_SEC=$((ELAPSED - E_MIN * 60)) +printf "Elapsed: " +[ $E_MIN != 0 ] && printf "%d min(s) " $E_MIN +printf "%d sec(s)\n" $E_SEC |